competence based well control equipment training€¦ · therefore well integrity is maintained in...
TRANSCRIPT
Competence Based Well Control Equipment Training
• An Industry Need ?
• Prior to Being on a Well • Following Being on a Well
Safety Critical Equipment
Customer Trust - Pilot
Highly Educated
1,500 Hours Flying Time
Constant On Going Training
Co - Pilot
Formal Apprenticeship Scheme
Graduate Development Program
Technically Astute
Quality Control / Product
Customer Trust - Maintenance
• Pre 2011 – Questionable Competence
• Industry Recommended Enhancements
• IOGP 476 Produced
• IOGP 476 Adopted by Accreditors (IADC / IWCF) – Improved Training
– Improved Workplace Drills
– Greater Understanding of Role, Task and Accountability
Equipment Operator (Driller) Training
Customer Trust - Driller
• Career Path Floorhand – Driller
• 5 – 6 Years = 10/12,000 Hours
• Equipment Technology Advances
• Industry Standard Training Every 2 Years
• Responsible for Operating WCE in the event of an emergency
Customer Trust - Maintenance
Responsible for ensuring that the equipment functions and therefore well integrity is maintained in an emergency situation
Standardised Industry Training Available - None
Loss of Well Control
Driller (Equipment Operator) Analysis
Developing Operator Competence
How was this Achieved?
Where is the Risk?
Equipment Failure Drill-Down
• API 53 Blowout Prevention Equipment Systems for Drilling Wells
• Section 3, Terms, Definitions and Abbreviations
• 3.1.20 Competent Person
• A person with characteristics or abilities gained through training, experience or both, measured against the manufacturers or equipment owners established requirements
• API 53 Blowout Prevention Equipment Systems for Drilling Wells
• Section 6.5, Maintenance and Testing
• 6.5.2.7 Crew Competency
• Maintenance and Testing shall be performed or supervised by a competent person(s)
Maintenance and Testing
Workplace Mentoring
In House Training
Workplace Skills
Assessment
Workplace Knowledge Assessment
Competence Assessment
Creating Competence
DIT Accredited WCE Training Courses
This Gives Us
• A lack of clarity in the overarching competence requirements for maintenance and testing employees
• A direct result meaning that it is unusual to see WCE training included in contractors training matrix
• Training providers offering a wide range of course content all under the banner of WCE Training
• A gap that has the potential to damage the engine on our aircraft, meaning no matter how skilled our pilot is, we could be going down
Status Trained Operators – Industry Standard
Maintenance Teams (Trained / Not Trained)
No Training Standard Available (What was the content)
Potential for Equipment Failure
Potential for NPT
Potential for Loss of Well Integrity
Developing Maintenance and Testing Competence Based Learning
Status Today
1. IOGP Debate within Well Experts Committee
2. Work within the Competence and Training Subcommittee of WEC
3. Draft Appendix to 476 created by Subcommittee
4. Appendix and Supporting Documents Circulated to IOGP Members
5. Approved / Rejected
6. Approved – Create Appendix for IOGP 476
7. Create IOGP Report for WCE Training and Competence
8. Accreditors Create Training Standard
9. Industry Adopts Training (Training Matrix)
10. Training Providers Adopt Standard
11. Persons Attend Training and Commence Competence Development / Enhancement
12. Operators and Maintenance Teams more Aligned in WCE tasks
13. Risk Levels Reduce
What Next
• Lack of an industry standard
• IOGP/IADC Medium for change
• You have a voice
• Repeat the Driller process
Competence Based Well Control Equipment Training
An Industry Need
Any Questions
?