broen-lab uniflex™ fittings for water · 2018. 6. 19. · broen-lab uniflextm basic broen-lab...
TRANSCRIPT
-
BR
OEN
-LAB
UN
IFLEXTM FIT
TING
S FOR
WA
TER
BR
OEN
-LAB
UN
IFLEXTM FIT
TING
S FOR
WA
TER
BROEN-LAB UNIFLEX™FITTINGS
FOR WATER
-
Content Page
Table of Contents 2
BROEN-LAB UniFlexTM BASIC 4
Product Overview 5
Water Fittings
Bench Mounted Fitting with Swivel Spout ....................... 6
Bench Fitting Mounted on a Column ................................. 7
Two Valve Bench Mounted Fitting on a U-Shaped Column ............................................................. 8
Two Valve Bench Mounted Fitting on a Tee-shaped Column .......................................................... 9
Bench Mounted Fitting on a Column with Swivel Spout ..................................................................10
Three Valve Bench Mounted Fitting ..........................11
Wall Mounted Fitting ................................................................12
Two Handle Bench Mounted One Hole Mixer with Swivel Spout ...............................13
Suspended 2-Valve Fitting .....................................................14
Single Handle Mixer Bench Mounted ............................16
Single Handle Mixer Bench Mounted with Hand Shower .................................................................17
One Handle Two Hole Mixer with Swivel Spout .......................................................................18
One Handle Mixer with Swivel Spout ...............................19
Wall and Bench Mounted 2-Hole 2-Hand Mixers with Swivel Spout .......................................20
Single Water Fittings ...........................................................21
TA B L E O F C O N T E N T S
BROEN-LAB UniFlexTM Hoses for Water 22-23
HeadworksRubber Headwork for Plastic Handle .........................................................................................................................24
Ceramic Headwork for Wrist Action Lever 24
Accessories / Spare Parts 25-26
Ordering Information BROEN-LAB UniFlexTM Fittings 27
W W W. B R O E N - L A B . C O M- 2 -
BR
OEN
-LAB
UN
IFLEXTM FIT
TING
S FOR
WA
TER
-
W W W. B R O E N - L A B . C O M - 3 -
BR
OEN
-LAB
UN
IFLEXTM FIT
TING
S FOR
WA
TER
-
B R O E N - L A B U N I F L E X T M B A S I C
BROEN-LAB UniFlexTM BASIC line offers high quality and durability combined with the complete program, which adds up to low LCC (Life Cycle Costs).
T H I S I S B R O E N - L A B U N I F L E X ™BROEN-LAB UniFlexTM is a unique and patented connection, which allows customers to choose from various connection methods, such as hoses, Cu, PEX of Stainless Steel pipes, without changing the valve itself. It provides unique flexibility, not only for the installer, but also for the end-user. Due to the flexibility of the system, the quick installation and savings on fit-tings, this system offers lower TIC (Total Installed Costs).
T H I S I S B R O E N - L A B U N I F L E X ™ B A S I C
B R O E N - L A B O F F E R S C U S T O M E R B E N E F I T S
Safe and Simple Installation Complete Range – One Stop Shopping Just-In-Time Deliveries
One Valve – More Connections Approved as a Complete System Fewer Connection Points
Mix & Match - Build your Own Configuration Uniform Design / Dimensions Customization to Meet Customer Needs
Double Sealing 100 % Testing BROEN-LAB POLYCOAT – Powder Coating
M O R E E F F I C I E N C Y
M O R E P L U G & P L AY
M O R E C U S T O M - M A D E
M O R E Q U A L I T Y
➟➟➟➟
The operation and the configuration of the BROEN-LAB UniFlexTM BASIC fittings are highly adapted to the requirements of modern laboratories in the educational sector. The fittings are manufactured of the highest quality materials. The surface of laboratory fittings is treated with BROEN-LAB POLYCOAT powder coating, which makes the surface highly resistant to most chemicals, UV fading and heat. Most BROEN-LAB UniFlexTM BASIC fittings for water are as a standard delivered with a fixed plastic hose nozzle and a plastic handle. As an option it is possible to get water fittings with an integrated check valve, which prevents backflow. The fittings are delivered with easy-to-mount anti-rotational mounting kit.
W W W. B R O E N - L A B . C O M- 4 -
BR
OEN
-LAB
UN
IFLEXTM FIT
TING
S FOR
WA
TER
-
UniFlexTM male
P R O D U C T O V E R V I E W
Plastic handle
Aerator, anti-splash nozzle
Removable plastic nozzle
Fixed plastic nozzle
UniFlexTM female1/2 NPT x 60mm
Stan
dard
leng
th 7
00m
m
UniFlexTM male
OD 10mm Code “B“
OD 15mm Code “H“
G3/8 Code “D“
G1/2 Code “E“
Rubber headworkCheck valve (optional)
BROEN-LAB UNIFLEXTM HOSES
UniFlexTM female
M30 x 1.5 x 60mm
Wrist action lever
W W W. B R O E N - L A B . C O M - 5 -
BR
OEN
-LAB
UN
IFLEXTM FIT
TING
S FOR
WA
TER
-
S P E C I F I C AT I O N SHandle: Plastic, with media indication according to EN13792Spout: Full swivel action Hose nozzle: Fixed plastic (can be unscrewed by hand, thread: male G3/8) Headwork: Rubber (wrist action lever: ceramic)Opening/closing function: 2 x 360° (wrist action lever: 90°)Temperature range: 0-65°CMax. working pressure: 10 bar / 147 psiTest pressure: 1 x working pressure Weight: 1.4 kg
M AT E R I A L S W I T H M E D I A C O N TA C TMetals: BrassPlastics: PP, SPX (hose)Sealing: EPDMLubricant: Silicone basedCeramics: Al2O3 96% (wrist action lever only)
O R D E R I N G I N F O R M AT I O NFor standard configuration please refer to the item numbers below.Other options:- aerator- removable plastic hose nozzle- integrated non-return valve- fixed spout (rear, left or right) - alternative hose inlet connection / without a hose - other inlet options (type, length)- national approvals - WPH (Water Potable Hot) - WNH (Water Non-Potable Hot)
B E N C H M O U N T E D F I T T I N G W I T H S W I V E L S P O U T
Media S = 150mm S = 200mm S = 250mm S = 300mm
Potable water, cold 2534 008 1001-52B 2534 084 1001-52B 2534 085 1001-52B 2534 086 1001-52B
Non-potable water, cold 2534 008 1007-52B 2534 084 1007-52B 2534 085 1007-52B 2534 086 1007-52B
Media S = 150mm S = 200mm S = 250mm S = 300mm
Potable water, cold 2534 087 1001-52B 2534 088 1001-52B 2534 089 1001-52B 2534 083 1001-52B
Non-potable water, cold 2534 087 1007-52B 2534 088 1007-52B 2534 089 1007-52B 2534 083 1007-52B
WPC
WPC
Model: Plastic handle
Model: Wrist action lever
S
300mm
60mm
180mm
M30x1.5
700mm hose with OD 10mm inlet connection
With plastic handle
With wrist action lever
WNC
WNC
For further information and mounting instructions please refer to www.BROEN-LAB.com or contact your local BROEN-LAB representative.
W W W. B R O E N - L A B . C O M- 6 -
BR
OEN
-LAB
UN
IFLEXTM FIT
TING
S FOR
WA
TER
-
B E N C H F I T T I N G M O U N T E D O N A C O L U M N
Media S = 150mm S = 200mm
Potable water, cold 2533 085 1001-52B 2533 097 1001-52B
Non-potable water, cold 2533 085 1007-52B 2533 097 1007-52B
Media S = 150mm S = 200mm
Potable water, cold 2533 095 1001-52B 2533 147 1001-52B
Non-potable water, cold 2533 095 1007-52B 2533 147 1007-52B
WPC
WPC
S P E C I F I C AT I O N SHandle: Plastic, with media indication according to EN13792Hose nozzle: Fixed plastic (can be unscrewed by hand, thread: male G3/8) Headwork: Rubber (wrist action lever: ceramic)Opening/closing function: 2 x 360° (wrist action lever: 90°)Temperature range: 0-65°CMax. working pressure: 10 bar / 147 psiTest pressure: 1 x working pressure Weight: 1.5 kg
M AT E R I A L S W I T H M E D I A C O N TA C TMetals: BrassPlastics: PP, SPX (hose)Sealing: EPDMLubricant: Silicone basedCeramics: Al2O3 96% (wrist action lever only)
O R D E R I N G I N F O R M AT I O NFor standard configuration please refer to the item numbers below.
Other options:- aerator- removable plastic hose nozzle- integrated non-return valve- alternative hose inlet connection / without a hose - other inlet options (type, length)- national approvals - WPH (Water Potable Hot) - WNH (Water Non-Potable Hot)
300mm
60mm
S
220mm
M30x1.5
700mm hose with OD 10mm inlet connection
Model: Plastic handle
Model: Wrist action lever
With plastic handle
With wrist action lever
WNC
WNC
For further information and mounting instructions please refer to www.BROEN-LAB.com or contact your local BROEN-LAB representative.
W W W. B R O E N - L A B . C O M - 7 -
BR
OEN
-LAB
UN
IFLEXTM FIT
TING
S FOR
WA
TER
-
S P E C I F I C AT I O N SHandle: Plastic, with media indication according to EN13792Hose nozzle: Fixed plastic (can be unscrewed by hand, thread: male G3/8)Headwork: Rubber (wrist action lever: ceramic)Opening/closing function: 2 x 360° (wrist action lever: 90°)Temperature range: 0-65°CMax. working pressure: 10 bar / 147 psiTest pressure: 1 x working pressure Weight: 2.5 kg
M AT E R I A L S W I T H M E D I A C O N TA C TMetals: BrassPlastics: PP, SPX (hose)Sealing: EPDMLubricant: Silicone basedCeramics: Al2O3 96% (wrist action lever only)
O R D E R I N G I N F O R M AT I O NFor standard configuration please refer to the item numbers below.Other options:- aerator- removable plastic hose nozzle- integrated non-return valve- alternative hose inlet connection / without a hose - other inlet options (type, length)- national approvals - WPH (Water Potable Hot) - WNH (Water Non-Potable Hot)
T W O V A L V E B E N C H M O U N T E D F I T T I N G O N A U - S H A P E D C O L U M N
Media S = 150mm S = 200mm
Potable water, cold 2533 086 1001-52B 2533 149 1001-52B
Non-potable water, cold 2533 086 1007-52B 2533 149 1007-52B
Media S = 150mm S = 200mm
Potable water, cold 2533 148 1001-52B 2533 150 1001-52B
Non-potable water, cold 2533 148 1007-52B 2533 150 1007-52B
WPC
WPC
Model: Plastic handle
Model: Wrist action lever
With plastichandles
With wrist action levers
WNC
WNC
300mm
60mm
S
220mm
M30x1.5
700mm hose with OD 10mm inlet connection
150mm
For further information and mounting instructions please refer to www.BROEN-LAB.com or contact your local BROEN-LAB representative.
W W W. B R O E N - L A B . C O M- 8 -
BR
OEN
-LAB
UN
IFLEXTM FIT
TING
S FOR
WA
TER
-
T W O V A L V E B E N C H M O U N T E D F I T T I N G O N A T E E - S H A P E D C O M L U M N
Media S = 300mm S = 400mm
Potable water, cold 2533 087 1001-52B 2533 130 1001-52B
Non-potable water, cold 2533 087 1007-52B 2533 130 1007-52B
Media S = 300mm S = 400mm
Potable water, cold 2533 151 1001-52B 2533 152 1001-52B
Non-potable water, cold 2533 151 1007-52B 2533 152 1007-52B
WPC
WPC
S P E C I F I C AT I O N SHandle: Plastic, with media indication according to EN13792Hose nozzle: Fixed plastic (can be unscrewed by hand, thread: male G3/8)Headwork: Rubber (wrist action lever: ceramic)Opening/closing function: 2 x 360° (wrist action lever: 90°)Temperature range: 0-65°CMax. working pressure: 10 bar / 147 psiTest pressure: 1 x working pressure Weight: 2.3 kg
M AT E R I A L S W I T H M E D I A C O N TA C TMetals: BrassPlastics: PP, SPX (hose)Sealing: EPDMLubricant: Silicone basedCeramics: Al2O3 96% (wrist action lever)
O R D E R I N G I N F O R M AT I O NFor standard configuration please refer to the item numbers below.
Other options:- aerator- removable plastic hose nozzle- integrated non-return valve- alternative hose inlet connection / without a hose - other inlet options (type, length)- national approvals - WPH (Water Potable Hot) - WNH (Water Non-Potable Hot)
Model: Plastic handle
Model: Wrist action lever
With wrist action levers
WNC
WNC
With plastic handles
300mm
60mm
S
220mm
M30x1.5
700mm hose with OD 10mm inlet connection
For further information and mounting instructions please refer to www.BROEN-LAB.com or contact your local BROEN-LAB representative.
W W W. B R O E N - L A B . C O M - 9 -
BR
OEN
-LAB
UN
IFLEXTM FIT
TING
S FOR
WA
TER
-
B E N C H M O U N T E D F I T T I N G O N A C O L U M N W I T H S W I V E L S P O U T
S P E C I F I C AT I O N SHandle: Plastic, with media indication according to EN13792Spout: Full swivel actionHose nozzle: U-shape - fixed plastic (can be unscrewed by hand) S-shape - removable plasticHeadwork: Rubber (wrist action lever: ceramic)Opening/closing function: 2 x 360° (wrist action lever: 90°)Temperature range: 0-65°CMax. working pressure: 10 bar / 147 psiTest pressure: 1 x working pressure Weight: 2 kg
M AT E R I A L S W I T H M E D I A C O N TA C TMetals: BrassPlastics: PP, SPX (hose)Sealing: EPDMLubricant: Silicone basedCeramics: Al2O3 96% (wrist action lever)
O R D E R I N G I N F O R M AT I O NFor standard configuration please refer to the item numbers below.
Other options:- aerator- removable plastic hose nozzle (U-shape) - wrist action lever- integrated non-return valve - T = 200mm- alternative hose inlet connection / without a hose - other inlet options (type, length)- national approvals - WPH (Water Potable Hot) - WNH (Water Non-Potable Hot)
Model: Plastic handle S-shape, removable nozzle
Media S = 150mm S = 200mm
Potable water, cold 2533 143 1001-52B 2533 144 1001-52B
Non-potable water, cold 2533 143 1007-52B 2533 144 1007-52B
WPC
WNC
With plastic handle
S T = 150mm
410mm
60mm
300mm
290mm
M30x1.5
700mm hose with OD 10mm inlet connection
For further information and mounting instructions please refer to www.BROEN-LAB.com or contact your local BROEN-LAB representative.
S-shape with plastic handle and removable nozzle
Model: Plastic handle U-shape, fixed nozzle
Media S = 150mm S = 200mm
Potable water, cold 2533 141 1001-52B 2533 142 1001-52B
Non-potable water, cold 2533 141 1007-52B 2533 142 1007-52B
WPC
WNC
W W W. B R O E N - L A B . C O M- 1 0 -
BR
OEN
-LAB
UN
IFLEXTM FIT
TING
S FOR
WA
TER
-
T H R E E V A L V E B E N C H M O U N T E D F I T T I N G
Media S = 150mm
Potable water, cold 2533 094 1001-52B
Non-potable water, cold 2533 094 1007-52B
Media S = 150mm
Potable water, cold 2533 096 1001-52B
Non-potable water, cold 2533 096 1007-52B
WPC
WPC
S P E C I F I C AT I O N SHandle: Plastic, with media indication according to EN13792Spout: Full swivel actionHose nozzle: Fixed plastic (can be unscrewed by hand from angle valves, thread: male G3/8)Headwork: Rubber (wrist action lever: ceramic)Opening/closing function: 2 x 360° (wrist action lever: 90°)Temperature range: 0-65°CMax. working pressure: 10 bar / 147 psiTest pressure: 1 x working pressure Weight: 3 kg
M AT E R I A L S W I T H M E D I A C O N TA C TMetals: BrassPlastics: PP, SPX (hose)Sealing: EPDMLubricant: Silicone basedCeramics: Al2O3 96% (wrist action lever only)Solder: DIN L-Ag55:Sn
O R D E R I N G I N F O R M AT I O NFor standard configuration please refer to the item numbers below.Other options:- aerator- removable plastic hose nozzle- integrated non-return valve- alternative hose inlet connection / without a hose - other inlet options (type, length)- national approvals - WPH (Water Potable Hot) - WNH (Water Non-Potable Hot)
Model: Plastic handle
Model: Wrist action lever
WNC
WNC
With plastic handles
150mm
500mm
60mm
380mm
150mm
M30x1.5
700mm hose with OD 10mm inlet connection
150mm110mm
190mm
For further information and mounting instructions please refer to www.BROEN-LAB.com or contact your local BROEN-LAB representative.
With wrist action levers
W W W. B R O E N - L A B . C O M - 1 1 -
BR
OEN
-LAB
UN
IFLEXTM FIT
TING
S FOR
WA
TER
-
W A L L M O U N T E D F I T T I N G
Media S = 150mm S = 200mm
Potable water, cold 2533 136 1001-52B 2533 137 1001-52B
Non-potable water, cold 2533 136 1007-52B 2533 137 1007-52B
Media S = 150mm S = 200mm
Potable water, cold 2533 138 1001-52B 2533 139 1001-52B
Non-potable water, cold 2533 138 1007-52B 2533 139 1007-52B
WPC
WPC
S P E C I F I C AT I O N SHandle: Plastic, with media indication according to EN13792Hose nozzle: Fixed plastic (can be unscrewed by hand, thread: male G3/8)Headwork: Rubber (wrist action lever: ceramic)Opening/closing function: 2 x 360° (wrist action lever: 90°)Temperature range: 0-65°CMax. working pressure: 10 bar / 147 psiTest pressure: 1 x working pressure Weight: 1.0 kg
M AT E R I A L S W I T H M E D I A C O N TA C TMetals: BrassPlastics: PP , SPX (hose)Sealing: EPDMLubricant: Silicone basedCeramics: Al2O3 96% (wrist action lever only)
O R D E R I N G I N F O R M AT I O NFor standard configuration please refer to the item numbers below.Other options:- aerator- removable plastic hose nozzle- integrated non-return valve- alternative hose inlet connection / without a hose - other inlet options (type, length)- national approvals - WPH (Water Potable Hot) - WNH (Water Non-Potable Hot)
Model: Plastic handle
Model: Wrist action lever
WNC
WNC
80mm
700mm hose with OD 10mm inlet connection
S60mm
For further information and mounting instructions please refer to www.BROEN-LAB.com or contact your local BROEN-LAB representative.
With wrist action lever
With plastic handle M30 x 1.5
W W W. B R O E N - L A B . C O M- 1 2 -
BR
OEN
-LAB
UN
IFLEXTM FIT
TING
S FOR
WA
TER
-
T W O H A N D L E B E N C H M O U N T E D O N E H O L E M I X E R W I T H S W I V E L S P O U T
S P E C I F I C AT I O N SHandle: Plastic, with media indication according to EN13792Spout: Full swivel action Hose nozzle: Fixed plastic (can be unscrewed by hand, thread: male G3/8) Headwork: Rubber (wrist action lever: ceramic)Opening/closing function: 2 x 360° (wrist action lever: 90°)Temperature range: 0-65°CMax. working pressure: 10 bar / 147 psiTest pressure: 1 x working pressureWeight: 1.8 kg
M AT E R I A L S W I T H M E D I A C O N TA C TMetals: BrassPlastics: PP, SPX (hose)Sealing: EPDMLubricant: Silicone basedCeramics: Al2O3 96% (wrist action lever only)
O R D E R I N G I N F O R M AT I O NFor standard configuration please refer to the item numbers below.Other options:- aerator- removable plastic hose nozzle- integrated non-return valve- fixed spout - alternative hose inlet connection / without a hose - OD 10mm Cu pipes- other inlet options- national approvals
S
300mm
60mm
180mm
M30x1.5
2x700mm hoses with OD 10mm inlet connection
Media S = 150mm S = 200mm S = 250mm S = 300mm
Potable water, cold/hot 2536 039 1039-52B 2536 045 1039-52B 2536 046 1039-52B 2536 047 1039-52B
Non-potable water, cold/hot 2536 039 1040-52B 2536 045 1040-52B 2536 046 1040-52B 2536 047 1040-52B
Media S = 150mm S = 200mm S = 250mm S = 300mm
Potable water, cold/hot 2536 041 1039-52B 2536 048 1039-52B 2536 049 1039-52B 2536 050 1039-52B
Non-potable water, cold/hot 2536 041 1040-52B 2536 048 1040-52B 2536 049 1040-52B 2536 050 1040-52B
Model: Plastic handle
Model: Wrist action lever
WNC
WNC
WNH
WNH
WPC
WPC
WPH
WPH
With plastic handles
With wrist action levers
For further information and mounting instructions please refer to www.BROEN-LAB.com or contact your local BROEN-LAB representative.
W W W. B R O E N - L A B . C O M - 1 3 -
BR
OEN
-LAB
UN
IFLEXTM FIT
TING
S FOR
WA
TER
-
S U S P E N D E D 2 - V A L V E F I T T I N G
S P E C I F I C AT I O N SHandle: Plastic, with media indication according to EN13792Hose nozzle: Fixed plastic (can be unscrewed by hand, thread: male G3/8)Headwork: Rubber Opening/closing function: 2 x 360°Temperature range: 0-65°CMax. working pressure: 10 bar / 147 psiTest pressure: 1 x working pressure Weight: 2.5 kg
M AT E R I A L S W I T H M E D I A C O N TA C TMetals: BrassPlastics: PP, SPX (hose)Sealing: EPDMLubricant: Silicone based
O R D E R I N G I N F O R M AT I O NFor standard configuration please refer to the item numbers below.Other options:- aerator- removable plastic hose nozzle- wrist action lever- models with single valve, 2 valves in 90° and 4 valves- alternative hose inlet connection / without a hose - other inlet options (type, length)- national approvals - WPH (Water Potable Hot) - WNH (Water Non-potable Hot)
For further information and mounting instructions please refer to www.BROEN-LAB.com or contact your local BROEN-LAB representative.
Media 2-valve 180°
Potable water, cold 2530 064 1001-52B
Non-potable water, cold 2530 064 1007-52B
WPC
WNC
66mm
126mm
79mm
60mm
With plastic handles
M30x1.5
Model: Plastic handle
60mm
700mm hoses with OD 10mm inlet connection
W W W. B R O E N - L A B . C O M- 1 4 -
BR
OEN
-LAB
UN
IFLEXTM FIT
TING
S FOR
WA
TER
-
W W W. B R O E N - L A B . C O M - 1 5 -
BR
OEN
-LAB
UN
IFLEXTM FIT
TING
S FOR
WA
TER
-
S I N G L E H A N D L E M I X E R B E N C H M O U N T E D
S P E C I F I C AT I O N SHandle: Metal, BROEN-LAB POLYCOAT powder coatedSpout: Swivel action Hose nozzle: AeratorCartridge: Ceramic (temperature and flow regulation type) Opening/closing function: 25°, mixing function: ±45°Temperature range: 0°C - 90°CMax. working pressure: 10 bar / 147 psiTest pressure: 1 x working pressure Weight: 2.4 kg
M AT E R I A L S W I T H M E D I A C O N TA C TMetals: BrassPlastics: POM, PTFE, SPX (hose)Sealing: EPDMLubricant: Silicone basedCeramics: Al2O3 96%
O R D E R I N G I N F O R M AT I O NFor standard configuration please refer to the item numbers below.Other options:- integrated non-return valve - removable and fixed hose nozzles - flow restrictor (5 l/min - alternative hose inlet connections - OD 10mm Cu pipes
Model S = 150mm S = 200mm S = 250mm S = 300mm
2535 038 1035-52B 2535 039 1035-52B 2535 040 1035-52B 2535 041 1035-52B
Media:
For further information and mounting instructions please refer to www.BROEN-LAB.com or contact your local BROEN-LAB representative.
2x700mm hoseswith OD 10mminlet connection
60mm
300mm
210mm
S
M30x1.5
W W W. B R O E N - L A B . C O M- 1 6 -
BR
OEN
-LAB
UN
IFLEXTM FIT
TING
S FOR
WA
TER
-
S I N G L E H A N D L E M I X E R B E N C H M O U N T E D W I T H H A N D S H O W E R
S P E C I F I C AT I O N SHandle: Metal, BROEN-LAB POLYCOAT powder coatedSpout: Swivel action Hose nozzle: AeratorCartridge: Ceramic (temperature and flow regulation type) Opening/closing function: 25°, mixing function: ±45°Temperature range: 0°C - 90°CMax. working pressure: 10 bar / 147 psiTest pressure: 1 x working pressure Weight: 3.0 kg
M AT E R I A L S W I T H M E D I A C O N TA C TMetals: BrassPlastics: POM, PTFE, SPX (hose), ABS Sealing: EPDMLubricant: Silicone basedCeramics: Al2O3 96%
O R D E R I N G I N F O R M AT I O NFor standard configuration please refer to the item numbers below.Other options:- integrated non-return valve - removable and fixed hose nozzles - flow restrictor (5 l/min)
171mm
60mm
60mm
300mm
210mm
S
Model S = 150mm S = 200mm S = 250mm S = 300mm
2535 042 1035-52C 2535 043 1035-52C 2535 044 1035-52C 2535 045 1035-52C
Media:
For further information and mounting instructions please refer to www.BROEN-LAB.com or contact your local BROEN-LAB representative.
M30x1.5
M30x1.5
OD 10mm Cu-pipes
W W W. B R O E N - L A B . C O M - 1 7 -
BR
OEN
-LAB
UN
IFLEXTM FIT
TING
S FOR
WA
TER
-
O N E H A N D L E T W O H O L E M I X E R W I T H S W I V E L S P O U T
Model S = 200mm S = 250mm S = 300mm
Short Handle 2535 010 1035 2535 004 1035 2535 016 1035
Long Handle 2535 007 1035 2535 001 1035 2535 013 1035
Media:
S P E C I F I C AT I O N SHandle: Metal, BROEN-LAB POLYCOAT powder coatedSpout: Swivel action Hose nozzle: AeratorCartridge: Ceramic (temperature and flow limiting type) Opening/closing function: 25°, mixing function: ±45°Temperature range: 0°C - 90°CMax. working pressure: 10 bar / 147 psiTest pressure: 1 x working pressure Inlets: Eccentric couplings with male G1/2Weight: 1.5 kg
M AT E R I A L S W I T H M E D I A C O N TA C TMetals: BrassPlastics: POM, PTFE, SPX (hose)Sealing: EPDMLubricant: Silicone basedCeramics: Al2O3 96%
O R D E R I N G I N F O R M AT I O NFor standard configuration please refer to the item numbers below.
Other options:- removable hose nozzle - bench mounted model - different inlet connections (with BROEN-LAB UniFlexTM rear wall connection, lead-in. etc)
With long handle
For further information and mounting instructions please refer to www.BROEN-LAB.com or contact your local BROEN-LAB representative.
W W W. B R O E N - L A B . C O M- 1 8 -
BR
OEN
-LAB
UN
IFLEXTM FIT
TING
S FOR
WA
TER
218mm
150mm
S
With short handle
78mm
-
O N E H A N D L E M I X E R W I T H S W I V E L S P O U T
Model S = 200mm
Short Handle G350328135
Long Handle G350318135
Media:
S P E C I F I C AT I O N SHandle: Metal, BROEN-LAB POLYCOAT powder coated Spout: 110° limited swivel action Hose nozzle: Removable plastic (aerator included)Cartridge: Ceramic (temperature and flow limiting type) Opening/closing function: 25°, mixing function: ±45° Temperature range: 0°C - 65°CMax. working pressure: 10 bar / 147 psiWeight: 2.8 kg
M AT E R I A L S W I T H M E D I A C O N TA C TMetals: BrassPlastics: PP, POM, PTFE, SPX (hose)Sealing: EPDMLubricant: Silicone basedCeramics: Al2O3 96%
O R D E R I N G I N F O R M AT I O NFor standard configuration please refer to the item numbers below.
Other options:
- no swivel action
- full swivel action
385mm
230mm
2x900mm hoses with OD 10mm inlet connection
M28x1.5
60mm
For further information and mounting instructions please refer to www.BROEN-LAB.com or contact your local BROEN-LAB representative.
W W W. B R O E N - L A B . C O M - 1 9 -
BR
OEN
-LAB
UN
IFLEXTM FIT
TING
S FOR
WA
TER
With long handle
With short handle
218mm
200mm
120mm
-
W A L L A N D B E N C H M O U N T E D 2 - H O L E 2 - H A N D L E M I X E R S W I T H S W I V E L S P O U T
S P E C I F I C AT I O N SHandle: Plastic, with media indication according to EN13792Hose nozzle: Fixed plastic (can be unscrewed by hand, thread: male G3/8)Headwork: Rubber Opening/closing function: 2 x 360°Temperature range: 0-65°CMax. working pressure: 10 bar / 147 psiTest pressure: 1 x working pressure Weight: 1.7 kg M AT E R I A L S W I T H M E D I A C O N TA C T Metals: Brass Plastics: PP, SPX (hose) Sealing: EPDM Lubricant: Silicone based Ceramics: Al2O3 96%
O R D E R I N G I N F O R M AT I O NFor standard configuration please refer to the item numbers below.
Other options:
- aerator - flow restrictor (5 l/min) - integrated check valve - fixed spout - S-spout for wall mounted model - wrist action lever - other options for hose inlet connections
For further information please contact your local BROEN-LAB representative.
150mm
60mm
Wall mounted model
S
Media S = 150mm S = 200mm S = 250mm S = 300mm
Potable water, cold/hot 2536 279 1039-52B 2536 215 1039-52B 2536 280 1039-52B 2536 281 1039-52B
Non-potable water, cold/hot 2536 279 1040-52B 2536 215 1040-52B 2536 280 1040-52B 2536 281 1040-52B
Media S = 150mm S = 200mm S = 250mm S = 300mm
Potable water, cold/hot 2536 274 1039-52B 2536 214 1039-52B 2536 275 1039-52B 2536 276 1039-52B
Non-potable water, cold/hot 2536 274 1040-52B 2536 214 1040-52B 2536 275 1040-52B 2536 276 1040-52B
Model: Wall mounted
Model: Bench mounted
WNC
WPC
WNC
WPC
WNH
WPH
WNH
WPH
700mm hose with OD 10mm inlet connection
M30x1.5
116mm
For further information and mounting instructions please refer to www.BROEN-LAB.com or contact your local BROEN-LAB representative.
Bench mounted model
700mm hose with OD 10mm inlet connection
180mm
S
116mm
60mm
M30x1.5
W W W. B R O E N - L A B . C O M- 2 0 -
BR
OEN
-LAB
UN
IFLEXTM FIT
TING
S FOR
WA
TER
-
S I N G L E W AT E R F I T T I N G S
For further information and mounting instructions please refer to www.BROEN-LAB.com or contact your local BROEN-LAB representative.
Materials with medium contact:
Metals: Brass
Plastics: PP
Sealing: EPDM
Lubricant: Based on silicone
No. 2530 317 10xx-08 (S=50mm)No. 2530 315 10xx-08 (S=75mm) Valve for suspended or wall mounting with a plastic handle, a rubber headwork and a fixed plastic nozzle (can be unscrewed by hand).
For media XX and other inlet options please refer to page 27 or contact your BROEN-LAB sales representative.
Materials with medium contact:
Metals: Brass
Plastics: PP
Sealing: EPDM
Lubricant: Based on silicone
No. 2532 199 10xx-08 Valve for suspended or wall mounting with a plastic handle, a rubber headwork and a fixed plastic nozzle (can be unscrewed by hand).
For media XX and other inlet options please refer to page 27 or contact your BROEN-LAB sales representative.
75 mm
122 mm
60 mm
G1/2”
80 mm
60 mm
S
60 mm
G1/2”
N E W M O D E L S A R E A V A I L A B L E
Please contact your BROEN-LAB representative for more informa-tion!
W W W. B R O E N - L A B . C O M - 2 1 -
BR
OEN
-LAB
UN
IFLEXTM FIT
TING
S FOR
WA
TER
-
B R O E N - L A B U N I F L E X T M H O S E S F O R W AT E R
BROEN-LAB offers BROEN-LAB UniFlexTM hoses as an easy way to make the installation in the laboratory where safety and efficiency are required. BROEN-LAB UniFlexTM hoses are the ideal solution where there is a higher requirement for flexibility. Installation with flexible hoses saves you time and labor - in other words reduced installation costs.
A wide range of fittings and lengths available for BROEN-LAB UniFlexTM hoses enables customers to choose the perfect hose for their application.
BROEN-LAB UniFlexTM hoses for water are manufactured of soft cross-linked polyethylene (SPX), which is approved for use with drinking water and meets all hygienic requirements. From the outside the hose is secured by a Stainless Steel braiding that ensures long service life and durability.
If you still prefer a standard way of installation with Cu, Stainless Steel, or PEX-pipes, BROEN-LAB offers a wide range of connection fittings and adaptors for pipes of different dimensions.
BROEN-LAB UniFlexTM connection fittings and adaptors for Cu, Stainless Steel and PEX pipes
BROEN-LAB UniFlexTM flexible hoses
For further information and mounting instructions please refer to www.BROEN-LAB.com or contact your local BROEN-LAB representative.
W W W. B R O E N - L A B . C O M- 2 2 -
BR
OEN
-LAB
UN
IFLEXTM FIT
TING
S FOR
WA
TER
-
9 3 V - B R O E N - L A B U N I F L E X T M S P X H O S E S F O R W AT E R
W W W. B R O E N - L A B . C O M - 2 3 -
BR
OEN
-LAB
UN
IFLEXTM FIT
TING
S FOR
WA
TER
W W W. B R O E N - L A B . C O M - 5 -
BR
OEN
-LAB
UN
IFLEXTM FLEX
IBLE P
IPES A
ND
HO
SES
E X A M P L E O F H O S EC O N F I G U R AT I O N
1200mm hose with OD 12mminlet connection and straightUniFlexTM outlet connection
93V12201200
➟*
*
M10x1mm short connection with EPDM O-ring (Code 51)
PLEASE NOTE:M10 connections can only be used to
mixer and multimedia fittings
Straight BROEN-LAB UniFlex™ connec-tion with EPDM O-ring (Code 20)
45° BROEN-LAB UniFlex™ connection with EPDM O-ring (Code 25)
90° BROEN-LAB UniFlex™ connection with EPDM O-ring (Code 30)
*
*
Male G3/8 fixed connection (Code 32)
Male G1/2 fixed connection (Code 31)
Male G3/4 fixed connection (Code 33)
Female G3/8 union nut connection (Code 41)
Female G1/2 union nut connection (Code 40)
Female G3/4 union nut connection (Code 42)
OD10mm connection for compression fittings (Code 10)
OD12mm connection for compression fittings(Code 12)
OD15mm connection forcompression fittings (Code 15)
OD15mm connection forpress fittings (Code 65)
Straight BROEN-LAB UniFlexTM connec-tion with EPDM O-ring (Code 20)
45° BROEN-LAB UniFlexTM connection with EPDM O-ring (Code 25)
90° BROEN-LAB UniFlexTM connection with EPDM O-ring (Code 30)
I N L E T C O N N E C T I O N S 93 V XX XX XXXX
O U T L E T C O N N E C T I O N S93 V XX XX XXXX
*
*
*
W W W. B R O E N - L A B . C O M - 5 -
BR
OEN
-LAB
UN
IFLEXTM FLEX
IBLE P
IPES A
ND
HO
SES
S P E C I F I C AT I O N SInner hose material: SPX (soft PEX)Braiding: Stainless steel with onegreen stripeMaterials with media contact: SPX, brass, EPDM and silicone based lubricantSealing: EPDM, Aramid fiber/NBRInside diameter: 8.2mmOutside diameter: 12mmMax. working pressure: 10 barMax. working temperature: 90°CBending radius (inner): ≥ 40mmMin. length with connections: 160mm
I N L E T C O N N E C T I O N S 93 V XX XX XXXX
O U T L E T C O N N E C T I O N S93 V XX XX XXXX
*Standard lengths of hoses (L):
0500 = 500mm 0700 = 700mm 1000 = 1000mm 1200 = 1200mm 1500 = 1500mm 2000 = 2000mm 2500 = 2500mm 3000 = 3000mm
Length tolerance of hoses:L = ≤400mm (- 0, +10mm)
L = 401mm to 1000mm (- 0, + 20mm)L = >1000mm (- 0, + 30mm)
H O S E L E N G T H S
SPX hose with braidingin stainless steel
Marking for water with Part no. and Media indication
Definition of length (L)
Definition of length (L)
If 45° and 90° elbows occuron the same hose, it will as
default be mounted in U-form
H O S E93 V XX XX XXXX
*All O-rings are lubricated withsilicone based lubricant
9 3 V - B R O E N - L A B U N I F L E X T M S P X H O S E S F O R W AT E R
* Other lengths are available on request
-
S P E C I F I C AT I O N SBROEN-LAB UniFlexTM water fittings with plastic handles are delivered with rubber headworks. Water fittings with rubber headwork offer quick and precise adjustment and a long service life.Opening/closing function: 2 x 360° turnMedia: Hot/cold waterTemperature range: Please refer to the individual fitting Max. working pressure: 10 bar / 147 psi
M AT E R I A L S W I T H M E D I A C O N TA C TMetals: BrassSealing: EPDM Lubricant: Silicone based
bar
kPa
l/min
F L O W C H A R T
R U B B E R H E A D W O R K P L A S T I C H A N D L E
Rubber headwork
C E R A M I C H E A D W O R K W R I S T A C T I O N L E V E R
bar
kPa
l/min
F L O W C H A R T
Ceramic headwork
S P E C I F I C AT I O N SBROEN-LAB UniFlexTM PREMIUM water fittings with wrist ac-tion lever are delivered with a ceramic 90° turn headwork.
Opening/closing function: 90° turnMedia: Hot/cold waterTemperature range: Maximum 90°CMax. working pressure: 10 bar / 147 psi Test pressure: 1 x working pressure
M AT E R I A L S W I T H M E D I A C O N TA C TMetals: BrassSealing: EPDM Plastics: POMLubricant: Silicone based Ceramics: Al-oxyd 96%
O R D E R I N G I N F O R M AT I O NLEFT TURN CLOSING RIGHT TURN CLOSING Ceramic headwork Ceramic headwork No. 1976400 No. 1976500
O R D E R I N G I N F O R M AT I O NRubber headwork No. 1977000
W W W. B R O E N - L A B . C O M- 2 4 -
BR
OEN
-LAB
UN
IFLEXTM FIT
TING
S FOR
WA
TER
-
Illustration Description BROEN-LAB item No.
Adaptor for aerator M19x1 - M22x1 2539 005 1001 (fits 2534- and 2536-models) G3/8A - M22x1 2539 064 1001 (fits angle valves and elder spouts)
Aerator Thread: M22x1 2539 006 1001 Thread: female G1/2 19 025 009
Adaptor for removable plastic nozzle M19x1 - G 1/2 2539 003 1001 G3/8 - G1/2 2539 048 1001
Removable plastic nozzle 2539 004 1001 (thread: female G1/2)
Fixed plastic nozzle Thread: M19x1 2539 010 1001 Thread: G3/8 2539 040 1001
Water jet filter pump (inlet: union nut G3/4, adapter to female G1/2 is included) 19 199 009
Mounting set for G1/2 connection 19141000
1/2”NPT inlet with female BROEN-LAB UniFlexTM connection (incl. O-ring) L=30mm 1550233V L=60mm 1527454V L=90mm 1550246V
Mounting set for M30x1,5 connection 19 190 000
Threaded inlet pipe M30x1,5 L=30mm 1919003 L=60mm 1919002 L=90mm 1919004
A C C E S S O R I E S / S P A R E P A R T S
LL
19 199.009Wasserstrahlpumpe – Water Jet Filter Pump
GebrauchsanleitungBitte vor Gebrauch sorgfältig lesenund alle Bedienungs- und Sicherheitshinweise befolgen!
Operating ManualPlease read carefully before use,and follow all operating and safety instructions!
BROEN-LAB A/SDrejervænget 2 • DK-5610 Assens
Tel. +45 6471 2095 • Fax +45 6471 2476 www.BROEN-LAB.com94
G0170
212mm
62mm
W W W. B R O E N - L A B . C O M - 2 5 -
BR
OEN
-LAB
UN
IFLEXTM FIT
TING
S FOR
WA
TER
-
A C C E S S O R I E S / S P A R E P A R T S
Illustration Description BROEN-LAB item No.
Plastic handle with media indication 191501401001 (WPC) according to EN 13792 191501401002 (WPH) 191501401007 (WNC) 191501401008 (WNH)
Wrist action lever (handle only) 1916433G-5168 (green)
W W W. B R O E N - L A B . C O M- 2 6 -
BR
OEN
-LAB
UN
IFLEXTM FIT
TING
S FOR
WA
TER
-
O R D E R I N G I N F O R M AT I O NB R O E N - L A B U N I F L E X T M F I T T I N G S
Generally, item number for BROEN-LAB UniFlex fittings has the following structure:
25 XX XXX 10 XX - XX X
BROEN-LAB Series no.
Models 30 - Angle valves 32 - Straight valves 33 - Valves on a column 34 - One handle water fittings 35 - One handle mixers 36 – Two handle mixers
Serial number
*Country code 10 - International 30 - Japan 80 - Denmark 81 - Germany 82 - UK 83 - Benelux 84 - Australia
Hose type blank - none B - 0.7m with OD10mm C - Cu pipes D - 0.7m with G3/8 union nut E - 0.7m with G1/2 union nut H - 0.7m with OD15mm
Inlet type 05 - 30mm, 1/2”NPT -BROEN-LAB UniFlexTM
14 - 60mm, 1/2”NPT-BROEN-LAB UniFlexTM
18 - 90mm, 1/2”NPT-BROEN-LAB UniFlexTM
02 - 30mm, G1/2-Ø14,7x6,4 (EN200 type C)
08 - 60mm, G1/2-Ø14,7x6,4 (EN200 type C) 17 - 90mm, G1/2-Ø14,7x6,4 (EN200 type C)
50 - 30mm, M30x1.5 52 - 60mm, M30x1.5 54 - 90mm, M30x1.5
Media code
01 - Water potable, cold (WPC)
02 - Water potable, hot (WPH)
07 - Water non-potable, cold (WNC)
08 - Water non-potable, hot (WNH)
35 - Tempered water (one handle mixer)
39 - Water potable (WPC /WPH)
40 - Water non-potable (WNC /WNH)
WNC
WNH
WPC
WPH
WNC WNH
WPC WPH
* For water some national standards may apply, therefore contact your BROEN-LAB representative for more information.
W W W. B R O E N - L A B . C O M - 2 7 -
BR
OEN
-LAB
UN
IFLEXTM FIT
TING
S FOR
WA
TER
-
INTERNATIONAL OFFICES
BROEN-LAB Ltd. Unit 9 Navigation Point, Golds Hill WayTipton • West Midlands DY4 OPY • U.K.Tel.: +44 121 522 4515 • Fax +44 121 522 4535E-mail: [email protected]
BROEN-LAB Singapore Pte. Ltd. 10 Bukit Batok Crescent #10-02 • The Spire • Singapore 658079Tel.: +65 6298 0662 • Fax: +65 6298 0468 E-mail: [email protected]
HEAD OFFICE
BROEN-LAB A/SDrejervænget 2 • DK-5610 AssensTel.: +45 6376 6376 • Fax +45 6471 2476 E-mail: [email protected]
BROEN-LAB GmbHTel.: +45 6376 6376 • Fax +45 6471 2476 E-mail: [email protected]
BROEN-LAB Sverige ABTel.: +45 6376 6376 • Fax +45 6471 2476 E-mail: [email protected]
BROEN-LAB Inc.15 Constitution Drive Suite 122 • Bedford • NH 03110 • USATel.: +1 603 310 5089 E-mail: [email protected]
www.BROEN-LAB.com
BROEN-LAB A/S ISO 9001 certi� cation In September 1991 BROEN-LAB A/S was certi� ed according to ISO 9001 as one of the � rst Danish companies. The certi� cation was carried out by Bureau Veritas, Denmark, for our Danish site in Assens.The quality management system of BROEN-LAB A/S now complies with detailed speci� cations laid down by the internationally acknowledged EN ISO 9001:2008. This certi� cation will further contribute to reputation for quality and reliability of BROEN-LAB A/S.
BROEN-LAB develops, manufactures and sells Laboratory Fittings, Emergency Shower Systems and Eye Wash Systems into a broad spectrum of laboratories and industrial loca-tions; sectors include Pharmaceutical, Food&Beverage and Academia. Our expertise and product quality ensure optimal solutions compliant to all relevant international norms setting new standards in risk mitigation in modern research and development facilities.
BROEN-LAB offer solutions that ensure the functionality,compliance, hygiene, durability and safety are of the highest priority. For over 50 years our products have been integrated into a wide variety of workplaces, laboratories, hospitals and industrial locations, with features that are assessed and de-signed to be flexible, durable and compliant offering a broad range of options tailored to each location. This inherent design integrity provides confidence in the solution adopted wherever in the world these are applied.
BROEN-LAB is a collaboration partner in the design andlayout of your next laboratory and it’s integrated safetysolutions.
99B0
055
- BRO
EN-L
AB
UN
IFLE
XTM
FIT
TIN
GS
FOR
WAT
ER -
BASI
C -
30-1
1-20
15 (L
:081
7)