catalogue 2019 - 2020 · premier application application our laser welded diamond blade are made of...

BSP TOOLS (KUNSHAN) CO.,LTD.

BSP TOOLS (KUNSHAN) CO.,LTDNo.275,Shengfan Road., Kunshan City, Jiangsu,P.R.China.215300Tel:+86-512-36694195Fax:+86-512-36888121

SHANGHAI OFFICEUnit 506, No. 1905 Hongmei Rd., Shanghai, P.R.China 200233Tel.: +86 21 6440 1165Fax.: +86 21 6485 0944Email.: [email protected] Website: www.bsptools.com

BSP TOOLS (KUNSHAN) CO.,LTD.

CATALOGUE 2019 - 2020BSP TOOLS (KUNSHAN) CO.,LTD

Cutting Laser welded dry cutting disc for general purposeSintered diamond blade by hot pressedSintered diamond blade by cold pressedDiamond wall chaser bladeDiamond blade for brick/table sawDiamond blade for hand saw Walk behind sawWall saw bladeDiamond blade for stonePackages for diamond blade

Drilling Wet diamond core bitDiamond segment for retippingAdaptors and accessories for wet diamond core bitDry diamond core bitAdaptors and accessories for dry diamond core bitStone/Tile/Glass diamond core bit

Vacuum Brazed Diamond productsVacuum Brazed Drill bitVacuum Brazed Diamond Saw BladeVacuum Brazed Diamond Cup Wheel

Grinding Hand held grinding cup wheel for general purpose Professional diamond grinding cup wheel Coating removal diamond cup wheelTrapezoid Grinding PlatePCD Coating Removal Plate and Adapter Plate Professional diamond floor grinding plateDiamond plug

Diamond Wire SawDiamond Wire Saw For Granite QuarryingDiamond Wire Saw For Marble QuarryingDiamond Wire Saw For Block DressingDiamond Wire Saw For ProfilingDiamond Wire Saw For Reinforced concreteMulti-Wire Saw For Slab CuttingVacuum Brazed Diamond Wire Saw Beads For Reinforced concreteVacuum Brazed Diamond Wire Beads For Marble

020306101214 15171920

222630333738

424851

5356596062 6364

6667697071727374

Diamond tools information

HIgh-pressure/temperature method Under high pressure and temperature the segments are bonded in large press moulds directly to the core. The beneficial keyed bond guarrantees a high safety against loss of segments.

Brazing blade/core bitBrazing is used in particular for large sizes blade and diamond core bit, it is suitable for wet cutting.

The used symbols

Different methods for joining segments to the high-quality steel core

Tools Processed materials

CURED CONCRETE

GRANITE

CLAY

BRICK

BLOCK

FRESH CONCRETE

PVC

S

MARBLE

ASPHALT

REINFORCED CONCRETE

TILE

Sintered blades Cutting edge covers (segmented, turbo, continous rim) are directly sintered to the steel core; the cover is bonded to the core through heat and permanent pressure

Laser blades/core bitLaser welding is used in particular for dry cutting blade and dry core bit. Can work under high temperature, with very high welding strength.

PROTECTIVE GLASSES

HEARING PROTECTION PROTECTIVE GLOVES

DUST MASK

WET & DRYWET

BRAZED LASER WELDED

DUCTILE IRON H/HP WALK BEHIND

CIRCULAP SAW

ANGLE GRINDER

HAND HELD DRILL

CHOP SAWHAND HELD H/S

TABLE SAW

MASONRYL/HP WALK BEHIND

CORE RIG

TILE

Cutting

* General purpose material* Reinforced concrete* Masonry and brick* Abrasive material

Sintered diamond blade by hot pressed

* General purpose material* Reinforced concrete* Masonry and brick* Asphalt and refractory material* Abrasive material

C-Professional laser welded dry disc

Hard bond.

High diamond concentration. Good diamond grade. Good wear resistance, good lifespan. Can provide very good performance especially when cutting on abrasive material. Similar performance as standard quality disc when cutting on reinforced concrete, but price is higher.

Laser welded diamond blade

Application

PREMIER+

PREMIER

Application

Application

Our laser welded diamond blade are made of good metal bond with high quality diamond grit. Suitable for free cutting and dry cutting on general purpose material, masonry material, stone and abrasive material and so on.

* General purpose material* Reinforced concrete* Masonry and brick* Asphalt and refractory material

105mm115mm125mm150mm180mm230mm

Outer diameter Segment Size31.5×2.4×1031.5×2.4×1031.5×2.4×1031.5×2.4×1033×2.6×10

38.5×2.6×10



38.5×2.6×10



38.5×2.6×10

STANDARD+

Laser welded dry cutting disc for general purpose

Application＊ Natural and artificial stone＊ Concrete＊ Building material

Turbo sintered diamond blade

Turbo continuous rim for fast and clean cutting

Application＊ Natural and artificial stone＊ Concrete ＊ Building material

Fine turbo sintered diamond blade

Turbo continuous rim for fast and clean cutting

Diameter

105 (4″)110 (4 3/8″)115 (4.5″)125 (5″)150 (6″)180 (7″)200 (8″)230 (9″)250 (10″)300 (12″)350 (14″)

Seg.H Seg.T

8/108/108/108/108/108/108/108/108/108/108/10

2.02.02.02.22.22.42.42.62.83.23.2

Diameter

105 (4″)110 (4 3/8″)115 (4.5″)125 (5″)150 (6″)180 (7″)200 (8″)230 (9″)250 (10″)300 (12″)350 (14″)

Seg.H Seg.T

88888888888

2.02.02.02.22.22.42.42.62.83.23.2

0302

Turbo fine cut sintered diamond blade

Premium T-Seg turbo diamond blade


Super thin with fine turbo for a very fast cut, clean edge and dust reduction


Application＊ Natural and artificial stone＊ Hard artificial stone＊ Ceramics

Application＊ Granite＊ Natural and artificial stone ＊ �Reinforced concrete＊ Roof-tile ＊ �Building material

Special T-Segment offers built-in core protection, Turbo style serrated segments give a fast cutting on concrete and masonry

Diameter

105 (4″)110 (4 3/8″)115 (4.5″)125 (5″)150 (6″)180 (7″)200 (8″)230 (9″)250 (10″)300 (12″)350 (14″)

Seg.H Seg.T

88888888888

1.21.2

1.3 / 1.41.41.61.61.81.8

2.1 / 2.22.2 / 2.4

2.4

Diameter

105 (4″)115 (4.5″)125 (5″)150 (6″)180 (7″)230 (9″)

Seg.H Seg.T

888888

2.02.02.22.22.42.6

Tornado turbo diamond blade

Segmented turbo diamond blade

Application＊ Granite＊ Natural and artificial stone ＊ Aggregated concrete＊ Reinforced concrete＊ Roof-tile＊ Building material

Turbo segment with core protection for very fast and easy cutting, also very good on dry cutting

Application＊ Natural and artificial stone＊ Reinforced concrete ＊ Roof tiles＊ Drywall＊ Ceramics ＊ Aggregated concrete ＊ Granite

Powerful turbo segments, Considerable reduction on noise, self-cooling when dry cutting, very long service life

Diameter

105 (4″)115 (4.5″)125 (5″)150 (6″)180 (7″)200 (8″)230 (9″)250 (10″)300 (12″)350 (14″)

Seg.H Seg.T

8888888888

2.02.02.22.22.42.42.62.83.23.2

Diameter

105 (4″)350 (14″)400 (16″)

Seg.H Seg.T

81515

2.03.23.6

0504

Sintered diamond blade by cold pressed Sintered diamond blade by cold pressed

Sintered blade by cold pressed for DIY marketPremier gradeApplication:

Item Picture Size

* * * * *Construction materials

Brickwork

Concrete

Reinforced concrete

Natural stone

* * * * ** * * * ** * * ** * * *

105x20x7115x22.23x7125x22.23x7150x22.23x7180x22.23x7230x22.23x7

105x20x10115x22.23x10125x22.23x10150x22.23x10180x22.23x10230x22.23x10

Segmented blade

For use on electric circular saw and angle grinder.

Excellent performance on hard construction material, reinforced concrete, brick, stone.

105x20x7115x22.23x7125x22.23x7150x22.23x7180x22.23x7230x22.23x7

105x20x10115x22.23x10125x22.23x10150x22.23x10180x22.23x10230x22.23x10

Turbo blade


Excellent performance on hard construction material, reinforced concrete, brick, stone.

105x20x5115x22.23x5125x22.23x5150x22.23x5180x22.23x5230x22.23x5

105x20x7115x22.23x7125x22.23x7150x22.23x7180x22.23x7230x22.23x7

Continuous rim blade


Smooth cutting on variety tile, masonry and stone.

Sintered blade by cold pressed for DIY marketStandard gradeApplication:

105x20x7115x22.23x7125x22.23x7150x22.23x7180x22.23x7230x22.23x7

105x20x10115x22.23x10125x22.23x10150x22.23x10180x22.23x10230x22.23x10

105x20x7115x22.23x7125x22.23x7150x22.23x7180x22.23x7230x22.23x7

105x20x10115x22.23x10125x22.23x10150x22.23x10180x22.23x10230x22.23x10

105x20x5115x22.23x5125x22.23x5150x22.23x5180x22.23x5230x22.23x5

105x20x7115x22.23x7125x22.23x7150x22.23x7180x22.23x7230x22.23x7

Item Picture Size

Segmented blade

Turbo blade


* * * *Construction materials

Brickwork

Concrete

Reinforced concrete

Natural stone

* * * ** * * ** * ** * *


Good performance on medium hard construction material, reinforced concrete, brick, stone.


Good performance on medium hard construction material, reinforced concrete, brick, stone.


Smooth cutting on tile, masonry and stone.

0706

Cold pressed diamond disc for general purpose for South African MarketSintered diamond blade by cold pressed

Sintered blade by cold pressed for DIY marketEcnomic gradeApplication:

Item Picture Size

* * *Construction materials

Brickwork

Concrete

Reinforced concrete

Natural stone

* * ** * ** * ** * *

105x20x7115x22.23x7125x22.23x7150x22.23x7180x22.23x7230x22.23x7

105x20x10115x22.23x10125x22.23x10150x22.23x10180x22.23x10230x22.23x10

Segmented blade

105x20x7115x22.23x7125x22.23x7150x22.23x7180x22.23x7230x22.23x7

105x20x10115x22.23x10125x22.23x10150x22.23x10180x22.23x10230x22.23x10

Turbo blade

105x20x5115x22.23x5125x22.23x5150x22.23x5180x22.23x5230x22.23x5

105x20x7115x22.23x7125x22.23x7150x22.23x7180x22.23x7230x22.23x7



Cutting on construction material, reinforced concrete, brick, stone.


Cutting on construction material, reinforced concrete, brick, stone.


Smooth cutting on tile, masonry and stone.

Cold pressed diamond disc especially designed for South African market. Suitable for drilling on cured concrete, granite, marble and other construction materials. We can provide 2 quality level, class A and class B. Class A can provide good cutting speed and good lifespan. Class B can provide faster cutting speed and balance lifespan

Application & Feature

Item Size Class A Class B

Cold pressed diamond segmented disc for general purpose

Cold pressed turbo wave disc for general purpose

Cold pressed turbo disc for general purpose

Cold pressed continuous disc for general purpose

115×7mm

230×7mm

115×7mm

230×7mm

115×7mm

115×7mm

115×5mm

230×7mm

230×7mm

Cold pressed diamond blade for South Africa Market.

0908

Diamond wall chaser blade Diamond blade for groove cutting

S

S

ApplicationUsed for removal of mortar joints and preparation of masonry surface including pavers, concrete, block, bricks and stone

FeaturesWet or dry use. Long working life and superior performance. Wide U-Gullet with cooling holes for extremely fast cutting. For concrete, masonry and mortar removal. Perfect for routing decorative joints into stone work where cutting the stone proves too time consuming or difficult

EquipmentWet or dry use with angle grinders, circular saws and tuck pointers

Turbo segmented wall chaser blade

Diameter

105mm115mm125mm150mm180mm200mm230mm

6.35mm / 9.5mm6.35mm / 9.5mm6.35mm / 9.5mm6.35mm / 9.5mm6.35mm / 9.5mm6.35mm / 9.5mm6.35mm / 9.5mm

22.2mm / 16mm25.4mm / 22.2mm25.4mm / 22.2mm25.4mm / 22.2mm25.4mm / 22.2mm25.4mm / 22.2mm25.4mm / 22.2mm

Seg.H. Seg.W. Bore size Seg.T


Straight segStraight segStraight segStraight segStraight segStraight segStraight seg

ApplicationUsed for cleaning out and repairing/widening cracks or imperfections on a wide range of masonry surfaces

FeaturesWet or dry use. Long working life and superior performance. Premium V-segment crack chasers for concrete, brick, block and stone. Crack Chaser Blades feature wedge shaped segments for incredible cutting speed and exceptional blade life

EquipmentWet or dry use with angle grinders, circular saws and tuck pointers

Segmented wall chaser/crack chaser blade

Diameter


6.35mm / 9.5mm6.35mm / 9.5mm6.35mm / 9.5mm6.35mm / 9.5mm6.35mm / 9.5mm6.35mm / 9.5mm6.35mm / 9.5mm

22.2mm / 16mm25.4mm / 22.2mm25.4mm / 22.2mm25.4mm / 22.2mm25.4mm / 22.2mm25.4mm / 22.2mm25.4mm / 22.2mm

Seg.H. Seg.W. Bore size Seg.T


V-segmentV-segmentV-segmentV-segmentV-segmentV-segmentV-segment

* Straight segment, Long lasting, Fast cutting.* Can be Hot- pressed, Cold pressed, brazed or Laser Welded.* Used for the removal of mortar joints and preparation of masonry surfaces including pavers, concrete, block, bricks and stone.

Tuck Point Diamond Blade

Diameter (mm)

105115125150180200230

6.4 / 8.0 / 10.0 / 12.06.4 / 8.0 / 10.0 / 12.06.4 / 8.0 / 10.0 / 12.06.4 / 8.0 / 10.0 / 12.06.4 / 8.0 / 10.0 / 12.06.4 / 8.0 / 10.0 / 12.06.4 / 8.0 / 10.0 / 12.0

Segment Thickness (mm) Seg.Height (mm)

10101010101010

Diameter (mm)

105115125150180200230

6.4 / 8.0 / 10.0 / 12.06.4 / 8.0 / 10.0 / 12.06.4 / 8.0 / 10.0 / 12.06.4 / 8.0 / 10.0 / 12.06.4 / 8.0 / 10.0 / 12.06.4 / 8.0 / 10.0 / 12.06.4 / 8.0 / 10.0 / 12.0


10101010101010

Diameter (mm)

300350400450

6.4 / 8.0 / 10.0 / 12.06.4 / 8.0 / 10.0 / 12.06.4 / 8.0 / 10.0 / 12.06.4 / 8.0 / 10.0 / 12.0


6 / 8 / 106 / 8 / 106 / 8 / 106 / 8 / 10

* V shaped segment, Long lasting, Fast cutting.* Can be Hot- pressed, Cold pressed, brazed or Laser Welded.* Used for cleaning out and repairing/widening cracks or imperfections on a wide range of masonry surfaces.

Crack Chaser Diamond Blade

* Used for cutting expansion Joints in fresh concrete or green concrete* Traffic loop cutting blades for loop line traffic light detector systems.* Mainly in construction industry, for cured concrete, flint aggregate, green concrete, old concrete, hard concrete and asphalt.

Loop Saw Blade

1110

Diamond blade for brick/table saw Diamond blade for brick/table saw

Laser welded diamond blade for brick saw

Laser welded diamond blade for brick saw

High speed brick sawFast cut, segmented design for aggressive cutFor brick, hard clay, concrete and masonry block

Inch Metric9″10″12″14″

16182024

mm ZHole

LxTxHDiameter Seg.Dimension Teeth

22.2322.23/25.4

20/22.23/25.420/25.4

37×2.6×737×2.6×7

40×3.0×1040×3.0×10

230mm250mm300mm350mm

Brick saw for angle grinderFast cut, 230mm with silent coreFor brick, hard clay, concrete and masonry block

Metric180mm

230mm silent230mm silent

mm ZDiameter Seg.Size Teeth

Seg.T

33×2.6×1038.5×2.8×1038.5×2.8×12

Dry cutting on brickWet cutting on brickWet cutting on brick

141616

Laser welded diamond blade for table saw

General purpose for brick/table sawGood cutting, can do with silent coreFor brick, clay, concrete and masonry block

Laser welded diamond blade for table saw

Premier quality for hard & abrasive material Turbo segmented for high speed cutting. Can do with silent coreFor very hard brick, clay, refractory and abrasive material

Inch Metric12″14″16″18″20″24″

202428323642

mm ZHole


20/22.23/25.420/25.420/25.420/25.420/25.420/25.4

40×3.0×1040×3.2×1040×3.4×1040×3.6×1040×3.8×1040×4.2×10


Inch Metric9″10″12″14″

16182024

mm ZHole


22.2322.23/25.4

20/22.23/25.420/25.4

37×2.6×737×2.6×7

40×3.0×1040×3.0×10

230mm250mm300mm350mm

1312

Diamond blade for hand saw

High speed free hand saw blade

* Very high quality diamond and longer cutting life* Dry or wet cutting * Great for the general contractor that requires a faster cut to get the job done quickly * Segment height of 10mm or 12mm

Diameter Segmente Size Teeth300mm350mm400mm

40x3.0x10mm or 12mm40x3.2x10mm or 12mm40x3.4x10mm or 12mm

20 PCS24 PCS28 PCS

Diameter Segmente Size Teeth300mm350mm400mm

40x3.0x10mm or 12mm40x3.2x10mm or 12mm40x3.4x10mm or 12mm

20 PCS24 PCS28 PCS

Free hand diamond blade for gasoline saw

Walk behind saw

* Alternated turbo segments.* Long cutting life and high cutting speed * Perforated body and protective segments

Laser welded walk behind saw for asphalt

* Alternated turbo segments.* Long cutting life and high cutting speed * Perforated body and protective segments* High diamond concentration for very fast cut

Laser welded walk behind saw for old concreteSuper quality for 10-20kw machine

Super quality for 10-20kw machine

* High cutting speed * Good finishing* For better result on concrete

Standard quality for below 10kw machineLaser welded walk behind saw for old concrete

Diameter Segment Size Segment Nr.300mm350mm400mm450mm500mm550mm600mm

40×3.0×10mm40×3.2×10mm40×3.4×10mm40×3.6×10mm40×3.6×10mm40×3.8×10mm40×4.0×10mm

20242832363842


40×3.0×10mm40×3.2×10mm40×3.4×10mm40×3.6×10mm40×3.6×10mm40×3.8×10mm40×4.0×10mm

20242832363842


40×3.0×10/15mm40×3.2×10/15mm40×3.4×10/15mm40×3.6×10/15mm40×3.6×10/15mm40×3.8×10/15mm40×4.0×10/15mm

20242832363842

1514

Super quality for 10-20kw machine* Undercut protection can be added at special request* Delivers speed & convenience of diamond blade compared with abrasive blade that need frequentchanges. * A high quality blade that delivers long lasting, fast cutting .

Laser welded walk behind saw for green concrete

* Super rigid frame ensures staright cut and prolongs saw life* Fast aggressive cutting * Use indoors or outdoors – no gas or engine fumes

Standard quality for below 10kw machine

* Laser welded segments* Fast cutting and long life cutting in asphalt * Protective curved segments

Laser welded walk behind saw for asphaltStandard quality for below 10kw machine

Laser welded walk behind saw for green concrete


40×3.0×10/15mm40×3.2×10/15mm40×3.4×10/15mm40×3.6×10/15mm40×3.6×10/15mm40×3.8×10/15mm40×4.0×10/15mm

20242832363842


40×3.0×10/15mm40×3.2×10/15mm40×3.2×10/15mm40×3.4×10/15mm40×3.6×10/15mm40×3.8×10/15mm40×4.0×10/15mm

20242832363842


40×3.0×10/15mm40×3.2×10/15mm40×3.4×10/15mm40×3.6×10/15mm40×3.6×10/15mm40×3.8×10/15mm40×4.0×10/15mm

20242832363842

Walk behind saw Wall saw blade

Wall saw blade

Application & FeatureProfessional dry and wet cutting on reinforced concrete wall, brick wall, drywall and so on. Walls ranging from 4”to 32” thick. For replacement of doors, windows, ducts and for removing walls and floors for expansion or demolition.Blade range in size from 600mm to 1600mm diameter and can be run on electric, air or hydraulic saws from 10 to 60 horsepowerSpecify RPM, arbor size, pin hole size and bolt pattern can be available according to customer needSingle “U” type segment good for cooling. This “horseshoe” shape design provides faster cutting speeds and long life and also helps reduce segment loss.

Diameter Seg.Dimension

600mm

650mm

700mm

760mm

800mm

900mm

1000mm

1200mm

1400mm

1600mm

Hole Teeth

60mm

60mm

60mm

60mm

60mm

60mm

60mm

60mm

60mm

60mm

36

40

40

42

46

52

58

68

86

92

40×5×10mm

40×5×10mm

40×5×10mm

40×5×10mm

40×5×10mm

40×5×10mm

40×5×10mm

40×5×10mm

40×5×10mm

40×5×10mm

1716

Wall saw blade Diamond blade for stone

Diameter Application Steel core Seg.H. Seg.Nr.7mm7mm7mm7mm8mm8mm

212528323640

300×50mm350×50mm400×50mm450×50mm500×50mm600×50mm

MarbleMarbleMarbleMarbleMarbleMarble

Standard / SilentStandard / SilentStandard / SilentStandard / SilentStandard / SilentStandard / Silent

Applications: For cutting Marble

Equipment: For cutting MarbleFeatures: Brazed welded, wet cutting, Standard/Silent steel core

Applications: For cutting granite

Equipment: For cutting MarbleFeatures: Brazed welded, wet cutting, Standard/Silent steel core

Diameter Application Steel core Seg.H. Seg.Nr.15mm / 20mm15mm / 20mm15mm / 20mm15mm / 20mm15mm / 20mm15mm / 20mm

212528323640


GraniteGraniteGraniteGraniteGraniteGranite

Standard / SilentStandard / SilentStandard / SilentStandard / SilentStandard / SilentStandard / Silent

Diamond blade for granite

Diamond blade for marble

Application & FeatureProfessional dry and wet cutting on reinforced concrete wall, brick wall, drywall and so on. Walls ranging from 4”to 32” thick. For replacement of doors, windows, ducts and for removing walls and floors for expansion or demolition.Blade range in size from 600mm to 1600mm diameter and can be run on electric, air or hydraulic saws from 10 to 60 horsepowerSpecify RPM, arbor size, pin hole size and bolt pattern can be available according to customer needNormal type segment ensure long cutting life

Diameter Seg.Dimension

600mm

650mm

700mm

760mm

800mm

900mm

1000mm

1200mm

1400mm

1600mm

Hole Teeth

60mm

60mm

60mm

60mm

60mm

60mm

60mm

60mm

60mm

60mm

36

40

40

42

46

52

58

68

86

92

40×5×10mm

40×5×10mm

40×5×10mm

40×5×10mm

40×5×10mm

40×5×10mm

40×5×10mm

40×5×10mm

40×5×10mm

40×5×10mm

Wall saw blade

1918

Packages for diamond blade

Package optional Various kind of package can be available for BSP diamond blade

Color box package

Double blister package Shrink card package

Neutral package brown or white paper box

Drilling

20

2322

Wet diamond core bit Wet diamond core bit

Straight segmented

Rooftop segmented

Turbo segmented

Our high quality segment makes our core drill working very efficent. In the meantime the complete barrel gurantee a good concentricity.We have different type of core bit according to different application.

ApplicationHeavy reinforcement concreteStandard concrete and brick wallAsphalt

Segment length 24mm/0.935" Working length 400mm/16" Segment width 3-5.0mm/0.118-0.165" Overall length 450mm/18"

We can produce the diamond core drill with customer required size

Diamond core bit

Drill depth: 400mm/ Connection: 1/2BSP or 1 1/4 UNC

Complete wet diamond core bit M type segmented diamond core bit

V type segmented diamond core bitDrill depth: 400mm/ Connection: 1/2BSP or 1 1/4 UNC

Dia. Drill depth Seg.SizeSegs.No.of

mmmm mmDia. Drill depth Seg.Size

Segs.No.of

mmmm mm25273236384246525663677276838992102108

400400400400400400400400400400400400400400400400400400

400400400400400400400400400400400400400400400400400

1010111111121212141414151516161718

3345445556677788910

114122127132142152160165172180200215230250254305355

15×4.0×1015×4.0×1015×4.0×1015×4.0×1020×3.5×1020×3.5×1020×3.5×1024×3.5×1024×3.5×1024×3.5×1024×3.5×1024×3.5×1024×3.5×1024×3.5×1024×3.5×1024×3.5×1024×4.0×1024×4.0×10

24×4.0×1024×4.0×1024×4.0×1024×4.0×1024×4.0×1024×4.0×1024×4.0×1024×4.0×1024×4.0×1024×4.0×1024×4.5×1024×4.5×1024×4.5×1024×4.5×1024×4.5×1024×5.0×1024×5.0×10

Dia. Seg.SizeSegs.No.of

mmmmDia. Seg.Size

Segs.No.of

mmmm25273236384246525663677276838992

102108

1010111111121212141414151516161718

33454455566777889

10

114122127132142152160165172180200215230250254305355

15×4.0×1015×4.0×1015×4.0×1015×4.0×1020×3.5×1020×3.5×1020×3.5×1024×3.5×1024×3.5×1024×3.5×1024×3.5×1024×3.5×1024×3.5×1024×3.5×1024×3.5×1024×3.5×1024×4.0×1024×4.0×10

24×4.0×1024×4.0×1024×4.0×1024×4.0×1024×4.0×1024×4.0×1024×4.0×1024×4.0×1024×4.0×1024×4.0×1024×4.5×1024×4.5×1024×4.5×1024×4.5×1024×4.5×1024×5.0×1024×5.0×10

Dia. Seg.SizeSegs.No.of

inchinchDia. Seg.Size

Segs.No.of

inchinch1

1 1/161 1/4

1 7/161 1/21 5/8

1 13/162

2 3/162 1/22 5/8

2 13/163

3 1/43 1/23 5/8

44 1/4

1010111111121212141414151516161718

33454455566777889

10

4 1/24 13/16

55 3/165 5/8

66 5/166 1/26 3/47 1/8

88 7/16

99 13/16

101214

0.6×0.16×0.40.6×0.16×0.40.6×0.16×0.40.6×0.16×0.40.8×0.14×0.40.8×0.14×0.40.8×0.14×0.41×0.14×0.41×0.14×0.41×0.14×0.41×0.14×0.41×0.14×0.41×0.14×0.41×0.14×0.41×0.14×0.41×0.14×0.41×0.16×0.41×0.16×0.4

1×0.16×0.41×0.16×0.41×0.16×0.41×0.16×0.41×0.16×0.41×0.16×0.41×0.16×0.41×0.16×0.41×0.16×0.41×0.16×0.41×0.18×0.41×0.18×0.41×0.18×0.41×0.18×0.41×0.18×0.41×0.2×0.41×0.2×0.4

2524

Wet diamond core bit


Assembly diamond core bit is made up of drilling head, tube and coupling. It is easy for assembling and replacement.

ApplicationHeavy reinforcement concreteStandard concreteBrickAsphalt

Segment length 24mm/0.935" Working length 300mm/12"Segment width 3-5.0mm/0.118-0.165" Overall length 350mm/14"

Diamond core bit


Premium quality core bits provide smooth and clear drilling. The crown system can greatly avoid segment loosing during drilling. Need wet drilling. Connection:1/2"BSP or 1-1/4"UNC.

ApplicationHeavy reinforcement concreteStandard concrete or brick wallAsphalt

Adaptor 1/2"BSP Working length 300mm or 350mmOverall length 350mm or 400mm

Diamond core bit

Super thinStandard

Extre thick segment Coupling Tube Drilling head

Assembly diamond core bit Crown diamond core bit

Wet diamond core bit

D(mm) No.of segment Segment Height Connection1″

1-1/8″1-1/4″1-1/2″2″

2-1/4″2-1/2″2-3/4″3″

3-1/4″4″

4-1/4″4-1/2″5″6″7″8″10″12″

25293238525763707683102108114127152178203254300

4444556888101010121213131520

1/2BSP1/2BSP1/2BSP

1 1/4UNC1 1/4UNC1 1/4UNC1 1/4UNC1 1/4UNC1 1/4UNC1 1/4UNC1 1/4UNC1 1/4UNC1 1/4UNC1 1/4UNC1 1/4UNC1 1/4UNC1 1/4UNC1 1/4UNC1 1/4UNC

7.0mm7.0mm7.0mm

7/8/9/10mm7/8/9/10mm7/8/9/10mm7/8/9/10mm7/8/9/10mm7/8/9/10mm7/8/9/10mm7/8/9/10mm7/8/9/10mm7/8/9/10mm7/8/9/10mm7/8/9/10mm7/8/9/10mm7/8/9/10mm7/8/9/10mm7/8/9/10mm

D(mm) Seg H. Working L. Connection 1/3 2/5 1/2　

5/9 3/5 5/8 5/7 4/5 6/7111

1 1/91 1/61 1/41 3/81 1/21 4/71 2/31 7/9

2

8mm10mm12mm13mm14mm15mm16mm18mm20mm22mm24mm25mm26mm28mm30mm32mm35mm38mm40mm42mm45mm50mm


1/2"BSP1/2"BSP1/2"BSP1/2"BSP1/2"BSP1/2"BSP1/2"BSP1/2"BSP1/2"BSP1/2"BSP1/2"BSP1/2"BSP1/2"BSP1/2"BSP1/2"BSP1/2"BSP1/2"BSP1/2"BSP1/2"BSP1/2"BSP1/2"BSP1/2"BSP


Seg.W.2mm2mm2mm2mm2mm

2.5mm2.5mm2.5mm2.5mm2.5mm2.5mm2.5mm2.5mm2.5mm2.5mm2.5mm3mm3mm3mm3mm3mm3mm

2726

Diamond segment for retipping Diamond segment for retipping

M type segment

Dia (mm) Segment Size (mm)25-3638-4652-92

102-180200-254305-355

15 x 3.0 x 1020 x 3.5 x 1024 x 3.5 x 1024 x 4.0 x 1024 x 4.5 x 1024 x 5.0 x 10

Rooftop type segment

The special rooftop design makes starting the drilling process significantly easier.


102-180200-254305-355

15 x 3.0 x 1020 x 3.5 x 1024 x 3.5 x 1024 x 4.0 x 1024 x 4.5 x 1024 x 5.0 x 10

These segments are mainly apply to cut for reinforced concrete or concrete wall with water. With high quality diamond and longer corning life.

V type segment


102-180200-254305-355

15 x 3.0 x 1020 x 3.5 x 1024 x 3.5 x 1024 x 4.0 x 1024 x 4.5 x 1024 x 5.0 x 10

RT-Turbo type segment

Extreme premium quality segment Fast drilling in reinforced concrete Self-sharpening


102-180200-254305-355

15 x 3.0 x 1020 x 3.5 x 1024 x 3.5 x 1024 x 4.0 x 1024 x 4.5 x 1024 x 5.0 x 10

These segments are mainly apply to cut for concrete,reinforced concrete. With high quality dimaond and longer corning life.

2928

Standard saw blade segment

Big block saw segment

Extreme premium quality segment Fast drilling in reinforced concrete Self-sharpening

These segments are mainly apply to cut and process small slabs for granite, marble and sand stone

Straight type segment

Dia (mm) Segment Height (mm)25-3638-4652-92

102-180200-254305-355

Segment Width (mm)25-3638-4652-92

102-180200-254305-355

15 x 3.0 x 1020 x 3.5 x 1024 x 3.5 x 1024 x 4.0 x 1024 x 4.5 x 1024 x 5.0 x 10

Dia (mm) Segment dimension (L×W×H)300350400450500550

No.of segment212428323638

40x2.8/3.0/3.2x8/10/1240x3.2/3.4x10/12/1540x3.2/3.4/3.6x10/12/15/2040x3.4/3.6/3.8/4.0x10/12/15/2040x4.2x10/12/15/2040x4.2/4.4x10/12/15/20

Dia (mm) Segment dimension (L×W×H)900

10001200130014001600

No.of segment6470808896

108

24×5.6/6.2×12(15)24×6.2/6.8×12(15)24×7.0/7.6×12(15)24×7.4/8.0×12(15)24×7.6/8.2×12(15)24×8.4/9.0×12(15)

Crown segment

The crowns are characterised by highly reliable drilling behaviour, even on reinforced materials


102-180200-254305-355

15 x 3.0 x 1020 x 3.5 x 1024 x 3.5 x 1024 x 4.0 x 1024 x 4.5 x 1024 x 5.0 x 10

These segments are mainly apply to cut for concrete,reinforced concrete. With high quality dimaond and longer corning life.

Diamond segment for retipping Diamond segment for retipping

3130

Extension adaptor

Adaptors & accessories for wet diamond core bit

1 1/4UNC male to 1 1/4UNC femaleRound Shank

Total Length: 100mm, 120mm, 150mm, 200mm, 250mm, 300mm, 350mm, 400mm, 450mm, 500mm, 550mm


1 1/4UNC male to 1 1/4UNC femaleHexagonal Shank

1/2BSP (M16/5/8-11") male to 1/2BSP (M16/5/8-11") female


1 1/4UNC female to 1 1/4UNC female

Total Length: 100mm, 115mm, 120mm, 200mm, 240mm, 300mm, 400mm, 500mm



1 1/4UNC female to 5/8-11"（M16/ 1/2BSP） male

1 1/4UNC male to 5/8-11"（M16/ 1/2BSP） Female

1/2BSP male to 5/8-11" （1/2bsp M16）male

1/2BSP male to 1/2BSP （5/8-11/ M16）male




1/2BSP （5/8-11/ M16）female to 1/2BSP（5/8-11/ M16） female

1 1/4UNC male to M22

1 1/4UNC male to 1/2BSP male

Exchange adaptor



Packages of wet diamond core bit

Description SizePicture Description SizePicture

Description SizePicture Description SizePicture

The retipping magnet are made of strong N35EH neodymium magnet with strong magnitizm but also high resistance for heat. In the meantime, the retipping magnet are perfect for position the drilling segment in percise side clearance. Also the inner side clearance can be adjust when you put the magnet in its' a, b, c, d position.

Application

Feature

For segment retipping

SizeNormally when brazing the segment, the rule is:Inner Side clearance = (Segment width - steel core width) x 0.4Outer Side clearance = (Segment width - steel core width) x 0.4Following is the reference for the segment size and steel core width for different diameter

4 side clearance availableStrong magnet for resisting high temperature

b position side clearance: 0.75mma position side clearance: 0.50mm

Inner side clearance = (Segment width-steel core width)×0.4Outer side clearance = (Segment width-steel core width)×0.4

d position side clearance: 1.25mmc position side clearance: 1.0mm

c

a

b

Segmentthickness

Outer sideclearance

Inner sideclearance

Thicknessof steel core

d

So normally when we brazing the segment, the rule is:

Following is the reference for the segment size and steel core width for different diameter

1"

1-1/4"

1-1/2"

1-3/4"

2"

2-1/4"

2-1/2"

3"

3-1/2"

4"

4-1/4"

4-1/2"

5"

5-1/2"

6"

6-1/2"

7"

8"

9"

10"

12"

25

32

38

44

52

58

63

76

89

102

108

114

127

140

152

167

180

200

230

250

305

3

4

5

5

5

5

6

7

8

9

10

10

11

11

12

12

14

14

15

16

20

3.5mm

3.5mm

3.5mm

3.5mm

3.5mm

3.5mm

3.5mm

3.5mm

3.5mm

4.0mm

4.0mm

4.0mm

4.0mm

4.0mm

4.0mm

4.0mm

4.5mm

4.5mm

4.5mm

5.0mm

5.0mm

2.0mm

2.0mm

2.0mm

2.0mm

2.0mm

2.0mm

2.0mm

2.0mm

2.0mm

2.5mm

2.5mm

2.5mm

2.5mm

2.5mm

2.5mm

2.5mm

3.0mm

3.0mm

3.0mm

3.5mm

3.5mm

15×3.5×9

15×3.5×9

20×3.5×9

20×3.5×9

24×3.5×10

24×3.5×10

24×3.5×10

24×3.5×10

24×3.5×10

24×4.0×10

24×4.0×10

24×4.0×10

24×4.0×10

24×4.0×10

24×4.0×10

24×4.0×10

24×4.5×10

24×4.5×10

24×4.5×10

24×4.5×10

24×4.5×10

Diameter(inch) (mm) (mm)Seg.Nr

Segment size Segmentthickness

Steel corethickness


Magnet holder for segment retipping

With N35EH neodymium magnet72.5mm overal length

3332

Application

Hilti exchange adaptor


For exchanging core bit on Hilti machine.

HILTI core drill machine adapter DD110-W DD120 DD130 DD150-U DD-BI+ to 1-1/4 UNC male and 1/2 BSP female(M16/5/8-11")

HILTI core drill machine adapter DD110-W DD120 DD130 DD150-U DD-BI+ to SHIBUYA A1 male and 1/2BSP female(M16/5/8-11")

HILTI core drill machine adapter DD110-W DD120 DD130 DD150-U DD-BI+ to 1/2 male and 1/2 female(M16/5/8-11")

HILTI core drill machine adapter DD200 to 1-1/4 UNC male and 1/2 BSP female(M16/5/8-11")

HILTI core drill machine adapter DD200 to SHIBUYA A1 male and 1/2 BSP female(M16/5/8-11")

CORE DRILL ADAPTER FOR HILTI DD160E/250E/200/350 - DD-BL to 1-1/4 UNC male and 1/2 BSP female(M16/5/8-11")

HILTI core drill machine adapter DD-C T2 toand 1/2 BSP female(M16/5/8-11")

Hilti 01

Hilti 02

Hilti 03

Hilti 04

Hilti 05

Hilti 06

Hilti 07

Refer.Picture Refer.Picture SpecificationPOS

Dry diamond core bit

Professional laser welded dry core bit

*Very high quality diamond and longer corning life*Special N-Slot segment for supreme dust exclusion*Fast drilling speed for high work efficienc*The core bit thread is 5/8-11" or M14

Application

Feature

concrete,normal concrete,brick wall, special concrete with light steel bar.

Inch Dia. W/L. T/L. Seg.Size Seg.qty1″

1-1/2″2″

2-1/2″3″4″

4-1/2″5″

25mm38mm52mm65mm76mm

102mm114mm127mm

300mm150mm150mm150mm150mm150mm150mm150mm


15×3.0×10mm20×3.0×10mm24×3.5×10mm24×3.5×10mm24×3.5×10mm24×4.0×10mm24×4.0×10mm24×4.0×10mm

3PCS3PCS3PCS4PCS4PCS5PCS6PCS7PCS

New design

3534

Standard laser welded dry core bit set

concrete, normal concrete, brick wall, special concrete with light steel bar


Professional laser welded dry core bit set

* Very high quality diamond and longer corning life* Special N-Slot segment for supreme dust exclusion* Fast drilling speed for high work efficienc* The core bit thread is 5/8-11" or M14

Application Feature

3pcs laser welded dry core bit set Content: 1. 65mm x 150mm 2. 52mm x 150mm 3. 38mm x 150mm 4. 10mm x 200mm masonry drill and drift 5. Adaptor 115mm SDS Plus-1/2" BSP male 6. Adaptor 88mm Hex-1/2" BSP male 7. 200mm drill bit extension MOQ: 50 sets

5pcs laser welded dry core bit set 1. 117mm diameterx150mm 2. 107mm diameterx150mm 3. 65mm diameterx150mm 4. 52mm diameterx150mm 5. 38mm diameterx150mm 6. 10mmx200mm masonry drill and drift 7. Adaptor 115mm SDS plus-1/2" BSP male 8. Adaptor 88mm hex-1/2" BSP male 9. 200mm drill bit extension MOQ: 50 sets


* Good quality diamond and good coring value* Core can be removed in one piece avoiding the need for marking good by a brick layer or plasterer.* Cut clean accurate holes through bricks &blocks,producing exact size holes with almost no break out* The core bit thread is 5/8-11" or M14

Application

Feature

Soft bricks; Lightweight blocks

Standard laser welded dry core bit set

*The dry core bit is a perfect tool for electrical and sanitary installation work *Significantly shorter drilling time*Less working pressure*Reduced dust development

Application

Feature

Concrete, brick and block

68 or 82mm Laser welded dry core bit

Dia.Inch Seg.Size Seg.qtyW/L. T/L.1″

1-1/4″1-1/2″2″

2-1/4″2-1/2″3″

3-1/2″




3pcs3pcs4pcs3pcs3pcs4pcs4pcs4pcs

17×3.0×10mm17×3.0×10mm17×3.0×10mm24×3.5×10mm24×3.5×10mm24×3.5×10mm24×3.5×10mm24×3.5×10mm

Dia. Seg.Size Seg.qtyW/L. T/L. Connection70mm70mm

80mm80mm

68mm82mm

4pcs5pcs

M16M16

24×4.0×10mm24×4.0×10mm

3pcs laser welded dry core bit set

1. 65mm diameterx150mm2. 52mm diameterx150mm3. 38mm diameterx150mm4. 10mmx200mm masonry drill and drift5. Adaptor 115mm SDS plus-1/2" BSP male6. Adaptor 88mm hex-1/2" BSP male7. 200mm drill bit extensionMOQ: 50 sets

5pcs laser welded dry core bit set

1. 117mm diameterx150mm2. 107mm diameterx150mm3. 65mm diameterx150mm4. 52mm diameterx150mm5. 38mm diameterx150mm6. 10mmx200mm masonry drill and drift7. Adaptor 115mm SDS plus-1/2" BSP male8. Adaptor 88mm hex-1/2" BSP male9. 200mm drill bit extensionMOQ: 50 sets


Super premium laser welded dry core bit

* Dryer vents* Blue-iron gas pipes* High efficiency furnace exhaust pipes* Turbo barrel design for smoother drilling.* The standard 9” short dry bits with 5/8-11” thread were designed to be used dry on hand-held drills

Application

Feature

For fast dry drilling in concrete with rebar.

* Drilling sharp* Long life* Arbor length for 140mm and 180mm

Application Feature

Marble, Granite,Concrete

Tubular dry core bit

Dia Segment height Seg.qty Cup length19mm25mm30mm35mm40mm45mm50mm60mm65mm

9mm9mm9mm9mm9mm9mm9mm9mm9mm

51mm51mm51mm51mm51mm51mm51mm51mm51mm

3pcs3pcs3pcs4pcs4pcs4pcs4pcs5pcs6pcs

Dia.Inch Seg.Size Seg.qtyW/L. T/L.1″

1-1/8″1-1/4″1-3/8″1-1/2″1-3/4″2″

2-1/4″2-1/2″3″

3-1/2″4″5″6″

25mm28mm32mm35mm38mm44mm51mm57mm65mm76mm89mm

102mm127mm152mm

265mm265mm265mm265mm265mm265mm265mm265mm265mm265mm265mm265mm265mm265mm

250mm250mm250mm250mm250mm250mm250mm250mm250mm250mm250mm250mm250mm250mm

3pcs3pcs3pcs3pcs3pcs3pcs3pcs3pcs4pcs4pcs5pcs5pcs6pcs7pcs

15×3.7×10mm15×3.7×10mm15×3.7×10mm15×3.7×10mm20×3.7×10mm20×3.7×10mm24×3.7×10mm24×3.7×10mm24×3.7×10mm24×3.7×10mm24×3.7×10mm24×3.7×10mm24×3.7×10mm24×4.0×10mm

Two slant line hole with screw pipe dry bit

Two straight line hole dry bit

Three slant line hole dry bit

Two slant line hole dry bit

Adaptors & accessories for dry diamond core bit

TotalLength:100mm,115mm,120mm,200mm, 240mm, 300mm, 400mm, 500mm

Total Length: 88mm, 100mm, 115mm, 120mm, 200mm, 240mm, 300mm, 400mm 500mm

Total Length: 200mm, 240mm, 300mm, 400mm, 50mm



Total Length: 100mm, 120mm, 200mm, 240mm, 300mm, 400mm, 500mm

Total Length: 100mm, 120mm, 200mm, 240mm, 300mm, 400mm, 500mm

100mm

100mm

100mm

120mm

70mm

70mm

220mm

10x200mm,10x300mm,10x450mm,13x230mm

core drill 6.5x120mmSDS plus +M16Extractor

SDS plus to1/2BSP（M16/5/8-11"）

HEX to1/2BSP（M16/M22/5/8-11"）

SDS Max to 1 1/4UNC

SDS Max to1/2BSP（M16/5/8-11"）

SDS plus toM22

SDS plus to M16/1/2BSP/5/8-11"

HEX to M16/1/2BSP/5/8-11"

SDS Plus to 1/2" BSP Female

SDS Max to 1/2" BSP Female

Hex Adaptor to 1/2" BSP Female

SDS Max to 1/2" BSP(M16,M22,5/8-11")Male

3 SIDED 3/8" SHANK TO 5/8-11 MALE

Drift Key

A Taper Guide Rod 220mm

A Taper Dril

3pcs drill bit adaptor for dry core bits

Picture Description Size

Adaptors & accessories for dry diamond core bit

3736

Super thin diamond core bit for cermic and tile

*Our ultra thinwall core bits are designed for polishing machine with center water feeder*This core bit providelonger drillinglife, smoothersurface finish,faster and free drilling action, moreconsistent performance

Application Feature

Ceramic, tile

Dia Seg.Size Seg.qty W.L./T.L.Steelbondthick Connection

Φ6Φ8Φ10Φ12Φ14Φ16Φ18Φ20Φ25Φ30Φ35

0.6mm0.6mm0.6mm0.6mm0.6mm0.6mm0.6mm0.6mm0.6mm0.6mm0.6mm

1/2 BSP& M141/2 BSP& M141/2 BSP& M141/2 BSP& M141/2 BSP& M141/2 BSP& M141/2 BSP& M141/2 BSP& M141/2 BSP& M141/2 BSP& M141/2 BSP& M14

45/75mm45/75mm45/75mm45/75mm45/75mm45/75mm45/75mm45/75mm45/75mm55/88mm55/88mm

Φ6×1.2×8Φ8×1.2×8Φ10×1.2×8Φ12×1.2×8Φ14×1.2×8Φ16×1.2×8Φ18×1.2×8Φ20×1.2×8Φ25×1.2×8Φ30×1.2×8Φ35×1.2×8

Crown segmentCrown segmentCrown segmentCrown segmentCrown segmentCrown segmentCrown segmentCrown segmentCrown segmentCrown segmentCrown segment

Stone/Tile/Glass diamond core bit

* Fit on a high-speed angle grinder* Engineered stone countertop at the job site without using water. * It provides the best cutting performance

Application FeatureGranite, tile

Dry diamond core bit for granite

Dia Seg.Size Seg.qtyW.L./T.L. ConnectionΦ10Φ12Φ14Φ16Φ18Φ20Φ25Φ30Φ40Φ45

Φ10×2.0×8Φ12×2.5×10Φ14×2.5×10Φ16×2.5×10Φ18×2.5×10Φ20×2.5×10Φ25×2.5×10Φ30×3.0×1020×3.0×1024×3.0×10

80/130mm80/130mm80/130mm80/130mm80/130mm80/130mm80/130mm80/130mm80/130mm80/130mm

1/2 BSP & M 14/M 16/5/8-11″1/2 BSP & M 14/M 16/5/8-11″1/2 BSP & M 14/M 16/5/8-11″1/2 BSP & M 14/M 16/5/8-11″1/2 BSP & M 14/M 16/5/8-11″1/2 BSP & M 14/M 16/5/8-11″1/2 BSP & M 14/M 16/5/8-11″1/2 BSP & M 14/M 16/5/8-11″1/2 BSP & M 14/M 16/5/8-11″1/2 BSP & M 14/M 16/5/8-11″

Crown segmentCrown segmentCrown segmentCrown segmentCrown segmentCrown segmentCrown segmentCrown segment

4Pcs4Pcs


*Diamond core drill bit is used for any natural stones processing.*The diamond core drill bit working with minimal dust

Application Feature

Granite, marble and other hard stones

Wet diamond core bit for granite

*The side protection offers clean cut & steel core protection*With technology of precise diamond placement throughout the segment, fabricators receive the fast drilling speeds possible without compromising tool life*Perfect safety, excellent fast, high efficiency and complicated shape

Application Feature

Granite, tile

Wet Granite core bit with side protection

Dia Seg.Size Seg.qtyW.L./T.L. ConnectionΦ40Φ45Φ50Φ55Φ60Φ65Φ70Φ76Φ80

20×3.0×1024×3.0×1020×3.0×1024×3.0×1020×3.0×1024×3.0×1020×3.0×1024×3.0×1020×3.0×10

80/102mm80/102mm80/102mm80/102mm80/102mm80/102mm80/102mm80/102mm80/102mm

1/2 BSP & M 14/5/8-11″1/2 BSP & M 14/5/8-11″1/2 BSP & M 14/5/8-11″1/2 BSP & M 14/5/8-11″1/2 BSP & M 14/5/8-11″1/2 BSP & M 14/5/8-11″1/2 BSP & M 14/5/8-11″1/2 BSP & M 14/5/8-11″1/2 BSP & M 14/5/8-11″

4Pcs4Pcs5Pcs5Pcs6Pcs6Pcs7Pcs7Pcs8Pcs

Dia Seg.Size Seg.qtyW.L./T.L. ConnectionΦ10Φ12Φ14Φ16Φ18Φ20Φ25Φ35Φ40Φ45

Φ10×2.0×10Φ12×2.5×10Φ14×2.5×10Φ16×2.5×10Φ18×2.5×10Φ20×2.5×10Φ25×2.5×10Φ35×3.0×1020×3.0×1024×3.0×10

60/102mm60/102mm60/102mm60/102mm60/102mm60/102mm60/102mm70/102mm70/102mm70/102mm

1/2 BSP & M 14/5/8-11″1/2 BSP & M 14/5/8-11″1/2 BSP & M 14/5/8-11″1/2 BSP & M 14/5/8-11″1/2 BSP & M 14/5/8-11″1/2 BSP & M 14/5/8-11″1/2 BSP & M 14/5/8-11″1/2 BSP & M 14/5/8-11″1/2 BSP & M 14/5/8-11″1/2 BSP & M 14/5/8-11″

Crown segmentCrown segmentCrown segmentCrown segmentCrown segmentCrown segmentCrown segmentCrown segment

4Pcs4Pcs

3938

Vacuum Brazed Diamond products

ApplicationGranite & Marble

CNC diamond core drill bit

*High efficiency no-chipping long life.*Fast drilling with Gas 1/2” thread. *Thin wall design provides for fast cutting and reduced blowouts.

Feature

Dia Seg.qty Seg.size W.L./T.L. ConnectionΦ12Φ14Φ16Φ18Φ20Φ25Φ32Φ35Φ38Φ40Φ45Φ50

Φ12×2.5×10Φ14×2.5×10Φ16×2.5×10Φ18×2.5×10Φ20×2.5×10Φ25×2.5×10Φ32×2.5×10Φ35×2.5×10Φ38×2.5×1020×3.0×1024×3.0×1020×3.0×10

60/102mm60/102mm60/102mm60/102mm60/102mm60/102mm70/102mm70/102mm70/102mm70/102mm70/102mm70/102mm

1/2 BSP Male1/2 BSP Male1/2 BSP Male1/2 BSP Male1/2 BSP Male1/2 BSP Male1/2 BSP Male1/2 BSP Male1/2 BSP Male1/2 BSP Male1/2 BSP Male1/2 BSP Male

Crown segmentCrown segmentCrown segmentCrown segmentCrown segmentCrown segmentCrown segmentCrown segmentCrown segment

4Pcs4Pcs4Pcs


Electric plated core bit

Clean and precise holes at last, drilled easily in a few seconds, even in bathrooms and stone kitchen surfaces.

Application

Feature

Tile & glass

Dia W.L. T.L. Connection10mm12mm14mm16mm19mm22mm29mm35mm41mm44mm51mm



Round shankRound shankRound shankRound shank

Hex shankHex shankHex shankHex shankHex shankHex shankHex shank

40

4342

Vacuum Brazed Drill bit

Application

For extremely hard ceramic.

Feature

Quick start and fast drillingLong using lifeWax cooling technologySmooth and continuous usage

Application

For extremely hard ceramic and stones

Feature

Quick start and fast drillingLong using lifeCooling free without cooling waterSmooth and continuous usage


Dia.(mm) Bit Height

65

6

8

10

12

14

16

Segment Height Connection

10/15

10/15

10/15

10/15

10/15

10/15

10/15

M14,5/8-11

M14,5/8-11

M14,5/8-11

M14,5/8-11

M14,5/8-11

M14,5/8-11

M14,5/8-11

63/67

63/67

63/67

63/67

63/67

63/67

63/67

Dia.(mm) Bit Height

18

20

25

30

35

40

45

50

55

60

65

70

75

80

85

90

100

110

120


10/15

10/15

10/15

10/15

10/15

10/15

10/15

10/15

10/15

10/15

10/15

10/15

10/15

10/15

10/15

10/15

10/15

10/15

10/15

M14,5/8-11

M14,5/8-11

M14,5/8-11

M14,5/8-11

M14,5/8-11

M14,5/8-11

M14,5/8-11

M14,5/8-11

M14,5/8-11

M14,5/8-11

M14,5/8-11

M14,5/8-11

M14,5/8-11

M14,5/8-11

M14,5/8-11

M14,5/8-11

M14,5/8-11

M14,5/8-11

M14,5/8-11

64/76

63/76

63/76

63/76

63/76

63/76

63/76

63/76

63/76

63/76

63/76

63/76

63/76

63/76

76

76

76

90

90

Vacuum Brazed High-speed drill bit with wax cooling Vacuum Brazed High-speed drill bit without wax cooling

4544

Vacuum Brazed General speed drill bit with wax coolingVacuum Brazed High-speed drill bit

Vacuum Brazed High-speed drill bit

Vacuum Brazed Drill bitVacuum Brazed Drill bit

Application

For extremely hard ceramic ,stones and earthenware.

Feature

Quick start and fast drillingLong using lifeSmooth and continuous usage

Application

For ceramic and tiles.

Feature

Standard quick change HEX fit designQuick start and fast drillingLong using lifeSmooth and continuous usage

Application

For all tile, fiberglass, brick and granite.

Feature

Quick start and fast drillingPrecision-Fit TipLong using lifeSmooth and continuous usage

Dia.(mm) Total length

5

12

25

32

89

127


2

2

2

2

2

2

1/4"Hex

1/4"Hex

1/4"Hex

5/8-18"UNF

5/8-18"UNF

5/8-18"UNF

55

55

55

46

46

46

Dia.(mm) Total length

6

8

19

22

25

105


10/15

10/15

10/15

10/15

10/15

10/15

Hex shank

Hex shank

Hex shank

5/8-18"UNF

5/8-18"UNF

5/8-18"UNF

75

80

80

50

50

46

Dia.(mm) Bit Height

5

6

8

10

12

14

16


10/15

10/15

10/15

10/15

10/15

10/15

10/15

Hexagon

Hexagon

Hexagon

Hexagon

Hexagon

Hexagon

Hexagon

63/67

63/67

63/67

63/67

63/67

63/67

63/67


Features

For high speed drillingSpecification can be customized

Contents

1.20mm2.35 mm3.38 mm4.43 mm5.50 mm6.60 mmConnection: M14,5/8-11

Features

For general speed drillingSpecification can be customized

Contents

1.6mm 2.8 mm3.10 mm4.12mmConnection: Hexagon

For angle grinder

For angle grinder

46

Vacuum Brazed Diamond ProductsVacuum Brazed Drill bit Set

4948

Vacuum Brazed Diamond Saw BladeVacuum Brazed Diamond Saw Blade

Application

General purpose material

Feature

Wide applicabilityExcellent sharpness ,less sparksCooling freeSpecial heat dissipation design


Outer diameter(mm) Steel core thickness(mm)

105mm

115mm

125mm

180mm

230mm

300mm

350mm

400mm

Hole size(mm) Segment thickness(mm)

22.23

22.23

22.23

22.23

22.23

22.23

22.23

22.23

2.2

2.2

2.2

2.4

2.5

2.6

2.8

3.2

1.2

1.2

1.2

1.4

1.5

2.0

2.2

2.5

Application

For metal cutting

Feature

Ultrathin design, extremely sharp for steelContinuous rim design, ensure smooth cuttingEnvironment friendly


105mm

115mm

125mm

180mm

230mm

300mm

350mm

400mm


22.23

22.23

22.23

22.23

22.23

22.23

22.23

22.23

2.2

2.2

2.2

2.4

2.5

2.6

2.8

3.2

1.2

1.2

1.2

1.4

1.5

2.0

2.2

2.5

Vacuum Brazed Diamond Saw Blade for General Purpose

Vacuum Brazed Diamond Saw Blade for Metal

Application

For stone cutting

Feature

Wide applicabilityFor both dry cut and wet cutSuper sharp, efficient



100mm

110mm

Hole size(mm)

5/10/15

5/10/15

20

20

Application

For wood with nails

Feature

Can cut off more than 100pcs of steel nails in the wood blockUltrathin design, extremely sharp TCT particles tippedCooling freeSmooth and continuous usage


105mm

115mm

125mm


22.23

22.23

22.23

2.2

2.2

2.2

1.2

1.2

1.2

Vacuum Brazed Diamond Saw Blade for General Purpose

Vacuum Brazed Diamond Saw Blade for Wood with Nails

Vacuum Brazed Diamond Cup Wheel

Application

For general purpose

Feature

Environment friendlyLong working life compare to resin grinding wheelSmooth and continuous usageCooling free


Outer diameter(mm)

100

125

150

180

Hole size(mm)

C

Vacuum Brazed Diamond Cup Wheel for general purposel

Application

For general purpose

Feature

Environment friendlyHigh efficiencyCooling free


Outer diameter(mm)

100

125

150

180

Hole size(mm)

20

20

20

20

Vacuum Brazed Diamond Wheel for Cutting and Grinding

Application

For cast iron, welded joint,steel surface processing, concrete

Feature

Environment friendlyHigh efficiencyLong working life compare to resin grinding wheelSmooth and continuous usage


Outer diameter(mm)

100

125

150

180

Hole size(mm)

20

20

20

20

Vacuum Brazed Diamond Wheel for Metal Grinding

Vacuum Brazed Diamond Products

51

53

APPLICATIONS: Used for grinding concrete and natural StoneFEATURES: Dry/Wet Use for general purposeEQUIPMENT: Most in hand held grinding machine

Single row sintered diamond cup wheel

Segment numberDiameter Grit22.23mm/M1422.23mm/M1422.23mm/M1422.23mm/M1422.23mm/M1422.23mm/M14

105mm110mm115mm125mm 150mm180mm

5mm/7mm5mm/7mm5mm/7mm5mm/7mm5mm/7mm5mm/7mm

* Concrete grinding* Stone grinding* Coating removal

ApplicationSingle row sintered diamond cup wheels offer an economical grinding solution. Aggressive grinding speeds in concrete, stone and masonry. Also idea for lower powered machine due to light weight.

Features

Hand held grinding cup wheel for general purpose

Grinding


Double row sintered diamond cup wheel

Turbo sintered diamond cup wheel

Turbo brazed diamond cup wheel

Segment numberDiameter Grit22.23mm / M1422.23mm / M1422.23mm / M1422.23mm / M1422.23mm / M1422.23mm / M14


Fine:#100/#120 Medium: #60/#80Coarse:#30/#40


Application



5mm / 7mm5mm / 7mm5mm / 7mm5mm / 7mm5mm / 7mm5mm / 7mm


Application


105mm110mm115mm125mm 150mm180mm



Application

Ideal for smoothing and shaping, excellent choice for finishing granite,marble and concrete materials.

Features

Turbo style cup wheel available in coarse and fine grits for grinding concrete and coating removal.

Features

Dould row cup wheel are an excellent and economical way to grind a variet of hard material such as concrete, stone and masony.

Features


5554

Boomerang brazed diamond cup wheel

Double raw brazed diamond cup wheel

Turbo sintered diamond cup wheel





ApplicationThis boomerang cup wheel is designed for smooth and balanced grinding in abrasive sandstone or soft concrete. Hard bond for longer life,lightweight for better control.

Features

Segment heightDiameter Segment size22.23mm / M1422.23mm / M14

125mm180mm

5mm5mm

* Concrete grinding* Stone grinding* Universal grinding

ApplicationAbrasive materials, screed.

Features

Segment heightDiameter Segment size22.23mm / M1422.23mm / M14

125mm180mm

5mm5mm

* Concrete grinding* Stone grinding* Universal grinding

ApplicationExcellent choice for finishing of hard materials.

Features

Professional diamond cup wheel

It is crucial to the success of your grinding and polishing jobs to select the diamond bond. Hard concrete means soft bond tooling is required. If a medium bond diamond is not cutting fast enough or is glazing over, you need to move to a softer bond diamond. Soft concrete means hard bond tooling is required. If you have a diamond that is wearing too quickly, you will need to select a harder bond in order to increase life span and production.

Choosing the correct diamond bond for different hardness materials

HARDNESS CHART

Diamond cup wheels are used for:• Concrete cleaning, thin coating removal, edging and concrete removal.• Cup wheels with fewer segments offer faster, more aggressive grinding.• Cup wheels with more segments provide smoother finishing and longer life.

Application

SOFT BOND DIAMOND

MEDIUM BOND DIAMOND

HARD BOND DIAMOND

VERY HARD BOND DIAMOND

Soft bond diamonds

for floors that have

been power troweled

or burned. For use on

hard concrete above

4500 PSI

Medium bond

diamonds for average

strength concrete

floors with strengths

between 3000 to

4000 PSI

Hard bond diamonds

for soft floors that

are less than 3000 PSI

or for coating and

epoxy removal

Very hard bond

diamonds for soft

floors that are 2500

PSI or below. Can also

be used for coating

and epoxy removal

Professional diamond grinding cup wheel

5756

T-CUP wheel

Self-sharpened segmentSmooth surface grinding and accurate toleranceHigh efficiency for dust exhausting

Segment numberSize Grit5”6”7”

8pcs12pcs14pcs

#25/30/40/80/120#25/30/40/80/120#25/30/40/80/120

Turbo cup wheel

Segment numberSize Grit4"5"6"7"

3pcs / 9pcs / 18pcs3pcs / 9pcs / 18pcs

3pcs / 9pcs / 10pcs / 18pcs9pcs / 10pcs / 12pcs / 18pcs / 24pcs

#25/30/40/80/120#25/30/40/80/120#25/30/40/80/120#25/30/40/80/120

Turbo Cup Wheels are fast grinding cup wheel and ideal for delivering a smooth finish. Performs light coating removal, concrete cleaning/restoration, and leveling of uneven spots. Moreover, Turbo Cup Wheels, with their ability to clean and smooth concrete, is a recommended step in the final preparation of concrete prior to coating.

Double row cup wheel

Double row cup wheels are an excellent and economical way to grind a variety of hard materials such as concrete, stone and masonry.

DescriptionSize Grit4"5"7"

Concrete grinding & Coating removalConcrete grinding & Coating removalConcrete grinding & Coating removal

#25/30/40/80/120#25/30/40/80/120#25/30/40/80/120

Professional diamond grinding cup wheel

Fan segment cup wheel

Fan segment cup wheel is suitable for Hilti DG150 Grinder. With special design, it has a good long life due to more diamond surface area.

Shallow dish cup wheel

Shallow disc cup wheels are mostly used for grinding and removal of Glue/Paint/Resin.

Segment numberSize Grit5"6"7"

5pcs / 7pcs5pcs / 7pcs8pcs / 12pcs

#25/30/40/80/120#25/30/40/80/120#25/30/40/80/120


10"

3pcs / 6pcs / 9pcs3pcs / 6pcs / 9pcs3pcs / 6pcs / 9pcs3pcs / 6pcs / 9pcs

#25/30/40/80/120#25/30/40/80/120#25/30/40/80/120#25/30/40/80/120


10"

9pcs / 18pcs9pcs / 18pcs9pcs / 18pcs9pcs / 18pcs

#30/40/80/120/150#30/40/80/120/150#30/40/80/120/150#30/40/80/120/150

Tornado segmented diamond cup wheel

Tornado segments for removing paint, thin Epoxy coatings and thin coatings of crystallized glue and mastic.

Coating removal diamond cup wheel

5958

The 6 Segment Cup Wheel has been designed with large beefy segments to enable aggressive removal of coatings and surface preparation. The large spacing between the segments provide for quick evacuation of debris and dust. The 6 seg cup wheel is available in 30/40 grit in order to provide flexibility over a wide range of surfaces without sacrificing tool life.

Turbo cup wheel for coating removing

The Arrow Cup Wheel is designed for aggressive grinding. The placement and orientation of the segments are designed for high stock removal while providing maximum tool life.

Arrow cup wheel for coating removing

The Rhomboid Cup Wheel is designed to remove thin mill floor coatings such as epoxy, glue, mastic and paint on SOFT or ABRASIVE concrete. The diamond bond matrix has been engineered with a unique proprietary blend of diamonds and other materials to provide a superior tool while maintaining long tool life.

Rhomboids cup wheel for coating removing

The Split PCD Cup Wheel segments are embedded with PCD "fragmented" pieces. This allows the segments to expose a constant sharp PCD edge for effective coating removal without leaving the aggressive profile left by traditional PCD segments.

Split PCD cup wheel for coating removing

DescriptionSize Grit4"5"7"

Concrete grinding & Coating removalConcrete grinding & Coating removalConcrete grinding & Coating removal

#25/30/40/80/120#25/30/40/80/120#25/30/40/80/120


5cs6pcs

10pcs

#25/30/40/80/120#25/30/40/80/120

#16/25/30/40/80/120

Segment numberSize Grit5"7"

3pcs / 6pcs3pcs / 6pcs / 9pcs

#25/30/40/80/120#25/30/40/80/120


3pcs / 6pcs / 12pcs3pcs / 6pcs / 12pcs / 18pcs

3pcs / 6pcs / 12pcs / 18pcs / 24pcs

#25/30/40/80/120#25/30/40/80/120#25/30/40/80/120

Trapezoid Grinding Plate


FeaturesFor coating removal and concrete preparation during the polishing process.Soft bond:made by soft materials, to grind hard concrete, the sharpness is betterHard bond:made by hard materials,to grind fresh concrete, the lifespan is longerMedium bond:not sure what concrete going to grinding please use middle bondGrit size: 6#, 16#, 30#, 50#, 100#, 150#, 200#

For coating removal and concrete preparation during the polishing process.Soft bond:made by soft materials, to grind hard concrete, the sharpness is betterHard bond:made by hard materials,to grind fresh concrete, the lifespan is longerMedium bond:not sure what concrete going to grinding please use middle bondGrit size: 6#, 16#, 30#, 50#, 100#, 150#, 200#

This product are efficient peeling of epoxy resin coatings, polyester resins, glue residuals, artificial resin sealing .They can be used with all popular floor polishing and grinding machines.


Standard Trapezoid Plate

Soft Bond Medium Bond Hard Bond Very Hard Bond


6160


FeaturesThe change system is quick, simple and safe. Unique fast cutting metal bond matrixExcellent for concrete preparation during the Polishing process.Grit size: 6#, 16#, 30#, 50#, 100#, 150#, 200#

The change system is quick, simple and safe. Unique fast cutting metal bond matrixExcellent for concrete preparation during the Polishing process.Grit size: 6#, 16#, 30#, 50#, 100#, 150#, 200#



EZ ChangeTrapezoid Plate


FeaturesThese redi-lock plate tool has quick change form different grit step by stepTraditional redi-lock design is very easy stalled on the holder place.Grit size: 6#, 16#, 30#, 50#, 100#, 150#, 200#

These redi-lock plate tool has quick change form different grit step by stepTraditional redi-lock design is very easy stalled on the holder place.Grit size: 6#, 16#, 30#, 50#, 100#, 150#, 200#

Redi-Lock Trapezoid Plate


PCD Coating Removal Plate And Adapter Plate

The adapter plates are designed to fit all popular floor polishing and grinding machines.They are eliminate the need for any tools to change or replace diamond tooling. Simplehand and finger leverage can remove the segments. This user friendly and time savingsystem helps save unnecessary wear and tear on the diamonds from possible tool damage.

1. Magnet Plate: 2. Holder Plate:

FeaturesFor use on all platform machines.Coatings removal/demolition.Floor preparation.High production.

Features6 pieces of trapezoid cavities.Stable way to install the diamond plate.Widely used to different grinding machine.

FeaturesEasily to slide on the diamond plateCan be used on Husqvarna diamond machine.

PCD Coating Removal Plate

Adapter Plate

Professional diamond floor grinding plate

6362

Application* Removal of wet dry adhesives and contaminated surfaces* Accurate grinding of large concrete areas* Smoothing and polishing concrete floors* Re-proofing of old concrete floors* Smoothing and polishing terrazzo surfaces* For all types of diamond grinding machines

Arrow type grinding plate

Multihole grinding plate Circle round grinding plate

Dia. Seg.Size Seg.No.250mm 20x15x8mm 20pcs


250mm 40x10x10mm 20pcs


64

Diamond Plug

We supplies a full range of diamond plugs to suit every machine and application, including Arrow, Flat, and PCD styles. All diamond plugs are available in a broad range of diamond mesh, sizes from 16# - 240#.

Arrow segmented diamond plug

Arrow segmented diamond plug is used for aggressive grinding application,such as surface grinding and coating removal. The ARROW segment design will provide fast production rates and leave a rough profile.

PCD diamond plug is used on grinding machines for very aggressive removal of glue, epoxy, coatings and concrete.

Diameter Segment height

2’’ #6, #16, #30, #60, #120

Segment No. Grit

10mm 3pcs/5pcs/6pcs

3’’ 12mm 3pcs/5pcs/6pcs

PCD diamond plug

Description PCD Size

Diamond plug PCD x3 3pcs

PCD No.

Full Round

Diamond Wire Saw

Diamond Wire Saw For Granite Quarrying Diamond Wire Saw For Marble Quarrying

Diamond Wire Saw For Granite Quarrying

Application & FeatureGranite quarry Diamond Wire could be widely used for all kinds of granite and sandstone mining and also could be widely used for all kinds of granite quarrying and for sandstone block squaring.

Model No Specification(mm) Cutting Material Line speed

(m/s)Cutting speed

(m2/h)Beads/m Fixed by Life(m2/h)

Soft Granite

Middle Hard Granite

Hard Granite

GQ115RS

GQ115RM

GQ115RH

φ11.5

φ11.0

40

40

40

Rubber

Rubber+Spring

25-30m/s

22-25m/s

18-22m/s

8-12m²/h

4-8m²/h

2-4m²/h

16-22m²/m

8-15m²/m

7-9m²/m

67

Diamond Wire Saw For Marble Quarrying

Application & FeatureMarble quarry Diamond Wire could be widely used for all kinds of Marble quarrying and also for Marble block squaring.


(m/s)Cutting speed


Soft Marble

Middle Hard Marble

Hard Marble

Soft Marble

Middle Hard Marble

Hard Marble

MQ115RS

MQ110RM

MQ105RH

MQ115RSS

MQ110RSM

MQ105RSH

φ11.5

φ11.0

φ10.5

φ11.5

φ11.0

φ10.5

40

37

33

Rubber

Rubber+Spring28

30

25-35m/s

20-35m/s

20-30m/s

25-35m/s

20-35m/s

25-35m/s

10-20m²/h

8-15m²/h

4-9m²/h

10-20m²/h

8-15m²/h

10-20m²/h

20-50m²/m

15-35m²/m

15-25m²/m

20-50m²/m

15-35m²/m

20-50m²/m

66

6968



Application & FeatureMarble quarry Diamond Wire could be widely used for all kinds of Marble quarrying and also for Marble block squaring.


(m/s)Cutting speed


Soft Marble

Middle Hard Marble

Hard Marble

MQ115SHS

MQ110SHM

MQ105SHH

28

30

φ11.5

φ11.0

φ10.5Spring Holding

25-30m/s

22-25m/s

18-22m/s

8-12m²/h

4-8m²/h

2-4m²/h

16-22m²/m

8-15m²/m

7-9m²/m

Diamond Wire Saw For Block Dressing


(m/s)Cutting speed


Soft Granite

Middle Hard Granite

Hard Granite

GBD11PS

GBD11PM

GBD11PH

37

40

Rubber

Plastic

φ11.0

φ10.5

25-30m/s

25-30m/s

25-30m/s

12-20m²/h

8-15m²/h

6-10m²/h

10-20m²/m

8-15m²/m

7-10m²/m


(m/s)Cutting speed


Soft Marble

Middle Hard Marble

Hard Marble

MBD105PS

MBD105PM

MBD105PH

37

40

Rubber

Plastic

φ11.0

φ10.5

30-40m/s

30-40m/s

30-40m/s

20-30m²/h

15-25m²/h

10-20m²/h

30-50m²/m

20-40m²/m

15-30m²/m

Diamond Wire Saw For Block Dressing


7170

Diamond Wire Saw For Profiling

Diamond Wire Saw For Profiling

Application & FeatureTo be widely used for granite and Marble block profiling, circular slabs cutting and special shape surface processing, with accurate size and nice appearance.


(m/s)Cutting speed


Soft Granite

Middle Hard Granite

Hard Granite

GP88PS

GP88PM

GP88PH

40

37

Rubber

Plastic

φ8.8

φ8.4

25-30m/s

25-30m/s

25-30m/s

10-20m²/h

8-15m²/h

7-10m²/h

15-20m²/m

10-15m²/m

7-10m²/m


(m/s)Cutting speed


Soft Marble

Middle Hard Marble

Hard Marble

Plastic

Plastic

Plastic

MP88PS

MP88PM

MP88PH

37

33

φ8.8

φ8.4

30-40m/s

30-40m/s

30-40m/s

20-30m²/h

15-25m²/h

10-20m²/h

30-40m²/m

25-35m²/m

15-30m²/m

Diamond Wire Saw For Reinforced concrete

The main cutting materials are concrete, reinforced concrete, steels, widely be used for cutting and dismantle of building, road, bridge etc.


(m/s)Cutting speed


Normally Concrete

Reinforced Concrete

Hard Marble

RC115

RC110

RC105

40 Rubber+Spring

φ11.5

φ11.0

φ10.5

20-30m/s

20-25m/s

20-25m/s

2-5m²/h

1-2m²/h

0.5-1.5m²/h

3-8m²/m

1-3m²/m

0.5-1.5m²/m

DDiamond Wire Saw For Reinforced concrete


7372

Multi-Wire Saw For Slab Cutting

Multi-Wire Saw For Slab Cutting

Application & FeatureTo be widely used for combination wire saw machine, and satisfy various kind of hardness of granite slab cutting, and also apply to marble slab cutting.


(m/s)Cutting speed


Soft Granite

Middle Hard Granite

Hard Granite

MW85PS

MW75PM

MW65PH

37 Plastic

φ8.0

φ7.2

φ6.3

25-32m/s 6-9m²/h 8-12m²/m

Vacuum Brazed Diamond Wire Saw Beads For Reinforced concrete

TCould be used for cutting of building like house, bridges,dam big post, cement pipesCutting under water bulidingsCutting steel structure

Model No Specification (mm) Cutting Material Line speed (m/s) Cutting speed (m2/h) Life (m2/h)

Reinforced ConcreteVBC110 φ11.0 25m/s 8m²/h 5-7m²/m

Vacuum Brazed Diamond Wire Saw Beads For Reinforced concrete


74

Vacuum Brazed Diamond Wire Beads For Marble

Vacuum Brazed Diamond Wire Beads For Marble


Model No Specification (mm) Cutting Material Line speed (m/s) Cutting speed (m2/h) Life (m2/h)

MarbleVBM110 φ11.0 25m/s 15m²/h 14m²/mSintering machine

Cold pressing machine

Laser welding machine

Brazing machine

Professional diamond tools manufacturer

catalogue 2019 - 2020 · premier application application our laser welded diamond blade are made of...

Documents