2D analysis - bridge abutment. 2D analysis - rapid drawdown of earth dam including spatial variability.

Classic Limit Equilibrium and Stress-based Methods of Slope AnalysisSVSLOPE® 2D represents the new standard in slope stability analysis. Users can perform classic limit

equilibrium slope analysis of soil or rock slopes by the method of slices or newer stress-based methods.

It has the most comprehensive total set of material

strength models, circular and non-circular search

methods and coupled groundwater analysis options

than anyone else in the industry.

w w w . s o i l v i s i o n . c o m

SIMPLY THE BEST GEOTECHNICAL SLOPESTABILITY PACKAGE ON THE MARKET• 3rd generation 2D analysis

• Easy to use with a more advanced yet intuitive user interface• Recent 10X speed improvement (2017) leaves all other’s claims of

being faster without merit

• More comprehensive search capabilities for slope failuresincluding Entry & Exit, Slope Search, Moving Wedges and FullySpecified slips combined with General Surface, Wedge or Ellipsoid

• Unmatched true Multi-Plane Analysis (MPA™) feature, allowingapplication over large regions considering ellipsoid or compostieellipsoid & fault slips

• Superior circular & non-circular composite fault slip shape options.Faults can be defined by planes or meshes

• Creation of complex 3D models and surface intersections withSVDESIGNER™ conceptual model builder

• Easily generate 3D models from 2D cross-sections or slice 3Dmodels into 2D cross-sections

• Advanced probablistic analysis in 2D (Monte Carlo, Latin Hypercube)and Alternative Point Estimation Method (APEM)

• New and improved Block Searching• Optimization of Critical Slip Surfaces• Kulhawy stress-based analysis* (used with SVSOLID™GT)

• Comprehensive set of more than 20 available material modelsincluding multiple unsaturated, ALM 1/2/3, Anisotropic Strength &Function, Power Curve 2, Frictional-Undrained, Hoek-Brown andMohr-Coulomb Curved Surface Envelope models among many others

• More available options of saturated/unsaturated transient orsteady-state seepage than any other package when coupled withyour choice of SVFLUX™GE, SVFLUX™GT or SVFLUX™WR

• One- or two-way sensitivity analyis allows the generation of acontoured surface of the factor of safety based on the relationshipbetween two input variables

• More comprehensive Interslice Force Function capability includingClipped-Sine, Trapezoidal, Fredlund-Wilson and user-defined

• State-of-the-art report-ready graphical presentation of results thatis the best in the industry with no additional manipulation required

• Heavily benchmarked solver with research dating back to 1993.

• Import Clara/W, Slope/W, Slide, DXF, SHP, ESRI and borehole data

Our award winning limit equilibrium slope stability package continuesto receive significant development effort from our team. The net resultis a number of features which solidify the software’s position as the bestgeotechnical stability package on the market.

Advanced searching methods are implemented to correctly determinethe location of the critical slip surface. Advanced probabilistic analysisor accommodation of spatial variation is possible with the software.SVSLOPE® can be combined with SVFLUX™ to import pore-waterpressures or SVSOLID™ to import soil stress conditions.

All of the analysis modules within SVOFFICE™5 are tightly integratedwith our SVDESIGNER™ conceptual modeling software and thesubsequent abilitiy to represent complex models built from triangulatedsurfaces (TINS) as well as grids.

The team at SoilVision Systems Ltd. represents an advanced group ofgeotechnical engineers and software developers with M.Sc. and Ph.D.degrees and decades of experience which ensures that your modelingwill be successful and reliable. This allows users to be confident thatresults from SVSLOPE® are correct.

SVSLOPE® is currently being used on world-class slope stabilityprojects. Top slope stability industry experts already support the use ofSVSLOPE® as the new standard in slope stability modeling.

soilvision.com • contact@soilvision.com

SVS20171026

© 2015 - 2017 SoilVision Systems Ltd. All rights reserved. SoilVision.com, SoilVision logo, and SVSLOPE are registered trademarks of SoilVision Systems Ltd.SVOFFICE, SVOFFICE 5/GE, SVOFFICE 5/GT, SVOFFICE 5/WR, SVSOILS, SVFLUX, SVSOLID, SVCHEM, SVAIR, SVHEAT, SVDESIGNER and SVCORE are trademarks of SoilVision Systems Ltd.

FlexPDE is a registered trademark of PDE Solutions Inc. FEHM is used under license from Los Alamos National Laboratories.

TechnicalI n f o r m a t i o n

CALCULATION METHODSn Ordinary/Felleniusn Bishop simplifiedn Janbu simplifiedn Corps of Engineers #1n Corps of Engineers #2n Lowe-Karafiathn Spencern Morgenstern-Pricen GLE (Fredlund)n Sarman Kulhawy*n SAFEn Rapid drawdown (Duncan & Wright)n Rapid drawdown (Effective stress + B-bar) • Coupled with SVFLUX™

SOLVERn Highly optimized computation enginen Rapid parallel processingn Metric or Imperial unitsn Peer-reviewedn Heavily benchmarkedn Developed based on research started in 1993

GEOMETRY/MODELINGn Unlimited regionsn Unlimited materialsn Finitie element integrationn Overlapping regionsn Import borehole datan Import regions from DXF filesn Import shape files (SHP)n Import ESRI ASCII grid filesn Import from Slope/W and Sliden Create 3D models using SVDESIGNER™

• Export 2D cross-sections • Advanced surface intersections • Import OBJ, 3DS, DEM, DTM, DXF • Import DAT (TecPlot) • Import ASCII/CSV/XLS • Import ESRI grid

GROUNDWATER COUPLINGn Couple with SVFLUX™GTn Couple with SVFLUX™GEn Couple with SVFLUX™WRn Run B-barn Piezometric linesn Grid of pressure headsn Phreatic correctionn Steady-staten Transient-state (saturated/unsaturated)n Climate

STRESS COUPLINGn Couple with SVSOLID™GT • Allows for more comprehensive Kulhawy

stress-based analysis

INTERSLICE FORCE FUNCTIONSn Constantn Half-sinen Clipped-sinen Trapezoidaln Army Corp of Eng assumption 1 & 2n Lowe-Karafiathn Fredlund-Wilsonn Fully specified

LOADINGn Point loadsn Distributed loads (uniform or variable)n Seismic loads (Spectral Pseudo-Static)

MATERIAL STRENGTH MODELSn Mohr-Coulombn Mohr-Coulomb - curved surface envelopen Undrained strength (Phi = 0)n Undrained strength ration SHANESEPn Depth-dependent undrainedn No strength (water)n Infinite strength (bedrock)n Anisotropic strengthn Anisotropic functionn Barton-Bandisn Shear/Normal functionn Bilinearn Hoek-Brownn Hoek-Brown generalizedn Power-Curve 1 and 2n Frictional-Undrainedn Unsaturated • Phi-b • Vanapalli • Fredlund • Vilar • Khalili • Bao

PROBABILITY METHODSn Monte Carlon Latin Hypercuben Distributions • Normal • Uniform • Triangular • LogNormaln APEMn “Floating” critical slip surfacen 1D spatial variabilityn 2D spatial variability

CIRCULAR SEARCH METHODSn Focus search • Point • Line • Tangentn True Multi-Plane Analysis (MPA™) • Large region application • Ellipsoid • Composite ellipsoid & faultn Grid and tangentn Entry and exitn Auto refine searchn Slope searchn Fully specified

NON-CIRCULAR SEARCH METHODSn Block search • Point • Line • Windown Path searchn Grecon Dynamic programmingn Fully specified segments

SLIP SHAPEn Circularn Non-circularn Composite

SENSITIVITY METHODSn One-way sensitivityn Two-way sensitivity

ADVANCED FEATURESn Excess pore pressuren Slice 3D models to 2D cross-sectionn Comprehensive unsaturated analysisn Unsaturated shear strengthn Tension cracksn Reinforcementn Tension cracksn Anisotropic regionsn Rapid drawdown

SUPPORTSn Active vs passive anchorsn End-anchored boltsn Easily define/edit patternsn Grouted tiebacksn Grouted tiebacks with frictionn Soil nailsn Hong Kong soil nailsn Geotextilesn Piles and Micropilesn Back analysis of support forcen User-defined support model

GENERALn Highly advanced CAD featuresn Easy to use and intuitive user interfacen Optimized menu systemn SVOFFICE™5 Manager (beginner/expert mode)n 64-bit multi-core CPU and multi-threadingn Recent 10X speed improvement (2017)n Compatible with Windows 7, 8, 10n Batch analysisn Extensive QAQC programn Fully-integrated help systemn Unmatched customer supportn Responsive update cyclen Industry-leading graphical representation of results

(fully scaleable/report-ready)

PRICING (USD)

Standard Perpetual (full purchase) $2,895Standard Annual Lease $1,737/year

Professional Perpetual (full purchase) $4,795Professional Annual Lease $2,877/year

Network licensing can be purchased for 150% cost ofpersonal single user licenses.

Exclusive VIP-Upgrade subscription gives you an All-Access Pass to new versions (major updates) and newgeneral feature additions (minor updates),maintenance releases and bug fixes as well as prioritytechnical support. You may enjoy these benefits for aslong as you are a subscriber.

Contact us for a quote or more details...