cats and dogs QuiltSze: 40” x 55”| Design by: Marinda Stewart | Level: CONFIDENT BEGINNER

Free Pattern available on michaelmillerfabrics.com

p. 212.704.0774 | f. 212.633.0272 | info@michaelmillerfabrics.com | www.michaelmillerfabrics.com

CX6929 LimeHigh Society

Fat 1/8

CX4768 LimeadeLunch Box3/8 yard

CX7615 AquaLil’ Doggie3/8 yard

CX0482 WhiteClown Check

1/2 yard

CX6929 AquaHigh Society

Fat 1/8

CX7256 CoralTiny Stitches

Fat 1/8

CX7615 ClementineLil’ Doggie

Fat 1/4

SC5333 CoralCotton Couture

Fat 1/8

CX6929 ClementineHigh Society

3/8 yard

CX1065 DalmatianGarden Pindot

Fat 1/8

CX5456 BlackPaw Prints3/8 yard

SC5333 CaribbeanCotton Couture

Fat 1/8

CX7615 LimeLil’ Doggie

Fat 1/8 & 2 7/8 backing

CX5514 EbonyPinhead3/8 yard

CX4768 AquaLunch Box

Fat 1/8

SC5333 KryptoniteCotton Couture

Fat 1/8

12 Kits 24 KitsCX6929 Lime 1 1/2 yards (1 bolt) 3 yards (1 bolt)CX6929 Aqua 1 1/2 yards (1 bolt) 3 yards (1 bolt)

CX6929 Clementine 4 1/2 yards (1 bolt) 9 yards (1 bolt)CX7615 Lime 1 1/2 yards (1 bolt) 3 yards (1 bolt)CX7615 Aqua 4 1/2 yards (1 bolt) 9 yards (1 bolt)

CX7615 Clementine 3 yards (1 bolt) 6 yards (1 bolt)CX5456 Black 4 1/2 yards (1 bolt) 9 yards (1 bolt)

CX4768 Aqua 1 1/2 yards (1 bolt) 3 yards (1 bolt)CX4768 Limeade 4 1/2 yards (1 bolt) 9 yards (1 bolt)

CX7256 Coral 1 1/2 yards (1 bolt) 3 yards (1 bolt)CX1065 Dalmatian 1 1/2 yards (1 bolt) 3 yards (1 bolt)

CX5514 Ebony 4 1/2 yards (1 bolt) 9 yards (1 bolt)CX0482 White 6 yards (1 bolt) 12 yards (1 bolt)SC5333 Coral 1 1/2 yards (1 bolt) 3 yards (1 bolt)

SC5333 Caribbean 1 1/2 yards (1 bolt) 3 yards (1 bolt)SC5333 Kryptonite 1 1/2 yards (1 bolt) 3 yards (1 bolt)

CX7615 Lime (Backing) 34 1/2 yards (3 bolts) 69 yards (5 bolts)

FABRIC REQUIREMENTS

Cats and Dogs

Quilt designed by Marinda Stewart

Size: 40” W x 55” H

Skill Level: Confident Beginner

Note: This quilt is constructed using (8) vertical rows

Fabrics Yardage Cutting

CX6929 Lime

High Society

Fat 1/8* (2) 5 ½” square

(4) 3 ½” square

CX6929 Aqua

High Society

Fat 1/8* (2) 5 ½” square

(6) 3 ½” square

CX6929 Clementine

High Society

3/8 yard (2) 5 ½” square

(6) 3 ½” square

(2) 1 ¾” W x 10 ½” H **

CX7615 Lime

Lil’ Doggie

Fat 1/8* (2) 6” square

(2) 5 ½” square

CX7615 Aqua

Lil’ Doggie

3/8 yard (2) 6” square

(2) 5 ½” square

(2) 1 ¾” W x 10 ½” H **

CX5456 Black

Paw Prints

3/8 yard (5) 2 ½” x W.O.F. – binding

CX4768 Aqua

Lunch Box

Fat 1/8* (2) 5 ½” square

(6) 3 ½” square

CX4768 Limeade

Lunch Box

3/8 yard (1) 5 ½” square

(4) 3 ½” square

(12) 1 ¾” x 10 ½”

CX7256 Coral

Tiny Stiches

Fat 1/8* (2) 5 ½” square

(6) 3 ½” square

CX1065 Dalmatian

Garden Pindot

Fat 1/8* (4) 5 ½” square

CX5514 Ebony

Pinhead

3/8 yard (4) 5 ½” square

(12) 1 ¾” x10 ½”

CX0482 White

Clown Check

½ yard (9) 5 ½” x 10 ½”

SC5333 Coral

Cotton Couture

Fat 1/8* (2) 6” square

(3) 3 ¼” circles ***

SC5333 Caribbean

Cotton Couture

Fat 1/8* (2) 6” square

(3) 3 ¼” circles ***

SC5333 Kryptonite

Cotton Couture

Fat 1/8* (2) 6” square

(3) 3 ¼” circles ***

CX7615 Lime

Lil’ Doggie

2 7/8 yards Backing – see directions – one-

way print

CX7615 Clementine

Lil’ Doggie

Fat 1/4 (2) 6” square

(2) 5 ½” square

* A piece of fabric 9” x 22”

** Cut vertically – one-way print

*** See pattern

Also Needed: 48” x 65” batting, threads to match, scissors, straight pins, rotary cutter, acrylic ruler,

mat, and fusible web.

Directions:

1. Sew together (1) each 1 ¾” x 10 ½” pieces of CX4768 Limeade, CX7615 Aqua, CX6929

Clementine, CX5514 in order left to right. Keep motifs upright. Make (12) 5 ½” x 10 ½” units

total. Set aside.

2. For large pinwheel block units – place one CX7615 Lime 6” square right sides together

on top of one SC5333 Kryptonite 6” square. Draw a diagonal line from corner to corner. Sew ¼”

on each side of the drawn line. Cut apart on the drawn line. Press. Trim each half square

triangle unit to an accurate 5 ½” square. Repeat with the remaining CX7615 Lime and SC5333

Kryptonite 6” squares. Make (4) total. Repeat using CX7615 Aqua and SC5333 Caribbean 6”

squares and CX7615 Clementine and SC5333 Coral 6” squares. Set all aside.

3. For small pinwheel blocks (5 ½” square) repeat the process in Step #2 using CX4768

Aqua 2 ½” squares and CX6929 Aqua 3 ½” squares. Trim each half square triangle to an

accurate 3” square. Sew (4) half square triangles together, as shown, to make (1) 5 ½” square

pinwheel. Make (3) pinwheel blocks total. Repeat using CX7256 3 ½” squares and CX6929

Clementine. Make (3) 5 ½” blocks. Repeat using CX4768 Limeade and CX6929 Lime. Make (2) 5

½” blocks total. Set all blocks aside.

4. Trace (9) 3 ¼” circles onto the paper side of the fusible web. Rough cut out. Iron (3) each

on SC5333 Coral, Caribbean, and Kryptonite. Cut out. Remove paper backing, Iron one circle

onto the right side of one CX0482 5 ½” x 10 ½” piece as shown. Using matching thread, hand or

machine stitch around the raw edges of the circle. Machine satin stitching was used in this quilt.

Make (3) each of Caribbean, Coral, and Kryptonite. Set aside.

5. To assemble quilt by row from top to bottom:

Row #1 – Start with a Lime 5 ½” half square triangle, add another Lime 5 ½” half square triangle

as shown. Refer to photo. Next, add a CX4768 Aqua 5 ½” square, followed by a CX5514 5 ½”

square. Add a 5 ½” x 10 ½” stripe unit, followed a CX7256 5 ½” square and end with a 5 ½” x 10

½” stripe unit. Keep motifs upright.

Row #2 – Sew the remaining (2) Lime 5 ½” half square triangles together as shown. Add a

striped unit, a 5 ½” Coral pinwheel, a 5 ½” x 10 ½” Coral circle unit, CX7615 Aqua 5 ½” square,

CX1065 5 ½” square, and a Lime circle unit. Sew row to right side of Row #1.

Row #3 – CX7256 5 ½” square, Aqua circle piece, CX6929 Aqua 5 ½” square, CX1068 5 ½”

square, CX7615 Clementine 5 ½” square, stripe unit, Aqua 5 ½” half square triangle. Refer to

photo for placement. End with a CX6929 Clementine 5 ½” square. Join to quilt.

Row #4 – Begin with a stripe unit followed by a CX7615 Clementine 5 ½” square. Add another

stripe unit followed with an Aqua 5 ½” pinwheel. Add an Aqua circle block. Follow with (2) Aqua

half square triangles to complete the large pinwheel as shown. End with a CX5514 5 ½” square.

Join to quilt, matching seams as needed.

Row #5 – Sew an Aqua pinwheel to the bottom of a CX7615 Lime 5 ½” square. Add a Lime circle

block followed by a CX4768 Limeade 5 ½” square. Add a stripe unit, followed by a CX5514 5 ½”

square and a CX6929 Lime 5 ½” square. End with a stripe unit. Join to the quilt.

Row #6 – Sew a CX4768 Aqua 5 ½” square to the bottom of a stripe unit. Add (2) Coral 5 ½” half

square triangles as shown, followed by a CX6929 Lime 5 ½” square and a CX1065 5 ½” square.

Add a Coral 5 ½” pinwheel, a Coral circle block, and end with a CX6929 Aqua 5 ½” square. Join

to the quilt.

Row #7 – Sew a stripe unit to the bottom of a CX6939 Coral 5 ½” square. Follow with (2) Coral 5

½” half square triangle units. Refer to photo for placement. Add a Lime circle block. Follow with

a stripe unit, a Coral 5 ½” pinwheel, and a CX5514 5 ½” square. Join to quilt.

Row #8 – Sew a CX7615 Aqua 5 ½” square to the bottom of a Lime pinwheel. Follow with an

Aqua circle block, a stripe unit, and Aqua pinwheel, a CX7615 Lime 5 ½” Square, CX1065 5 ½”

square, and a stripe unit. Join to quilt.

6. For backing, from CX7615 Lime – cut (1) W.O.F. x 66” piece. Remove selvage edges.

From the remaining yardage cut (2) 6” wide pieces vertically. Sew together across the 6” edge.

Keep motifs upright. Sew pieced strip to one side of the 66” piece. Trim off excess to make

approximately 50” x 66” piece.

7. Layer backing, batting, and quilt top. Baste.

8. Quilt as desired.

9. Bind quilt using CX5456 2 ½” wide strips, pieced as needed for length.

Kit Info

(12) Kits (24) Kits

CX6929 Lime 1 ½ yards (1) bolt 3 yards (1) bolt

CX6929 Aqua 1 ½ yards (1) bolt 3 yards (1) bolt

CX6929 Clementine 4 ½ yards (1) bolt 9 yards (1) bolt

** CX7615 Lime 1 ½ yards (1) bolt 3 yards (1) bolt

CX7615 Aqua 4 ½ yards (1) bolt 9 yards (1) bolt

CX7615 Clementine 3 yards (1) bolt 6 yards (1) bolt

CX5456 Black 4 ½ yards (1) bolt 9 yards (1) bolt

CX4768 Aqua 1 ½ yards (1) bolt 3 yards (1) bolt

CX4768 Limeade 4 ½ yards (1) bolt 9 yards (1) bolt

CX7256 Coral 1 ½ yards (1) bolt 3 yards (1) bolt

CX1065 Dalmatian 1 ½ yards (1) bolt 3 yards (1) bolt

CX5514 Ebony 4 ½ yards (1) bolt 9 yards (1) bolt

CX0482 White 6 yards (1) bolt 12 yards (1) bolt

SC5333 Coral 1 ½ yards (1) bolt 3 yards (1) bolt

SC5333 Kryptonite 1 ½ yards (1) bolt 3 yards (1) bolt

SC5333 Caribbean 1 ½ yards (1) bolt 3 yards (1) bolt

Backing: CX7615 Lime 10 ½ yards (1) bolt ** 21 yards (2) bolts **

** Includes amount for piecework listed above