butbro welding products - yewcheong.com.sg 1 - butbro welding product.pdf · designed for welding...
TRANSCRIPT
DISTRIBUTED BY:
Orbit D.H. Welding OutfitConsisting of:- ORBIT Shank & Mixer, Threaded D.H. Neck, D.H. Tips Sizes 1,2,3,5,7,10,13, 18,25, Hose Check Valves, Outfit Spanner, Data Card, Plastic Carrying Case
Order No. 1010181902
Orbit Combined Welding & Cutting OutfitConsisting of:- ORBIT Shank & Mixer & Cutting Attachment, L/W Nozzles Sizes 2,5,7,10,13, 18,25, 3/64” A-FN Type Cutting Nozzle, A-SFN Type Sheet Metal Cutting Nozzle, Nozzle Cleaning Outfit, Outfit Spanner, Data Card, Plastic Carrying Case
Order No. 1010181000
Orbit Complete Combined Welding & Cutting Outfit Consisting of:- ORBIT Shank & Mixer & Cutting Attachment, Single Stage, 1 Gauge Oxygen Regulator, Single Stage, 1 Gauge Acetylene Regulator, 5 Metres 3/16” Bore Twin Line Fitted Hose, L/W Nozzles Sizes 2,5,7,10,13, 3/64” A-FN Type Cutting Nozzle, A-SFN Type Sheet Metal Cutting Nozzle, Sunfire Spark lighter, Nozzle Cleaner Outfit, Outfit Spanner, Combination Spanner, Goggles, Data
Card, Plastic Carrying Case
Order No. 1010181777
Orbit LW W & C BlowpipeOrder No.1010481222 Welding Shank1010481444 Orbit Cutting Attachment1010481025 Orbit Welding Mixer1010481026 Orbit threaded D.H. Neck
HOSE CONNECTION - 1/4” BSP (Other threads available on request)WELDING CAPACITY - 8mmCUTTING CAPACITY - 20mmWELDING NOZZLES - Lightweight Swaged Nozzles Sizes 1-25 D.H Solid Copper Tips Sizes 1-25CUTTING NOZZLES - ORBIT A-FN Cutting Nozzles ORBIT A-SFN Sheet Metal Nozzles
1010181903
1010181902
1010181000
1010181777
Orbit L/W Welding OutfitConsisting of:- ORBIT Shank & Mixer, L/W Nozzles Sizes 1,2,3,5,7,10,13,25, Hose Check Valves Outfit, Spanner, Data Card, Plastic Carrying Case
Order No. 1010181903
“ORBIT” Lightweight Welding and Cutting BlowpipeA new superbly constructed welding & cutting blowpipe designed with safety in mind and engineered from highest quality materials to complement the operator in production or light gauge maintenance welding & cutting. The shank is common to both welding and cutting heads, the same quick, positive and leak-free means of attachment being used for both. The shank is manufactured from a solid drilled aluminium forging thus avoiding necessity of internal tubes and giving added safety.
WeldingThe shank can be used with either lightweight swaged nozzles or D.H. solid copper tips + brass neck according to the operators preference, enabling precise flame control and up to 8mm (5/16”) welding capacity in steel.
CuttingThe newly designed lightweight cutting attachment uses the nozzle mix principle and is thus highly resistant to backfire and flashback. Although of a lightweight design, it is engineered from solid brass casting and silver soldered tubes to provide and extremely robust construction. Using Orbit A-FN type nozzles and Acetylene fuel gas the orbit has a cutting capacity of over 20mm. BUTBRO torches and nozzles conform to BS EN ISO 5172
1.11
BUTBRO WELDING PRODUCTS
DISTRIBUTED BY:
SteelmasterWith forward mounted valves and cutting lever for additional safety and flat handle.Standard Models: Length 18” (460mm), 27“ (700mm), 36” (900mm) Head Angles 90o, 75o, 180o
Fuel Gas: Acetylene or Propane
Order No.1010287090 Steelmaster 18” 90o cutter1010287091 Steelmaster 18” 75o cutter1010287092 Steelmaster 18” 180o cutter1010288090 Universal 18” 90o cutter
Hose Connections - 3/8” (Other threads available on request)Cutting capacity - 300mm (12”)Nozzles - ANM (Acetylene) Cutting Nozzles PNM (Propane) Cutting Nozzles ASNM Sheet Metal Cutting Nozzles AGNM Gouging Nozzles ARCNM Rivet Cutting Nozzles PH5 Heating Nozzles
Cutting Torch AccessoriesDouble Roller Guide (Order No. 1011170510)Steady and guide your torch over large plates and forgings. Fits all nozzle- mix cutters usingANM/ PNM type nozzles. Fixed by clamping around nozzle thus accommodating either 75o or90o torch heads.
Spade Guide (Order No. 1011170511)For straight, accurate cutting of plates. Fixing is same as roller guide.
Large Circle Cutting Attachment (Order No. 1011170512)Cut accurate circles with this versatile attachment. A rotary head ensures free running eitherclockwise or anti-clockwise, together with a square radius bar which prevents twisting. It isadjustable to cut circles from 60mm (21/2”) up to 425mm (17”) Dia. Two models are available with either a male headnut (Butbro Steelmaster, Butbro MK 2/3 etc.) or a female headnut (MK3 equipment).
Small Circle Cutting Attachment (Order No. 1011170515)For cutting smaller diameter circles, clamps to tubes of cutter or cutting attachment. Three models are available to suit various tube configurations.
UniversalWith rear mounted valves and cutting lever and round handle.Standard Models: Length 18” (460mm), 27” (700mm), 36” (900mm) Head Angle 90o, 75o, 180o
Fuel Gas: Acetylene or Propane
1.12
BUTBRO WELDING PRODUCTS
DISTRIBUTED BY:
Butbro MK 3/A Combined Welding & Cutting OutfitCosisting of:- MK 3/A Shank, Mixer & Cutting Attachment Type 3 Swaged Welding Nozzles Sizes 2,5,7,10,13,18,25, 1/16” ANM Cutting Nozzle 3/64” ANM Cutting Nozzles, Nozzle Cleaner Outfit, Headnut Spanner, Data Card, Plastic Carrying Case
Order No. 1010177000
Order No.1010277222 MK 3/A Shank1010277333 MK 3/A Welding Mixer1010276444 MK 3/A Cutting Attachment1010377555 MK 3/A Super Heating Mixer1010368666 MK 3 Brass Heating Neck (10”)1010368777 MK 3 Brass Heating Neck (28”)1010378666 MK 3 Stainless Steel Neck (10”)1010378777 MK 3 Stainless Steel Neck (28”)1010378888 MK 3 Stainless Steel Neck (40”)
Hose Connections - 3/8” (Other threads available on request)Welding capacity - 25mmCutting capacity - 50mmWelding Nozzles - Type 2 & 3 Swaged Welding Nozzles Sizes 1-90 Cutting Nozzles - ANM (Acetylene) Cutting Nozzles PNM (Propane) Cutting Nozzles ASNM Sheet Metal Nozzles AGNM Gouging Nozzles ARCNM Rivet Cutting NozzlesHeating Nozzles - AHT (Acetylene) Heating Nozzles PHT (Propane) Heating NozzlesSuper Heating - Super Heating NozzlesNozzles (Propane) Sizes 1H-5H
Butbro MK 3/A Combined Welding & Cutting OutfitConsisting of:- MK 3/A Shank, Mixer & Cutting Attachment, Single Stage, 2 gauge Oxygen Regulator, Single Stage, 2 Gauge Acetylene Regulator, 5 Metres 1/4” Bore Twin Line Fitted Hose, Type 3 Swaged Welding Nozzles Sizes 2,5,7,13, 1/16” ANM Cutting Nozzle, Sunfire Spark lighter, Nozzle Cleaner Outfit, Combination Spanner, Spindle Key, Headnut Spanner, Goggles, Data Card, Plastic Carrying Case
Order No. 1010177777
MK 3/A Combined Welding & Cutting Torch
MK 3/A Combined Welding and Cutting TorchThe BUTBRO MK 3/A is a high pressure, sturdily constructed and well balanced welding and cutting torch. Each component (shank, mixer, cutting attachment) is inter-changeable with other leading makes of type 3 equipment. It has front mounted colour coded control valves, employing stainless valve spindles fitted with both ‘O’ ring and nylon seals; providing fine adjustment and leak- free conditions, using extremely moderate gas pressures.The shanks is common to both welding and cutting heads, the same quick positive positioning and leak-free means of attachment being used for both. BUTBRO torches and nozzles conform to BS EN ISO 5172.
Welding and HeatingDesigned for welding work from 18 swg to cover 1” thickness using type 3 swaged nozzles sizes 1-90 liters. The mixer seats on serrated toothed faces allowing the operator a selection of positive nozzle positioning through 360º. Also can be used for heating, with either acetylene or propane heating nozzles, together with a heating neck.
CuttingThe cutting head is nozzle mixing, enabling the operator to use either acetylene or propane fuel gases by fitting the appropriate nozzle. A range of ANM and PNM nozzles are available for clean efficient cutting of material thickness from sheet metal to 50mm (2”) using both acetylene, and propane fuel. Its versatility also allows gouging, flame cleaning etc., to be supplied to customer’s requirements.
Propane Super HeatingUsing a propane super heating mixer and 10” or 28” stainless steel super heating neck and intense heat output of up to 600,000 Btu/H is obtained. Ideal for heating castings and similar large articles.
1.13
BUTBRO WELDING PRODUCTS
DISTRIBUTED BY:
Welding, Cutting & Heating DataWelding - Butbro Orbit & MK 3/A Torches Cutting - Acetylene - Butbro Ortbit Torch
mm
0.9
1.2
2
2.6
3.2
4
5
6.5
8.2
10
13
25
Mild Steel Thickness
in
1/8
5/32
3/16
1/4
5/16
3/8
1/2
1+
swg
20
18
14
12
10
8
6
3
0
4/0
7/0
Nozzle
size
1
2
3
5
7
10
13
18
25
35
45
90
Operating pressureAcetylene Oxygen
bar
0.14
0.14
0.14
0.14
0.14
0.21
0.28
0.28
0.42
0.63
0.35
0.63
PSI
2
2
2
2
2
3
4
4
6
9
5
9
bar
0.14
0.14
0.14
0.14
0.14
0.21
0.28
0.28
0.42
0.63
0.35
0.63
PSI
2
2
2
2
2
3
4
4
6
9
5
9
Gas consumptionAcetylene Oxygen
l/h
28
57
86
140
200
280
370
520
710
1000
1300
2500
ft³/h
1
1
3
5
7
10
13
18
25
35
45
90
l/h
28
57
86
140
200
280
370
520
710
1000
1300
2500
ft³/h
1
2
3
5
7
10
13
18
25
35
45
90
MaterialThickness
mm
3
6
20
25
50
in
1/8
1/4
3/4
1
2
Nozzle
size
S/M
1/32
3/64
1/16
1/16
Operating pressure Oxygen Acetylene
bar
2.1
2.1
2.1
3.8
5.3
PSI
30
30
30
55
75
bar
0.3
0.15
0.15
0.15
0.20
PSI
4
2
2
2
3
Gas consumptionCutting Heating AcetyleneOxygen Oxygenl/h
650
710
1415
3400
4530
ft³/h
30
25
50
120
60
l/h
120
255
255
255
310
ft³/h
4.5
9
9
9
11
l/h
220
255
225
225
285
ft³/h
8
8
8
8
10
ApproxCuttingSpeeds
mm.m
110
255
225
225
285
in.m
4
8
8
8
10
Cutting - Acetylene - ButbroMK 3/A & 18/90 Cutters (ANM Nozzles)
Flame Cleaning- Butbro MK 3/A TorchesAcetylene fuel
gas NozzleFuel gaspressure
Oxygenpressure
Fuel Gasconsumption
Oxygenconsumption
Type
50mm flat100mm flat150mm flat
bar
0.490.70.85
PSI
71012
bar
0.570.70.85
PSI
81012
l/h
105020002700
ft³/h
377094
l/h
120022003000
ft³/h
4178104
MaterialThickness
mm
Sheet
6
13
25
50
75
100
150
200
250
300
in
1/4
1/2
1
2
3
4
6
8
10
12
Nozzle
size
Asnm
1/32
3/64
1/16
1/16
1/16
5/64
3/32
1/8
1/8
1/8
Operating pressure Oxygen Acetylene
bar
1.5
1.8
2.1
2.8
3.2/3.5
3.5/4.2
3.2/4.8
3.2/5.5
4.2
5.3
6.3
PSI
20
25
30
40
45/50
50/60
45/70
45/80
60
75
90
bar
0.14
0.14
0.21
0.14
0.14
0.14
0.14
0.21
0.28
0.28
0.28
PSI
2
2
3
2
2
2
2
3
4
4
4
Gas consumptionCutting Heating AcetyleneOxygen Oxygen
l/h
800
800
1900
4000
4500
4800
6800
9400
14800
21500
25000
ft³/h
28
28
67
140
160
170
240
330
510
760
880
l/h
85
480
570
540
620
680
850
960
1380
1560
1560
ft³/h
3
15
20
19
22
24
30
34
48
55
55
l/h
85
400
510
470
560
620
790
850
1250
1420
1420
ft³/h
3
14
18
17
19
22
27
30
44
50
50
ApproxCuttingSpeeds
mm/m
-
510
480
400
300
205
150
125
100
75
50
in/m
-
20
19
16
12
8
6
5
4
3
2Super Heating - Propane - ButbroMK 3/A & Super Heating TorchesThe flame size and heat output of these nozzles varies considerable with the pressure settings used. Two typicalalternatives are given for each size of nozzle.
Propane cons
bar
0.72.11.12.51.85.02.55.73.58.7
PSI
103015352570358050125
bar
35073004800870083001650010600188001270028000
PSI
121255168304290575370650444964
l/h
830190012002100210041002700480032007000
ft³/h
296541757514494162112246
W
244800554200348800639200622200122740080240013804009554002101200
Btu/h
72000163000102000188000183000361000236000406000281000681000
Propane pres
bar
0.140.490.210.460.281.10.351.30.852.1
PSI
27384155181230
Oxygen pres
Oxygen cons
Heat output (app.)
Nozzle
Type
1H
2H
3H
4H
5H
Gouging - ButbroMK 3/A & 18/90 Cutters (AGNM Nozzles)
MaterialThickness
mm
8
11
12
in
5/16
7/16
1/2
Nozzle
size
13
19
25
Operating pressure Oxygen Acetylene
bar
4.0
5.0
5.5
PSI
60
75
85
bar
0.5
0.5
0.55
PSI
7
7
8
Gas consumptionCutting Heating AcetyleneOxygen Oxygen
l/h
3680
9340
16270
ft³/h
130
330
575
l/h
990
1870
2290
ft³/h
35
66
81
l/h
905
1700
2100
ft³/h
32
60
74
ApproxCuttingSpeeds
mm/m
610
1970
1220
in/m
24
42
48
Cutting - Propane - ButbroMK 3/A & 18/90 Cutters (PNM Nozzles)
Heating - Acetylene - ButbroMK 3/A Torch (AHT Nozzles)
MaterialThickness
mm
6
13
25
50
75
100
150
250
300
in
1/4
1/2
1
2
3
4
6
10
12
Nozzle
size
1/32
3/64
1/16
1/16
1/16
5/64
3/32
1/8
1/8
Operating pressure Oxygen Acetylene
bar
2.1
2.1
2.8
3.2
3.5
3.5
4.2
5.6
6.7
PSI
30
30
40
45
50
50
60
80
95
bar
0.2
0.2
0.2
0.3
0.3
0.3
0.4
0.6
0.8
PSI
3
3
3
4
4
4
6
8
8
Oxygen Oxygenl/h
1000
1800
3000
4500
4800
7300
12300
22300
26300
ft³/h
36
65
140
160
170
260
435
790
930
l/h
1300
1600
1700
1800
2000
2600
3300
4600
5900
ft³/h
48
57
62
66
73
93
120
165
210
l/h
300
300
400
400
500
600
800
1100
1400
ft³/h
12
14
15
16
18
23
30
42
50
ApproxCuttingSpeeds
mm/m
430
360
280
205
205
152
125
50
50
in/m
17
14
11
8
8
6
5
2
2
Fuel gas cons
bar
0.350.430.85
PSI
4612
l/h
10020003600
ft³/h
4070125
l/h
110018003200
ft³/h
3663115
W
176800309400472600
Btu/h
5700091000139000
Acetylene gas presbar
0.350.430.63
PSI
469
Oxygen pres
Oxygen cons
Heat output (app.)
Nozzle
Type
A-HT25A-HT50A-HT100
bar
0.641.7
PSI
924
l/h
34007020
ft³/h
120248
l/h
8501750
ft³/h
3062
W
232600527000
Btu/h
75000155000
Propane pres
bar
0.210.7
PSI
310
Oxygen pres
Oxygen cons
Heat output (app.)
Nozzle
Type
P-HT30P-HT60
Heating - Propane - ButbroMK 3/A Torch (PHT Nozzles)
Fuel gas cons 1. Data is for guidance only and may vary with operating conditions,
materials, etc.
2. Gas pressure are shown in BAR-1 bar= 1kg cm² 1 PSI= 0.069 bar.
3. Gas consumption in LITRES PER HOUR (l/h).
Gas consumptionCutting Heating Acetylene
1.14
BUTBRO WELDING PRODUCTS
DISTRIBUTED BY:
MK 3/A Combined WeldingAnd Cutting Torch
78777
78991
78992
78993
78994
78995
78666
Super Heating (Propane)
70513
70515
AGNM15013-15025
PNM18132-18116
ANM10132-10116
77444
Cutting
AHT48425-48410
68777
68666
Welding
68555-90
68518-45
68507-13
Heating
77222
77555
68501-5
1.15
BUTBRO WELDING PRODUCTS
77333 or 78333for size 45-90
DISTRIBUTED BY:
Cutting NozzlesFor use with Butbro and all other leading makes of nozzle- mix equipment
ANME- Long Pattern6 Heating Holes- Long Pattern 88mm Long. Use Acetylene Fuel Gas
Order No. Range Size1010245132 3-6mm 1/32”1010245364 5-12mm 3/64” 1010245116 10-75mm 1/16” 1010245564 70-100mm 5/64”1010245332 90-150mm 3/32”1010245764 140-200mm 7/64”1010245018 190-300mm 1/8”
PNME- Long Pattern9 Spline or 18 Spline Inner - Long Pattern 88mm Long. Use Propane Fuel Gas
Order No. Range Size1010246132 3-6mm 1/32”1010246364 5-12mm 3/64” 1010246116 10-75mm 1/16” 1010246564 70-100mm 5/64”1010246332 90-150mm 3/32”1010246764 140-200mm 7/64”1010246018 190-300mm 1/8”
AGNM Gouging Nozzles94mm Long. Use Acetylene Fuel Gas
Order No. Range Size1010215013 6-8mm Width x 3-9mm Depth 13 - 1/32”1010215019 8-11mm Width x 6-11mm Depth 19 - 3/64”1010215025 9-12mm Width x 9-12mm Depth 25 - 1/16”
ASNM Sheet Metal Nozzles88mm Long. Use Acetylene Fuel Gas
Order No. Range Size1010214000 0-3 mm Sheet Metal 0.3
AFN Type (Orbit) NozzlesUse Acetylene Fuel Gas
Order No. Range Size1010213000 0-3 mm Sheet Metal ASFN1010213132 3-6 mm 1/32” 1010213364 6-20 mm 3/64”1010213116 20-30 mm 1/16”
88mm
88mm
88mm
88mm
94mm
1.16
BUTBRO WELDING PRODUCTS
Welding and Heating Nozzles
Lightweight Swaged Copper Tube NozzlesFor use on Butbro Orbit torch 1/4” x 26 TPI thread.
D. H. Type Solid Copper TipsFor use on Butbro Orbit torch 5/16” x 25 TPI thread. Use in conjuction with DH neck 62017.
Type 2/3/4/5 Swaged Cooper Tube NozzlesFor use on Butbro Type 2/3/4/5 Welding Torch7/16” x 27 TPI Thread (Sizes 1-90 Butbro Type 2 & 3)31/64” x 27 TPI Thread (Sizes 45-90 using Heavy Duty Mixer)
Butbro Super Heating NozzlesFor use on type 3/4/5 blowpipe in conjunction with heavy duty mixer 77555 and necks 78666or 78777. Can also be used with NM 250/ Steelmaster in conjunction with super heating adaptor 0768929 use propane fuel gas.
Butbro AHT/PHT Heating NozzlesFor use on Butbro Type 2 and 3 and torches with brass heating neck.Use Acetylene Fuel Gas with AHT type nozzles. Use Propane Fuel Gas with PHT type nozzles.
Butbro PH5/PH6 Heating NozzlesFor use on Butbro Steelmaster and Universal and other NM cutters (PH5) MS cutter (PH6).Use Propane Fuel Gas
Order No. Range Size1010462401 to 1.0mm 11010462402 1.0mm - 1.5mm 2 1010462403 1.5mm - 2.0mm 31010462405 2.0mm - 2.5mm 51010462407 2.5mm - 3.0mm 7
Order No. Range Size1010462410 3.0mm - 4.0mm 101010462413 4.0mm - 5.0mm 131010462418 5.0mm - 6.0mm 181010462425 6.0mm - 8.0mm 25
Order No. Range Size1010462301 to 1.0mm 11010462302 1.0mm - 1.5mm 2 1010462303 1.5mm - 2.0mm 31010462305 2.0mm - 2.5mm 51010462307 2.5mm - 3.0mm 7
Order No. Range Size1010462310 3.0mm - 4.0mm 101010462313 4.0mm - 5.0mm 131010462318 5.0mm - 6.0mm 181010462325 6.0mm - 8.0mm 25
Order No. Range Size1010468501 to 1.0mm 11010468502 1.0mm - 1.5mm 2 1010468503 1.5mm - 2.0mm 31010466505 2.0mm - 2.5mm 51010468507 2.5mm - 3.0mm 71010468510 3.0mm - 4.0mm 101010468513 4.0mm - 5.0mm 13
Order No. Range Size1010468518 5.0mm - 6.0mm 181010468525 6.0mm - 8.0mm 251010468535 8.0mm - 10.0mm 351010466545 10.0mm - 13.0mm 451010468555 13.0mm - 19.0mm 551010468570 19.0mm - 25.0mm 701010468590 over 25.0mm 90
Order No. Size1010378991 72000 - 163,000 Btu/h 1H1010378992 102,000 - 188,000 Btu/h 2H1010378993 183,000 - 361,000 Btu/h 3H
Order No. Size1010378994 236,000 - 406,000 Btu/h 4H1010378995 250,000 - 618,000 Btu/h 5H1010378996 Nozzle Adaptor for NM Cutters
Order No. Size1010348425 HEATING TIP AHT251010348450 HEATING TIP AHT501010348410 HEATING TIP AHT100
Order No. Size1010368430 HEATING TIP PHT301010368460 HEATING TIP PHT60
Order No. Size1010370305 HEATING Nozzle PH51010370306 HEATING Nozzle PH6
Order No. 1010370307 Spare Insert for PH5/61010370306 Spare Headnut for PH5/6
DISTRIBUTED BY:1.17
BUTBRO WELDING PRODUCTS
DISTRIBUTED BY:1.18
Regulators - Side Entry
* for CO2 regulators use heaters above 30l/m.
CO2 Gas HeatersFitted between the cylinder and the regulator, preventing freezing inside the regulator.
Order No.1010550830 Butbro CO2 Heater 110 Volt1010550831 Butbro CO2 Heater 240 Volt
101076258410107625831010762590
Single-stage RegulatorsBUTBRO single stage regulators are precision built to latest BS EN ISO 2503 standards to providemaximum accuracy and safety.
Encapsulated control valves, 63mm pattern pressure gauges, captive pressure adjusting screw,permanently engraved identification on body to maintain ID even if labels are removed.Models available: 2 gauge, Gaugeless, 1 gauge, . Flo-Gauge. Pre-set.
Regulators are available for most common gases in either side or bottom entry with inlet threadssuitable for any local cylinder connection standards. Regulators are also available with NEVOCtype fittings.
1010783653101078365510107836541010783643101078364210107836481010783649
OxygenOxygenOxygen
AcetyleneAcetylene
ArgonCO2*
54215414141920
2222212
(bar)Inlet Outlet
410101.51.544
(form)
G 5/8” (BS3)G 5/8” (BS3)
CGA 540G 5/8 LH (BS4)
CGA 300G 5/8” (BS3)
0.860x14TPI (BS8)
G 3/8”G 3/8”
9/16”x 18G 3/8 LH
9/16”x 18 LHG 3/8”G 3/8”
Regulators - Bottom Entry
101078365110107836501010783652101078364110107836401010783656101078364410107836451010783647
OxygenOxygenOxygen
AcetyleneAcetylenePropaneArgonArgonArgon
54215414141519
15 LPM15 LPM
022020222
300300300252525300300300
104101.51.544
0 ~15 LPM0 ~15 LPM
G 5/8” (BS3)G 5/8” (BS3)G 5/8” (BS3)
G 5/8 LH (BS4)G 5/8 LH (BS4)G 5/8 LH (BS4)
G 5/8” (BS3)G 5/8” (BS3)G 5/8” (BS3)
G 3/8”G 3/8”G 3/8”
G 3/8 LHG 3/8 LHG 3/8 LH
G 3/8”G 3/8”G 3/8”
Referigeration RegulatorThis range of regulators is specifically designed to meet the needs of heating, ventilation and air conditioning (HVAC) trades, for pirge and leak test applications. Available in three pressure variants, the regulators are supplied with JIC fitting outlets.
Order No.
RS 400RS 600RS 750
Type.
300300300
Inlet
284152
Outlet Inlet(bar) (form)
Outlet
G 5/8”G 5/8”G 5/8”
W 11 x 1,25W 11 x 1,25W 11 x 1,25
Order No. Gas Gauges
3003003002525300200
Inlet Outlet Flowm3/h
(bar)Inlet Outlet
(form)
1010783655
1010783643
1010783656
1010783651
Gas Gauges Inlet Outlet Flowm3/h
BUTBRO WELDING PRODUCTS
DISTRIBUTED BY:
Regulators - Bottom Entry
Regulators - Side Entry
Order No.
101076214410107621451010762143101076218110107621461010762147101076214810107621491010762152
OxygenOxygen
AcetyleneInertInertInert
HydrogenHydrogen
Nitrous oxide2
222222222
30030025300300300300300200
4101.5241041010
G 5/8”G 5/8”
G 5/8” LHG 5/8”G 5/8”G 5/8”
G 5/8” LHG 5/8”LH
BS13
G 3/8”G 3/8”
G 3/8“ LHG 3/8”G 3/8”G 3/8”
G 3/8” LHG 3/8” LH
G 3/8”
2048101220488019135
For CO2 regulators use heaters above 40 Vmin
Line Regulators LinemasterMaximum inlet pressure 30 bar. Inlet 1/4” NPT male, outlet G3/8 RH or LH male cone. For anew installation both a Linemaster regulator and Linemaster Outlet Point are required.
Gas
Acetylene
Flammable (LH)
Flammable (LH)
Flammable (LH)
Inert
Inert
Inert
Order No.
1010781708
1010781707
1010781704
1010781697
1010781706
1010781703
1010781699
Outlet Pressure
1.5 bar
2.0 bar
4.0 bar
12.5 bar
2.0 bar
4.0 bar
12.5 bar
1.19
Multi-stage regulators for cylinder and manifold mounting GCE multi-stage regulator are designed to provide accurate, fluctuation free delivery for precision applications such as machine cutting or laboratory use. The first stage reduces the inlet pressure by over 90% and the large second stage diaphragm ensures accurate delivery. GCE multistage regulators are precision built to latest BS EN ISO 2503 and BS EN 7291 standards to provide maximum accuracy and safety.
These regulators have the additional feature of being able to pipe away gases from the relief valve port, and comply with the stringent requirements of BS EN 7291.
Features: Forged brass body. Safety Valve. 50mm dia dual scale safety pressure gauges. Captive pressure adjusting screw. Regulators are available for most common gases in either side or bottom entry with inlet threads suitable for any local cylinder connection standards. Regulators are also available with NEVOC type fittings.
Gas Gauges(bar)
Inlet Outlet(form)
Inlet Outlet Flow(m³/h)
Order No.
10107621981010762199101076219610107621821010762197101076215310107621501010762151
OxygenOxygen
AcetyleneInertCO2CO2
HeliumHelium
22222222
30030025300200200300200
4101.52410410
G 5/8”G 5/8”
G 5/8” LHG 5/8”
0,860 x 14 TPI0,860 x 14 TPI
G 5/8”G 5/8”
G 3/8”G 3/8”
G 3/8“ LHG 3/8”G 3/8”G 3/8”G 3/8”G 3/8”
20481012164019135
Gas Gauges(bar)
Inlet Outlet(form)
Inlet Outlet Flow(m³/h)
1010762151
1010762153
1010762143
1010762144
BUTBRO WELDING PRODUCTS
DISTRIBUTED BY:
“S” series “S” series - heavy duty single regulators of brass construction with stainless steel diaphragms.Typical applications are system charging and testing. Range 28-170 bar delivery pressure.
Type Gas Entry Inlet Flow (m³/h)
“M600” series “M600” series - improved delivery pressure control is achieved from two stage regulation. Typical applications are those left unattended for periods of time such as cable pressurisation,chemical and laboratory. Range up to 41 bar delivery pressure.
“OR14” series “OR14” series - offering some of the highest flows in the Butbro range through the use of a special monel tied valve, these are intended for cylinder and pipeline applications. The G5/8inlet adaptor can be removed to reveal a 1” BSP flat seat female fitting. Range up to 14 bardelivery pressure.
Type
HR 14OR 14
Gas
HydrogenOxygen
Entry
rearrear
Inlet pressure
230 bar230 bar
Outlet pressure
14 bar14 bar
Flow
450 m3/h120 m3/h
“S150 0L2” series “S1500L2” series - this pipeline regulator is ideal for tank systems, rear entry to suit panel or linemounting. The largest outlet configuration is necessary to give high flow from a relatively lowinlet pressure source. Max inlet 24 bar and delivery up to 10 bar.
Type
S 150 OL2
Gas
Oxygen
Entry
rear
Inlet pressure
24 bar
Outlet pressure
10 bar
Flow
240 m3/h
Order No`
Order No
10107835951010783594
Order No
1010783596
Outlet
1.20
10107628641010762865101076286610107628671010762811
S 400S 1500S 2500S 1500S 2500
InertInertInertOxygenOxygen
bottombottombottombottombottom
300 bar300 bar300 bar230 bar230 bar
28 bar100 bar170 bar100 bar170 bar
36120150115140
Type Gas Entry Inlet Flow (m³/h)Order No` Outlet
10107623981010762397101076239610107623771010762399
M 600M 600M 600M 600M 600
CO2FlammableInertInertOxygen
sidebottombottomsidebottom
200 bar300 bar300 bar300 bar230 bar
41 bar41 bar41 bar41 bar41 bar
80108108108100
BUTBRO WELDING PRODUCTS
DISTRIBUTED BY:
Flow Meters A precision flow meter in brass finish providing extremely accurate flow setting. Available in 2models : 0- 15 Liters/Min and 0-30 Liters/Min.
Gas Economizer Considerable savings in gas costs can be achieved by the use of a gas economizer in productionwelding and brazing. The torch is held on the hooked arm when not in use which shuts off gas supply to the torch. When unhooked the torch can be immediately re- ignited from the pilot lightwithout having to re-adjust the valves. 3/8” BSP Connections.
Order No.
1011151301
Order No.
10106916101010691600
Gauges
0 - 15 LPM0 - 30 LPM
Spark lighters
SUNFIRE TYPE with cup to collect gases, ideal for site use, screw on flints.
TRIPLE TYPE cup to collect gases, clip-on triple flint replacement.
PISTOL TYPE with reliable action, sliver finish, single replacement flint.
Order No.
1011154201101115422110111542111011154901
Description
Gas Economizer
Description
Sunfire Spark LighterTriple Flint Spark LighterPistol Spark LighterSpare Flints for Sunfire Spark Lighter
Order No.
1011154902
1011154222
Description
Spare Flints for PistolSpark LighterTriple Flint Renewals
Spanners and Keys COMBINATION SPANNERS for 5/8” BSP nuts and 3/8” BSP nuts with combined cylinder key.
SPINDLE KEY for oxygen and acetylene cylinders, hardened, drop forged.
ORBIT OUTFIT HEADNUT SPANNER for headnut of Steelmaster, BUTBRO Type 3 and mostother NM torches.
Order No.
1071154100
1011154101
1011154102
1011154105
1011154106
Description
2 x 3 ways Combination Spanner
Outfit Head Nut Spanner
Cylinder Spindle Key
10 Way Combination Spanner
4 Way Combination Spanner
54102
54100
54101
5410554106
Safety Curtains / Welding Screens
A portable free standing screen enabling the welding area to be enclosed thus protecting thesurrounding workspace from the effects of glare and spatter. Constructed from green translucentPVC. This material complies with EN 1598 and is both UV stabilized and self extinguishing.Overall size - 6’ x 6’ (Curtain: 5’9” x 5’3”)
Order No.
1019955440
Description
Portable welding screen
Size
6’ x 6’
Colour
Green
1.21
BUTBRO WELDING PRODUCTS
DISTRIBUTED BY:
Superguard FR50 Reset Flashback Arrestors
A regulator mounted safety device suitable for all welding and cutting operations, fully complyingwith EN730, this “lift to reset” unit incorporates the following features:• FA Sintered flame arresting element• NV Non return valve to prevent reverse flow of gases• PV Pressure trip device, activated by pressure wave accompanying a flashback• TV Thermal trip device, activated by heat to permanently cut off the gas supply• SI Status indicator shows green when unit is ready for use. In the event of a flashback the item can be reset by lifting and releasing the bonnet.
Order No.1011050950101105095110110509531011050954
GasOxygenFuel gasOxygenFuel Gas
Slimguard 99 Flashback Arrestors
The new Slimguard 99 for regulator mounting has been redesigned incorporating an improvedsintered filter and thermal trip device. Complies with EN730• FA Sintered flame arresting element• NV Non return valve to prevent reverse flow of gases• TV Thermal trip device, activated by heat to permanently cut off the gas supply
FR63 High Flow Pipeline Flashback Arrestors
Designed for use with acetylene manifolds up to 1.5 bar, this line mounted arrestor is fitted withBSP11/2” inlet and outlet and 48mm pipe stubs.Flow Rate 50 M3/H maximum. The unit incorporates the following features:• FA SINTERED FLASH ARRESTOR element to quench a flashback.
Order No.
1011062452Gas
Acetylene
Flameguard Torch Flashback Arrestors
A lightweight torch flashback arrestor specially designed for torch fitting. It incorporates an aluminum body and is manufactured to our own unique design without using soldered or bonded joints. The unit incorporates the following features:-1) Sintered Flash Arrestor element to quench a flashback.2) Non-Return Valve to prevent reverse flow of gases.3) Filter gauze to prevent foreign matter entering unit.
Order No.R.H.
10110509611011050963101105097510110509761011050969
L.H.
10110509621011050964101105097610110509681011050969
Working pressure0 - 10.0 bar1.5 - 5.0 bar0 - 10.0 bar1.5 - 5.0 bar
Inlet connectionG 3/8”G 3/8 LHG 9/16” RHG 9/16 LH
Outlet connectionG 3/8”G 3/8 LHG 9/16” RHG 9/16 LH
Order No.1011050920101105092110110509221011050923
GasOxygenFuel gasOxygenFuel Gas
Working pressure0 - 10.0 bar1.5 - 5.0 bar0 - 10.0 bar1.5 - 5.0 bar
Inlet connectionG 3/8”G 3/8 LHG 9/16” RHG 9/16 LH
Outlet connectionG 3/8”G 3/8 LHG 9/16” RHG 9/16 LH
3/8” BSP RH or LH for 10mm Hose3/8” BSP RH or LH for 8mm Hose 3/8” BSP RH or LH for 6mm Hose1/4” BSP RH or LH for 6mm Hose1/4” BSP RH or LH for 5mm Hose
Description
1.22
BUTBRO WELDING PRODUCTS
DISTRIBUTED BY:
Hose Check Valves (Patent No. 2076123) Hose check valves prevent the reverse flow of gases beyond the torch inlets. Butbro hose checkvalves are manufactured to our own approved design and the unique methodof assembly eliminates the use of soldered or bonded joints. They are suitable to use with Oxygen, Acetylene, Propane or natural gas and operate effectively on either nozzle-mix or injector type torches or regulator.
Order No.R.H.
1011071101101107111110110711211011071131
L.H.
1011071102101107111210110711221011071132
Butbro Hose Check Valve 3/8” BSP RH or LH Nut for 10mm HoseButbro Hose Check Valve 3/8” BSP RH or LH Nut for 8mm Hose Butbro Hose Check Valve 3/8” BSP RH or LH Nut for 6mm HoseButbro Hose Check Valve 1/4” BSP RH or LH Nut for 6mm Hose
‘O’ Clips
A quick permanent method for fastening hose connections. Zinc plated mild steel, other sizes available up to 23/4” Diameter.Use size 9/16” for 3/16”-1/4” bore hose.Use size 5/8” for 5/16” - 3/8” bore hose.Use size 3/4” for 3/8” bore ply hose.
‘O’ Clip PincersQuality forged steel pincers specially designed for fixing ‘O’ clips.
Order No.
101221111310122113151012211518101221172010122120231012211098
1/2” ‘O’ Clip9/16” ‘O’ Clip5/8” ‘O’ Clip3/4” ‘O’ Clip7/8” ‘O’ Clip‘O’ Clip Pincers for fixing above clips
(11 to 13mm Dia:) For 5mm Bore Hose(13 to 15mm Dia:) For 6mm Bore Hose(15 to 18mm Dia:) For 8mm Bore Hose(17 to 20mm Dia:) For 10mm Bore Hose(20 to 23mm Dia:) For 10mm 4 Ply Bore Hose
Description
Description
1.23
BUTBRO WELDING PRODUCTS
DISTRIBUTED BY:
Manifolds - couplers, adaptors and fittings
Order No.
10111006311011100633101110061110111005911011100860
1011100531
1011100341101110060110111002531011100547101110040010111003201011100278
Type - RH
Adaptor - 90º cylinder adaptorAdaptor - straight cylinder adaptorAdaptor - 3 branch adaptorAdaptor - 2 branch adaptorAdaptor - G 1/4” MALE x G 3/8 loose nutAdaptor - soldering 3/8 loose nutfor 15mmAdaptor 1/4NPTM x G3/8MBlanking plugCoupler - 1/4NPT Equal coupler RHLine valve 1/4 turn butterfly operatedLine valve 1/4 turn butterfly operatedLine valve 1/4 turn lever operatedShut off valve- handwheel
Rating(Bar)
23023023023030
30
3023030303030300
InletConnection
G 5/8” MG 5/8” MG 5/8” MG 5/8” MG 1/4” M RH
3/8”
1/4NPTMG 5/8” M1/4” NPT MG 3/8” M1/4” NPT FG 3/8” MW21.8 x 1/14RH
OutletConnection
G 5/8”FG 5/8”FG 5/8”FG 5/8”FG 3/8”F
15 mm tube
G3/8M-1/4” NPT MG 3/8”M1/4 NPT FG 3/8”MW21.8 x 1/14LH
Order No.
10111006321011100634101110061210111005921011100861
10111003421011100532
101110060210111005461011100321
Type - LH
Adaptor - 90º cylinder adaptorAdaptor - straight cylinder adaptorAdaptor - 3 branch adaptorAdaptor - 2 branch adaptorAdaptor - G 1/4” MALE x G 3/8 LH loose nutAdaptor 1/4NPTM x G3/8M LHAdaptor - soldering 3/8 loose nutfor 15mmBlanking plugLine valve 1/4 turn butterfly operatedLine valve 1/4 turn lever operated
Rating(Bar)
23023023023030
3030
2303030
InletConnection
G5/8”M LHG5/8”M LHG5/8”M LHG5/8”M LHG1/4”M RH
1/4NPT M3/8” LH
G5/8”M LHG3/8”M LHG3/8”M LH
OutletConnection
G 5/8”F LHG 5/8”F LHG 5/8”F LHG 5/8”F LHG 3/8”F LH
G 3/8”M LH15 mm tube
-G 3/8”M LHG 3/8”M LH
Pipeline adaptors
Order No.
1011100860101110034110111008611011100342
Description
1/4” NPT x 3/8” H/D loose nut RH1/4” NPT x 3/8” RH1/4 NPT x 3/8 H/D loose nut LH1/4” NPT x 3/8 LH
1.24
BUTBRO WELDING PRODUCTS
DISTRIBUTED BY:
Fine Adjustment Valves
Order No.1011100371101110037210111003831011100394
GasOxygenAcetyleneOxygenAcetylene
Inlet ConnectionG 3/8” RH MALEG 3/8” LH MALE1/4” NPT MALE1/4” NPT MALE
Outlet ConnectionG 3/8” RH MALEG 3/8” LH MALEG 3/8” RH MALEG 3/8” LH MALE
Fine Adjustment Valves with Swivel Nut
Order No.10111003931011100394
GasOxygenAcetylene
Swivel NutG 3/8” RH MALEG 3/8” LH MALE
Outlet ConnectionG 3/8” RH MALEG 3/8” LH MALE
Twin Outlet Valves with Swivel Nut (“Y” Valves)
Order No.10111004711011100472
GasOxygenAcetylene
Swivel NutG 3/8” RHG 3/8” LH
Outlet ConnectionG 3/8” RH MALEG 3/8” LH MALE
These allow two blowpipes to be used from one regulator outlet.
Twin Outlet Valves with Swivel Nut (“Y” Valves)
RH
Order No.
10111006511011100661
LH
Order No.
10111006521011100662
Description
‘Y’ piece with swivel nut G 3/8” fitted with nuts and 10 mm nipples‘T’ piece with G 3/8” RH/LH nuts and 10 mm nipples
Description
‘Y’ piece with swivel nut G 3/8” LH fitted with nuts and 10 mm nipples‘T’ piece with G 3/8” LH nuts and 10 mm nipples
Hose Connector
Order No. (RH)
1011100321
1011100331
1011100341
1011100351
Order No. (LH)
1011100322
1011100332
1011100342
1011100352
Description
Hose connector 3/8 BSP Male x 1/4” Tail
Hose connector 3/8 BSP Male x 5/16” Tail
Hose connector 3/8 BSP Male x 3/8” Tail
Hose connector 3/8 BSP Male x 1/2” Tail
1.25
BUTBRO WELDING PRODUCTS
DISTRIBUTED BY:
Hose Tailpieces
Order No.
1011100320101110031210111003101011100300
Hose Inner Diameter
5-6 mm (1/4”-3/16”) TAPER STEM6 mm (1/4”)6 mm (1/4”)8 mm (5/16”)
Suitable For Unit
G 3/8” LH and RHG 1/4” LH and RHG 3/8” LH and RHG 3/8” LH and RH
Hose Splicers
Order No.
101110017110111001611011100151
Hose Inner Diameter
6 mm (1/4”)8 mm (5/16”)10 mm (3/8”)
Hose Connection Nuts
Order No.
101110028110111002711011100283
Type- RH
G 1/4” RHG 3/8” RHG 9/16” RH
Order No.
101110028210111002721011100284
Type- LH
G 1/4” LHG 3/8” LHG 9/16” LH
Hose Couplers
Order No.
101110025110111002611011100241101110079110111007811011100771
Type- RH
G 1/4” equalG 3/8” x G1/4” unequalG 3/8” equalG 1/2” equalG 3/14” equalG1” equal
Order No.
101110025210111002621011100242101110079210111007821011100772
Type- LH
G 1/4” LHG 3/8” x G 1/4“ unequalG 3/8” equalG 1/2” equalG 3/4” equalG 1” equal
Order No.
10111009011011100903101110090510111009071011100909101110091110111009131011100915
Order No.
10111009021011100904101110090610111009081011100910101110091210111009141011100916
Type- RH
G 1/4” FEMALE x G 3/8” MALEG 3/8” FEMALE x 1/4” MALEG 3/8” FEMALE x 1/4” MALE9/16” x 18 TPI FEMALE x G 1/4” MALE9/16” x 18 TPI FEMALE x G 3/8” MALE9/16” x 18 TPI FEMALE x G 3/8” MALE9/16” x 18 TPI MALE x G 3/8” FEMALEG3/8” MALE x G 1/4” FEMALE
Type- LH
G 1/4” FEMALE x G 3/8” MALEG 3/8” FEMALE x 1/4” MALEG 3/8” FEMALE x 1/4” MALE9/16” x 18 TPI FEMALE x G 1/4” MALE9/16” x 18 TPI FEMALE x G 3/8” MALE9/16” x 18 TPI FEMALE x G 3/8” MALE9/16” x 18 TPI MALE x G 3/8” FEMALEG3/8” MALE x G 1/4” FEMALE
Type
BentStraightSolidStraightStraightBentStraightStraight
Type
BentStraightSolidStraightStraightBentStraightStraight
Hose Adaptors
1.26
BUTBRO WELDING PRODUCTS