cit212

11
  Assessment Results  Item Feedback Report CCNA Exploration: Accessing the WAN (Version 4.0) - EWAN Chapter 1 Below is the feedback on items for which you did not receive full credit. Some interactive items may not display your response. Subscore: Dom ain Know ledge - Weighted Score  1 At which two layers of the OSI model does a WAN (Choose two.) Correct Response  Your Response Physical Layer Data Link Layer Network Layer Transport Layer Presentation Layer  Application Layer This item references content from the following areas: CCNA Exploration: Accessing the WAN  1.2.1 WAN Technology Overview 2 Which three WAN devices can be found in the cloud? (Choose three.) Correct Response  Your  Response  ATM switches core routers CSU/DSU Ethernet switches Frame Relay switches repeaters

Upload: matthew-hammond

Post on 04-Jun-2018

216 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: CIT212

8/13/2019 CIT212

http://slidepdf.com/reader/full/cit212 1/11

   Assessment Results 

  Item Feedback Report

CCNA Exploration: Accessing the WAN (Version 4.0) - EWAN

Chapter 1

Below is the feedback on items for which you did not receive full credit. Some interactive items may not display yourresponse.

Subscore: Domain Know ledge - Weighted Score

 

1 At which two layers of the OSI model does a (Choose two.)

Correct 

Response 

 Your  

Response 

Physical Layer

Data Link Layer

Network Layer

Transport Layer

Presentation Layer

 Application Layer

This item references content from the followingareas:CCNA Exploration: Accessing the WAN

  1.2.1 WAN Technology Overview

2 Which three WAN devices can be found in the cloud? (Choose t

Correct Response 

 Your  Response 

 ATM switches

core routers

CSU/DSU

Ethernet switches

Frame Relay switches

repeaters

Page 2: CIT212

8/13/2019 CIT212

http://slidepdf.com/reader/full/cit212 2/11

 

This item references content from the followingareas:CCNA Exploration: Accessing the WAN

  1.2.1 WAN Technology Overview

3 Which networking device is typically used to concentratethe dial-in and dial-out traffic of multiple users to and froma network?

Correct Response 

 Your  Response 

core router

access server

Frame Relay switch

 ATM switch

This item references content from the followingareas:CCNA Exploration: Accessing the WAN

  1.2.2 WAN Physical Layer Concepts

4 Which packet-switched WAN technology offers high-bandwidth connectivity capable of managing data, voice,and video all on the same infrastructure?

Correct Response 

 Your  Response 

Time Division Multiplexing (TDM)

metro Ethernet

Integrated Services Digital Network (ISDN)

Public Switched Telephone Network (PSTN)

This item references content from the followingareas:CCNA Exploration: Accessing the WAN

Page 3: CIT212

8/13/2019 CIT212

http://slidepdf.com/reader/full/cit212 3/11

  1.3.5 Internet Connection Options

5 Which two features are identified with Frame Relayconnections? (Choose two.)

Correct Response 

 Your  Response 

53-byte cells

DLCI

DSLAM

PVC

SPID

This item references content from the following areas:CCNA Exploration: Accessing the WAN

  1.3.4 Packet Swtiched Connection Options

6 Which WAN technology uses a fixed payload of 48 bytesand is transported across both switched and permanent

virtual circuits?Correct Response 

 Your  Response 

 ATM

ISDN

Frame Relay

metro Ethernet

This item references content from the following areas:

CCNA Exploration: Accessing the WAN

  1.3.4 Packet Swtiched Connection Options

7 What are two advantages of an analog PSTN WANconnection? (Choose two.)

Page 4: CIT212

8/13/2019 CIT212

http://slidepdf.com/reader/full/cit212 4/11

Correct Response 

 Your  Response 

low cost

availability

traffic encryption

available bandwidth

support for voice and video

This item references content from the following areas:CCNA Exploration: Accessing the WAN

  1.3.3 Circuit Switched Connection Options

8 What three terms are associated with ISDN PRI?(Choose three.)

Correct Response 

 Your  Response 

cell

DLCI

circuit switching

packet switching

data bearer channels

time-division multiplexing

This item references content from the following areas:CCNA Exploration: Accessing the WAN

  1.3.3 Circuit Switched Connection Options

9 What can cause a reduction in available bandwidth on acable broadband connection?

Correct Response 

 Your  Response 

smaller cells

number of subscribers

committed information rate

Page 5: CIT212

8/13/2019 CIT212

http://slidepdf.com/reader/full/cit212 5/11

 distance from the central office of the provider

This item references content from the followingareas:CCNA Exploration: Accessing the WAN

  1.3.5 Internet Connection Options

10 What type of connectivity is established when VPNs areused from the remote site to the private network?

Correct Response 

 Your  Response 

PVCs

DLCIs

tunnels

dedicated Layer 2 links

This item references content from the followingareas:CCNA Exploration: Accessing the WAN

  1.3.5 Internet Connection Options

11 A U.S. company requires a WAN connection used only totransfer sales data from individual stores to the homeoffice. All transfers will occur after business hours. Therequired bandwidth for this connection is estimated to beless than 38 kbps. Which type of connection requires theleast investment for this company?

Correct Response 

 Your  Response 

 ATM

ISDN

analog dialup

T1 Leased Line

This item references content from the following areas:

Page 6: CIT212

8/13/2019 CIT212

http://slidepdf.com/reader/full/cit212 6/11

CCNA Exploration: Accessing the WAN

  1.3.3 Circuit Switched Connection Options

12 For digital lines, which device is used to establish thecommunications link between the customer equipmentand the local loop?

Correct Response 

 Your  Response 

CSU/DSU

Frame Relay switch

ISDN switch

modem

PBX switch

This item references content from the followingareas:CCNA Exploration: Accessing the WAN

  1.2.2 WAN Physical Layer Concepts

13 Which term describes a device that will put data on thelocal loop?

Correct Response 

 Your  Response 

DLCI

DTE

DCE

BRI

PRI

This item references content from the followingareas:CCNA Exploration: Accessing the WAN

  1.2.2 WAN Physical Layer Concepts

Page 7: CIT212

8/13/2019 CIT212

http://slidepdf.com/reader/full/cit212 7/11

 

14 Which switching type will allow the communication devicesin the provider network to be shared and only allocated toan individual subscriber during data transfer?

Correct 

Response 

 Your  

Response 

circuit-switched

dedicated switched lines

frame-switched

packet-switched

This item references content from the followingareas:CCNA Exploration: Accessing the WAN

  1.2.4 WAN Switching Concepts

15 A company needs a WAN connection that is capable oftransferring voice, video, and data at a minimum data rateof 155 Mbps. Which WAN connection is the best choice?

Correct Response 

 Your  Response 

X.25

DSL

 ATM

ISDN BRI

ISDN PRI

This item references content from the following areas:CCNA Exploration: Accessing the WAN

  1.3.4 Packet Swtiched Connection Options

16 Which two devices are commonly used as datacommunications equipment? (Choose two.)

Correct Response 

 Your  Response 

Page 8: CIT212

8/13/2019 CIT212

http://slidepdf.com/reader/full/cit212 8/11

 

modem

router

CSU/DSU

ISDN switch

Ethernet switch

This item references content from the followingareas:CCNA Exploration: Accessing the WAN

  1.2.2 WAN Physical Layer Concepts

17 Which statement is true of the functionality of the layers inthe hierarchical network model?

Correct Response 

 Your  Response 

The purpose of the access layer is to provide very high bandwidthcommunications between network devices.

Most security screening to prevent unauthorized entry to the networkhappens at the core layer.

Untrusted external connections are segmented from the rest of thenetwork at all three levels.

The distribution layer aggregates WAN connections at the edge ofthe campus.

This item references content from the followingareas:CCNA Exploration: Accessing the WAN

  1.1.3 The Evolving Network Model

18 Which statement is true about data connectivity between acustomer and a service provider?

Correct Response 

 Your  Response 

Normally the CSU/DSU is the designated demarcation point for theservice provider but not the customer.

The segment between the demarcation point and the central office isknown as the "last mile."

Page 9: CIT212

8/13/2019 CIT212

http://slidepdf.com/reader/full/cit212 9/11

 The local loop is the segment between the CSU/DSU and the serial

port on a router.

Putting data on the local loop is the responsibility of the DTE.

This item references content from the followingareas:CCNA Exploration: Accessing the WAN

  1.2.2 WAN Physical Layer Concepts

19 Which statement is true about the differences between aWAN and a LAN?

Correct Response 

 Your  Response 

WANs generally support higher bandwidth than LANs support.

 A WAN link typically traverses shorter geographic distances than aLAN link traverses.

 A WAN often relies on the services of carriers, such as telephone orcable companies, but a LAN does not.

 All WAN implementations generally use the same Layer 2 protocolbut there are many accepted LAN Layer 2 protocols in use.

This item references content from the following areas:

CCNA Exploration: Accessing the WAN

  1.1.1 Introducing Wide Area Networks (WANs)

20 Why is the call setup time of a circuit-switched WANimplementation considered a drawback?

Correct Response 

 Your  Response 

Routing protocols are incompatible with this function.

It restricts the communication sent to voice traffic only.

 A telephone must be used to initially start transferring data.

Data cannot be transferred until a circuit has been established.

This item references content from the followingareas:

Page 10: CIT212

8/13/2019 CIT212

http://slidepdf.com/reader/full/cit212 10/11

CCNA Exploration: Accessing the WAN

  1.2.4 WAN Switching Concepts

21 Which statement about WAN protocols is correct?

Correct Response 

 Your  Response 

 ATM differs from other WAN protocols in that it uses variably sizedpackets.

Most WAN protocols use HDLC or a variant of HDLC as a framingmechanism.

The frame header consists of the frame check sequence and cyclicredundancy check.

ISDN differs from Frame Relay, HDLC, and ATM in that it is packet-switched rather than circuit-switched technology.

This item references content from the followingareas:CCNA Exploration: Accessing the WAN

  1.2.3 WAN Data Link Layer Concepts

22 What is an advantage of packet-switched technology over

circuit-switched technology?

Correct Response 

 Your  Response 

Packet-switched networks are less susceptible to jitter than circuit-switched networks are.

Packet-switched networks can efficiently use multiple routes inside aservice provider network.

Packet-switched networks do not require an expensive permanentconnection to each endpoint.

Packet-switched networks usually experience lower latency than

circuit-switched networks experience.

This item references content from the following areas:CCNA Exploration: Accessing the WAN

  1.2.4 WAN Switching Concepts

Page 11: CIT212

8/13/2019 CIT212

http://slidepdf.com/reader/full/cit212 11/11