Clima-Tech CaseThe first "portable climate controlled" case specifically designed for EMS.

OWNERS MANUAL & WARRANTY INFORMATION

Clima-Tech Case

Presentation Overview• Getting Started

• Adjusting Internal Temperature

• Ambient Air Reading

• Smart Sensor

• Power & Performance Analysis

• Settings Screen

• Control Panel Review

• IMPORTANT Safety Information

• Clima-Tech Case Warranty Information

•Thomas EMS Company Information

GETTING STARTEDPlugging it in.

On/Off SwitchPower Plug In

Plug the unit in using either 110 or 12V power.

ADJUSTING TEMPERATURE

NOTE: When the Clima-Tech Case is turned on, itwill begin cooling (orwarming) to the factory setdefault temperature of 65degrees F. The defaulttemperature can beadjusted by the end user.

To adjust temperature,simultaneously hold downthe pre-set button andpush desired temperaturebutton either higher orlower.

NOTE: Your Clima-TechCase will maintain yourdesired temperature+/- 1.5 degrees toapproximately 30 degreesoff surroundingtemperature.

Control Panel Display

AMBIENT AIR READING

The Clima-Tech Case willtake a continuous readingof the surrounding airtemperatures.

Pressing the AMBIENTbutton on the controlpanel will display theambient air temperature.

Control Panel Display

SMART SENSOR

Your Clima-Tech Case is equippedwith a smart sensor that will determinethe difference between the interior andexterior air temperatures and adjustthe internal temperature accordingly.

If the case is taken into a warmer orcolder environment, the smart sensorwill automatically sense the change inthe exterior air temperature and turnon at 25% power to compensate forthe exterior air temperature change.

POWER & PERFORMANCE ANALYSIS

The Clima-Tech Case isequipped with a diagnosticscreen that will allow you tosee incoming voltage.

To access this screen, pushthe “UP” and “DOWN” arrowssimultaneously and thedisplay will switch todiagnostic mode.

This screen displaysimportant data such as theunloaded and loaded powercurrently being delivered tothe case, heat sinktemperature as well ascurrent case activity mode(cooling, heating or idol).

SETTINGS SCREEN

To access the settingsscreen, press the “BatteryLevel” button. The screenallows the end user to togglethe case between Celsiusand Fahrenheit and to adjustthe factory pre-settemperature.

It also allows the end user toset a minimum powerthreshold limit, whereby thecase will turn itself off if thevehicle’s battery drops belowthe set level.

The minimum powerthreshold limit prevents thevehicle’s battery from beingdrained too low, therebyensuring that there is alwaysenough battery power to startthe vehicle.

To change any of thesesettings in the diagnosticscreen, press the AMBIENTor PRESET button to togglebetween lines. Press the UPor Down arrows to adjustthese settings to desiredpreferences.

CONTROL PANEL REVIEWMain Panel

Internal Chamber Temperature

Or Ambient Air Temperature

Or % of Battery Charge

When pressed Indicates Ambient Air Temp

Adjust the internal chamber temperature byholding down the PRESET button and pressingeither the UP or DOWN arrows.

Pressing the AMBIENT and PRESET buttonssimultaneously will access the Settings screen.

Pressing the UP and DOWN buttonssimultaneously will access the Power &Performance screen.

SAFETY INFORMATION

Allow airflow around exterior fan area - blockingairflow will slow cooling or heating.

When operating from a vehicle battery, make sureyou start your engine after 3 to 4 hours of operationto recharge the vehicle battery.

Do not allow moisture to enter exterior fan ports.

Never allow the Clima-Tech Case to be immersedin water or other liquid. This will void the warranty.

To reduce the risk of damage to the DC plug andcord, pull by DC plug rather than cord whendisconnecting.

The Clima-Tech Case is intended for use with a110 volt or 12 volt DC power source that canprovide at least 10 amperes of current. Do notattempt to use with any other power source.

DO NOT operate your Clima-Tech Case in anenclosed space. ALWAYS ensure that there isadequate ventilation and free flow of air around theunit, so that air expelled by the fan is effectivelydissipated.

When operating your Clima-Tech Case in cab ofvehicle, adequate ventilation must be provided byan air conditioning system or window.

Clima-Tech Case WarrantyClima-Tech Case WarrantyThomas EMS, LLC warrants that for a period of 1 (one) year from the date ofpurchase, this product will be free from defects in material and workmanship.Thomas EMS, at its option, will repair or replace this product or anycomponent of the product found to be defective during the warranty period.Replacement will be made with a new or remanufactured product orcomponent.

This warranty does not cover normal wear of parts or damage resulting fromany of the following: negligent use or misuse of the product, use on impropervoltage or current, disassembly, repair or alteration by anyone other thanThomas EMS. Further, the warranty does not cover: Acts of God, such as fire,flood, hurricanes and tornadoes.

Thomas EMS shall not be liable for any damages of any kind resulting fromthe purchase, use or misuse of, or inability to use the product includingincidental, special, consequential or similar damages or loss of profits, or forany breach of contract, fundamental or otherwise, or for any claim broughtagainst purchaser by any other party regardless of their kind and nature.

NON-TRANSFERABLE

COMPANY INFORMATION

Thomas EMSPO Box 651305Salt Lake City, Utah 84165(800) 445-3640 - (801) 265-2516Fax (801) 268-9272Email us @ info@thomasems.comwww.thomasems.com/chillcore.html