bsc6910 gsm v100r015c00spc500 alarm changes(singleom model vs legacy model) 02(2013!04!28)

Issue 01

Date 2013/05/04

HUAWEI TECHNOLOGIES CO., LTD.

BSC6910 GSMV100R015C00SPC500

Alarm Changes

Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

Notice

Huawei Technologies Co., Ltd.

Address:

Web site: http://www.huawei.com

Email:

All other trademarks and trade names mentioned in this document are the property of their respective holders.

The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Industrial BaseBantian, LonggangShenzhen 518129People's Republic of China

[email protected]

mailto:[email protected]

Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

Huawei Technologies Co., Ltd.

http://www.huawei.com

The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied.

Purpose

Intended Audience

Structure

Alarm Disuse Statement

Alarm ID ID of the alarm that will be phased out.

Alarm Name Name of the alarm that will be phased out.

Disuse Statement Describes how an alarm will be phased out and how the system will handle the alarm.

Disuse Reason Reasons why an alarm will be phased out.

Alarm Change StatementChange Type Alarm change type, for example, added, modified, or deleted.

Alarm ID ID of the changed alarm in a new version.

Alarm Name Name of the changed alarm in a new version.

Change Description Alarm changes between the old and new versions.

Impact on NBI Data Impact of alarm changes on northbound interface (NBI) data.

Change Reason Reasons why an alarm was changed.

The Alarm Disuse Statement in this document describes the alarms that will be phased out in later versions.The Alarm Change Statement in this document provides alarm changes between different BSC6910 GSM versions.

This document is intended for: Field engineers System engineers Network operators Network planners

ID of the alarm that will be phased out.

Name of the alarm that will be phased out.

Describes how an alarm will be phased out and how the system will handle the alarm.

Reasons why an alarm will be phased out.

Alarm change type, for example, added, modified, or deleted.

ID of the changed alarm in a new version.

Name of the changed alarm in a new version.

Alarm changes between the old and new versions.

Impact of alarm changes on northbound interface (NBI) data.

Reasons why an alarm was changed.

The Alarm Disuse Statement in this document describes the alarms that will be phased out in later versions.The Alarm Change Statement in this document provides alarm changes between different BSC6910 GSM versions.

This document is intended for: Field engineersSystem engineersNetwork operatorsNetwork planners

document.xls 文档密级：

04/17/2023 华为机密，未经许可不得扩散第7页，共15页

Alarm ID Alarm Name Disuse Statement

None

Change Type Alarm ID Alarm Name

Modified 25600

Modified 25721

Modified 25885 IP Address Conflict

Modified 25891 IKE Negotiation Failure

Modified 25899 BFD Session Fault

Modified 26236

Alarm Disuse Statementof BSC6910 V100R015C00SPC500 SingleOM Model Compared with Legacy Model

Alarm Changesof BSC6910 V100R015C00SPC500 SingleOM Model Compared with Legacy Model

Monitoring Device Maintenance Link Failure

CCU-BBU Communication Failure

RRU Cascading Levels and Configuration Mismatch



Modified 26237 RRU Network Breakpoint

Modified 26238

Modified 26240

Modified 26501

Modified 26502

Modified 26503

Modified 26507

Modified 26504

Modified 26506

RRU Network Topology Type and Configuration Mismatch

BBU Topology and Configuration Mismatch

RF Unit Optical Module or Electrical Port Not Ready

RF Unit Optical Module Type Mismatch

RF Unit Optical Module Transmit/Receive Fault

RF Unit Optical Module Fault

RF Unit CPRI Interface Error

RF Unit Optical Interface Performance Degraded



Modified 26530

Modified 26531

Modified 26541

Modified 26751 RET Antenna Motor Fault

Modified 26752 ALD Hardware Fault

Modified 26753

Modified 26754 RET Antenna Data Loss

Modified 26755 TMA Bypass

Modified 26757

Modified 26758

RF Unit ALD Current Out of Range

RF Unit ALD Switch Configuration Mismatch

ALD Maintenance Link Failure

RET Antenna Not Calibrated

RET Antenna Running Data and Configuration Mismatch

TMA Running Data and Configuration Mismatch



Disuse Statement

Change Description

of BSC6910 V100R015C00SPC500 SingleOM Model Compared with Legacy Model

of BSC6910 V100R015C00SPC500 SingleOM Model Compared with Legacy Model

Change description: Alarm parameters Communication Address and Connect Port No. are renamed alarm parameters Address and Manager Port No., respectively.Alarm change description after the upgrade: None.How to prevent the alarm: None.Handling suggestions: None.

Change description: Alarm parameter Radio Access Technology is renamed alarm parameter Connected RAT.Alarm change description after the upgrade: None.How to prevent the alarm: None.Handling suggestions: None.

Change description: Alarm parameters Interface Type and Interface No. are renamed alarm parameters Port Type and Port No., respectively.Alarm change description after the upgrade: None.How to prevent the alarm: None.Handling suggestions: None.

Change description: Alarm parameter Peer Name is renamed alarm parameter Peer Name Index.Alarm change description after the upgrade: None.How to prevent the alarm: None.Handling suggestions: None.

Change description: Alarm parameter BFD No. is renamed alarm parameter Session ID.Alarm change description after the upgrade: None.How to prevent the alarm: None.Handling suggestions: None.

Change description: Alarm parameters Chain Level, RRU Chain No. and Configured cascading levels are renamed alarm parameters Actual Chain Level, Chain No. and Configured Chain Level, respectively.Alarm change description after the upgrade: None.How to prevent the alarm: None.Handling suggestions: None.



Change description: Alarm parameter RRU Chain No. is renamed alarm parameter Chain No..Alarm change description after the upgrade: None.How to prevent the alarm: None.Handling suggestions: None.

Change description: Alarm parameter RRU Chain No. is renamed alarm parameter Chain No..Alarm change description after the upgrade: None.How to prevent the alarm: None.Handling suggestions: None.

Change description: Alarm parameters Cabinet No., Subrack No., Slot No., Slot No. of the Upper-Level Board, and Port No. of the Upper-Level Board are renamed alarm parameters Local Cabinet No., Local Subrack No., Slot No., Upper Slot No., and Upper Port No., respectively.Alarm change description after the upgrade: None.How to prevent the alarm: None.Handling suggestions: None.

Change description: Alarm parameter Port is renamed alarm parameter Port No..Alarm change description after the upgrade: None.How to prevent the alarm: None.Handling suggestions: None.








Change description: Alarm parameter Antenna Port is renamed alarm parameter Antenna Port No..Alarm change description after the upgrade: None.How to prevent the alarm: None.Handling suggestions: None.

Change description: Alarm parameter Antenna Port is renamed alarm parameter Antenna Port No..Alarm change description after the upgrade: None.How to prevent the alarm: None.Handling suggestions: None.

Change description: Alarm parameter ALD No. is renamed alarm parameter Device No..Alarm change description after the upgrade: None.How to prevent the alarm: None.Handling suggestions: None.










Disuse Statement Disuse Reason

Impact on NBI Data Change Reason

Yes

Yes

Yes

Yes

Yes

Yes

The operation and maintenance of BTSs in GSM, UMTS, and LTE networks are integrated, standardizing the alarm parameter name.








Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes












Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes











bsc6910 gsm v100r015c00spc500 alarm changes(singleom model vs legacy model) 02(2013!04!28)

Documents