cctr- 8 11 vehicle gps t racker
TRANSCRIPT
CCTR-811 Vehicle GPS TrackerWelcome to use Real Time GPS tracker CCTR-811, This product is with GPS module and GSM
module, It has many new and unique functions, the basic function is: real time uploading current location
to server, display history tracking on website, listen & monitor sound around the tracker, break geo-fence
(in or out area) alarm, over speed alarm, power down alarm etc. Also it has email & SMS sending alarm
function, move alarm & shock alarm, SMS locating with internet link map or text description location or
Longitude & latitude , and the other function are also very especial, such as small & thin metal case for
easy installation, external GPS & GSM antenna for better signal, built in shock sensor to control power
saving, built in rechargeable Li-battery life is 1-2 days (standby mode), emergency SOS help, etc. Some
function can be used without platform (SMS located, over speed alarm, move alarm, shock alarm etc.)
With GPS and GSM, the tracker sends the present location information through GPRS to internet
server, so that user visit the website www.999gps.com with the given user name and password through
any computer with internet, and without downloaded any software. And it can help to arrange the whole
fleet or the vehicles of company or group or personal vehicles with the anti-hijack function.
Call the tracker or send SMS to the tracker also can trigger the tracker send back location with
internet link map or text description location or Longitude & latitude by SMS.
And also user use mobile phone visit website: www.999gps.mobi with the vehicle name and check
password (defined in the Terminal management), the last location information & location map will display
on your mobile phone.
It can be used as tracking cars, company vehicles, buses, taxis, trucks, outside workers, moving
equipments, transportations etc.
Tracking Platform: www.999gps.com
Demo user name: 123456 , Password: 123456 .
NoteNoteNoteNote:ThisThisThisThis manualmanualmanualmanual cancancancan bebebebe downloadeddownloadeddownloadeddownloaded onononon thethethethe platform,platform,platform,platform, afterafterafterafter logonlogonlogonlogon thethethethe platformplatformplatformplatform ((((UUUUserserserser cancancancan
useuseuseuse personalpersonalpersonalpersonal useruseruseruser namenamenamename &&&& passwordpasswordpasswordpassword totototo logon,logon,logon,logon, alsoalsoalsoalso demodemodemodemo useruseruseruser name:name:name:name: 123456123456123456123456 &&&& password:password:password:password: 123456123456123456123456
cancancancan bebebebe usedusedusedused totototo logon),logon),logon),logon), clickclickclickclick thethethethe menumenumenumenu ““““DownDownDownDown filefilefilefile”””” onononon thethethethe rightrightrightright toptoptoptop cancancancan downloaddownloaddownloaddownload thethethethe latestlatestlatestlatest versionversionversionversion
ofofofof thethethethe platformplatformplatformplatform operationoperationoperationoperation manualmanualmanualmanual &&&& andandandand trackertrackertrackertracker operationoperationoperationoperation manual,manual,manual,manual, itititit hashashashas WordWordWordWord &&&& PDFPDFPDFPDF version,version,version,version,
pleasepleasepleaseplease seeseeseesee thethethethe description,description,description,description, thethethethe manualmanualmanualmanual isisisis onlyonlyonlyonly suitsuitsuitsuit forforforfor thethethethe trackertrackertrackertracker whichwhichwhichwhich manufacturemanufacturemanufacturemanufacture datedatedatedate isisisis latelatelatelate
thanthanthanthan thethethethe description,description,description,description, pleasepleasepleaseplease notenotenotenote this,this,this,this, thethethethe oldoldoldold versionversionversionversion pleasepleasepleaseplease contactcontactcontactcontact us.us.us.us.
Parts List & Description
Before Using
1. Install SIM card
Press the yellow switch button on one side of the tracker main unit with a tool, the SIM card
holder will come out. Pull it out and put the SIM card in the holder and then push the holder into the
tracker again (Pay attention: the SIM card metal contact pin can not face down to the holder, please
see the picture) , if the SIM card is not installed properly, the green LED on the tracker will keep ON,
an the tracker can not work properly.
Note: 1. This tracker use 2G GSM network, and it upload tracking only through GPRS, it can not
work in CDMA network or 3G network. (Some 3G SIM card can use 2G GSM network,
this kind of SIM card can be used in the tracker)
2. Please confirm the GPRS function is enabled, and the APN has been set, some network
also need set GPRS user name & password. (Call the mobile company to confirm)
2. Power ON / OFF
� When power is OFF, install the battery in or connect the power wire to 12V or 24V, the tracker will
power on automatically.
� When the battery voltage in the tracker is too low, the tracker will power off automatically.
3. LED flash indicator
GREEN LED Flash once : GSM & GPS working well
GREEN LED Flash twice : GSM working well and no GPS signal
GREEN LED Flash three times : GSM & GPS working well but battery low
GREEN LED Flash four times : GSM working well, battery low and no GPS signal
GREEN LED ON continuously : GSM searching network
GREEN LED OFF continuously : Power off
GREEN LED Flash fast : Incoming a call or sending SMS
RED LED Flash once : Uploading current tracking
RED LED Flash twice : Can not upload tracking now
4. Recharge and power supply
� For CCTR-811, the tracker only uses the 9-32V DC power supply, too high voltage or AC voltage
may damage the tracker or even cause accidents, it is necessary connecting to car battery all the
time, after the backup battery is full, the built in recharging circuit will stop recharging, and if the
tracker is not move, the tracker will go to sleep, then the tracker will cost few power and will not
make the car battery can not start car engine.
RED or BROWN----------12V/24V car battery
BALCK------GND (Car Body)
YELLOW----Cut Relay Driving (Immobilizer Control)
GREY-------External SOS button
GREEN-------ON/ACC signal (if open the uploading will controlled by shock sensor)
5. Reset to default Configuration (Factory configuration)
Send SMS "RESET*123456" to the tracker, the tracker will repower on and reset all the
configuration to default.
Notes: After reset to default set, all IP / APN / GPRS / TIME ZONE setting are deleted and back
to default, all preset phone number are deleted and password change to 123456, all the alarm setting
is canceled, if you changed these before, then after reset the tracker, you need set these again by
sending SMS.
6. ANTENNA
� The Antenna of GSM and GPS are external , when install the antenna, please confirm the system
can work well.
� Pleas leave the tracker away from big metal, this will reduce the GSM and GPS signal, and the
GPS antenna need face to the heaven.
7. Shock Sensor and ON/ACC signal Control GPS ON/OFF and Power Saving
This tracker built in shock sensor, default is SHOCKCONTROL mode, when the tracker begin
to move, the tracker will turn on GPS and upload location automatically, when the tracker keep
stop moving 2 minutes, the tracker will turn off GPS & GPRS automatically (Stop uploading
location), this can make the battery life longer and save GPRS data charge.
Also the uploading tracking can be controlled by ON /ACC signal, when the ON / ACC signal
is high, the tracker will turn on GPS and upload location automatically, when the ON / ACC
signal is low, the tracker will turn off GPS & GPRS automatically (Stop uploading location), if this
signal wire is open and not connect to any signal , the uploading tracking is controlled by shock
sensor.
8. Using Condition
The working temperature is -20 0C to 60 0C, over this range the specification maybe can not reach
the standard level, the storage temperature can reach to -40 0C to 80 0C.
Fast Using Guide
1. First to buy a 2G GSM phone SIM card, which needs SMS service and incoming caller ID
display and GPRS function(GPRS is used for upload tracking to server, Caller ID display is used for
listen sound in car), and please disable the PIN code of the SIM card, this SIM card phone number is
the tracker number and all the operations (calling and sending SMS) to the tracker is this number.
2. After install the SIM card to tracker, connect to the car battery, the tracker will power on
automatically (When the battery power used out, recharging the backup battery maybe delay the first
locating 5-30 minutes).
3.Send SMS to tracker to set APN name and GPRS user name & password first (please call your
mobile phone company to confirm your SIM card APN and GPRS user name & password, some SIM
card are not necessary to set the GPRS user name or password).
4. Please confirm the tracker can receive the GPS signal and GSM signal (you should in the
outdoor to get GPS signal, Green LED will flash once or third every 4 seconds means GSM and GPS
signal well), when the tracker begin to move or the ON / ACC signal is enabled, the tracker will upload
the location to the platform: www.999gps.com .
5. Platform user name and password is the last 6 digital number of the tracker’s ID number, the
S/N number is print on the back of the device, this number is the ID number, also user can send SMS
“ID*password” (Tracker default password is 123456) to the tracker to check the ID number, user can
change the password and user information, our administrator can change the user name by user
request (ask your dealer to contact us), User login the website can see the current location on the
Google map, also user can display the history tracking in the specified date and time and other
operation.
For Example : S/N : CW9999C00019411
Then User name on platform is: 019411
Password is :019411
6. Also user use mobile phone visit website: www.999gps.mobi with the vehicle name and check
password (defined in the Terminal management), the last location information & location map will
display on your mobile phone.
7. User call the tracker or send SMS to tracker also can trigger the tracker to send back the
location in text description or google map website link by SMS (Send TEXTLOCATE*123456 or
LINKLOCATE*123456 to tracker).
8. If you have several trackers, fleet management user can be created by us, the user can see all
the trackers after login, this can be used as fleet management, ask your dealer to contact us to get
your fleet management user name and password.
9. The default data & time of the tracker upload to the website is GMT time (Greenwich Mean Time,
add or minus a fixed digit is your local time), you can send a SMS to the tracker to change the time to
your local time,(“TIMEZONE*123456*XYZ”, XYZ is from -13 to +13, for example: Newyork is -05, Paris
is +01,Tokyo is +09).
10. If you use your own server, please send SMS “IP*123456*youripaddressandport” to the
tracker to change the server IP and port.
SMS Instruction Description
Check Tracker ID Number :
The tracker ID is print on the label of the tracker, the S/N number on the label is the ID, Also if the
label is missing, send SMS “ID*123456” to tracker, in which, “ID” is the fixed command and
“123456”is the password. Having successfully been made, there will be a SMS “ID:
CW9999C12345678901”, in which, “CW9999C12345678901” is the ID and every tracker
corresponds to the only number. This number is used to differ the tracking uploaded to the website
from others. the last 6 digital number of the tracker ID is the user name and password of the tracker
on the platform, for example the tracker ID is : CW9999C12345678901, and then the user name on
the platform of this tracker is : 678901, and the platform password for this user name also
is :678901,user can login the platform to change the password.
Set the Time Zone of Local Time:
The data & time of the tracker upload to the website is GMT time (Greenwich Mean Time, add or
minus a fixed digit is your local time), you can send a SMS to the tracker to change your upload time
from GMT to your local time automatically, Send SMS “TIMEZONE*123456*XYZ” to the tracker, in
which, “TIMEZONE” is the fixed command, “123456” is the password and XYZ is the time zone of your
local time, it is from -12 to +13, for example: Newyork is -05, Paris is +01. Having successfully been
set , there will be a SMS “TIME ZONE XYZ”.
Notice: please confirm your local time zone, and if the time zone is not set, the tracker will upload
tracking with GMT time (Greenwich Mean Time).
Set Website Server IP :
Send SMS “IP*123456*113.106.89.149,9066” to the tracker, in which, “IP” is the fixed command,
“123456” is the password and “113.106.89.149,9066” is the IP address of the our server. Having
successfully been set , there will be a SMS “IP: 113.106.89.149,9066”. However, the IP address may
be changed with the upgrade of our service so please see to the notices on our website or to inquire
the agents.
Notice: The tracker default IP address is : “113.106.89.149,9066”, it is not necessary to set again,
unless our IP address has been changed or you change it to your own server, If the default IP is
changed, we will notice on the website.
Set APN name:
For some mobile phone SIM card, there must be to set the APN name to get through the internet
by GPRS. Send SMS “APN*123456*apnname” to the tracker, in which, “APN” is the fixed command,
“123456” is the password and “apnname” is the APN name of a mobile phone company. Having
successfully been made, there will be a SMS “APN: apnname”.
Notice: Some mobile company is not necessary to set APN or GPRS user name & password, please
contact your mobile company to confirm this, or get APN and GPRS user name & password from your
mobile phone company that the tracker used.
Set GPRS User Name & Password:
Send SMS “USERNAME*123456*username*password” to the tracker, “USERNAME” is a
command, “123456” is the password of the tracker; “username” is the mobile company GPRS user
name, “password” is the mobile company GPRS password, if the operation is success, the tracker
will send back the information “Username:username, Password:password”, please call the mobile
phone service hotline to get the GPRS username and password, some mobile company do not need
set the GPRS username and password. if the password is not right, the operation is fault, the tracker
will send back information “Wrong Password”
Note: before upload the tracking user need set IP, APN, GPRS user name & password (2G GSM
network APN, GPRS name &password, 3G network is not suit for this tracker), these only need set
once, and will be saved in the tracker. But if the tracker is back to default, then these setting need be
set again.
Add / Delete / Check preset number:
The preset phone number is used to send alarm information by SMS, or use mobile phone to locate
the tracker without platform, if the preset phone number is not set, then the alarm information can not
send to user by SMS (battery low, SOS, etc).
1. Add preset phone number by SMS
Send SMS“ADDPHONE*123456*A*number”(Not including the quotation marks “ ”, Number
means the telephone number you want preset, the following is same) to tracker is OK, “ADDPHONE”
is a command; “123456” is password; “A” is preset number location, every tracker have 3 preset
phone number locations, A and B, and C, so you can preset 3 phone numbers, if the add operation is
success, the tracker will send back the information ”Add Preset Phone OK”, if the password is not right,
the operation is fault, the tracker will send back information “Wrong Password”.
2. Delete preset phone number by SMS
Send SMS “DELETEPHONE*123456*A” to the tracker, “DELETEPHONE” is a command;
“123456” is password; “A” is preset phone number location, there are 3 locations “A” and “B” and “C”;
if the delete operation is success, the tracker will send back the information ”Delete Preset Phone OK”,
if the password is not right, the operation is fault, the tracker will send back information “Wrong
Password”.
3. Check preset phone number by SMS
Send SMS “CHECKPHONE*123456” to tracker, “CHECKPHONE” is a command; “123456” is
password; if the operation is success, the tracker will send back the information “Preset Phone A:
13322990998; B:13316868198;C:13322990033 , the phone number is just an example. if the
password is not right, the operation is fault, the tracker will send back information or “Wrong
Password”.
Change / Check Password
1. Change tracker password
Send SMS “CHANGEPASSWORD*123456*888888” to tracker, “CHANGEPASSWORD” is a
command; “123456” is old password; “888888” is new password; if the operation is success, the
tracker will send the information “ New Password: 888888” to every preset phone number, if the
password is not right, the operation is fault, the tracker will send back information “Wrong Password”.
Note: Only preset phone can change the password.
2. Check tracker password
Send SMS “CHECKPASSWORD” to the tracker, “CHECKPASSWORD” is a command, if the
operation is success, the tracker will send back the information “Password:888888”; “888888”is an
example.
Note: Only preset phone can check the password.
Locate Triggered by Calling :
Using preset phone call the tracker, after ring 3 times, the tracker will hang up the call automatically
and locate immediately, 10 seconds later, the tracker will send back the SMS location information
(map website link) of current location to the caller. user use mobile phone to click the website link to
visit internet, and the location on map will display on the mobile phone(the phone SIM card need
enable the GPRS function). If the tracker has not preset number, any phone call can trigger the
tracker to locate immediately, if the tracker has preset number, then only preset phone call can trigger
the tracker to locate immediately.
the SMS information sample is as follow:
http://www.google.com/map.aspx?lat=40.756441&lng=-73.986378&l=en
Battery:91%
After Click the above link to visit website, the map will display on your mobile phone.
Send a SMS to trigger tracker sending back map link by SMS
Send SMS “LINKLOCATE*123456” to the tracker, “LINKLOCATE” is a command, “123456” is
password; the tracker will locate immediately and send back the location information (map website
internet link) of current location to the caller. use mobile phone to click the website link to visit internet,
and the location will display on the map on your phone(the smart phone SIM card need enable the
GPRS function), if the password is not right, the operation is fault, the tracker will send back
information “Wrong Password.
Send a SMS to trigger tracker sending back text description location by SMS
Send SMS “TEXTLOCATE*123456” to the tracker, “TEXTLOCATE” is a command, “123456” is
password; the tracker will locate immediately and visit internet to get location in text description, and
then send back the location information in text description to the operator.
The SMS information sample is as follow:
Set Text Locate Reply Language
Send SMS “LANGUAGE*123456*XY” to the tracker, “LANGUAGE” is a command, “123456” is
password, “XY” is language symbol; the tracker will set the text locate reply language to the specify
language, then later every time text locate will reply the location in this language, If the password &
command is not right, the operation will fault.
The following is the symbol of the language:
Symbol Language Symbol Language
zh Chinese en English (Default)
zh-tw Taiwan / HK en-us English(US)
zh-sg Singapore en-gb English(UK)
fr French en-au English(Australia)
fr-be French(Belgium) en-ca English(Canada)
de German en-nz English(New Zealand)
ja Japanese en-ie English(Ireland)
es Spanish
pt Portuguese
The default language is English.
Send a SMS to trigger tracker sending back longitude & latitude location by SMS
Send SMS “SMSLOCATE*123456” to the tracker, “SMSLOCATE” is a command, “123456” is
password; the tracker will locate immediately and then send back the location information in
longitude & latitude to the operator, The sixth line is the tracker battery capacity, if the battery is lower
than 10%, tracker will send battery low information to preset phone number
The SMS information sample is as follow:
Latitude:22.680206N
Longitude:114.146998E
Speed(km/h):45.0
Direction(Degrees):303.30
GMT:2008/04/25 08:29:06.000
Battery:91%
The first & second line are the latitude of the tracker.
The third line is the speed of the tracker
The fourth line is the direction of the tracker(from the north it is 0, and the east is 90, and the
south is 180, and the west is 270, full circle is 360, it is clockwise).
The fifth line is the GMT time and date.
Over Area Alarm:
Send “SETAREA*123456*XY” SMS to the tracker, “SETAREA” is a command, “123456” is password,
“XY” is the radius of the circle area, unit is km, the center of the circle is the tracker current location
when receiving this command, if the current location can not be located, the operation fail. For
example XY is 03, it means the area is a circle with the radius is 3km, and the center of the circle is the
current location.
After set the over area alarm, the tracker will locate immediately, and set the current location as
the center of the circle, and later every 5 minutes the tracker will check the location is in the preset
circle area or not, if the tracker go out the area, then the tracker will send SMS to the phone who
enable the alarm.
The over area alarm SMS information is as follow:
OverArea
http://www.google.com/map.aspx?lat=40.756441&lng=-73.986378&l=en
User click the link can display the current location.
Also this function can be set by platform, but the platform over area alarm is different with this
command, the platform over area alarm only alarm on the platform, the platform will not send SMS to
user, and these 2 over area alarm settings are separated.
After send alarm information 3 times, the alarm setting will be canceled, and later the tracker will
not alarm again unless user set the alarm again.
Move Alarm:
Send SMS “SETMOVE*123456” to tracker, “SETMOVE” is a command, “123456” is password,
the tracker will send back the information “Set Move Alarm OK” or “Set Move Alarm Fail” to indicate
the operation is success or failed. if the current location can not be located, the operation fail.
After set the move alarm, the system will locate immediately, and set current location as the
center of the circle, the radius is 200 meters, circle a area, every 5 minutes the tracker will locate and
check the location is in the circle area or not, if the tracker go out the area, then the tracker will send
SMS to the phone who enable the alarm.
The move alarm SMS information is as follow:
Move Alarm
http://www.google.com/map.aspx?lat=40.756441&lng=-73.986378&l=en
User click the link can display the current location.
After send alarm information 3 times, the alarm setting will be canceled, and later the tracker will
not alarm again unless user set the alarm again.
Shock Alarm:
Send SMS “SHOCKALARM*123456” to tracker, “SHOCKALARM” is a command, “123456” is
password, the tracker will send back the information “Set Shock Alarm OK” or “Set Shock Alarm Fail”
to indicate the operation is success or failed.
After set the shock alarm, the system will detect the shock sensor that built in the tracker, if the
car is attacked by others, the shock sensor will be triggered, and the tracker will send SMS to the
phone who enable the alarm.
The shock alarm SMS information is as follow:
Shock Alarm
http://www.google.com/map.aspx?lat=40.756441&lng=-73.986378&l=en
User click the link can display the current location.
After send alarm information 3 times, the alarm setting will be canceled, and later the tracker will
not alarm again unless user set the alarm again.
Over Speed Alarm:
Send SMS “SETSPEED*123456*XYZ” to tracker, “SETSPEED” is a command, “123456” is
password, “XYZ” is the preset report speed, the speed must be 3 digits , from 000 to 999, unit is
Km/hour, the tracker will send back the information “Set Speed OK” or “Set Speed Fail” to indicate
the operation is success or failed.
After set the over speed alarm, the system will locate every 5 minutes and check the speed of the
tracker is higher than the preset speed or not, if the speed is higher than the preset speed, the
tracker will send SMS to the phone who enable the alarm.
The over speed alarm SMS information is as follow:
OverSpeed
http://www.google.com/map.aspx?lat=40.756441&lng=-73.986378&l=en
User click the link can display the current location.
Also this function can be set by platform, but the platform over speed alarm is different with this
command, the platform over speed alarm only alarm on the platform, the platform will not send SMS to
user, and these 2 over speed alarm settings are separated.
After send alarm information 3 times, the alarm setting will be canceled, and later the tracker will
not alarm again unless user set the alarm again.
GPS Signal Alarm:
Send SMS “GPSALARM*123456” to tracker, “GPSALARM” is a command, “123456” is password,
the tracker will send back the information “Set GPS Signal Alarm OK” or “Set GPS Signal Alarm Fail”
to indicate the operation is success or failed.
After set the GPS signal alarm, when the GPS module is working, if the GPS signal is weak, the
GPS module can not locate properly, the tracker will send alarm SMS to the phone who enable the
alarm.
The GPS Signal alarm SMS information is as follow:
No GPS Signal Alarm.
The GPS antenna need face to heaven, in the car some place the GPS signal maybe not very
good, this will make GPS can locate some time, change another place can solve this problem, the
bad connection or human damaged the GPS antenna will trigger the GPS signal alarm.
Listening Monitor sound around tracker
Send SMS “MONITOR*123456*phonenumber” to tracker to listen sound around the tracker,
“MONITOR” is a command, “123456” is password, “phonenumber” is the phone number used to
monitor the tracker, the tracker will call back, pick up the calling and listen the sound.
Also logon the platform, click the “Listen in” menu in the left bottom windows can do the same
operation, please see the operation menu of the platform.
Cancel All Alarm Setting
Send SMS “CANCELALARM*123456” to tracker can cancel all the alarm setting, the
“STOPENGINE” command can be canceled by this SMS, “CANCELALARM” is a command,
“123456” is password, the tracker will send back information “All Alarm Cancel”, and cancel all the
shock alarm setting in the tracker. if the password is not right, the operation is fault, the tracker will
send back information “Wrong Password”.
Set Send Alarm Email Address
Send SMS “EMAILSENDADDR*123456*sendemailaddress” to tracker to set the send alarm
information email address, the “EMAILSENDADDR” is a command, “123456” is password,
“sendemailaddress” is the send alarm email address, for example the send alarm email address is :
[email protected], then this SMS command should be:
“EMAILSENDADDR*123456*[email protected]”. If the password & command is not right, the
operation will fault.
This tracker can send alarm information by sending email, and the tracker need a email address
to send the email, also need a email address to receive the alarm information, the 2 email address
can be the same, also can be different. Email sending need good GMS network, when the tracker is
moving or the GSM signal is not good will make the email sending fail.
PleasePleasePleasePlease checkcheckcheckcheck thethethethe emailemailemailemail suppliersuppliersuppliersupplier totototo confirmconfirmconfirmconfirm thethethethe emailemailemailemail addressaddressaddressaddress cancancancan bebebebe usedusedusedused withwithwithwith smtpsmtpsmtpsmtp modemodemodemode
totototo sendsendsendsend email,email,email,email, andandandand thethethethe smtpsmtpsmtpsmtp serverserverserverserver shouldshouldshouldshould useuseuseuse portportportport 25.25.25.25. ButButButBut ifififif thethethethe smtpsmtpsmtpsmtp serverserverserverserver needneedneedneed securitysecuritysecuritysecurity
connectingconnectingconnectingconnecting (SSL)(U),(SSL)(U),(SSL)(U),(SSL)(U), thenthenthenthen thisthisthisthis emailemailemailemail addressaddressaddressaddress cancancancan bebebebe usedusedusedused forforforfor emailemailemailemail sendingsendingsendingsending (For(For(For(For exampleexampleexampleexample
GmailGmailGmailGmail needneedneedneed enableenableenableenable (SSL)(U),(SSL)(U),(SSL)(U),(SSL)(U), sosososo itititit cancancancan notnotnotnot bebebebe usedusedusedused totototo sendsendsendsend email,email,email,email, butbutbutbut cancancancan bebebebe usedusedusedused totototo receivereceivereceivereceive
email).email).email).email).
Set Send Alarm Email Sending Server
Send SMS “SMTPSERVERNAME*123456*servername” to tracker to set the email sending SMTP
server, the “SMTPSERVERNAME” is a command, “123456” is password, “servername” is the
SMTP server name, the tracker will send back information “Smtp server name: servername”, for
example microsoft live.com email smtp server name is : smtp.live.com, then this SMS command
should be: “SMTPSERVERNAME*123456*smtp.live.com”, if the password & command is not right,
the operation will fault.
Set Send Alarm Email Address Name
Send SMS “EMAILNAME*123456*emailname” to tracker to set the email sending address email
name, the “EMAILNAME” is a command, “123456” is password, “emailname” is the sending email
address email name, for example the sending email address is : [email protected], then this
SMS command should be: “EMAILNAME*123456*[email protected]”. If the password &
command is not right, the operation will fault.
Set Send Alarm Email Password
Send SMS “EMAILPASSWORD*123456*emailpassword” to tracker to set the email sending
address email name, the “EMAILNAME” is a command, “123456” is password, “emailpassword” is
the sending email address password, for example the sending email address [email protected]
password is :A123456, then this SMS command should be: “EMAILPASSWORD*123456*A123456”.
If the password & command is not right, the operation will fault.
Set Receive Alarm Email Address
Send SMS “EMAILRECEIVEADDR*123456*receiveemailaddress” to tracker to set the receive
alarm information email address, the “EMAILRECEIVEADDR” is a command, “123456” is password,
“receiveemailaddress” is the receive alarm email address, for example the receive alarm email
address is : [email protected], then this SMS command should be:
“EMAILRECEIVEADDR*123456*[email protected]”. If the password & command is not right,
the operation will fault.
The sending email address and receiving email address can be the same one, it means you can
send email to yourself by the same email address. Also you can specify another email address to
receive the alarm email.
Enable SMS alarm
Send SMS “SMSALARMON*123456” to tracker will make the above alarm setting send SMS to
user, otherwise the alarm only send email to user email address, “SMSALARMON” is a command,
“123456” is password, the tracker will send back information “SMS Alarm ON”, if the password is not
right, the operation is fault, the tracker will send back information “Wrong Password”.
Disable SMS alarm
Send SMS “SMSALARMOFF*123456” to tracker will make the above alarm only send email to
user email address, and will not send SMS to user, “SMSALARMOFF” is a command, “123456” is
password, the tracker will send back information “SMS Alarm OFF”, if the password is not right, the
operation is fault, the tracker will send back information “Wrong Password”.
Keep Tracker Online All the Time
Send SMS “KEEPONLINE*123456” to tracker can make the tracker keep online all the time,
“KEEPONLINE” is a command, “123456” is password, the tracker will not go to standby mode after
the tracker stop moving, it means the tracker will turn on the GPS module all the time, then user can
control the tracker all the time, this mode will cost some GPRS data and power battery, this mode
can be canceled and got to default shock sensor control mode (If the tracker stop moving 2 minutes,
it will turn off GPS and go to standby mode to save GPRS data charge & car battery) by the SMS
command “CANCELALARM”. If the shock sensor sensitivity is not high enough or the car is stolen,
enable this mode can make the car can be controlled all the time.
Cut Oil Power (Remote Turn Off Car Engine)
Send SMS “STOPENGINE*123456” to tracker, “STOPENGINE” is a command, “123456” is
password, the car engine will be turned off immediately. The tracker will send back information “Car
Engine turn off”, if the password is not right, the operation is fault, the tracker will send back
information “Wrong Password”.
Also logon the platform, click the “Cut oil power” menu in the left bottom windows can do the
same operation, please see the operation menu of the platform.
Attention: Turning off engine is very dangerous when car is driving, this will make
the car difficult to control and maybe cause a accident, so we recommend make the
relay cut the start motor wire, this will make you can not remote turn off car engine, but
you can make the car engine can not be started.
The output current of the tracker is small than 500mA, so a relay is necessary to install to turn off the
car engine, and also a diode is necessary to add to protect the tracker driving wire, the diagram is as
follow:
Low Battery Alarm:
When the tracker battery voltage is low, the GREEN LED of the tracker will flash 3 or 4 times,
and then the tracker will automatically send battery low information to the first preset phone number.
the battery life can last about 1-2 days according the different using condition (CCTR-800 standby
time is 5-7 days, uploading time is 24 hours, and CCTR-800/801 standby time is 2 days, uploading
time is 8 hours, but if the GPS and GSM signal is not good will reduce the time.)
Back to Default Configuration (Factory Configuration):
Send SMS “RESET*123456” to tracker, “RESET” is a command, “123456” is password, the car
engine will be turned off and turn on immediately, Also the tracker will reset all configuration to factory
default, all IP / APN / GPRS / TIME ZONE setting are deleted and back to default, all preset phone
number are deleted and password change to 123456, all the alarm setting is canceled, if you changed
these before, then after reset the tracker, you need set these again by sending SMS.
“SOS” Emergency
Press the “SOS” button 6 seconds, first the LED will flash fast, then the LED will turn OFF, release
the button, the tracker will send SOS help information to all 3 preset phone.
HELP ! ! !
Battery:91%
If the tracker receive the HELP information, please note that the SOS button must be pressed,
please call the driver to confirm with the user is safe or not or call the police.
The SOS function need installing the external SOS button (for CCTR-800 has not external SOS
button, user can press the SOS button beside the box), install the external SOS button in a hidden
place that driver can press the button, connect one wire of the SOS button to GND (car body), another
wire of the SOS button to tracker SOS wire.
Instruction List
Function SMS Instruction Note Reply Note
Set APN nameAPN*123456*apnname
Any mobilephone can set
APN:apnnameReply to operationphone
Set GPRS user name& password
USERNAME*123456*username*password
Any mobilephone can set
Username:username,Password:password
Reply to operationphone
Set Time ZoneTIMEZONE*123456*XYZ
Any mobilephone can set
Time Zone is XYZReply to operationphone
Check tracker IDNumber
ID*123456Any mobilephone can set
ID:CW9999C12345678901
Reply to operationphone
Add phone numberADDPHONE*123456*A*13322990033
Any mobilephone can set
Add Preset PhoneOK
Reply to theoperation phone
Delete phone numberDELETEPHONE*123456*A
Any mobilephone candelete
Delete Preset PhoneOK
Reply to theoperation phone
Check preset phonenumber
CHECKPHONE*123456
Any mobilephone can check
A:13912345678;B:13812345678;C:13712345678;
Reply to theoperation phone
Change passwordCHANGEPASSWORD*123456*888888
Only presetphone can
New Password:888888
Reply to operationpreset phone
change
Check passwordCHECKPASSWORD
Only presetphone can check
Password: 888888Reply to operationpreset phone
Send SMS triggermap link reportlocation
LINKLOCATE*123456
Any mobilephone can set
Current location mapwebsite link
Reply to operationphone
Send SMS triggerLatitude & Longitudereport location
SMSLOCATE*123456
Any mobilephone can set
Current locationLatitude & Longitudeinformation
Reply to operationphone
Send SMS triggerText Descriptionreport location
TEXTLOCATE*123456
Any mobilephone can set
Current location in textdescription
Reply to operationphone
Set SMS language inTEXTLOCATEoperation
LANGUAGE*123456*XY
Any mobilephone can set
Set Text Description inLanguage XY
Reply to operationphone
Set Break Geo-fenceAlarm
SETAREA*123456*XY
Any mobilephone can set
Set area alarm OKReply to operationphone
Set Move Alarm SETMOVE*123456Any mobilephone can set
Set move alarm OKReply to operationphone
Set Over SpeedAlarm
SETSPEED*123456*XYZ
Any mobilephone can set
Set Speed alarm OKReply to operationphone
Set Shock AlarmSHOCKALARM*123456
Any mobilephone can set
Set Shock alarm OKReply to operationphone
Set GPS Signal AlarmGPSALARM*123456
Any mobilephone can set
Set GPS Signal alarmOK
Reply to operationphone
Enable SendingAlarm by SMS
SMSALARMON*123456
Any mobilephone can set
Enable Sending Alarmby SMS
Reply to operationphone
Disable SendingAlarm by SMS
SMSALARMOFF*123456
Any mobilephone can set
Disable SendingAlarm by SMS
Reply to operationphone
Set Sending alarmEmail Address
EMAILSENDADDR*123456*sendingemailaddress
Any mobilephone can set
Sending Emailaddress:sendingemailaddress
Reply to operationphone
Set Sending alarmEmail SMTP ServerName
SMTPSERVERNAME*123456*smtpservername
Any mobilephone can set
Sending Email smtpserver name::smtpservername
Reply to operationphone
Set Sending alarmEmail Name
EMAILNAME*123456*emailname
Any mobilephone can set
Sending Emailname: emailname
Reply to operationphone
Set Sending alarmEmail Password
EMAILPASSWORD*123456*emailpassword
Any mobilephone can set
Sending EmailPassword:emailpassword
Reply to operationphone
Set Receiving alarmEmail Address
EMAILRECEIVEADDR*123456*receiveemailaddress
Any mobilephone can set
Receiving Emailaddress:receivingemailaddress
Reply to operationphone
Listen & Monitorsound
MONITOR*123456*phonenumber
Any mobilephone can set
Call back and pick upthe calling can listen
Call back tooperation phone
Remote turn off carengine
STOPENGINE*123456
Only presetphone can set
Car Engine Turn OffReply to operationphone
Keep Tracker OnlineContinuously
CANCELALARM*123456
Any mobilephone can set
All Alarm CancelReply to operationphone
Set IP addressIP*123456*113.106.89.149,9066
Any mobilephone can set
IP:113.106.89.149,9066
Reply to operationphone
Cancel All AlarmSetting
CANCELALARM*123456
Any mobilephone can set
All Alarm CancelReply to operationphone
Auto Re-power on &Reset tracker
RESET*123456Any mobilephone can set
Tracker Re-power onand cancel all alarmsetting
Reply to operationphone
SOS EmergencyPress SOS buttonuntil the GREENLED turn off
HELP + locationinformation
Send SOS HELPinformation to allpreset phone
1.The tracker default password is 123456, you can change the password.
2.All the SMS information is in English word, “*” is the star key, “” is not including in the SMS information, it
is just used to indicate the information.
Notes & Trouble Shooting
1. This tracker use 2G GSM network, and it upload tracking only through 2G GPRS, it can not
work in CDMA network or 3G(WCDMA or CDMA2000) network. Please confirm that the SIM
card PIN code has been disabled. If the tracker can not find GSM network, the Green LED
will keep ON
2. The antenna of GSM and GPS is external, please note that the install location of the antenna
need receive the GPS signal, normally the back of the seat or in the door post or in the roof
post or under the back window or under the panel etc. please leave away the tracker from big
metal, make the top of the GPS antenna face to heaven, and keep away from the magnetic
components.
3. The tracker built in rechargeable backup Li battery, recharge one time can use about 1-2
days (standby mode), normally the tracker connect to the car battery all the time, this can
keep the tracker has power supply continuously, and the charging circuit will stop after the
battery is full.
4. The GPS need 10-200 seconds to locate the position, when the GSM signal is weak or the
network is very busy, the SMS maybe delay to send by the GSM network, this is normal.
5. The tracking data on our server will keep 6 months, the old data will be deleted.
6. The tracker auto power off: please confirm the tracker battery have enough power, and try to
recharge it; and confirm the adapter is working well .
7. After power on the tracker, the tracker GREEN LED keep on, and it has not any repose, and
no ring, please confirm the SIM card has been installed properly, the SIM card PIN code is
disable, and the SIM card has enough charge, and the mobile phone can work well in that
place. If the tracker work well the Green LED will flash once or third times every 4 seconds
(First power on, recharging the battery will delay the first locating 5-30 minutes).
8. If the tracker can not upload location to website, please confirm the SIM card has GPRS
function, and has set the APN or GPRS username & password (call the mobile phone hotline
to confirm the APN and GPRS username & password, and send SMS to tracker to set these).
if the tracker do not move, the tracker will not upload tracking, try moving the tracker in the
open air (Indoor room can not receive GPS signal) .
9. If the tracker can not send back information by SMS, please confirm the SIM card has
enough money, and has ID caller display function and SMS service function, and please read
the SMS information of the tracker sending back, and check the instruction & password is
right or not.
10. When call the tracker, it has ringing, but it will not hang up the calling, please check the
tracker has set the preset phone number, use the preset phone or delete the preset phone
number or let the tracker back to default is OK.
11. After go out the under ground park, some tracking will lost, the GSM and GPS module will
take a few minutes to receive signal and re-locate, some tracking maybe lost, this is normal.
12. Some time some location point is lost, this is normal, in the transmit process, some points
maybe are lost, but this will not happen very often.
Specification:
GSM Module U-Blox GPS Module U-Blox
GSM Frequency 4 band (850/900/1800/1900MHz) A-GPS Available
GPS channel 32 channels Locate precision 10-20 Meters
GPS Cold Start Time 30 seconds GPS Hot Start Time 1-2 second
GSM Antenna External GPS Antenna External
Battery (CCTR-811) 400mAh Uploading Current <200mA / 5V
Standby Current < 10 mA Working Temperature -20 0C to +55 0C
Absolute Temperature -35 0C to +70 0C Storage Temperature -40 0C to +80 0C
Warranty
This system has been tested before sold. We strongly recommend you to get this system installed by
professional. There is a one-year warranty except the following condition:
1. Installed, fixed, or changed by personally or unprofessional.
2. Warranty will eliminate if the ownership of the tracker has been changed.
3. Parts damaged by man-made.
4. Battery, antenna, wires, etc.
Warning: this device is just a auxiliary product that applying the location of current object, it can not replace the
car assurance, we have not any responsibility if you have damage or lost in using this tracker.
User Name Telephone: Tracker Telephone:
Purchase Date Year Month date Tracker S/N or ID:
Address:
Model: CCTR-811 □
Distributor:
Notes: The explanation of this manual is belonged to our company, some small changes may not notice
customer, if you have any problems please contact us, thanks!