certificate - hep group...2018/06/24 · certificate number: 88-104674 annex to enec certificate...
TRANSCRIPT
DEKRA Certification B.V.
2 )drs. G.J. Zoetbrood Kate XuManaging Director Certification Manager
© Integral publication of this certificate is allowed
ACCREDITED BY THEDUTCH ACCREDITATIONCOUNCIL
DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem, The NetherlandsT +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Company registration 09085396
CERTIFICATE
Issued to:Applicant:HEP Tech Co. Ltd.20 Jingke 7th RdNantun Dist408 Taichung, Taiwan
Licensee:HEP GmbHRamsloh 1058579 Schalksmühle, Germany
Product : Current controlled LED DriverTrade name(s) : HEP GROUPType(s)/model(s) : LAC120HV900, LAC36HV450, LAC75HV450, LADC120HV900, LADC36HV450
and LADC75HV450
The product and any acceptable variation thereto is specified in the Annex to this certificate and the documents therein referred to.
DEKRA hereby declares that the above-mentioned product has been certified on the basis of:- a type test according to the standard EN 61347-1:2015, EN 61347-2-13:2014,
EN 61347-2-13:2014/A1:2017, EN 62384:2006 and EN 62384:2006/A1:2009- an inspection of the production location according to CENELEC Operational Document CIG 021- a certification agreement with the number 2013493
DEKRA hereby grants the right to use the ENEC certification mark.
The ENEC certification mark may be applied to the product as specified in this certificate for the duration of the ENEC certification agreement and under the conditions of the ENEC certification agreement.
This certificate is issued on 24 June 2018 and expires upon withdrawal of one of the above mentioned standards.
Certificate number: 88-104674
ANNEX TO ENEC CERTIFICATE 88-104674 page 1 of 2
DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem, The NetherlandsT +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Company registration 09085396
SPECIFICATION OF THE CERTIFIED PRODUCT
Product dataProduct : Current controlled LED DriverTrade name(s) : HEP GROUPType(s)/model(s) : LAC120HV900, LAC36HV450, LAC75HV450, LADC120HV900,
LADC36HV450 and LADC75HV450Supply voltage : 220-240 VSupply frequency : 0/50-60 HzAmbient temperature (ta) : -20…+50°C
TESTS
Test requirementsEN 61347-1:2015EN 61347-2-13:2014EN 61347-2-13:2014/A1:2017EN 62384:2006EN 62384:2006/A1:2009
Test resultThe test results are laid down in DEKRA test file 340907000.
Additional informationThe LED controlgear is a built-in LED controlgear for LEDs with constant current. The LED controlgear can be used inside of luminaires. The LADC... LED controlgear is dimmable with DALI. The constant output current is setting by a resistor (LEDset). The insulation between primary and secondary circuit is non-insulated. The insulation between DALI and primary and secondary circuit is basis insulated. The insulation between primary, secondary and DALI circuit to the enclosure is basic insulated. The controlgear has screwless terminal. The max. enclosure temperature under abnormal or fault conditions is 110°C.
The list of components is laid down at test report 3409070.50.
ConclusionThe examination proved that all requirements were met.
Factory locationsHEP GmbHRamsloh 1058579 Schalksmühle, Germany
Weisen Electronic Co. Ltd.Sanzao Ind. Park of ZhuhaiZhuhai CityGuangdong Province, China
ANNEX TO ENEC CERTIFICATE 88-104674 page 2 of 2
DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem, The NetherlandsT +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Company registration 09085396
Types: LAC36HV450, LADC36HV450:In= 175 mA; PF= 0,95; Urange= 50–115 Vdc; Uout= 160 Vdc; Irated= 120–450 mA; Prated= 6–36 W; tc= 70 °C
Types: LAC75HV450, LADC75HV450:In= 370 mA; PF= 0,95; Urange= 100–215 Vdc; Uout= 250 Vdc; Irated= 120–450 mA; Prated= 12–75 W; tc= 85 °C
Types: LAC120HV900, LADC120HV900:In= 585 mA; PF= 0,95; Urange= 100–210 Vdc; Uout= 250 Vdc; Irated= 240–900 mA; Prated= 40–120 W; tc= 80 °C