Radio / CD

Casablanca CD50

Operating instructions

2

Open here

Ouvrir s.v.p.

Por favor, abrirFavor abrir

3

FR

AN

ÇA

ISE

NG

LIS

HE

SPA

ÑO

LP

OR

TUG

UÊ

S3

2

10

1

4

5

11

6

7 98

1213141516

4

OPERATING ELEMENTS1 button to unlock release

panel2 Volume control3 ON button, switches the unit

on/off, mute4 RDS button, switches the RDS

function on/offSelects display for variable text

5 FM button, selects the FMwaveband and the FM memorybankTS, starts the TravelStorefunction

6 Display7 button, displays the time

DIS, changes display contents8 MENU button, accesses the

menu for basic settings9 button, opens the flip release

panel: Cursor button block; OK button, confirms menu

selections and starts the SCANfunction

< DEQ button, adjusts theequalizer

= AUD button, adjusts bass, treble,balance and faderLD, switches the Loudnessfunction on/off

> 1 to 6 station buttons? AM button, selects the AM

waveband@ CD•C button, switches sound

source between radio, CD playerand CD changer (if connected)

5

FR

AN

ÇA

ISE

NG

LIS

HE

SPA

ÑO

LP

OR

TUG

UÊ

S

CONTENTS

Important information .............. 6Traffic safety .................................... 6Installation ....................................... 6Accessories .................................... 6Guarantee ....................................... 6International telephone information ... 6

Removable front panel ............. 7Switching the car audiosystem on/off........................... 8

Volume control ......................... 9Adjusting the power-on volume ........ 9Mute ............................................... 9Telephone audio/Navigation audio .... 9Speed-dependent volumeadjustment .................................... 10Adjusting the volume of the beep ... 10

Radio operation...................... 11Switching to the radio mode .......... 11RDS function ................................. 11Selecting the waveband/memorybank .............................................. 11Tuning into radio stations ............... 11Adjusting seek tuning sensitivity ..... 11Storing radio stations ..................... 12Storing radio stations automatically(TravelStore) .................................. 12Recalling stored radio stations ....... 12Scanning the radio stations withinreception range (SCAN) ................ 12Adjusting the scan time ................. 13Optimising radio reception ............. 13Selecting the display of variabletext ................................................ 13Adjusting the tuner ........................ 14

CD player operation ............... 14Starting CD player operation ......... 14Selecting tracks ............................ 15

Audible fast forward/reverse(CUE/REVIEW) ............................. 15Playing tracks in random order(MIX) ............................................. 15Scanning tracks (SCAN) ............... 15Repeating individual tracks(REPEAT) ...................................... 15Interrupting playback (PAUSE) ...... 15Switching the display mode ........... 16Naming CDs ................................. 16Removing the CD .......................... 16

CD changer operation............ 17Starting CD changer operation ...... 17Selecting CDs ............................... 17Selecting tracks ............................ 17Audible fast forward/reverse(CUE/REVIEW) ............................. 17Switching the display mode ........... 17Repeating individual tracks orentire CDs (REPEAT) .................... 17Playing tracks in random order(MIX) ............................................. 17Scanning all of the tracks on allof the CDs (SCAN) ....................... 18Interrupting playback (PAUSE) ...... 18Naming CDs ................................. 18

Clock ...................................... 19

Adjusting the tone andbalance/fader ........................ 21

Switching Loudness on/off .... 21Equalizer ................................ 22

External audio sources .......... 25

Specifications ........................ 25

Installation instructions .......... 96

6

Important informationBefore you use your car audio systemfor the first time, please take the time toread the instruction manual carefullyand make yourself familiar with the au-dio equipment. Keep this manual handyin your car for future reference.

Traffic safety Traffic safety is always the top

priority. Do not attempt to operateyour car audio system unless the traf-fic conditions permit. Familiarizeyourself with the equipment beforeyou start driving.Always make sure that you are stillable to hear any warning signalscoming from outside the vehicle,such as police or fire engine sirens,at all times.As a result, please always select amoderate volume for playing your caraudio system while you are driving.

InstallationIf you would like to install your new carstereo yourself or add other audio com-ponents to the existing ones, thenplease read the instructions on installa-tion and connection at the end of thismanual carefully.

AccessoriesUse only Blaupunkt-approved accesso-ries.

Remote control unitThe optionally available RC 08 infraredremote control unit allows you to con-veniently operate the most important

IMPORTANT INFORMATIONsystem functions from the steeringwheel.

AmplifiersAll Blaupunkt amplifiers can be used.

CD changersThe following CD changers can be con-nected directly: CDC A 06, CDC A 08,CDC A 072 and IDC A 09.The CDC A 05 and CDC A 071 can beconnected with an adapter cable (Blau-punkt no. 7 607 889 093).

GuaranteeThe scope of the guarantee is deter-mined by the laws in the country wherethe unit is purchased.Regardless of the legal guarantee reg-ulations, Blaupunkt affords a 12-monthguarantee.If you have any questions about theguarantee, please contact your author-ised Blaupunkt dealer. Your cash regis-ter receipt is a valid guarantee coupon.

International telephoneinformationHave you got any questions on theoperation of this equipment or do yourequire more information?Give us a call!You will find the international telephoneand fax numbers on the last page of thismanual.

7

FR

AN

ÇA

ISE

NG

LIS

HE

SPA

ÑO

LP

OR

TUG

UÊ

S

REMOVABLE FRONT PANEL

Removable front panel

Theft protection systemTo prevent your car audio system frombeing stolen, it has been equipped witha removable front panel (flip releasepanel). Without the front panel, the caraudio system is useless to thieves.Protect your car audio system againsttheft and take the operating panel withyou each time you leave the vehicle.Never leave the release panel in the car,even if it is well hidden. The panel hasbeen designed so that it is easy to re-move.

Notes:● Do not drop the release panel.

● Do not expose the release panel todirect sunlight or other heat sourc-es.

● Store the release panel in the casesupplied.

Removing the operating panel➮ Press 1.

The release panel will unlock.

1

➮ First pull the operating panel for-ward and then slide it to the left toremove it.

● When you remove the operatingpanel, the car audio system will au-tomatically switch off.

● All of the settings will remainstored.

● A CD inserted into the car audiosystem will remain in place.

Replacing the operating panel➮ Slide the operating panel into the

guides from left to right.

➮ Press the left-hand side of the pan-el onto the car audio system until itlocks into place.

Note:● While replacing the panel, be care-

ful not to press on the display.If the car audio system was on whenyou removed the panel, it will automat-ically switch back on using the same set-tings when you replace it (radio, CDplayer or CD changer).

8

Switching the car audiosystem on/offThe car audio system can be switchedon/off in a number of ways.

Switching the car audio system on/off with the ignitionIf the car audio system has been con-nected to your vehicle ignition, it is pos-sible to switch it on and off with the igni-tion.You can also switch the car audio sys-tem on when the ignition is switched off.

➮ Press down and hold 3 until thecar audio system switches on.

Note:To prevent the car battery from runningdown, the radio will switch off again au-tomatically after one hour.

Switching the car audio system on/off with the removable front panel

➮ Remove the release panel.

The car audio system will switch off.

➮ Replace the release panel.

The car audio system will switch onagain. The last settings used (radio, CDplayer or CD changer) will be activated.

Switching the car audio system on/off by pressing 3

➮ Press 3 to switch the car audiosystem on.

➮ Press 3 for longer than 2 secondsto switch the car audio system offagain.

The system will then switch off.

Switching the car audio system onby inserting a CDIf the system is switched off and thereis no CD in the CD player,

➮ press 9.

The flip release panel will open.

➮ Insert the CD into the CD playerwith the label facing up until youfeel slight resistance. Do not useforce.

The CD will be pulled automatically intothe CD player.Do not attempt to assist or prevent thisprocess.

➮ Press the operating panel closedgently until you feel it click intoplace.

The audio system will switch on. CDplayback will begin.

SCHWITCHING ON/OFF

9

FR

AN

ÇA

ISE

NG

LIS

HE

SPA

ÑO

LP

OR

TUG

UÊ

S

Volume controlThe car audio system volume can beadjusted to levels from 0 (off) to 66 (max-imum).

➮ To increase the volume, turn thevolume control knob 2 to theright.

➮ To decrease the volume, turn thevolume control knob 2 to the left.

Adjusting the power-on volumeIt is possible to adjust the volume atwhich the car audio system switches on.

➮ Press MENU 8.

➮ Press : repeatedly until “ONVOLUME” appears in the display.

➮ Press : to adjust the vol-ume.

If you adjust this setting to “0”, the caraudio system will switch on at the vol-ume used before it was switched off.

Warning of serious injuryIf the power-on volume is set to themaximum level, it may be extremelyloud when the car audio system isswitched on.If the power-on volume is set to 0 andthe car audio system was played atmaximum volume before it wasswitched off, it may be extremely loudwhen the car audio system isswitched back on. This could resultin serious injury to your ears!

➮ Once you have selected the de-sired settings, press MENU 8 orOK ;.

MuteYou can reduce the volume of the caraudio system immediately (mute).

➮ Press 3 briefly.

“MUTE” will appear in the display.

Selecting the mute levelIt is possible to select the mute level.

➮ Press MENU 8.

➮ Press : repeatedly until “MUTELEVEL” appears in the display.

➮ Press : to select the mutelevel.

➮ Once you have made your selec-tion, press MENU 8 or OK ;.

Telephone audio/NavigationaudioIf your car audio system is equipped witha mobile telephone or a navigation sys-tem, it will automatically switch to mutewhen you use the phone or when voiceoutput from the navigation system isemitted. The car speakers will then beused for the phone call or the voice out-put. This will not work unless the mo-bile phone or the navigation system isconnected to the car audio system asdescribed in the installation instructions.To find out which navigation systemscan be used with your car radio, con-tact a Blaupunkt specialist dealer.The volume at which phone calls ornavigation voice output are heard canbe adjusted.

➮ Press MENU 8.

➮ Press : repeatedly until “TEL/NAVI VOL” appears in the display.

VOLUME CONTROL

10

➮ Press : to select the desiredvolume level.

➮ Once you have made your selec-tion, press MENU 8 or OK ;.

Speed-dependent volumeadjustmentThis function automatically adjusts thevolume to your driving speed. For thisto function properly, your car radio mustbe connected as described in the instal-lation instructions.The automatic volume adjustment canbe set to six levels (0 to 5).

➮ Press MENU 8.

➮ Press : repeatedly until “AUTOSOUND” appears in the display.

➮ Press : to select the desiredvolume adjustment.

➮ Once you have made your selec-tion, press MENU 8 or OK ;.

Note:The best setting for the speed-depend-ent volume adjustment depends on howmuch driving noise you experience inyour vehicle. Use a process of trial anderror to find the best setting for yourvehicle.

Adjusting the volume of thebeepFor a number of functions you will heara beep if you press a key for longer than2 seconds, e.g. if you want to store aradio station on a station preset. You canadjust the volume level of this beep.

➮ Press MENU 8.

➮ Press : repeatedly until“BEEP” appears in the display.

➮ Press : to adjust the volume.“0” means the beep volume is off,“9” means the beep volume is ad-justed to the maximum volume.

➮ Once you have adjusted the set-tings, press MENU 8 or OK ;.

VOLUME CONTROL

11

FR

AN

ÇA

ISE

NG

LIS

HE

SPA

ÑO

LP

OR

TUG

UÊ

S

RADIO OPERATION

Radio operation

Switching to the radio modeIf you are currently using the CD playeror CD changer,

➮ press CD•C @ repeatedly until“RADIO” appears in the display.

RDS functionThis car audio system has beenequipped with an RDS radio receiver.Many FM radio stations now transmit asignal which contains such other infor-mation as the station name along withtheir regular programming. As soon asthe radio station name is detected, it willappear in the display. The RDS func-tion can be switched on or off.

Switching the RDS function on/off

➮ To take advantage of the RDSfunction, press RDS 4.

When the RDS function has been acti-vated, the RDS symbol will light up inthe display.

Selecting the waveband/memory bankThe car audio system is able to receiveFM and AM radio programs. There arethree memory banks for the FM wave-band and one memory bank for the AMwaveband.Up to six radio stations can be storedon each of the memory banks.

➮ To switch between the FM memorybanks, press FM / TS 5.

➮ To select the AM waveband, pressAM ?.

Tuning into radio stationsYou can tune into radio stations in anumber of different ways.

Automatic seek tuning

➮ Press or :.

The radio will tune into the next availa-ble station within reception range.

Manual station selectionYou can also tune into radio stationsmanually.

➮ Press or :.

Note:You cannot use manual tuning unlessthe RDS function is deactivated.

Paging through the broadcastingnetwork (for FM only)If a radio broadcasting network hasmore than one station, you can pagethrough the “station network”.

➮ Press or : to tune into thenext station in the network.

Note:To take advantage of this function, youmust have activated the RDS function.

It is only possible to tune into those sta-tions which have been received oncebefore already. To do this, use the SCANor TravelStore function.

Adjusting seek tuning sensitivityIt is possible to adjust the sensitivity ofthe seek tuning function to tune the ra-dio into stations with strong receptionsignals only, or to those with weakerreception signals as well.

12

➮ Press MENU 8.

➮ Press : repeatedly until“SENS” appears in the display.

➮ Press :.

The currently selected setting will ap-pear in the display. “SENS HI” indicatesthe highest level of sensitivity, “SENSLO” the lowest. If you select “SENS LO”,“lo” will light up in the display.

➮ Press : to select the desiredsensitivity.

➮ Once you have made your selec-tion, press MENU 8 or OK ;.

Storing radio stations

Storing radio stations manually

➮ Select the desired FM memorybank FM1, FM2, FMT or the AMwaveband.

➮ Tune the radio into the desired sta-tion.

➮ Press and hold down one of thestation preset buttons 1 to 6 > onwhich you want to store the radiostation for longer than two seconds.

Storing radio stationsautomatically (TravelStore)You can automatically store the six ra-dio stations with the strongest receptionin your current reception area (for FMonly). These stations will be stored inthe FMT memory bank.

Note:Any stations stored previously in thememory bank will be deleted.

➮ Press and hold down FM / TS 5for longer than two seconds.

The storing process will begin.“TRAVEL-STORE” will appear in thedisplay. After the stations have beenstored, the radio will automatically be-gin to play the station stored on presetbutton 1 for the FMT memory bank.

Recalling stored radio stations➮ Select the desired station memory

bank.

➮ Press the station button 1 to 6 >on which you have stored the de-sired radio station.

Scanning the radio stationswithin reception range (SCAN)You can scan all of the radio stationscurrently within your reception range.The scan time can be set in the menuto play from five to 30 seconds.

Starting SCAN

➮ Press and hold down OK ; forlonger than two seconds.

SCAN will begin. “SCAN” will appearbriefly in the display, followed by theflashing station name or frequency ofthe radio station currently beingscanned.

Stopping the SCAN function,continuing to listen to the radiostation scanned

➮ Press OK ;.

SCAN will end and the last stationscanned will continue playing.

RADIO OPERATION

13

FR

AN

ÇA

ISE

NG

LIS

HE

SPA

ÑO

LP

OR

TUG

UÊ

S

Adjusting the scan time➮ Press MENU 8.

➮ Press : repeatedly until“SCANTIME” appears in the dis-play.

➮ Press : to set the scan timeas desired.

➮ Once you have made your selec-tion, press MENU 8 or OK ;.

Note:The scan time selected also applies tothe SCAN function for theCD player andthe CD changer operation.

Optimising radio reception

Interference-related treble cut(HICUT)The HICUT function improves receptionwhen reception begins to deteriorate. Ifinterference occurs, then the treble andthe noise is cut automatically.

Switching HICUT on/off

➮ Press MENU 8.

➮ Press : repeatedly until “HI-CUT” appears in the display.

➮ Press or : to switch HICUTon or off.

“HICUT 0” indicates that the function isswitched off; when “HICUT 3” appears,the treble will be automatically cut asfar as possible.

➮ Press MENU 8 or OK ;.

RADIO OPERATION

Interference-dependent bandwidthswitching (SHARX)The SHARX function allows you to vir-tually eliminate interference from neigh-bouring radio stations. When you are ina reception area with a large number ofradio station signals, switch the SHARXfunction on.

Switching SHARX on/off

➮ Press MENU 8.

➮ Press : repeatedly until“SHARX” appears in the display.

➮ Press or : to switch SHARXon or off.

“SHARX OFF” means no bandwidthswitching, “SHARX ON” means auto-matic bandwidth switching.

➮ Press MENU 8 or OK ;.

Selecting the display of variabletextA number of radio stations use the RDSsignal to transmit advertising or othertexts in place of their station names.These “variable texts” will appear in thedisplay. It is possible to adjust your ra-dio so that these “variable texts” do notappear.

➮ Press and hold down RDS 4 until“NAME FIX” appears in the display.

➮ To have the “variable texts” dis-played again, press and hold downRDS 4 until “NAME VAR” appearsin the display.

14

Adjusting the tunerThis car audio system has beenequipped with a multiband tuner. Thetuner can be adjusted to accommodatecountry-specific requirements. Theavailable regions are: America, Europe,Asia and Thailand. The tuner is not fullyfunctional unless it has been set to thecountry in which it is used.

Adjusting the tuner

➮ Press MENU 8.

➮ Press : repeatedly until “FMTUNER” appears in the display.

➮ Press : to select the country.

➮ Once you have completed the set-ting, press MENU 8 or OK ;.

CD player operationThe CD player in this car audio systemcan be used to play conventional mu-sic CDs with a diameter of 12 cm.

Danger of damage to the CDplayer!CD singles with a diameter of 8 cmand contour CDs (shape CDs) arenot suitable for use with this CD play-er.We assume no liability for any dam-age done to the CD player resultingfrom the use of unsuitable CDs.

Starting CD player operation● If there is no CD in the player,

➮ press 9.

The flip release panel will open.

➮ Insert a CD into the player with thelabel facing up until you feel slightresistance. Do not use force.

The CD will be pulled into the playerautomatically.Do not attempt to assist or prevent thisprocess.

➮ Press the operating panel closedgently until you feel it click intoplace.

The audio system will switch on. CDplayback will begin.

● If there already is a CD insertedinto the player,

➮ press CD•C @ repeatedly until“CD” appears in the display.

Playback will resume at the point whereit was interrupted.

RADIO OPERATION CD PLAYER OPERATION

15

FR

AN

ÇA

ISE

NG

LIS

HE

SPA

ÑO

LP

OR

TUG

UÊ

S

Stopping the SCAN function,continue listening to the currenttrack

➮ To stop the SCAN function, pressOK ;.

The track currently scanned will contin-ue playing.

Repeating individual tracks(REPEAT)➮ To repeat the track currently play-

ing, press 4 RPT >.

“REPEAT TRCK” will appear in the dis-play, the RPT symbol will light up. Thetrack will continue to repeat until RPT isdeactivated.

Stopping the REPEAT function

➮ If you want to stop the REPEATfunction, press 4 RPT > again.

“REPEAT OFF” will appear briefly in thedisplay, the RPT symbol will no longerlight up. CD playback will resume nor-mally.

Interrupting playback (PAUSE)➮ Press 3 >.

“PAUSE” will appear in the display.

Stopping PAUSE

➮ Press 3 > during the pause.

Playback will resume.

Selecting tracks➮ Press a key on the cursor block :

to select the next or the previoustrack.

Press or : once to restart thesame track.

Audible fast forward/reverse(CUE/REVIEW)To start Cue or Review,

➮ press and hold down either or : until the process begins.

Playing tracks in random order(MIX)➮ Press 5 MIX >.

“MIX CD” will appear briefly in the dis-play, the MIX symbol will light up in thedisplay. The next track played will beselected at random.

Stopping the MIX function

➮ Press 5 MIX > again.

“MIX OFF” will appear briefly in the dis-play and the MIX symbol will no longerlight up.

Scanning tracks (SCAN)You can scan all of the tracks on theCD.

➮ Press OK ; for longer than twoseconds. Scanning will begin withthe next track.

Note:It is possible to adjust the scan time. Formore information, read the section on“Adjusting the scan time” in the chapteron “Radio Operation”.

CD PLAYER OPERATION

16

Switching the display mode➮ To switch the display between the

track number and time or the tracknumber and elapsed playing timeor track number and CD name,press / DIS 7 for longer thantwo seconds once or repeatedlyuntil the desired display becomesvisible.

Naming CDsTo help you to identify your CDs moreeasily, the car audio system allows youto individually name up to 30 CDs. Thename can be made up of up to eightletters. If you attempt to enter more than30 names, “FULL” will appear in the dis-play.

Entering/editing CD names

➮ You are listening to the CD youwant to name.

➮ Press MENU 8.

➮ Press : to select“CD NAME”.

➮ Press or : twice.

The car audio system is now in the editmode. If the CD you selected does notyet have a name, eight dashes will ap-pear in the display.

➮ The first input position will flash.

➮ Press : to select the letteryou want to enter. If you want toleave this position blank, select thedash.

➮ Press or : to move the cur-sor to a different input position.

➮ Press MENU 8 or OK ; to storethe name.

Deleting a CD name

➮ You are listening to a CD andwould like to delete its name.

➮ Press MENU 8.

➮ Press : to select“CD NAME”.

➮ Press or :.

➮ Press and hold down MENU 8.After four seconds you will hear abeep and “DELETE NAME” will ap-pear in the display.

➮ Release MENU 8.

The CD name will be deleted.

➮ Press OK ; to return to the menu.

Removing the CD➮ Press 9 to activate the eject func-

tion.

The flip release panel will fold down, theCD will eject.

➮ Remove the CD and close the oper-ating panel.

CD PLAYER OPERATION

17

FR

AN

ÇA

ISE

NG

LIS

HE

SPA

ÑO

LP

OR

TUG

UÊ

S

CD changer operation

Note:For information on how to handle CDs,how to insert CDs into the changer andhow to operate the changer, please re-fer to the instructions included with theCD changer.

Starting CD changer operation➮ Press CD•C @ repeatedly until

“CHANGER” appears in the dis-play.

Playback will begin with the first CD thechanger detects in the magazine.

Selecting CDs➮ To select a CD up or down in the

magazine, press or : therequired number of times.

Selecting tracks➮ To select a different track on the

CD currently playing, press or : the required number of times.

Audible fast forward/reverse(CUE/REVIEW)To start Cue or Review,

➮ press and hold down either or : until the process begins.

Switching the display mode➮ To switch the display between the

track number and elapsed playingtime or the track number and time,or track number and CD number ortrack number and CD name, press

/ DIS 7 for longer than twoseconds once or repeatedly as re-

quired, until the desired informationappears in the display.

Repeating individual tracks orentire CDs (REPEAT)➮ To repeat the track currently play-

ing, press 4 RPT > briefly.

“REPEAT TRCK” will appear briefly inthe display, RPT will light up in the dis-play.

➮ To repeat the entire CD currentlyplaying, press 4 RPT > again.

“REPEAT DISC” will appear briefly in thedisplay, RPT will light up in the display.

Stopping the REPEAT function

➮ To stop the REPEAT function forthe current track or CD, press4 RPT > repeatedly until“REPEAT OFF” appears in the dis-play and RPT no longer lights up.

Playing tracks in random order(MIX)➮ To play the tracks of the currently

selected CD in random order,press 5 MIX > briefly.

“MIX CD” will appear briefly in the dis-play, MIX will light up in the display.

➮ To play the tracks of all of the CDsin random order, press 5 MIX >again.

“MIX ALL” will appear briefly in the dis-play, MIX will light up in the display.

Note:The CDC A 08 and the IDC A 09 arealso able to play all of the CDs in thechanger in random order. The other CD

CD CHANGER OPERATION

18

changers first play all of the tracks on aCD in random order and then select thenext CD in the changer.

Stopping the MIX function

➮ To stop the MIX function, press5 MIX > repeatedly until “MIXOFF” appears briefly in the displayand MIX no longer lights up.

Scanning all of the tracks on allof the CDs (SCAN)➮ To scan all of the tracks on all of

the CDs in ascending order, pressOK ; for longer than two sec-onds.

“SCAN” will appear in the display.

Stopping the SCAN function

➮ To stop the SCAN function, pressOK ; briefly.

The track currently scanned will contin-ue playing.

Note:It is possible to adjust the scan time. Formore information, read the section on“Adjusting the scan time” in the chapteron “Radio Operation”.

Interrupting playback (PAUSE)➮ Press 3 >.

“PAUSE” will appear in the display.

Stopping PAUSE

➮ Press 3 > during the pause.

Playback will resume.

Naming CDsTo help you to identify your CDs moreeasily, the car audio system allows youto individually name up to 99 CDs. Thename can be made up of up to sevenletters.If you attempt to enter more than 99names, “FULL” will appear in the display.

Entering/editing CD names

➮ Press MENU 8.

➮ Press : to select “CDCNAME”.

➮ Press or :.

The car audio system is now in selec-tion mode.

➮ Press : to select the CDyou would like to name.

➮ Press or :.

Now you are in the edit mode. If the CDyou selected does not yet have a name,seven dashes will appear in the display.

➮ The first input position will flash.

➮ Press : to select the letteryou want to enter. If you want toleave this position blank, select thedash.

➮ Press or : to move the cur-sor to a different input position.

➮ Press MENU 8 or OK ; to storethe name.

Deleting a CD name➮ You are listening to a CD and

would like to delete its name.

➮ Press MENU 8.

CD CHANGER OPERATION

19

FR

AN

ÇA

ISE

NG

LIS

HE

SPA

ÑO

LP

OR

TUG

UÊ

S

➮ Press : to select “CDCNAME”.

➮ Press or :.

➮ Press and hold down MENU 8.After four seconds you will hear abeep and “DELETE NAME” will ap-pear in the display.

➮ Release MENU 8.

The CD name will be deleted.

➮ Press OK ; to return to the menu.

Deleting all of the CD namesYou want to delete all of the names en-tered for the CDs.

➮ You are listening to a CD.

➮ Press MENU 8.

➮ Press : to select “CDCNAME”.

➮ Press or :.

➮ Press and hold down MENU 8.After four seconds you will hear abeep and “DELETE NAME” will ap-pear in the display. Continue tohold down MENU 8 until you heara second beep and “DELETE ALL”appears in the display.

➮ Release MENU 8.

All of the CD names stored will be de-leted.

➮ Press OK ; to return to the menu.

CLOCK

Displaying the clock briefly➮ To display the time briefly, press

/ DIS 7 briefly.

Setting the timeThe time can be set automatically bythe RDS signal. If you are unable to re-ceive an RDS radio station or if the RDSstation you are listening to does not sup-port this function, you can also set thetime manually.

Setting the time automatically

➮ To set the time automatically, pressMENU 8.

➮ Press : until “CLOCK MAN”(manual) or “CLOCK AUTO” (auto-matic) appears in the display.

➮ Press : until “CLOCK AUTO”appears in the display.

➮ Once you have made your selec-tion, press MENU 8 or OK ;twice.

When you tune into a radio station withthe RDS clock function (RDS-CT), thetime will be set automatically.

Setting the time manually

➮ To set the time, press MENU 8.

➮ Press : repeatedly until“CLOCKSET” appears in the dis-play.

➮ Press :.

The time will appear in the display. Theminutes will flash and can be altered.

CD CHANGER OPERATION CLOCK

20

➮ Press : to alter the minutes.

➮ Once you have altered the min-utes, press :. The hours willbegin to flash.

➮ Press : to alter the hours.

➮ Press MENU 8 or OK ;.

Selecting the 12/24-hour timedisplay mode➮ Press MENU 8.

“MENU” will appear in the display.

➮ Press : repeatedly until “24 HMODE” or “12 H MODE” appearsin the display.

➮ Press or : to switch the dis-play mode.

➮ Once you have selected the mode,press MENU 8 or OK ;.

Activating the clock for displaywhen the car audio system isswitched off➮ To activate the clock for display

when the car audio system isswitched off, press MENU 8.

“MENU” will appear in the display.

➮ Press : repeatedly until “CLKDISP OFF” or “CLK DISP ON” ap-pears in the display.

➮ Press or : to switch the clockdisplay on or off.

➮ Once you have made the setting,press MENU 8 or OK ;.

Displaying the time briefly whenthe car radio is switched offTo display the time briefly when the carradio is switched off,

➮ press / DIS 7.

The time will then appear in the displayfor eight seconds.

CLOCK

21

FR

AN

ÇA

ISE

NG

LIS

HE

SPA

ÑO

LP

OR

TUG

UÊ

S

Adjusting the tone andbalance/fader

Adjusting the bass➮ To adjust the bass, press AUD / LD

=.

“BASS” will appear in the display.

➮ Press or : to alter the bass.

Adjusting the treble➮ To adjust the treble, press AUD /

LD =.

“BASS” will appear in the display.

➮ Press : until “TREBLE” ap-pears in the display.

➮ Press or : to alter the treble.

Adjusting the balance➮ To adjust the balance, press AUD /

LD =.“BASS” will appear in the display.

➮ Press : until “BALANCE” ap-pears in the display.

➮ Press or : to alter the bal-ance.

Adjusting the fader➮ To adjust the fader, press AUD / LD

=.

“BASS” will appear in the display.

➮ Press : until “FADER” appearsin the display.

➮ Press or : to alter the fader.

Switching Loudness on/offLoudness boosts the bass and treblewhen the volume is low to create a morenatural sound.

➮ Press AUD / LD = for approx. twoseconds.

LD will light up in the display to indicatethat Loudness is active.

Adjusting Loudness intensityThe Loudness boost can be set instages from one to six.

➮ Press MENU 8.

“MENU” will appear in the display.

➮ Press : repeatedly until“LOUDNESS” appears in the dis-play.

➮ Press or : to alter the Loud-ness setting.

➮ Once you have completed adjust-ing the settings, press MENU 8 orOK ;.

TONE AND BALANCE/FADER

22

EqualizerThis car audio system is equipped witha parametric digital equalizer. In thiscase, parametric means that it is possi-ble to individually raise or lower one fre-quency (GAIN +10 to -20 dB) for eachof the five filters.The following filters are available:● SUB LOW EQ 32 to 50 Hz

● LOW EQ 63 to 250 Hz

● MID EQ 315 to 1250 Hz● MID/HIGH EQ 1600 to 6300 Hz

● HIGH EQ 8000 to 12500 Hz

These filters can be adjusted without theuse of measuring equipment. As a re-sult, it is possible to significantly influ-ence the in-vehicle acoustics.

Notes on making equalizersettingsWe recommend that you use a CD youare familiar with to make the settings.

Before you set the equaliser, set bass,treble, balance and fader to “0” and de-activate the Loudness function. Formore information on how to do this, re-fer to the section on “Tone and balance/fader”.

➮ Now listen to the CD you have se-lected.

➮ Evaluate the sound according toyour own personal preferences.

➮ Now refer to “Sound impression” inthe following table.

➮ Make the settings for the equalizeras described under “What to do”.

Switching the equalizer on/off➮ To switch the equalizer on, press

and hold down DEQ < until EQlights up in the display and “EQON” appears briefly.

➮ To switch the equalizer off, pressand hold down DEQ < until EQno longer lights up in the displayand “EQ OFF” appears briefly.

Adjusting the equalizer➮ Press DEQ <.

➮ Press or : to select“DIGITAL EQ”.

➮ Press or : to select the filter.

➮ Press or :.

➮ To select the frequency, press :.

➮ To adjust the level, press or :.

➮ To select the next filter, first pressOK ; and then or :.

➮ Once you have completed makingall of the necessary adjustments,press DEQ <.

EQUALIZER

23

FR

AN

ÇA

ISE

NG

LIS

HE

SPA

ÑO

LP

OR

TUG

UÊ

S

Selecting a sound presetYou can also select sound presets forthe following types of music:● CLASSIC

● POP

● JAZZ● ROCK

● TECHNO

● SPEECHThe settings for these types of musichave already been defined.

➮ Press DEQ <.

➮ Press or : repeatedly until“SOUND PRESET” appears in thedisplay.

➮ Press or : to select the de-sired sound preset.

➮ Press DEQ < or OK ;.

Selecting a car presetTo further improve the sound propertiesin your vehicle, you can also select yourvehicle type.

● COMPACT

● LIMOUSINE

● VAN● ROADSTER

● MINI

● TRUCKThe settings for these types of vehicleshave already been defined.

EQUALIZER

➮ Press DEQ <.

➮ Press or : repeatedly until“CAR PRESET” appears in the dis-play.

➮ Press or : to select the de-sired car preset.

➮ Press DEQ < or OK ;.

Adjusting the spectrometerThe spectrometer in the display usessymbols to temporarily indicate whatadjustments are made to the volume,the tone and balance/fader and theequalizer settings.

If no adjustments are being made to thesystem, the spectrometer displays theoutput level of the car radio.You can select the type of spectrome-ter you want displayed in the menu.There are two different types available.

Selecting the spectrometer type

➮ Press MENU 8.

“MENU” will appear in the display.

➮ Press : repeatedly until “EQDISPLAY” appears in the display.

➮ Press or : to select either“SPECTRUM 1”, “SPECTRUM 2”or “EQ DISP OFF”.

➮ Once you have completed adjust-ing the settings, press MENU 8 orOK ;.

24

EQUALIZERA

ssis

tanc

e in

set

ting

your

equ

alis

erS

tart

to m

ake

your

set

tings

in th

e m

id-r

ange

/treb

le a

nd e

nd it

with

the

bass

ran

ge.

Fre

qu

ency

ran

ge

Bas

s32

to 1

00 H

z

Low

er m

id-r

ang

e10

0 to

400

Hz

Mid

-ran

ge s

ou

nd

400

to 4

000

Hz

Treb

le40

00 to

125

00 H

z

Wh

at to

do

Boo

st th

e ba

ss w

ith th

e “S

UB

LO

WE

Q”,

“LO

W E

Q” f

ilter

Freq

uenc

y: 5

0 to

100

Hz

Gai

n: +

4 to

+6

dB

Red

uce

the

low

er m

idra

nge

with

the

“LO

W E

Q”,

“MID

EQ

” filt

erFr

eque

ncy:

125

to 4

00 H

zG

ain:

app

rox.

-4

dB

Red

uce

the

mid

-ran

ge w

ith “

MID

EQ

”, “

MID

HIG

H E

Q” f

ilter

Freq

uenc

y: 1

000

to 2

500

Hz

Gai

n: -4

to -6

dB

Boo

st tr

eble

rang

e w

ith“M

ID H

IGH

EQ

”, “H

IGH

EQ

” filt

erFr

eque

ncy:

app

rox.

125

00 H

zG

ain:

+2

to +

4 dB

So

un

d im

pre

ssio

n/p

rob

lem

Bas

s re

prod

uctio

n to

o w

eak

Unc

lear

bas

sP

layb

ack

reve

rber

ates

Unp

leas

ant p

ress

ure

on th

e ea

rs

Sou

nd a

ppea

rs to

be

too

muc

h in

the

fore

grou

nd, v

ery

aggr

essi

ve,

no s

tere

o ef

fect

Life

less

rep

rodu

ctio

nLa

ck o

f tra

nspa

renc

yIn

stru

men

ts d

o no

t spa

rkle

25

FR

AN

ÇA

ISE

NG

LIS

HE

SPA

ÑO

LP

OR

TUG

UÊ

S

External audio sourcesIn addition to the CD changer it is alsopossible to connect another external au-dio source to the line output. Thesesources can include a portable CD play-er, MiniDisc player or MP3 player.If you have not connected a CD chang-er, it is possible to connect two externalaudio sources.You must activate the AUX output in themenu.If you would like to connect another ex-ternal audio source, you will require anadapter cable. This adapter cable canbe ordered from any authorized Blau-punkt dealer.

Switching the AUX output on/off➮ Press MENU 8.

“MENU” will appear in the display.

➮ Press : repeatedly until “AUX-IN-1 OFF” or “AUX-IN-1 ON” ap-pears in the display.

In place of the “1”, there is a “2” for thesecond AUX input. If you have connect-ed a CD changer, then only AUX “2” canbe selected.

➮ Press or : to switch AUX onor off.

➮ Once you have completed yourselections, press MENU 8 orOK ;.

Note:If the AUX input has been switched ON,you can select it by pressing CD•C @.

Specifications

AmplifierOutput power: 4 x 25 watts RMS

acc. to DIN 45 324at 14.4 V4 x 40 watts max.power

TunerWavebands:FM: 87.5 - 107.9 MHzAM: 530 - 1710 kHz

FM Mono sensitivity:7.8 dBf

FM frequency response:30 - 15000 Hz

CD playerSignal-to-noise ratio:

96 dB

Frequency response:20 - 20000 Hz

Preamp Out4 channels: 4 V

Subject to technical modification!

EXTERNAL AUDIO SOURCES SPECIFICATIONS

Service numbers / Numéros du service après-vente /Números de servicio / Número de serviço

Tel.: Fax:

Deutschland 0 18 05 00 02 25 0 51 21 49 40 02Belgique / België 0 25 25 54 44 0 25 25 54 48France 014 010 70 07 014 010 73 20Nederland 023 565 63 48 023 565 63 31Great Britain 018 958 383 66 018 958 383 94Danmark 44 89 83 60 44 89 86 44Sverige 08 750 15 00 08 750 18 10Norge 66 81 70 00 66 81 71 57Suomi 094 359 91 094 359 92 36Österreich 01-6 10 39-0 01-6 10 39-391EÏÏ¿˜ 015 762 241 015 769 473âeská republika 026 130 04 41 026 130 05 14USA 800-266 25 28 708-681 71 88Singapore 006 535 054 47 006 535 053 12Slovensko 042 175 873 212 042 175 873 229

03/00 TRO K7/VKD 8 622 402 140

Blaupunkt-Werke GmbHBosch Gruppe

Radio / CD

Casablanca CD50

Installation instructionsNotice de montageInstrucciones de instalaciónInstruções de montagem

96

Installation instructions • Notice de montage •Instrucciones de instalación • Instruções de montagem

- La section du câble (+) et (-) nedoit pas dépasser 1,5 mm2.

- En cas d’erreur d’installation, desperturbations peuvent survenirdans les systèmes électroniquesdu véhicule ou dans votreautoradio.

- Ne pas brancher les connecteursdu véhicule sur la radio !

- Les câbles d’adaptationnécessaires pour le type devéhicule sont disponibles auprèsdes revendeurs BLAUPUNKT.

E Normas de seguridad

Durante el montaje y la conexión esimprescindible observar lassiguientes normas de seguridad.- Desemborne el polo negativo de la

batería.Observe las normas de seguridaddadas por el fabricante delvehículo.

- Al perforar agujeros, asegúrese deno dañar ninguna pieza delvehículo.

- La sección transversal del cablepositivo y del cable negativo nodebe ser menor de 1,5 mm2.

- Una instalación incorrecta puedeprovocar perturbaciones en lossistemas electrónicos del vehículoo en la radio.

- ¡No conecte a la radio losconectores ubicados en elvehículo!

GB Safety instructions

When carrying out installation workand making connections pleaseobserve the following safetyinstructions:- Disconnect the negative terminal of

the battery! When doing so, pleaseobserve the vehicle manufacturer’ssafety instructions.

- Make sure you do not damagevehicle components when drillingany holes.

- The cross sections of the positiveand negative cables must not beless than 1.5 mm2.

- Incorrect installation may causeinterference with electronic vehiclesystems or your car radio.

- Do not connect the vehicle’s plugconnectors to the radio!

- You can obtain the adapter cablerequired for your vehicle type fromany BLAUPUNKT dealer.

F Consignes de sécurité

Respecter les consignes de sécuritésuivantes pendant la durée dumontage et du branchement.- Débrancher le pôle (-) de la

batterie ! Respecter les consignesde sécurité du constructeurautomobile !

- Veiller à n’endommager aucunepièce du véhicule en perçant destrous.

97

FR

AN

ÇA

ISE

SPA

ÑO

LP

OR

TUG

UÊ

SE

NG

LIS

H

- Los cables adaptadoresnecesarios para su vehículo losencontrará en el comercioespecializado en artículos de lamarca BLAUPUNKT.

P Instruções de segurança

Durante a montagem e a ligação doaparelho, queira respeitar asseguintes instruções de segurança.- Separar o pólo negativo da bateria!

Respeitar ao mesmo tempo asinstruções de segurança dofabricante do automóvel.

- Quando se procede à furagem deburacos, prestar atenção para nãoserem danificadas quaisquerpartes do veículo.

- As secções transversais dos cabospositivo e negativo não devem serinferiores a 1,5 mm2.

- Se a montagem for executada deforma incorrecta podem ocorreravarias nos sistemas electrónicosdo automóvel ou no seu auto--rádio.

- Não ligar as fichas existentes dolado do automóvel ao auto-rádio!

- Os cabos adaptadores necessáriospara o seu automóvel podem seradquiridos nos revendedores daBLAUPUNKT.

Supplied Mounting HardwareMateriel de montage fourni

Ferretería de montajesuministrada

Elementos de fixaçãofornecidos.

DC

E F

A

B

J

G

H

I

98

8 601 910 002

2

2

1

1B

12V

4.

5.

6.

A

7 607 621 . . .

3.

Car-specific adapter cable which isavailable at your dealer.Câble adaptateur spécifique auvéhicule, disponible dans lecommerce.

1.

2.

12V

CD

53

182165

1-20

A

Adaptador específico del vehículo, elcual se puede adquirir en el comercioespecializado.

Cabo de adaptação específico doautomóvel que pode ser adquirido nocomércio especializado.

Antenna

F E

99

FR

AN

ÇA

ISE

SPA

ÑO

LP

OR

TUG

UÊ

SE

NG

LIS

H

7.

A B

1 Automatic Sound 1 Speaker out RR+2 Radio Mute 2 Speaker out RR-3 Sub out 3 Speaker out RF+4 Permanent +12V 4 Speaker out RF-5 Aut. antenna 5 Speaker out LF+6 Illumination 6 Speaker out LF-7 Kl.15/Ignition 7 Speaker out LR+8 Ground 8 Speaker out LR-

1

2

3

4

5

6

7

8

1

2

3

4

5

6

7

8

C

B

A

1 4 7 10 13 16 19

3 6 9 12 15 18

2 5 8 11 14 17 20

C-1 C-2 C-3

2

D

13 4

5 6

7 8

9

10

D

1 AUX 2- NF L2 AUX 2- NF R3 AUX 2- REF4 NC5 NC6 NC7 NC8 NC9 NC

10 NC

CC1 C2 C3

1 Line Out LR 7 Telefon / Navi NF in + 13 Bus - In2 Line Out RR 8 Telefon / NAvi NF in – 14 Bus - Out3 Line Out Masse / Ground 9 Radio / Navi Mute 15 Permanent +12V4 Line Out LF 10 FB +12V / RC +12V 16 +12V5 Line Out RF 11 Fernbedienung / Remote Control 17 Bus - Masse / GND6 +12V Amplifier 12 FB - Masse / RC - GND 18 AF - Masse / GND

19 Line In - L 20 Line In - R

Equalizer Amplifier

CD-ChangerRemoteControl

100

Radio Mute (low)

+12V(max. 150 mA)

This information is subject to change without notice!Sous réserve de modifications!Modificaciones reservadas!Sob reserva de alterações!

8.

Kl. 15 +12V

G

I

H

Relais

12V

1 3 5 7

2 4 6 8

RR RF LF LR

4 Ohm

4 Ohm4 Ohm

4 Ohm

+-+-+-+-

A