by 20 twenty sustainable manufacturing inc. · 2018-07-06 · 20 twenty sustainable manufacturing,...
TRANSCRIPT
20 Twenty Sustainable Manufacturing, Inc.
1 | P a g e
110 Division St. NE, Salem Oregon 97301 | [email protected] | 615.708.6951
Structure
Codes
Factory certified to exceed the ANSI A119.5 Park Model Building Code.
Structural
Engineered and structural-tested by independent, licensed structural engineer. 100% GreenFLEXTM cementitious wall, ceiling and floor facings Full-height 8’ tall walls & ceiling
height.
Roof designed to hold a 60# live load and tested to a 300% safety factor (90#). Floor designed to hold a 30# live load and tested to a 300% safety factor (90#). Engineered for uplift and lateral resistance to seismic category C and 90 MPH wind zone C/100
MPH wind zone B.
Insulation
Solid-core EPS foam insulation, with effective whole-house R-values equivalent to site-built codes, far beyond ANSI requirements.
4” thick panels solid R-18 EPS foam-core insulation 6” thick panels with solid R-26 EPS foam-core insulation
Safety and Environmental
Absolutely NO formaldehyde in or on GreenFLEXTM wall, floor or ceiling facings. 100% non-combustible and non-smoke producing GreenFLEXTM cementitious wall, roof & floor
facings, and concrete floor. Highly recyclable structure of mostly recyclable EPS foam and GreenFLEXTM No off-gassing
Roofing
GAF® white solar reflective, seamless acrylic elastomeric roofing membrane with 10-year manufacturer’s warranty on flat roofs. Easy maintenance/renewal by simply cleaning and painting on additional coats.
25-year manufacturer’s warranty on shingled pitched roofs.
Structural
20 Twenty Sustainable Manufacturing, Inc.
2 | P a g e
110 Division St. NE, Salem Oregon 97301 | [email protected] | 615.708.6951
Structure
Exterior Paint
Manufacturer lifetime guaranteed Miller 5600 Krill satin exterior latex over Glidden 6001-1200 Hydroseal masonry primer.
Exterior Sealants
Only first-class commercial-grade polyurethane exterior caulking. Polyurethane caulking has both superior stretching and bonding ability, typically lasting 10 to
20 years even in commercial exterior applications.
Interior Paint
Miller interior paint/primer.
Trim & Casework
Exterior cement trim cannot burn, rot or be dented. Solid PVC interior trim for supreme moisture resistance.
Flooring
Traditional Stick frame flooring R21 Insulation ¾ inch tongue and groove plywood Rolled Linoleum, Laminate or PVC tile
20 Twenty Sustainable Manufacturing, Inc.
3 | P a g e
110 Division St. NE, Salem Oregon 97301 | [email protected] | 615.708.6951
Structure
Bathrooms
Two-piece white plastic or fiberglass tub/shower or shower unit per plan. White porcelain residential style toilet. White porcelain sink bowl. Chrome or nickel finish faucet’s and bath accessories. Vanity cabinets per plan. Bathroom mirror.
Kitchens
Raised panel cabinetry per plan. Laminate countertops. Stainless steel sink (single or double bowl per plan). Chrome or nickel finish high arc faucet. Appliances per plan.
Electrical
50 Amp electrical service. Ceiling and/or wall sconce lighting throughout. Bathroom vent and vanity light with individual switches. Smoke detector(s) per code. LP detector per code (if required) Carbon Monoxide detector per code. Fire Extinguisher per code. Standard and GFI receptacles per code.
Plumbing & Heating
Electric zonal heating. 20-gallon electric water heater. PEX water lines to code with individual shut offs to all fixtures.
20 Twenty Sustainable Manufacturing, Inc.
4 | P a g e
110 Division St. NE, Salem Oregon 97301 | [email protected] | 615.708.6951
Pitched Roof Examples
20 Twenty Sustainable Manufacturing, Inc.
5 | P a g e
110 Division St. NE, Salem Oregon 97301 | [email protected] | 615.708.6951
Flat Roof Example
20 Twenty Sustainable Manufacturing, Inc.
6 | P a g e
110 Division St. NE, Salem Oregon 97301 | [email protected] | 615.708.6951
Interior Examples
Typical living room example
Basic work housing kitchenette
Luxury kitchen.
20 Twenty Sustainable Manufacturing, Inc.
7 | P a g e
110 Division St. NE, Salem Oregon 97301 | [email protected] | 615.708.6951
20 Twenty Sustainable Manufacturing, Inc.
8 | P a g e
110 Division St. NE, Salem Oregon 97301 | [email protected] | 615.708.6951
20 Twenty Sustainable Manufacturing, Inc.
9 | P a g e
110 Division St. NE, Salem Oregon 97301 | [email protected] | 615.708.6951
20 Twenty Sustainable Manufacturing, Inc.
10 | P a g e
110 Division St. NE, Salem Oregon 97301 | [email protected] | 615.708.6951
Structural
20 Twenty Sustainable Manufacturing, Inc.
11 | P a g e
110 Division St. NE, Salem Oregon 97301 | [email protected] | 615.708.6951
Structural
20 Twenty Sustainable Manufacturing, Inc.
12 | P a g e
110 Division St. NE, Salem Oregon 97301 | [email protected] | 615.708.6951
The information supplied in this document is for information purposes only and should not be construed as a warranty. All implied warranties are expressly disclaimed. All drawings and pictures are artist's renditions and may vary from the actual product. GreenFLEX reserves the right, at any time, to make changes to this document, the product design, material or component specifications without notice. Insulation claims based on research that concludes standard R-21 2x4 frame walls have real-world R-values of approximately R-13 vs. GreenFLEX wall R values of approximately R-18. All content, design, text and other materials contained within this brochure are copyrighted by GreenFLEX. All rights reserved.