cleary commercial doors, frames and hardware
DESCRIPTION
The selection of commercial doors, frames and hardware can often be a time consuming and difficult process. CLEARY MILLWORK strives to make the selection process easy on you and your customer while committing to the highest standard of customer service. We serve lumberyards and specialty millwork dealers in New England and New York.TRANSCRIPT
www.clearymillwork.com
COMMERCIAL DOORS, FRAMES AND HARDWARE
www.clearymillwork.com www.clearymillwork.com2
W H Y C H O O S E C L E A R Y F O R C O M M E R C I A L ?
The selection of commercial products can often be a time consuming and
difficult process. CLEARY MILLWORK strives to make the selection process
easy on you and your customer while committing to the highest standard
of customer service. We place emphasis on:
SIZE/COMPLEXITY - We encourage dealers to focus on projects up to 20
door openings with standard hardware applications.
SIMPLICITY - to ease the burden on you and your customer
CONVENIENCE - your one-stop shop for all commercial products
SPEED - delivery of commercial products in a timely manner
CLEARY MILLWORK will be there throughout the entire process. From the
planning stages of your project to the construction process, our dedicated
sales and service staff will be on hand to ensure you receive the highest
quality result.
OuR HISTORY
Cleary Millwork was established in 1939 and became part of the North
Atlantic Corp family when they merged with Martin-NAMCO in 2003. The
combination of these New England wholesale distributors brought years
of experience together. Cleary proudly serves lumberyards and specialty
millwork dealers throughout New England and Eastern New York, providing
them with services and products that are unmatched by the competition.
OuR MISSION
“To provide exceptional products and services to every customer, every time.”
1CHOOSE A FRAME
2CHOOSE A DOOR
SubMIT YOuR ORDER
3CHOOSE DOOR OPTIONS
4CHOOSE HARDWARE
QuOTING/ORDERING STEPS
www.clearymillwork.com www.clearymillwork.com3
Q u O T E / O R D E R F O R M
The following form is a useful tool for gathering complete quoting/ordering information.
CuSTOMER NAME _______________________ CONTACT _______________________ JOb NAME ___________________APPLICATION: r INTERIOR r EXTERIOR
1. FRAMESRough Opening Size: _____________________ Normal Opening Size (ie. 3070): ____________________
WALL TYPE: r Concrete Block r Metal Stud r Wood Stud Other
Finished Wall Thickness _____________________ Frame Depth ____________________
FRAME TYPE (See pg 9): r Masonry r Drywall r Custom (drawing attached)
r Drywall Casing Opening r Masonry Double Egress
CORNER CONSTRuCTION (See pg 4): r Knockdown r Set-up & Welded
ANCHORS (See pg 9): r Wire Masonry r Wood Stud r Metal Stud r Drywall
r Existing Opening with Expansion bolt (Punched & Dimpled)
GAUGE: r 16 (Stock) r Other ____________
FIRE RATING: r B Label 1-1/2 Hour r 20 minutes r non-rated
OPENING: r Single Door r Pair of Doors
STEEL: r Cold Rolled Steel r Galvanized
HANDINGS: r Single
r Double
2. DOORS & 3. DOOR OPTIONSTYPE (See pg 7): r Flush Honeycomb Core r Flush Insulated r Embossed 6-Panel Polystyrene Core r Wood (specify) ______
DESIGN (See pg 7): r Flush r 6-Panel r Vision Lite (specify glass size) r Bottom Louver r Omit Glass
GAUGE: r 18
FIRE LABEL: r B Label 1-1/2 Hour r C Label 45 minutes r 20 minutes r non-rated
OPENING: r Single Door r Pair of Doors
HANDING: r Inswing r Outswing
ASTRAGAL: r WITH Astragal r WITHOuT Astragal
STEEL: r Cold Rolled r Galvanized
4. HARDWARELock Brand: _____________________ LOCK TYPE: r Cylindrical r Deadbolt r Mortise
Lock Function (See pg 10): ______________ Lock Number: ______________ Finish: ___________________
HINGES (See pg 10): r Plain bearing r Plain NRP r ball bearing r ball bearing NRP r Spring Finish: _____________
Door Closer (See pg 11): _______________________ Finish: _________________________
EXIT DEVICE (See pg 10): r Rim Device r Mortise Device r Surface Vertical Rod r Exit Only r Lever Trim Finish: ___________MISC. HARDWARE: r Threshold r Weatherstrip r Surface Bolts/Flush Bolts (pair) Finish: ___________________ r Plush Plate Size: __________ r Pull Plate Size: __________ Finish: __________ r Kickplate Size: __________ Finish: __________
r LHA r RHA
r LH r RH
INSWING
r RHR (LH OUTSWING) r LHR (RH OUTSWING)
OuTSWING
INSWING
r RHRA (LH OUTSWING) r LHRA (RH OUTSWING)
OUTSWING (REVERSE ACTIVE)
QuOTING/ORDERING STEPS
You can also fill out a form online at www.clearymillwork.com
(See pg 10 & 11)
www.clearymillwork.com www.clearymillwork.com4
S T E P 1 : C H O O S E Y O U R F R A M E
MASONRY
DRYWALL
HOLLOW METAL FRAME Interior and Exterior ApplicationIncludes• 16 gauge - galvanized - primed gray
• Reinforced for closer
• Prepped and reinforced for three 4-1/2" square corner hinges and 4-7/8" strike prep
• Non-rated and fire rated Warnock Hersey embossed fire labels
• Assembled welded or knock down
• Handed for left or right swing (must specify - inswing or outswing)
• Anchors (please specify): Masonry, Wood Stud, Metal Stud, Floor, UI Sill, Wire or Existing Opening
• Three rubber silencers
• Will work with block walls, poured walls, metal studs or wood studs for new construction and/or existing construction
THROAT
FRAME DEPTH (varies) 5-3/4" standard
4" HEAD FRAME FACE DIMENSION (BLOCK OPENING)
THROAT
FRAME DEPTH (varies) 5-3/4" standard
2" HEAD FRAME FACE DIMENSION
THROAT(varies)
FRAME DEPTH
2" FACE
HOLLOW METAL FRAME Interior ApplicationIncludes• 16 gauge - cold rolled - primed gray
• Reinforced for closer (optional)
• Prepped and reinforced for three 4-1/2" square corner hinges and 4-7/8" strike prep
• Non-rated and fire rated Warnock Hersey embossed fire labels
• Integral adjustable plumb anchor
• 4 tab interlocking system
• Knock down, ready to install
• Handed for left or right swing (must specify)
• 3 rubber silencers
Other sizes and profiles available special order
UNIVERSAL APPLICATION
DRYWALL APPLICATION
SU FRAMES, 16GA Welded Primed Steel Embossed Warnock Hersey Labeled
Ordered by overall frame depth. Throat Opening = 1" less than overall. Wire anchors and silencers included. Galvanized, "SU" unequal rabbet. For other anchor options see page 9.
Single Width HeightOverall Jamb Depths
4-3/4 5-3/4 6-3/4, 7-3/4 8-3/4
2-0, 2-4, 2-62-8, 2-10, 3-0
6-87-0
3-64-0
6-87-0
Double Width Height 4-3/4 5-3/4 6-3/4, 7-3/4 8-3/4
3-64-0, 5-0, 6-0
6-87-0
STOCK ITEMSSee rough opening chart on page 9.
DRYWALL FRAMES, 16GA Knock Down Primed Steel Embossed Warnock Hersey Labeled
Wall Size/Throat Openings. Silencers included 3-1/2 - 4-7/8 "DU" unequal rabbets. 5-5/8, 6-1/8 & 7-1/4 "DQ" equal rabbets
Single Width HeightWall Size/Throat Openings
3-1/2, 3-3/4, 4-5/8, 4-7/8 5-5/8, 6-1/8 7-1/4
2-0, 2-4, 2-62-8, 2-10, 3-0
6-87-0
3-64-0
6-87-0
Double Width Height 3-1/2, 3-3/4, 4-5/8, 4-7/8 5-5/8, 6-1/8 7-1/4
3-64-0, 5-0, 6-0
6-87-0
STOCK ITEMSSee rough opening chart on page 9.
CASED OPENINGFRAME DEPTH 5-3/4"
WALL SIZE/THROAT
4-5/8" OR 4-7/8"
www.clearymillwork.com www.clearymillwork.com5
S T E P 1 : C H O O S E Y O U R F R A M E
FAST-FRAME
Handicap (ada)Double Slope 4-9/16" and 6-9/16" width
Tile Face 4-1/4" and 6-1/4" widthNote: Not for use on outswing applications
Bumper Outswing 4–9/16" width
HinGEREinFORcEMEnT14-gauge, unique extruded holes provide the strength of a 12-gauge hinge reinforcement
pRiMEd WHiTEGaLVaniZEd STEELGalvanized 20-gauge steel provides superior corrosion resistance, matches our Masonite HD bright white doors, and is an ideal surface for painting
OUTER adJUSTaBLEcLOSURE20-gauge steel2 uprights – 1 header
Ta-1 adJUSTaBLE T-STRiKE1/4" of adjustment allows for ease of field installations for proper door closure
WEaTHERSTRippinGSchlegal foam-filled compression (QEBD500) 90-minute fire rating
®
cLOSURE SpanadJUSTMEnT cHaRTWall Sizes A4-1/2" – 5-1/2" = 1-7/8"5-1/2" – 6-1/2" = 2-7/8"6-1/2" – 7-1/2" = 3-7/8"Wider sizes are available upon request.
1-3/4" STEEL dOORS90 minute fire door entry system hung in steel frame
6 PANEL 90R FLUSH 90R FLUSH 1090R FLUSH 590R 4 PANEL NEW ENGLAND 90R
2 PANEL CAMBER-TOP
2 PANEL SQUARE-TOP
A
pREHUnG adJUSTaBLE STEEL dOOR FRaMESFAST-FRAME’s advanced design adds a new dimension of flexibility and durability to Masonite’s steel entry door line. Developed and manu-factured exclusively for Masonite by TIMELY®, FAST-FRAME features a full 1" of adjustability to accommodate almost any variation in wall construction. This easy-to-install, user-friendly, kerfed steel door framesystem is applicable to a full range of residential and commercial applications—wood or steel stud construction. TIMELY’s expertise in innovating and manufacturing steel door frame components is second to none. FAST-FRAME is engineered to meet the most stringent code requirements including structural, impact and 90 minute fire ratings.
ROUGH OpEninGDOOR SIZE + 1-1/4" width, 1" height with ADA SillDOOR SIZE + 1-1/4" width, 1-1/2" height with Z Sill
SiLLSSTandaRd Z inSWinG SiLLThermally broken – 5-5/8" widthOptional extenders for larger wall sizesNote: Not for use on outswing applications
AAAA
www.clearymillwork.com www.clearymillwork.com6
S T E P 2 : C H O O S E Y O U R D O O R
FLuSH DOORS
aRcHiTEcTURaL GRadEFLUSH 1-3/4" FiRE dOORS
CLEAR bIRCH** BIRCH 5 PLY** OAK** 5 PLY WITH HARDWOOD EDGES
PREFINISHED
20 MINuTEsolid particle
core w/ matching edge
20 MINuTEsolid particle core
w/ oak hardwood edge60 Min birchˆ
90 Minbirchˆ
90 MinOakˆ
6/8
2/6 -- --
2/8 --
3/0 †
7/0
2/4 -- -- -- -- --
2/6 --
2/8 --
3/0 † --
OPTIONS:• Prep for hinges and lock for use with metal frame
• Prehang 20 minute door with 20 minute label in weatherstripped primed frame with Endura Z sill, brass color hinges, 180 primed brickmould. Please note only 20 minute rated doors can be hung in 20 minute frame.
• Prehang 20, 60 or 90 minute door in FAST-FRAME, adjustable steel frame with high dam aluminum sill with thermal break, brass color hinges.
• Prehang above door per our standard interior 1-3/4" prehung specifications.
* Doors are pre-fit in width 3/16" ** Doors are pre-fit in width 3/16" and in height 3/4" ˆ Doors are pre-fit in width 1/8" and in height 3/4" † Also available with 90 minute label
1-3/4" FLuSH DOORS
1-3/4" SOLID CORE MOLDED DOORS 20 MINuTE FIRE RATING
STOCK ITEMS
6 PANEL SMOOTH 4 PANEL 2 PANEL 2 PANEL ROMAN 2 PANEL ARCH 2 PANEL bEADEDdOOR OnLy (Available prepped for use with drywall frame)2/6 x 6/8 -- -- -- -- --2/8 x 6/8 --3/0 x 6/8pREHUnG in WOOd LaBEL FRaME2/6 x 6/8 -- -- -- --2/8 x 6/8 --3/0 x 6/8pREHUnG in REdiFLEx STEEL FRaME2/6 x 6/8 -- -- -- --2/8 x 6/8 --3/0 x 6/8
STOCK ITEMS
www.clearymillwork.com www.clearymillwork.com7
S T E P 2 : C H O O S E Y O U R D O O R
HOLLOW METAL DOORSINTERIOR DOORS
REGEnT/OMEGa, FLUSH 18Ga Honeycomb Core Closer Reinforced/Prime Painted
SiZES:20682468266828682106830683468
3668386840682070247026702870
2107030703470367038704070
• Stock Flush
• All doors 1-3/4" thick
• Doors can be cut down in height or width to accommodate any rough opening at additional charge
• Lead times on custom orders may vary
• Regent / Omega• 18 Gauge / Cold rolled steel• Honeycomb core, Omega non-handed
ULTRa dOOR 18Ga Galvanized Insulated, Polystyrene Core Closer Reinforced/Prime Painted
SiZES:2868, FLUSH2870, FLUSH
3068, FLUSH3070, FLUSH
3668, FLUSH3670, FLUSH
3068, 6 PANEL3070, 6 PANEL
• Non-handed
• Available with 161 Prep (2-1/8" x 2-3/4" cylindrical prep) or 86 Edge Prep (1-1/4 x 8" mortise pocket) add fillers if necessary
• Actual door size 7/32" less than net door size in width and 7/8" less in height
• Other designs available (special order)
EXTERIOR DOORS
• Ultra - 18 Gauge, galvanized and insulated polystyrene core, non-handed
6'8" HEIGHTS 7'0" HEIGHTSA b C D A b C D
CECO* 6-5/8" 37-5/8" 68-5/8" 38-1/16" 6-5/8" 39-5/8" 72-5/8" 42-1/16"AMWELD 7-3/8" 37-5/16" 67-1/4" 39-9/16" 7-3/8" 39-5/16" 71-1/4" 43-9/16"FENSTRA 5-1/8" 35-1/8" 65-1/8" 39-9/16" 5-1/8" 37-1/8" 69-1/8" 43-9/16"REPubLIC 7-3/8" 37-5/16" 67-1/4" 39-9/16" 9-3/8" 39-5/16" 69-1/4" 43-9/16"STEELCRAFT 7-3/8" 37-5/16" 67-1/4" 39-9/16" 7-3/8" 39-5/16" 71-1/4" 43-9/16"PIONEER 4-7/8" 35-1/8" 65-3/8" 41-7/8" 4-7/8" 37-1/8" 69-3/8" 45-7/8"REDIFRAME 8-1/4" 37-3/4" 67-1/4" 40" 8-1/4" 39-3/4" 71-1/4" 44"MESKER 4-7/8" 35-1/8" 65-3/8" 39-9/16" 4-7/8" 37-1/8" 69-3/8" 43-9/16"
HINGE LOCATIONS 1-3/4" DOORS WITH 4-1/2" HINGES
A
B
C
DC/L
*Our stock Ceco hollow metal doors are prefit 7/32" in width and 7/8" in height.Actual hinge and lock bore locations should be field checked. This chart should be used for verification.All dimensions shown are from top of door to top of hinge.Lock measurements shown are from top of door to center line of bore.Frame hinge and lock dimensions are 1/8" greater than door dimensions to allow clearance at header.
www.clearymillwork.com www.clearymillwork.com8
S T E P 3 : C H O O S E Y O U R D O O R O P T I O N S
DOOR OPTIONS
METaL ViSiOnS, anEMOSTaT LO pRO 1/4" Clear or “UL Labeled” Diamond "Safety Wire", Glass Vision
SiZES:10 x 105 x 204 x 253 x 3322 x 30
• Available installed or sold separately for field installation• Safety Wire or ceramic rated glass required in labeled fire doors• Check with local inspector• Fire-lite glass available - special order, lead times may vary• Square pattern wire glass available - special order, lead times vary
LOUVERS Anemostat AFDL - Louver
SiZES:24 x 1824 x 2418 x 12
• Non-rated for 1-3/4" doors.• Fusible link louvers available for labeled doors• Available installed or sold separately for field installation
MiScELLanEOUS“A” Label Flush No Vision Allowed (3 hour) Steel Doors only“B” Label Doors 60 & 90 Minute up to 100 square inches Exposed Glass“C” Label Doors 45 Minute up to 1296 square inches Exposed Glass• Labeled doors must be self closing with positive latching
LITES & LOuVERS
24" x 18"24" x 24"18" x 12"
METaL LOUVERNON-FIRE RATED
FULL LiTEAVAILAbLE IN
NON-RATED GLASS ONLY
10" x 10" LiTEAVAILAbLE IN NON-RATED
& SAFETY WIRE RATED GLASS
5" x 20" LiTE4" x 25" LiTE3" x 33" LiTEAVAILAbLE IN NON-RATED
& FIRE RATED GLASS
COMMERCIAL DOORS FIRE RATING 90 MINUTE
FLUSH OaK 5" x 20" LITE
FLUSH BiRcH 5" x 20" LITE
FLUSH STEEL 10" x 10" LITE
22" x 30" LiTEAVAILAbLE IN NON-RATED
& FIRE RATED GLASS UP TO 45 MINUTE
WOOD LIP MOLDING PROFILE Hardwood Lip Molding for 1/8" or 1/4" glass can be ordered for any size cutout,
glazed or open. Mitered corners. If doors are ordered open, molding is permanently
attached to one side, on the other side molding is tacked for easy removal. Door
cutout is 1/8" over glass dimension. Available for 1-3/8" and 1-3/4" doors. In stock.
Other options available special order. Contact your Cleary Sales Rep.
WOOD bEAD NON-RATED LITE OPTIONS
www.clearymillwork.com www.clearymillwork.com9
METaL ViSiOnS, anEMOSTaT LO pRO 1/4" Clear or “UL Labeled” Diamond "Safety Wire", Glass Vision
SiZES:10 x 105 x 204 x 253 x 3322 x 30
• Available installed or sold separately for field installation• Safety Wire or ceramic rated glass required in labeled fire doors• Check with local inspector• Fire-lite glass available - special order, lead times may vary• Square pattern wire glass available - special order, lead times vary
LOUVERS Anemostat AFDL - Louver
SiZES:24 x 1824 x 2418 x 12
• Non-rated for 1-3/4" doors.• Fusible link louvers available for labeled doors• Available installed or sold separately for field installation
Su FRAME ANCHOR OPTIONS
MASONRY "T" ANCHOR(MTA)
ULSILL(ULA)
WOOD STUD ANCHOR(WSA)
WIRE ANCHORS(STANDARD)
METAL STUD ANCHOR
ExISTINGOPENINGANCHOR
FLOORANCHOR(FFA)
BOLTS - specify size6 required per frame (for existing masonry openings only)
4", 5", 6" sleeve
1-3/4, 2-1/2" shields
4", 5" wood screws
OuTSWING
LEFT HAND REVERSE(RH OUTSWING)
RIGHT HAND REVERSE(LH OUTSWING)
LEFT HAND REVERSE ACTIVE(RH OUTSWING)
RIGHT HAND REVERSE ACTIVE(LH OUTSWING)
COMMERCIAL DOOR HANDINGSINSWING
LEFT HAND RIGHT HAND LEFT HAND ACTIVE RIGHT HAND ACTIVE
OPENING SIZES FOR STEEL FRAMES
BUTTED APPLICATION
MASONRY FRAME ROUGH OpEninG UniT diMEnSiOn
DOOR SIZE HEAD FRAME FACE DIMENSION WIDTH HEIGHT WIDTH HEIGHT
3/0 x 6/8 2" 40-1/4" 82-1/8" 40" 82"3/0 x 7/0 2" 40-1/4" 86-1/8" 40" 86"3/0 x 7/0 4" 40-1/4" 88-1/8" 40" 88"
DRYWALL FRAME
SLIP-ON DRYWALL APPLICATION
ROUGH OpEninG
DOOR SIZE WIDTH HEIGHT
2/8 x 6/8 34" 81"3/0 x 6/8 38" 81"3/0 x 7/0 38" 85"6/0 x 6/8 74" 81"6/0 x 7/0 74" 85"
Head and side frame face dimension 2".
Masonry Rough Opening Door width + 4-1/4"Door height + 2-1/8" for 2" headDoor height + 4-1/8" for 4" head
Drywall Rough Opening Door width + 2"Door height + 1"
Cased Rough Opening Door width + 2-3/4"Door height + 1-1/2"
CASED OPENING
www.clearymillwork.com www.clearymillwork.com10
S T E P 4 : C H O O S E Y O U R H A R D WA R E
A. HANG THE DOOR
B. SECURE THE DOOR ALL STOCKED WITH SCHLAGE CLASSIC "C-KEYWAY"
HaGER HinGES 4-1/2" x 4-1/2" SqUaRE cORnER uSP US26D US3 US41279 (INTERIOR)BB1279 (INTERIOR)BB1279 - NRP (INTERIOR) -- --
1250 SPRING (INTERIOR)BB1168 HEAVYWEIGHT (INTERIOR) -- -- --
BB1191-NRP (ExTERIOR) -- --
BB1199 - NRP HEAVYWEIGHT (ExTERIOR) -- -- --
BaLL BEaRinG HinGE
4-1/2" x 4-1/2"
nRp BaLL BEaRinG HinGE
4-1/2" x 4-1/2"
HinGE SpRinG
4-1/2" x 4-1/2"
STOREROOMOutside lever always locked. Inside lever always active.
EnTRyOutside lever locked by inside push button. Unlocked by turning inside lever or key in exterior. Inside lever always active. If button is pushed and turned 90°, outside lever will remain locked
SinGLE cyLindER dEadBOLTKey by Thumbturn.
LiGHT TRaFFic RiM panic BaR
22EO - NON RATED22EOF - FIRE RATED
689 ALUMINUM PAINTED
HEaVy TRaFFic RiM panic BaR
99EO - NON RATED99EOF - FIRE RATED
630 SATIN STAINLESS STEEL
LiGHT & HEaVy TRaFFic VERTicaL panic BaR
630 SATIN STAINLESS STEEL(SPECIAL ORDER)
LEVER W/EScUTcHEOn
ExTERiOR TRiM230L - 626 SATIN CHROME
uSE WITH 22
STOCK ITEMS
LEVER W/EScUTcHEOn
ExTERiOR TRiM996L - 626 SATIN CHROME
USE WITH 99
FUncTiOn STandaRd dUTy ExTRa HEaVy dUTy
FALCON SCHLAGE SCHLAGE
W101
DANE
AL10S
SATuRN
ND10S
RHODES
W301
DANE
AL40S
SATuRN
ND40S
RHODES
W511
DANE
AL53PD
SATuRN
ND53PD
RHODES
W561
DANE
AL70PD
SATuRN
ND70PD
RHODES
W581
DANE
AL80PD
SATuRN
ND80PD
RHODES
-- B560 --
pRiVacyOutside lever locked by inside push button. Inside lever always active. Unblocked by turning inside lever or emergency key in exterior.
paSSaGEBoth levers always active
cLaSSROOMOutside knob/lever locked and unlocked by key. Inside knob/lever always unlocked.
www.clearymillwork.com www.clearymillwork.com11
S T E P 4 : C H O O S E Y O U R H A R D WA R E
C. CONTROL THE DOOR
D. PROTECT THE DOOR
E. SEAL THE DOOR
aSTRaGaLBS596
FOR uSE WITH DOubLE DOORS
HEaVy dUTy SWEEp
WEaTHERSTRipS, SWEEpS and aSTRaGaLDS075 WEATHERSTRIP NEOPRENE SET 3070 & 6070
AVI SWEEP VINYL 3-0 & 4-0
5/8" BRUSH SWEEP 3-0 & 4-0
BS596 AL BRUSH ASTRAGAL SET SET 14 L.F.
aLUMinUM THRESHOLdSAT500 5" FLAT - 1/4" RISE
AT599 3/8" LIP
AT600 5" FLAT - 1/2" RISE
AT601 6" FLAT - 1/2" RISE
AT701 7" FLAT - 1/2" RISE
AT801 8" FLAT - 1/2" RISE
LiGHT dUTy dOOR cLOSERHAGER 5300
MEdiUM dUTy dOOR cLOSERLCN P1461 AND LCN P1461 - HCUSHNORTON 8501 AND NORTON 8501HO
HEaVy dUTy dOOR cLOSERLCN 4041xP AND LCN 4041xP - HCUSHNORTON 7501 AND NORTON 7501HO
Closer includes hardware pack for regular arm, top jamb mounting, parallel arm and holder/stop arm installation.
THRESHOLdADA COMPLIANT
WITH THERMAL BREAK
pUSH pLaTE315PP3-1/2" x 15"
pULL pLaTE315PUP3-1/2" x 15"
MiScELLanEOUS HaRdWaREFLuSHbOLT 358D 26D WOOD DOOR, IVES
FLuSHbOLT 458 (26D) IVES
LOCK GUARD 322 (32D) ROCKWOOD
SuRFACE bOLT 453 (F26) IVES
DOME STOP 441 COMBO CARPET OR TILE (PA28 OR US3)
WALL STOP 406 (PA28 or US3) DOME, ROCKWOOD
WALL STOP 409 (PA28 or US3) CONCAVE, ROCKWOOD
CRASH STOP 115-30-1/2" (26D) CHAIN, IVES
dOOR ViEWERVIEWER4698B
dOME STOp441CU
WaLL STOp409
ROcKWOOd FLaT GOOdS3-1/2 x 15 PuSH PLATE
3-1/2 x 15 W/8" PULL PuLL PLATE, bARRIER FREE
8 x 28 KICKPLATE
8 x 30 KICKPLATE
8 x 34 KICKPLATE
KicK pLaTE 828KP - 8" x 28", 830KP - 8" x 30", 834KP - 8" x 34"
WEaTHERSTRipDS075
THRESHOLdADA COMPLIANT
NON-THERMAL BREAK
REGULAR ARM MOUNT
PARALLEL ARM MOUNT
TOP jAMB ARM MOUNT
HOLDER/STOP ARM MOUNT
1255B Grand Army Highway | Somerset, MA 02726phone 800-899-4533 fax 508-235-4431
235 Dividend Road | Rocky Hill, CT 06067phone 800-486-7600 fax 800-486-0513
120 Defreest Drive, Suite 19 (Rensselaer Technology Park)Troy, NY 12180
phone 800-350-0448 fax 518-861-5061
www.clearymillwork.com5/2014