completion fluids | care for the oilfield industry

7
Chemcon Speciality Chemicals.Pvt.Ltd Care for the Oilfield Industry www.cscpl.co m

Upload: chemcon-speciality-chemicalspvtltd

Post on 14-Apr-2017

20 views

Category:

Business


0 download

TRANSCRIPT

Page 1: Completion Fluids | Care for the Oilfield Industry

Chemcon Speciality Chemicals.Pvt.Ltd

Care for the Oilfield Industry

www.cscpl.com

Page 2: Completion Fluids | Care for the Oilfield Industry

As the oilfield industry is soaring new heights with each passing day owing to the increase in demand of the petroleum based products .

Completion Fluids, the most commonly used components are Completion 14.2™, Completion 12.5™ and Completion 19.2™.

Completion fluids, demand for the drilling operations required in oil and gas exploration projects.

Completion Fluids | Care for the Oilfield Industry

Page 3: Completion Fluids | Care for the Oilfield Industry

The brine solutions of zinc, sodium and calcium blended with bromides and chlorides are useful for such Oil and Gas Well Drilling purposes because of the high density and solids-free nature of such solutions. Quite a similar composition is therefore maintained in the preparation of the completion fluids.

Useful Fluids:

Page 4: Completion Fluids | Care for the Oilfield Industry

Completion 14.2™ (Calcium Bromide)

Completion 12.5™ (Sodium bromide )

Completion 19.2™ (Zinc bromide)

CAS NO. : 7789-41-5 CAS NO. : 7647-15-6 CAS NO. : 7699-45-8 & 7789-41-5 

Solution 52 % min solution 45% min NLT 2.301 gm/ cm3

Clear colourless liquid or Colour light yellow Transparent Liquid.

Colorless, Odorless, Transparent liquid.

Clear to honey colored liquid.

340 kgs drums / 1700 kgs IBC

300 kg drums / 1500 kg IBC.

380 kg drum / 1920 kg IBC

Specification of Completion Fluids

Page 5: Completion Fluids | Care for the Oilfield Industry

It is colorless, odorless and transparent liquid, resembling sodium chloride solution.

It is used as a single salt and is applicable in those purposes where the density requirement ranges within 8.4lbs/gal to 12.8lbs/gal and where the formation waters have high amount of bicarbonate and sulfate ions.

In addition to being used as a single-salt solution, this can also be used in collection with the sodium chloride solutions to get an optimum density range of 12.8lbs/gal. In fact, keeping in mind the economic factors for the oil and gas exploration projects, the NaBr/NaCl multi-salt solution is more beneficial than that of the single-salt counterpart.

Powder form of the chemical can be given on request.

Drilling Purposes

Page 6: Completion Fluids | Care for the Oilfield Industry

9th Floor, Onyx Business Center,Akshar Chowk,Old Padra Road,Vadodara – 390020,Gujarat, India.

Phone : +91 -265 2981195Fax : +91 -265 2983754

Email : [email protected]; [email protected]; [email protected]; [email protected]

Office Address: