bucket elevator - sudenga industries...dent on bucket elevator size. d reinforced inspec - tion...
TRANSCRIPT
MOTOR MOUNTS are located between the trunking sections to save space on the head ser-vice platform while providing convenient access to the motor and drive. Channel irons provide mounts for pre-welded platforms for quick and easy installation.
PLATFORMS &MOTOR MOUNT
B
CROWNED WING STYLE BOOT PULLEYS are standard in all sizes of legs. Pulleys ride on heavy duty shafts with heavy duty double tapered pillow block bearings*.
BOOT SECTION
UPSIDE BOOT HOPPERdirects material flow for
proper bucket fill
DOWN SIDE BOOT HOPPERsecondary hopper for additional fill option
HINGED INSPECTION DOORlocated for quick inspection
of components. Gasketed and sealed to prevent dust leaks.
BEARING AND SEALHeavy duty bearings* sized for the job. A UHMW seal eliminates dust leakage.
SCREW TAKE-UPgenerously sized for maximum pulleyadjustment. Designed for rugged duty.
ANGLED BOOT CLEANOUT
angled to promote boot cleanout with
cups. Easily removed for
clean out access.
*Bearings: Medium 24” Legs and larger have spherical double roller pillow block bearings. “C” and Junior Legs have sealed pillow block ball bearings.
BOOT CONSTRUCTIONBoot specifications vary from 10 gauge to 7 gauge depen-dent on bucket elevator size.
D
Reinforced INSPEC-TION STATIONS ensure trunk integ-rity when remov-able covers are off. Inspection ports can be positioned in four different loca-tions by rotating the section and cover, allowing for easier ongoing inspection and maintenance.
C INSPECTION SECTION AND TRUNKING
A
B
C
D
CROWNED DRUM STYLE PULLEYSwith SCOF vulcanized lagging are stan-
dard, pulleys with removable slide lagging (shown), are available. Head shafts are
turned, ground and polished head shafts
PRESSURE-RELIEF PANELdesigned to meet
NFPA standards
MULTIPLE PIECE HOOD ASSEMBLYallows for ease of maintenance
HEAVY DUTY POLYETHYLENE BUCKETS
are lightweight, resist bending and breaking
RUBBER BELTINGstays flexible in
cold weather
OVERSIZE INSPECTION PANELallows for easy inspection and maintenance
HEAD SECTION
GENTLE DISCHARGEdesigned for optimum discharge angle
WEATHER TIGHT LIP SEAL
provides protection from the elements
TORQUE ARM BRACKETheavy duty to ensure
proper speed reducer torque arm support
BEARING AND SHAFT SEALUHMW seal, internally mounted for weather tight seal. Bearing cover minimizes direct moisture access to bearing.
BEARING AND SHAFTHeavy duty double row pillow block bearings* with jacking bolts and gussets to ensure turned ground and polished head shaft runs true and level.
DISCHARGE LININGa variety of lining options available. Lined with 1/4” urethane backed by 16 ga. steel on Senior Series Legs.
HINGED INSPECTION DOORwith over center clamp
A
LADDER HANDLESconveniently located forentering head platform.
BUCKET ELEVATORC O M P O N E N T S