Attendees should have minimum 18 months in machinery vibrations that routinely

use single-channel instruments according to established procedures, set-up

instruments, and maintain a database of results.

Certification Fees

• Vibration Severity• Alarm Set-up (Narrowband , Envelope)• Baseline Assessments, Trending• Route/Task Planning• Alternate Technologies (e.g. Oil Analysis, Wear Debris Analysis, Infrared Thermography, Motor Current Analysis, Acoustic Emission)• Recognition of Baseline Variations• Alarm and Trip Level Determination• Integrated Health Analysis

• Basic Spectrum Analysis• Spectral Harmonics and sidebands• Time Waveform Analysis• Phase Analysis• Transient Analysis• Orbital Analysis• Shaft Centre-line Analysis• Enveloping• Mass Unbalance• Misalignment• Concentricity Errors• Mechanical Looseness• Rubs• Instabilities• Shaft Bow• Bearing (Rolling Element, Journal) Defects• Electric Motor Defects• Gearbox Defects• Resonance and Critical Speeds

Corrective Action Recognition: (2 hours)

• Shaft Alignment• Concentricity• Balancing• Basic Maintenance Action• Lubrication

Acceptance Testing: (2 hours)• Test Procedures• Specifications and Relevant Standards• Acceptance Test Reporting

Equipment Testing and Diagnostics: (2 hours)• Impact Testing• Forced Response Testing (e.g. Coherence, Transfer Function)• Modal Analysis• Process Safety

Reference Standards: (1 hours)• Relevant International (ISO, IEC), National and Regional Standards

Reporting and Documentation: (1 hours)• Vibration CM Reports• Machine History Records• Decision Making and Recommend Action

Fault Severity Determination: (3 hours)

• Levels (Overall, Narrowband, Component)• Spectrum Analysis• Time Waveform and Orbit Analysis• Severity Charts, Graphs, Formulae

Theoretical Rotor and Bearing Dynamics (1 hours)• Rotor Characteristics• Bearing Characteristics

Field Balancing: (2 hours)• Single-plane• Two-plane

Vibration Institute and Certification ProgramVibration Institute’s vibration analyst certification program was accredited by the American National Standards Institute in March 2010. ANSI is the premier organization that coordinates the implementation of national and international standards. Accreditation by ANSI ensures that the Institute’s vibration analyst certification program and process is fair, consistent and maintains the highest standards to assess the qualifications of professionals in a non-subjective manner.

For more informationMr. Sumate (+66 85-669-4622)Condition Based Maintenance DivisionMaintenance and Industrial Management CenterThai-German InstituteTel: +66 2 784 6666 or +66 38 215 033-44 ext. 1800 – 1806Fax : +66 2 784 6689 E-mail: mt.center@gmail.com or http://www.tgipmt.com

25,000 THB (exclude VAT 7%)

Category II Vibration Analyst Certification

Examination in accordance with ISO 18436-2:2003

Category II Body of Knowledge

Who should attend?Technical Superintendent / Chief / Mechanic / Electrician, Maintenance Manager/

Staff who involve in direct maintenance, trouble shooting of rotating machinery

and want to enhance knowledge in best maintenance program and continuous

improvement.

6 April, 2012 13:00 - 16:00Thai-German InstituteChonburi, Thailand

• Basic Motion• Period, Frequency• Amplitude (Peak, Peak-to-Peak, RMS)• Measurements (Displacement, Velocity, Acceleration)• Units, Unit Conversions• Time Orbital and Frequency Domains• Vectors, Modulation• Phase• Natural Frequency, Resonance, Critical Speeds• Shaft and Casing Vibration

Vibration Principles: (2 hours)

Fault Analysis: (6 hours)

Signal Processing: (4 hours)

Condition Monitoring: (2 hours)

• Analogue and Digital; Sampling• FFT Application• Windows (Uniform, Hanning, Flat-top)• Filters (Low pass, High Pass, Band Pass, Tracking)• Anti-aliasing• Band-width, Resolution• Noise Reduction• Averaging (Linear, Synchronous Time, Exponential)• Dynamic Range• Run-out Compensation

Proctor: Jack D. Peter

Vibration Institute’s instructor and

Certified Category IV vibration analyst

Thai-German Institute, 700/1 Moo1 Amata Nakorn Industrial Estate,Bangna - Trad Rd., Km 57 T.Klongtamru, Muang, Chonburi 20000 , Thailand

Company Name ...............................................................................................................................

Application

TGI Member ID ...............................................................................................................................

Address of recipe ...............................................................................................................................

...............................................................................................................................

Telephone ...............................................................................................................................

Fax ...............................................................................................................................

Contact person ...............................................................................................................................

E-mail ...............................................................................................................................

Name ............................................................... Position ...............................................................

Name ............................................................... Position ...............................................................

Name ............................................................... Position ...............................................................

Not TGI Member