building process for wakeboard
TRANSCRIPT
![Page 1: Building Process For WakeBoard](https://reader036.vdocuments.net/reader036/viewer/2022062313/55caea25bb61eb6e5f8b475f/html5/thumbnails/1.jpg)
Documenting your build process
By MItchell Banks
![Page 2: Building Process For WakeBoard](https://reader036.vdocuments.net/reader036/viewer/2022062313/55caea25bb61eb6e5f8b475f/html5/thumbnails/2.jpg)
Step 1Creating The Mock-up
You need the mock-up to be 50.8 cm wide
And the leant needs to be 113
![Page 3: Building Process For WakeBoard](https://reader036.vdocuments.net/reader036/viewer/2022062313/55caea25bb61eb6e5f8b475f/html5/thumbnails/3.jpg)
Step 2
You will need a 3 cm lift from the centre of the board
![Page 4: Building Process For WakeBoard](https://reader036.vdocuments.net/reader036/viewer/2022062313/55caea25bb61eb6e5f8b475f/html5/thumbnails/4.jpg)
Step 3
Then you wont to start sanding it into a ovule shape but still keeping the 3 cm lift at the ends of the board.
![Page 5: Building Process For WakeBoard](https://reader036.vdocuments.net/reader036/viewer/2022062313/55caea25bb61eb6e5f8b475f/html5/thumbnails/5.jpg)
Step 4 Last StepAt last we need to put a clear
coat on it called lacquer this will prevent water
getting into the board and water
logging it.
By Mitchell Banks