cell 110621 revere p2030 manual en rev.00 reduced
TRANSCRIPT
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
1/105
Pantech P2030
PantechP2030
PANTECHP2030UserGu
ide
5U000473C0A
REV.005U000473C0AREV.00
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
2/105
Some of the contents in this manual may differ from your phone depending on the software of the phone.
Actual color may vary.
Your phone is designed to make it easy for you to access a wide variety of content. For your protection,
we want you to be aware that some applications that you enable may involve the location of your phone
being shared. For applications available through AT&T, we offer privacy controls that let you decide
how an application may use the location of your phone and other phones on your account. However,
the AT&T privacy tools do not apply to applications available outside of AT&T. Please review the terms
and conditions and the associated privacy policy for each location-based service to learn how locationinformation will be used and protected. In addition, your AT&T phone may be used to access the internet
and to download, and/or purchase goods, applications, and services from AT&T or elsewhere from third
parties. AT&T provides tools for you to control access to the Internet and certain Internet content. These
controls may not be available for certain devices which bypass AT&T controls.
Service provided by AT&T Mobility. Por tions 2011 AT&T Intellectua l Property. All rights reserved. AT&T, the
AT&T logo a nd all othe r AT&T marks contained h erein are trade marks of AT&T Intellectual Property and/or
AT&T afliated companies. All other marks contained herein are the property of their respective owners.
tenidoenestemanualpuedevariareneltelfonodependiendodelsoftwaredeltelfono.El
edevariar.
stdiseadoparateneraccesoaunagranvariedaddecontenido.Portuseguridad,
ueestsconscientedequealgunasaplicacionesquethabilitaspuedenocasionarquela
tutelfonosecomparta.ParalasaplicacionesqueseofrecenatravsdeAT&T,ofrecemosprivacidadquetepermitendecidircmounaaplicacinpuedeusarlaubicacindetu
rostelfonosentucuenta.Sinembargo,lasherramientasdeprivacidaddeAT&Tnose
cacionesdisponiblesfueradeAT&T.Revisalostrminosycondicionesylanormade
lacionadaparacadaserviciobasadoenlaubicacinparaaprendercmoseutilizayprotege
ndelaubicacin.Adicionalmente,tutelfonoAT&Tpuedeutilizarseparateneraccesoa
scargar,y/ocomprarbienes,aplicacionesyserviciosdeAT&Toterceros.AT&Tteofrece
sparaquecontroleselaccesoaInternetyaciertocontenidodeInternet.Talescontroles
stardisponiblesparaciertosequiposqueesquivanloscontrolesdeAT&T.
cidoporAT&TMobility.Ciertasporciones2011AT&TIntellectualProperty.Todoslos
servados.AT&T,ellogotipodeAT&TytodaslasotrasmarcasdeAT&Tcontenidasaquson
ercialesdeAT&TIntellectualPropertyy/ocompaasaliadasaAT&T.Todaslasotrasmarcas
qusonpropiedaddesusrespectivosdueos.
statement>
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
3/105
User GuideThank you for choosing the Pantech P2030.
The Pantech P2030 has many featuresdesigned to enhance your mobile experienceFrom its EZ to read menus, to its sleek, stylishdesign, we know you will enjoy the entire P203experience.
This User Guide contains important and usef
information that will maximize your familiaritywith all that the Pantech P2030 has to offer.
P2030
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
4/105
2
Specifications
DesignClamshell phone with internaland external display
Displays 260K Colors TFT LCD with 2.2
internal display
65K Colors CSTN LCD with 1.38external display
7 lines for text in basic modewith 16 point font
Two soft keys and four-wayscroll and pressing@
MelodiesMIDI, i-Melody, MP3, AMR, WAV,AAC, AAC+, WMA
CameraIntegrated 1.3M CMOS Camera Resolution up to 1280 x 1024
(1.3M pixels)
3GP Video recording/playing up
to 15f/s (QVGA size) Self-timer function (5 seconds
or 10 seconds)
Photo album and video album
Dimensions & WeightWeight: 102 g (with standardbattery)Dimensions: 99 mm x 51.2 mm x18.8 mm
Power Management(Performance)
Battery
Type Capacity
Standby
Time
Talk
TimeStandard
Lithium-
Ion
(Li-ion)
Up to
920mAh
Up to
250
hours
Up to
3 hours
Operating Frequency GSM 850Mhz, GSM 900Mh
DCS 1800Mhz, and PCS1900Mhz networks in NorthAmerica, South America,Europe, Africa, and Asia-Pawhere these networks aresupported
Automatic band switching
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
5/105
Cont
4
Specications ...................................2Phone overview ................................8Using Shortcuts ..............................10Menu overview .................................11Quick & Easy .................................... 14SIM card and battery ..................... 17Turning the phone on/off ............ 20Essential display indications ...... 20Setting the phone mode ..............23Entering text ...................................24
EZ quick call keys ........................... 26PC Suite .............................................27Memory card ...................................28Memo .................................................32
Breeze Mode
1. Calls and address bookMaking, receiving and endinga call .....................................................34Options during a call .....................36Checking all calls ............................39Speed dialing ...................................42Using address book ......................43Using your headset .......................45
Service and fixed dialing number ...46
2. MessagingReceiving messages.....................48Creating and sending textmessages ..........................................49Creating multimedia messages .....49Managing messaging memory ...55Email ....................................................56
3. MultimediaCamera ...............................................58Photo album .....................................64Video album .....................................66
4. Useful FeaturesCalendar.............................................70Alarm clock ........................................71Pill Reminder..................................... 72User Guide ........................................73
Calculator ..........................................74Tip calculator ................................... 74Stop watch ........................................75Say a Command ............................. 75Readout Mode ................................. 77
5. ConnectivityBluetooth ...........................................80Using Mobile Web ..........................82
6. SettingsPhone status ..............................Sounds & alerts .........................Display settings.........................Voice command setting .......
Advanced Mode
1. Calls and address bookMaking, receiving and endinga call ...............................................Call settings ................................Checking all calls ......................Speed dialing .............................Using address book ................Using your headset .................Service and xed dialingnumber .........................................Caller identication .................
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
6/105
Cont
6
2. MessagingReceiving messages...................104Creating and sending textmessages ........................................106Creating multimediamessages ........................................107Message templates.......................112Message settings ..........................113Managing messaging memory .. 115Email ....................................................117
Using instant messenger............117
3. MultimediaCamera .............................................120Photo album ................................... 126Video album ................................... 128Audio album ...................................130Music player .....................................132
Music player settings ...................137Media player ................................... 138Other les ........................................140Managing memory ......................140Playing games ................................ 141AppCenter .......................................141
4. Useful FeaturesCalendar...........................................144Alarm clock .....................................145
Pill Reminder...................................146User Guide ...................................... 147Calculator ........................................148Tip calculator .................................148Stop watch ......................................149Notepad and voice memo .......149World time ........................................151Converter .........................................151
Timer ..................................................152Say a Command ............................152Readout Mode ...............................154
5. ConnectivityBluetooth .........................................156Using Mobile Web ........................ 159Using the web browser ..............159Setting proles ............................... 161
6. SettingsLanguage.........................................164Time and date ................................164Voice command setting ...........164Sounds and alerts ........................ 165Display settings.............................165Security ............................................ 167Updating software .......................168Reset ..................................................169
TTY .................................................
7. AppendixAlert message ...........................Troubleshooting checklist ...Safety information ...................Safety precautions ..................About the battery usage .......FCC Hearing-Aid Compatib(HAC) regulations for wireles
devices..........................................FCC Regulatory ComplianceWarranty .......................................Speaker Phone & Noise CancelDynamic Noise Suppressionfrom Audience ..........................earSmart technology ..........
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
7/105
Earpiece
Internal display
Left/Right Soft keyPerform the functions shown at thebottom line of the display
OK key or access Mobile WebPress to enter menu system
Camera key
Power on & off / Menu exit / End keyTurns phone on / off, ends calls, exitmenus
Clear key and CalendarReturns to previous screen or deletescharacters in text mode. AccessCalendar menu
EZ Quick Call Keys
Navigation key
Scroll through themenu options
Voice Command
Send keyVoicemail
Vibrate mode
Microphone 1
External Display Camera
LED IndicatorsMessage, Call,
Battery
Internal antennaarea
Microphone 2
Speaker
Micr(EarCha
note: Holding the device by the internal antenna area might affect the quality of a
8
Phone overview Volume up /down
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
8/105
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
9/105
12
Advanced mode menu
Address
BookContacts
Groups
Favorites
Settings
Fixed DialNumbers
My PhoneNumber
SServiceNumbers
RKDDADFGAFGA
ADFDFHDGJKLK;KJHGFD SFSDSFG
FHJGHKJFHSSERYTUTY JFGHKKDFY
RSYGHJDGHJFGHJDGJDGHDFGJH G
SDFHGJFGJHDGFSDFH
MessagingConversations
CreateMessage
Mobile Email
IM
Outbox
Drafts
Voice Mail
Settings
Templates
Used Space
IM Mobile
Email
Mobile
Web
AppCenter AT&T GPSAT&T
Navigator
Shop GPS
AT&T
FamilyMapWhere
AllSport GPS
YPmobile My StuffApplications
Audio
Games
PictureVideo
Tools
Other Files
Used Space
AT&T MusicMusic Player
Shop Music
AT&T Radio
Shazam
my AT&T SettingsPhone Mode
Proles
Display
N
CallPhone
NetworkConnections
Connectivity
SSecurity
NAT&TSoftwaUpdate
Reset
TTY
PhoneInforma
SSIM dependent NNetwork dependent
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
10/105
14
Quick & EasyKeys Functions
Perform the functions shown at the bottom line of the displayby using these soft keys.
Scroll through the menu options in Menu mode. In standbymode,
Left Scroll: Access Mobile Email menuRight Scroll: Access IM menuUp Scroll: Access Create Message menuDown Scroll: Access Address Book menu
@Select a menu function or store user-input information, suchas names. Also use this key for conrmation.
Launch the Mobile Web directly if pressed in standby mode.
Delete characters in text mode, or return to previous menu.
Open Calendar view if pressed quickly in standby mode.
Keys Functions
SMake or receive a call. Show the recent call list in standby m
Re-dial the last call number if pressed and held in standbymode.
EComplete the current call. Turn on/off the phone if presseand held. Cancel user input and return to standby mode win Menu mode.
1Quickly connect to the voice mail server if pressed anheld in standby mode.
0~9Enters numbers, letters or special characters. Go to the discreen if pressed in standby mode.
Assigns the number as a speed dial when it is pressed andheld.
*Enter or exit from vibrate mode if pressed and held in stanmode. Show the symbol input screen if pressed in text inpmode.
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
11/105
16
Keys Functions
0Enter the + sign prex for international dialing if pressed andheld.Enter the space character in text input mode.
Change various text input modes if pressed at the text-editingscreen.
/
Adjust the earpiece volume while making a call.Control the Ringtone volume, vibrate mode and silent all modein standby.
Mute the ringtone of an incoming call.Reject the incoming call if pressed and held when you receivean incoming call.
QTurn camera capture mode on.
Work as a camera shutter in capture mode.
N Turn the Voice Commands on.
SIM card and battery
About your SIM cardWhen you subscribe to yournetwork operator, you receive aSIM (Subscriber Identity Module)card containing your registrationinformation, PIN code, etc.Like a credit card, it should
be kept secure and handledcarefully. Do not bend, scratchor expose it to moisture. Avoidstatic electricity.To avoid corrupting your SIMcards memory, always switch offyour phone before removing orinserting your SIM card.
About your batteryYour phone uses a Li-Ion batMake sure to use an authorizbattery and charger only. Fomore details, please inquire ayour nearest dealer.note:Your phone is powered by a
Lithium Ion (Li-Ion) battery. This m
that, unlike other forms of battery
technology, you can recharge youbattery while some charge remain
without reducing your phones
autonomy due to the battery mem
effect inherent in those technolog
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
12/105
G tti t
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
13/105
Getting sta
20
2. To removethe adapterconnecting, pullthe adapteraway as shownright.
Turning the phone on/offTo turn on
1. Press and holdE.To turn off
1. Press and holdE.
Essential displayindications
Signal strength. The greater the
number of bars, the stronger
the signal. When network is in
searching mode is displayed.
Flight mode is active.
A call is being made. When
you are in no service area, isdisplayed.
Call forwardingNS is active.
Incoming calls set to ring only
(Normal).
Incoming calls set to Vibrate
and Ring.
Incoming calls set to Vibrate
Only.
Incoming calls set to Silent.
Received one or more text
messages.
Received one or more
multimedia messages.
Received one or more WAP push
messages.Received one or more other
messages.
Received one or more voice
messages.
Inbox is full.
A message is being sent.
A message is being receive
An alarm is set.
Bluetooth is active.
Bluetooth hands-free head
connected.
Bluetooth A2DP headset is
connected.
Bluetooth hands-free + A2D
headset is connected.
Data transfer via Bluetooth.
Headset is connected.
USB is connected.
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
14/105
Getting sta
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
15/105
Getting sta
24
Assigning the menuYou can set the most commonlyused menu in Shortcuts instandby mode.
1. Select Shortcuts in standbymode > Unassigned.
2. Select Add.3. Select the menu and sub
menu.
4. Select Save.
Entering textYou can enter text with multi-tap,predictive, numeric or symbol.
Useful keys* Display symbols.
0 Adding a space.
Press to toggle from initial caps
to all caps, to lower case, or to
numeric entries.
Press to change the text entry
functions from ABC mode to
predictive mode, or number
mode.
ABC Modedbc(lower
case / initial caps / all caps)
Predictive Modegef
(lower case / initial caps / all
caps)
Number Modea
Key characters by languageEach of the following keys willscroll through these sequentialoptions listed by language.
Key English French Spanish
1 . , - ? ! / ' @ :
2 abc
3 def
4 ghi
5 jkl
6 mno
7 pqrs
8 tuv
9 wxyz
ABC modePress the key labeled with thtarget letter once for the rsletter; press it twice for thesecond letter, and so on.
1. Press to change themode as multi-tap.
2. Press2 to9 to input repeatedly. To write the le
C, press23 times. To number 2, press24 tim
Predictive mode (T9)The predictive modeautomatically compares youkeystrokes with an internallinguistic dictionary to deter
Getting sta
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
16/105
Getting sta
26
the correct word. It will displaythe most commonly usedrst. To save a word not listedin phones dictionary, selectOptions > Predictive Settings >My Words.
1. Press to change themode to predictive.
2. Press2 to9 to input text.
For example, to write hello,press43556.
Number modeYou can input numbers in thismode.
1. Press to change themode to 123.
2. Press1 to9and0 toinput numbers.
Symbol modeYou can input symbols.
1. Press* to view the symbols.2. PressU/D/L/Rto select a
symbol and select Insert.
EZ quick call keysGetting in touch with those youcall most is now as EZ as 1-2-3.note:The following direction is an
example with usingxkey. The usage
ofyandzkeys will be same as the
following.
To assign a contact to QuickCall
1. Pressx.
2. Select Quick Call > Assign.3. Select a contact > Select.
To make a call using onetouch key
1. Pressx.
2. Select Call.To send a message usingone touch key
1. Pressx.
2. Select Options > SendMessage.
PC SuitePC suite is a Windows-basePC program that allows youto easily manage personaldata and multimedia les bconnecting your Phone to aThe PC suite application cadownloaded athttp://www.pantechusa.com
System requirements Microsoft Windows 2000 o
family and Vista 32 bit
At least 300MB of free diskspace
Getting sta
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
17/105
Getting sta
28
Interface devices such as USBor Bluetooth for the connectionwith the phone
PC Suite features Contact Manager
PC Sync Message Manager
File Manager MMS PC Composer Internet Access
Memory cardYou can use a microSD card as amemory card. It gives you morespace to save pictures, videos,music, etc.
Inserting a memory card1. Remove the
battery coverand the batteryfrom the unit.
2. Unlock themicroSD cardslot by carefullysliding it up. The
metal covershould now beeasily lifted up.
3. Insert the microSD card into theslot. The goldcontacts of themicroSD cardshould goagainst themetal contacts of the phone.
4. Close the metal
cover and slidedown to lock themicroSD card inplace. Theicon will bedisplayed whenthe phone is turned on.
Using a memory cardYou can save, move and delethe les in your phone andexternal memory card. You calso move and copy the lescomputer from your phone.
To copy a le to the memcard
1. Select a le > Options > C
to External Memory.2. To copy the le back to th
phone, select Options > Cto Phone.
Getting sta
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
18/105
Gett g sta
30
To move a le to the memorycard
1. Select a le > Options > Moveto External Memory.
2. To move the le back to thephone, select Options > Moveto Phone.
To delete a le from thememory card
1. Select a le from the card >Options > Delete.
In Advanced Mode, you haveaccess to all of the features ofP2030 including the featuresprovided by Breeze Mode.
To move the le from thecard to the computer
1. Connect the data cable withmobile and the computer.
2. Select Menu > Settings >Connectivity.
3. Select Select USB Mode.4. Select Music Player,
Mass Storage or Ask on
Connection.5. Follow the instructions on your
computer screen.
note:Select Music Player when you
want to add music to the playlist in
your device. When you select Ask on
Connection, it will ask you to select
either the Music Player or Mass Storage
every time you connect your device with
your computer.
Resetting a memory card1. Select Menu > Settings >
Reset.2. Enter the password > selectExternal Memory Reset.
note:The default password is 1234.
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
19/105
Making, receiving and endin
Options durinChecking Speed
Using addreUsing your h
Service and xed dialing n
Calls and address b
32
Memo
Breeze Mode - Calls and address
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
20/105
34
Making, receiving andending a call
Making a call1. Enter the area code and
phone number.2. PressS.
Answering a call1. PressSor select Accept.
Ending a call1. PressE.
Once the call is completed, a callsummary is displayed.
Rejecting a callPressEor select Ignore.
Making a call using the call listYour phone logs up to 20dialed, received and missed callnumbers.
1. PressS to display the recentcalls list.
2. Select All Calls, Missed Calls,Received Calls, Dialed Callsor Call Ranking by pressing
L/R.3. Select a number.4.PressS to dial the selected
number.note:To redial the last number, press
and holdS in standby mode.
Making a call during a call1. Enter the phone number
or select Options > ViewContacts.
2. PressS to dial the secondcall.The rst call is automaticallyput on hold.
Switching between two calls1. Select Options > Swap.
Making an international call1. Press and hold0 for the
international prex until the+,character appears.
2. Type the country code, arcode, and phone number
3. PressS.
Making an emergency ca1. You can make emergency
calls even if your phone dnot have a SIM card.
2. Press Emergency Numbeselect SOSif your phone dnot have a SIM card.
3. PressS.
Replying to a missed call1. PressS to display the c
list.
Breeze Mode - Calls and address
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
21/105
36
2. Select Missed Calls bypressingL/R.
3. Select a number to call bypressingU/D.
4. PressS.
Answering a second callN
1. PressS. The rst call isautomatically put on hold.
2. PressEto end the second
call. The call on hold isautomatically reconnected.
note:For answering a second call, you
should activateCall Waitingin advance.
(SelectMenu> Settings> Call>Call
Waiting > Activate in Advanced Mode.)
Options during a call
Microphone off and on
Switching your phonesmicrophone off
1. Select Options > Mute [ ].
Switching your phonesmicrophone back on
1. Select Options > Unmute.
Talking on speaker1. Select [ ].
Removing background noiseYou can eliminate backgroundnoise from conversations andimprove the voice quality of
communications by settingNoise Suppression to On.
1. Select Options> NoiseSuppression.
Putting a call on hold andreturningN
Putting a call on hold1. Select Options > Hold or
pressS.Returning to a held call
1. Select Options > Unhold orpressSagain.
Multi-party callsN
You can talk with more than operson or have a conference
Making a multi-party call1. Call the rst participant.
2. Call the second participanThe rst call is automaticaput on hold.
3. Select Options > Join.
Having a privateconversation with oneparticipant
1. Select Options > Split.2. Select a participant > Sele
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
22/105
Breeze Mode - Calls and address
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
23/105
40
ranking, select an entry andOptions.
Viewing missed calls1. Select Shortcuts in standby
mode.
2. Select Recent Calls > MissedCalls.
Viewing received calls
1. Select Shortcuts in standbymode.2. Select Recent Calls >
Received Calls.
Viewing dialed calls1. Select Shortcuts in standby
mode.
2. Select Recent Calls > DialedCalls.
Viewing call rankings1. Select Shortcuts in standby
mode.
2. Select Recent Calls > CallRanking.
Deleting call logs
1. Select Shortcuts in standbymode.2. Select Recent Calls > Delete
Call Logs.3. Select All Calls, Missed Calls,
Received Calls, orDialedCalls.
note: If no logs exist, the message No
Call Exist appears.
Viewing call time1. Select Shortcuts in standby
mode.
2. Select Recent Calls > CallTime.
3.Last Call, Received Calls,Dialed Calls, and Total Calls
are displayed.
Resetting all call times1. Select Shortcuts in standby
mode.2. Select Recent Calls > Call
Time.
3. Select Reset > Yes.note:The default password is 1234
Viewing data transmittinformation
1. Select Shortcuts in standmode.
2. Select Recent Calls > PacCounter. Current Info: You can vi
transmitted data in thecurrent session, in KilobySent, Received andTotinformation are alsoavailable.
Last Info: You can viewSent, Received, Total an
Breeze Mode - Calls and address
i i d 0 i f d di l C
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
24/105
42
Duration transmittedin previous sessions, inKilobytes.
Total Info: You can view allSent, Received, Total andDuration transmitted data inKilobytes.
Clear Logs: The defaultpassword is 1234.
Speed dialingYou can dial quickly using speeddialing. Up to 8 phone numberscan be programmed usingnumbers 2 to 9.1 : Voice mail
0 : Prex for international call
Setting speed dial1. Select Menu > Address Book >
Settings.2. Select Speed Dial > an empty
entry and select Add.3. Select a contact > Select.
Changing speed dial contact
1. Select Menu > Address Book >Settings.2. Select Speed Dial and select a
number.3. Select Change.4. Select Select > Yes.
Removing from speed dial1. Select Menu > Address Book >
Settings.2. Select Speed Dial and select a
number.
3. Select Remove > Yes.
Using address bookYou can save names, phonenumbers, and information on theSIM or phone. Number of entriescan depend on the capacity ofthe SIM card.
Adding a contact1. Select Menu > Address Book >
Contacts > Options > Add
New Contact.2. Select Phone or SIM.3. Input the elds.4. Select Save.
Viewing the contact list1. PressDor select Menu >
Address Book > Contacts
Searching for a phone
number1. PressDor select Menu >Address Book > Contacts
2. Input the rst letter or twothe persons name and scwithU/D.
Breeze Mode - Calls and address
3 S l t S l t t i d t il C t t B i F 2G SIM d thi t i t 3 S l t F it G
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
25/105
44
3. Select Select to view detailinformation.
4. To update information, selectOptions > Edit Contact.
Calling from contact list1. PressDor select Menu >
Address Book > Contacts.2. Select a contact to call.
3. PressS.
Sending a contact1. PressDor select Menu >
Address Book > Contacts.2. Select a contact > Options >
Send Contact Info > AllContact Info, Personal
Contact, orBusinessContact.
3. You can send the contactusing Message or Bluetooth.
Deleting a contact1. PressDor select Menu >
Address Book > Contacts.2. Select a contact > Options >
Delete > Yes.
Making groups1. PressD,R or select Menu >
Address Book > Groups.2. Select Options > Add New
Group.3. Select Phone or SIM.
For a 2G SIM card, this step is notneeded.
4. Enter a group name andselect Save.
Editing groups1. PressD,Ror select Menu >
Address Book > Groups.2. Select a group > Options >
Add New Group, Rename
Group, orDelete Group.Adding to favorites orgroups
1. PressDor select Menu >Address Book > Contacts.
2. Select a contact > Options >Add to.
3. Select Favoritesor Group
Using your headsetYou can make or receive a causing your headset. When yoconnect your headset to thethe button on the headset was follows.note:You must use the headset
designed for this device. It is an op
item. Not all headset will have a but
While in standby mode1. Press the button once to
recent calls.2. Press the button twice to
redial the last call.
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
26/105
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
27/105
Breeze Mode - Messa
Adding a saved picture to 7 Select Send to > a contact > To go back to text editor page 4 Scroll to the saved video c
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
28/105
50
Adding a saved picture tothe message
1. PressUor select Menu >Messaging > CreateMessage.
2. Enter a message.
3. Select Insert > Picture >Picture > Camera.
4. Scroll to the saved picture and
select Select.5. To preview the message,
select Options > Preview >Current or Whole Message.
6. To edit the text message,pressU/Dto select the textbox and edit your message.
7. Select Send to > a contact >Select > Send.
Adding a new picture to themessage
1. PressUor select Menu >Messaging > CreateMessage.
2. Enter a message.3. Select Insert > Take New
Picture.4. Focus on the object.5. Press@orQ.
6. To preview the message,select Options > Preview >Current or Whole Message.
To go back to text editor page,select Stop.
7. To edit the text message,pressU/Dto select the textbox and edit your message.
8. Select Send to > a contact >Select > Send.
For details on taking a picture,see page 60.
Adding a saved video to themessage
1. PressUor select Menu >Messaging > CreateMessage.
2. Enter a message.3. Select Insert > Video > Video.
4. Scroll to the saved video cand select Select.
5. To preview the message,select Options > PreviewCurrent or Whole MessagTo go back to text editor pselect Stop.
6. To edit the text message,pressU/Dto select the te
box and edit your messag7. Select Send to > a contacSelect > Send.
Breeze Mode - Messa
Adding a new video to the To go back to text editor page 3 Select Insert > Sound > Audio Adding a new voice mem
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
29/105
52
Adding a new video to themessage
1. PressUor select Menu >Messaging > CreateMessage.
2. Enter a message.
3. Select Insert > Record NewVideo.
4. Focus on the object.
5. Press@orQ,
or selectOptions > Record.
6. To stop and save therecording, select Stop.
7. To preview the message,select Options > Preview >Current or Whole Message.
To go back to text editor page,select Stop.
8.To edit the text message,pressU/Dto select the textbox and edit your message.
9. Select Send to > a contact >Select > Send.
For details on recording a video,see page 62.
Adding a recorded voicememo to the message
1. PressUor select Menu >Messaging > CreateMessage.
2. Enter a message.
3. Select Insert > Sound > Audio> My Voice.
4. Scroll to the saved audio clipand select Select.
5. To preview the message,select Options > Preview >Current or Whole Message.
6. Select Pause to stop listeningthe voice memo. Select Stop
to go back to text editor page.7. To edit the text message,pressU/Dto select the textbox and edit your message.
8. Select Send to > a contact >Select > Send.
Adding a new voice memthe message
1. PressUor select Menu >Messaging > CreateMessage.
2. Enter a message.
3. Select Insert > Record NeSound.
4. Select Record to record t
sound.5. To stop and save the
recording, select Stop.6. To preview the message,
select Options > PreviewCurrent or Whole Messag
Breeze Mode - Messa
7. Select Pause to stop listening 3. Select Insert > Other Files > Managingmessaging Deleting a message in th
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
30/105
54
p gthe voice memo. Select Stopto go back to text editor page.
8. To edit the text message,pressU/Dto select the textbox and edit your message.
9. Select Send to > a contact >Select > Send.
For details on Recording a voicememo, see page 150.
Adding other les to themessage
1. PressUor select Menu >Messaging > CreateMessage.
2. Enter a message.
Other Files.4. Select a le > Select.5. To preview the message,
select Options > Preview >Current or Whole Message.To go back to text editor page,select Stop.
6. To edit the text message,
pressU/D
to select the textbox and edit your message.7. Select Send to > a contact >
Select > Send.
Managing messagingmemoryUp to 200 messages can bestored in the phone memory,additional messages will besaved to the SIM card. Whenthe message box is full, themessages full icon will appear. Allmessages share memory.
Icon DescriptionsText message is full (SIM and
phone messages).
Deleting a message in thinbox
1. Select a message > OptioDelete > Yes.
Deleting multiple messagin the inbox
1. Select Options > Delete >Multiple.
2.Select Select or Deselect
to select or deselect themessage.
3. Select Options > Delete >
Email
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
31/105
56
3C
Photo
Video
Multim
EmailYou can receive emails from yourservice provider.
Receiving an email1. PressL or select Menu >
Messaging > Mobile Email.2. Select an email.3. Select Select.
Breeze Mode - Multim
Camera Setting camera settings Icon Name Descriptions
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
32/105
58
You can take pictures and record movies using the built-in camera.The photos and video clips can be saved and sent via multimediamessages, Online Locker, or Bluetooth.
Zoom Zoom
Pictureremaining
Brightness BrightnessSelf Timer Self Timer
Effect Effect
WhiteBalance
WhiteBalance
Size Size
Cameramode
Videomode
note: When you set the photo size to 1280 x 1024, the zoom function is not available.
g g1. PressQin standby mode or
select Menu > Camera > Takea Picture.
2. Select Options > Settings tochange settings prior to takinga picture.
Camera optionsIcon Name Descriptions
White
Balance
Auto ( ), Day Light( ), Tungsten ( ),
Fluorescent ( )
Effect
Normal ( ), Sepia
( ), Negative ( ),
B&W ( )
p
Self TimerOff ( ), 5 secs
( ), 10 secs (
Size
1280x1024 (
1024x768 ( )
640x480 ( )
320x240 ( ),
240x320 ( )
Advanced
Picture Quality
Location, Shut
Sound, TimerSound
Breeze Mode - Multim
Video camera options Zoom in and out Changing to video camera Viewing the taken picture
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
33/105
60
Icon Name Descriptions
White
Balance
Auto ( ), Day Light
( ), Tungsten ( ),
Fluorescent ( )
Effect
Normal ( ), Sepia
( ), Negative ( ),
B&W ( )
Self TimerOff ( ), 5 secs
( ), 10 secs ( )
Size
176x144(MMS)
( ), 176x144 ( ),
320x240 ( )
Advanced
Video Quality,
Sound Recording,
Save Location,
Timer Sound
1. PressU/D.It ranges from 1 x to 4 x.
Increasing or decreasing thebrightness
1. PressL/R.It ranges from -2 to +2.
Taking a picture1. PressQin standby mode or
select Menu > Camera > Takea Picture.
2. Focus on the object.
3. Press@orQ, or selectOptions > Capture.
mode1. PressQin standby mode or
select Menu > Camera > Takea Picture.
2. Select Options while cameramode is activated.
3. Select Video Camera Mode.In camera mode, press and
holdQto change to videocamera mode.
4. Focus on the object.
5. Press@orQ, or selectOptions > Record.
6. Select Stop to stop recording.
1. PressQin standby modeselect Menu > Camera > Ta Picture.
2. Select Options > PhotoAlbum.
3. Select a picture > View.
After taking picturesTo Press
Send usinga multimedia
message
Options> Send
Multimedia Mes
Send using
Online Locker
Options> Send
Send to Online
Locker
Breeze Mode - Multim
To Press 4. Select Stop to stop recording.5 S l O i Pl l
Viewing the recorded videoli
To Press
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
34/105
62
Send using
Bluetooth
Options> Send > via
Bluetooth
Set as
wallpaper
Options> Set as >
Wallpaper
Set as Caller IDOptions> Set as >
Caller ID
Delete Options> Delete
Rename Options> Rename
View photo
information
Options> Properties
Recording a video1. Select Menu > Camera >
Record a Video.2. Focus on the object.
3 Press@orQ, or selectOptions > Record.
5. Select Options > Play to playthe video clip.
6. PressC to go back topreview mode.
Changing to camera mode1. Select Menu > Camera >
Record a Video.2. Select Options while video
mode is activated.3. Select Camera Mode.
In video camera mode, pressan holdQto change to cameramode.
For details on taking a picture,see page 60.
clip1. Select Menu > Camera >
Record a Video.2. Select Options > Video
Album.3. Select the video clip > Play.
After recording video clipsTo Press
Send usinga multimedia
message
Options> Send > as
Multimedia Message
Send using
Online Locker
Options> Send > Send
to Online Locker
Send using
Bluetooth
Options> Send > via
Bluetooth
View recorded
video clipOptions> Play
Delete Options> Delete
Rename Options> Renam
View video clip
informationOptions> Proper
During recording a videoTo Press
Receivean incoming call
Sor@
Pause and record
continuouslyPause
Stop recording Stop
Breeze Mode - Multim
Photo album Viewing the saved pictures1 S l t M C M
Setting as caller identication1 S l t M C M
Deleting multiple picture1 S l t M C M
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
35/105
64
TheMy Pictures menu allowsyou to view all the pictures youhave taken, save selected imagesto your phone or an externalmemory card and share thephotos with others. JPEG formatis supported, and other formatsare saved in the Picture folder.note:To access Picture, select Menu >
My Stuff > Picture in Advanced mode.
1. Select Menu > Camera > MyPictures.
2. Select a picture > View.
Setting as wallpaper in thedisplay
1. Select Menu > Camera > MyPictures.
2. Select a picture.
3. Select Options > Set as >Wallpaper.
1. Select Menu > Camera > MyPictures.
2. Select a picture.
3. Select Options > Set as >Caller ID.
Sending pictures usingmultimedia message
1. Select Menu > Camera > My
Pictures.2. Select a picture.
3. Select Options > Send > asMultimedia Message.
For details on creatingmultimedia messages, see page49.
1. Select Menu > Camera > MPictures.
2. Select Options > MultipleSelect.
3. Select Select to select mothan one picture.
4. Select Deselect to canceyour selection.
5. Select Options > Delete.Viewing a le information
1. Select Menu > Camera > MPictures.
2. Select a picture.
3. Select Options > Propert
Breeze Mode - Multim
Video albumTh M Vid ll
Using video player controlsT P
Sending a video clip usingOnline Locker
Deleting multiple video c1 Select Menu > Camera > M
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
36/105
66
TheMy Videos menu allows youto play, send, save and deletevideos. The supported formatsare MP4, WMA, 3GP and 3G2.
Playing the saved video clips1. Select Menu > Camera > My
Videos.2. Select a video clip.
3. Select Play.
To Press
Pause / Play @
Rewind HoldU
Fast forward HoldD
Control
volume
Side key up or down
orL/R
Sending a video clip usingmultimedia message
1. Select Menu > Camera > MyVideos.
2. Select a video clip.
3. Select Options > Send > asMultimedia Message.
For details on creating multimediamessages, see page 49.
Online Locker1. Select Menu > Camera > My
Videos.2. Select a video clip.
3. Select Options > Send > Sendto Online Locker.
Sending a video clip viaBluetooth
1. Select Menu > Camera > MyVideos.
2. Select a video clip.
3. Select Options > Send > viaBluetooth.
1. Select Menu > Camera > MVideos.
2. Select Options > MultipleSelect.
3. Select Select to select mothan one picture.
4. Select Deselect to canceyour selection.
5. Select Options > Delete.
Memo
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
37/105
68
4Ca
Alar
Pill ReUseCal
Tip calStop
Say a comReadou
Useful Feat
Breeze Mode - Useful feat
CalendarCalendar helps you
In the monthly viewTo Press
note:You can create events for dates
from 01/01/2000 to 12/31/2099.Editing existing alarms
1 Select Menu > Tools > Ala
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
38/105
70
Calendar helps youmanage yourschedule includingyour time for calls orspecial days. You canset a reminder onany given date withthis function.
Viewing calendar1. Select Menu > Tools >
Calendar.note:You can also access Calendar by
pressingC in standby mode. View by
Month is default setting for Calendar.
To Press
Move to
another day
L for Previous
R for Next
Move to
another week
U for Previous
D for Next
View other
month
Side key down for
Previous
Side key up for Next
Creating a new event1. Select a day and selectOptions > New Event.
2. Select Appointment, Task orNote.
3. Input the event and selectSave.
/ / / /
Alarm clock
Setting an alarm1. Select Menu > Tools > Alarm
Clock.2. Select Create New for new
alarm.3. Set the Cycle, Time, Alarm
Sound, Alarm Alert Type,Alarm Volume, Snooze andPower Alarm.
4. Select Save.
1. Select Menu > Tools > AlaClock.
2. Select an alarm > Edit or sOptions to access followiCreate New, Delete andDelete All.
Setting a simple alarm1. Select Menu > Tools > Ala
Clock.2. Select Simple Alarm and
select Edit.3. Set the alarm schedule an
select Save.
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
39/105
Breeze Mode - Useful feat
Calculator1 Select Menu > Tools
Tip calculator1 Select Menu > Tools
Stop watch1 Select Menu > Tools
access the stop watch by re-enteri
the stop watch menu.
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
40/105
74
1. Select Menu > Tools> Calculator.
2. Input the numberswith the numerickeypad and enterthe operators withL/R/U/D/@to calculate.
3. Press* to use the decimalpoint.
4. PressC to cancel yourinput.
5. Select Reset to reset.
1. Select Menu > Tools> Tip Calculator.
2. Enter the valuesfor all the variableelds (Bill($),Tip(%), Split)and then the correspondingcalculation elds (Tip($),Total($), You Pay) areupdated automatically.
3. Press* to use the decimalpoint.
4. Select Reset to reset.
1. Select Menu > Tools> Stop Watch.
2. Select Start tostart.
3. Select Stop to stop.4. Select Continue to
restart or select Reset to clear.5. To check split times, select
Mode> Split Time Mode.6. To check lap times, selectMode> Lap Time Mode.
note: In Basic Mode, when you exit the
stop watch menu, or become idle, the
stop watch will continue running and
will be indicated by a clock icon. You can
Say a CommandYour phone is equipped withan Advanced Voice Comma(AVC) feature. This feature ayou to make calls or use thephone functions by simply uyour voice. All you have to do
talk into the phone and then phone will recognize your voand complete tasks by itself.
1. In standby mode, simplypressNto access Say aCommand.
Breeze Mode - Useful feat
Or select Menu > AT&TServices > Say a Command.
Send Message :Display the Create Message
Readout ModeReadout Mode makes your
Announces highlighted itemin Menus as user navigates
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
41/105
76
2. At the voice prompt, say acommand and simply followthe voice prompts.
The following list shows availablevoice commands.Call : Voice dialsa name or phone number inyour address book. If multiple
numbers exist, say the name andthe number type (i.e. mobile,home, work, or other).
screen with the contact you havespoken.Contact : Retrieve anddisplay the contact informationstored in the address book.
Go To : Open anapplication on your phone.
Check : Check the statusinformation of your phone(Status, Voicemail, Messages,Missed Calls, Time, Signalstrength, Battery, My PhoneNumber, and Volume).
Readout Mode makes yourphone a useful companion whenyou cant or dont have the abilityto read the phone screen.
When Readout mode isactivated, the phone willannounce key alert, navigation,and content information verbally.
Provides verbal alerts of thefollowing: Missed Call
New Message received Low Battery Message Sent and other
conrmation notications
phone
Announces numbers as theare pressed on keypad
Reads out text messagecontent
To turn on Readout Mode1. Select Menu > Settings >
Voice Command Setting2. Select Audio Modes >Readout mode.
5Memo
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
42/105
78
5Blu
Using Mob
Connect
Breeze Mode - Connec
BluetoothBluetooth technology enables
Bluetooth IconIco n Descriptions
Activating Bluetooth1. Select Menu > Settings >
Sending les1. After pairing with the targ
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
43/105
80
free wireless connectionsbetween electronic deviceswithin a maximum range of 33feet (10 meters). Bluetoothconnections can be used to sendimages, text, business cards,calendar events, or to connectto computers using Bluetooth
technology.
Your mobile phone supports: Connect to PC to access internet.
Connect to Hands-Free. Connect to electronic devices.
Bluetooth is active.
Bluetooth hands-free
headset is connected.
Bluetooth A2DP headset is
connected.
Bluetooth hands-free +
A2DP headset is connected.
Data transfer via Bluetooth.
note:Advance Audio Distribution
Prole (A2DP) is a Bluetooth prole
(mode) which is designed to transfer a
uni-directional 2-channel stereo audio
stream to a headset or car audio.
Bluetooth> Activation.
2. Select On or Off.
Adding a device1. Select Menu > Settings >
Bluetooth > My Devices.2. Select Search for Devices >
Search.
3. The available device will bedisplayed.
4. Select a device and selectSelect.
5. Enter password and [email protected]:The target device must be in
discoverable mode.
device, select Options > SFiles.
2. Select a le(s) from AudioPicture, Video or Other F
note: If the target device requests
pairing, the le is sent after pairing
is completed. Locked les or ones
containing original rights may not b
transmitted.
Receiving lesThe receipt should be approbefore receiving a le(s).The received le(s) will be sain the corresponding folder.
For example, if you receivedcontacts information from the
d it ill b d i
Naming the phone1. Select Menu > Settings >
Bl h M Bl h I f 6
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
44/105
82
sender, it will be saved in yourphones memory.
1. After pairing with the targetdevice, select Options > TakeFiles.
2. The available les will bedisplayed.
3. Select a le and select
Options > Copy.
Setting the visibility1. Select Menu > Settings >
Bluetooth > Visibility.2. Select Show or Hide.3. Select OK.
Bluetooth > My Bluetooth Info.2. Select Name > Edit.3. Enter the new name and
select Save.note:The device name is what identies
your phone to Bluetooth network.
Using Mobile Web
Accessing Mobile Web1. Press@ in standby mode or
select Menu > AT&T Services >Mobile Web.
note: It will access the Mobile Web
homepage.
6Phone
Sounds an
Display sVoice Command
Sett
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
45/105
Memo
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
46/105
86
Making, receiving and endin
Call sChecking Speed
Using addreUsing your h
Service and xed dialing nCaller identi
Calls and address bwith Advanced
Advanced Mode - Calls and address
Advanced Mode offers additionalfeatures and functionalityassociated with making calls and
Once the call is completed, a callsummary is displayed.
R j ti ll
3. Select a number.4. PressS to dial the selected
number
Making an international c1. Press and hold0key fo
international prex until th
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
47/105
88
associated with making calls andusing address book.
Making, receiving andending a call
Making a call1. Enter the area code and
phone number.2. PressS.
Answering a call1. PressSor select Accept.
Ending a call1. PressE.
Rejecting a callPressEor select Ignore.
Making a call using the calllistYour phone logs up to 20dialed, received and missed callnumbers.
1. PressS to display the recentcalls list.
2. Select All Calls, Missed Calls,Received Calls, Dialed Callsor Call Ranking by pressingL/R.
number.note:To redial the last number, press
and holdS in standby mode.
Making a call during a call1. Enter the phone number
or select Options > ViewContacts.
2. PressS to dial the
second call. The rst call isautomatically put on hold.
Switching between two calls1. Select Options > Swap.
international prex until th+,character appears.
2. Type the country code, arcode, and phone number
3. PressS in standby mod
Making an emergency ca1. You can make emergency
calls even if your phone dnot have a SIM card.
2. Press Emergency Numbeselect SOSif your phone dnot have a SIM card.
3. PressS.
Advanced Mode - Calls and address
Replying to a missed call1. PressS to display the calls
list
note:For answering a second call, you
should activate Call Waiting in advance.
(SelectMenu> Settings> Call>Call
Making a multi-party call1. Call the rst participant.2 Callthesecondparticipant
2. Select the number assocwith the call you wish to enEnd All to end all calls.
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
48/105
90
list.2. Select Missed Calls by
pressingL/R.3. Select a number to call by
pressingU/D.4. PressS.
Answering a second callN
1. PressS. The rst call is
automatically put on hold.2. PressE to end the second
call. The call on hold isautomatically reconnected.
Waiting >Activate in Advanced mode. )
Putting a call on hold andreturningN
Putting a call on hold1. Select Options > Hold or
pressS.
Returning to a held call1. Select Options > Unhold orpressSagain.
Multi-party callsN
You can talk with more than oneperson or have a conference call.
2. Call the second participant.The rst call is automaticallyput on hold.
3. Select Options > Join.
Having a privateconversation with oneparticipant
1. Select Options > Split.2. Select the participant >Select.
Removing one participantfrom a multi-party call
1. Select Options > End.
End All to end all calls.
Searching for a number iaddress book during a ca
1. Select Options > ViewContacts.
2. Select a number >S.
Searching for a name or
group in address bookEnter the rst letters of the nfor Name Search. The entriedisplayed starting with the entry matching your input.
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
49/105
Advanced Mode - Calls and address
2. Select Recent Calls > MissedCalls.
Viewing received calls
2. Select Recent Calls > CallRanking.
Deleting call logs
2. Select Recent Calls > CallTime.
3.Last Call, Received Calls,
Viewing data transmittinformation
1. Select Menu > My Stuff >
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
50/105
94
Viewing received calls1. Select Menu > My Stuff >
Tools.2. Select Recent Calls >
Received Calls.
Viewing dialed calls1. Select Menu > My Stuff >
Tools.2. Select Recent Calls > Dialed
Calls.
Viewing call rankings1. Select Menu > My Stuff >
Tools.
Deleting call logs1. Select Menu > My Stuff >
Tools.2. Select Recent Calls > Delete
Call Logs.3. Select All Calls, Missed Calls,
Received Calls, orDialedCalls.
note: If no logs exist, the messageNo
Call Exist appears.
Viewing call time1. Select Menu > My Stuff >
Tools.
Dialed Calls, and Total Callsare displayed.
Resetting all call times1. Select Menu > My Stuff >
Tools.2. Select Recent Calls > Call
Time.3. Select Reset > Yes.
note:The default password is 1234.
. Se ect Menu My StuffTools.
2. Select Recent Calls > PacCounter. Current Info: You can vi
transmitted data in thecurrent session, in KilobySent, Received andTot
information are alsoavailable.
Last Info: You can viewSent, Received, Total anDuration transmittedin previous sessions, inKilobytes.
Advanced Mode - Calls and address
Total Info: You can view allSent, Received, Total andDuration transmitted data in
Setting speed dial1. Select Menu > Address Book >
Settings.
Removing from speed dial1. Select Menu > Address Book >
Settings.
2. Select Phone or SIM.3. Input the elds.
4. Select Save.
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
51/105
96
Kilobytes. Clear Logs: The default
password is 1234.
Speed dialingYou can dial quickly using speeddialing. Up to 8 phone numbers
can be programmed usingnumbers 2 to 9.1 : Voice mail0 : Prex for international call
g2. Select Speed Dial > an empty
entry and select Add.3. Select a contact > Select.
Changing speed dial contact1. Select Menu > Address Book >
Settings.
2. Select Speed Dial and select anumber.3. Select Change.4. Select a contact > Select > Yes.
g2. Select Speed Dial and select a
number.
3. Select Remove > Yes.
Using address bookYou can save names, phonenumbers, and information on the
SIM or phone. Number of entriescan depend on the capacity ofthe SIM card.
Adding a contact1. Select Menu > Address Book >
Contacts > Options > AddNew Contact.
Viewing the contact list1. PressDor select Menu >
Address Book > Contacts
Searching for a phonenumber
1. PressDor select Menu >
Address Book > Contacts2. Input the rst letter or two
the persons name and scwithU/D.
3. Select Select to view detainformation.
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
52/105
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
53/105
Memo
2
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
54/105
P2000
102
Receiving meCreating and sending text me
Creating multimedia meMessage tem
Message sManaging messaging m
Using instant mes
Messagwith Advanced
2
Advanced Mode - Messa
When your phone is set toAdvanced Mode, you canuse additional features andfunctionality associated with
Saving the contactinformation from a receivedmessage
1 S l t i d
It will be saved in one of thecategories in the My Stuff folder.For details on Photo album, seepage 126
2. Select a message whichincludes an URL.
3. Select the URL and selectOptions > Use
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
55/105
104
functionality associated withmessaging.
Receiving messages
Viewing a new message1. Select View.
Reading a message from theconversation
1. Select Menu > Messaging >Conversations.
2. Select a conversation > Open.
1. Select a received message >View.
2. Select Options > Save.3. Select New Contact or
Update Contact.
Saving the object in a
received multimediamessage1. Open a multimedia message.
2. Select an object.3. Select Options > Use> Save.
page 126.
Listening to voice messages1. Press and hold1or select
Menu > Messaging > VoiceMail.
It will automatically call the voicemail center.
Launching URL in themessage
1. Select Menu > Messaging >Conversations.
Options > Use.
Saving connection settinusing Congurationmessage
1. Select Menu > MessagingConversations.
2. Select an over the air (OTAmessage.
3. Select Options > Install.
Advanced Mode - Messa
Creating and sendingtext messages
Sending a text message
6. To view the sent message,select Menu > Messaging >Conversations.
note:Allsuccessfullysent messages
Creating multimediamessagesYou can create and send
lti di C it
3. Select Insert > Picture >Picture > Camera.
4. Scroll to the saved pictureselect Select
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
56/105
106
g g1. PressUor select Menu >
Messaging > CreateMessage.
2. Enter a message.3. To save the message as a
draft, select Options > Save toDrafts
.4. Select Send to and select acontact to send the messageand select Select.
5. Select Send.
note:All successfully sent messages
will be saved in Conversationswhile the
messages failed to be sent will be saved
in Outbox.
Finding all sent messages1. Select Menu > Messaging >
Conversations.
Replying to a message1. Select a message > Reply or
select a message > Options >Reply.
multimedia messages. Capacityis 100KB, 300KB or 600KB. Anerror message will alert youonce the message exceeds thecapacity.
Adding a saved picture tothe message
1. PressUor select Menu> Messaging > CreateMessage.
2. Enter a message.
select Select.5. To preview the message,
select Options > PreviewCurrent or Whole Messag
6. To edit the text message,pressU/Dto select the tebox and edit your messag
7. Select Send to and selectcontact to send the messand select Select.
8.Select Send.
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
57/105
Advanced Mode - Messa
9. Select Send to > a contact >Select > Send.
For details on recording a video,see page 124.
5. To preview the message,select Options > Preview >Current or Whole Message.
6.Select Pause to stop listening
Adding a new voice memo tothe message
1. PressUor select Menu >Messaging > Create
7. Select Pause to stop listethe voice memo or selectStop to go back to text edpage.
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
58/105
110
see page 124.
Adding a recorded voicememo to the message
1. PressUor select Menu >Messaging > CreateMessage.
2. Enter a message.
3. Select Insert > Sound > Audio> My Voice.
4. Scroll to the saved audio clipand select Select.
6. Select Pause to stop listeningthe voice memo or selectStop to go back to text editorpage.
7. To edit the text message,pressU/Dto select the textbox and edit your message.
8.Select Send to > a contact >Select > Send.
Messaging > CreateMessage.
2. Enter a message.
3. Select Insert > Record NewSound.
4. Select Record to record thesound.
5. To stop and save therecording, select Stop.
6. To preview the message,select Options > Preview >Current or Whole Message.
p g8.To edit the text message,
pressU/Dto select the tebox and edit your messag
9. Select Send to > a contacSelect > Send.
For details on Recording a vo
memo, see page 150.Adding other les to themessage
1. PressUor select Menu >Messaging > CreateMessage.
Advanced Mode - Messa
2. Enter a message.3. Select Insert > Other Files >
Other Files.4. Select a le and select Select.
Message templatesWhen you often use the samephrases, you can save themessage under message
Sending a message withtemplate
1. Select Menu > Messaging >Templates.
Message settings
Setting text message1. Select Menu > Messaging
S tti
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
59/105
112
5. To preview the message,select Options > Preview >Current or Whole Message.To go back to text editor page,select Stop.
6. To edit the text message,
pressU/Dto select the textbox and edit your message.7. Select Send to > a contact >
Select > Send.
message under messagetemplates.
Adding the message as atemplate
1. Select Menu > Messaging >Templates.
2. Select Options > Add New.3. Write the frequently used
message > Options > Save.
Templates.2. Select a message to send.
3. Select Send to add moremessages.
4. Select Send to > a contact >Select > Send.
note:You can add a template while
entering a message. Write a message >Insert > Templates. Select a template to
add.
Settings.2. Select Text Massage.3. Enter new Center Addres4. Enter new Email Gateway5. Select Save.
Setting proles for
multimedia message1. Select Menu > Messaging
Settings.2. Select Multimedia Messa
MMS Proles.
Advanced Mode - Messa
3. Select a prole and selectSelect.
Setting sending options formultimedia message
Setting receiving options formultimedia message
1. Select Menu > Messaging >Settings.
note:This number may be pre-
congured by the service provider upon
activation.
Setting default edit mode
1. Select Menu > MessagingSettings.
2. Select Auto Delete OldMessage.
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
60/105
114
multimedia message1. Select Menu > Messaging >
Settings.2. Select Multimedia Message>
Sending Settings.3. Select Creation Mode or Max
Message Size > Select.
4. Select a desired option >Select.
g2. Select Multimedia Message
> Receiving Settings >Automatic Download.
3. Select Onor Off> Select.
Setting receiving options forvoice message
1. Select Menu > Messaging >Settings.
2. Select Voice Mail.3. Enter the number of the voice
mail center > Save.
g1. Select Menu > Messaging >
Settings.2. Select Default Edit Mode.3. Select Alphabet or Predictive
and select Select.
Setting auto delete oldmessageWhen message memorycapacity (Max. 200 messages)is full, the oldest message will bedeleted automatically.
3. Select Onor Off> Select.
Managing messaginmemoryUp to 200 messages can bestored in the phone memory
additional messages will besaved to the SIM card. Whenthe message box is full, themessages full icon will appeamessages share memory.
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
61/105
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
62/105
Advanced Mode - Multim
In Advanced Mode, you can use the full features of multimedia thatP2030 offers.
CameraYou can take pictures and record movies using the built-in camera.
note: When you set the photo size to
1280 x 1024, the zoom function is not
available.
Setting camera settingsQ db d
Icon Name Descriptions
Effect
Normal ( ), Se
( ), Negative
B&W ( )
ff
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
63/105
120
The photos and video clips can be saved and sent via multimediamessages, Online Locker, or Bluetooth.
Zoom Zoom
Pictureremaining
Brightness BrightnessSelf Timer Self Timer
Effect Effect
WhiteBalance
WhiteBalance
Size Size
Cameramode
Videomode
1. PressQin standby mode orselect Menu > My Stuff > Tools> Camera.
2. Select Options > Settings tochange settings prior to takinga picture.
Camera optionsIcon Name Descriptions
White
Balance
Auto ( ), Day Light
( ), Tungsten ( ),
Fluorescent ( )
Self TimerOff ( ), 5 secs
10 secs ( )
Size
1280x1024 (
1024x768 ( )
640x480 ( ),
320x240 ( ),
240x320 ( )
AdvancedPicture Quality,Location, Shutt
Sound, Timer S
Advanced Mode - Multim
Video camera optionsIcon Name Descriptions
White
Balance
Auto ( ), Day Light
( ), Tungsten ( ),
Fluorescent( )
Zoom in and out1. PressU/D.
It ranges from 1 x to 4 x.
Increasing or decreasing the
note:Your photo will be saved
automatically in My Stuff> Picture>
Camera.
Changing to video camerad
5. Press@orQ, or selectOptions > Record.
6. Select Stop to stop recornote:Your video will be saved
automatically in My Stuff > Video
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
64/105
122
Fluorescent ( )
Effect
Normal ( ), Sepia
( ), Negative ( ),
B&W ( )
Self TimerOff ( ), 5 secs ( ),
10 secs ( )
Size
176x144(MMS)
( ), 176x144 ( ),
320x240 ( )
Advanced
Video Quality,
Sound Recording,
Save Location,
Timer Sound
g gbrightness
1. PressL/R.It ranges from -2 to +2.
Taking a picture1. PressQin standby mode
or select Menu>
My Stuff>
Tools>Camera.2. Focus on the object.
3. Press@orQ, or selectOptions > Capture.
mode1. PressQin standby mode
or select Menu>My Stuff>Tools>Camera.
2. Select Options while cameramode is activated.
3. Select Video Camera Mode.In camera mode, press andholdQto change to videocamera mode.
4. Focus on the object.
automatically in My Stuff> Video.
Viewing the taken picture1. PressQin standby mode
or select Menu>My StuffTools>Camera.
2. Select Options > Photo
Album.3. Select a picture > View.
Advanced Mode - Multim
After taking picturesTo Press
Send using
a multimedia
message
Options> Send >
as Multimedia
Message
Recording a video1. Select Menu > My Stuff > Tools
> Video Camera.2. Focus on the object.
3 Press@orQor select
3. Select Camera Mode.In video camera mode, pressan holdQto change to cameramode.
For details on taking a picture
After recording video clipTo Press
Send using
a multimedia
message
Options> Send
Multimedia Mes
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
65/105
124
message Message
Send using
Online Locker
Options> Send >
Send to Online
Locker
Send using
Bluetooth
Options> Send > via
Bluetooth
Set as
wallpaper
Options> Set as >
WallpaperSet as Caller ID
Options> Set as >
Caller ID
Delete Options> Delete
Rename Options> Rename
View photo
informationOptions> Properties
3. Press@orQ, or selectOptions > Record.
4. Select Stop to stop recording.5. Select Options > Play to play
the video clip.6. PressC to go back to
preview mode.Changing to camera mode
1. Select Menu > My Stuff > Tools> Video Camera.
2. Select Options while videomode is activated.
For details on taking a picture,see page 122.
Viewing the recorded videoclip
1. Select Menu>My Stuff>Tools>Video Camera.
2. Select Options > VideoAlbum.
3. Select the video clip > Play.
message
Send using
Online Locker
Options> Send
Send to Online
Locker
Send using
Bluetooth
Options> Send
Bluetooth
View recorded
video clip Options> PlayDelete Options> Delet
Rename Options> Rena
View video clip
informationOptions> Prop
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
66/105
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
67/105
Advanced Mode - Multim
3. Select Select to select morethan one video clip le.
4. Select Deselect to cancelyour selection.
5. Select Options > Delete.
Listening to the recordedsound
1. Select Menu > My Stuff >Audio > My Voice.
2 Select a recorded sound
Setting as a ring tone1. Select Menu > My Stuff > Audio.2. Select a sound.3. Select Options > Set as Ring
Tone
5. Select Deselect to canceyour selection.
6. Select Options > Copy toExternal Memory or Movto External Memory. The
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
68/105
130
p
Audio albumTheAudiomenu allows you toshop tones and answer tonesusing the WAP browser. You candownload desired audio les and
play with the built-in audio player.You can also send, save, anddelete audio les. The supportedle formats are MIDI, i-Melody,MP3, AMR, WAV, AAC, AAC+,WMA.
2. Select a recorded sound.
3. Select Play.
Using audio player controlsTo Press
Pause / Play @
Stop Stop
Rewind HoldL
Fast forward HoldR
Control
volume
Side key up or down
orU/D
Tone.note:The maximum ringtone le size is
300KB.
Moving or copying multiplesound to External Memory
1. Select Menu > My Stuff >
Audio.2. Select a sound le.
3. Select Options > MultipleSelect.
4. Select Select to select morethan one audio le.
yselected sound will be coor moved to the Audiofoin external memory card.
Sending sound le usingmultimedia message
1. Select Menu > My Stuff >Audio.
2. Select a sound le.3. Select Options > Send > a
Multimedia Message.
Advanced Mode - Multim
Music playerThe Music Player is an applicationthat can play MP3 and audio les.The supported le formats areMIDI, i-Melody, MP3, AMR, WAV,
Adding music from WindowsMedia Player
1. Connect the USB cable to thedevice and the computer.
2.Select Music Player > Select.
2. Select a category (All Music,Playlists, Albums, Artists,Genres) > Select.
3. Select All> Play to play allsongs in the All Music.
Icon Descriptions
Previous track with short p
Next track with short press
Repeat all tracks
Repeatsingletrack
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
69/105
132
, y, , , ,AAC, AAC+, WMA.
Icon Descriptions
Music is playing.
Music is paused.
Music is stopped.
note:A microSD card must be inserted
to transfer music to your phone.
2. Select Music Player Select.3. Open the Sync tab in Windows
Media Player in yourcomputer.
4. Select the music from the listand drag and drop to your
phone.note:Windows Media Player 11 andWindows XP version is required.
Playing music1. Select Menu > AT&T Music >
Music Player.
4. Select Options > Stop to stopplaying.
note:Music will pause when you receive
an incoming call and Music will resume
when the call ends.
Icon Descriptions
Volume level 7
Pause
Play
Rewind with long press
Fast Forward with long press
Repeat single track
Repeat off
Shufe On: the current list
songs are randomly shuf
for playback
Shufe Off: songs are play
order and not shufed
Making a playlist1. Select Menu > AT&T Musi
Music Player.2. Select Playlists > New Pla
Advanced Mode - Multim
3. Input Playlist Name and selectSave.
4. Select All Music, Albums,Artists or Genres.
5. Select a music le(s) and
3. Select All Music, Albums,Artistsor Genres.
4. Select a music le(s) > Select> Done.
5. To remove tracks from the
Listening music withBluetooth headset
1. While music is playing in thestandby mode, select Menu >AT&T Music > Music Player.
Bit Rate, Created, LicensandSharing.
Setting as ring tone1. Select Menu > AT&T Musi
Music Player
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
70/105
134
select Select to add to theplaylist.
6. Select Done.
Using a playlist1. To add tracks to a playlist,
select Menu > AT&T Music >Music Player > Playlists.
2. Select a playlist to add musicand select Options > AddTracks.
playlist, select Options >Remove Tracks > a musicle(s) > Select > Remove.
6. To rename the playlist, selectOptions > Rename Playlist >input new Playlist Name andselect Save.
7. To delete the playlist, selectOptions > Delete > Yes.
y2. Select Now Playing > Options
> Transfer to B/T Headset.
Viewing a music leinformation
1. While music is playing in the
player mode, select Options >Properties.
2. UseU/Dto view TrackNumber, Title, Artist, Album,Genre, Duration, Filename,File Size, Location, Format,
Music Player.2. Select a category (All Mus
Playlists, Albums, ArtistsGenres) > Select.
3. Select a le.4. Select Options > Set as R
Tone.note:You cannot set the music le
it is playing. If a music le is larger th
300KB, the le will be deactivated f
setting ring tone.
Advanced Mode - Multim
Deleting music1. Select Menu > AT&T Music >
Music Player.2. Select a category (All Music,
Playlists, Albums, Artists,
Listening the radio1. Select Menu > AT&T Music >
AT&T Radio.
Using music identication1 Select Menu > AT&T Music >
Music player settings
Shufing music1. Select Menu > AT&T Music >
Music Player.2 Select Settings > Shufe
Setting equalizer1. Select Menu > AT&T Musi
Music Player.2. Select Settings > Equaliz3. Select a category > Selec
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
71/105
136
Genres) > Select.3. Select a le.4. Select Options > Delete.
note: If the music le is playing, you
cannot delete it.
Shopping music1. Select Menu > AT&T Music >Shop Music.
2. To return to the previous page,pressC.
1. Select Menu > AT&T Music >Shazam.
3. Hold the phone close tomusic. Your phone will analyzethe music and display theartist, title, and album.
note:For the cost plan, contact yournearest service provider.
2. Select Settings > Shufe.3. Select Shufe On or Shufe
Off> Select.
Repeating music1. Select Menu > AT&T Music >
Music Player.2. Select Settings > Repeat.3. Select Repeat All Tracks,
Repeat Single Track orRepeat Off.
4.Select Select.
Auto Full Screen1. Select Menu > AT&T Musi
Music Player.2. Select Settings > Auto Fu
Screen.
3. Select Onor Offand seleSelect.
Removing1. Select Menu > AT&T Musi
Music Player.
Advanced Mode - Multim
2. Select Settings > Remove.3. Select License Data File or All
Music Contents.4. Select Select > Yes.
Media player
Backgroundskin
Icon Descriptions
Volume level 7
Pause
Play
Rewind with long press
3. Before playing a video clipselect Options to access followings: Send, RenameMultiple Select, Delete,Delete All, Copy to ExterMemor Move to Extern
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
72/105
138
Media playerYou can play video clips with themedia player.note:Do not use this feature illegally.
Sound and video can be protected by
copyright. It is illegal to copy such sound
/ video tracks for the purpose of sellingor distribution. Pantech does not in any
way support the unauthorized use of
content on your phone media player.
Playing timeVolume
controls
DurationPlayercontrols
Volumecontrols
Playing time
Playercontrols
Videoimage
Duration
Rewind with long press
Fast Forward with long press
Previous track with short
press
Next track with short press
Repeat on
Repeat off
Playing the video clip1. Select Menu > My Stuff > Tools
> Media Player > Video.2. Select a le > Play.
Memory, Move to ExternMemory, Properties or Vby Grid.
Playing the audio le1. Select Menu > My Stuff > T
> Media Player > Audio.2. Select a le or select a foldthen a le.
3. Select Play.For details on audio playercontols, see page 130.
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
73/105
Shopping Games1. Select Menu > My Stuff >
Games > Shop Games.
Shopping Wallpapers1. Select Menu > My Stuff >
4
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
74/105
142
Picture > Shop Wallpapers.
Shopping Videos1. Select Menu > My Stuff >
Video > Shop Videos.
Shopping Music1. Select Menu > AT&T Music >
Shop Music.
CaAlar
Pill Re
UseCal
Tip calStop
Notepad and voiceWorCo
Say a comReadou
Useful Featwith Advanced
4
Advanced Mode - Useful feat
In Advanced Mode, you canutilize all useful features thatP2030 provides.
CalendarCalendar helps
note:You can also access Calendar by
pressingC in standby mode. View by
Month is default setting for Calendar.
In the monthly viewTo Press
2. Select Appointment, Task orNote.
3. Input the event and selectSave.
note:You can create events for dates
from 01/01/2000 to 12/31/2099.
4. Select Save.
Editing existing alarms1. Select Menu>My Stuff>
Tools>Alarm Clock.2. Select an alarm > Edit or s
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
75/105
144
Calendar helpsyou manage yourschedule includingyour time for calls orspecial days. You canset a reminder on any
given date with thisfunction.
Viewing calendar1. Select Menu>My Stuff>
Tools>Calendar.
Move to
another day
L for Previous
R for Next
Move to
another week
U for Previous
D for Next
View other
month
Side key down for
Previous
Side key up for Next
Creating a new event1. Select a day > Options > New
Event.
from 01/01/2000 to 12/31/2099.
Alarm clock
Setting an alarm1. Select Menu>My Stuff>
Tools>Alarm Clock.2. Select Create New for new
alarm.3. Set the Cycle,Time,Alarm
Sound,Alarm Alert Type,Alarm Volume, Snooze andPower Alarm.
Options to access followiCreate New,DeleteandDelete All.
Setting a simple alarm1. Select Menu>My Stuff>
Tools>Alarm Clock.2. Select Simple Alarm and
select Edit.3. Set the alarm schedule an
select Save.
Advanced Mode - Useful feat
Pill ReminderPill Reminder setsyour schedule totake pill, and alarmpop-up will appearon the setting time
For details on taking picture, seepage 122.
3. Input Name andDosage.4. Select Time > Create.5. Set a desired time > OK > Back.6 Select Period > Begins
Checking Today's PillReminder
1. Select Menu >My Stuff > Tools> Pill Reminder> Options >
4. Select Save.
Deleting reminders1. Select Menu > My Stuff > T
> Pill Reminder.2. Select a pill reminder>
O ti D l t D l
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
76/105
146
on the setting time.
You can select toaccept the reminder or have thereminder pop-up again after 15minutes.
Creating a new pill reminder1. Select Menu > My Stuff > Tools> Pill Reminder > Create New.
2. Select Take and then, take apicture.
6. Select Period > Begins.7. Set the beginning time of the
dosage on the calendar.8. Select Reminders and set the
reminding period.
9.SelectDaily, Every 2 days,orMonthly. When selectingEvery 2 days, you can setdesired days for period.
10. Enter more information.11. Select Save.
> Options >Today's Pill.
2. Scroll and select apill reminder item to check thedetail.
Editing a pill reminder1. Select Menu > My Stuff > Tools> Pill Reminder.
2. Select a pill reminder> Edit.3. Edit Name, Dosage, Time,
Period or More Information.
Options > Delete or DeleAll.
User GuideUser Guide helps users to leahow to use the phone easily itself.
1. Select Menu > My Stuff > T> User Guide.
2. Select a function to checkdetail.
Advanced Mode - Useful feat
Calculator1. Select Menu >
My Stuff > Tools >Calculator.
2. Input the numberswith the numeric
Tip calculator1. Select Menu>My
Stuff>Tools>TipCalculator.
2. Enter the valuesfor all the variable
Stop watch1. Select Menu>My
Stuff>Tools>Stop Watch.
2. Select Start tostart
will be indicated by a clock icon. Yo
access the stop watch by re-enteri
the stop watch menu.
Notepad and voicememo
-
7/29/2019 CELL 110621 Revere P2030 Manual en REV.00 Reduced
77/105
148
with the numerickeypad and enterthe operators withL/R/U/D/@to calculate.
3. Press* to use the decimalpoint.
4. PressC to cancel yourinput.
5. Select Reset to reset.
for all the variableelds (Bill($),Tip(%), Split) and then thecorresponding calculationelds (Tip($), Total($),You Pay) are updatedautomatically.
3. Press* to use the decimalpoint.
4. Select Reset to reset.
start.3. Select Stop to stop.4. Select Continue to restart or
select Reset to clear.5. To check split times, select
Mode> Split Time Mode.6. To ch