che 408 and 400 grading
DESCRIPTION
Grading system of Undergrad thesis and design courses of Chemical Engineering department of BUET.TRANSCRIPT
ChE 408: Report, Presentation and Grading1. Breakdown of Work and Report ContentTerm 1
Definition of the Project (2%) Selection of the process and process description (8%) Design basis (2%) PBD and PFD (7%) Material and energy balance (8% and 4%) Water, steam, power and effluent balance (12%)
Interim reportTerm 2
Equipment list and sizing of equipment (18%) Mechanical design and P&ID of a major piece of equipment (13%) Plot plan and equipment layout (2%) Economic analysis (11%)
Final report and presentation (17%)
2. Final presentation content Final presentation duration 6-7 minutes (6 to 10 slides) Content of presentation
Definition Process selection PFD Individual equipment
▪ Mechanical design▪ Mechanical Drawing and P& I Diagram
Plot plan and Plant layout Economic analysis
3. Each group will fill in and submit the following table with final report and show this to viva board
Project tile: Supervisor:
St No Name Individual work load Individual equipmentdesign
Signature
1 XX Project definition, process description Distillation column
2 YY PBD and PFD, plot plan Reactor
3 ZZ Material and Energy balance Evaporator
4 PP Equipment sizing and economic analysis Pressure Swing Adsorber
4. Marks Distribution Attendance and performance in the assigned classes routinely (15%) Initiative +Efforts (15%) Your own contribution to the work (20%) Goals achieved + Final report (35%) Formal presentation and viva (15%)
5. Suggested Grade Sheet of ChE 408: to be Prepared by Supervisors
St ID Name Meeting & Assignment
(15%)
Initiative(15%)
Individual work (20%)
Report(35%)
Viva (15%) Total(100%)
Suggested Grade Sheet of ChE 400: to be Prepared by Supervisors
St ID Name Meeting & Assignment
(10%)
Initiative(20%)
Individual work (20%)
Report(30%)
Goals Achieved
(10%)
Viva (10%)
Total(100%)