budgeting nmi budgeting for maintenance and development of national measurement standards and
DESCRIPTION
Strengthening of State Executive in Czech Republic in the field of metrology Budgeting NMi Cor van der Ploeg TwL project CZ2003/005-601.08.09.02. Budgeting NMi Budgeting for maintenance and development of national measurement standards and surveillance on MI’s in use Brno, CMI, April 2006 - PowerPoint PPT PresentationTRANSCRIPT
Strengthening of State Executive in Czech Republic in the field of
metrology
Budgeting NMi
Cor van der PloegTwL project CZ2003/005-
601.08.09.02
Budgeting NMi
Budgeting for maintenance and development of
national measurement standards and
surveillance on MI’s in use
Brno, CMI, April 2006Cor van der Ploeg
Cz Brno, April 2005 Butgeting NMi 3
Contents
• Introduction – with intermezzo legal metrology in The
Netherlands and NMi VSL
• Maintenance & realization of NMS• Research & development of NMS• Key comparisons• Surveillance• Preparation of Legislation and
International Representation• Other Surveillance activities
Cz Brno, April 2005 Butgeting NMi 4
Introduction (1)• Twinning Light Project Strengthening of State
Executive in Czech Republic in the field of metrology
– Twinning focused on the • approach to the Non-Harmonized Part of Regulated
Area in the Field of Measuring Instruments in EU and on
• Presentation of the Experience and Practical Approach to the Regulation and Surveillance in the Field of Medical Devices with Measuring Function.
This presentation will focus on:
Netherlands example in budgeting for maintenance and development of National Measurement Standards and surveillance on MI’s in use.
Cz Brno, April 2005 Butgeting NMi 5
Calculation of budget for maintenance and development of national measurement standards and supervision on MI’s in use at NMi
• What components to take into account in the budgeting process– Maintenance and realization– Research and development– Key-comparisons– Inspections– Preparation of Laws and
representation
Introduction (2)
Cz Brno, April 2005 Butgeting NMi 6
Introduction (3), Dutch legal metrology
A short intermezzo about the organisation of legal metrology in The Netherlands
Cz Brno, April 2005 Butgeting NMi 7
Legal Metrology in the Netherlands (1)• Privatisation of the legal metrology service
(’89)– New Weights and Measures Act– Nederlands Meetinstituut b.v. (NMi)– Fully owned by Ministry of Economic Affairs– TNO shareholder of NMi since 2001, TNO is a
leading independent Dutch research organisation
– New Law On Metrology 2006 introducing a.o. MID (Scope now more than fair trade)
• NMi is one central organisation– Two different profiles (legal metrology)– NMi Certin and Verispect
Cz Brno, April 2005 Butgeting NMi 8
Legal metrology in the Netherlands (2)
N M i V S L b .v.Ja n R id d er
N M i C e rtin b .v.P ie te r va n B reu g e l
V e risp e ct b .v.C e e s va n M u llem
N M i b .v.Ja n R id d er
Cz Brno, April 2005 Butgeting NMi 9
NMi Certin b.v.• Access to the market
– Type approval– Initial verification– Re-verification after repair– Authorisation for verification (via
Verispect)– System-certification (companies)– Notified Body for NAWI Directive (CE)
• On a commercial basis, no contract with government
• Located in Dordrecht (75 employees)
Cz Brno, April 2005 Butgeting NMi 10
Verispect b.v.• Supervision in the market
– Random inspections– Consumer protection and fair trade– Free of charge of owner– Weights and Measures Act, Gaming
Act and Hallmarking Act– Organised in two departments with
40 inspectors located over the country
• All activities covered by contracts with government
• Main office located in Delft, 58 employees
Cz Brno, April 2005 Butgeting NMi 11
Law for Weights and Measures• Weighing instruments• Measuring instruments (length)• Measuring systems for Fluids• Gas meters• Electricity-meters• Weights• Taximeters
• Implementation of MID (Approved New Law on Metrology implements MID)
Cz Brno, April 2005 Butgeting NMi 12
Supervision in service• Random inspections, unexpected• Instrument conform type approval• Inspections at the user place• Frequency dependent on metrological
properties• Independent from type approval and initial
verification• Cost effective for owner• Owner/user responsible for instrument
Cz Brno, April 2005 Butgeting NMi 13
Supervision
• Result of the inspection:– Metrological properties in line
with requirements– Sealing are broken/no marks– No initial verification– Maintenance of instrument
• Depending on the failure, follow-up action:– Repair under the
responsibility of owner– Rejection, re-verification– The inspector comes back
after two months
Cz Brno, April 2005 Butgeting NMi 14
Co-operation• Inspectors during the supervision take into
account the findings of skilful persons or corporations, who in the practice of a profession or business maintain or verify measuring and weighing instruments
• Co-operation agreement with manufactures and maintenance companies– Quality system based on ISO 9001:2000– Analysis of the procedures and working
instructions– Technical audit of the personnel– Official agreement– Co-operation mark
Cz Brno, April 2005 Butgeting NMi 15
Why co-operation?• Responsibility of measurement
instrument partly from government to owner/user.
• Co-operation leads to an efficient supervision and where appropriate a cost-saver for the government.
• Advantage for the owner or user of the measuring instrument: less stagnation of the production-process.
• Co-operation with 68 companies in all the sectors of supervision.
Cz Brno, April 2005 Butgeting NMi 16
Summary Supervision
• Supervision system differs from country to country– Dependent on the culture in a
country– The role of government– Independent from type approval
• Dutch system incorporates more responsibility for the owner/user
• Co-operation leads to cost reduction for government and has benefits for owner of instrument.
Cz Brno, April 2005 Butgeting NMi 17
• Maintenance is up keeping:– the level of uncertainty of the NMS– the NMS in operation– the QS– the contacts within the metrology infrastructure
• Realization is:– improving the uncertainty of the NMS– adjusting NMS to new (international) requirements– introducing QS– substantial extension of NMS
• Development– introducing new standards and realization of new
methods
Introduction (4)
Cz Brno, April 2005 Butgeting NMi 18
Introduction (5)• Research
– Research on new standards and methods• Surveillance
– Surveillance on instruments in use in legal area
• Preparation of Law and International representation– Law preparation and participation in EU
groups– Representation in OIML, WELMEC etc
• Separate contracts for Hallmarking and Gaming
Cz Brno, April 2005 Butgeting NMi 19
Introduction (6)
Fundemental research
Research
Development
Maintenance of NMS
Calibration, comparisons, international recognition
Fu
nd
am
enta
l
metr
olo
gy
Scie
nti
fic m
etr
olo
gy
Indust
rial
metr
olo
gy
Num
ber
of
Av
og
ad
ro,
SE
T, W
att
CO
MB
, J
AW
S,
CR
DS
New
co
mp
on
ents
,
Ex
ten
sio
n
facil
itie
s
Cali
bra
tion
labo
rato
ries
Type of metrology
Examples Czech Republic
?
NA
NO
tech
mil
ogy
Cz Brno, April 2005 Butgeting NMi 20
• Royal Decisions– Units– National Measurement Standards– Appointment National Measurement Standards
Institute NMi VSL for all national measurement
standardsShort Introduction of NMi VSL
Short Introduction of NMi VSLNational measurement standards; The law
NMi B.V.
NMi Van Swinden
Laboratorium
NMi Certin
Verispect
Cz Brno, April 2005 Butgeting NMi 21
Responsibilities
• The Dutch government signed the Metre Convention in 1929
• Use of SI system is mandatory since 1979 (Directive 80/181/EEG)
• Dutch Metrology law determines:– Which units are recognised– That maintenance and development of national
standards is described in a separate directive (AMVB)
– That one institute will be designated as the national metrology institute
– Requirements for the national metrology institute
– Metrology Council
• Metrology law is just revised (2006)
Cz Brno, April 2005 Butgeting NMi 22
Standaardenbesluit 1989
• Pubished on 19 April 1989• National standards will be
maintained for mass, length, temperature, electrical voltage, electrical resistance
• Desciption on how standards must be maintained or realised
• NMi VSL B.V. was designated as the Dutch NMI on 24 April1989
Cz Brno, April 2005 Butgeting NMi 23
Standaardencontract
• Contract agreement between MEA and VSL was signed on 1 May 1989The contract is renewed each year
• NMi VSL is obligated by contract to:– Maintain and realise the standards mentioned in
the “Standaardenbesluit”– Maintain calibration facilities for these standards– Maintain and realise other standards and their
calibration facilities as described in “maintenance agreements” (our annual work plan)
– Make the uncertainty level of the national standards comparable to the international level
Cz Brno, April 2005 Butgeting NMi 24
Contracts of VSL with MEA
• SBO Contract (~ 35 man years)– Maintenance of (national) standards– Development of new standards– Metrology infrastructure– Investments
• Key comparisons (~ 3 man years)
• Research contract (~ 8 man years)
Cz Brno, April 2005 Butgeting NMi 25
Standards Contract 2004
Standards Contract 2004 (43010 hrs)
2%
22%
9%
23%3%
3%
11%
5%
9%
10%3%
AUV
Chemistry
Contact thermometry
Electricity
Time & Frequency
Ionising radiation
Length
Mass
Photometry & Radiometry
Flow
Infrastructure
Cz Brno, April 2005 Butgeting NMi 26
Maintenance & realization (1)
• Yearly offer to MoEA within the
framework of the contract consists of three parts:
– Work plan for the realization of the contract
– List of activities per NMS and for International participation (Meter convention, Euromet etc), including indication of hours and money
– Goals and resources
Cz Brno, April 2005 Butgeting NMi 27
• Contents of the work plan– Introduction– General– Activities
•Within the framework of the contract•Other activities
– Turnover calibrations– Offer maintenance 2003– Financial basis and calculation of costs
•Basis•Calculation•Built up of costs
– Long term planning 2004, 2005, 2006
Maintenance & realization (2)
Cz Brno, April 2005 Butgeting NMi 28
• Offer maintenance & realization 2003– Costs for man hours– Costs made for financing– Costs for subcontracting part of the
contract– Overhead costs– Investments in standards on basis of in
time dispersed depreciation– Office refurbishment costs on basis of in
time dispersed depreciation
Maintenance & realization (3)
Cz Brno, April 2005 Butgeting NMi 29
(Continuation former sheet)
– Other costs related to:• material use• other personnel costs• other costs of premises• rent for premises• usage of technical capital assets• sale costs• advise and verification• technical support
– Continuity surcharge
Maintenance & realization (4)
Cz Brno, April 2005 Butgeting NMi 30
Explanation ‘other costs’
• Material use; costs depending on production and directly related to turnover– Travel and hotel expenses
•contacts maintaining international traceability
• international cooperation at construction of NMS
•contacts for declarations of conformity– Related office costs, consumable goods
and technical resources
Maintenance & realization (5)
Cz Brno, April 2005 Butgeting NMi 31
• Other personnel costs– house-office traveling– knowledge update– employees council– canteen– passenger car lease, etc
• Other costs of premises; related to the buildings but excluding costs for rent– including gas, water, electricity,
insurance, safeguarding and house cleaning
Maintenance & realization (6)
Cz Brno, April 2005 Butgeting NMi 32
• Usage of technical capital assets; related to means of production– costs for office automation, maintenance
costs for office apparatus and inventory and lease costs for company cars
• Sale costs; related to promotion of metrology– yearly ‘clients-day’, world metrology day,
promotion of SI, metrology brochures etc• Advise and verification costs
– accountant, accreditation• Technical support
– costs related to workshop
Maintenance & realization (7)
Cz Brno, April 2005 Butgeting NMi 33
• R&D projects– project management, also with regard to
the calculation of budgets • Hours• Investments• Direct order costs
• Key-comparisons– Hours
Research & developmentKey-comparisons
Cz Brno, April 2005 Butgeting NMi 34
Surveillance (1)• Yearly offer to MoEA within the
framework of the contract consists of three parts:
– Work plan for the realization of the contract
– List of activities per focus area taking into account co-operation, including indication of hours and money
– Goals and resources
Cz Brno, April 2005 Butgeting NMi 35
Surveillance (2)
• Contents of the work plan– Introduction– General– Activities– Co-operation– Offer Surveillance 2003– Financial basis and calculation of costs
•Basis•Calculation•Built up of costs
– Long term planning 2004, 2005, 2006
Cz Brno, April 2005 Butgeting NMi 36
Surveillance (3)• Offer Surveillance 2003
– Costs for man hours– Costs made for financing– Costs for subcontracting part of the contract– Overhead costs– Investments in equipment on basis of in time
dispersed depreciation– Office refurbishment costs on basis of in time
dispersed depreciation– Other costs related to:
• material use• other personnel costs• other costs of premises• rent for premises• usage of technical capital assets• advise and verification
– Continuity surcharge
Cz Brno, April 2005 Butgeting NMi 37
Surveillance (4)Explanation ‘other costs’
• Material use; costs depending on production and directly related to turnover– Travel and hotel expenses– Related office costs, consumable
goods and technical resources
Cz Brno, April 2005 Butgeting NMi 38
Surveillance (5)• Other personnel costs
– house-office traveling– knowledge update– employees council– canteen– passenger car lease, etc
• Other costs of premises; related to the buildings but excluding costs for rent– including gas, water, electricity,
insurance, safeguarding and house cleaning
Cz Brno, April 2005 Butgeting NMi 39
Surveillance (6)• Usage of technical capital assets; related to
means of production– costs for office automation, maintenance
costs for office apparatus and inventory and lease costs for company cars
• Information costs; related to promotion of metrology– yearly ‘clients-day’, world metrology day,
promotion of SI, metrology brochures etc• Advise and verification costs
– accountant, accreditation• Technical support
– costs related to workshop
Cz Brno, April 2005 Butgeting NMi 40
Preparation Regulation & Representation• Yearly plan for legal support MoEA
– Participation in EU groups (now mainly focused on MID)
– Participation in WELMEC (Work groups)– Representation and participation in OIML
• Costing elements:•Hours•Investments•Direct order costs
Cz Brno, April 2005 Butgeting NMi 41
Other legal activities
• Contract for Surveillance Hallmarking with MoEA
• Contract for Surveillance Gaming with MoJ
– Same costing structure as for Metrological Surveillance