Guangdong Polysil Technology Co.,Ltd广东聚合科技股份有限公司

C o m p a n y P r o f i l e 2 0 1 8

About Us

Curent

Future

• Polysil Group was incorporate in 2009, with register capital approx USD10 million, and locates in Zhongshan New and High Tech Industrial Area. It is a silicone material enterprise covering R&D, production and sales.

• Specializing in the production of high performance silicone materials such as liquid silicone rubber, solid silicone rubber, silicone PSA, silicone release coating, silicone paints and colorants.

• 3 production bases in Zhongshan. The factory covers an area of 40,000 square meters and has 50 professional technicians and more than 400 employees.

• 3 subsidiaries in Zhejiang Yiwu, Jiangsu Wuxi, Fujian Xiamen.

• one new production plant covering 70,000 sqm in Zhejiang Quzhou National Industrial Zone.• Polysil is expected to be listed on the stock market in 2019.

Capacity

40,000 m2 Factory floor space

12000MT•HCR production capacity per year

8000MTLSR production capacity per year

The silicone rubber produced by Polysil is a high performance synthetic rubber. It is widely used in food contact, medical, energy, electronics, power transmission and distribution, automotive, transportation, paint, textile, leather, etc.

R&D

5,000 M2 center area

50+

accomplished and experienced engineers

20+

8

Since its establishment, Polysil has always focused on technological innovation. Polysil has been investing more than USD2,500,000.00 for technology development. The R&D center covers an area of 5,000 square meters, including a synthetic experimental center of 2,500 square meters, and a testing and analysis center of 1,500 square meters. It has a spectrum chamber, a chromatographic chamber, a thermal analysis chamber, a chemical testing room, electrical performance testing room, thixotropic fluid viscosity testing room, material comprehensive performance testing room, etc.

Top ranking R&D center

laboratories

pilot test rooms

Quality Management

Testing Center1800 M220+ experts40+ testing instruments.

Sample Room20 minutes tracking with lot No.

Raw Material TestingEvery lot of raw material is tested before production.Water content, purity, functional group, molecular weight, viscosity, etc.

In-production TestingSemi-product: molecular weight, vinyl, volatile.Finished product: appearance, viscosity/plasticity, physical properties, etc.

Third Party TestingAnnually updated tests by SGS: RoHs, FDA, LFGB, Reach, biocompatibility, etc.

2017• elected as the “Standard Board of Directors of

the 7th Council of China Fluorosilicon Organic Materials Industry Association”

• Received the title of “AAA Credit Enterprise” issued by China Fluorosilicon Organic Materials Industry Association

• Rated as "Guangdong Honesty Demonstration Enterprise"

• Passed the GB/T 29490-2013 intellectual property management system certification

2009• ISO14001 environmental

management system certification

• ISO9001 quality management system certification

Certificates and Rewards

2012• awarded as a high-tech

enterprise

2015• got ISO/TS 16949:2009, the

automotive Industry System Certification

2013• rated as "Guangdong Technology Research

Center"• “Human Resource Management Excellent

Enterprise”

2016• Won the title of "Best Employer of

Zhongshan City"

2018• rated as "China's outstanding enterprise in

the fluorine silicon industry"

POLYSIL Advantages

Product customizationOne-stop customized solutions. Comprehensive analysis of product structure, provide a reasonable material performance program, and tailor the rubber compound according to actual needs to achieve the best process performance.

Polysil can test the physical properties of various silicone materials, RoHS, FDA, LFGB and other items. At the same time, each batch of incoming, semi-finished and finished products will be tested and analyzed to ensure the reliable product quality.

Quality assurance and technology innovation

Top ranking testing center, equipped with most advanced precision testing equipments, and brings together a large number of experienced research elites.

A Professional Custom Silicone Solution Leader

Sales by Regions

·China: Guangdong, Anhui, Beijing, Fujian, Hebei, Henan, Hubei, Hunan, Jilin, Jiangsu, Jiangxi, Mongolia, Shandong, Shanxi, Shanghai, Sichuan, Tianjin, Xi'an, Zhejiang, Chongqing

·Asia: Bangladesh, India, Iran, Japan, Korea, Malaysia, Pakistan, Philippines, Thailand, Taiwan (China), Turkey

·Europe: Germany, Italy, Romania, Russia, Portugal, Britain, France, Poland, Austria, Spain, Czech Republic

·America: Argentina, Brazil, Colombia, Ecuador, Mexico, Canada

·Africa: Morocco, South Africa

Silicone Advantages

·Thermal stability

·High Flexibility

·Resistance to natural ageing

·Good electrical properties

·Comprehensive mechanical properties

·Water Hydrophobicity

·Good fire-resistance

·Biocompatibility / skin contant / food contact

Advantages of silicone

ApplicationsSilicone rubber is widely used in daily life. silicone has been widely used in different areas not only in avaiation, high-end technology and military science as a special material, but also in all aspects of national economy including construction, textile, automotive, machinery, leather, paper makig, metal, paint, medical, etc.

Kitchen WareBaby Feeding

ApplicationsMedical

Home appliance PSA Roller

Applications

Applications

S a n i t a r yAutomotive

Electr ic Tubing

Sports Products

Electronic

Food Contact

Advantages:

Baby Feeding:

extreme transparency, anti bite-tear, fast curing, low VOC, non-post

curing (optional) .

Bake ware:

high tear strength, no smell (platinum curing), low extracts under high

temperature.

Available grades:

LSR

·LIM-9150-XY series

·LIM-9050-XY series

HCR

·HTV-5100-XY series

·HTV-5130-XY series

·HTV-5150-XY series

Applications

Medical

Available grades:

LSR

General parts: MCS-3010-XY

Catheter joint: MCS-3010-51-W

Silicone boning: MCS-3010-40-SB

HCR

Platinum curable: MCH-3150-30-Q (compression molding)

MCH-3031-XY (extrusion molding)

Applications

Advantages:

Platinum curable: easy to operate. Longer material shelf life.

Platinum part B is mixed with silicone before delivery.

Mix platinum part A with the silicone before use.

Silicone bonding: silicone stick with silicone without primer

food garde approval

Advantages:

General purpose: lower density, better anti-yellowing, very stable lot quality

Heat and steam-resistant: Range from 250℃ to 300℃.

Physical property attenuation amplitude, within 30%.

Available grades:

HCR

Genearl purpose: HTV-9930-XY series (compression molding)

HTV-9920-XY series (extrusion molding)

Heat and steam-resistant: HTH-7211-XY series

Applications

Home Applicane

Sports Products

Advantages:

Diving mask: high tranparency, good flowability, fast curing

Swim cap: excellent elongation, easy to demold

low hardness, no oil bleeding

Swim fin: lower density, fast curing,

Available grades:

LSR

Diving mask: LIM-9150-XY series

LIM-9250-XY series (high viscosity)

HCR

Swim cap: HTV-9900-XY series

Swim fin: HTV-9930-XY series

Applications

Electric

Available grades:

LSR

cold shrink: DLS-85XY series

Insulator: DLS-86XY series

Conductive: DLS-83XY series

HCR

cold shrink: DLH-81XY series

elbow joint: DLH-82XY series

Insulator: DLH-86XY series

Conductive: DLH-83XY series

Applications

Advantages:

Cold shrinkable: low long elongation, low deformation, low tension set

Elbow joint: fast curing, good fluitdity, 22kV/mm resistance

Insulator: proven hydrophobicity and hydrophobic mobility,

tracking resistance 1A4.5, maximum 1A6.0

Conductive: volume resistivity from 20-50Ω·cm, possible to be below 10Ω·cm

Electronic

Advantages:

Self adhesive: can stick with thermoplastic elastomers and thermoplastic

like PC, PA, PE, PEI, PBT, GF without primer.

Long lifespan: laptop keyboard with very thin wall rubber dom, lifespan

can be up to 20 million clicks.

Low compression set: as low as 10% (200*12hrs), extremely suitable for

printer roller

Available grades:

LSR

Self-adhesive SAS-9650-XY series (plastic), PRS-9651XY series (TPE)

Long lifesapn: LIM-9850-XY series

HCR

Low compression set: HTH7211-45U, HTH-7311-80

Applications

Automotive

Available grades:

LSR

Optical clear: OPT-1450-XY series

Oil bleeding: OBS-2050-XY series

HCR

Oil bleeding: OBH2953-XY series

Oil resistance:ORH-2960-XY series

High temperature resistance: HTH-7211-XY series

Applications

Advantages:

Optical clear: 92% or above light transmission (400nm)

Oil bleeding: wide range of oil content: 1% - 15%

Oil resistance: 1# and 3# engine oil resistance

High temperature resistnace: constent temperature can be up to 300℃

instent temperature resistance can be up to1000℃

Fabric coating

Advantages:

Flexible mixing ratio: 1:1 or 10:1

Customized solutions: formulations are developed based

on fabric coating properties

Stable heat resistance: -60℃～250℃

Environmental friendly: non-solvent base

Available grades:

LSR

FGS-9540-XY series

Applications

PET Film coating

Advantages:

·Good adhesion with PET based material without primer

·High strength after cure onto film, above 96% light transmittance

·Good wetting property to metal panel, glass and resin screen

·Good heat and wet resistance and stable peel adhesion

Available grades:

Low peel adhesion: PSA2049，PSA2066，PSA3060

High peel adhesion: PSA1057

Applications

T H A N K Y O U !

Guangdong Polysil Technology Co., Ltd.No.1, Yanjiang West 2nd Road, Torch Development Zone, Zhongashan 528437, Guangdong, China

www.polysil.cn