3DateSep 22, 2015 3:21:58 PM

1

Contents1. Component 1 (comp1).......................................................................................

1.1. Definitions....................................................................................................1.2. Geometry 1..................................................................................................1.3. Materials......................................................................................................1.4. Solid Mechanics (solid)................................................................................1.5. Mesh 1.........................................................................................................

2. Study 1...............................................................................................................2.1. Stationary....................................................................................................

3. Results...............................................................................................................3.1. Data Sets.....................................................................................................3.2. Plot Groups..................................................................................................

2

1 Component 1 (comp1)1.1 Definitions1.1.1 Coordinate Systems

Boundary System 1Coordinate system type Boundary systemIdentifier sys1

1.2 Geometry 1

Geometry 1

UnitsLength unit µmAngular unit deg

3

1.3 Materials1.3.1 SiO2

SiO2

SelectionGeometric entity level DomainSelection Domain 1

4

1.4 Solid Mechanics (solid)

Solid Mechanics

FeaturesLinear Elastic Material 1Free 1Initial Values 1Fixed Constraint 1Boundary Load(pt4)

5

1.5 Mesh 1

Mesh 1

6

2 Study 12.1 StationaryStudy settingsProperty ValueInclude geometric nonlinearity Off

Mesh selectionGeometry MeshGeometry 1 (geom1) mesh1

Physics selectionPhysics DiscretizationSolid Mechanics (solid) physics

7

3 Results3.1 Data Sets3.1.1 Solution 1SolutionName ValueSolution Solver 1Component Save Point Geometry 1

Data set: Solution 1

8

3.2 Plot Groups3.2.1 Stress (solid)

Surface: von Mises stress (N/m2)

9

3.2.2 Displacement (solid)

Surface: Total displacement (µm)

10