coastal douglas-firmdr-h1-52 52 9 7 8 3/4 18 15 1,700 252 mdr-h2-52 52 9 7 8 3/4 19 1/2 15 1,800 296...

LAMINATED POLESengineered to solve problems

Coastal Douglas-firField Raked and Tangent Poles

Company/Customer Name:

Contact Name:

E-Mail Address:

Company Address:

City: State: Zip Code:

Phone Number: Fax Number:

Project Name:

Project Address/Location:

Construction Grade:

Line Voltage(s):

Number of Conductors: Conductor Size/Name(s):

Number of Neutral/Shield Wires: Size/Description(s):

Maximum Weight Span (ft): Maximum Wind Span (ft):

Line Angle or Range of line angles (degrees):

Maximum Line Tension (lb):)

Design Loading Requirements: (NESC Heavy, Grade C, Crossing, etc.)

Pole Height (above groundline):

Lead Length of any Guys:

Soil Type (cohesive/cohesionless):

Soil Shear Strength (psf):

Soil Friction Angle (degrees):

Soil Density (pcf):

Additional Comments:

Fax completed form to 253-627-4188

Note: It is the buyer’s responsibility to verify that the recommended pole(s) meet applica-ble NESC and buyer requirements. McFarland Cascade will make recommendations as to pole size and hardware based on customer-supplied loads, overload factors and soil type.

Design Criteria Submission FormYou can either fax this information to 253-627-4188 or submit your draw-ings and complete this form online at www.mcpoles.com

Please provide sufficient dimensions and loads, or equivalent round-pole class.

To permit us to properly recommend a pole size, please attach a drawing(s) or a sketch as shown below.

Drawing

Sketch

T1

T1T2

T2

T2

T2

T2

T2

DB

AC

G

F

ED

BA

CE

2

Coastal Douglas-Fir | Field Raked Poles | Standard© 2010 McFarland Cascade® | 1-800-426-8430 • www.mclampoles.com

Laminated Pole Property Label

Length [ft]

Default Embedded

Length [ft]

Trans. Tip

Dim. [in]

Long. Tip Dim.

[in]

Trans. Base Dim. [in]

Rake Max. [in]

Approx. Treated Weight

[lb]

Ultimate Groundline

Moment [ft-kips]

MDR-4-32 32 7 1/2 6 6 3/4 9 9 450 69MDR-3-32 32 7 1/2 6 6 3/4 10 1/2 9 550 94MDR-2-32 32 7 1/2 6 6 3/4 12 9 600 123MDR-1-32 32 7 1/2 6 6 3/4 13 1/2 9 650 155MDR-H1-32 32 7 1/2 7 6 3/4 13 1/2 9 650 155MDR-H2-32 32 7 1/2 7 6 3/4 15 9 700 192MDR-H3-32 32 7 1/2 8 6 3/4 16 1/2 9 800 179MDR-H4-32 32 7 1/2 8 8 3/4 16 1/2 9 1,050 232MDR-H5-32 32 7 1/2 9 8 3/4 18 9 1,150 276MDR-H6-32 32 7 1/2 10 8 3/4 19 1/2 9 1,250 323MDR-H7-32 32 7 1/2 10 8 3/4 21 9 1,300 375MDR-H8-32 32 7 1/2 11 8 3/4 22 1/2 9 1,400 431MDR-H9-32 32 7 1/2 12 10 1/4 21 9 1,600 439MDR-H10-32 32 7 1/2 12 10 1/4 22 1/2 9 1,700 504MDR-H11-32 32 7 1/2 12 10 1/4 24 9 1,750 574MDR-H12-32 32 7 1/2 12 10 1/4 25 1/2 9 1,850 648MDR-H13-32 32 7 1/2 13 10 1/4 25 1/2 9 1,900 648MDR-H14-32 32 7 1/2 13 10 1/4 27 9 1,950 726MDR-H15-32 32 7 1/2 14 10 1/4 28 1/2 9 2,100 809MDR-H16-32 32 7 1/2 14 10 1/4 28 1/2 9 2,100 809

MDR-4-37 37 8 6 6 3/4 10 1/2 11 600 92MDR-3-37 37 8 6 6 3/4 12 11 650 120MDR-2-37 37 8 6 6 3/4 12 11 650 120MDR-1-37 37 8 7 6 3/4 13 1/2 11 750 152MDR-H1-37 37 8 7 6 3/4 15 11 800 188MDR-H2-37 37 8 8 6 3/4 18 11 1,000 210MDR-H3-37 37 8 8 8 3/4 16 1/2 11 1,200 228MDR-H4-37 37 8 8 8 3/4 18 11 1,250 272MDR-H5-37 37 8 9 8 3/4 19 1/2 11 1,400 319MDR-H6-37 37 8 10 8 3/4 21 11 1,500 370MDR-H7-37 37 8 10 8 3/4 22 1/2 11 1,600 425MDR-H8-37 37 8 11 8 3/4 24 11 1,700 483MDR-H9-37 37 8 12 8 3/4 25 1/2 11 1,800 545MDR-H10-37 37 8 12 10 1/4 24 11 2,050 566MDR-H11-37 37 8 12 10 1/4 25 1/2 11 2,150 639MDR-H12-37 37 8 13 10 1/4 27 11 2,250 716MDR-H13-37 37 8 13 10 1/4 28 1/2 11 2,350 798MDR-H14-37 37 8 14 10 1/4 30 11 2,500 884MDR-H15-37 37 8 14 10 1/4 30 11 2,500 884MDR-H16-37 37 8 15 10 1/4 31 1/2 11 2,650 975

37 ft. CDF

32 ft. CDFRAKED COASTAL DOUGLAS-FIR

3

Length

DefaultEmbeddedLength

Trans.BaseDim.

Long. Tip Dim.

RakeMax.

Trans.BaseDim.

Trans.TipDim.

Long. Tip Dim.

Line Angle/2

Line Angle/2

Bisect Angle

Foundation Reinforcementas speci�ed

Gro

undl

ine



Length [ft]

Default Embedded

Length [ft]

Trans. Tip

Dim. [in]

Long. Tip Dim.

[in]


Rake Max. [in]


[lb]

Ultimate Groundline

Moment [ft-kips]

MDR-4-42 42 8 6 6 3/4 12 12 750 117MDR-3-42 42 8 7 6 3/4 12 12 800 117MDR-2-42 42 8 7 6 3/4 13 1/2 12 850 149MDR-1-42 42 8 7 6 3/4 15 12 950 184MDR-H1-42 42 8 8 6 3/4 18 12 1,100 207MDR-H2-42 42 8 9 6 3/4 19 1/2 12 1,200 242MDR-H3-42 42 8 9 6 3/4 21 12 1,250 281MDR-H4-42 42 8 9 8 3/4 21 12 1,650 364MDR-H5-42 42 8 9 8 3/4 22 1/2 12 1,750 418MDR-H6-42 42 8 10 8 3/4 24 12 1,850 476MDR-H7-42 42 8 11 8 3/4 25 1/2 12 2,000 537MDR-H8-42 42 8 11 8 3/4 27 12 2,100 602MDR-H9-42 42 8 12 8 3/4 28 1/2 12 2,250 671MDR-H10-42 42 8 12 10 1/4 27 12 2,500 706MDR-H11-42 42 8 13 10 1/4 28 1/2 12 2,650 786MDR-H12-42 42 8 13 10 1/4 30 12 2,750 871MDR-H13-42 42 8 14 10 1/4 31 1/2 12 2,900 946MDR-H14-42 42 8 14 10 1/4 33 12 3,050 1,039MDR-H15-42 42 8 15 10 1/4 33 12 3,100 1,039MDR-H16-42 42 8 15 10 1/4 34 1/2 12 3,200 1,135

MDR-4-47 47 8 1/2 6 8 3/4 12 14 1,100 114MDR-3-47 47 8 1/2 6 8 3/4 13 1/2 14 1,200 144MDR-2-47 47 8 1/2 6 8 3/4 15 14 1,300 178MDR-1-47 47 8 1/2 7 8 3/4 16 1/2 14 1,450 215MDR-H1-47 47 8 1/2 7 8 3/4 18 14 1,550 256MDR--H2-47 47 8 1/2 8 8 3/4 19 1/2 14 1,700 300MDR-H3-47 47 8 1/2 8 8 3/4 21 14 1,800 348MDR-H4-47 47 8 1/2 9 8 3/4 22 1/2 14 1,950 400MDR-H5-47 47 8 1/2 9 8 3/4 24 14 2,050 455MDR-H6-47 47 8 1/2 10 8 3/4 25 1/2 14 2,200 514MDR-H7-47 47 8 1/2 10 8 3/4 27 14 2,300 576MDR-H8-47 47 8 1/2 11 10 1/4 25 1/2 14 2,600 602MDR-H9-47 47 8 1/2 11 10 1/4 27 14 2,750 675MDR-H10-47 47 8 1/2 12 10 1/4 28 1/2 14 2,900 752MDR-H11-47 47 8 1/2 12 10 1/4 30 14 3,050 833MDR-H12-47 47 8 1/2 13 12 1/4 28 1/2 14 3,550 898MDR-H13-47 47 8 1/2 14 12 1/4 30 14 3,750 995MDR-H14-47 47 8 1/2 14 12 1/4 31 1/2 14 3,900 1,080MDR-H15-47 47 8 1/2 15 12 1/4 33 14 4,100 1,186MDR-H16-47 47 8 1/2 15 12 1/4 34 1/2 14 4,250 1,296

47 ft. CDF

42 ft. CDF

4


RAKED COASTAL DOUGLAS-FIR


Length [ft]

Default Embedded

Length [ft]

Trans. Tip

Dim. [in]

Long. Tip Dim.

[in]


Rake Max. [in]


[lb]

Ultimate Groundline

Moment [ft-kips]

MDR-3-52 52 9 6 8 3/4 13 1/2 15 1,300 142MDR-2-52 52 9 7 8 3/4 15 15 1,500 175MDR-1-52 52 9 7 8 3/4 16 1/2 15 1,600 212MDR-H1-52 52 9 7 8 3/4 18 15 1,700 252MDR-H2-52 52 9 7 8 3/4 19 1/2 15 1,800 296MDR-H3-52 52 9 8 10 1/4 19 1/2 15 2,200 346MDR-H4-52 52 9 9 10 1/4 21 15 2,350 402MDR-H5-52 52 9 10 10 1/4 22 1/2 15 2,550 461MDR-H6-52 52 9 11 10 1/4 24 15 2,750 525MDR-H7-52 52 9 12 10 1/4 25 1/2 15 2,950 592MDR-H8-52 52 9 12 10 1/4 27 15 3,100 664MDR-H9-52 52 9 13 12 1/4 25 1/2 15 3,600 708MDR-H10-52 52 9 13 12 1/4 27 15 3,750 794MDR-H11-52 52 9 14 12 1/4 28 1/2 15 4,000 884MDR-H12-52 52 9 14 12 1/4 30 15 4,150 980MDR-H13-52 52 9 15 12 1/4 31 1/2 15 4,350 1,080MDR-H14-52 52 9 15 12 1/4 33 15 4,500 1,186MDR-H15-52 52 9 16 12 1/4 34 1/2 15 4,750 1,296MDR-H16-52 52 9 16 12 1/4 36 15 4,900 1,411

MDR-2-57 57 9 1/2 7 8 3/4 16 1/2 17 1,750 212MDR-1-57 57 9 1/2 7 8 3/4 18 17 1,850 252MDR-H1-57 57 9 1/2 7 8 3/4 19 1/2 17 2,000 296MDR-H2-57 57 9 1/2 7 8 3/4 21 17 2,100 343MDR-H3-57 57 9 1/2 8 10 1/4 21 17 2,550 402MDR-H4-57 57 9 1/2 8 10 1/4 22 1/2 17 2,650 461MDR-H5-57 57 9 1/2 9 10 1/4 24 17 2,900 525MDR-H6-57 57 9 1/2 9 10 1/4 25 1/2 17 3,000 592MDR-H7-57 57 9 1/2 10 10 1/4 27 17 3,250 664MDR-H8-57 57 9 1/2 10 10 1/4 28 1/2 17 3,350 740MDR-H9-57 57 9 1/2 11 12 1/4 27 17 3,950 794MDR-H10-57 57 9 1/2 12 12 1/4 28 1/2 17 4,200 884MDR-H11-57 57 9 1/2 13 12 1/4 30 17 4,450 980MDR-H12-57 57 9 1/2 14 12 1/4 31 1/2 17 4,700 1,080MDR-H13-57 57 9 1/2 15 12 1/4 33 17 4,950 1,186MDR-H14-57 57 9 1/2 15 12 1/4 34 1/2 17 5,100 1,276MDR-H15-57 57 9 1/2 16 12 1/4 36 17 5,350 1,389MDR-H16-57 57 9 1/2 16 12 1/4 37 1/2 17 5,550 1,507

57 ft. CDF

52 ft. CDF

5

Length


Trans.BaseDim.

Long. Tip Dim.

RakeMax.

Trans.BaseDim.

Trans.TipDim.

Long. Tip Dim.

Line Angle/2

Line Angle/2

Bisect Angle


Gro

undl

ine



Length [ft]

Default Embedded

Length [ft]

Trans. Tip

Dim. [in]

Long. Tip Dim.

[in]


Rake Max. [in]


[lb]

Ultimate Groundline

Moment [ft-kips]

MDR-1-62 62 10 7 10 1/4 16 1/2 19 2,200 244MDR-H1-62 62 10 8 10 1/4 18 19 2,450 291MDR-H2-62 62 10 8 10 1/4 19 1/2 19 2,600 341MDR-H3-62 62 10 8 12 1/4 19 1/2 19 3,100 408MDR-H4-62 62 10 9 12 1/4 21 19 3,350 473MDR-H5-62 62 10 10 12 1/4 22 1/2 19 3,650 543MDR-H6-62 62 10 11 12 1/4 24 19 3,900 617MDR-H7-62 62 10 12 12 1/4 25 1/2 19 4,200 697MDR-H8-62 62 10 12 12 1/4 27 19 4,350 781MDR-H9-62 62 10 13 12 1/4 28 1/2 19 4,650 871MDR-H10-62 62 10 13 12 1/4 30 19 4,850 965MDR-H11-62 62 10 14 12 1/4 31 1/2 19 5,100 1,064MDR-H12-62 62 10 14 12 1/4 33 19 5,300 1,167MDR-H13-62 62 10 15 12 1/4 34 1/2 19 5,550 1,276MDR-H14-62 62 10 15 12 1/4 36 19 5,750 1,367MDR-H15-62 62 10 16 12 1/4 37 1/2 19 6,000 1,483MDR-H16-62 62 10 17 12 1/4 39 19 6,300 1,604

MDR-1-67 67 10 1/2 7 12 1/4 16 1/2 20 2,850 292MDR-H1-67 67 10 1/2 7 12 1/4 18 20 3,050 347MDR-H2-67 67 10 1/2 7 12 1/4 19 1/2 20 3,250 408MDR-H3-67 67 10 1/2 8 12 1/4 21 20 3,550 473MDR-H4-67 67 10 1/2 9 12 1/4 22 1/2 20 3,850 543MDR-H5-67 67 10 1/2 10 12 1/4 24 20 4,150 617MDR-H6-67 67 10 1/2 11 12 1/4 25 1/2 20 4,400 697MDR-H7-67 67 10 1/2 12 12 1/4 27 20 4,700 781MDR-H8-67 67 10 1/2 12 12 1/4 28 1/2 20 4,900 871MDR-H9-67 67 10 1/2 13 12 1/4 30 20 5,200 965MDR-H10-67 67 10 1/2 13 12 1/4 31 1/2 20 5,400 1,064MDR-H11-67 67 10 1/2 14 12 1/4 33 20 5,700 1,167MDR-H12-67 67 10 1/2 14 12 1/4 34 1/2 20 5,900 1,235MDR-H13-67 67 10 1/2 15 12 1/4 36 20 6,200 1,345MDR-H14-67 67 10 1/2 15 12 1/4 39 20 6,600 1,579MDR-H15-67 67 10 1/2 16 12 1/4 40 1/2 20 6,900 1,702MDR-H16-67 67 10 1/2 16 12 1/4 42 20 7,100 1,831

67 ft. CDF

62 ft. CDF

6




Length [ft]

Default Embedded

Length [ft]

Trans. Tip

Dim. [in]

Long. Tip Dim.

[in]


Rake Max. [in]


[lb]

Ultimate Groundline

Moment [ft-kips]

MDR-1-72 72 11 7 12 1/4 16 1/2 22 3,050 287MDR-H1-72 72 11 7 12 1/4 19 1/2 22 3,500 401MDR-H2-72 72 11 7 12 1/4 21 22 3,700 465MDR--H3-72 72 11 8 12 1/4 22 1/2 22 4,000 534MDR-H4-72 72 11 9 12 1/4 24 22 4,300 608MDR-H5-72 72 11 10 12 1/4 25 1/2 22 4,650 686MDR-H6-72 72 11 11 12 1/4 27 22 4,950 769MDR-H7-72 72 11 12 12 1/4 28 1/2 22 5,250 857MDR-H8-72 72 11 12 12 1/4 30 22 5,500 949MDR-H9-72 72 11 13 12 1/4 31 1/2 22 5,800 1,047MDR-H10-72 72 11 13 12 1/4 33 22 6,000 1,149MDR-H11-72 72 11 14 12 1/4 34 1/2 22 6,300 1,256MDR-H12-72 72 11 14 12 1/4 37 1/2 22 6,750 1,436MDR-H13-72 72 11 15 12 1/4 39 22 7,050 1,553MDR-H14-72 72 11 15 12 1/4 40 1/2 22 7,300 1,674MDR-H15-72 72 11 16 12 1/4 42 22 7,600 1,801MDR-H16-72 72 11 17 12 1/4 43 1/2 22 7,900 1,932

MDR-1-77 77 11 1/2 7 12 1/4 18 24 3,500 342MDR-H1-77 77 11 1/2 7 12 1/4 19 1/2 24 3,700 401MDR-H2-77 77 11 1/2 7 12 1/4 21 24 3,950 465MDR-H3-77 77 11 1/2 8 12 1/4 22 1/2 24 4,300 534MDR-H4-77 77 11 1/2 9 12 1/4 24 24 4,600 608MDR-H5-77 77 11 1/2 10 12 1/4 27 24 5,200 769MDR-H6-77 77 11 1/2 11 12 1/4 28 1/2 24 5,500 857MDR-H7-77 77 11 1/2 12 12 1/4 30 24 5,850 949MDR-H8-77 77 11 1/2 12 12 1/4 31 1/2 24 6,100 1,047MDR-H9-77 77 11 1/2 13 12 1/4 33 24 6,400 1,149MDR-H10-77 77 11 1/2 13 12 1/4 34 1/2 24 6,650 1,215MDR-H11-77 77 11 1/2 14 12 1/4 36 24 7,000 1,323MDR-H12-77 77 11 1/2 14 12 1/4 39 24 7,450 1,553MDR-H13-77 77 11 1/2 15 12 1/4 40 1/2 24 7,750 1,674MDR-H14-77 77 11 1/2 15 12 1/4 42 24 8,000 1,801MDR-H15-77 77 11 1/2 16 12 1/4 43 1/2 24 8,350 1,932MDR-H16-77 77 11 1/2 16 12 1/4 46 1/2 24 8,800 2,207

77 ft. CDF

72 ft. CDF

7

Length


Trans.BaseDim.

Long. Tip Dim.

RakeMax.

Trans.BaseDim.

Trans.TipDim.

Long. Tip Dim.

Line Angle/2

Line Angle/2

Bisect Angle


Gro

undl

ine



Length [ft]

Default Embedded

Length [ft]

Trans. Tip

Dim. [in]

Long. Tip Dim.

[in]


Rake Max. [in]


[lb]

Ultimate Groundline

Moment [ft-kips]

MDR-1-82 82 12 7 12 1/4 19 1/2 25 3,950 395MDR-H1-82 82 12 7 12 1/4 21 25 4,200 458MDR-H2-82 82 12 7 12 1/4 22 1/2 25 4,450 525MDR-H3-82 82 12 8 12 1/4 24 25 4,800 598MDR-H4-82 82 12 9 12 1/4 25 1/2 25 5,150 675MDR--H5-82 82 12 10 12 1/4 27 25 5,500 757MDR-H6-82 82 12 11 12 1/4 28 1/2 25 5,850 843MDR-H7-82 82 12 12 12 1/4 31 1/2 25 6,450 1,030MDR-H8-82 82 12 12 12 1/4 33 25 6,700 1,130MDR-H9-82 82 12 13 12 1/4 34 1/2 25 7,050 1,235MDR-H10-82 82 12 13 12 1/4 37 1/2 25 7,550 1,412MDR-H11-82 82 12 14 12 1/4 39 25 7,900 1,527MDR-H12-82 82 12 14 12 1/4 40 1/2 25 8,150 1,647MDR-H13-82 82 12 15 12 1/4 42 25 8,500 1,771MDR-H14-82 82 12 15 12 1/4 45 25 9,000 2,033MDR-H15-82 82 12 16 12 1/4 46 1/2 25 9,350 2,171MDR-H16-82 82 12 16 12 1/4 49 1/2 25 9,800 2,452

MDR-1-87 87 12 1/2 7 12 1/4 21 27 4,450 458MDR-H1-87 87 12 1/2 7 12 1/4 22 1/2 27 4,700 525MDR-H2-87 87 12 1/2 7 12 1/4 24 27 4,950 598MDR-H3-87 87 12 1/2 8 12 1/4 25 1/2 27 5,350 675MDR-H4-87 87 12 1/2 9 12 1/4 27 27 5,700 757MDR-H5-87 87 12 1/2 10 12 1/4 28 1/2 27 6,100 843MDR-H6-87 87 12 1/2 11 12 1/4 30 27 6,450 934MDR-H7-87 87 12 1/2 12 12 1/4 31 1/2 27 6,850 1,030MDR-H8-87 87 12 1/2 12 12 1/4 34 1/2 27 7,350 1,235MDR-H9-87 87 12 1/2 13 12 1/4 36 27 7,750 1,301MDR-H10-87 87 12 1/2 13 12 1/4 39 27 8,250 1,527MDR-H11-87 87 12 1/2 14 12 1/4 40 1/2 27 8,650 1,647MDR-H12-87 87 12 1/2 14 12 1/4 42 27 8,900 1,771MDR-H13-87 87 12 1/2 15 12 1/4 43 1/2 27 9,250 1,899MDR-H14-87 87 12 1/2 15 12 1/4 46 1/2 27 9,750 2,171MDR-H15-87 87 12 1/2 16 12 1/4 48 27 10,150 2,313MDR-H16-87 87 12 1/2 17 12 1/4 49 1/2 27 10,550 2,452

87 ft. CDF

82 ft. CDF

8




Length [ft]

Default Embedded

Length [ft]

Trans. Tip

Dim. [in]

Long. Tip Dim.

[in]


Rake Max. [in]


[lb]

Ultimate Groundline

Moment [ft-kips]

MDR-1-92 92 13 7 12 1/4 22 1/2 28 4,950 525MDR-H1-92 92 13 7 12 1/4 24 28 5,250 598MDR-H2-92 92 13 7 12 1/4 25 1/2 28 5,500 675MDR-H3-92 92 13 8 12 1/4 27 28 5,900 757MDR-H4-92 92 13 9 12 1/4 28 1/2 28 6,300 843MDR-H5-92 92 13 10 12 1/4 30 28 6,700 934MDR-H6-92 92 13 11 12 1/4 31 1/2 28 7,100 1,030MDR-H7-92 92 13 12 12 1/4 34 1/2 28 7,800 1,154MDR-H8-92 92 13 12 12 1/4 36 28 8,050 1,257MDR-H9-92 92 13 13 12 1/4 37 1/2 28 8,450 1,364MDR-H10-92 92 13 13 12 1/4 40 1/2 28 9,000 1,591MDR-H11-92 92 13 14 12 1/4 42 28 9,400 1,711MDR-H12-92 92 13 14 12 1/4 45 28 9,900 1,964MDR-H13-92 92 13 15 12 1/4 46 1/2 28 10,300 2,097MDR-H14-92 92 13 15 12 1/4 49 1/2 28 10,850 2,369MDR-H15-92 92 13 16 14 1/4 46 1/2 28 12,150 2,439MDR-H16-92 92 13 16 14 1/4 49 1/2 28 12,800 2,756

MDR-1-97 97 13 1/2 7 12 1/4 22 1/2 30 5,200 517MDR-H1-97 97 13 1/2 7 12 1/4 24 30 5,500 588MDR-H2-97 97 13 1/2 7 12 1/4 25 1/2 30 5,800 664MDR-H3-97 97 13 1/2 8 12 1/4 27 30 6,200 744MDR-H4-97 97 13 1/2 9 12 1/4 30 30 6,900 919MDR-H5-97 97 13 1/2 10 12 1/4 31 1/2 30 7,350 1,013MDR-H6-97 97 13 1/2 11 12 1/4 33 30 7,750 1,112MDR-H7-97 97 13 1/2 12 12 1/4 34.5 30 8,200 1,215MDR-H8-97 97 13 1/2 12 12 1/4 37 1/2 30 8,750 1,364MDR-H9-97 97 13 1/2 13 12 1/4 39 30 9,200 1,475MDR-H10-97 97 13 1/2 13 12 1/4 42 30 9,750 1,711MDR-H11-97 97 13 1/2 14 12 1/4 43 1/2 30 10,150 1,835MDR-H12-97 97 13 1/2 14 12 1/4 46 1/2 30 10,750 2,097MDR-H13-97 97 13 1/2 15 12 1/4 48 30 11,150 2,234MDR-H14-97 97 13 1/2 15 14 1/4 46 1/2 30 12,650 2,439MDR-H15-97 97 13 1/2 16 14 1/4 48 30 13,150 2,599MDR-H16-97 97 13 1/2 17 14 1/4 49 1/2 30 13,650 2,756

97 ft. CDF

92 ft. CDF

9

Length


Trans.BaseDim.

Long. Tip Dim.

RakeMax.

Trans.BaseDim.

Trans.TipDim.

Long. Tip Dim.

Line Angle/2

Line Angle/2

Bisect Angle


Gro

undl

ine



Length [ft]

Default Embedded

Length [ft]

Trans. Tip

Dim. [in]

Long. Tip Dim.

[in]


Rake Max. [in]


[lb]

Ultimate Groundline

Moment [ft-kips]

MDR-1-102 102 14 7 12 1/4 24 32 5,800 588MDR-H1-102 102 14 7 12 1/4 25 1/2 32 6,100 664MDR-H2-102 102 14 7 12 1/4 27 32 6,400 744MDR-H3-102 102 14 8 12 1/4 28 1/2 32 6,800 829MDR-H4-102 102 14 9 12 1/4 30 32 7,250 919MDR-H5-102 102 14 10 12 1/4 31 1/2 32 7,700 1,013MDR-H6-102 102 14 11 12 1/4 34 1/2 32 8,450 1,215MDR-H7-102 102 14 12 12 1/4 36 32 8,900 1,257MDR-H8-102 102 14 12 12 1/4 39 32 9,500 1,475MDR-H9-102 102 14 13 12 1/4 40 1/2 32 9,950 1,591MDR-H10-102 102 14 13 12 1/4 43 1/2 32 10,550 1,835MDR-H11-102 102 14 14 12 1/4 45 32 11,000 1,964MDR-H12-102 102 14 14 12 1/4 48 32 11,550 2,234MDR-H13-102 102 14 15 14 1/4 46 1/2 32 13,300 2,439MDR-H14-102 102 14 15 14 1/4 48 32 13,650 2,599MDR-H15-102 102 14 16 14 1/4 49 1/2 32 14,150 2,756MDR-H16-102 102 14 17 14 1/4 51 32 14,650 2,917

MDR-1-107 107 14 1/2 7 12 1/4 25 1/2 33 6,350 664MDR-H1-107 107 14 1/2 7 12 1/4 27 33 6,700 744MDR-H2-107 107 14 1/2 7 12 1/4 28 1/2 33 7,000 829MDR-H3-107 107 14 1/2 8 12 1/4 30 33 7,450 919MDR--H4-107 107 14 1/2 9 12 1/4 31 1/2 33 7,950 1,013MDR-H5-107 107 14 1/2 10 12 1/4 33 33 8,400 1,112MDR-H6-107 107 14 1/2 11 12 1/4 36 33 9,150 1,235MDR-H7-107 107 14 1/2 12 12 1/4 37 1/2 33 9,650 1,340MDR-H8-107 107 14 1/2 12 12 1/4 40 1/2 33 10,250 1,563MDR-H9-107 107 14 1/2 13 12 1/4 42 33 10,750 1,681MDR-H10-107 107 14 1/2 13 12 1/4 45 33 11,350 1,929MDR-H11-107 107 14 1/2 14 12 1/4 48 33 12,150 2,195MDR-H12-107 107 14 1/2 14 14 1/4 46 1/2 33 13,750 2,396MDR-H13-107 107 14 1/2 15 14 1/4 48 33 14,300 2,554MDR-H14-107 107 14 1/2 15 14 1/4 51 33 15,000 2,865MDR-H15-107 107 14 1/2 16 14 1/4 52 1/2 33 15,550 3,028MDR-H16-107 107 14 1/2 17 14 1/4 54 33 16,100 3,194

107 ft. CDF

102 ft. CDF

10

Coastal Douglas-Fir | Tangent Poles | Standard© 2010 McFarland Cascade® | 1-800-426-8430 • www.mclampoles.com

TANGENT COASTAL DOUGLAS-FIR


Length [ft]

Default Embedded

Length [ft]

Trans. Tip

Dim. [in]

Long. Tip Dim.

[in]

Trans. Base Dim.

[in]


[lb]

Ultimate Groundline

Moment [ft-kips]

MDT-5-30 30 5 5 6 3/4 7 1/2 350 49MDT-4-30 30 5 5 6 3/4 9 400 70MDT-3-30 30 5 6 6 3/4 10 1/2 500 95MDT-2-30 30 5 6 6 3/4 10 1/2 500 95MDT-1-30 30 5 7 6 3/4 12 550 124

30 ft. CDF

35 ft. CDF

MDT-5-45 45 6 1/2 5 6 3/4 10 1/2 700 89MDT-4-45 45 6 1/2 5 6 3/4 12 750 116MDT-3-45 45 6 1/2 6 6 3/4 12 800 116MDT-2-45 45 6 1/2 6 6 3/4 13 1/2 850 147MDT-1-45 45 6 1/2 7 6 3/4 15 1,000 181MDT-H1-45 45 6 1/2 7 6 3/4 18 1,100 222MDT-H2-45 45 6 1/2 7 6 3/4 19 1/2 1,200 260

MDT-5-40 40 6 5 6 3/4 9 550 66MDT-4-40 40 6 5 6 3/4 10 1/2 600 90MDT-3-40 40 6 6 6 3/4 12 700 117MDT-2-40 40 6 6 6 3/4 13 1/2 750 149MDT-1-40 40 6 7 6 3/4 15 850 184

MDT-5-35 35 5 1/2 5 6 3/4 9 500 68MDT-4-35 35 5 1/2 5 6 3/4 10 1/2 550 92MDT-3-35 35 5 1/2 6 6 3/4 10 1/2 550 92MDT-2-35 35 5 1/2 6 6 3/4 12 600 120MDT-1-35 35 5 1/2 7 6 3/4 13 1/2 700 152

MDT-5-50 50 7 5 8 3/4 10 1/2 1,000 95MDT-4-50 50 7 5 8 3/4 12 1,100 124MDT-3-50 50 7 6 8 3/4 13 1/2 1,250 157MDT-2-50 50 7 6 8 3/4 15 1,350 194MDT-1-50 50 7 7 8 3/4 16 1/2 1,500 235MDT-H1-50 50 7 7 8 3/4 18 1,600 280MDT-H2-50 50 7 7 8 3/4 19 1/2 1,700 327

45 ft. CDF

40 ft. CDF

50 ft. CDF

11

Length


Trans.BaseDim.

Long. Tip Dim.

Trans.BaseDim.

Trans.TipDim.

Long. Tip Dim.

Line Angle/2

Line Angle/2

Bisect Angle


Gro

undl

ine



Length [ft]

Default Embedded

Length [ft]

Trans. Tip

Dim. [in]

Long. Tip Dim.

[in]

Trans. Base Dim.

[in]


[lb]

Ultimate Groundline

Moment [ft-kips]

MDT-5-55 55 7 1/2 5 8 3/4 10 1/2 1,100 94MDT-4-55 55 7 1/2 6 8 3/4 12 1,250 123MDT-3-55 55 7 1/2 6 8 3/4 13 1/2 1,350 155MDT-2-55 55 7 1/2 7 8 3/4 15 1,550 191MDT-1-55 55 7 1/2 7 8 3/4 16 1/2 1,650 232MDT-H1-55 55 7 1/2 7 8 3/4 18 1,750 276MDT-H2-55 55 7 1/2 8 8 3/4 19 1/2 1,950 323

55 ft. CDF

60 ft. CDFMDT-3-60 60 8 6 8 3/4 15 1,600 189MDT-2-60 60 8 6 8 3/4 16 1/2 1,750 228MDT-1-60 60 8 7 8 3/4 18 1,950 272MDT-H1-60 60 8 7 8 3/4 19 1/2 2,050 318MDT-H2-60 60 8 7 8 3/4 21 2,200 366MDT-H3-60 60 8 8 8 3/4 22 1/2 2,350 417MDT-H4-60 60 8 8 8 3/4 25 1/2 2,600 529MDT-H5-60 60 8 9 8 3/4 27 2,800 590MDT-H6-60 60 8 10 8 3/4 28 1/2 3,000 654

65 ft. CDFMDT-3-65 65 8 1/2 6 8 3/4 16 1/2 1,900 225MDT-2-65 65 8 1/2 6 8 3/4 18 2,000 268MDT-1-65 65 8 1/2 7 8 3/4 19 1/2 2,200 313MDT-H1-65 65 8 1/2 7 8 3/4 21 2,350 361MDT-H2-65 65 8 1/2 7 8 3/4 22 1/2 2,500 411MDT-H3-65 65 8 1/2 8 8 3/4 25 1/2 2,850 522MDT--H4-65 65 8 1/2 8 8 3/4 27 2,950 582MDT-H5-65 65 8 1/2 9 8 3/4 28 1/2 3,150 645MDT-H6-65 65 8 1/2 10 8 3/4 30 3,350 711

MDT-3-70 70 9 6 8 3/4 16 1/2 2,050 222MDT-2-70 70 9 7 8 3/4 18 2,250 264MDT-1-70 70 9 7 8 3/4 19 1/2 2,400 309MDT-H1-70 70 9 8 8 3/4 21 2,600 356MDT-H2-70 70 9 8 8 3/4 22 1/2 2,750 405MDT-H3-70 70 9 9 10 1/4 24 3,500 537MDT-H4-70 70 9 9 10 1/4 25 1/2 3,650 602MDT-H5-70 70 9 10 10 1/4 27 3,900 671MDT-H6-70 70 9 11 10 1/4 28 1/2 4,150 744

70 ft. CDF

12



80 ft. CDFMDT-3-80 80 10 6 10 1/4 16 1/2 2,700 256MDT-2-80 80 10 7 10 1/4 18 3,000 304MDT-1-80 80 10 7 10 1/4 21 3,400 410MDT-H1-80 80 10 8 10 1/4 22 1/2 3,700 468MDT-H2-80 80 10 8 10 1/4 24 3,850 529MDT-H3-80 80 10 9 10 1/4 25 1/2 4,150 593MDT-H4-80 80 10 9 10 1/4 28 1/2 4,550 733MDT-H5-80 80 10 10 10 1/4 30 4,850 808MDT-H6-80 80 10 11 10 1/4 31 1/2 5,150 886

85 ft. CDFMDT-3-85 85 10 1/2 6 10 1/4 16 1/2 2,900 252MDT-2-85 85 10 1/2 7 10 1/4 18 3,200 300MDT-1-85 85 10 1/2 7 10 1/4 21 3,600 404MDT-H1-85 85 10 1/2 8 10 1/4 22 1/2 3,900 461MDT-H2-85 85 10 1/2 8 10 1/4 25 1/2 4,300 584MDT-H3-85 85 10 1/2 9 10 1/4 28 1/2 4,850 722MDT-H4-85 85 10 1/2 9 10 1/4 30 5,050 796MDT-H5-85 85 10 1/2 10 10 1/4 31 1/2 5,350 873MDT-H6-85 85 10 1/2 11 10 1/4 33 5,650 954

MDT-3-90 90 11 6 10 1/4 18 3,250 300MDT-2-90 90 11 7 10 1/4 21 3,800 404MDT-1-90 90 11 7 10 1/4 22 1/2 4,000 461MDT-H1-90 90 11 8 10 1/4 24 4,350 521MDT-H2-90 90 11 8 10 1/4 25 1/2 4,550 584MDT-H3-90 90 11 9 10 1/4 28 1/2 5,100 722MDT-H4-90 90 11 9 10 1/4 30 5,350 796MDT-H5-90 90 11 10 10 1/4 33 5,850 954MDT-H6-90 90 11 11 10 1/4 34 1/2 6,200 1,038

90 ft. CDF


Length [ft]

Default Embedded

Length [ft]

Trans. Tip

Dim. [in]

Long. Tip Dim.

[in]

Trans. Base Dim.

[in]


[lb]

Ultimate Groundline

Moment [ft-kips]

MDT-3-75 75 9 1/2 6 10 1/4 15 2,350 211MDT-2-75 75 9 1/2 7 10 1/4 16 1/2 2,650 256MDT-1-75 75 9 1/2 7 10 1/4 19 1/2 3,000 356MDT-H1-75 75 9 1/2 8 10 1/4 21 3,250 410MDT-H2-75 75 9 1/2 8 10 1/4 22 1/2 3,450 468MDT-H3-75 75 9 1/2 9 10 1/4 24 3,750 529MDT-H4-75 75 9 1/2 9 10 1/4 27 4,100 661MDT-H5-75 75 9 1/2 10 10 1/4 28 1/2 4,350 733MDT-H6-75 75 9 1/2 11 10 1/4 30 4,650 808

75 ft. CDF

13

Length


Trans.BaseDim.

Long. Tip Dim.

Trans.BaseDim.

Trans.TipDim.

Long. Tip Dim.

Line Angle/2

Line Angle/2

Bisect Angle


Gro

undl

ine


95 ft. CDF

100 ft. CDFMDT-2-100 100 12 7 12 1/4 19 1/2 4,750 407MDT-1-100 100 12 7 12 1/4 21 5,050 468MDT-H1-100 100 12 8 12 1/4 22 1/2 5,500 534MDT-H2-100 100 12 8 12 1/4 25 1/2 6,050 677MDT-H3-100 100 12 9 12 1/4 27 6,500 754MDT-H4-100 100 12 9 12 1/4 30 7,050 922MDT-H5-100 100 12 10 12 1/4 31 1/2 7,500 1,011MDT-H6-100 100 12 11 12 1/4 34 1/2 8,200 1,202

105 ft. CDFMDT-2-105 105 12 1/2 7 12 1/4 19 1/2 5,000 407MDT-1-105 105 12 1/2 7 12 1/4 22 1/2 5,600 534MDT-H1-105 105 12 1/2 8 12 1/4 24 6,050 603MDT--H2-105 105 12 1/2 8 12 1/4 27 6,650 754MDT-H3-105 105 12 1/2 9 12 1/4 28 1/2 7,100 836MDT-H4-105 105 12 1/2 9 12 1/4 31 1/2 7,700 1,011MDT-H5-105 105 12 1/2 10 12 1/4 33 8,150 1,105MDT-H6-105 105 12 1/2 11 12 1/4 34 1/2 8,650 1,202

MDT-2-110 110 13 7 12 1/4 21 5,550 468MDT-1-110 110 13 7 12 1/4 24 6,200 603MDT-H1-110 110 13 8 12 1/4 25 1/2 6,650 677MDT-H2-110 110 13 8 12 1/4 27 6,950 754MDT-H3-110 110 13 9 12 1/4 28 1/2 7,450 836MDT-H4-110 110 13 9 12 1/4 31 1/2 8,100 1,011MDT-H5-110 110 13 10 12 1/4 34 1/2 8,850 1,202MDT-H6-110 110 13 11 12 1/4 36 9,350 1,303

110 ft. CDF


Length [ft]

Default Embedded

Length [ft]

Trans. Tip

Dim. [in]

Long. Tip Dim.

[in]

Trans. Base Dim.

[in]


[lb]

Ultimate Groundline

Moment [ft-kips]

MDT-2-95 95 11 1/2 7 12 1/4 19 1/2 4,550 413MDT-1-95 95 11 1/2 7 12 1/4 21 4,800 475MDT-H1-95 95 11 1/2 8 12 1/4 22 1/2 5,200 542MDT-H2-95 95 11 1/2 8 12 1/4 24 5,500 613MDT-H3-95 95 11 1/2 9 12 1/4 25 1/2 5,900 688MDT-H4-95 95 11 1/2 9 12 1/4 28 1/2 6,450 849MDT-H5-95 95 11 1/2 10 12 1/4 30 6,850 936MDT-H6-95 95 11 1/2 11 12 1/4 33 7,550 1,122

14




Length [ft]

Default Embedded

Length [ft]

Trans. Tip

Dim. [in]

Long. Tip Dim.

[in]

Trans. Base Dim.

[in]


[lb]

Ultimate Groundline

Moment [ft-kips]

MDT-2-115 115 13 1/2 7 12 1/4 22 1/2 6,150 525MDT-1-115 115 13 1/2 7 12 1/4 24 6,450 594MDT--H1-115 115 13 1/2 8 12 1/4 25 1/2 6,950 666MDT-H2-115 115 13 1/2 8 12 1/4 28 1/2 7,600 823MDT-H3-115 115 13 1/2 9 12 1/4 31 1/2 8,450 995MDT-H4-115 115 13 1/2 9 12 1/4 34 1/2 9,050 1,183MDT-H5-115 115 13 1/2 10 12 1/4 36 9,600 1,282MDT-H6-115 115 13 1/2 11 12 1/4 37 1/2 10,100 1,386

120 ft. CDFMDT-2-120 120 14 7 12 1/4 22 1/2 6,400 525MDT-1-120 120 14 7 12 1/4 24 6,750 594MDT-H1-120 120 14 8 12 1/4 25 1/2 7,250 666MDT-H2-120 120 14 8 12 1/4 28 1/2 7,950 823MDT-H3-120 120 14 9 12 1/4 31 1/2 8,800 995MDT-H4-120 120 14 9 12 1/4 34 1/2 9,500 1,183MDT-H5-120 120 14 10 12 1/4 36 10,000 1,282MDT-H6-120 120 14 11 12 1/4 39 10,900 1,493

125 ft. CDFMDT-2-125 125 14 1/2 7 12 1/4 22 1/2 6,650 525MDT-1-125 125 14 1/2 7 12 1/4 25 1/2 7,350 666MDT-H1-125 125 14 1/2 8 12 1/4 28 1/2 8,250 823MDT-H2-125 125 14 1/2 8 12 1/4 31 1/2 9,000 995MDT-H3-125 125 14 1/2 9 12 1/4 33 9,500 1,087MDT-H4-125 125 14 1/2 9 12 1/4 36 10,250 1,282MDT-H5-125 125 14 1/2 10 12 1/4 37 1/2 10,800 1,386MDT-H6-125 125 14 1/2 11 12 1/4 40 1/2 11,700 1,604

MDT-2-130 130 15 7 14 1/4 21 7,600 527MDT-1-130 130 15 7 14 1/4 22 1/2 8,050 601MDT-H1-130 130 15 8 14 1/4 25 1/2 9,150 762MDT-H2-130 130 15 8 14 1/4 27 9,550 850MDT-H3-130 130 15 9 14 1/4 30 10,650 1,038MDT-H4-130 130 15 9 14 1/4 33 11,500 1,244MDT-H5-130 130 15 10 14 1/4 34 1/2 12,200 1,354MDT-H6-130 130 15 11 14 1/4 37 1/2 13,250 1,586

130 ft. CDF

115 ft. CDF

15

Length


Trans.BaseDim.

Long. Tip Dim.

Trans.BaseDim.

Trans.TipDim.

Long. Tip Dim.

Line Angle/2

Line Angle/2

Bisect Angle


Gro

undl

ine


135 ft. CDF


Length [ft]

Default Embedded

Length [ft]

Trans. Tip

Dim. [in]

Long. Tip Dim.

[in]

Trans. Base Dim.

[in]


[lb]

Ultimate Groundline

Moment [ft-kips]

MDT-2-135 135 15 1/2 7 14 1/4 21 7,900 518MDT-1-135 135 15 1/2 7 14 1/4 24 8,800 668MDT-H1-135 135 15 1/2 8 14 1/4 25 1/2 9,500 750MDT-H2-135 135 15 1/2 8 14 1/4 28 1/2 10,400 926MDT-H3-135 135 15 1/2 9 14 1/4 30 11,050 1,021MDT-H4-135 135 15 1/2 9 14 1/4 33 11,950 1,224MDT-H5-135 135 15 1/2 10 14 1/4 36 13,100 1,444MDT-H6-135 135 15 1/2 11 14 1/4 37 1/2 13,750 1,560

16

INSTALLATION OF MCFARLAND CASCADE LAMINATED POLES

Poles are typically predrilled and sized for a specific location, specific equipment and orientation. Because they can look very similar, it is imperative that each pole be matched with the specification and location.

Adequate performance of the foundation system relies on ac-curate descriptions of soil shear strength (cohesive soils), friction angle, density (cohesionless soils) and setting depth. McFarland Cascade will make recommendations based on these factors but it is the responsibility of the owner to accept the final design of the setting depth and foundation requirements.

Culvert or Sleeve

Extra DepthGravelFilled

Example Foundation for Denser Soils

Example Foundation for Soft SoilInstallations

17

LIFTING AND HANDLING

Laminated poles are handled the same way as round wood poles (to minimize corner denting, pad chokers and chains). Poles are marked “BP” at the balance point for ease of lifting and handling

SETTING DEPTH

The setting depths mentioned in this brochure are based on the “standard” or “rule of thumb” (ROT) method of determining setting depth. That method is to add two feet to 10% of pole length for tangent poles and 4 feet to 10% of the pole length for raked poles. Accurate soil data, however, may permit the setting depth to be decreased (thereby saving cost and weight) or, con-versely, require deeper embedment depth or use of a caisson/sleeve for additional support to avoid overturning.

It is the customer’s responsibility to investigate soil conditions and determine the oppropriate setting depth.

FOUNDATION: PASSIVE GROUND RESISTING SYSTEM

Laminated poles are typically narrower than round poles in the loaded direction and, depending on the soils and loads specified, require that the effective width be increased by the addition of load-bearing steel fins. McFarland Cascade will supply fins for the pole based on the loads and soils data supplied or the maximum groundline moment for the pole classification, pole length and setting depth.

RAKE ANGLE

The rake angle of the pole is recommended to be no more than 3% of the above-ground height of the pole as measured from the tip of the uncut side to the base of the pole.

Pole Width

7/8˝ Bolt

Recommended Fin Depth

Rec

omm

ende

d S

e�in

g D

epth

Pole

Dep

th

Lower Fin Length

Fin Width

Upper Fin Length

18

BACKFILL

Backfill is recommended to be crushed stone compacted in 6-inch lifts.

TENSIONING

Once conductors are tensioned to design, wait at least 30 minutes for pole to reach a point of equilibrium and retention to design.

Back Fill

FoundationSystem

Se

ing

Dep

th

Hole Diameter

Field RakeDistance

Cut Side

Uncut Side

Load Direction

Uncut SideCut Side

BisectLineAngle

Rake Direction

Load Direction1/2

Lin

e A

ngle

1/2

Lin

e A

ngle

Cond

ucto

rCo

nduc

tor

Yardstick

19

PRESERVATIVE TREATMENT

All poles are treated to comply with AWPA Specification UC4 and the requirements of AITC 109. Standard treatment is Pentachlo-rophenol (Penta or PCP). Poles may be radial drilled or through-bored from two feet above the groundline to three feet below the groundline or as specified by buyer. CDF poles are incised the full length on all four sides to enhance preservative penetration.

LAMINATING STANDARDS

Poles are manufactured in accordance with AITC 117, APA Y117 and APA Y117 Supplement. Designs are based on Power Line Systems finite element analysis with design stresses determined in accordance with ANSI O5.2 and other recognized sources.

Width

Boring Pa�ern (Do�ed Line)

Groundline

5/16˝ dia. HolesSloped 5 degrees

Pole Top

2-1/2˝ ExclusionZone for TensionLams

2´ -

0˝ (

min

.)

or a

s sp

eci

ed

3´-

0˝ (

min

.)

or a

s sp

eci

ed3˝

5˝

20

A few examples of laminated wood poles in use.

21

Corporate Headquarters: PO Box 1496, Tacoma, WA 98401-1496 Phone: 253-572-3033 • 800-426-8430 • Fax: 253-627-4188

www.mclampoles.com • [email protected]

FLPC1110

coastal douglas-firmdr-h1-52 52 9 7 8 3/4 18 15 1,700 252 mdr-h2-52 52 9 7 8 3/4 19 1/2 15 1,800 296...

Documents