Catalog Reception technology 2018

Perfect technology

for highest demands

Regoort.nl

http://www.wisi.de/

Table of Contents

Multiswitch FLEXSWITCH Multiswitch PROSWITCH

Multiswitch 13 inputs,

cascade

DRC 1308 ............................. 26

DRC 1312 ............................. 27

DRC 1316 ............................. 28

DRC 1324 ............................. 29

DRC 1332 ............................. 30

Multiswitch 17 inputs,

cascade

DRC 1708 ............................. 31

DRC 1712 ............................. 32

DRC 1716 ............................. 33

DRC 1724 ............................. 34

DRC 1732 ............................. 35

Multiswitch 5 inputs, cascade

DRC 0508 ............................... 8

DRC 0512 ............................... 9

DRC 0516 ............................. 10

DRC 0524 ............................. 11

DRC 0532 ............................. 12

Multiswitch 5 inputs, receiver

powered

DRR 0508 ............................. 13

DRR 0516 ............................. 14

Multiswitch 5 inputs, stand

alone

DRS 0516.............................. 15

DRS 0508.............................. 16

DRS 0512.............................. 17

DRS 0524.............................. 18

DRS 0532.............................. 19

Multiswitch 9 inputs, cascade

DRC 0908 ............................. 20

DRC 0912 ............................. 21

DRC 0916 ............................. 22

DRC 0924 ............................. 23

DRC 0932 ............................. 24

Multiswitch 9 inputs, receiver

powered

DRR 0908 ............................. 25

Amplifiers

DRA 0505 .............................. 36

DRA 0909 .............................. 37

DRA 1313 .............................. 38

DRA 1717 .............................. 39

DRA 4132 .............................. 40

DRA 4232 .............................. 41

DRA 8132 .............................. 42

DRA 8232 .............................. 43

Taps/splitter

DRX 5002 .............................. 44

DRX 9002 .............................. 45

Accessories

DRI 0210 ............................... 46

DRP 1533 .............................. 46

Multiswitch 17 inputs,

cascade

DY 1708 ................................ 52

DY 1716 ................................ 53

Multiswitch 5 inputs, cascade

DY 0508 ................................ 48

DY 0516 ................................ 49

Multiswitch 9 inputs, cascade

DY 0908 ................................ 50

DY 0916 ................................ 51

Amplifiers

DY 40 .................................... 54

Accessories

DY 70 .................................... 55

Satellite Receiving

Systems Terrestrial antennas

Parabol offset antennas

OA 10 .................................... 56

OA 10 A .............................. 56

OA 100 G .............................. 57

OA 100 H .............................. 57

OA 100 I ................................ 57

OA 13 A .............................. 58

OA 36 G ................................ 59

OA 36 H ................................ 59

OA 36 I .................................. 59

OA 38 G ................................ 60

OA 38 H ................................ 60

OA 38 I .................................. 60

OA 85 G ................................ 61

OA 85 H ................................ 61

OA 85 I .................................. 61

Feed systems

OC 01 D ................................ 62

OC 02 D ................................ 62

OC 04 D ................................ 62

OC 06 D ................................ 62

Surge protector

DL 400 .................................. 63

Accessories Parabol offset

antennas

OF 85 0002 ......................... 64

OF 85 0004 ......................... 64

UHF antennas

EB 22 0297 ............................ 68

EB 45 LTE .................................... 68

EB 67 LTE .................................... 68

EE 06 0297 ............................ 69

EZ 45 LTE .................................... 69

FM antennas

UA 05 .................................... 70

UE 01 ..................................... 70

VHF-UHF combination

antennas

EA 34 ..................................... 71

Content in alphabetical order

D DRC 1308 ............................. 26

DRC 1312 ............................. 27

DRC 1316 ............................. 28

DRC 1324 ............................. 29

DRC 1332 ............................. 30

DRC 1708 ............................. 31

DRC 1712 ............................. 32

DRC 1716 ............................. 33

DRC 1724 ............................. 34

DRC 1732 ............................. 35

DRC 0508 ............................... 8

DRC 0512 ............................... 9

DRC 0516 ............................. 10

DRC 0524 ............................. 11

DRC 0532 ............................. 12

DRR 0508 ............................. 13

DRR 0516 ............................. 14

DRS 0516.............................. 15

DRS 0508.............................. 16

DRS 0512.............................. 17

DRS 0524.............................. 18

DRS 0532.............................. 19

DRC 0908 ............................. 20

DRC 0912 ............................. 21

DRC 0916 ............................. 22

DRC 0924 ............................. 23

DRC 0932 ............................. 24

DRR 0908 ............................. 25

DRA 0505.............................. 36

DRA 0909.............................. 37

DRA 1313.............................. 38

DRA 1717.............................. 39

DRA 4132.............................. 40

DRA 4232.............................. 41

DRA 8132.............................. 42

DRA 8232.............................. 43

DRX 5002.............................. 44

DRX 9002.............................. 45

DRI 0210 ............................... 46

DRP 1533.............................. 46

DY 1708 ................................ 52

DY 1716 ................................ 53

DY 0508 ................................ 48

DY 0516 ................................ 49

DY 0908 ................................ 50

DY 0916 ................................ 51

DY 40 .................................... 54

DY 70 .................................... 55

DL 400 .................................. 63

E EB 22 0297 ........................... 68

EB 45 LTE ................................... 68

EB 67 LTE ................................... 68

EE 06 0297 ........................... 69

EZ 45 LTE ................................... 69

EA 34 .................................... 71

O OA 10 .................................... 56

OA 10 A ............................... 56

OA 100 G .............................. 57

OA 100 H .............................. 57

OA 100 I ................................ 57

OA 13 A ............................... 58

OA 36 G ................................ 59

OA 36 H ................................ 59

OA 36 I .................................. 59

OA 38 G ................................ 60

OA 38 H ................................ 60

OA 38 I .................................. 60

OA 85 G ................................ 61

OA 85 H ................................ 61

OA 85 I .................................. 61

OC 01 D ................................ 62

OC 02 D ................................ 62

OC 04 D ................................ 62

OC 06 D ................................ 62

OF 85 0002 .......................... 64

OF 85 0004 .......................... 64

U UA 05 .................................... 70

UE 01 .................................... 70

4

5

WISI antennas:

Perfect reception at every weather

Corrosion-resistant

aluminum reflector,

powder-coated

Feed holder made of die cast aluminum

for a discreet installation available in three colours

Reinforced back panel

for more stability

easy mounting

of the reflector thru suspension unit

Cable management

for aesthetic assembly

Satellite

Receiving Systems

Communication defines our everyday life, informs us,

imparts knowledge and experience. It supports our

understanding and helps us solving problems.

WISI‘s highly-motivated staff is fully committed to provide you with the state- of-the-art technology for communication today and tomorrow.

upgradeable with optional multifeed

bar for up to 4 LNBs

WISI TOPLINE antennas are rustproof and completely weatherproof. Due to the excellent material and precise manufacturing, the antennas do not warp even with extreme temperature fluctuations. This guarantees a top picture quality in almost all weather conditions.

Of course WISI TOPLINE antennas are extremely easy to install, highly resilient, durable, recyclable and designed for modern technologies. So simply the best that WISI have to offer in antenna technology.

WISI feed systems can be used with all antennas that have a 40 mm feed mount. They are easy to adjust and also suitable with Duo Feed mounts for the reception of ASTRA and EUTELSAT.

WISI feed systems are characterized by a high linear performance over the complete frequency range. They have a low-noise and are energy-saving. Each WISI feed system gets an final inspcetion in the laboratory - for a long untroubled reception.

The special construction and tie-down weather protection cap provide protection against all weather conditions, even after many years.

Multiswitch 5 inputs, cascade

DRC 0508 FLEXSWITCH multiswitch 5 in 8, cascade, TERR. active

The DRC 0508 is a cascadable multiswitch with five inputs for the

distribution of one satellite and terrestrial signals. The polarisa-

tions are available at five cascade outputs for the installation of

further multiswitches. Commercially available DVB-S/S2 set-top-

boxes or TVs with an integrated receiver can be used at the eight

subscriber outputs. Inserted terrestrial signals like DVB-T/T2,

DAB or FM are available at each subscriber output as well. The

very low insertion loss of the DRC 0508 is realised through an

active terrestrial and satellite path. The LNB can be powered by

previously installed amplifiers, or the available power supply DRP

1533.

Technical data

SAT-IF trunk

Inputs SAT 4 pcs.

Outputs SAT 4 pcs.

Frequency range SAT 950... 2400 MHz

Through loss SAT 1...2 dB

Decoupling SAT -SAT 30 dB typ.

Return loss SAT >10 dB

Technical data

Power consumption max. 10 dB

Subscriber outputs

Outputs 8 pcs.

Frequency range 40…2400 MHz

TERR type active

Insertion loss SAT 3...0 dB

Insertion TERR 0 dB (±3 dB)

Max. output level subscriber SAT 102 dBµV

Max. output level subscriber TERR 84 dBµV

Return loss subscriber SAT >10 dB

Return loss subscriber TERR >10 dB

Control signal 14/18 V, 0/22 kHz

◼ Cascadable multiswitch for the distribution of 4 satellite polarisa-

tions and terrestrial signals

◼ Active terrestrial path to distribute DVB-T/T2, DAB and FM without

an additional amplifier

◼ Integrated SAT amplifier for low insertion loss

◼ Pre-emphasis to compensate the cable loss at high frequencies

◼ High screening efficiency according to Class A

◼ Compact dimensions paired with installation friendly distance bet-

ween the F-connectors

◼ Colour-coded inputs and outputs

◼ Made in Germany

Current consumption from

receiver

35 mA

F-socket 18 pcs.

DC supply voltage Connector type DC 5.5/2.1 mm

Colour-coding VL = black; HL = green; VH = red;

HH = yellow

Power indicator LED

Operating voltage 15 V DC

8 Multiswitch FLEXSWITCH

General data

Connectors

Multiswitch 5 inputs, cascade

DRC 0512 FLEXSWITCH multiswitch 5 in 12, cascade, TERR. active

Technical data

SAT-IF trunk

Inputs SAT 4 pcs.

Outputs SAT 4 pcs.

Frequency range SAT 950... 2400 MHz

Through loss SAT 2...4 dB

Decoupling SAT -SAT 30 dB typ.

Return loss SAT >10 dB

The DRC 0512 is a cascadable multiswitch with five inputs for the

distribution of one satellite and terrestrial signals. The polarisa-

tions are available at five cascade outputs for the installation of

further multiswitches. Commercially available DVB-S/S2 set-top-

boxes or TVs with an integrated receiver can be used at the 12

subscriber outputs. Inserted terrestrial signals like DVB-T/T2,

DAB or FM are available at each subscriber output as well. The

very low insertion loss of the DRC 0512 is realised through an

active terrestrial and satellite path. The LNB can be powered by

previously installed amplifiers, or the available power supply DRP

1533.

Technical data

Power consumption max. 10 dB

Subscriber outputs

Outputs 12 pcs.

Frequency range 40…2400 MHz

TERR type active

Insertion loss SAT 4...1 dB

Insertion TERR 0 dB (±3 dB)

Max. output level subscriber SAT 102 dBµV

Max. output level subscriber TERR 84 dBµV

Return loss subscriber SAT >10 dB

Return loss subscriber TERR >10 dB

Control signal 14/18 V, 0/22 kHz

◼ Cascadable multiswitch for the distribution of 4 satellite polarisa-

tions and terrestrial signals

◼ Active terrestrial path to distribute DVB-T/T2, DAB and FM without

an additional amplifier

◼ Integrated SAT amplifier for low insertion loss

◼ Pre-emphasis to compensate the cable loss at high frequencies

◼ High screening efficiency according to Class A

◼ Compact dimensions paired with installation friendly distance bet-

ween the F-connectors

◼ Colour-coded inputs and outputs

◼ Made in Germany

Current consumption from

receiver

35 mA

F-socket 22 pcs.

DC supply voltage Connector type DC 5.5/2.1 mm

Colour-coding VL = black; HL = green; VH = red;

HH = yellow

Power indicator LED

Operating voltage 15 V DC

Multiswitch FLEXSWITCH 9

General data

Connectors

Multiswitch 5 inputs, cascade

DRC 0516 FLEXSWITCH multiswitch 5 in 16, cascade, TERR. active

Technical data

SAT-IF trunk

Inputs SAT 4 pcs.

Outputs SAT 4 pcs.

Frequency range SAT 950... 2400 MHz

Through loss SAT 2...4 dB

Decoupling SAT -SAT 30 dB typ.

Return loss SAT >10 dB

The DRC 0516 is a cascadable multiswitch with five inputs for the

distribution of one satellite and terrestrial signals. The polarisa-

tions are available at five cascade outputs for the installation of

further multiswitches. Commercially available DVB-S/S2 set-top-

boxes or TVs with an integrated receiver can be used at the 16

subscriber outputs. Inserted terrestrial signals like DVB-T/T2,

DAB or FM are available at each subscriber output as well. The

very low insertion loss of the DRC 0516 is realised through an

active terrestrial and satellite path. The LNB can be powered by

previously installed amplifiers, or the available power supply DRP

1533.

Technical data

Power consumption max. 10 dB

Subscriber outputs

Outputs 16 pcs.

Frequency range 40…2400 MHz

TERR type active

Insertion loss SAT 4...1 dB

Insertion TERR 0 dB (±3 dB)

Max. output level subscriber SAT 102 dBµV

Max. output level subscriber TERR 84 dBµV

Return loss subscriber SAT >10 dB

Return loss subscriber TERR >10 dB

Control signal 14/18 V, 0/22 kHz

◼ Cascadable multiswitch for the distribution of 4 satellite polarisa-

tions and terrestrial signals

◼ Active terrestrial path to distribute DVB-T/T2, DAB and FM without

an additional amplifier

◼ Integrated SAT amplifier for low insertion loss

◼ Pre-emphasis to compensate the cable loss at high frequencies

◼ High screening efficiency according to Class A

◼ Compact dimensions paired with installation friendly distance bet-

ween the F-connectors

◼ Colour-coded inputs and outputs

◼ Made in Germany

Current consumption from

receiver

35 mA

F-socket 26 pcs.

DC supply voltage Connector type DC 5.5/2.1 mm

Colour-coding VL = black; HL = green; VH = red;

HH = yellow

Power indicator LED

Operating voltage 15 V DC

10 Multiswitch FLEXSWITCH

General data

Connectors

Multiswitch 5 inputs, cascade

DRC 0524 FLEXSWITCH multiswitch 5 in 24, cascade, TERR. active

The DRC 0524 is a cascadable multiswitch with five inputs for the

distribution of one satellite and terrestrial signals. The polarisa-

tions are available at five cascade outputs for the installation of

further multiswitches. Commercially available DVB-S/S2 set-top-

boxes or TVs with an integrated receiver can be used at the 24

subscriber outputs. Inserted terrestrial signals like DVB-T/T2,

DAB or FM are available at each subscriber output as well. The

very low insertion loss of the DRC 0524 is realised through an

active terrestrial and satellite path. The LNB can be powered by

previously installed amplifiers, or the available power supply DRP

1533.

Technical data

SAT-IF trunk

Inputs SAT 4 pcs.

Outputs SAT 4 pcs.

Frequency range SAT 950... 2400 MHz

Through loss SAT 2...6 dB

Decoupling SAT -SAT 30 dB typ.

Return loss SAT >10 dB

Technical data

Power consumption max. 10 dB

Subscriber outputs

Outputs 24 pcs.

Frequency range 40…2400 MHz

TERR type active

Insertion loss SAT 6...0 dB

Insertion TERR 2 dB (±2 dB)

Max. output level subscriber SAT 102 dBµV

Max. output level subscriber TERR 91 dBµV

Return loss subscriber SAT >10 dB

Return loss subscriber TERR >10 dB

Control signal 14/18 V, 0/22 kHz

◼ Cascadable multiswitch for the distribution of 4 satellite polarisa-

tions and terrestrial signals

◼ Active terrestrial path to distribute DVB-T/T2, DAB and FM without

an additional amplifier

◼ Integrated SAT amplifier for low insertion loss

◼ Pre-emphasis to compensate the cable loss at high frequencies

◼ High screening efficiency according to Class A

◼ Compact dimensions paired with installation friendly distance bet-

ween the F-connectors

◼ Colour-coded inputs and outputs

◼ Made in Germany

Current consumption from

receiver

35 mA

F-socket 34 pcs.

DC supply voltage Connector type DC 5.5/2.1 mm

Colour-coding VL = black; HL = green; VH = red;

HH = yellow

Power indicator LED

Operating voltage 15 V DC

Multiswitch FLEXSWITCH 11

General data

Connectors

Multiswitch 5 inputs, cascade

DRC 0532 FLEXSWITCH multiswitch 5 in 32, cascade, TERR. active

The DRC 0532 is a cascadable multiswitch with five inputs for the

distribution of one satellite and terrestrial signals. The polarisa-

tions are available at five cascade outputs for the installation of

further multiswitches. Commercially available DVB-S/S2 set-top-

boxes or TVs with an integrated receiver can be used at the 32

subscriber outputs. Inserted terrestrial signals like DVB-T/T2,

DAB or FM are available at each subscriber output as well. The

very low insertion loss of the DRC 0532 is realised through an

active terrestrial and satellite path. The LNB can be powered by

previously installed amplifiers, or the available power supply DRP

1533.

Technical data

SAT-IF trunk

Inputs SAT 4 pcs.

Outputs SAT 4 pcs.

Frequency range SAT 950... 2400 MHz

Through loss SAT 2...6 dB

Decoupling SAT -SAT 30 dB typ.

Return loss SAT >10 dB

Technical data

Power consumption max. 10 dB

Subscriber outputs

Outputs 32 pcs.

Frequency range 40…2400 MHz

TERR type active

Insertion loss SAT 6...0 dB

Insertion TERR 2 dB (±2 dB)

Max. output level subscriber SAT 102 dBµV

Max. output level subscriber TERR 91 dBµV

Return loss subscriber SAT >10 dB

Return loss subscriber TERR >10 dB

Control signal 14/18 V, 0/22 kHz

◼ Cascadable multiswitch for the distribution of 4 satellite polarisa-

tions and terrestrial signals

◼ Active terrestrial path to distribute DVB-T/T2, DAB and FM without

an additional amplifier

◼ Integrated SAT amplifier for low insertion loss

◼ Pre-emphasis to compensate the cable loss at high frequencies

◼ High screening efficiency according to Class A

◼ Compact dimensions paired with installation friendly distance bet-

ween the F-connectors

◼ Colour-coded inputs and outputs

◼ Made in Germany

Current consumption from

receiver

35 mA

F-socket 42 pcs.

DC supply voltage Connector type DC 5.5/2.1 mm

Colour-coding VL = black; HL = green; VH = red;

HH = yellow

Power indicator LED

Operating voltage 15 V DC

12 Multiswitch FLEXSWITCH

General data

Connectors

Multiswitch 5 inputs, receiver powered

Technical data

DRR 0508 FLEXSWITCH multiswitch, receiver power, 5 in 8

The DRR 0508 is a receiver powered multiswitch with five inputs

for the distribution of one satellite and terrestrial signals. Com-

mercially available DVB-S/S2 set-top-boxes or TVs with an integra-

ted receiver can be used at the eight subscriber outputs. Inserted

terrestrial signals like DVB-T/T2, DAB or FM are available at each

subscriber output as well. The very low insertion loss of the DRR

0508 is realised through an active satellite path. Through the

passive terrestrial path, it is possible to feed in multimedia services

like “LAN over Coax” or signals from a headend system. The LNB

is powered by the switching voltage of the connected receivers

and an additional power supply is not required, which reduces

the operating costs.

Weight 0.24 kg

Inputs SAT 4 pcs.

Frequency range SAT 950... 2400 MHz

Decoupling SAT -SAT 30 dB typ.

Return loss SAT >10 dB

Terrestrial trunk

Dimensions (width x height x

depth)

characteristics

130 x 110 x 45 mm

Inputs TERR 1 pcs.

Frequency range TERR 5... 862 MHz

Isolation TERR - SAT 30 dB typ.

Return loss TERR >10 dB

Subscriber outputs

Outputs 8 pcs.

Frequency range 5...2400 MHz

TERR type Passive

Insertion loss SAT 0...-5 dB

Insertion TERR 18 dB (±2 dB)

Max. output level subscriber SAT 102 dBµV

Max. output level subscriber TERR 50...110 dBµV (passive)

Return loss subscriber SAT >10 dB

Return loss subscriber TERR >10 dB

Control signal 14/18 V, 0/22 kHz

◼ Receiver powered multiswitch for the distribution of 4 satellite pola-

risations and terrestrial signals

◼ Power supply-free usage

◼ Passive terrestrial path

◼ Integrated SAT amplifier for low insertion loss

◼ Pre-emphasis to compensate the cable loss at high frequencies

◼ High screening efficiency according to Class A

◼ Compact dimensions paired with installation friendly distance bet-

ween the F-connectors

◼ Colour-coded inputs

◼ Made in Germany

Current consumption from

receiver

30 mA

F-socket 13 pcs.

DC supply voltage Connector type DC 5.5/2.1 mm

Colour-coding VL = black; HL = green; VH = red;

HH = yellow

Power indicator LED

Operating voltage receiver powered

Power consumption max.

Multiswitch 5 inputs, receiver powered

DRR 0516 FLEXSWITCH multiswitch, receiver power, 5 in 16

The DRR 0516 is a receiver powered multiswitch with five inputs

for the distribution of one satellite and terrestrial signals. Com-

mercially available DVB-S/S2 set-top-boxes or TVs with an integ-

rated receiver can be used at the 16 subscriber outputs. Inserted

terrestrial signals like DVB-T/T2, DAB or FM are available at each

subscriber output as well. The very low insertion loss of the DRR

0516 is realised through an active satellite path. Through the

passive terrestrial path, it is possible to feed in multimedia services

like “LAN over Coax” or signals from a headend system. The LNB

is powered by the switching voltage of the connected receivers

and an additional power supply is not required, which reduces

the operating costs.

Weight 0.4 kg

Inputs SAT 4 pcs.

Frequency range SAT 950... 2400 MHz

Decoupling SAT -SAT 30 dB typ.

Return loss SAT >10 dB

Terrestrial trunk

Dimensions (width x height x

depth)

characteristics

215 x 110 x 45 mm

Inputs TERR 1 pcs.

Frequency range TERR 5... 862 MHz

Isolation TERR - SAT 30 dB typ.

Return loss TERR >10 dB

Subscriber outputs

Outputs 16 pcs.

Frequency range 5...2400 MHz

TERR type Passive

Insertion loss SAT 1...-4 dB

Insertion TERR 24 dB (±3 dB)

Max. output level subscriber SAT 102 dBµV

Max. output level subscriber TERR 50...110 dBµV (passive)

Return loss subscriber SAT >10 dB

Return loss subscriber TERR >10 dB

Control signal 14/18 V, 0/22 kHz

◼ Receiver powered multiswitch for the distribution of 4 satellite pola-

risations and terrestrial signals

◼ Power supply-free usage

◼ Passive terrestrial path

◼ Integrated SAT amplifier for low insertion loss

◼ Pre-emphasis to compensate the cable loss at high frequencies

◼ High screening efficiency according to Class A

◼ Compact dimensions paired with installation friendly distance bet-

ween the F-connectors

◼ Colour-coded inputs

◼ Made in Germany

Current consumption from

receiver

30 mA

F-socket 21 pcs.

DC supply voltage Connector type DC 5.5/2.1 mm

Colour-coding VL = black; HL = green; VH = red;

HH = yellow

Power indicator LED

Operating voltage receiver powered

Power consumption max.

Multiswitch 5 inputs, stand alone

DRS 0516 FLEXSWITCH multiswitch 5 in 16, stand alone

The DRS 0516 is a stand alone multiswitch with five inputs for

the distribution of one satellite and terrestrial signals. The stand

alone device is equipped with an integrated power supply which

ensures the LNB powering. Additionally integrated is a 22 KHz

generator which allows the usage of Quad-LNBs. Commercially

available DVB-S/S2 set-top-boxes or TVs with an integrated recei-

ver can be used at the 16 subscriber outputs. Inserted terrestrial

signals like DVB-T/T2, DAB or FM are available at each subscriber

output as well. The very low insertion loss of the DRS 0516 is

realised through an active terrestrial and satellite path.

Technical data

SAT-IF trunk

Inputs SAT 4 pcs.

Frequency range SAT 950... 2400 MHz

Technical data

Impedance 75

Operating temperature range 0...+55 °C

Weight 0.64 kg

Decoupling SAT -SAT 30 dB typ.

Return loss SAT >10 dB

Terrestrial trunk

Inputs TERR 1 pcs.

Frequency range TERR 40... 862 MHz

Dimensions (width x height x

depth)

characteristics

310 x 110 x 57 mm

Isolation TERR - SAT 30 dB typ.

Return loss TERR >10 dB

Subscriber outputs

Outputs 16 pcs.

Frequency range 40…2400 MHz

TERR type active

Insertion loss SAT 1...-4 dB

Insertion TERR 2 dB (±2 dB)

Max. output level subscriber SAT 102 dBµV

Max. output level subscriber TERR 84 dBµV

Return loss subscriber SAT >10 dB

Return loss subscriber TERR >10 dB

Control signal 14/18 V, 0/22 kHz

◼ Stand alone multiswitch for the distribution of 4 satellite polarisa-

tions and terrestrial signals

◼ Quad-LNB support

◼ Active terrestrial path to distribute DVB-T/T2, DAB and FM without

an additional amplifier

◼ Integrated SAT amplifier for low insertion loss

◼ Pre-emphasis to compensate the cable loss at high frequencies

◼ High screening efficiency according to Class A

◼ Compact dimensions paired with installation friendly distance bet-

ween the F-connectors

◼ Colour-coded inputs

◼ Made in Germany

Current consumption from

receiver

30 mA

F-socket 21 pcs.

Colour-coding VL = black; HL = green; VH = red;

HH = yellow

General data

Power indicator LED

Quad LNB support Yes

LNB supply voltage 14 V/18 V (22 kHz)

Current consumption LNB max. 500 mA

Operating voltage 90...264 V AC, 50/60 Hz

Power consumption max. 5.5 W typ.

Screening factor Class A, according to EN 50083-2

Multiswitch FLEXSWITCH 15

Connectors

Multiswitch 5 inputs, stand alone

DRS 0508 FLEXSWITCH multiswitch 5 in 8, stand alone

Technical data

SAT-IF trunk

Inputs SAT 4 pcs.

Frequency range SAT 950... 2400 MHz

The DRS 0508 is a stand alone multiswitch with five inputs for the

distribution of one satellite and terrestrial signals. The stand alone

device is equipped with an integrated power supply which ensu-

res the LNB powering. Additionally integrated is a 22 KHz genera-

tor which allows the usage of Quad-LNBs. Commercially available

DVB-S/S2 set-top-boxes or TVs with an integrated receiver can be

used at the eight subscriber outputs. Inserted terrestrial signals

like DVB-T/T2, DAB or FM are available at each subscriber output

as well. The very low insertion loss of the DRS 0508 is realised

through an active terrestrial and satellite path.

Technical data

Impedance 75

Operating temperature range 0...+55 °C

Weight 0.46 kg

Decoupling SAT -SAT 30 dB typ.

Return loss SAT >10 dB

Terrestrial trunk

Inputs TERR 1 pcs.

Frequency range TERR 40... 862 MHz

Dimensions (width x height x

depth)

characteristics

222 x 110 x 57 mm

Isolation TERR - SAT 30 dB typ.

Return loss TERR >10 dB

Subscriber outputs

Outputs 8 pcs.

Frequency range 40…2400 MHz

TERR type active

Insertion loss SAT 0...-5 dB

Insertion TERR 2 dB (±2 dB)

Max. output level subscriber SAT 102 dBµV

Max. output level subscriber TERR 90 dBµV

Return loss subscriber SAT >10 dB

Return loss subscriber TERR >10 dB

Control signal 14/18 V, 0/22 kHz

◼ Stand alone multiswitch for the distribution of 4 satellite polarisa-

tions and terrestrial signals

◼ Quad-LNB support

◼ Active terrestrial path to distribute DVB-T/T2, DAB and FM without

an additional amplifier

◼ Integrated SAT amplifier for low insertion loss

◼ Pre-emphasis to compensate the cable loss at high frequencies

◼ High screening efficiency according to Class A

◼ Compact dimensions paired with installation friendly distance bet-

ween the F-connectors

◼ Colour-coded inputs

◼ Made in Germany

Current consumption from

receiver

30 mA

F-socket 13 pcs.

Colour-coding VL = black; HL = green; VH = red;

HH = yellow

General data

Power indicator LED

Quad LNB support Yes

LNB supply voltage 14 V/18 V (22 kHz)

Current consumption LNB max. 500 mA

Operating voltage 90...264 V AC, 50/60 Hz

Power consumption max. 5.5 W typ.

Screening factor Class A, according to EN 50083-2

16 Multiswitch FLEXSWITCH

Connectors

Multiswitch 5 inputs, stand alone

DRS 0512 FLEXSWITCH multiswitch 5 in 12, stand alone

The DRS 0512 is a stand alone multiswitch with five inputs for

the distribution of one satellite and terrestrial signals. The stand

alone device is equipped with an integrated power supply which

ensures the LNB powering. Additionally integrated is a 22 KHz

generator which allows the usage of Quad-LNBs. Commercially

available DVB-S/S2 set-top-boxes or TVs with an integrated recei-

ver can be used at the 12 subscriber outputs. Inserted terrestrial

signals like DVB-T/T2, DAB or FM are available at each subscriber

output as well. The very low insertion loss of the DRS 0512 is

realised through an active terrestrial and satellite path.

Technical data

SAT-IF trunk

Inputs SAT 4 pcs.

Frequency range SAT 950... 2400 MHz

Technical data

Impedance 75

Operating temperature range 0...+55 °C

Weight 0.62 kg

Decoupling SAT -SAT 30 dB typ.

Return loss SAT >10 dB

Terrestrial trunk

Inputs TERR 1 pcs.

Frequency range TERR 40... 862 MHz

Dimensions (width x height x

depth)

characteristics

310 x 110 x 57 mm

Isolation TERR - SAT 30 dB typ.

Return loss TERR >10 dB

Subscriber outputs

Outputs 12 pcs.

Frequency range 40…2400 MHz

TERR type active

Insertion loss SAT 1...-4 dB

Insertion TERR 2 dB (±2 dB)

Max. output level subscriber SAT 102 dBµV

Max. output level subscriber TERR 84 dBµV

Return loss subscriber SAT >10 dB

Return loss subscriber TERR >10 dB

Control signal 14/18 V, 0/22 kHz

◼ Stand alone multiswitch for the distribution of 4 satellite polarisa-

tions and terrestrial signals

◼ Quad-LNB support

◼ Active terrestrial path to distribute DVB-T/T2, DAB and FM without

an additional amplifier

◼ Integrated SAT amplifier for low insertion loss

◼ Pre-emphasis to compensate the cable loss at high frequencies

◼ High screening efficiency according to Class A

◼ Compact dimensions paired with installation friendly distance bet-

ween the F-connectors

◼ Colour-coded inputs

◼ Made in Germany

Current consumption from

receiver

30 mA

F-socket 17 pcs.

Colour-coding VL = black; HL = green; VH = red;

HH = yellow

General data

Power indicator LED

Quad LNB support Yes

LNB supply voltage 14 V/18 V (22 kHz)

Current consumption LNB max. 500 mA

Operating voltage 90...264 V AC, 50/60 Hz

Power consumption max. 5.5 W typ.

Screening factor Class A, according to EN 50083-2

Multiswitch FLEXSWITCH 17

Connectors

Multiswitch 5 inputs, stand alone

DRS 0524 FLEXSWITCH multiswitch 5 in 24, stand alone

Technical data

SAT-IF trunk

Inputs SAT 4 pcs.

Frequency range SAT 950... 2400 MHz

The DRS 0524 is a stand alone multiswitch with five inputs for

the distribution of one satellite and terrestrial signals. The stand

alone device is equipped with an integrated power supply which

ensures the LNB powering. Additionally integrated is a 22 KHz

generator which allows the usage of Quad-LNBs. Commercially

available DVB-S/S2 set-top-boxes or TVs with an integrated recei-

ver can be used at the 24 subscriber outputs. Inserted terrestrial

signals like DVB-T/T2, DAB or FM are available at each subscriber

output as well. The very low insertion loss of the DRS 0524 is

realised through an active terrestrial and satellite path.

Technical data

Impedance 75

Operating temperature range 0...+55 °C

Weight 0.86 kg

Decoupling SAT -SAT 30 dB typ.

Return loss SAT >10 dB

Terrestrial trunk

Inputs TERR 1 pcs.

Frequency range TERR 40... 862 MHz

Dimensions (width x height x

depth)

characteristics

324 x 140 x 63 mm

Isolation TERR - SAT 30 dB typ.

Return loss TERR >10 dB

Subscriber outputs

Outputs 24 pcs.

Frequency range 40…2400 MHz

TERR type active

Insertion loss SAT 5...0 dB

Insertion TERR 2 dB (±2 dB)

Max. output level subscriber SAT 102 dBµV

Max. output level subscriber TERR 84 dBµV

Return loss subscriber SAT >10 dB

Return loss subscriber TERR >10 dB

Control signal 14/18 V, 0/22 kHz

◼ Stand alone multiswitch for the distribution of 4 satellite polarisa-

tions and terrestrial signals

◼ Quad-LNB support

◼ Active terrestrial path to distribute DVB-T/T2, DAB and FM without

an additional amplifier

◼ Integrated SAT amplifier for low insertion loss

◼ Pre-emphasis to compensate the cable loss at high frequencies

◼ High screening efficiency according to Class A

◼ Compact dimensions paired with installation friendly distance bet-

ween the F-connectors

◼ Colour-coded inputs

◼ Made in Germany

Current consumption from

receiver

30 mA

F-socket 29 pcs.

Colour-coding VL = black; HL = green; VH = red;

HH = yellow

General data

Power indicator LED

Quad LNB support Yes

LNB supply voltage 14 V/18 V (22 kHz)

Current consumption LNB max. 500 mA

Operating voltage 90...264 V AC, 50/60 Hz

Power consumption max. 7 W typ.

Screening factor Class A, according to EN 50083-2

18 Multiswitch FLEXSWITCH

Connectors

Multiswitch 5 inputs, stand alone

DRS 0532 FLEXSWITCH multiswitch 5 in 32, stand alone

Technical data

SAT-IF trunk

Inputs SAT 4 pcs.

Frequency range SAT 950... 2400 MHz

The DRS 0532 is a stand alone multiswitch with five inputs for

the distribution of one satellite and terrestrial signals. The stand

alone device is equipped with an integrated power supply which

ensures the LNB powering. Additionally integrated is a 22 KHz

generator which allows the usage of Quad-LNBs. Commercially

available DVB-S/S2 set-top-boxes or TVs with an integrated recei-

ver can be used at the 32 subscriber outputs. Inserted terrestrial

signals like DVB-T/T2, DAB or FM are available at each subscriber

output as well. The very low insertion loss of the DRS 0532 is

realised through an active terrestrial and satellite path.

Technical data

Impedance 75

Operating temperature range 0...+55 °C

Weight 0.9 kg

Decoupling SAT -SAT 30 dB typ.

Return loss SAT >10 dB

Terrestrial trunk

Inputs TERR 1 pcs.

Frequency range TERR 40... 862 MHz

Dimensions (width x height x

depth)

characteristics

324 x 140 x 63 mm

Isolation TERR - SAT 30 dB typ.

Return loss TERR >10 dB

Subscriber outputs

Outputs 32 pcs.

Frequency range 40…2400 MHz

TERR type active

Insertion loss SAT 5...0 dB

Insertion TERR 2 dB (±2 dB)

Max. output level subscriber SAT 102 dBµV

Max. output level subscriber TERR 84 dBµV

Return loss subscriber SAT >10 dB

Return loss subscriber TERR >10 dB

Control signal 14/18 V, 0/22 kHz

◼ Stand alone multiswitch for the distribution of 4 satellite polarisa-

tions and terrestrial signals

◼ Quad-LNB support

◼ Active terrestrial path to distribute DVB-T/T2, DAB and FM without

an additional amplifier

◼ Integrated SAT amplifier for low insertion loss

◼ Pre-emphasis to compensate the cable loss at high frequencies

◼ High screening efficiency according to Class A

◼ Compact dimensions paired with installation friendly distance bet-

ween the F-connectors

◼ Colour-coded inputs

◼ Made in Germany

Current consumption from

receiver

30 mA

F-socket 37 pcs.

Colour-coding VL = black; HL = green; VH = red;

HH = yellow

General data

Power indicator LED

Quad LNB support Yes

LNB supply voltage 14 V/18 V (22 kHz)

Current consumption LNB max. 500 mA

Operating voltage 90...264 V AC, 50/60 Hz

Power consumption max. 7 W typ.

Screening factor Class A, according to EN 50083-2

Multiswitch FLEXSWITCH 19

Connectors

Multiswitch 9 inputs, cascade

DRC 0908 FLEXSWITCH multiswitch 9 in 8, cascade, TERR. passive

The DRC 0908 is a cascadable multiswitch with nine inputs for

the distribution of two satellites and terrestrial signals. The polari-

sations are available at nine cascade outputs for the installation of

further multiswitches. Commercially available DVB-S/S2 set-top-

boxes or TVs with an integrated receiver can be used at the eight

subscriber outputs. Inserted terrestrial signals like DVB-T/T2, DAB

or FM are available at each subscriber output as well. The very

low insertion loss of the DRC 0908 is realised through an active

satellite path. Through the passive terrestrial path it is possible to

feed in multimedia services like “LAN over Coax”, or signals from

a central headend system. The LNBs can be powered by previous-

ly installed amplifiers, or the available power supply DRP 1533.

Technical data

SAT-IF trunk

Inputs SAT 8 pcs.

Outputs SAT 8 pcs.

Frequency range SAT 950...2400 MHz

Through loss SAT 1 dB (±1 dB)

Decoupling SAT -SAT 30 dB typ.

Return loss SAT >10 dB

Technical data

Power consumption max. 10 dB

Subscriber outputs

Outputs 8 pcs.

Frequency range 5...2400 MHz

TERR type Passive

Insertion loss SAT 0...-2 dB

Insertion TERR 24 dB (±2 dB)

Max. output level subscriber SAT 102 dBµV

Max. output level subscriber TERR 50...110 dBµV (passive)

Return loss subscriber SAT >10 dB

Return loss subscriber TERR >10 dB

Control signal 14/18 V, 0/22 kHz, DiSEqC 1.0

◼ Cascadable multiswitch for the distribution of 8 satellite polarisa-

tions and terrestrial signals

◼ Passive terrestrial path

◼ Integrated SAT amplifier for low insertion loss

◼ Pre-emphasis to compensate the cable loss at high frequencies

◼ Terrestrial signals available at the receiver without any power supply

of the multiswitch

◼ High screening efficiency according to Class A

◼ Compact dimensions paired with installation friendly distance bet-

ween the F-connectors

◼ Colour-coded inputs and outputs

◼ Made in Germany

Current consumption from

receiver

45 mA

F-socket 17 pcs.

DC supply voltage Connector type DC 5.5/2.1 mm

Colour-coding VL = black; HL = green; VH = red;

HH = yellow

Power indicator LED

Operating voltage 15 V DC

20 Multiswitch FLEXSWITCH

General data

Connectors

Multiswitch 9 inputs, cascade

DRC 0912 FLEXSWITCH multiswitch 9 in 12, cascade, TERR. passive

The DRC 0912 is a cascadable multiswitch with nine inputs for

the distribution of two satellites and terrestrial signals. The polari-

sations are available at nine cascade outputs for the installation of

further multiswitches. Commercially available DVB-S/S2 set-top-

boxes or TVs with an integrated receiver can be used at the 12

subscriber outputs. Inserted terrestrial signals like DVB-T/T2, DAB

or FM are available at each subscriber output as well. The very

low insertion loss of the DRC 0912 is realised through an active

satellite path. Through the passive terrestrial path it is possible to

feed in multimedia services like “LAN over Coax”, or signals from

a central headend system. The LNBs can be powered by previous-

ly installed amplifiers, or the available power supply DRP 1533.

Technical data

SAT-IF trunk

Inputs SAT 8 pcs.

Outputs SAT 8 pcs.

Frequency range SAT 950...2400 MHz

Through loss SAT 1...3 dB (±2 dB)

Decoupling SAT -SAT 30 dB typ.

Return loss SAT >10 dB

Technical data

Power consumption max. 10 dB

Subscriber outputs

Outputs 12 pcs.

Frequency range 5...2400 MHz

TERR type Passive

Insertion loss SAT 2...0 dB

Insertion TERR 28 dB (±3 dB)

Max. output level subscriber SAT 102 dBµV

Max. output level subscriber TERR 50...110 dBµV (passive)

Return loss subscriber SAT >10 dB

Return loss subscriber TERR >10 dB

Control signal 14/18 V, 0/22 kHz, DiSEqC 1.0

◼ Cascadable multiswitch for the distribution of 8 satellite polarisa-

tions and terrestrial signals

◼ Passive terrestrial path

◼ Integrated SAT amplifier for low insertion loss

◼ Pre-emphasis to compensate the cable loss at high frequencies

◼ Terrestrial signals available at the receiver without any power supply

of the multiswitch

◼ High screening efficiency according to Class A

◼ Compact dimensions paired with installation friendly distance bet-

ween the F-connectors

◼ Colour-coded inputs and outputs

◼ Made in Germany

Current consumption from

receiver

45 mA

F-socket 21 pcs.

DC supply voltage Connector type DC 5.5/2.1 mm

Colour-coding VL = black; HL = green; VH = red;

HH = yellow

Power indicator LED

Operating voltage 15 V DC

Multiswitch FLEXSWITCH 21

General data

Connectors

Multiswitch 9 inputs, cascade

DRC 0916 FLEXSWITCH multiswitch 9 in 16, cascade, TERR. passive

The DRC 0916 is a cascadable multiswitch with nine inputs for

the distribution of two satellites and terrestrial signals. The polari-

sations are available at nine cascade outputs for the installation of

further multiswitches. Commercially available DVB-S/S2 set-top-

boxes or TVs with an integrated receiver can be used at the 16

subscriber outputs. Inserted terrestrial signals like DVB-T/T2, DAB

or FM are available at each subscriber output as well. The very

low insertion loss of the DRC 0916 is realised through an active

satellite path. Through the passive terrestrial path it is possible to

feed in multimedia services like “LAN over Coax”, or signals from

a central headend system. The LNBs can be powered by previous-

ly installed amplifiers, or the available power supply DRP 1533.

Technical data

SAT-IF trunk

Inputs SAT 8 pcs.

Outputs SAT 8 pcs.

Frequency range SAT 950...2400 MHz

Through loss SAT 4 dB (±2 dB)

Decoupling SAT -SAT 30 dB typ.

Return loss SAT >10 dB

Technical data

Power consumption max. 10 dB

Subscriber outputs

Outputs 16 pcs.

Frequency range 5...2400 MHz

TERR type Passive

Insertion loss SAT 2...0 dB

Insertion TERR 28 dB (±3 dB)

Max. output level subscriber SAT 102 dBµV

Max. output level subscriber TERR 50...110 dBµV (passive)

Return loss subscriber SAT >10 dB

Return loss subscriber TERR >10 dB

Control signal 14/18 V, 0/22 kHz, DiSEqC 1.0

◼ Cascadable multiswitch for the distribution of 8 satellite polarisa-

tions and terrestrial signals

◼ Passive terrestrial path

◼ Integrated SAT amplifier for low insertion loss

◼ Pre-emphasis to compensate the cable loss at high frequencies

◼ Terrestrial signals available at the receiver without any power supply

of the multiswitch

◼ High screening efficiency according to Class A

◼ Compact dimensions paired with installation friendly distance bet-

ween the F-connectors

◼ Colour-coded inputs and outputs

◼ Made in Germany

Current consumption from

receiver

45 mA

F-socket 25 pcs.

DC supply voltage Connector type DC 5.5/2.1 mm

Colour-coding VL = black; HL = green; VH = red;

HH = yellow

Power indicator LED

Operating voltage 15 V DC

22 Multiswitch FLEXSWITCH

General data

Connectors

Multiswitch 9 inputs, cascade

DRC 0924 FLEXSWITCH multiswitch 9 in 24, cascade, TERR. passive

The DRC 0924 is a cascadable multiswitch with nine inputs for

the distribution of two satellites and terrestrial signals. The polari-

sations are available at nine cascade outputs for the installation of

further multiswitches. Commercially available DVB-S/S2 set-top-

boxes or TVs with an integrated receiver can be used at the 24

subscriber outputs. Inserted terrestrial signals like DVB-T/T2, DAB

or FM are available at each subscriber output as well. The very

low insertion loss of the DRC 0924 is realised through an active

satellite path. Through the passive terrestrial path it is possible to

feed in multimedia services like “LAN over Coax”, or signals from

a central headend system. The LNBs can be powered by previous-

ly installed amplifiers, or the available power supply DRP 1533.

Technical data

SAT-IF trunk

Inputs SAT 8 pcs.

Outputs SAT 8 pcs.

Frequency range SAT 950... 2400 MHz

Through loss SAT 2...4 dB

Decoupling SAT -SAT 30 dB typ.

Return loss SAT >10 dB

Technical data

Power consumption max. 10 dB

Subscriber outputs

Outputs 24 pcs.

Frequency range 5…2400 MHz

TERR type Passive

Insertion loss SAT 2...0 dB

Insertion TERR 33 dB (±3 dB)

Max. output level subscriber SAT 102 dBµV

Max. output level subscriber TERR 50...110 dBµV (passive)

Return loss subscriber SAT >10 dB

Return loss subscriber TERR >10 dB

Control signal 14/18 V, 0/22 kHz, DiSEqC 1.0

◼ Cascadable multiswitch for the distribution of 8 satellite polarisa-

tions and terrestrial signals

◼ Passive terrestrial path

◼ Integrated SAT amplifier for low insertion loss

◼ Pre-emphasis to compensate the cable loss at high frequencies

◼ Terrestrial signals available at the receiver without any power supply

of the multiswitch

◼ High screening efficiency according to Class A

◼ Compact dimensions paired with installation friendly distance bet-

ween the F-connectors

◼ Colour-coded inputs and outputs

◼ Made in Germany

Current consumption from

receiver

45 mA

F-socket 33 pcs.

DC supply voltage Connector type DC 5.5/2.1 mm

Colour-coding VL = black; HL = green; VH = red;

HH = yellow

Power indicator LED

Operating voltage 15 V DC

Multiswitch FLEXSWITCH 23

General data

Connectors

Multiswitch 9 inputs, cascade

DRC 0932 FLEXSWITCH multiswitch 9 in 32, cascade, TERR. passive

The DRC 0932 is a cascadable multiswitch with nine inputs for

the distribution of two satellites and terrestrial signals. The polari-

sations are available at nine cascade outputs for the installation of

further multiswitches. Commercially available DVB-S/S2 set-top-

boxes or TVs with an integrated receiver can be used at the 32

subscriber outputs. Inserted terrestrial signals like DVB-T/T2, DAB

or FM are available at each subscriber output as well. The very

low insertion loss of the DRC 0932 is realised through an active

satellite path. Through the passive terrestrial path it is possible to

feed in multimedia services like “LAN over Coax”, or signals from

a central headend system. The LNBs can be powered by previous-

ly installed amplifiers, or the available power supply DRP 1533.

Technical data

SAT-IF trunk

Inputs SAT 8 pcs.

Outputs SAT 8 pcs.

Frequency range SAT 950... 2400 MHz

Through loss SAT 2...4 dB

Decoupling SAT -SAT 30 dB typ.

Return loss SAT >10 dB

Technical data

Power consumption max. 10 dB

Subscriber outputs

Outputs 32 pcs.

Frequency range 5…2400 MHz

TERR type Passive

Insertion loss SAT 2...0 dB

Insertion TERR 32 dB (±3 dB)

Max. output level subscriber SAT 102 dBµV

Max. output level subscriber TERR 50...110 dBµV (passive)

Return loss subscriber SAT >10 dB

Return loss subscriber TERR >10 dB

Control signal 14/18 V, 0/22 kHz, DiSEqC 1.0

◼ Cascadable multiswitch for the distribution of 8 satellite polarisa-

tions and terrestrial signals

◼ Passive terrestrial path

◼ Integrated SAT amplifier for low insertion loss

◼ Pre-emphasis to compensate the cable loss at high frequencies

◼ Terrestrial signals available at the receiver without any power supply

of the multiswitch

◼ High screening efficiency according to Class A

◼ Compact dimensions paired with installation friendly distance bet-

ween the F-connectors

◼ Colour-coded inputs and outputs

◼ Made in Germany

Current consumption from

receiver

45 mA

F-socket 41 pcs.

DC supply voltage Connector type DC 5.5/2.1 mm

Colour-coding VL = black; HL = green; VH = red;

HH = yellow

Power indicator LED

Operating voltage 15 V DC

24 Multiswitch FLEXSWITCH

General data

Connectors

Multiswitch 9 inputs, receiver powered

DRR 0908 FLEXSWITCH multiswitch, receiver power, 9 in 8

The DRR 0908 is a receiver powered multiswitch with nine

inputs for the distribution of two satellite and terrestrial signals.

Commercially available DVB-S/S2 set-top-boxes or TVs with an

integrated receiver can be used at the eight subscriber outputs.

Inserted terrestrial signals like DVB-T/T2, DAB or FM are available

at each subscriber output as well. The very low insertion loss of

the DRR 0508 is realised through an active satellite path. Through

the passive terrestrial path, it is possible to feed in multimedia

services like “LAN over Coax” or signals from a headend system.

The LNB is powered by the switching voltage of the connected

receivers and an additional power supply is not required, which

reduces the operating costs.

Weight 0.48 kg

Inputs SAT 8 pcs.

Frequency range SAT 950... 2400 MHz

Decoupling SAT -SAT 30 dB typ.

Return loss SAT >10 dB

Terrestrial trunk

Dimensions (width x height x

depth)

characteristics

230 x 110 x 63 mm

Inputs TERR 1 pcs.

Frequency range TERR 5... 862 MHz

Isolation TERR - SAT 30 dB typ.

Return loss TERR >10 dB

Subscriber outputs

Outputs 8 pcs.

Frequency range 5...2400 MHz

TERR type Passive

Insertion loss SAT 4...-2 dB

Insertion TERR 15 dB (±3 dB)

Max. output level subscriber SAT 102 dBµV

Max. output level subscriber TERR 50...110 dBµV (passive)

Return loss subscriber SAT >10 dB

Return loss subscriber TERR >10 dB

Control signal 14/18 V, 0/22 kHz, DiSEqC 1.0

◼ Receiver powered multiswitch for the distribution of 8 satellite pola-

risations and terrestrial signals

◼ Power supply-free usage

◼ Passive terrestrial path

◼ Integrated SAT amplifier for low insertion loss

◼ Pre-emphasis to compensate the cable loss at high frequencies

◼ Terrestrial signals available at the receiver without any power supply

of the multiswitch

◼ High screening efficiency according to Class A

◼ Compact dimensions paired with installation friendly distance bet-

ween the F-connectors

◼ Colour-coded inputs

◼ Made in Germany

Current consumption from

receiver

56 mA

F-socket 17 pcs.

DC supply voltage Connector type DC 5.5/2.1 mm

Colour-coding VL = black; HL = green; VH = red;

HH = yellow

Power indicator LED

Operating voltage receiver powered

Power consumption max.

Multiswitch 13 inputs, cascade

DRC 1308 FLEXSWITCH multiswitch 13 in 8, cascade, TERR. passive

The DRC 1308 is a cascadable multiswitch with 13 inputs for the

distribution of three satellites and terrestrial signals. The polari-

sations are available at 13 cascade outputs for the installation of

further multiswitches. Commercially available DVB-S/S2 set-top-

boxes or TVs with an integrated receiver can be used at the eight

subscriber outputs. Inserted terrestrial signals like DVB-T/T2, DAB

or FM are available at each subscriber output as well. The very

low insertion loss of the DRC 1308 is realised through an active

satellite path. Through the passive terrestrial path it is possible to

feed in multimedia services like “LAN over Coax”, or signals from

a central headend system. The LNBs can be powered by previous-

ly installed amplifiers, or the available power supply DRP 1533.

Technical data

SAT-IF trunk

Inputs SAT 12 pcs.

Outputs SAT 12 pcs.

Frequency range SAT 950... 2400 MHz

Through loss SAT 1...2 dB

Decoupling SAT -SAT 30 dB typ.

Return loss SAT > 10 dB

Technical data

Power consumption max. < 0,2 W

Screening factor Class A, according to EN 50083-2

Impedance 75

Operating temperature range -20…70 °C

Cascadable with DRC 1308, DRC 1312, DRC

1316, DRC 1324, DRC 1332

Weight 0.72 kg

Terrestrial trunk

Inputs TERR 1 pcs.

Outputs TERR 1 pcs.

Frequency range TERR 5... 862 MHz

Through loss TERR 2...3 dB

Dimensions (width x height x

depth)

characteristics

130x 290 x 63 mm

Isolation TERR - SAT 30 dB typ.

Return loss TERR > 10 dB

Subscriber outputs

Outputs 8 pcs.

Frequency range 5…2400 MHz

TERR type Passive

Insertion loss SAT 4...0 dB

Insertion TERR 24 dB (±2 dB)

Max. output level subscriber SAT 102 dBµV

Max. output level subscriber TERR 50...110 dBµV (passive)

Return loss subscriber SAT >10 dB

Return loss subscriber TERR >10 dB

Control signal 14/18 V, 0/22 kHz, DiSEqC 1.0

◼ Cascadable multiswitch for the distribution of 12 satellite polarisa-

tions and terrestrial signals

◼ Passive terrestrial path

◼ Integrated SAT amplifier for low insertion loss

◼ Pre-emphasis to compensate the cable loss at high frequencies

◼ Terrestrial signals available at the receiver without any power supply

of the multiswitch

◼ High screening efficiency according to Class A

◼ Compact dimensions paired with installation friendly distance bet-

ween the F-connectors

◼ Colour-coded inputs and outputs

◼ Made in Germany

Current consumption from

receiver

55 mA

F-socket 21 pcs.

DC supply voltage Connector type DC 5.5/2.1 mm

Colour-coding VL = black; HL = green; VH = red;

HH = yellow

Power indicator LED

Operating voltage 15 V DC

26 Multiswitch FLEXSWITCH

General data

Connectors

Multiswitch 13 inputs, cascade

DRC 1312 FLEXSWITCH multiswitch 13 in 12, cascade, TERR. passive

The DRC 1312 is a cascadable multiswitch with 13 inputs for the

distribution of three satellites and terrestrial signals. The polari-

sations are available at 13 cascade outputs for the installation of

further multiswitches. Commercially available DVB-S/S2 set-top-

boxes or TVs with an integrated receiver can be used at the 12

subscriber outputs. Inserted terrestrial signals like DVB-T/T2, DAB

or FM are available at each subscriber output as well. The very

low insertion loss of the DRC 1312 is realised through an active

satellite path. Through the passive terrestrial path it is possible to

feed in multimedia services like “LAN over Coax”, or signals from

a central headend system. The LNBs can be powered by previous-

ly installed amplifiers, or the available power supply DRP 1533.

Technical data

SAT-IF trunk

Inputs SAT 12 pcs.

Outputs SAT 12 pcs.

Frequency range SAT 950... 2400 MHz

Through loss SAT 1...3 dB

Decoupling SAT -SAT 30 dB typ.

Return loss SAT > 10 dB

Technical data

Power consumption max. < 0,2 W

Screening factor Class A, according to EN 50083-2

Impedance 75

Operating temperature range -20…70 °C

Cascadable with DRC 1308, DRC 1312, DRC

1316, DRC 1324, DRC 1332

Weight 0.98 kg

Terrestrial trunk

Inputs TERR 1 pcs.

Outputs TERR 1 pcs.

Frequency range TERR 5... 862 MHz

Through loss TERR 2...5 dB

Dimensions (width x height x

depth)

characteristics

189 x 291 x 63 mm

Isolation TERR - SAT 30 dB typ.

Return loss TERR > 10 dB

Subscriber outputs

Outputs 12 pcs.

Frequency range 5…2400 MHz

TERR type Passive

Insertion loss SAT 3...0 dB

Insertion TERR 28 dB (±3 dB)

Max. output level subscriber SAT 102 dBµV

Max. output level subscriber TERR 50...110 dBµV (passive)

Return loss subscriber SAT >10 dB

Return loss subscriber TERR >10 dB

Control signal 14/18 V, 0/22 kHz, DiSEqC 1.0

◼ Cascadable multiswitch for the distribution of 12 satellite polarisa-

tions and terrestrial signals

◼ Passive terrestrial path

◼ Integrated SAT amplifier for low insertion loss

◼ Pre-emphasis to compensate the cable loss at high frequencies

◼ Terrestrial signals available at the receiver without any power supply

of the multiswitch

◼ High screening efficiency according to Class A

◼ Compact dimensions paired with installation friendly distance bet-

ween the F-connectors

◼ Colour-coded inputs and outputs

◼ Made in Germany

Current consumption from

receiver

55 mA

F-socket 25 pcs.

DC supply voltage Connector type DC 5.5/2.1 mm

Colour-coding VL = black; HL = green; VH = red;

HH = yellow

Power indicator LED

Operating voltage 15 V DC

Multiswitch FLEXSWITCH 27

General data

Connectors

Multiswitch 13 inputs, cascade

DRC 1316 FLEXSWITCH multiswitch 13 in 16, cascade, TERR. passive

The DRC 1316 is a cascadable multiswitch with 13 inputs for the

distribution of three satellites and terrestrial signals. The polari-

sations are available at 13 cascade outputs for the installation of

further multiswitches. Commercially available DVB-S/S2 set-top-

boxes or TVs with an integrated receiver can be used at the 16

subscriber outputs. Inserted terrestrial signals like DVB-T/T2, DAB

or FM are available at each subscriber output as well. The very

low insertion loss of the DRC 1316 is realised through an active

satellite path. Through the passive terrestrial path it is possible to

feed in multimedia services like “LAN over Coax”, or signals from

a central headend system. The LNBs can be powered by previous-

ly installed amplifiers, or the available power supply DRP 1533.

Technical data

SAT-IF trunk

Inputs SAT 12 pcs.

Outputs SAT 12 pcs.

Frequency range SAT 950... 2400 MHz

Through loss SAT 1...3 dB

Decoupling SAT -SAT 30 dB typ.

Return loss SAT > 10 dB

Technical data

Power consumption max. < 0,2 W

Screening factor Class A, according to EN 50083-2

Impedance 75

Operating temperature range -20…70 °C

Cascadable with DRC 1308, DRC 1312, DRC

1316, DRC 1324, DRC 1332

Weight 1.04 kg

Terrestrial trunk

Inputs TERR 1 pcs.

Outputs TERR 1 pcs.

Frequency range TERR 5... 862 MHz

Through loss TERR 2...5 dB

Dimensions (width x height x

depth)

characteristics

189 x 291 x 63 mm

Isolation TERR - SAT 30 dB typ.

Return loss TERR > 10 dB

Subscriber outputs

Outputs 16 pcs.

Frequency range 5…2400 MHz

TERR type Passive

Insertion loss SAT 3...0 dB

Insertion TERR 28 dB (±3 dB)

Max. output level subscriber SAT 102 dBµV

Max. output level subscriber TERR 50...110 dBµV (passive)

Return loss subscriber SAT >10 dB

Return loss subscriber TERR >10 dB

Control signal 14/18 V, 0/22 kHz, DiSEqC 1.0

◼ Cascadable multiswitch for the distribution of 12 satellite polarisa-

tions and terrestrial signals

◼ Passive terrestrial path

◼ Integrated SAT amplifier for low insertion loss

◼ Pre-emphasis to compensate the cable loss at high frequencies

◼ Terrestrial signals available at the receiver without any power supply

of the multiswitch

◼ High screening efficiency according to Class A

◼ Compact dimensions paired with installation friendly distance bet-

ween the F-connectors

◼ Colour-coded inputs and outputs

◼ Made in Germany

Current consumption from

receiver

55 mA

F-socket 29 pcs.

DC supply voltage Connector type DC 5.5/2.1 mm

Colour-coding VL = black; HL = green; VH = red;

HH = yellow

Power indicator LED

Operating voltage 15 V DC

28 Multiswitch FLEXSWITCH

General data

Connectors

Multiswitch 13 inputs, cascade

DRC 1324 FLEXSWITCH multiswitch 13 in 24, cascade, TERR. passive

The DRC 1324 is a cascadable multiswitch with 13 inputs for the

distribution of three satellites and terrestrial signals. The polari-

sations are available at 13 cascade outputs for the installation of

further multiswitches. Commercially available DVB-S/S2 set-top-

boxes or TVs with an integrated receiver can be used at the 24

subscriber outputs. Inserted terrestrial signals like DVB-T/T2, DAB

or FM are available at each subscriber output as well. The very

low insertion loss of the DRC 1324 is realised through an active

satellite path. Through the passive terrestrial path it is possible to

feed in multimedia services like “LAN over Coax”, or signals from

a central headend system. The LNBs can be powered by previous-

ly installed amplifiers, or the available power supply DRP 1533.

Technical data

SAT-IF trunk

Inputs SAT 12 pcs.

Outputs SAT 12 pcs.

Frequency range SAT 950... 2400 MHz

Through loss SAT 2...5 dB

Decoupling SAT -SAT 30 dB typ.

Return loss SAT > 10 dB

Technical data

Power consumption max. < 0,2 W

Screening factor Class A, according to EN 50083-2

Impedance 75

Operating temperature range -20…70 °C

Cascadable with DRC 1308, DRC 1312, DRC

1316, DRC 1324, DRC 1332

Weight 1.52 kg

Terrestrial trunk

Inputs TERR 1 pcs.

Outputs TERR 1 pcs.

Frequency range TERR 5... 862 MHz

Through loss TERR 3...5 dB

Dimensions (width x height x

depth)

characteristics

310 x 293 x 63 mm

Isolation TERR - SAT 30 dB typ.

Return loss TERR > 10 dB

Subscriber outputs

Outputs 24 pcs.

Frequency range 5…2400 MHz

TERR type Passive

Insertion loss SAT 2...0 dB

Insertion TERR 33 dB (±3 dB)

Max. output level subscriber SAT 102 dBµV

Max. output level subscriber TERR 50…110 dBµV (passive)

Return loss subscriber SAT >10 dB

Return loss subscriber TERR >10 dB

Control signal 14/18 V, 0/22 kHz, DiSEqC 1.0

◼ Cascadable multiswitch for the distribution of 12 satellite polarisa-

tions and terrestrial signals

◼ Passive terrestrial path

◼ Integrated SAT amplifier for low insertion loss

◼ Pre-emphasis to compensate the cable loss at high frequencies

◼ Terrestrial signals available at the receiver without any power supply

of the multiswitch

◼ High screening efficiency according to Class A

◼ Compact dimensions paired with installation friendly distance bet-

ween the F-connectors

◼ Colour-coded inputs and outputs

◼ Made in Germany

Current consumption from

receiver

55 mA

F-socket 37 pcs.

DC supply voltage Connector type DC 5.5/2.1 mm

Colour-coding VL = black; HL = green; VH = red;

HH = yellow

Power indicator LED

Operating voltage 15 V DC

Multiswitch FLEXSWITCH 29

General data

Connectors

Multiswitch 13 inputs, cascade

DRC 1332 FLEXSWITCH multiswitch 13 in 32, cascade, TERR. passive

The DRC 1332 is a cascadable multiswitch with 13 inputs for the

distribution of three satellites and terrestrial signals. The polari-

sations are available at 13 cascade outputs for the installation of

further multiswitches. Commercially available DVB-S/S2 set-top-

boxes or TVs with an integrated receiver can be used at the 32

subscriber outputs. Inserted terrestrial signals like DVB-T/T2, DAB

or FM are available at each subscriber output as well. The very

low insertion loss of the DRC 1332 is realised through an active

satellite path. Through the passive terrestrial path it is possible to

feed in multimedia services like “LAN over Coax”, or signals from

a central headend system. The LNBs can be powered by previous-

ly installed amplifiers, or the available power supply DRP 1533.

Technical data

SAT-IF trunk

Inputs SAT 12 pcs.

Outputs SAT 12 pcs.

Frequency range SAT 950... 2400 MHz

Through loss SAT 2...5 dB

Decoupling SAT -SAT 30 dB typ.

Return loss SAT > 10 dB

Technical data

Power consumption max. < 0,2 W

Screening factor Class A, according to EN 50083-2

Impedance 75

Operating temperature range -20…70 °C

Cascadable with DRC 1308, DRC 1312, DRC

1316, DRC 1324, DRC 1332

Weight 1.52 kg

Terrestrial trunk

Inputs TERR 1 pcs.

Outputs TERR 1 pcs.

Frequency range TERR 5... 862 MHz

Through loss TERR 3...5 dB

Dimensions (width x height x

depth)

characteristics

310 x 293 x 63 mm

Isolation TERR - SAT 30 dB typ.

Return loss TERR > 10 dB

Subscriber outputs

Outputs 32 pcs.

Frequency range 5…2400 MHz

TERR type Passive

Insertion loss SAT 2...0 dB

Insertion TERR 33 dB (±3 dB)

Max. output level subscriber SAT 102 dBµV

Max. output level subscriber TERR 50…110 dBµV (passive)

Return loss subscriber SAT >10 dB

Return loss subscriber TERR >10 dB

Control signal 14/18 V, 0/22 kHz, DiSEqC 1.0

◼ Cascadable multiswitch for the distribution of 12 satellite polarisa-

tions and terrestrial signals

◼ Passive terrestrial path

◼ Integrated SAT amplifier for low insertion loss

◼ Pre-emphasis to compensate the cable loss at high frequencies

◼ Terrestrial signals available at the receiver without any power supply

of the multiswitch

◼ High screening efficiency according to Class A

◼ Compact dimensions paired with installation friendly distance bet-

ween the F-connectors

◼ Colour-coded inputs and outputs

◼ Made in Germany

Current consumption from

receiver

55 mA

F-socket 45 pcs.

DC supply voltage Connector type DC 5.5/2.1 mm

Colour-coding VL = black; HL = green; VH = red;

HH = yellow

Power indicator LED

Operating voltage 15 V DC

30 Multiswitch FLEXSWITCH

General data

Connectors

Multiswitch 17 inputs, cascade

DRC 1708 FLEXSWITCH multiswitch 17 in 8, cascade, TERR. passive

The DRC 1708 is a cascadable multiswitch with 17 inputs for the

distribution of four satellites and terrestrial signals. The polarisa-

tions are available at 17 cascade outputs for the installation of

further multiswitches. Commercially available DVB-S/S2 set-top-

boxes or TVs with an integrated receiver can be used at the eight

subscriber outputs. Inserted terrestrial signals like DVB-T/T2, DAB

or FM are available at each subscriber output as well. The very

low insertion loss of the DRC 1708 is realised through an active

satellite path. Through the passive terrestrial path it is possible to

feed in multimedia services like “LAN over Coax”, or signals from

a central headend system. The LNBs can be powered by previous-

ly installed amplifiers, or the available power supply DRP 1533.

Technical data

SAT-IF trunk

Inputs SAT 16 pcs.

Outputs SAT 16 pcs.

Frequency range SAT 950... 2400 MHz

Through loss SAT 1...2 dB

Decoupling SAT -SAT 30 dB typ.

Return loss SAT > 10 dB

Technical data

Power consumption max. < 0,2 W

Screening factor Class A, according to EN 50083-2

Impedance 75

Operating temperature range -20…70 °C

Cascadable with DRC 1708, DRC 1712, DRC

1716, DRC 1724, DRC 1732

Weight 0.76 kg

Terrestrial trunk

Inputs TERR 1 pcs.

Outputs TERR 1 pcs.

Frequency range TERR 5... 862 MHz

Through loss TERR 2...3 dB

Dimensions (width x height x

depth)

characteristics

130 x 290 x 63 mm

Isolation TERR - SAT 30 dB typ.

Return loss TERR > 10 dB

Subscriber outputs

Outputs 8 pcs.

Frequency range 5…2400 MHz

TERR type Passive

Insertion loss SAT 2...0 dB

Insertion TERR 24 dB (±2 dB)

Max. output level subscriber SAT 102 dBµV

Max. output level subscriber TERR 50...110 dBµV (passive)

Return loss subscriber SAT >10 dB

Return loss subscriber TERR >10 dB

Control signal 14/18 V, 0/22 kHz, DiSEqC 1.0

◼ Cascadable multiswitch for the distribution of 16 satellite polarisa-

tions and terrestrial signals

◼ Passive terrestrial path

◼ Integrated SAT amplifier for low insertion loss

◼ Pre-emphasis to compensate the cable loss at high frequencies

◼ Terrestrial signals available at the receiver without any power supply

of the multiswitch

◼ High screening efficiency according to Class A

◼ Compact dimensions paired with installation friendly distance bet-

ween the F-connectors

◼ Colour-coded inputs and outputs

◼ Made in Germany

Current consumption from

receiver

55 mA

F-socket 25 pcs.

DC supply voltage Connector type DC 5.5/2.1 mm

Colour-coding VL = black; HL = green; VH = red;

HH = yellow

Power indicator LED

Operating voltage 15 V DC

Multiswitch FLEXSWITCH 31

General data

Connectors

Multiswitch 17 inputs, cascade

DRC 1712 FLEXSWITCH multiswitch 17 in 12, cascade, TERR. passive

The DRC 1712 is a cascadable multiswitch with 17 inputs for the

distribution of four satellites and terrestrial signals. The polarisa-

tions are available at 17 cascade outputs for the installation of

further multiswitches. Commercially available DVB-S/S2 set-top-

boxes or TVs with an integrated receiver can be used at the 12

subscriber outputs. Inserted terrestrial signals like DVB-T/T2, DAB

or FM are available at each subscriber output as well. The very

low insertion loss of the DRC 1712 is realised through an active

satellite path. Through the passive terrestrial path it is possible to

feed in multimedia services like “LAN over Coax”, or signals from

a central headend system. The LNBs can be powered by previous-

ly installed amplifiers, or the available power supply DRP 1533.

Technical data

SAT-IF trunk

Inputs SAT 16 pcs.

Outputs SAT 16 pcs.

Frequency range SAT 950... 2400 MHz

Through loss SAT 1...3 dB

Decoupling SAT -SAT 30 dB typ.

Return loss SAT > 10 dB

Technical data

Power consumption max. < 0,2 W

Screening factor Class A, according to EN 50083-2

Impedance 75

Operating temperature range -20…70 °C

Cascadable with DRC 1708, DRC 1712, DRC

1716, DRC 1724, DRC 1732

Weight 1 kg

Terrestrial trunk

Inputs TERR 1 pcs.

Outputs TERR 1 pcs.

Frequency range TERR 5... 862 MHz

Through loss TERR 2...5 dB

Dimensions (width x height x

depth)

characteristics

189 x 291 x 63 mm

Isolation TERR - SAT 30 dB typ.

Return loss TERR > 10 dB

Subscriber outputs

Outputs 12 pcs.

Frequency range 5…2400 MHz

TERR type Passive

Insertion loss SAT 3...0 dB

Insertion TERR 28 dB (±3 dB)

Max. output level subscriber SAT 102 dBµV

Max. output level subscriber TERR 50...110 dBµV (passive)

Return loss subscriber SAT >10 dB

Return loss subscriber TERR >10 dB

Control signal 14/18 V, 0/22 kHz, DiSEqC 1.0

◼ Cascadable multiswitch for the distribution of 16 satellite polarisa-

tions and terrestrial signals

◼ Passive terrestrial path

◼ Integrated SAT amplifier for low insertion loss

◼ Pre-emphasis to compensate the cable loss at high frequencies

◼ Terrestrial signals available at the receiver without any power supply

of the multiswitch

◼ High screening efficiency according to Class A

◼ Compact dimensions paired with installation friendly distance bet-

ween the F-connectors

◼ Colour-coded inputs and outputs

◼ Made in Germany

Current consumption from

receiver

55 mA

F-socket 29 pcs.

DC supply voltage Connector type DC 5.5/2.1 mm

Colour-coding VL = black; HL = green; VH = red;

HH = yellow

Power indicator LED

Operating voltage 15 V DC

32 Multiswitch FLEXSWITCH

General data

Connectors

Multiswitch 17 inputs, cascade

DRC 1716 FLEXSWITCH multiswitch 17 in 16, cascade, TERR. passive

The DRC 1716 is a cascadable multiswitch with 17 inputs for the

distribution of four satellites and terrestrial signals. The polarisa-

tions are available at 17 cascade outputs for the installation of

further multiswitches. Commercially available DVB-S/S2 set-top-

boxes or TVs with an integrated receiver can be used at the 16

subscriber outputs. Inserted terrestrial signals like DVB-T/T2, DAB

or FM are available at each subscriber output as well. The very

low insertion loss of the DRC 1716 is realised through an active

satellite path. Through the passive terrestrial path it is possible to

feed in multimedia services like “LAN over Coax”, or signals from

a central headend system. The LNBs can be powered by previous-

ly installed amplifiers, or the available power supply DRP 1533.

Technical data

SAT-IF trunk

Inputs SAT 16 pcs.

Outputs SAT 16 pcs.

Frequency range SAT 950... 2400 MHz

Through loss SAT 1...3 dB

Decoupling SAT -SAT 30 dB typ.

Return loss SAT > 10 dB

Technical data

Power consumption max. < 0,2 W

Screening factor Class A, according to EN 50083-2

Impedance 75

Operating temperature range -20…70 °C

Cascadable with DRC 1708, DRC 1712, DRC

1716, DRC 1724, DRC 1732

Weight 1.02 kg

Terrestrial trunk

Inputs TERR 1 pcs.

Outputs TERR 1 pcs.

Frequency range TERR 5... 862 MHz

Through loss TERR 2...5 dB

Dimensions (width x height x

depth)

characteristics

189 x 291 x 63 mm

Isolation TERR - SAT 30 dB typ.

Return loss TERR > 10 dB

Subscriber outputs

Outputs 16 pcs.

Frequency range 5…2400 MHz

TERR type Passive

Insertion loss SAT 3...0 dB

Insertion TERR 28 dB (±3 dB)

Max. output level subscriber SAT 102 dBµV

Max. output level subscriber TERR 50...110 dBµV (passive)

Return loss subscriber SAT >10 dB

Return loss subscriber TERR >10 dB

Control signal 14/18 V, 0/22 kHz, DiSEqC 1.0

◼ Cascadable multiswitch for the distribution of 16 satellite polarisa-

tions and terrestrial signals

◼ Passive terrestrial path

◼ Integrated SAT amplifier for low insertion loss

◼ Pre-emphasis to compensate the cable loss at high frequencies

◼ Terrestrial signals available at the receiver without any power supply

of the multiswitch

◼ High screening efficiency according to Class A

◼ Compact dimensions paired with installation friendly distance bet-

ween the F-connectors

◼ Colour-coded inputs and outputs

◼ Made in Germany

Current consumption from

receiver

55 mA

F-socket 33 pcs.

DC supply voltage Connector type DC 5.5/2.1 mm

Colour-coding VL = black; HL = green; VH = red;

HH = yellow

Power indicator LED

Operating voltage 15 V DC

Multiswitch FLEXSWITCH 33

General data

Connectors

Multiswitch 17 inputs, cascade

DRC 1724 FLEXSWITCH multiswitch 17 in 24, cascade, TERR. passive

The DRC 1724 is a cascadable multiswitch with 17 inputs for the

distribution of four satellites and terrestrial signals. The polarisa-

tions are available at 17 cascade outputs for the installation of

further multiswitches. Commercially available DVB-S/S2 set-top-

boxes or TVs with an integrated receiver can be used at the 24

subscriber outputs. Inserted terrestrial signals like DVB-T/T2, DAB

or FM are available at each subscriber output as well. The very

low insertion loss of the DRC 1724 is realised through an active

satellite path. Through the passive terrestrial path it is possible to

feed in multimedia services like “LAN over Coax”, or signals from

a central headend system. The LNBs can be powered by previous-

ly installed amplifiers, or the available power supply DRP 1533.

Technical data

SAT-IF trunk

Inputs SAT 16 pcs.

Outputs SAT 16 pcs.

Frequency range SAT 950... 2400 MHz

Through loss SAT 2...5 dB

Decoupling SAT -SAT 30 dB typ.

Return loss SAT > 10 dB

Technical data

Power consumption max. < 0,2 W

Screening factor Class A, according to EN 50083-2

Impedance 75

Operating temperature range -20…70 °C

Cascadable with DRC 1708, DRC 1712, DRC

1716, DRC 1724, DRC 1732

Weight 1.54 kg

Terrestrial trunk

Inputs TERR 1 pcs.

Outputs TERR 1 pcs.

Frequency range TERR 5... 862 MHz

Through loss TERR 3...5 dB

Dimensions (width x height x

depth)

characteristics

310 x 293 x 63 mm

Isolation TERR - SAT 30 dB typ.

Return loss TERR > 10 dB

Subscriber outputs

Outputs 24 pcs.

Frequency range 5…2400 MHz

TERR type Passive

Insertion loss SAT 2...0 dB

Insertion TERR 33 dB (±3 dB)

Max. output level subscriber SAT 102 dBµV

Max. output level subscriber TERR 50...110 dBµV (passive)

Return loss subscriber SAT >10 dB

Return loss subscriber TERR >10 dB

Control signal 14/18 V, 0/22 kHz, DiSEqC 1.0

◼ Cascadable multiswitch for the distribution of 16 satellite polarisa-

tions and terrestrial signals

◼ Passive terrestrial path

◼ Integrated SAT amplifier for low insertion loss

◼ Pre-emphasis to compensate the cable loss at high frequencies

◼ Terrestrial signals available at the receiver without any power supply

of the multiswitch

◼ High screening efficiency according to Class A

◼ Compact dimensions paired with installation friendly distance bet-

ween the F-connectors

◼ Colour-coded inputs and outputs

◼ Made in Germany

Current consumption from

receiver

55 mA

F-socket 41 pcs.

DC supply voltage Connector type DC 5.5/2.1 mm

Colour-coding VL = black; HL = green; VH = red;

HH = yellow

Power indicator LED

Operating voltage 15 V DC

34 Multiswitch FLEXSWITCH

General data

Connectors

Multiswitch 17 inputs, cascade

DRC 1732 FLEXSWITCH multiswitch 17 in 32, cascade, TERR. passive

The DRC 1732 is a cascadable multiswitch with 17 inputs for the

distribution of four satellites and terrestrial signals. The polarisa-

tions are available at 17 cascade outputs for the installation of

further multiswitches. Commercially available DVB-S/S2 set-top-

boxes or TVs with an integrated receiver can be used at the