catalogue - retail price list

Keg King www.kegking.com.au

The Keg Dispense Specialists 2/33-35 Smith Rd

Springvale, VIC, 3171 Phone: +61 3 9011 1698 Fax: +61 3 9011 1697

of 52

LIMITED TIME OFFER - Free shiping for retail orders over $200 to capital cities

KegMaster–GrandDeluxe

This commercial grade under counter keg fridge that has been purpose built for kegs. Almost all other under counter fridges are too how in height to accommodate for full size kegs. The Grand Deluxe has been manufactured to suit beer enthusiasts, small bars, cafés and restaurants. It is also ideal as a portable service bar for trade shows or temporary events where the bar can simply be wheeled into place and is ready to use. It is fully clad with stainless steel and will look great in any environment. The powerful compressor and digital temp controller allows you to adjust the temp from -5C and up to 45C while the dual internals air circulation fans ensure the temp inside the fridge is perfectly even with no warm spots. The Grand Deluxe includes removable shelving so it can be used as an under counter fridge or half fridge and half keg fridge. The Grand Deluxe does not include any font/taps so you will have to fit these yourself but this is a relatively straight forward job. The bottom of the fridge slants slightly toward the drain hole where you can remove a bung (shown to right). This makes wash down and cleaning a simple job. The capacity of this unit is 500L and it will hold a massive 12 x standard Cornelius 19L kegs, or 3-4 x 50L kegs. Specifications:

• 500L Capacity • 1 Radiator fan and 2 Evaporator fans • Fully clad in 304 Stainless Steel • Includes castor wheels (rated to 300kg) • Digital temperature control (set range from -5C up to 45C) • Will fit up to 12 x Cornelius kegs or 3-4 x 50L Keg • Approx Internal Dimensions (hight x width x depth): 71cm x 117.5cm x 60cm • Approx External Dimensions (hight x width x depth):

101.5cm(with castors)/90.5cm(without castors) x 180cm x 80cm

Part Number RRP 006745 $2499.00




Page 2 of 52


KegMaster–Series3Includes:

• PREMIUM MKII CO2 regulator • Gas splitter for 2 tap and triple tap model • Single, double and triple font model available • 1, 2, or 3 Forward Sealing ABS Draft Taps included • Guard rail &Drip tray • Gas and beer line • Wire shelves • Castor wheels • CO2 cylinder mounting bracket • Some hose clips, tap tool, spare seals

Other Kegerators Features

• -4C and up to 28C • Air circulation fan and digital thermostat • Metal Floor Protector • 62cm (width) x 61cm (depth) x 91cm (height -

excluding guard rail, fount and drip tray) • Approx 164L fridge

Part Number RRP

006554 (single tap model) $589.00 004017 (double tap model) $599.00 006561 (triple tap model) $634.95

KegMaster–Series2 Includes:

• New MKII Premium CO2 Regulator • Single tap font • 1 x Forward Sealing ABS tap • Drip tray • Guard rail • Gas and beer line • Wire shelves • Castor wheels • Some hose clips, tap tool, spare seals • D-type keg coupler (CUB, Carlton Draft keg

coupler) Other Kegerator Features

• 50cm (width) x 60cm (depth) x 82cm (height - excluding guard rail, fount and drip tray)

• Approx 128L fridge





Page 3 of 52


A–TypeKegCoupler Includes:

• Beer and gas valve • Beer and gas barbs

Also known as German slider, Tooheys, Coopers, XXXX keg coupler.

Part Number RRP 004147 – Stainless Steel/Alloy $79.95

NickelCoated&FullStainlessSteelD-TypeKegCoupler Includes:


Also known as American sankey coupler, CUB, Fosters, Carlton Draft, VB coupler.

Part Number RRP

004130 – Nickel Coated Alloy $59.95 006196 – Full Stainless Steel $69.95

S-TypeKegCouplerIncludes:


Used for Heineken, Asahi, and some other imported and local beers.

Part Number RRP

004154 – Nickel Coated Alloy $59.95

LowProfileElbowBendThis low profile elbow bend is THE LOWWEST elbow bend available in Australia. It only sits 17mm above the top of the keg coupler. Perfect for tight spaces or inside a kegerator.

• Made from solid Stainless Steel (picture shown on coupler to right)

Part Number RRP

004765 $ 24.95




Page 4 of 52


Double&TripleTapChromeFont(withouttaps)Features:

• Internal foam insulation • 78mm diameter • Single: 300mm height (without taps) • Double: 310mm height (without taps) • Triple: 390mm height (without taps)

Note: Does not include draft taps as shown in photo (left&right)

Part Number RRP 004055 (single tap) $39.95 004062 (double tap) $59.95 004109 (triple tap) $79.95

Single,Double&TripleFontKit

(packedwithtaps,beerline,clamps,andfaucettool)This complete font kit includes font, beer taps, 4 meters of beer line per tap, some clamps and a faucet tool. We sell a single, double and triple tap font kit and the whole set of gear works out to be great value. Kit Includes

• Chrome plated font • ABS forward sealing taps • 4 meters of 5mm ID beer line per tap • Faucet tool • Stainless Clamps

Part Number RRP 006592 (single tap) $59.95 006608 (double tap) $89.95 006615 (triple tap) $115.95




Page 5 of 52


4Tap‘Tee’Font–CommercialGradeStainlessFeatures:

• Commercial grade 304 stainless Part Number

RRP

004161 $169.95

CobraDualTapFloodedFont–CommercialGradeFeatures:

• Fully flooded for use with glycol or water chiller Part Number

RRP

004178 $169.95

FontFanKitThese font fan kit is the easiest way to chill the font of your kegerator. The kit includes a 12volt power pack, the blower box that blows air up the provided tube into your font. The blower box can just sit in the kegerator as shown in the photo (to the right). This will cool your font down and reduce any foaming issues you might have caused by a warm font. The fan also increases air

circulation in the fridge which will help get your kegs in the fridge colder quicker. In many instances it will reduce the serving temperature of the beer by as much as 3 degrees Celsius. Part Number

RRP

004253 $49.95




Page 6 of 52


CarbonationCap This carbonation cap is a screw-on cap with an integrated Cornelius ball lock fitting. It is designed to fit onto most soft drink PET bottles. The carbonation cap is highly effective method to add and maintain carbonation in beverages for extended periods of time. Made from 304 Stainless Steel the carbonation cap will last years of use with virtually no maintenance. With this cap you can simply fill an old PET bottle with cold liquid of your choice and carbonate by connecting your gas ball lock disconnect. Make your own soda water, carbonate beer, or even make your own soft drinks.

Part Number RRP

005458 $14.95

CorneliusTypeBallLockPostforKegCouplerThese new parts are extremely handy so you can connect you ball lock disconnects to your keg coupler. The part is basically has a 5/8” thread on one side and on the other side it has a ball lock disconnect post. The part is completely made from solid stainless steel.

Part Number RRP

005465 (Gas) $14.95 005472 (Liquid/Beer) $14.95

DraftTaps

Above (left to right): Flow Restrictor Draft Tap(004093),Regular Draft Tap(004079), Long Shank Draft Tap(004086),Long Shank Tap with Flow Restrictor (004192) Right: Full Stainless Steel Brumby Style Tap with Stainless Handle (005533)

The regular draft tap is what you will need to attach to most fonts. The flow restrictor tap is similar to the regular draft tap with the main difference being able to control the resistance in the line with a leaver on the right hand side




Page 7 of 52


of the tap. We also offer a brumby style tap in Full Stainless Steel which is commercial grade. The long shank taps are for people who would like to make their own Kegerator or mount the tap into a cool room wall or fridge door. Just drill a 21mm hole and the shank will slot straight in. Part Number RRP 004079 (Regular Brumby) $29.95 004093 (Flow Restrictor) $49.95 004086 (80mm Shank Brumby)

$39.95

004192 (80mm Long Shank Tap with Flow Restrictor)

$69.95

005533 (Stainless Brumby) $49.95

NewForwardSealTypeTapsThese unique “seal forward” taps eliminate the need for a valve shaft like other less sanitary taps. Beer is not exposed to air so the handle does not stick and there is no build-up of mould and bacteria in the tap body. The polished interiors makes smooth flow to ensure perfect pour. These taps are available in a stainless steel (part#6332) and ABS plastic (part#6349) and long shank (part#6752). These taps include

shanks and are spring return so the tap closes when you let go the handle.

Part Number RRP

006332 (Stainless Forward Seal tap) $49.95 006349 (ABS Forward Seal Tap – short shank) $24.95 006752 (ABS Forward Seal Tap - 80mm long shank) $24.95

PlutoBeerGunwithBarbFittingThese pluto beer guns have become an iconic beer dispensing tool used throughout the industry.

We now offer 2 types. We have a full stainless steel type (as seen on left) and also a new plastic stainless composite (as seen on right). They both come with barbs so they will fit all standard beer line (4mm-6mm ID). The new plastic/stainless composite beer guns have a strong ABS plastic

body with stainless barb, stainless piston and stainless spring.Part Number RRP 004741 (full stainless) $69.95 005960 (plastic/stainless composite) $24.95

CounterPressureBottleFillerKit

Have you ever wanted to take some of your keg brew with you to a mates house? Now you can with the new Keg King Counter Pressure Bottle Filler.




Page 8 of 52


This type of bottle filling technology is normally only accessable to large breweries but now the same counter pressure filling tecneques can be used at home so you can fill you bottle of beer right from the keg to bottle with no exposure to oxygen, and without losing any carbonation, or loss of beer through fobbing. Features: Foam free filling from keg to bottle, bleed valve so to purge CO2 from the bottles that you fill, font mountable, barbs for CO2 inlet, beer inlet, and

blow off valve, will fit almost any PET soft drink bottle and many types of glass bottle.

Part Number RRP

004758 (20cm) $69.95

DomedStainlessSteelFalseBottoms

These false bottoms are great for anyone trying to make their own mash tun or lauter tun. The 30cm diameter type will fit into any 50L type keg including standard CUB(EURO Keg) or Tooheys (DIN Keg) designs. The 20cm diameter type is ideal for converting smaller pots or other vessels.

Features: Full stainless steel with 10mm stainless steel barb.

Part Number RRP

004581 (20cm) $54.95 004598 (30cm) $59.95

PolyesterBrewinaBagBagsandHopSocksThese polyester brew in a bag bags are perfect for grain brew in a bag or for hopping beer. Two sizes are available (both can be used up to 110 C). Large Brew in a Bag Bag with draw string: This is made to line your pot up to 55cm in diameter. (dimensions 80cm wide x 55cm deep)

Small Bag/Hop Sock: This is a tube of fabric that is 15cm in width and 75cm long. Both ends are open for easy cleaning and can simply be tied closed while being used. Perfect for grain or hops.

Part Number RRP

005342 – Hop Sock/Small Bag $4.95

Part Number RRP

005359 – Large Grain Bag $9.95




Page 9 of 52


PressurisedBeerLineCleaningBottlesThese bottles are the easiest solution to wash out your beer line. Just

screw the top off, put in your beer and line cleaning solution and attach your keg coupler. Once you have done this repeat step with warm water to flush solution out. Think of this item as a 1Litre keg that you use for cleaning solution. Available for D-type, A-type, S-type, and G-type keg couplers.

Part Number RRP

005540 (D-type, CUB, Fosters) $29.95 005557 (A-type, Tooheys etc.) $29.95 005564 (S-type, Imported Beer) $29.95 005571 (G-type, Imported Beer) $29.95

NestedMashBrewing60/40LPotsfor

SingleVesselBrewingThese single vessel brewing pots are great for mash brewing. The aluminium is more conductive than stainless pots making these pots idea for direct heat. The pots come as a set with a large 60L outter pot with lid and a nested inner 40L

inner pot that has a perforated false bottom. This allows you to place grain in the inner pot for mashing. When finished mashing simply lift out the inner pot and use the outter pot to boil. The assembly can also be used in conjuction with RIMS heat stick and pump to upgrade this to a recirculating system in the future.


SodastreamCylinderAdapterUse a Sodastream cylinder to dispense/carbonate your kegs. This is the ideal unit for the low volume user, or

someone who does not want to put a lot of capital into purchasing a larger CO2 Cylinder. The adapter fits between the soda stream cylinder and the CO2 Regulator as shown in photo above. Soda stream cylinder adapters are also great for small portable keg setups. Part Number RRP 004772 $ 22.95




Page 10 of 52


DeluxePartyPumpKit–(PicnicPump)Easy way to dispense a beer keg when you are away from electricity. No bulky CO2 cylinders to worry about. Just put the keg in a bucket of ice and pump the beer out at your own leasure. Features

• Ergonomic design • Easy to use • No gas cylinder required • No electricity reguired

Note: Does not include keg coupler or keg as shown in photo (left). These are sold separately. Beer must be consumed within 48 hrs of using the pump.

Part Number RRP

004048 $109.95

PartyPumpKit–(PicnicPump) This unit does exactly the same job as the “Deluxe Party Pump” with the main difference being the tap. The tap is just a plastic tap and beer line. Note: The price does not include keg coupler. This is sold separately.





Page 11 of 52


QualityStainlessSteel

ReinforcedBasePotThese stock pots are made from stainless steel with triple base construction. That means each base has a layer of aluminum inside to even out the temperature. This reduces the chance of scorching or caramelising your

wort. It also reduces the chance of boiling over. A good pot like this is an investment that will last you a lifetime. Features:

• 1.0 - 1.2mm thick stainless steel wall • Triple bottom base (stainless/aluminum/stainless) • Heavy duty handles • Included commercial grade lid

Part Number RRP 004536 (29 litre ) $ 199.00 004543 (46 litre) $ 245.00 004550 (66 litre) $ 299.00 004567 (92 litre) $ 369.00

HighPressureLPG/PropaneBurnersandRegulatorsThese high pressure burners kick out a huge amount of heat and are suitable for beer batch sizes up to 150L. The burner, stand and high pressure regulators are sold as separate components that you will have to assembly on arrival. The power of these burners will ensure you are not waiting all day for your brew kettle to get up to temp. Using the high pressure regulator you will be able to set the flame right down to a small simmer or right up to a roaring inferno giving you great range of control. Gas consumption between

0.5 – 4.5kg per hour LPG depending on the burn rate Features 1. Sturdy welded steel frame (200kg rating) 2. Powerful (up to 210,000 BTU/hr or 221MJ/hr or with high pressure regulator) 3. High pressure regulator with hose (sold separately) ( 0-210 kpa) Part Number RRP

006653 (Burner + Stand) $ 99.95 004659 (High Pressure Reg, 0-210kPa) $ 29.95

NEW LOW PRICE




Page 12 of 52


ResinTapHandles

Wanting to pimp up your taps. Try one of these coloured resin tap handles. Available in a wide range of colours as shown above. They will fit any one of our draft taps. Size: 145mm tall x 28mm diameter From left to right: Blue, Orange, Navy Blue, Yellow, White, Gree, Purple, Red, Black Part Number RRP 004024 $19.95

DoorMountedDripTraysFeatures:

• Made with high quality stainless steel • Excellent craftsmanship • Removable grill

Available in different widths

• 20cm Width (004420) • 30cm Width (004437) • 40cm Width (004444)

Part Number RRP 004420 (20cm) $56.95 004437 (30cm) $59.95 004444 (40cm) $63.95




Page 13 of 52


CounterTopDripTrayFeatures:

• Made with high quality stainless steel

• Excellent craftsmanship • Removable grill

Available in different widths

• 30cm Width (004468) • 60cm Width (004475)

Part Number RRP

004468 (30cm) $39.95 004475 (60cm) $59.95

WrapAroundDripTrayThese wrap around drip trays are made to suit our fonts. The drip trays wrap around the font to make sure they catch all of the drips. They also look great. There is 2 types, full stainless and stainless/plastic. Full stainless (left): 17.7mm x 30.5cm x 2cm deep (cut away diameter is 12cm) Plastic/stainless (right): 31.5cm x 20cm x 2cm deep

(cut away diameter is 9.5cm) Part Number RRP

004482 (plastic/stainless) $29.95 006684 (stainless) $39.95

FloodedDripTrayFeatures:

• Removable grill • Drainage hole • 33cm wide x 40cm deep

Part Number RRP 004406 NA

NEW




Page 14 of 52


2.6kgand6.0kgCO2GasCylindersFeatures:

• Australian Standard Approved • Hold 2.6kg or 6.0kg of gas when full • 47cm in height for 2.6kg and 71cm in height for 6.0kg • 2.6kg will fit in Keg Master Series 2 and Series 3

Kegerators without reducing the number of kegs it can hold • Comes with included carry handle for easy of transport and

protection of valve

Part Number RRP 004345 – 2.6kg Cylinder (Full) $199.00 2.6kg Fill $25.00 004352 – 6.0kg Cylinder (Full) $249.00 6.0kg Fill $50.00




Page 15 of 52


StainlessSteelConicalFementersFeatures:

• Fully rotatable rack arm • Silicone beaded seals • 304 Stainless steel • Polished finish

Ideal for yeast propagation, professional pilot plant, or serious home brewer. Please email us for drawing and specifications. Part Number RRP 006509 (50L) $899.00 007025 (100L) $945.95 006059 (300L) $3450.00 006790 (300L Jacketed) $4850.00 006066 (600L Jacketed) $6900.00

NEW




Page 16 of 52


QualitySolidStainless100mmWeldlessThermowellThis weldless thermowell is made from solid 304 stainless. It has a straight ½” BSP thread which is 40mm Long. It includes silicone o-ring, stainless steel slimline nut and also the extra long nut for mounting directly to our 3 inch dial thermometers.

This thermowell can also be used in conjunction with out digital temperature controllers. The probe will slight straight into the thermowell. Part Number RRP

005311 $34.95

Bi-Metal3”DialWeldlessThermometer–LongStemWith this Keg King bi-metal thermometer you can brew with confidence. The weldless fitting means it will mount to your mash tun, hot liquor tank, or kettle. The 132mm long probe means you will be able to get an accurate reading of the vessel temp in the middle. NOTE: This is also compatible with the thermowell above or the plastic push-in bulk head below. Features: Calibration screw, 304 stainless steel housing and probe, ½” BSP thread, includes slimline nut and 2xsilicone seals plus stainless washer, -5C to 100C customised for brewing. Part Number RRP 005328 $34.95

BulkheadforTemperatureProbeThis simple bulkhead fitting is made from plastic and can be used to mount your temperature probe from the temperature controllers or the 3” dial thermometers into a any thin wall vessel (such as a pot or fermenter. It will accept any temperature probe

or thermometer with 6-6.5mm diameter. It is sutable for temperatures up to 1050C. Part Number

RRP

005335 $12.95




Page 17 of 52


16ampTempControllerwithInbuiltAlarm,Heat&CoolIncludes:

• Temperature Probe • Instructions • Control Panel

Mounting Bracket Features:

• Broad temperature operating range (-45oC – 120 oC) and high accuracy.

• Comes with included temperature probe • 0.1 oC Accuracy • High and Low Temperature Alarm with Optional Alarm Delay • Celsius and Fahrenheit display option • Independent Heating and Cooling Delay Start Control • 16amp Heating or Cooling capacity • Inbuilt alarm • “Fridge On” or “Heater On” Indicator Icon

Part Number RRP

004246 $69.95

30WattHeatingBeltThe 30 watts will gentle warmth without creating a hot spot. Heating belts are preferable to heating pads for the reasons that they can simply be moved up or down the fermenter to increase or decrease the heat transfer to the brew. Heating belts are also preferable to heating pads because pads tend to heat up the yeast bed on the bottom of the fermenter which can produce some undesirable flavours in your beer.


KegKingChilloutMKIII-30

PlateHeatExchangerThe Chillout MKIII is the fastest way to chill your wort to yeast pitching temperature to get your fermentation off to a quick healthy start.

The Chillout is made from stainless steel and brazed together with pure copper. It also has ripples up and down each plate. This creates more surface area and improves heat transfer.

Dimensions: 315mm x 73mm x 73mm Part Number RRP 005304 $119.95




Page 18 of 52


14MeterStainlessSteelImmersion

ChillerThese stainless steel immersion chillers are an easy way to chill your wort. Simply connect standard ¾ inch BSP garden hose fittings to the end and run tap water through the chiller while immersed in your wort. This is idea for batch sizes up to 45litres. Dimensions: Coiled part of the chiller: 28cm high x 26cm diameter Total height of the chiller: 65cm 12mm x 14meter 304 Stainless with ¾” BSP female/male fittings

Part Number

RRP

006707 $195.00




Page 19 of 52


16mStainlessSteelCoolingCoilFeatures:

• Made from food grade 316 stainless steel • Ideal for chilling beer or creating your own jockey box

Specifications - Stainless: Food grade 316 stainless steel - Internal diameter: 6mm - External diameter: 8mm - Total Coil Height/Diameter: 19cm/25cm

Part Number

RRP

004116 $119

JockeyBox/MagicBoxCoolerKitThese jockey box kits include: - Long shank draft tap - 16meter stainless cooling coil - 2 x push in fittings to attach your beer line to the coils - Beer Line All you need to do is BYO esky and drill holes in your esky. If you want 2 taps in your esky you will need to purchase 2 kits. Kit’s include usage and assembly instructions. If you would like a PDF copy of the instructions just email us.

Part Number RRP

RET9644 $158.95




Page 20 of 52


10inchBeerFilteringSystemFeatures:

• Clear high pressure housing • Purge valve to expel air pockets • ½” BSP inlet and outlet • Includes brass ball valve • Brass threaded ports for durability • Compatible with other 10” filter systems

Note: Does not include filter cartridge. Part Number RRP 004512 $24.95

1MicronAbsoluteReinforcedWashable

CartridgeFeatures

• 10inch for compatibility • Indestructible PE reinforced plastic shell to protect your filter

from rupturing, or physical damage. • Washable (recommended wash with Sodium Percarbonate) • 1 micron absolute rated for most efficient filter action.


0.5Micronand2MicronStainlessSteel

DiffusionStone/AirStoneUse this 2 micron stone with an oxygen source or an aeration pump to provide your yeast with oxygen prefermentation. This 0.5 diffusion stone can also be attached to the end of your “gas in” on your keg with 50cm of tubing to rapidly speed up carbonation. CLEANING: This stone can be sanitised in boiling water and cleaned in a non-rinse sanitiser while running CO2 or air through the stone. If the pores in the stone get blocked from handling give a 10 second dip in hydrocloric acid before rinsing with water.

Part Number RRP 005298 (2 micron) $11.95 006660 (0.5 micron) $11.95




Page 21 of 52


KegKingCO2Regulators(0-80psi)Features

• Dual gauge • Australian standards • Easy to adjust • Included ball lock • Safety pressure release valve

Part Number RRP

004208(1 output) $59.95

MKIIDualGuageMultiGasRegulator

CO2,Oxygen,Argon,NitrogenThis new MK II regulator is made with high quality machined brass body and can be used on various different gasses. The regulator has large body for high flow rates and comes with precision diaphram for more accurate adjustment. Regulator also includes large adjustment know for easy adjustment. This regulator is can also be used on a range of different gasses including CO2, Oxygen, Argon, Helium and

Nitrogen. The standard “type 30” nut and stem comes fitted to the regulator for CO2 and CO2/nitrogen mixed gasses. Other nut and stems and be interchanged: Type 10 Nut and Stem (with ¼” thread NPT): Oxygen, Argon, Helium Type 30 Nut and Stem (with ¼” thread NPT): CO2, CO2/Nitrogen Mixed Gas Type 50 Nut and Stem (with ¼” thread NPT): NitrogenPart Number RRP 006325 - Multi Gas Regulator $64.95 006448 - (type 10 – nut & stem) $29.95 006042 – (type 30 – nut & stem) $29.95 006455 - (type 50 – nut & stem) $29.95 004321 – Replacement 0-3000psi Gauge $9.95 004338 – Replacement 0-80psi Gauge $9.95

Add-OnCO2RegulatorAdapterIdeal for dispensing two draft beers that require different CO2 pressures. Modular design makes expension easy. Simply remove the high pressure gauge from one regulator and screw this adapter. Then attach your other regulator directly to the

other side of this adapter. The two threads are ¼” NPT and Type 30 UNF to suit our CO2 regulators and many other Australian CO2 regulators.

Part Number RRP

006189 $ 24.95




Page 22 of 52


Beer&GasLine30mRollQuality beer/gas line. The internal walls are very smooth creating less turbulence. The 3 sizes available all have the same OD so it will easily fit any John Guest style push in fittings (5/16” or 8mm). The beer line comes in three different sizes 4mm, 5mm and 6mm ID. This line is also hydrochloric acid,

phosphoric acid, and caustic resistant. Part Number RRP 005083 4mm ID x 8mm OD - 30m Roll $25.00 005182 4mm ID x 8mm OD - Per Meter $0.99 005090 5mm ID x 8mm OD - 30m Roll $25.00 005199 5mm ID x 8mm OD - Per Meter $0.99 005106 6mm ID x 8mm OD - 30m Roll $25.00 005205 6mm ID x 8mm OD - Per Meter $0.99

FoodGradeClearVinylTubeThis food grade vinyl tube is sold per meter or by the 30m Roll. It is more malleable than the beer and gas line (above) and comes in three different sizes: 5mm ID x 8mm OD 10mm ID x 14mm OD 13mm ID x 17mm OD

Part Number RRP 6950 5mm ID x 8mm OD - 30m Roll $25.00 6967 5mm ID x 8mm OD – Per Meter $1.50 6974 10mm ID x 14mm OD - 30m Roll $40.00 6981 10mm ID x 14mm OD – Per Meter $1.95 6998 13mm ID x 17mm OD - 30m Roll $45.00 7001 13mm ID x 17mm OD - Per Meter $2.49

! NEW !




Page 23 of 52


JGStylePushinFittings We make all our push in fittings to suit 8mm (5/16) outside diameter (OD) beer and gas line. Just like the Beer/Gas line above. These push in fittings are suitable to be used up

to 100 psi. They are extremely easy to use and allow you to simply push your beer and gas line straight into these fittings. No need to purchase clamps. To remove the fitting simply push in the blue collet and the fitting comes undone. Part Number RRP

005410 – Push in Joiner $5.95 005397 – Push in Tee Piece $5.95 005403 – Push in “Y” Piece $5.95 006424 – Push in Ball Valve $9.95 005380 – Push in Elbow $5.95

8mmPushinFittingsforMFLDisconnects&5/8BSP

ThreadThese great little adaptors screw directly onto your keg setup. They allow you to push your beer/gas line with 8mm OD (5/16”) directly into the fitting. This makes it easy to disconnect the beer/gas line at a later stage and it eliminates the need to use hose clamps. We have two sizes. The smaller type (shown on left)

that will fit MFL Quick Disconnects and also larger ones that suit 5/8” BSP thread that is on our keg couplers, tap shanks and many other beer related fittings.Part Number RRP

006004 – Push in for MFL Disconnect $4.95 006011 – Push in for 5/8” Thread $5.95

StainlessSteplessClampsThese stainless clamps are the best for securing your beer and gas line to barbs/nipples. Unlike other hose clamps the secure the line in a complete and exact circle. Hence the name “stepless” clamps. We have two sizes. The 6-8mm will suit our 5mm and 6mm ID beer line. The 7-10mm ID will suit our 4mm ID beer line.

The clamps can be secured with a special crimping tool however normal wire cutters work just as well. Part Number RRP RET0764 (suit 6-8mm OD) $0.50 RET0771 (suit 7-10mm OD) $0.50




Page 24 of 52


GasLineSplittersThese gas line splitters are sold as single pieces as shown in picture on the left. By purchasing more pieces you can split your gas line into as many outputs as you like. The fittings just simply push into each other and require no clips, or additional parts. Simple to make a 4 way line splitter

as shown below. Features:

• Easy to use and assemble • Modular so you can keep adding

more lines if needs be. • Made from high strength food grade

plastic. • Come with brass barbs.

Part Number RRP

004123 $9.95

4Output/4WayGasLineManifoldSplitterwithCheck

ValvesThese gas manifolds are rated to 100psi and include 4 gas line outputs and 4 x 1/4inch ball vales. Multiple of these can be easily joined together to make large manifolds of 8 or 16 outputs. They are made complete from aluminium, brass and stainless so you know they are durable. They also include screw holes at the top for easy mounting to your gas board.

Each ball valve also includes a built in check valve to not only protect your regulator but also prevent gas or beer migrating from one keg to another. Part Number RRP

006677 $49.95

! NEW !




Page 25 of 52


CarbonationKegLidwith2MicronDiffusionStoneEasiest way to carbonate your beer. The keg lid with built-in carbonation stone! Move the lid from keg to keg to carbonate as needed. This lid allows fast force carbonation with the minimum of effort. The lid comes with 60cm hose and stone already attached.

Features: • Stainless Steel 0.5 Micron Diffusion Stone • Keg Lid with Stainless Ball Lock Post • Silicon keg Lid seal • Assembled and ready to use

Part Number RRP

00 6479 $49.95

RangeofSiliconBungsThese silicon bungs do not perish or leach chemicals or aromas like rubber bungs. They are made with food grade silicon and can handle temperatures up to 180C. They also have excellent chemical resistance to a wide range of acid and alkaline cleaners and sanitisers.

Available Sizes (small diameter x large diameter): • 28mm x 34mm (30mm thick) • 44mm x 53mm (40mm thick) • 68mm x 82mm (41mm thick) • 75mm x 91mm (41mm thick)

Part Number RRP

006851 - 28mm x 34mm $5.95 006868 - 44mm x 53mm $6.45 006875 - 68mm x 82mm $19.95 006882 - 75mm x 91mm $19.95

! NEW !




Page 26 of 52


CheckValves/OneWayGasValve/NonReturnValveEvery keg setup should have one. This handly device will ensure you protect your regulator against reversal of flow in your

lines. We have two types available. The white ones (shown in picture to left) come with brass barbs so that they will suit several different gas lines irrespective of the outside diameter (OD). These will also push straight into

our gas line splitters. We also sell an 8mm push in type (seen above in black) so that if you are using 8mm OD gas line the line then it will push directly into the fitting without the need for any clamps. Part Number RRP

004789 (with brass barbs) $9.95 005991 (8mm push in type) $9.95

6mmPolyJoiners/Tees/ElbowsThese poly fittings are made from food grade Poly Ethylene making them an inexpensive way for you to join or split your gas or beer line.

• Rated to 100psi • Will fit beer/gas line with 4mm, 5mm, and

6mm ID • Made from food grade poly ethylene which

will not taint your beer like other plastics.

Part Number RRP

005120 - Poly Tee $1.49 005137 - Poly Joiner $1.49

KegOpening

Tools

Photos above from left to right above: Part #:004666 – D-type & S-type keg opening tool for CUB, Fosters, Asahi, Heineken Part #:004673 – A-type keg opening tool for Tooheys, Coopers, XXXX type kegs. Part #:006523 – Spear compression tool for circlip installation/removal Part Number RRP 004666 $119.95 004673 $119.95 006523 $299.00




Page 27 of 52


NewandReconditionedStainlessSteel50LKegs We sell second hand 50L kegs for $40 to $100 depending on the condition and type. We also stock brand new kegs sold without the spear and sell the a-type and d-type screw in spears separately. S-type M-type and U-type spears can be purchased on special order. All new kegs are made to EURO standard and are made with stackable chimes. Circlip type spears and can be made on request.

Part Number RRP Second Hand Kegs NA 005755 -Brand New 50L Keg (no spear) $105.00 005762 - A-type Spear $22.00 005779 - D-type Spear $22.00

TamperProofKegSeal–BreweriesOnlyThese tamper proof kegs seals are a great way to keep to top of the keg spear clean in transport as well as providing visual proof that the keg has not been tampered with. The tamper proof keg seal must be broken in order to attach the keg coupler. We supply keg seals in light grey which can be written on with felt tip pen or labelled with a sticker. The kegs seals come in two sizes for A-type spears or S-type and D-type Spears. Keg seals are a product that we strictly sell to breweries or microbreweries only. Part Number RRP D-type & S-type Keg Seal NA A-type Keg Seal NA

! NEW LOW PRICE !




Page 28 of 52


58LitreStainlessKeggle These brand keggles are made for the avid home brewer. The keggles are made from solid 304 stainless steel. The 1.5mm thick stainless is heavy enough to take some beating and also thick enough to be heated by direct fire (such as the LPG burner part #: 006653). The keggles are 41cm diameter and 59cm high with 33cm opening at the top. The keggles include the ½” large bore 2 piece ball valve. Other options can easily be fitted to the keggle such as:

1. 30cm domed false bottom for Mash Tun conversion. This will require parts: Part #: 004598 – 30cm False Bottom Part #: 005496 – Short piece of silicon tube Pert #: 005717 – ½ Female x 13mm barb to fit inside of keggle

2. 3” Bi-Metal Dial Thermometer Requires part #: 005328

3. 2200 Watt Element for HLT or electric kettle conversion Requires part #: 004727

4. Thermowell conversion This just requires part #: 005311


! NEW !




Page 29 of 52


Second

Hand/Used

BallLock&Pin

LockKegs These kegs are sold as is. They are pressure tested and may contain some residual syrup. These do not have ring-pull

pressure relief.

BrandNew

BallLock

Kegs These new kegs are sold in 2 different sizes: - 9.5 Litre (21cm Diameter x 34cm High) - 19Litre (21cm Diameter x 62cm High)

19LPinLockKegs These kegs us pin lock disconnects (Part no: 5366/5373). They are slightly larger in diameter (22.6cm) and slightly shorter (58cm) than regular Cornelius type ball lock kegs. The pin lock kegs do not come with the pressure release valve with ring pull, they come with a relieve valve which simply pops out at approx 100 psi. To relief pressure manually you can push down the poppet on the gas post. These kegs can be converted back to ball lock kegs with our Cornelius posts (part: 5212 and part 5229), you just need to unscrew the pin lock posts and attach ball lock posts.

You can purchase these pin lock kegs as they are (part 5847) or alternatively with replacement posts so you can convert them back to ball lock kegs (part 5854) Part Number RRP

004802 – 19L Second Hand Ball Lock Keg

$65.00

004819 – 19L Keg Brand New $99.00 004864 – 9.5L Party Keg Brand New $99.00 005502 – Replacement Keg Lid with PRV & Silicon O-ring

$19.95

005847 – 19L Used Pin Lock Keg $49.95 005854 – 19L Used Pin Lock Keg with Pair of Ball Lock Posts

$59.95

NeopreneKegParka/JacketMade of durable neoprene, these keg parkas will keep your beer cold for hours without the need for a bucket of ice. We have two sizes. The larger size will fit

straight over any 19L keg and the smaller size will fit any 9L keg. They will fit any kegs that are between 20-24cm in diameter. Perfect for parties or picnics, or anytime the keg is out of the fridge as it will help to maintain a cold temp in your keg for hours. Put a couple ice packs in between the keg and jacket and it will be even colder.

Part Number RRP 005946 – Parka for 19L Kegs $24.95




Page 30 of 52


005953 – Parka for 9L Kegs $19.95

CorneliusKegSparePartsandDisconnects(Compatible with new and second hand kegs that

we sell)

Part Number RRP 004833 – Grey Ball Lock Disconnect Barb $6.95 004840 – Black Ball Lock Disconnect Barb $6.95 005267- Grey Ball Lock Disconnect MFL Thread $6.95 005274 – Black Ball Lock Discnnct MFL Thread $6.95 005281 - Nut & Barb-MFL Disconnect $4.95 005366 - Grey Pin Lock Disconnect Barb $9.95 005373 - Black Pin Lock Disconnect Barb $9.95 005977 – Gas Pin Lock Disconnect MFL Thread $9.95 005984 - Liquid Pin Lock Disconnect MFL Thread $9.95 005212 – Cornelius Type Gas Post $5.95 005229 – Cornelius Type Liquid Post $5.95 005250 – Silicon Hatch/Lid O-ring $4.95 006417 - Cornelius Keg Lid Pressure Relief Valve $3.95 006820 – Keg Lid Foot $1.49 Part Number RRP 005236 – Post O-ring $0.29 005243 – Dip Tube O-ring $0.29 004826 - Poppet $1.49




Page 31 of 52


KegCO2ChargerKitThis keg charger kit is just what you need to charge your keg on the run. Small enough to fit into your palm making it the first choice for your portable keg setup. Simply screw on the MFL threaded disconnect (part 5267 or 5977), attach to your keg, and press the trigger to charge the keg. The kit includes 1 x 16gram CO2 cartridge. Replacement CO2 cartridges can also be purchased. Part Number RRP 005908 – Keg Charger Kit + Cartridge $19.95 Part Number RRP 005939 – Spare 16gram Cartridge $1.95

PremiumRegulatedCO2ChargerUnlike the cheaper charger kits made from plastic this little charger kit is made from machined anodised aluminium. The charger kit is very compact but is just large enough to house a very small regulator. No need to worry about pressing the trigger on the charger too much or too little, just use the regulator to set the pressure and forget. Simply screw on the MFL threaded disconnect (part 5267 or 5977), attach to your keg, and set the dispense pressure. Photo to right: Kit does not include disconnect or 16g cartridge. These have to be purchased separately (part# 5939) Part Number RRP

006844 $49.95

! NEW !




Page 32 of 52


MFLTapShankAdaptorThe MFL Shank Adaptor (photo to right) is what you need to connect your draft tap directly to your MFL disconnect (will work with both ball lock and pick lock disconnects). Suitable for tap models 004079, 005533, and 006332.

These allow you to make a very compact portable setup as shown in photo to the left.


MaltMuncherGrainMillThe MaltMuncher Grain Mill is constructed using materials that will last a lifetime. Cold rolled steel for the rollers, 6061 Aluminum body and hopper and oil impregnated brass bushings.

FEATURES: * Includes, hopper and crank handle * Width and roller diameter is optimized for use with power drill * Adjustable rollers at both ends to give uniform crush * 12 TPI knurl to efficiently pull grain through rollers while leaving hull intact to form an excellent filter bed for sparging

Part Number RRP 005441 $189




Page 33 of 52


TheKeggomaxCMRefluxStillThe Kegomax Reflux Still is easily one of the best Coolant Management (CM) reflux stills available today. It’s a professional grade still that produces exceptional spirit with a high level of purity (up to 95% ethanol). Features:

• Achieve 95% Alcohol • Fully stainless steel design • Able to be use with large 50L Keg Boiler • Huge reflux column means high purity spirit • Superior design and exceptional performance • Copper packing to release sulphides

Includes:

• Thermometer • Stainless steel and copper packing • Bung

Mounting hardware is sold separately.

Part Number RRP 004680 Reflux still

$299.00




Page 34 of 52


KeggomaxRefluxStillMountingHardware The Reflux still comes without any mounting hardware as shown in the photo below in “Option 1”. If you chose option 1 you will be able to weld the Keggomax reflux still directly to the top of your boiler or alternatively tap a thread into your boiler and screw the still directly into it. The second Option is to purchase the tri-clover clamp which will enable you to easily attach the Keggomax Reflux Still to the top of your keg boiler. The third option is to purchase the 2 nuts that will simply screw onto the lid of your boiler.

Part Number RRP

004697 - Tri-Clover Fitting for Keg Boiler $29.95 004703 - Nuts for other boiler $9.95 004956 – Spare O-ring For Tri-Clover Mounting Hardware

$9.95

006493 – Tri Clover Clamp for Keg Boiler $17.95

TheKegBoilerThese 50L Keg Boilers are made from commercial grade 316 stainless steel. They are ideal for people wanting to take advantage of the efficiencies related to distilling on a large scale. The Keg Boilers are made from second hand 50L kegs. The keg vary in type shape and condition. Features:

• Commercial grade 316 stainless steel • 50L Capacity

Includes:

• 2200 watt element • Power cord





Page 35 of 52


TheKeggomaxFMRefluxStill

(PatentPending)The Kegomax FM Reflux Still is an all new reflux still design that is made from borosilicate laboratory grade glass, stainless steel and copper. The still is able to produce extremely high grade neutral ethanol and is extremely easy to operate. It can also be automated using one of our pre-wired temp controller boxes (part#004239 or part#004246). The reflux still has been designed so that it can be used with the boiler below. If you choose to make your own boiler the still can be easily attached to a 50L keg using the tri-clover clamp (part#006493) and the keg fitted with an element (part#004727). The reflux still includes:

• Digital thermometer • Copper Condenser • Stainless universal coupling to connect to Turbo Boiler

or the top of a commercial 50L keg. • 13mm Barbs to attach regular garden hose to the

copper condenser. Part Number RRP

005069 $219.95

TurboBoiler-2000wattThe turbo boiler is a great way to boil your wash for distillation and can also be used for boiling water or wort for beer making. The boiler comes standard with a 47mm hole to suit the “Still Spirits” stills (such as the T500) and to suit our Keggomax FM reflux still. We also can provide separately lids with no hole, or lids with 60mm hole to suit the Pure Distilling stills. Features

• Concealed element for easy cleaning • Boil dry protection • Large 35L capacity • Made from stainless steel • Handy Tap • Solid Lid with Silicon Seal


! NEW !

! NEW !




Page 36 of 52


2200WattStainlessSteelHeatingElementThese heating elements are powerful and perfect to make use on your boiler. The element is made from 304 grade stainless steel. This element also has a weld free design meaning that you can easily install it by simply drilling a hole in your pot/keg/boiler of approximately 32mm and tightening a nut from the outside of the pot. The diameter of the element at the widest point is 38mm so it is ideal if you need to pass the element through the neck of a keg to make a keg boiler. This element also works extremely well with our heat sticks (part number #006226) if you are planning on making a RIMS recirculating system. Features:

• Powerful 2200 Watt • thread:32mm, flange:40mm, length element

only:290mm, diameter: 25mm • Food grade silicone seal

The element also come with a food grade high temperature silicone seal and a power cord is sold separately. Part Number RRP 004727 Element $44.95 004734 Power Cord

$7.95

RIMSHeatStickHeatExchangerHousingThis heat stick housings make is very easy to build a RIMS recirculating mash system. They have been made with TIG welded 50mm stainless pipe with 2 x ½” BSP female sockets at right angles in the top and bottom for the wort to flow in and out. On one end there is a tri-clover end cap with a 32m hole pre-drilled so it is ready to mount one of our 2200watt elements (part #004727). The top of the heat stick has a 20mm hole so it is ready to mount either a thermowell (part #005311) or bulkhead (part #005335). This makes it very easy to then use a temp controller (part#004246) and pump (part#005861) to build your own re-circulating RIMS system. Features: * Solid TIG welded from 304 stainless * Silicon beaded seal * Easy to disassemble with tri-clover clamp Part Number RRP

006226 $249.95




Page 37 of 52


StainlessSteelMale/FemaleQuickDisconnectsThese male quick disconnect couple with the stainless female quick disconnects below. They come in three different types from left to right. Left: 1/2” BSP Male Thread (005625) Middle: 13mm Barb (005632) Right: 8mm Barb (005649)

Female quick disconnects come in three different types from left to right: Left: 13mm Barb (005588) Middle: ½” BSP Male Thread (005601) Right: ½ BSP Female Thread (005595)

StainlessSteelBarbedFittingsStainless steel barbs Left: ½” BSP Female x 13mm Barb (005717) Right: ½”BSP Male x 13mm Barb (005700)

OtherStainlessParts

From Left To Right: Stainless Nut ½” BSP (005724) Stainless Elbow Bend ½” BSP (005670) Stainless Pipe with Internal ½” BSP Thread - 33mm Long (005663) Stainless Pipe with External ½” BSP Thread - 35mm Long (005656) Stainless Tee with Internal ½” BSP Thread (006233) Ball Valve ½” BSP Large 14mm Bore (005618) Part Number RRP 005625 $9.95 005632 $9.95 005649 $9.95 005588 $14.95 005601 $14.95 005595 $14.95 005717 $4.95 005700 $4.95 005724 $4.95 005670 $4.95 005663 $4.95 005656 $4.95 006233 $4.95 005618 $15.95




Page 38 of 52


SiliconandStainless½”BSPWashersThese washers are compatible with any ½” BSP plumbing hardware. They come in silicon for sealing things and stainless. Silicon: 21mm(ID) x31mm(OD) x 2mm (thickness)

Stainless: 21mm(ID) x33mm(OD) x 3mm (thickness) Part Number RRP

005885 (Stainless)

$1.95

005892 (Silicon) $0.95

½”BSPStainlessBallValveAssembly(toportpot/keg)

This ball valve is sold as a complete assembly (shown in picture on left ) so all you have to do is drill your 20mm hole in your keg, pot or vessel wall and you can fit this ball valve. This is a full port ball valve with a 14mm bore which allows maximum flow rate

through the ball valve. The valve comes with Teflon tape already on the nipple, a silicon o-ring which is seated in the ½” BSP nut. The seat in the nut prevents the o-ring from rolling out of place when tightening. As shown to top right the 1/2” BSP Male x 13mm Barb (#005700) can be fitted to the ball valve (purchased separately) so you can attach any 11-14mm ID type hose (such as our silicon hose #005496). On the inside of the vessel the ½” BSP nipple usually protrudes approximately 16mm meaning you can attach an elbow (purchase separately #5670) to the inside of the vessel so it draws from the bottom (as shown to the right). Part Number RRP

005748 $34.95

! NEW !




Page 39 of 52


PortableRefractometerwithATCThis refractometer is used to measure the density of your beer or wine. Many brewers prefer to use this instead of a hydrometer because they find it quicker and easier to get an accurate reading. This model comes with ATC (Automatic Temperature Compensation) Wine: Measure the brix level (sugar level) in your grapes with just one drop! The perfect vineyard tool for monitoring ripening grapes. Use them after the crush to get an exact brix reading.

Features: • 0-30 brix scale • 0-1.120 specific gravity scale • Metal body with rubberised grip • Adjustable focus eyepiece with rubber grip • ATC (Automatic Temperature Compensation) Allowing you to use the

refractometer between 10 – 30 degrees Celsius so the temperature of the sample is irrelevant.

NOTE: This tool is used to measure unfermented wort. Once alcohol is present in the wort, the use of a correction table is advised. Part Number RRP 004222 $59.95

HeadmasterBeerGlass

Pint/Schooner/425mlorPot/Middy/285ml These Crown Glassware Headmaster Beer Glasses have the weights and measures approves. They are commercial grade solid glassware that does not chip or break easily. The nucleation process acts like a catalyst to the beer and keeps it bubbling for longer than it would in an untreated glass. With the head of the beer lasting all the way to the bottom of the glass, it provides a more enjoyable beer for the drinker and reduces wastage. Printed with the Headmaster logo, these nucleated glasses are easily distinguishable. Buy a box of 24 Units for a bulk discount. Buy more and get a cheaper price!

Part Number RRP

RET9507 425ml (single) $1.95 RET9491 425ml (box of 24) $24.95 RET9484 285ml (single) $1.95 RET9477 285ml (box of 24) $22.95

! NEW !




Page 40 of 52


SiliconHose/TubingThis silicon hose is resistant to constant high temperatures and has excellent chemical resistance. The soft silicon is great for transferring beer from fermenter to keg and will fit onto the standard fermenter tap or standard 13mm hose barbs. The soft silicon easy to work with and seals very well. It is also recommended for handling spirits and for distillation applications as it does not leach plasticisers like vinyl tubing.

Internal diameter is 11.5mm and outside diameter of 18mm. Please note that this hose should not be used for higher pressures above 20psi (such as mains water pressure). The hose has a burst pressure of approximately 35psi. Part Number RRP

005496 (per meter) $4.95

25mm&12mmScrewTypeHoseClamp

This screw type hose claps are often used in laboratory equipment to shut off or control the flow of liquid through flexible hose. For beer brewing they are fantastic for adjusting the flow of wort in your mashing system or fly sparging. The 25mm size is suitable to use with the silicon hose (#5496). No need to cut your hose or feed the hose through the clamp. The gate on one side of the clamp swings opens and you can place the clamp over any part of the hose. The 12mm size can also be used to make small adjustments to balancing your keg system, simply place over your beer line and tighten the clamp to apply more flow resistance.Part Number RRP

006622 (25mm) $4.95 006639 (12mm) $4.95

!NEW!




Page 41 of 52


HandMadeHardwoodMashPaddle

This is an Australian made product made from Australian hardwood. These mash paddles are beautifully hand made in Melbourne and will ensure you never get dough balls in your mash again. The perfect gift for any mash brewer or yourself. Part Number RRP 005830 $69.95

StainlessSteelMashPaddle

These stainless steel mash paddles are tig welded together from 304 stainless. They are very robust and suitable for stirring large mash batches. The paddle will ensure you never get dough balls in your mash again. The perfect gift for any mash brewer or yourself. The paddle is 73cm in length with a paddle head with dimensions of 26cm x 14cm. Part Number RRP

006691 $49.95




Page 42 of 52


HighTemperatureMagneticDrivePolysulfonePumpVoltage: 220-240 at 50-60hz Max Head: 3.4m Max Flow: 19L/min Wiring: Not wired Fittings: 13mm Barb(part# 5861) or ½”BSP (part# ) available This pump is constructed of food-grade materials, handles boiling wort. The impeller housing is made from polysulfone because it is a tough, food-grade plastic rated up to 120C. The magnetic drive acts as a clutch allowing the user to put backpressure on the pump to slow down flow. Since it is magnetic drive, it’s not self priming, you must put the pump under the level of the liquid source. This is an extremely efficient 1.1amp pump which can be run continuously at elevated temperatures. The magnetic drive ensures no lubricated bearings are in contact with the liquid at all, so you can be sure there is no chance of any contamination of the liquid being pumped, which is why this pump is ideal for home brewing. Part Number RRP 005861 (13mm Barb) $64.95 006806 (1/2” BSP) $64.95

HighTemperatureMicro12vDirectDriveBrownPumpVoltage: 9-14V (higher performance at higher voltage) Max Head: 3.2 meters (at 12v) Max Flow: 7.2L/min (at 12v) Wiring: Not wired Threads: Threads are standard ½” BSP These economical little pump is made from food grade fibre reinforced plastic and is rated up to 105C. It very compact in size measuring 92mm x 64mm x 45mm. The 12v power requirement means that they are safe to wire yourself. They only draw 0.65amps and have high flow rate for such a small pump. A good option for small brewers looking for an inexpensive way to build a recirculating system. The axle is also lubricant free so there is virtually no maintenance or lubricant to get into your beer. Part Number RRP

006356 $23.95

!NEW LOW PRICE!




Page 43 of 52


WortAerator-AirPumpOnlyThis aeration pump is designed to work with the 2 micron sintered stainless stone. The output side of the pump fits our 4mm ID beer line. Lack of aeration is often the reason for sluggish fermentation or poor attenuation. Good aeration can be achieved using this pump and will greatly increase the health of your yeast especially in their aerobic stage. Simply plug pump into your wall and put the stainless air stone into your fermenter for 15 min. To clean and sterilise the air stone simply put in boiling water and store in clip lock bag. Part Number RRP

005922 $19.95

WortAerator-AirPumpKitThis aeration kit includes the air pump, sintered stainless stone, and the 0.20 micron autoclavable air filter. This complete assembly will ensure that you get the best possible aeration in your wort which will lead to faster fermentation, better attenuation and healthier yeast in general. The included 0.20 micron air filter will also ensure that the air that you put into your wort is pure and free from any bacteria. Simply dip the air stone into your fermenter and let it bubble in your fermenter for 30 minutes.


0.2MicronAirFilterThese 0.2 Micron Air Filters will filter out microbes and bacteria. They can be used in many different ways. They can be used with our wort aerator pumps (above) so you can aerate your wort, or can be used as an airlock in the top of your fermenter. They can also be used to filter air going back into a cask when dispensing real ale. This filter is not suitable for liquids and should be discarded if it gets wet. Part Number RRP

006721 $5.95




Page 44 of 52


BorosilicateErlenmeyerFlasksThe best brewers make large yeast starters to get their beer fermenting fast. Large populations of active yeast help ensure flavorful beer free of off flavors. Erlenmeyer flasks are made from borosilicate so you can move directly from gas stove top to ice bath for cooling without it cracking. This reduces the risk of contamination when transferring from one container to another. NOTE: It is not recommended to use directly on electric heating element. Only use gas. Warranty on this product does not include breakage if you break the product. Part Number RRP

006158 (1000ml) $9.95 006370 (3000ml) $24.95 006165 (5000ml) $39.95

ReagentBottles&MeasuringCylindersThese Reagent Bottles (left) and Measuring Cylinders (right) are made from the same laboritory borosilicate as our Erlenmeyer Flasks. These 500ml Regent Bottles are ideal for the boiling and storage of wort for your starter. Simply place in microwave to sterilise wort then cap and put in fridge until you need to make your starter. The whole bottle can be autoclaved. The measuring cylinders have volume of 250ml with 2ml graduations for accurate measurements. Part Number RRP

006387 (reagent bottle) $4.95 006394 (measuring cylinder)

$9.95

AutoEasySyphon44cm&65cmThese syphons are an easy way to transfer your wort from one vessel to another. They are easy to use and come apart for cleaning. Simply pump the handle a couple time to start the syphon. The syphon includes about 1 meter of vinyl tube and a sediment reducing tip. Part Number RRP

006738 (44cm) $15.95 006813 (65cm) $19.95

!NEW!




Page 45 of 52


PivotingMagneticStirBar&NeodymiumRareEarth

MagnetsThese 28mm magnetic stir bars (part #006240) are suited to use with the above conical flask. If you would like to make your own stir plate you can use use a small computer fan and the neodymium magnets (part#6257) to make a magnetic stirrer. Alternatively if you prefer to purchase a professional laboratory adjustable magnetic stirrir these are available below (part#6714 ). Using a magnetic stirer is easy and will optimise the growth of your yeast starter in the conical erlenmeyer flasks. These button magnets are neodymium with high level of magnetic flux. They are 8mm diameter and 6mm thick. Part Number RRP 006240 (stir bar) $4.95 006257 (button magnet) $2.95

AdjustableMagneticStirrerMachineThis adjustable magnetic stirrer is ideally used with the stir bar above (part#4240). Simply plate your yeast propigation flask ontop of the stir plate and drop in the stir bar. Switch on the machine and adjust the spin speed. Part Number RRP 006714 $79.95

!NEW!




Page 46 of 52


PhosphoricAcidBlendSanitiserThis sanitiser is completely food grade and non-rinse. The formulation is highly concentrated and will make over 300Litres when diluted. You can also re-use the sanitiser over and over again making it even more cost effective. The phosphoric acid blend provides a unique killing system, unafected by organic soils and delivering a low foaming formulation with optimum coverage and penetration. The formulation is made to impart no off-odors or flavours. Unlike other sanitisers it is non-staining, non-corrosive on stainless and stable over a wide range of teperatures. This sanitiser comes packaged in a convenient 2 chamber mixer container so you can easily measure the required amout simply by squeezing the bottle. Part Number RRP

005519 (300ml) $9.95 006202 (20L Cube) $199.95

100%PureSodiumPercarbonate(400grams)Sodium percarbonate is 100% active ingredient so it is pretty powerful stuff. Sodium percarbonate uses active oxygen to penetrate carbon or protein soils and has a high kill rate on wide range of micro-organisms making it an effective sanitiser as well as cleaner. This is a fantastic product for use on all brewery equpment including beer lines, pots, fermenters, heat exchangers. It will effectively remove beer stone & dried up yeast. Sodium percarbonate it gradually decomposes into not-toxic, environmentaly safe, food grade elements. It decomposes into oxygen, sodium carbonate & water. Part Number RRP 006172 (400gram Jar) $6.95 006141 (1kg bag) $9.95

CausticSoda(SodiumHydroxide)–1kgBagA cleaner that is fairly dangerious to use but still the first choice for many wineries and breweries. It’s ability to dissolve and remove a wide range soils, oil, grease and stains makes it a good choice when other cleaners are not effective. Safe to be used on stainless but some other soft metals will disolve when using this stuff. Use with caution. When used in combination with sodium percarbonate(hydrogen peroxide) the combined cleaning effect is extremly effective. Part Number RRP 006288 $4.95




Page 47 of 52


DecalHolder–SolidChromePlatedBrassis up to 162mm in diameter. Part Number RRP

006028 $19.95

TungstenCarbideTipped(TCT)HoleSaws(25mmDeep)These Tungsten Carbide Tipped (TCT) Holesaws are the ideal solution to your metal cutting needs. Designed for steel and stainless steel. For drilling stainless there is simply no alternative to TCT holesaws. We have 3 different sizes. They can also drill through wood, plastic, steel and many other materials. These are sold as full assembly so no arbour is needed. The handy spring built into the holesaw pilot ejects the core after drilling. NOTE: To extend the life of the holesaw it is important to use cutting lubricant or

WD-40 while drilling. For maximum holesaw life use under 300 RPM when drilling stainless steel or steel. Part Number RRP 006110 (20mm diameter) $29.95 006127 (22mm diameter) $29.95 006134 (32mm diameter) $29.95




Page 48 of 52


Icemaster105™–IceBank/TempriteCoolerThe Icemaster 105 is a commercial grade icebank cooler that is extremly compact yet offers high performance for small to medium volume customers. This unit is ideally suited to small bars, cafés, and restaurants. The unit can also be converted to a glycol chiller with a small modification to the thermostat. The chiller includes a impeller and pump ready to flood the font of your choice. Features * Impeller + pump * 4 stainless product lines ( 4 x 20meters x 8mm (5/16”)) * Brushed stainless steel finish Specifications Size: 450mm x 450mm x 750mm Ice Bank capacity: 10.5kg Refrigerant: r12/13 Weight (full/empty): 60kg/10kg Capacity: 60L in first hr @ 20C Pump: 18L/Min Power: 240v, 380 Watts Part Number RRP 006219 $799.00

100StripPHTestKits

FullRangePH0toPH14

&

NarrowRangePH3.8to

PH5.4

No more calibration or spilling buffer solution. The handy test strips just dip straight into your samble and wait 10 seconds for the colour change. Easy, reliable and fast indication of PH.

The narrow range test kit is specifically chosen for beer brewing with a ph range between 3.8 and 5.4 so you can more accurately determin mash ph. Part Number RRP

006585 – PH0 – PH14 $9.95 006837 – PH3.8 – PH5.4 $6.95

! NEW !




Page 49 of 52


FreedomOne™SodastreamAdapterHose-36”This handy hose attachment will allow you to connect one of our 2.6kg or 6kg CO2 cylinders to your sodastream machine. This adapter also includes a handy pressure guage so you can see how much pressure is left in yor CO2 cylinder.

With the FreedomOne Adapter you can enjoy a seemingly endless supply of soda and a fraction of the cost of your regular CO2 refills. Part Number RRP

RET9637 $149.95

Sparkeltap–ContinuousChilledSparkling/Still

Water What a fantastic convenience. Chilled sparkling and still water at a fraction of the cost of bottled water or bottled sparkling water. Enjoy chilled sparkling water without the hassle of lugging heavy bottles home from the supermarket. Now anyone can enjoy this simple pleasure at the pull of a tap. If you like carbonated water then you will lover the sparkeltap. The Sparkeltap an undercounter water carbonator and chiller. The reliable and compact unit will supply endless chilled sparkling water to your office, restaurant, home or bar. Download the Sparkeltap Info Sheet by Clicking Here Specifications:

• Includes dual tap font with soda line and chilled water line, undercounter chiller and carbonation unit, gas line, 1/2” BSP water splitter and other necessary hoses.

• Chills soda and still water down to 2C • Can chill and carbonate up to 20L per hour • Undercounter unit: 24cm Wide x 31cm Deep x 42cm High





Page 50 of 52


28gHaynesLubri-FilmPlus–FoodGradeLubricantHaynes Lubri-Film Plus is a heavy duty sanitary lubricant with extended performance, low friction properties. This lubricant is NSF rated and FDA approved for food contact. The lubricant minimises downtime, extends the life of moving parts and will not dry or gum on equipment. It cleans off equipment easily. Specifications:

• Odour and taste free, beer safe • Sanitary • Non-toxic • Food grade • Will not effect beer head retention

Part Number RRP

006905 $3.95

UniversalSiliconFaucetTapSpoutPlugThese unique silicon faucet plugs are a universal size so they suit any tap fauce of diameters 10mm up to 17mm. The plug is an economical solution for controlling fruit flies, yeast and bacteria bulidup when the faucet is not in use. The silicon compound is resistant to caustic and acid based cleaners as well as high temperature so it is dishwasher safe. Features:

• Food grade silicon • Fits all Keg King taps, pluto guns, fermenter taps, and

many other tap designs Part Number RRP

006912 $2.45

! NEW !

! NEW !




Page 51 of 52


StainlessButterflyandWireHoseClampsButterfly Clamp Butterfly worm style hose clamps (shown to left) come with a tab on them making it easy to tighten and loosen the clamp by hand. We supply the 14-25mm size. Multiple clamps can be attached together end-to-end if larger diameter is required.

Wire Hose Clamps In some circumstances wire hose clamps are preferable over worm style hose

clamps as they do not pinch the hose like worm clamps do. There are three different sizes of wire clamps available: 9-12mm 11-14mm 15-18.5mm Part Number RRP

RET1464 (9-12mm wire clamp) $1.45 RET4212 (11-14mm wire clamp) $1.45 RET4229 (15-18.5mm wire clamp) $1.45 006929 (14-25mm butterfly hose clamp) $0.95

TheULTIMATEGrowler–2LitreThis growler is made from 304grade stainless steel that is completely impervious to oxygen or sunlight (UV) meaning your precious amber liquid is in the absolute best storage container possible. Vacuum Wall Insulated Unlike other growlers this growler comes with double wall vacuum insulation to give you insulation like no other growler. So forget taking the esky, this baby will stay cold for hours. Sprung Wire Lid for Best Pressure Holding Capacity Most screw cap growlers struggle to hold the pressure required to keep beer fresh and carbonated. The ULTIMATE Growler comes with spring wire lid capable of holding up to 40psi.

Part Number RRP

006936 $29.95

! NEW !

AVAILABLE SOON




Page 52 of 52


Alcometers&Hydrometers

These alcometers and hydrometers are calibrated at 20C. The glass alcometer/hydrometer comes in a cylinderical transparent tube that you can use to take samples and float the alcometer/hydrometer in. The alcometers can acurately measure alcohol water mixture from 0% up to 100% The hydrometers are made with a 3 scales and have a specific gravity range from 0.80-1.115 Part Number RRP

RET0580 – Alcometer (0-100%) $7.95 RET0597 – Hydrometer (3 Scale) $7.95

! NEW !

catalogue - retail price list

Documents