catalogo completo alluminio - comefimetallisrl.com · 120x3 972 lxs gr/ml 120x25 8.100 120x30 9.720...
TRANSCRIPT
CO.ME.F.I. Metalli srlC.so Vercelli, 13
10078 Venaria Reale (TO)Tel: 011 6474089 - Fax: 011 6813911
E-mail: [email protected]
This catalogue has been issued to inform our clients regarding the material we can provide. We emphasise the fact that not all measures/models are available in store, rather only those that are more frequently requested; thus, we advise you to consult us to find out the exact availability of the items displayed below. Our technical staffcan propose alternatives or study drawing matrices.TheThe profile sections that are reproduced in this catalogue are not at scale and are accompanied only by the maximum quotas. The weights for the linear meter of each section are theoretical and thus must be considered as indicative, being subject to modification according to the unified and usual tolerances. The length of the commercial profiles is normally 6 meters and in some cases 4.2Meters. The heavy duty bars / diameter is 3 meters
General catalogue
Aluminium flat bars
Alloy 6060 (UNI 9006/1)
Alloy 6082 (UNI 9006/4)
Lxs gr/ml
10X2 55
10X3 85
10X4 110
10X5 135
10X6 165
10X7 180
10X8 220
12X2 65
12X3 98
12X5 165
12X6 198
12X8 255
12X10 324
15X2 80
15X4 165
15X5 210
15X6 245
15X7 280
15X8 330
15X10 410
Lxs gr/ml
18X3 145
20X2 110
20X3 165
20X4 220
20X5 270
20X6 335
20X7 385
20X8 450
20X10 550
20X12 650
20X15 800
25X2 135
25X3 210
25X4 280
25X5 350
25X6 405
25X7 472
25X8 540
25X10 690
25X15 1.020
Lxs gr/ml
25X20 1.370
30X2 165
30X3 245
30X4 330
30X5 415
30X6 490
30X8 650
30X10 810
30X12 972
30X15 1.215
30X20 1.620
30X25 2.025
35X2 190
35X5 475
35X6 570
35X8 760
35X10 950
35X12 1.134
35X15 1.417
35X20 1.890
Lxs gr/ml
35X25 2.363
40X2 215
40X3 330
40X4 440
40X5 545
40X6 650
40X7 755
40X8 864
40X10 1.080
40X12 1.296
40X15 1.620
40X20 2.160
40X25 2.700
45X2 245
45X4 490
45X5 610
45X6 730
45X10 1.220
45X15 1.822
45X20 2.430
Lxs gr/ml
50X2 270
50X3 410
50X4 545
50X5 680
50X6 815
50X8 1.080
50X10 1.350
50X12 1.620
50X15 2.025
50X20 2.700
50X25 3.375
50X30 4.050
50X35 4.725
60X2 325
60X3 490
60X4 650
60X5 820
60X6 980
60X8 1.290
60X10 1.620
Lxs gr/ml
60X12 1.944
60X15 2.430
60X20 3.240
60X25 4.050
60X30 4.860
60X35 5.670
70X2 378
70X3 567
70X4 756
70X6 1.134
70X8 1.512
70X10 1.890
Lxs gr/ml
80X5 1.080
80X6 1.296
80X7 1.512
80X8 1.728
80X10 2.160
80X12 2.592
80X15 3.240
80X20 4.320
80X40 8.640
80X60 12.960
90X8 1.944
90X10 2.430
Lxs gr/ml
100X8 2.160
100X10 2.700
100X12 3.240
100X15 4.050
100X20 5.400
100X25 6.750
100X30 8.100
100X40 10.800
100X50 13.500
100X60 16.200
100X70 18.900
120X3 972
Lxs gr/ml
120x25 8.100
120x30 9.720
120x50 16.200
120x60 19.440
120x70 22.680
130x10 3.510
130x12 4.212
130x15 5.265
130x30 10.530
130x50 17.550
130x60 21.060
140x3 1.134
Lxs gr/ml
150x8 3.240
150x10 4.050
150x15 6.075
150x20 8.100
150x30 12.150
150x50 20.250
150x60 24.300
160x20 8.640
160x30 12.960
180x10 4.860
180x30 14.580
200x6 3.240
Aluminium flat bars made of 6060 and 6082 Alloy
The 6060 Alloy (UNI 9006/1) is used for the production of various models of bars with aluminium, magnesium and silicon. The optimum extrudability allows creating even very complex sections of subtlethickness. It is not very resistant but resists well to corrosion.
The 6082 alloy (UNI 9006/4) is the best alloy in the 6000 series. Made of aluminium-silicon- magnesium- manganese, it is very resistant and allows welding and optimal machining operations for all uses
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
70X15 2.835
70X20 3.780
70X30 5.670
70X35 6.664
70X50 9.450
80X2 432
80X3 648
80X4 864
90X15 3.645
90X60 14.580
100X2 540
100X3 810
100X4 1.080
100X5 1.350
100X6 1.620
100X7 1.890
120X4 1.296
120X5 1.620
120x6 1.944
120x7 2.268
120x8 2.592
120x10 3.240
120x12 3.888
120x15 4.860
140x5 1.890
140x6 2.268
140x8 3.024
140x10 3.780
140x15 5.670
150x3 1.215
150x4 1.620
150x6 2.430
200x8 4.320
200x10 5.400
200x15 8.100
200x20 10.800
200x25 13.500
200x30 16.200
200x50 27.000
220x15 8.910
Lxs gr/ml
230x35 21.735
250x10 6.750
250x25 16.875
250x40 27.200
280x10 7.560
285x20 15.390
300x10 8.100
300x15 12.150
300x20 16.200
300x30 24.300
310x25 20.925
310x40 33.480
310x50 41.850
350x20 18.900
400x30 32.400
CO.ME.F.I. metalli srl since 1947 - Tel: 011 64 74 089 - Fax: 011 68 13 911 - www.comefimetalli.it
Aluminium round bars
Available made of Alloy 6060 (UNI 9006/1)
Alloy6082 (UNI 9006/4)
Alloy 2011 (UNI9002/5)
D gr/ml
4 34
5 53
6 77
7 108
8 136
9 172
10 212
11 257
12 305
13 358
14 420
15 477
16 543
17 613
18 687
19 770
20 848
21 935
22 1.026
23 1.125
D gr/ml
24 1.224
25 1.325
26 1.434
27 1.545
28 1.660
29 1.782
30 1.908
31 2.038
32 2.170
33 2.310
34 2.450
35 2.598
36 2.750
37 2.902
38 3.062
39 3.225
40 3.393
41 3.563
42 3.740
45 4.293
D gr/ml
46 4.490
48 4.884
50 5.300
52 5.740
55 6.415
60 7.634
65 8.959
70 10.391
75 11.928
80 13.572
85 15.321
90 17.177
95 19.138
100 21.206
105 23.379
110 25.659
115 28.045
120 30.536
125 33.134
130 35.838
D gr/ml
140 41.563
150 47.713
160 54.287
170 61.253
180 68.707
190 76.410
200 84.823
210 93.469
220 102.636
230 112.121
240 122.083
250 132.469
260 143.278
270 154.511
280 166.168
300 190.755
320 217.036
350 259.639
380 306.056
400 339.320
D gr/ml
420 387.900
450 492.200
CO.ME.F.I. metalli srl since 1947 - Tel: 011 64 74 089 - Fax: 011 68 13 911 - www.comefimetalli.it
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
Half round made of Aluminium
Alloy 6060 (UNI 9006/1)
Code AxB gr/ml
5467 15x3 90
5469 15x4 130
5473 20x4 155
5478 20x5 195
5443 25x3 160
6225 25x5 235
5480 30x4 300
6097 30x5 250
5492 40x4 305
CO.ME.F.I. metalli srl since 1947 - Tel: 011 64 74 089 - Fax: 011 68 13 911 - www.comefimetalli.it
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
http://localhost:8080/comefi/doc/b._setAccounthttp://localhost:8080/comefi/doc/b._trackPageviewhttp://localhost:8080/comefi/doc/text/javascripthttps://ssl/http://www/http://localhost:8080/comefi/doc/.google-analytics.com/ga.js
Aluminium hexagonal bars
Available made of Alloy 6060 (UNI 9006/1)
Alloy 6082 (UNI 9006/4)
Alloy 2011 (UNI9002/5)
CH gr/ml
6 80
7 120
8 160
9 198
10 245
11 296
12 353
13 413
14 480
15 550
16 626
17 706
18 792
19 883
20 977
21 1.078
22 1.183
23 1.293
24 1.408
25 1.527
CH gr/ml
26 1.652
27 1.782
28 1.908
29 2.054
30 2.200
32 2.498
34 2.894
36 3.162
38 3.520
40 3.902
42 4.203
44 4.722
46 5.163
48 5.621
50 5.845
55 7.081
60 8.428
70 11.460
80 14.982
CO.ME.F.I. metalli srl since 1947 - Tel: 011 64 74 089 - Fax: 011 68 13 911 - www.comefimetalli.it
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
http://localhost:8080/comefi/doc/b._setAccounthttp://localhost:8080/comefi/doc/b._trackPageviewhttp://localhost:8080/comefi/doc/text/javascripthttps://ssl/http://www/http://localhost:8080/comefi/doc/.google-analytics.com/ga.js
Round tubes made of AluminiumAlloy 6060 (UNI 9006/1)
Dxs gr/ml
5x1 33
6x1 42
6x1.5 56
7x1 51
7x1.5 70
8X1 60
8x1.5 83
8x2 102
9x1 68
10x1 76
10x1.5 107
10x2 136
10x2.5 139
11x1 85
11x1.5 120
11x2 153
11x2.5 180
12x1 93
12x1.5 133
12x2 170
Dxs gr/ml
12x2.5 202
12x3 229
13x1 102
13x1.5 145
13x2 187
13x2.5 223
13x3 255
14x1 110
14x1.5 158
14x2 204
14x2.5 244
14x3.5 312
14x4 339
15x1 119
15x2 221
15x2.5 265
15x3 306
15x3.5 342
15x4 372
16x1 127
Dxs gr/ml
16x1.5 184
16x2 238
16x2.5 286
16x3 331
16x3.5 371
16x4 407
16x5 467
17x1 136
17x1.5 196
17x2 255
17x2.5 308
17x3 356
17x3.5 401
17x4 441
17x5 509
18x1 144
18x1.5 209
18x2 272
18x2.5 329
18x3 382
Dxs gr/ml
18x4 475
18x5 551
14x3 280
19x1 153
19x1.5 222
19x2 289
19x2.5 350
19x3 407
19x3.5 460
19x4 509
19x5 594
20x1 161
20x1.5 235
20x2 306
20x2.5 371
20x3 433
203.5 490
20x4 543
20x5 636
21x1 170
Dxs gr/ml
21x1.5 247
21x2 323
21x2.5 393
21x3 458
21x3.5 520
21x4 577
21x5 679
22x1 178
22x2 339
22x2.5 414
22x3 484
22x4 611
22x5 721
23x1 187
23x1.5 273
23x2 356
23x2.5 435
23x3 509
23x4 645
23x5 764
Dxs gr/ml
24x1 195
24x1.5 285
24x2 373
24x2.5 456
24x3 535
24x4 679
24x5 806
25x1 204
25x1.5 298
25x2 390
25x2.5 477
25x3 560
25x4 713
Dxs gr/ml
26x5 891
27x1 221
27x1.5 324
27x2 424
27x2.5 520
27x3 611
27x4 781
27x5 933
28x1 229
28x1.5 336
28x2 441
28x2.5 541
28x3 636
Dxs gr/ml
29x3.5 757
29x4 848
29x5 1.018
30x1 246
30x1.5 362
30x2 475
30x2.5 583
30x3 687
30x3.5 787
30x4 882
30x5 1.018
31x1 255
31x1.5 374
Dxs gr/ml
32x2 509
32x2.5 626
32x3 738
32x3.5 846
32x4 950
32x5 1.145
33x1 272
33x1.5 400
33x2 526
33x3 764
33x3.5 876
33x4 984
33x5 1.188
Dxs gr/ml
34x5 1.235
35x1 290
35x1.5 430
35x2 560
35x2.5 690
35x3 815
35x3.5 940
35x4 1.055
35x5 1.280
36x1 300
36x1.5 440
36x2 580
36x3 842
The production of CO.ME.F.I profiled aluminium tubes uses the most modern execution solutions, entrusted to expert staff able to manage the modern robotic and automated systems that allowaluminium processing from the highest level characteristics: inalterability, structural strength and an infinite range of sizes and models, able to satisfy the largest spectrum of requirements. Eachaluminium tube that leaves our plant in Turin is the testimony of the professionalism and quality of our production, top of the range for more than 50 years.
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
25x5 848
26x1 212
26x1.5 311
26x2 407
26x2.5 498
26x3 585
26x4 747
28x4 814
28x5 976
29x1 238
29x1.5 349
29x2 458
29x2.5 562
29x3 662
31x2 492
31x2.5 605
31x3.5 817
31x4 916
31x5 1.103
32x1 263
32x1.5 387
34x1 280
34x1.5 415
34x2 542
34x2.5 670
34x3 790
34x3.5 908
34x4 1.020
36x3.5 970
36x4 1.090
36x5 1.320
37x1 308
37x1.5 452
37x2 595
37x2.5 735
Dxs gr/ml
37x3 870
37x3.5 1.000
37x4 1.125
37x5 1.360
38x1 318
38x1.5 470
38x2 620
38x2.5 755
38x3 895
38x3.5 1.030
38x4 1.160
38x5 1.410
39x1 325
39x1.5 480
39x2 630
39x2.5 775
39x3 920
39x3.5 1.058
39x4 1.190
39x5 1.148
Dxs gr/ml
40x1 330
40x1.5 490
40x2 648
40x2.5 800
40x3 950
40x3.5 1.090
40x4 1.225
40x5 1.490
41x1 340
41x1.5 505
41x2 662
41x2.5 820
41x3 975
41x3.5 1.120
41x4 1.260
41x5 1.535
42x1 350
42x1.5 520
42x2 680
42x2.5 840
Dxs gr/ml
42x3 1.000
42x3.5 1.150
42x4 1.295
42x5 1.575
43x1 356
43x1.5 528
43x2 695
43x3 1.017
43x4 1.353
44x1 365
44x1.5 540
44x2 712
44x2.5 880
44x3 1.043
44x3.5 1.202
44x4 1.356
44x5 1.653
45x1 380
45x1.5 560
45x2 740
Dxs gr/ml
45x2.5 910
45x3 1.080
45x3.5 1.231
45x4 1.390
45x5 1.696
46x1 382
46x1.5 566
46x2 729
46x2.5 922
46x3 1.094
46x3.5 1.261
46x4 1.424
46x5 1.738
47x1 390
47x1.5 579
47x2 763
47x2.5 943
47x3 1.119
47x3.5 1.291
47x4 1.458
Dxs gr/ml
47x5 1.780
47x6 2.085
48x1 400
48x1.5 600
48x2 790
48x2.5 980
48x3 1.160
48x3.5 1.320
48x4 1.492
48x5 1.823
50x1 420
50x1.5 620
50x2 820
50x2.5 1.020
50x3 1.210
50x4 1.560
50x5 1.908
55x1.5 681
55x2 899
55x2.5 1.113
Dxs gr/ml
55x3 1.323
55x4 1.731
55x5 2.127
55x7.5 3.020
55x10 3.817
55x12.5 4.506
55x15 5.090
60x1.5 744
60x2 984
60x2.5 1.219
60x3 1.451
60x3.5 1.678
60x4 1.900
60x5 2.333
Dxs gr/ml
65x3 1.578
65x3.5 1.826
65x4 2.070
65x5 2.545
65x10 4.663
65x12.5 5.566
65x12 6.361
70x1.5 871
70x2 1.154
70x2.5 1.432
70x3 1.705
70x3.5 1.974
70x4 2.239
70x5 2.757
Dxs gr/ml
75x5 2.969
76x2 1.255
76x2.5 1.557
80x1.5 999
80x2 1.323
80x2.5 1.644
80x3 1.960
80x4 2.579
80x5 3.181
80x10 5.935
80x15 8.271
80x20 10.179
82x3 2.011
85x1.5 1.062
Dxs gr/ml
90x2 1.493
90x2.5 1.856
90x3 2.214
90x4 2.918
90x5 3.605
90x10 6.786
90x15 9.538
90x50 11.876
100x1.5 1.253
100x3 2.469
100x3.5 2.865
100x4 3.257
100x5 4.029
100x10 7.635
Dxs gr/ml
105x5 4.241
110x2.5 2.280
110x3 2.723
110x4 3.597
110x5 4.453
110x10 8.482
110x15 12.088
110x20 15.200
110x25 18.025
120x1.5 1.507
120x2.5 2.492
120x7 6.710
120x10 9.330
120x15 13.360
http://localhost:8080/comefi/doc/b._setAccounthttp://localhost:8080/comefi/doc/b._trackPageviewhttp://localhost:8080/comefi/doc/text/javascripthttps://ssl/http://www/http://localhost:8080/comefi/doc/.google-analytics.com/ga.js
60x10 4.930
60x12.5 5.036
62x2 1.017
65x1.5 808
65x2 1.069
65x2.5 1.326
70x15 6.998
70x20 8.482
75x1.5 935
75x2 1.239
75x2.5 1.538
75x3 1.832
85x2 1.408
85x2.5 1.750
85x3 2.087
85x4 2.748
85x5 3.393
90x1.5 1.126
100x15 10.816
100x20 13.572
100x25 15.905
105x2.5 2.173
105x3 2.596
105x4 3.427
120x20 16.965
120x30 22.900
130x2.5 2.703
130x3 3.320
130x3.5 3.754
130x5 5.275
Dxs gr/ml
130x10 10.174
130x15 14.632
130x90 18.661
130x25 22.266
130x30 25.447
140x5 5.726
140x10 11.027
140x20 20.357
140x35 31.172
150x5 6.148
150x10 11.875
150x15 17.177
150x20 22.054
160x4 5.297
160x5 6.574
160x10 12.724
160x15 18.450
160x20 23.740
170x5 6.998
170x10 13.572
Dxs gr/ml
170x15 19.700
170x20 25.447
180x5 7.422
180x10 14.420
180x15 20.994
180x20 27.144
200x10 16.116
200x15 23.538
200x20 30.536
220x8 14.382
220x20 33.912
230x10 18.700
230x15 27.350
250x8 16.421
250x12 24.214
250x15 29.890
270x15 32.428
280x10 22.890
280x12.5 28.348
300x10 24.580
Dxs gr/ml
320x6 15.972
330x6.5 17.830
330x12.5 33.650
CO.ME.F.I. metalli srl since 1947 - Tel: 011 64 74 089 - Fax: 011 68 13 911 - www.comefimetalli.it
Square tubes made of Aluminium
Alloy 6060 (UNI 9006/1)
LxLxs gr/ml
10X10X1 97
12X12X1 119
14X14X1 140
15X15X1 150
15X15X1.5 219
15x15x2 280
16x16x1 162
18x18x1 184
20x20x1 205
20x20x1.5 300
20x20x2 390
25x25x1 260
25x25x1.5 380
25x25x2 497
30x30x1 313
30x30x2 605
30x30x3 875
35x35x1.5 543
35x35x2 713
40x40x.1.5 624
LxLxs gr/ml
40x40x2 820
40x40x2.5 1.012
40x40x4 1.551
45x45x1.5 705
45x45x2 919
45x45x3 1.360
50x50x1.5 786
50x50x2 1.037
50x50x3 1.692
50x50x4 1.981
60x60x2 1.253
60x60x3 1.850
60x60x4 2.420
70x70x2 1.470
70x70x4 2.850
80x80x2 1.685
80x80x3 2.495
80x80x4 3.285
90x90x2 1.900
100x100x2 2.117
LxLxs gr/ml
100x100x3 3.143
100x100x4 4.147
100x100x5 5.130
120x120x2 2.549
120x120x5 6.230
135x135x5 7.020
CO.ME.F.I. metalli srl since 1947 - Tel: 011 64 74 089 - Fax: 011 68 13 911 - www.comefimetalli.it
The CO.ME.F.I. catalogue offers a wide range of products for constructions and industry, products derived from non-iron materials from which a square tube is made of particular versatility andefficiency, able to ensure a notable resistance and a large range of applications at industrial level, thanks to particular treatment that allow the integration even with those hydro-sanitary systems wherethe integrity and the inalterability of the tubing is an essential component.
Are you searching a square tube of modular aluminium with a specific weight to meet the requirements of your professional activity? Do not hesitate to contact the offices of our company, where youwill find expert staff, able to provide you will all the indications and the necessary information, or consult our on-line catalogue, where you will find our entire production line, being sure to put your trustin a company that operates successfully and professionally for more than 50 years in a field where constant updating is needed in order to keep up with the market demand.
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
http://localhost:8080/comefi/doc/b._setAccounthttp://localhost:8080/comefi/doc/b._trackPageviewhttp://localhost:8080/comefi/doc/text/javascripthttps://ssl/http://www/http://localhost:8080/comefi/doc/.google-analytics.com/ga.js
Rectangular tubes made of Aluminium
Alloy 6060 (UNI 9006/1)
Lxlxs gr/ml
15X10X1.5 185
20X10X1.5 219
20X10X2 284
20X15X1.5 260
25X10X1.5 262
25X15X1.5 308
25X15X2 389
25X20X2 446
30X10X1.5 300
30X15X1.5 345
30X15X2 448
30X20X1.5 385
30X20X2 500
30X20X2.5 607
35X15X1.5 373
35X15X2 497
35X20X1.5 413
35X20X2 550
35X25X2 605
40X10X1 260
Lxlxs gr/ml
40X10X1.5 362
40X10X2 497
40X15X1.5 421
40X20X1.5 462
40X20X2 605
40X20X3 874
40X20X4 1.125
40X25X1.5 502
40X25X2.5 810
40X30X2 713
40X30X2.5 878
40X30X3 1.037
40X30X4 1.340
45X15X2 605
45X20X2 659
45X25X1.5 543
50X10X2 605
50X15X2 660
50X20X1.5 550
50X20X2 712
Lxlxs gr/ml
50X20X4 1.382
50X25X1.5 583
50X25X2 767
50X30X2 820
50X30X3 1.195
50X40X2 929
50X40X2.5 1.240
50X40X3 1.361
50X40X4 1.772
60X20X2 820
60X25X2 875
60X30X1.5 705
60X30X2 929
60X30X3 1.360
60X35X2 985
60X40X1.5 786
60X40X2 1.037
60X40X2.5 1.280
60X40X3 1.523
60X40X4 1.987
Lxlxs gr/ml
60X50X3 1.685
65X15X1 421
70X15X1.5 665
70X20X1.5 705
70X20X2 929
70X30X2 1.037
70X30X3 1.523
80X15X1.5 745
80X20X1.3 683
80X20X1.5 786
80X20X2 1.040
80X30X2 1.145
80X40X1.6 1.010
80X40X2 1.253
80X40X3 1.846
80X40X4 2.410
80X60X4 2.851
80X50X2 1.360
80X50X3 2.008
80X50X4 2.630
Lxlxs gr/ml
90X40X2 1.361
100X20X2 1.252
100X25X1.3 870
100X25X2 1.307
100X30X1.3 910
100X30X2 1.360
100X40X2 1.470
100X40X4 2.680
100X50X2 1.576
100X50X4 3.067
100X60X2 1.685
100X60X4 3.285
120X20X2 1.470
120X40X4 3.285
120X45X2 1.740
120X50X4 3.715
120X60X4 3.758
120X80X3 3.142
150X50X2 2.117
150X50X3 3.142
Lxlxs gr/ml
150X40X4 3.931
150X100X3 3.953
160X40X4 4.147
180X40X4 4.579
180X75X2 2.711
200X50X3 3.953
200X50X4 5.227
250X50X3 4.763
CO.ME.F.I. metalli srl since 1947 - Tel: 011 64 74 089 - Fax: 011 68 13 911 - www.comefimetalli.it
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
http://localhost:8080/comefi/doc/b._setAccounthttp://localhost:8080/comefi/doc/b._trackPageviewhttp://localhost:8080/comefi/doc/text/javascripthttps://ssl/http://www/http://localhost:8080/comefi/doc/.google-analytics.com/ga.js
Smooth aluminium metal sheets
Our service centre can perform cuts according to measurements.
Width mm Weight Kg/mq
Sheets formats
2.000x1.000 2.500x1.250 3.000x1.000 3.000x1.500 3.500x1.250 4.000x1.500
0,2 0,54
0,3 0,81 1.62 2.52 2.43 3.64 3.53 4.86
0,4 1,08 2.16 3.38 3.24 4.86 4.71 6.48
0,5 1,35 2.70 4.21 4.05 6.07 5.91 8.10
0,6 1,62 3.24 5.07 4.86 7.29 7.09 9.72
0,7 1,89 3.78 5.89 5.67 8.50 8.25 11.34
0,8 2,16 4.32 6.73 6.48 9.72 9.43 12.96
1,0 270 5.40 8.44 8.10 12.15 11.82 16.20
1,2 3,24 6.50 10.13 9.72 14.58 14.18 19.44
1,5 4,05 8.10 12.65 12.15 18.22 17.72 24.30
2,0 5,40 10.80 16.88 16.20 24.30 23.63 32.40
2,5 5,75 13.50 21.10 20.25 30.37 29.53 40.50
3,0 8,10 16.20 25.31 24.30 36.45 35.44 48.60
4,0 10,8 21.60 33.70 32.40 48.60 47.20 64.80
5,0 13,5 27.00 42.19 40.50 60.75 59.00 81.00
6,0 16,2 32.40 50.63 48.60 72.90 70.80 97.20
8,0 21,6 43.20 67.50 64.80 97.20 94.50 129.60
10,0 270 54.00 84.38 81.00 125.50 118.00 162.00
12,0 32,4 64.80 101.25 145.80 141.75 194.40
Non-slip Aluminium metal sheets
Width mm
Non-slip metal sheets formats
2.000x1.000 2.500x1.250 3.000x1.000 6.000x1.500
2,0 Weight 12.5 20.7 26.3
2,5 Weight 15.4 24.0 40.6
3,0 Weight 18.0 28.2 41.0 78.3
4,0 Weight 23.4 36.9 53.1
Consult the technical data of aluminium laminates made by CO.ME.F.I. Metalli: get information regarding formats, sizes, weight and characteristics of metal
sheets and aluminium plates, to discover the most adequate products that fulfil the most specific requirements of your company.
From non-slip metal sheets to available solution for pre-treated aluminium metal sheets: download the data sheets with all the details for each product.
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product..
5,0 Weight 29.0 47.0 68.0
6,0 Weight 59.0 41.4
7,0 Weight 69.8
Width in mm
Formats of rice grain metal sheets
2.500x1.250
1,5 Weight 12.65
Pre-treated Aluminium metal sheets
Format Width Weight Color
2.000x1.000 0.5 2,70 Silver (oxidation) Gold (oxidation)
0.8 4,32 Silver (oxidation) Red (preverniciata) Green (preverniciata)
1.0 5,40 Silver (oxidation) Gold (oxidation) Black (oxidation)
1.5 8,10 Silver (oxidation)
2.0 10,80 Silver (oxidation) Black (oxidation)
2.5 13,50 Silver (oxidation)
3.0 16,20 Silver (oxidation)
4.0 21,60 Silver (oxidation)
2.500x1.250 1 8,43 Silver (oxidation)
1.5 12,66 Silver (oxidation)
2 16,90 Silver (oxidation)
3 25,32 Silver (oxidation)
Physical states of the metal sheets
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
Main alloys and physical states of the aluminium metal sheets
ALLOY 1050Aluminium 99 . 5
ALLOY 5754Peralluman
ALLOY 6082AnticGolddal
ALLOY 5005For oxidation
Serie 1000 - 3000 - 5000 Serie 2000- 6000 - 7000
F Average of extrusion (ex HL) T1 Cooled, aged naturally
0 Annealed (ex R) T2Cooled, rawed, aged naturally
H111 Annealed and flat T3 Solution heat treated, hardened, cooled, aged naturally
H22Raw
(ex H15)
T4 Solution heat treated, hardened, cooled, aged naturally
H24Raw
(ex H30)
T5 Cooled after being artificially heat processed and aged
H26Raw (ex H50)
76Solution heat treated, hardened, aged naturally
H28Raw (ex H70)
T7Solution heat treated, hardened, cooled, aged naturally
H19Extra raw
T8 Solution heat treated, tempered, aged
T9 Solubilizzato, temprato, aged, cooled
CO.ME.F.I. metalli srl since 1947 - Tel: 011 64 74 089 - Fax: 011 68 13 911 - www.comefimetalli.it
Equal sided Aluminium channels
Alloy 6060 (UNI 9006/1)
BxHxs gr/ml
6x6x1 43
7x7x1 51
8x8x1 60
10x10x1 76
10x10x1.5 110
10x10x2 140
12x12x1 92
12x12x1.5 130
12x12x2 150
15x15x1 116
15x15x1.5 170
15x15x2 220
20x20x1.5 232
20x20x2 302
20x20x3 440
25x25x2 383
30x30x2 465
30x30x3 705
35x35x2 545
35x35x3 802
BxHxs gr/ml
40x40x2 626
40x40x2.5 777
40x40x4 1.210
45x45x3 1.045
50x50x2 790
50x50x3 1.166
50x50x5 2.160
60x60x2 950
70x70x4 2.182
CO.ME.F.I. metalli srl since 1947 - Tel: 011 64 74 089 - Fax: 011 68 13 911 - www.comefimetalli.it
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
http://localhost:8080/comefi/doc/b._setAccounthttp://localhost:8080/comefi/doc/b._trackPageviewhttp://localhost:8080/comefi/doc/text/javascripthttps://ssl/http://www/http://localhost:8080/comefi/doc/.google-analytics.com/ga.js
Unequal sided Aluminium channels
Alloy 6060 (UNI 9006/1)
BxHxs gr/ml
10x5x1 50
10x15x1.5 130
10x20x2 248
12x6x2 108
12x10x2 151
12x20x2 259
15x10x1 89
15x10x2 165
10x20x1 130
15x20x2 275
20x8x1 92
20x10x1 103
20x10x2 194
20x15x2 225
20x30x2 410
25x10x2 231
25x12x2 385
25x15x2 275
25x20x1.5 251
25x20x2 330
BxHxs gr/ml
30x10x2 248
30x20x2 366
30x25x2 410
30x25x3 600
35x15x2 330
35x15x3 478
35x20x2 384
35x25x2 437
35x50x2 725
35x30x2 492
40x10x2 302
40x15x2 365
40x20x2 410
40x20x3 600
40x25x2 465
40x30x2 518
40x30x3 762
45x10x2 330
45x15x2 390
45x20x2 437
BxHxs gr/ml
45x30x2 545
50x10x2 356
50x20x2 464
50x25x2 518
50x25x3 761
50x25x4 994
50x30x2 572
50x30x3 858
50x35x2 627
50x40x2 680
55x20x2 491
60x10x2 410
60x10x3 600
60x15x2 464
60x20x2 518
60x25x3 850
60x30x3 923
60x40x2 734
60x40x4 1.426
65x15x2 492
BxHxs gr/ml
65x25x2.5 743
65x28x2 632
65x30x2 655
65x55x2.5 1.148
70x10x2 465
70x15x1.5 393
70x15x2 518
70x25x2 627
70x30x2 680
80x20x2 627
80x25x2 680
80x30x3 1.085
80x40x3 1.247
80x50x5 2.295
85x30x2 761
90x20x2 680
90x20x4 1.318
95x20x2 707
100x20x2 734
100x25x2 788
BxHxs gr/ml
100x40x3 1.410
100x50x5 2.565
120x20x2 843
120x60x10 5.940
140x30x5 2.565
150x30x2 1.112
200x40x3 2.219
200x100x10 10.260
240x50x8 6.998
CO.ME.F.I. metalli srl since 1947 - Tel: 011 64 74 089 - Fax: 011 68 13 911 - www.comefimetalli.it
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
http://localhost:8080/comefi/doc/b._setAccounthttp://localhost:8080/comefi/doc/b._trackPageviewhttp://localhost:8080/comefi/doc/text/javascripthttps://ssl/http://www/http://localhost:8080/comefi/doc/.google-analytics.com/ga.js
Equal sided Aluminium corners
Alloy 6060 (UNI 9006/1)
LxLxs gr/ml
10X10X1 53
15X15X1 78
20X20X1 105
30X30X1 159
10X10X1.5 80
15X15X1.5 115
20X20X1.5 156
25X25X1.5 196
30X30X1.5 240
35X35X1.5 278
40X40X1.5 319
10X10X2 97
15X15X2 154
20X20X2 205
25X25X2 265
30X30X2 320
35X35X2 375
40X40X2 421
50X50X2 530
60X60X2 638
LxLxs gr/ml
70X70X2 745
20X20X2.5 260
25X25X2.5 321
30X30X2.5 389
35X35X2.5 456
45X45X2.5 591
60X60X2.5 793
15X15X3 220
20X20X3 305
25X25X3 395
30X30X3 470
35X35X3 545
40X40X3 635
45X45X3 718
50X50X3 790
60X60X3 948
70X70X3 1.110
80X80X3 1.272
100X100X3 1.596
15X15X4 295
LxLxs gr/ml
20X20X4 400
25X25X4 505
30X30X4 616
35X35X4 713
40X40X4 850
45X45X4 929
50X50X4 1.080
60X60X4 1.253
80X80X4 1.685
30X30X5 755
35X35X5 905
40X40X5 1.013
50X50X5 1.282
60X60X5 1.552
80X80X5 2.092
30X30X6 875
40X40X6 1.198
50X50X6 1.522
60X60X6 1.847
70X70X6 2.171
LxLxs gr/ml
80X80X6 2.495
100X100X6 3.150
80X80X8 3.284
100X100X10 5.130
CO.ME.F.I. metalli srl since 1947 - Tel: 011 64 74 089 - Fax: 011 68 13 911 - www.comefimetalli.it
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
http://localhost:8080/comefi/doc/b._setAccounthttp://localhost:8080/comefi/doc/b._trackPageviewhttp://localhost:8080/comefi/doc/text/javascripthttps://ssl/http://www/http://localhost:8080/comefi/doc/.google-analytics.com/ga.js
Unequal sided Aluminium corners
Alloy 6060 (UNI 9006/1)
LxLxs gr/ml
10x5x1 38
10x6x1 42
12x6x1 47
15x10x1 65
20x10x1 79
10x5x1.5 55
15x10x1.5 95
20x10x1.5 116
20x15x1.5 138
25x10x1.5 135
25x15x1.5 156
30x10x1.5 156
30x15x1.5 178
30x20x1.5 196
35x10x1.5 180
35x20x1.5 216
40x15x1.5 217
40x20x1.5 237
50x20x1.5 285
50x30x1.5 330
LxLxs gr/ml
70x20x1.5 359
100x10x1.5 440
100x20x1.5 480
12x10x2 108
15x10x2 130
15x12x2 135
20x10x2 155
20x15x2 178
25x10x2 178
25x12x2 190
25x15x2 206
25x20x2 232
30x10x2 206
30x12x2 216
30x15x2 233
30x20x2 260
30x25x2 287
35x10x2 230
35x15x2 260
35x20x2 290
LxLxs gr/ml
35x25x2 313
40x10x2 260
40x15x2 290
40x20x2 320
40x25x2 340
40x30x2 367
45x20x2 340
50x15x2 340
50x20x2 375
50x25x2 400
50x30x2 422
50x40x2 476
60x15x2 297
60x20x2 422
60x30x2 475
60x40x2 530
65x15x2 421
70x15x2 450
70x20x2 475
70x30x2 527
LxLxs gr/ml
75x20x2 505
80x15x2 505
80x20x2 529
100x20x2 637
100x50x2 799
110x30x2 745
25x15x2.5 253
25x20x2.5 286
40x20x2.5 398
40x25x2.5 422
40x30x2.5 456
50x15x2.5 422
50x20x2.5 456
50x25x2.5 489
60x20x2.5 557
70x25x2.5 625
70x30x2.5 660
100x40x2.5 930
20x10x3 220
20x15x3 259
LxLxs gr/ml
25x15x3 300
25x20x3 340
30x10x3 300
30x15x3 340
30x20x3 380
30x25x3 421
35x15x3 380
35x20x3 421
35x25x3 465
40x15x3 430
40x20x3 465
40x25x3 500
40x30x3 555
45x30x3 583
50x10x3 465
50x20x3 545
50x25x3 583
50x30x3 624
60x15x3 585
60x20x3 624
LxLxs gr/ml
60x30x3 704
60x40x3 785
70x30x3 785
80x30x3 867
80x40x3 947
80x60x3 1.110
90x30x3 947
100x50x3 1.190
30x15x4 450
30x20x4 495
35x15x4 440
35x20x4 560
40x15x4 560
40x20x4 615
LxLxs gr/ml
40x20x5 745
50x25x5 945
50x30x5 1.015
55x25x5 1.015
60x30x5 1.148
60x40x5 1.285
60x50x5 1.420
80x40x5 1.552
100x50x5 1.957
30x20x6 715
60x40x6 1.522
80x40x6 1.846
115x65x6 2.818
75x50x7 2.230
LxLxs gr/ml
115x40x10 3.915
115x80x10 4.995
100x80x15 6.685
140x80x15 8.303
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
40x30x4 712
45x30x4 770
50x25x4 770
60x30x4 930
60x40x4 1.040
80x40x4 1.255
50x20x8 1.340
60x30x8 1.775
100x50x8 3.067
80x60x9 3.185
100x50x10 3.780
100x80x10 4.590
CO.ME.F.I. metalli srl since 1947 - Tel: 011 6474089 - Fax: 011 6813911 - www.comefimetalli.it
"T" profiles made of Aluminium
Alloy 6060 (UNI 9006/1)
BxHxs gr/ml
10x10x1.5 75
10x10x2 98
10x15x1.5 98
12x12x2 92
15x12x2 138
15x15x1.5 116
15x15x2 151
20x10x2 150
20x15x1.5 136
20x20x1.5 155
20x20x2 210
20x25x2 233
25x20x2 232
25x25x1.5 196
25x25x2 259
25x25x3 381
25x30x2 286
30x15x2 232
30x20x2 259
30x30x1.5 237
BxHxs gr/ml
30x30x2 313
30x30x3 465
35x35x1.5 280
35x35x2 367
40x15x2 286
40x20x2 313
40x40x2 421
40x40x3 624
40x40x4 821
50x50x2 530
50x50x4 1.037
60x60x4 1.253
60x60x6 1.847
70x20x3 705
70x50x3 948
90x50x2 746
100x60x5 2.093
100x100x10 5.130
CO.ME.F.I. metalli srl since 1947 - Tel: 011 64 74 089 - Fax: 011 68 13 911 - www.comefimetalli.it
Thanks to the production of aluminium profiles, CO.ME.F.I. Metalli can provide the best solutions for the architectural and construction requirements that have determined the evolution oftechnologies applied in this sector.
Our aluminium duraluminium profiles are characterised by the precision of the sizes and measurements, by the lack of any work residues, by a material quality and by their durability in time that willsatisfy even the most demanding clients.
Do not hesitate to contact our call centres: you will be provided with all the information so that you will get to know the detailed characteristics of each aluminium profile and evaluate the quality of ourproducts.
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
http://localhost:8080/comefi/doc/b._setAccounthttp://localhost:8080/comefi/doc/b._trackPageviewhttp://localhost:8080/comefi/doc/text/javascripthttps://ssl/http://www/http://localhost:8080/comefi/doc/.google-analytics.com/ga.js
Aluminium profiles catalogue
Borders
Fishplate
CO.ME.F.I. Metalli produces and sales various typologies of aluminium profiles characterised by high quality, thanks to an advanced production technology that guarantees a strong specialisation in theproduction of extrusions and profiles for the requirements of the modern industry
The production of aluminium based alloys represents a real possibility for the industry to trust easy but highly resistant materials, ideal solutions for the execution of highly resistant structures.
Our extruded and anodised aluminium profiles have a large application in a market continuously evolving, where the material excellence and their structural characteristics are always in demand.Thanks to the technology employed, in the company's laboratories all base designs are put into matrices that represent the starting point for the creation of commercial aluminium profiles that agrowing clientele is looking for all over the country.
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
Building stage platforms made of Aluminium
Alloy 6060 (UNI 9006/1)
CO.ME.F.I. metalli srl since 1947 - Tel: 011 64 74 089 - Fax: 011 68 13 911 - www.comefimetalli.it
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
The CO.ME.F.I. Metalli production includes a large and varied range of building stage platforms. Aluminium product of different sizes and typologies in order to meet various demands from theconstruction sector
Learn more about the technical data for each product or request further details by contacting our offices. Great opportunities of customisation for specific needs are available.
http://localhost:8080/comefi/doc/b._setAccounthttp://localhost:8080/comefi/doc/b._trackPageviewhttp://localhost:8080/comefi/doc/text/javascripthttps://ssl/http://www/http://localhost:8080/comefi/doc/.google-analytics.com/ga.js
Modules
CO.ME.F.I. metalli srl since 1947 - Tel: 011 64 74 089 - Fax: 011 68 13 911 - www.comefimetalli.it
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
The aluminium modular profiles are employed in various industrial sectors. Learn more about the details for each product; get information regarding the sizes and the characteristics.
Find inside the catalogue all the details regarding the photovoltaic module and other particular elements: screws, plugs, bushes, copper, plates, allen screws and many others.
The strength of CO.ME.FI. Metalli resides in the extensive experience that allows it to provide the clients with high quality solutions and characterised by a high degree if customisation.
Brass round tubesOT 63 (UNI 4892)
Dxs gr/ml
5X0,5 0,060
6X0,5 0,073
8X0,5 0,100
10X0,5 0,127
12X0,5 0,153
14X0,5 0,180
16X0,5 0,207
18X0,5 0,234
20X0,5 0,260
21X0,5 0,274
22X0,5 0,287
24X0,5 0,314
25X0,5 0,327
26X0,5 0,340
27X0,5 0,354
28X0,5 0,367
30X0,5 0,394
32X0,5 0,420
34X0,5 0,447
36X0,5 0,473
Dxs gr/ml
38X0,5 0,500
40X0,5 0,527
42X0,5 0,553
44X0,5 0,594
6X1 0,133
8X1 0,187
10X1 0,240
12X1 0,294
14X1 0,347
16X1 0,400
18X1 0,454
20X1 0,507
22X1 0,561
24X1 0,614
26X1 0,668
28X1 0,721
30X1 0,774
32X1 827
34X1 0,880
36X1 0,934
Dxs gr/ml
38X1 0,987
40X1 1,041
42X1 1,094
44X1 1,147
46X1 1,201
48X1 1,254
50X1 1,309
52X1 1.361
54X1 1,414
56X1 1,467
58X1 1,521
60X1 1,575
65X1 1,709
70X1 1,842
80X1 2,108
8X1,5 0,260
10X1,5 0,340
12X1,5 0,420
14X1,5 0,501
16X1,5 0,581
Dxs gr/ml
18X1,5 0,662
20X1,5 0,741
22X1,5 0,821
25X1,5 0,941
28X1,5 1,061
30X1,5 1,140
32X1,5 1,221
35X1,5 1,342
40X1,5 1,542
45X1,5 1,742
50X1,5 1,943
60X1,5 2,343
70X1,5 2,744
80X1,5 3,144
8X2 0,320
10X2 0,427
12X2 0,534
14X2 0,641
16X2 0,748
18X2 0,854
Dxs gr/ml
20X2 0,961
22X2 1,068
24X2 1,175
25X2 1,228
26X2 1,282
28X2 1,389
30X2 1,495
32X2 1,601
38X2 1,926
40X2 2,029
42X2 2,135
45X2 2,301
50X2 2,564
60X2 3,097
70X2 3,630
80X2 4,166
15X2,5 0,834
18X2,5 1,035
20X2,5 1,168
24X2,5 1,435
Dxs gr/ml
30X2,5 1,836
35X2,5 2,170
40X2,5 2,503
45X2,5 2,837
50X2,5 3,171
55X2,5 3,504
60X2,5 3,839
65X2,5 4,173
70X2,5 4,505
75X2,5 4,840
80X2,5 5,174
90X2,5 5,841
Dxs gr/ml
150X2,5 9,843
160X2,5 10,500
180X2,5 11,849
CO.ME.F.I. Metalli is a company that has been operation for more than sixty years in the filed of works and sale of non-ferrous metals.
Both in the creation of brass sections and in the creation of tubes, bars and plates of other non-ferrous materials, the CO.ME.F.I. Metalli is characterised by the ability to propose to its clients thesolutions of high qualitative level, together with reliability that has been accompanying the company since it was established in 1947. Thanks to such an extensive experience in the sector, the offeredproducts and services manage to satisfy to a great extent the most varied requirements, guaranteeing at the same time quality and convenience for any brass tube or bar provided to the clients.
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
95X2,5 6,175
100X2,5 6,508
110X2,5 7,176
115X2,5 7,402
120X2,5 7,837
125X2,5 8,20
130X2,5 8,517
140X2,5 9,180
Brass rectangular tubesOT 63 (UNI 4892)
Lxlxs gr/ml
10X6X1 0,240
15X6X1 0,325
15X8X1 0,340
20X8X1 0,447
15X10X1 0,426
20X10X1 0,479
25X10X1 0,555
30X10X1 0,660
40X10X1 0,810
20X15X1 0,585
25X15X1 0,660
30X15X1 0,740
40X15X1 0,935
50X15X1 1,105
30X20X1 0,825
15X10X1,5 0,561
20X10X1,5 0,688
25X10X1,5 0,816
30X10X1,5 0,943
35X10X1,5 1,071
Lxlxs gr/ml
40X10X1,5 1,198
50X10X1,5 1,453
20X15X1,5 0,816
25X15X1,5 0,943
30X15X1,5 1,071
40X15X1,5 1,229
50X15X1,5 1,504
50X25X1,5 1,836
60X30X1,5 2,218
80X30X2 3,700
80X40X2 3,944
100X50X2 5,100
Brass square tubesOT 63 (UNI 4892)
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
LxLxs gr/ml
8X8X1 0,240
10X10X1 0,309
12X12X1 0,386
14X14X1 0,460
15X15X1 0,496
16X16X1 0,535
18X18X1 0,610
20X20X1 0,686
22X22X1 0,760
25X25X1 0,868
30X30X1 1,048
32X32X1 1,120
35X35X1 1,218
40X40X1 1,345
45X45X1 1,510
50X50X1 1,670
10X10X1,5 0,433
12X12X1,5 0,535
20X20X1,5 1,020
25X25X1,5 1,270
LxLxs gr/ml
30X30X1,5 1,530
35X35X1,5 1,746
40X40X1,5 2,030
50X50X1,5 2,550
60X60X1,5 2,980
80X80X1,5 4,080
20x20x2 1,294
25x25x2 1,564
30x30x2 1,904
Brass channelsOT 58 (UNI 12167)
Equal sided
BxHxs gr/ml
10X10X1 0,240
12X12X1 0,290
15X15X1 0,365
18X18X1,5 0,650
10X10X2 0,440
12X12X2 0,545
15X15X2 0,697
20X20X2 0,952
30X30X2 1,445
40X40X2 1,972
Large based
BxHxs gr/ml
18X8X1,5 0,369
20X10X1,5 0,472
25X15X1,5 0,663
30X15X1,5 0,727
20X10X2 0,610
20X15X2 0,782
25X15X2 0,860
40X15X2 1,150
40X20X2 1,292
30X20X2,5 1,370
60X25X2,5 2,232
50X30X2,5 2,232
Narrow based
BxHxs gr/ml
8X15X1,5 0,447
10X15X1,5 0,472
10X20X1,5 0,600
12X20X1,5 0,620
12X30X1,5 0,880
18X30X1,5 0,950
10X15X2 0,610
10X20X2 0,780
15X20X2 0,870
15X25X2 1,040
15X30X2 1,207
15X35X2 1,340
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
Brass round barsWire drawn OT 58 (UNI 12164)) up to 60Extruded OT 58 (UNI 12165) of 65
D gr/ml
5 0,167
6 0,240
7 0,327
8 0,428
9 0,542
10 0,669
12 0,963
15 1,502
16 1,709
18 2,163
19 2,410
20 2,670
22 3,231
24 3,845
25 4,173
26 4,513
27 4,867
28 5,234
29 5,614
30 6,010
D gr/ml
31 6,416
32 6,835
33 7,270
34 7,720
35 8,180
36 8,652
37 9,139
38 9,639
39 10,154
40 10,684
41 11,222
42 11,776
43 12,344
44 12,924
45 13,518
46 14,126
47 14,749
48 15,385
49 16,028
50 16,690
D gr/ml
52 18,042
55 20,196
60 24,033
65 28,211
70 32,716
80 42,729
85 48,237
90 54,077
95 60,256
100 66,767
110 80,784
120 96,143
130 112,837
140 130,781
145 140,456
150 150,131
155 163,565
160 176,00
180 223,00
200 275,00
D gr/ml
250 415,00
Brass square barsWire drawn OT 58 (UNI 12164) up to 60X60Extruded OT 58 (UNI 12165) of 70X70
L gr/ml
4 0,136
5 0,212
6 0,306
7 0,416
8 0,544
9 0,688
10 0,849
L gr/ml
30 7,652
35 10,420
40 13,600
45 17,290
50 21,250
60 30,600
70 61,650
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
11 1,027
12 1,224
13 1,437
14 1,666
15 1,912
16 2,177
17 2,456
18 2,754
20 3,400
22 4,114
23 4,497
25 5,313
28 6,663
80 54,400
90 68,850
100 85,00
120 123,00
Brass flat barsOT 58 (UNI 12167)
Lxs gr/ml
8X2 0,136
10X2 0,170
12X2 0,204
15X2 0,255
18X2 0,306
20X2 0,340
22X2 0,374
25X2 0,424
30X2 0,510
35X2 0,595
40X2 0,680
50X2 0,850
60X2 1,020
70X2 1,190
80X2 1,360
90X2 1,530
10X3 0,255
12X3 0,306
15X3 0,382
18X3 0,459
Lxs gr/ml
20X3 0,510
22X3 0,561
25X3 0,637
30X3 0,765
35X3 0,893
40X3 1,020
45X3 1,148
50X3 1,275
60X3 1,530
70X3 1,785
80X3 2,040
90X3 2,295
100X3 2,550
8X4 0,272
10X4 0,340
12X4 0,408
15X4 0,510
18X4 0,612
20X4 0,680
25X4 0,851
Lxs gr/ml
30X4 1,020
35X4 1,190
40X4 1,360
50X4 1,700
60X4 2,040
70X4 2,380
80X4 2,720
90X4 3,060
100X4 3,400
10X5 0,425
12X5 0,510
15X5 0,637
18X5 0,765
20X5 0,850
25X5 1,062
30X5 1,275
35X5 1,488
40X5 1,700
45X5 1,913
50X5 2,125
Lxs gr/ml
60X5 2,550
70X5 2,975
80X5 3,400
90X5 3,825
100X5 4.250
120X5 5,100
10X6 0,510
12X6 0,612
15X6 0,765
18X6 0,918
20X6 1,020
22X6 1,122
25X6 1,275
30X6 1,530
40X6 2,040
50X6 2,550
60X6 3,060
70X6 3,570
80X6 4,080
90X6 4,590
Lxs gr/ml
100X6 5,100
120X6 6,120
10X8 0,681
12X8 0,816
15X8 1,020
20X8 1,360
25X8 1,700
30X8 2,040
35X8 2,380
40X8 2,720
50X8 3,400
60X8 4,080
70X8 4,760
80X8 5,440
90X8 6,120
100X8 6,800
120X8 8,160
150X8 10,200
12X10 1,020
15X10 1,275
Lxs gr/ml
20X10 1,700
Lxs gr/ml
20X15 2,550
Lxs gr/ml
50X30 12,700
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
25X10 2,125
30X10 2,550
40X10 3,400
50X10 4,250
60X10 5,100
70X10 5,950
80X10 6,800
90X10 7,650
100X10 8,500
120X10 10,200
150X10 12,750
200X10 17,00
20X12 2,040
30X12 3,060
40X12 4,080
50X12 5,100
60X12 6,120
80X12 8,160
100X12 10,200
30X15 3,825
40X15 5,100
50X15 6,375
60X15 7,650
80X15 10,200
100X15 12,750
120X15 15,300
150X15 19,130
30X20 5,100
40X20 6,800
50X20 8,500
60X20 10,200
70X20 11,900
80X20 13,600
90X20 15,300
100X20 17,00
120X20 20,400
150X20 25,500
40X30 10,200
60X30 15,300
80X30 20,400
100X30 25,500
150X30 38,250
50X40 17,000
60X40 20,400
80X40 27,200
90X40 30,600
100X40 34,000
120X40 39,900
60X50 25,500
70X50 29,750
80X50 34,000
100X50 42,500
Brass hexagonal barsWire drawn OT 58 (UNI 12164) up to 60Extruded OT 58 (UNI 12165) of 65
CH gr/ml
5 0,184
6 0,265
7 0,361
8 0,481
9 0,596
10 0,736
11 0,890
12 1,062
13 1,245
14 1,444
15 1,656
16 1,886
17 2,128
18 2,387
20 2,946
21 3,250
CH gr/ml
26 4,978
27 5,370
28 5,750
29 6,190
30 6,630
31 7,080
32 7,529
33 8,020
34 8,512
35 9,020
36 9,530
38 10,610
40 11,760
42 12,970
45 14,890
50 18,380
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
22 3,565
23 3,897
24 4,243
25 4,603
60 26,470
70 36,065
Equal sided brass cornersOT 58 (UNI 12167)
LxLxs gr/ml
8X8X1 0,127
10X10X1 0,161
12X12X1 0,195
15X15X1 0,246
15X15X1,5 0,357
20X20X1,5 0,490
18X18X2 0,578
20X20X2 0,646
22X22X2 0,714
25X25X2 0,816
30X30X2 0,986
40X40X2 1,326
50X50X2 1,666
60X60X2 2,000
15X15X3 0,688
25X25X3 1,200
30X30X3 1,450
35X35X3 1,710
40X40X3 1,963
45X45X3 2,190
LxLxs gr/ml
50X50X3 2,473
60X60X3 3,060
20X20X4 1,550
25X25X4 1,564
30X30X4 1,904
35X35X4 2,244
40X40X4 2,584
45X45X4 2,924
50X50X4 3,260
20X20X2 1,480
25X25X2 1,900
30X30X2 2,310
40X40X2 3,187
50X50X2 4,037
60X60X2 4,800
45X45X3 2.218
50X50X4 3,264
Unequal sided brass cornersOT 58 (UNI 12167)
LxLxs gr/ml
10X5X1,5 0,172
15X10X1,5 0,300
20X10X1,5 0,360
LxLxs gr/ml
50X20X2 1,156
50X25X2 1,241
15X10X3 0,561
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
25X15X1,5 0,490
15X10X2 0,391
20X10X2 0,476
25X10X2 0,561
30X10X2 0,646
35X10X2 0,722
40X10X2 0,816
20X15X2 0,561
25X15X2 0,641
30X15X2 0,731
35X15X2 0,806
40X15X2 0,900
50X15X2 1,070
25X20X2 0,731
30X20X2 0,816
35X20X2 0,900
40X20X2 0,986
20X10X3 0,680
30X10X3 0,940
20X15X3 0,816
25X15X3 0,943
30X15X3 1,071
30X20X3 1,198
35X20X3 1,326
40X20X3 1,453
50X25X3 1,836
60X30X3 2,220
30X15X4 1,462
40X20X4 1,904
80X40X4 3,950
25X20X6 1,990
Brass half roundWire drawn OT 58 (UNI 12164)
Codice AxB grxml
5442/O 10x3 0,235
6102/O 30x3 0,640
5472/O 18x4 0,605
5469/O 15x5 0,465
5478/O 20x5 0,650
6225/O 25x5 0,900
5448/O 20x10 1,380
6099/O 25x12,5 2,160
Brass sheet metal platesAvailable: OT 67 (UNI 1652)OT 59 (UNI 5706) timing mechanism only in the format 1340x670
1340x670 gr/ml
0,10 0,760
0,20 1,526
8,00 61,050
10,00 76,313
12,00 91,580
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
0,30 2,289
0,40 3,052
0,50 3,815
0,60 4.578
0,70 5,342
0,80 6,105
0,90 6,898
1,00 7,631
1,20 9,157
1,50 11,447
1,80 13,776
2,00 15,262
2,50 19,078
3,00 22,893
3,50 26,709
4,00 30,525
5,00 38,156
6,00 45,787
2000x1000 gr/ml
0,50 8,50
0,60 10,20
0,80 13,60
1,00 17,00
1,20 20,40
1,50 25,50
2,00 34,00
2,50 42,50
3,00 51,00
4,00 68,00
5,00 85,00
6,00 102,00
8,00 136,00
10,00 170,00
Brass drawing profiles
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
http://localhost:8080/comefi/doc/b._setAccounthttp://localhost:8080/comefi/doc/b._trackPageviewhttp://localhost:8080/comefi/doc/text/javascripthttps://ssl/http://www/http://localhost:8080/comefi/doc/.google-analytics.com/ga.js
Copper round tubesUNI 5649-65
Up to size 16 x 1 we deliver rolled annealed copper as well.
Dxs gr/ml
6X1 0,140
7X1 0,168
8X1 0,195
9X1 0,223
10X1 0,251
12X1 0,308
14X1 0,363
15X1 0,391
16X1 0,416
18X1 0,475
20X1 0,531
22X1 0,587
25X1 0,670
28X1 0,753
30X1 0,809
32X1 0,878
35X1 0,950
40X1 1,089
42X1 1,130
45X1 1,228
Dxs gr/ml
50X1 1,369
10X1.5 0,356
12X1.5 0,440
14X1.5 0,524
16X1.5 0,565
18X1.5 0,692
22X1.5 0,860
28X1.5 1,116
35X1.5 1,411
40X1.5 1,613
42X1.5 1,705
50X1.5 2,042
54X1.5 2,211
60X1.5 2,463
64X1.5 2,625
76X1.5 3,137
20X2 1,008
54X2 2,919
76X2 4,155
89X2 4,844
Copper round barsUNI 5649-65
D gr/ml
3 0,063
4 0,112
5 0,175
6 0,252
7 0,343
8 0,448
D gr/ml
32 7,168
35 8,575
40 11,200
45 14,175
50 17,500
55 21,150
CO.ME.F.I. Metalli realizes a varied range of copper sections, solutions designed to satisfy the requirements of sectors such as constructions and various other industrial media.
On this page are listed all the sizes available for bars, tubes and copper plates. For more detailed information, consult the data sheets for each product or contact our offices.
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
9 0,566
10 0,700
11 0,846
12 1,008
13 1.183
14 1,373
15 1,575
16 1,792
18 2,268
20 2,800
22 3,388
25 4,375
28 5,488
30 6,300
60 25,132
65 29.500
70 34,195
75 39,300
80 44,66
85 50,50
90 56,52
100 69,78
110 85,20
120 101,20
150 158,40
Copper square barsUNI 5649-65
L gr/ml
10x10 0,890
15x15 2,002
20x20 3,560
25x25 5,562
30x30 8,010
35x35 10,500
40x40 14,240
50x50 22,240
60x60 32,250
80x80 56,900
100x100 90,00
120x120 128,16
Copper flat barsUNI 5649-65
Lxs gr/ml
10x2 0,178
Lxs gr/ml
25x5 1,110
Lxs gr/ml
30x8 2,140
Lxs gr/ml
30x12 3,200
Lxs gr/ml
100x20 17,800
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
15x2 0,267
20x2 0,356
30x2 0,533
40x2 0,711
10x3 0,267
15x3 0,400
20x3 0,534
30x3 0,800
40x3 1,070
50x3 1,340
10x4 0,356
15x4 0,534
20x4 0,712
30x4 1,070
40x4 1,420
50x4 1,780
10x5 0,445
15x5 0,667
20x5 0,890
30x5 1,340
40x5 1,780
50x5 2,230
60x5 2,670
80x5 3,650
100x5 4,450
15x6 0,800
20x6 1,070
25x6 1,340
30x6 1,600
35x6 1,869
40x6 2,140
50x6 2,670
60x6 3,200
80x6 4,170
100x6 5,340
15x8 1,070
20x8 1,420
25x8 1,780
40x8 2,850
50x8 3,560
60x8 4,270
80x8 5,680
100x8 7,120
15x10 1,340
20x10 1,780
25x10 2,230
30x10 2,670
40x10 3,560
50x10 4,450
60x10 5,340
70x10 6,230
80x10 7,120
100x10 8,900
120x10 10,700
150x10 13,400
200x10 17,800
25x12 2,670
40x12 4,270
50x12 5,340
60x12 6,400
80x12 8,540
100x12 10,680
120x12 12,840
30x15 4,00
40x15 5,340
50x15 6,680
60x15 8,010
80x15 10,700
100x15 13,400
150x15 20,00
200x15 26,700
30x20 5,33
40x20 7,110
50x20 8,890
60x20 10,700
80x20 14,200
120x20 21,400
150x20 26,800
200x20 35,600
50x30 13,340
60x30 16,200
80x30 21,400
100x30 26,700
120x30 32,100
150x30 40,200
200x30 53,400
80x40 28,800
100x40 36,00
120x40 43,200
200x40 71,200
100x50 45,00
150x50 67,500
200x50 89,00
Spigoli Raggiati
Lxs gr/ml
20x30
30x3 0,515
20x4 0,712
30x4 1,099
20x5 0,860
30x5 1,287
20x6 1,070
30x6 1,533
50x6 2,601
80x6 4,170
40x8 2,725
60x8 4,150
80x8 5,580
100x10 0,712
120x10 8,708
150x10 10,488
100x15 13,050
10x5 13,200
Copper sheet metal platesUNI 5649-65
Annealedgr/ml
2000x1000x0.4 7,112
2000x1000x0.5 8,890
2000x1000x0.6 10,668
2000x1000x0.8 14,224
2000x1000x1 17,780
2000x1000x1.2 21,336
2000x1000x1.5 26,670
2000x1000x2 35,560
2000x1000x2.5 44,450
2000x1000x3 53,340
2000x1000x4 71,120
Raw gr/ml
2000x1000x0.4 7,112
2000x1000x0.5 8,890
2000x1000x0.6 10,668
2000x1000x0.8 14,224
2000x1000x1 17,780
2000x1000x1.2 21,336
2000x1000x1.5 26,670
2000x1000x2 35,560
2000x1000x2.5 44,450
2000x1000x3 53,340
2000x1000x4 71,120
2000x1000x5 88,900
2000x1000x6 106,680
2000x1000x8 142,240
CO.ME.F.I. metalli srl since 1947 - Tel: 011 64 74 089 - Fax: 011 68 13 911 - www.comefimetalli.it
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
http://localhost:8080/comefi/doc/b._setAccount
http://localhost:8080/comefi/doc/b._trackPageviewhttp://localhost:8080/comefi/doc/text/javascript
https://ssl/
http://www/http://localhost:8080/comefi/doc/.google-analytics.com/ga.js
Bronze round barsAvailable in 85.5.55 - Bronze mechanical (Uni7013/8)G-Cu-Sn12 - BronzeB14 (Uni7013/2)G-CuAl11Fe4Ni4 - Aluminium bronze (Uni5275)
Diameter gr/ml
15 157
18 226
20 279
22 338
25 436
30 629
32 715
35 856
40 1.118
45 1.415
50 1.747
55 2.114
60 2.516
65 2.953
70 3.425
75 3.931
80 4.473
85 5.050
90 5.661
95 6.308
Diameter gr/ml
100 6.990
105 7.706
110 8.458
115 9.243
120 10.065
125 10.970
130 11.813
135 12.725
140 13.710
145 1.477
150 15.730
160 17.890
170 20.200
180 22.647
190 25.234
200 27.960
210 30.826
220 33.831
230 36.977
240 40.262
Diameter gr/ml
250 43.687
260 47.252
270 50.957
280 54.800
290 58.790
300 62.910
Bronze square barsAvailable in 85.5.55 - Bronze mechanical (Uni7013/8)G-Cu-Sn12 - BronzeB14 (Uni7013/2)
LxL gr/ml
25x25 5.40
30x30 7.70
40x40 13.70
50x50 21.50
60x60 30.90
Bronze is an alloy between copper and another type of metal that such as tin, Aluminium, Nickel, Beryllium. Such alloy is characterised by a good resistance to corrosion and it is very valued for highworkability characteristics in the processing of laminates, printings and drawn products. CO.ME.F.I. Metalli embodies a long experience in bronze processing and other non-iron metals, offering to theclients a series of high quality products and services with convenient opportunities regarding customisation.
CO.ME.F.I. has been operating for more than half a century in the processing of non-iron metals, an activity that includes the sale of bronze profiles as well, characterised by high quality and reliability.Furthermore, our clients can count on the constant technical support.
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
70x70 42.15
80x80 55.00
90x90 69.60
100x100 86.00
110x110 106.48
Bronze perforated bars
We can deliver bronze perforated bars on demand, stating with size 30 x 15 up to size 240 x 200.
Main characteristics of bronze alloys
Designation Alloy Cu Al Sn Zn Pb Fe Mn Ni Rm Rp A% HB
B. mechanical 85.555 1 4-6 3-4 3-3.6 0.25 - 0.5 25/30 8/12 14/20 65/80
B. B14 CuSn12 1 11-13 0.5 1 0.2 0.2 0.7 27/32 15/17 6/10 100/120
Xantal CuAl11Fe4Ni4 78-84 10-11.5 0.15 0.15 0.1 3-5 - 3-5.5 70/80 35/45 8/14 180/230
CO.ME.F.I. metalli srl since 1947 - Tel: 011 64 74 089 - Fax: 011 68 13 911 - www.comefimetalli.it
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
The technical data included in this catalogue are indicative and for guidance only.CO.ME.FI. Metalli srl reserves the right to make changes at any time for the improvement of the product.
http://localhost:8080/comefi/doc/b._setAccounthttp://localhost:8080/comefi/doc/b._trackPageviewhttp://localhost:8080/comefi/doc/text/javascripthttps://ssl/http://www/http://localhost:8080/comefi/doc/.google-analytics.com/ga.js
Orbital road towards Milan, exit VENARIA, follow immediately to the right to "Juventus stadium" and then "DRUENTO". You come to C.so Cuneo; take the second left to reach C.so Vercelli, 13.
From Milan, exit "VENARIA", at the first intersection turn right on Garibaldi str. Go straight until the intersection of the Stadio delle Alpi, then turn right on Druento Str. As soon as possible follow take the second right to reach C.so Vercelli, 13.