Chimney Balloons – Accessories for InstallationThere are a number of things that have more sense in installing a chimney Balloon in your home. The Installation of Chimney Balloon is not complex - it installed in few minutes and no special tools are obligatory. Chimney Balloons can be reused over and over. Remember one thing, deflate chimney Balloon, when it is not coming in use. It is making by a heat-reactive material. The Chimney Balloons provides a simple way cost-effective manner to stop chimney draughts, reduce heat loss and noise in your home.

Inflation Tube

Well the chimney balloon is installed in flue of your chimney that is generally about 2 foot up from your fireplace. When installing you need to put the balloon in place before inflating. With most chimneys this feat is practically impossible because the fireplace is simply too narrow to access. This 18 Inch inflation tube is necessary for the installation process of chimney balloon. Inflation tube is recommended to fully inflate the balloon.

Extended Handgrip

Extended Handgrip can be used when chimney flue is difficult to reach or easily place balloon inside the chimney.

Spare Tap

Scrap Tap is using to attach with the bottom of the inflation tube and close off at fireplace level when the chimney balloon is fully inflated.

Bellow Pump 

Bellow pump is simply used for blowing up the chimney balloon manually.