conference tables - office furniture - · pdf fileconference tables prices effective october...
TRANSCRIPT
Conference Tables Prices effective February 5, 2018Published January 1, 2018
Specifi cation InformationGeneral Information ....................................................................................2How to Specify............................................................................................4Base Finishes .............................................................................................5Edge Details ...............................................................................................6Inlay ............................................................................................................7Laminates ...................................................................................................7Marquetry ...................................................................................................8Module Types .............................................................................................9Wood Finishes ..........................................................................................10Seating Capacity ......................................................................................12
Conference TablesCafé™ ......................................Timothy deFiebre...................................13Drum ..........................................Amir Paknya .....................................14-18Peer(R) ........................................ai3 .....................................................19-26
Index .........................................................................................................27
Geiger International, Inc. • 6095 Fulton Industrial Blvd., SW • Atlanta, GA 30336-28061 . 8 0 0 . 4 5 6 . 6 4 5 2 • w w w . g e i g e r f u r n i t u r e . c o m
02/18
General InformationTerms and ConditionsOrder Information
2 Conference Tables
Application of Standard Terms
Only the standard terms of sale stated in this catalog apply to any transaction unless those terms are modified or supplemented by a written document signed by an officer of Geiger International, Inc. (“Geiger”). Any terms contained in Customer’s purchase order, including standard printed provisions, that are additional to or contrary to these terms, are not effective.
Use of Furniture and Materials
Geiger assumes that textiles, leathers and products are intended for commercial use and are not being bought for use primarily for personal, family, or household purposes. When installed and used as intended, products remain chattel property, are not considered fixtures, and no interest in them should arise under applicable real estate law.
Furniture Prices
Prices are determined by using the published list prices in effect when Geiger receives Customer’s completed purchase order. If Customer’s requested ship date is more than three months after Geiger receives Customer’s order, it may be repriced using the list prices in effect when products ship. If Customer designates special finishes or options, additional charges may apply. Services such as design, project management, packaging, storage, inside delivery, double handling, installation, or inventory management are not included in Geiger’s list prices.
COM / COL Procedures
If an order includes Customer-supplied materials, Customer must ship those materials to Geiger at Customer’s own expense. The materials must be tagged with Geiger’s confirmation number, item number, Customer’s name, and purchase order number. Geiger is not liable for inadequacies in Customer’s materials. Geiger will notify Customer of any apparent defects in Customer’s materials before manufacturing.
Taxes
Customer is responsible for any local sales taxes or other similar taxes imposed on transactions.
Delays
Geiger is not liable for failure to ship by the acknowledged shipping date or any other date. Geiger is not liable for a delay or failure in shipment or performance if the delay or failure is caused by acts of omission of Customer, its agents, employees, contractors, a governmental authority, or God; delays in transportation; or other similar causes that are not within Geiger’s reasonable control. Geiger is excused from further performance of its obligations for the duration of a force majeure cause.
Changes and Cancellation
Geiger’s acceptance of an order is final and binding and an order may not be changed or canceled without Geiger’s written consent.
Orders placed on any of Geiger’s expedited shipment programs and orders of custom-dyed or custom-woven materials may not be changed or canceled. To change or cancel other orders, contact Geiger Customer Care in writing for authorization and applicable charges.
Storage
If Customer cannot accept delivery when products are ready, it is the customer's responsibility to transfer products to storage and products are invoiced at that time. Customer is responsible for actual storage charges and any other expenses relating to the storage of products or materials. Customer bears all risk of loss for products or materials in storage.
Freight Terms
For casegoods and seating orders shipped within the 48 contiguous United States, surface freight charges are included. For textile and leather orders actual freight charges will be invoiced. Orders are shipped via ground carrier unless requested otherwise. For orders shipped to Alaska or Hawaii, the freight terms stated above apply only to the port of embarkation. Shipments beyond that point are freight collect. Domestic deliveries are shipped FOB Geiger’s plant to a destination designated by Customer by a method Geiger selects.
Packaging and Shipping
Geiger’s casegoods products are shipped in component form. Shipments over $50,000 net are blanket wrapped. Tops and panels are shrink wrapped with cardboard corner protection. Pedestals, storage units, overheads and vertical storage units are wrapped in blankets and shrink wrapped with cardboard corner protection. Blankets are to be returned to Geiger for reuse. If the customer request cartoning on orders over $50,000 net, there will be a charge of five percent of the net order. Packing materials are recyclable.
Shipments under $50,000 net are cartoned. Cartoned shipments are packaged with cardboard channels and shrink wrap.
Geiger’s seating is cartoned in boxes for less than truckload shipments. Full truckload shipments are blanket wrapped.
If Customer requests special shipping or delivery methods, Customer is responsible for any extra costs that result.
Packaging and Shipping (continued)
Customer obtains title to products and materials and assumes the risk of loss for them upon shipment from Geiger’s plant. Geiger reserves the right to make partial shipments, of truckload quantities, as products are manufactured.
Shipping Surcharge
A shipping surcharge will be added to all orders under $100,000 based on the ship-to address. The surcharge is a percentage of the total list price of the entire order, calculated on the base price only. Upcharges for veneer, edges, textiles, pulls, etc., are not counted in the calculation.
Zone 1 3.0% (GA, NC, SC)Zone 2 3.5% (AL, FL, MS, TN, AR, LA)Zone 3 4.0% (IL, IN, KY, MI, OH, WI, IA, KS, MN, MO, ND, NE, SD, DC, MD, VA)Zone 4 4.5% (CT, MA, ME, NH, RI, VT, DE, NJ, NY, PA, WV)Zone 5 5.0% (OK, TX, AZ, NM, NV, UT, CO)Zone 6 5.5% (OR, WA, ID, MT WY, CA, Canada)
International Shipping
Orders for export are shipped Ex Works factory (Incoterms 2000). The charge for export packing is five percent of the net order value. There are no export packing charges on shipments to Canada.
Claims
All blanket wrapped shipments must be unwrapped and inspected at the dock, in the presence of the driver. Claims for "concealed damage" or "subject to inspection" will not be honored on blanket wrapped shipments.All cartoned shipments must be inspected for visual outside damage to the package.
Damages and piece count shortages must be noted on the bill of lading. Freight claims must be filed within 30 days (including cartoned shipments with concealed damage). Contact Customer Care for a warranty/freight claim form and send it by fax, mail or email to:
Geiger International6095 Fulton Industrial Blvd., SWAtlanta, GA 30336-2806Attention: Warranty DepartmentFax: 1.404.836.7519
Order Information
Herman Miller dealers must submit all purchase orders to Geiger via Omni. For assistance with this process, please contact Herman Miller Sales Technology Support at 800.833.3330.
All Geiger Gallery and non-Herman Miller dealers may submit their orders via email or fax at 404.836.7519. For assistance with this
Conference Tables 02/18
02/18
General InformationWarranty
Limitations and DisclaimersDesign Rights
Conference Tables 3
Warranty Order Information (continued)
process, please contact Geiger Customer Care at 800.456.6452.
Midwest [email protected] York [email protected] [email protected] [email protected] [email protected]'l [email protected]
Warranty
Geiger International, Inc. (“Geiger”), 6095 Fulton Industrial Blvd., SW, Atlanta, GA 30336-2806, USA, warrants the products sold by it to be free from defects in material and workmanship, regardless of the number of shifts during which the products are used, for the warranty periods specified below.
This warranty covers the sale of Geiger product in all countries. Not all of the product lines appearing on this list are marketed by Geiger in all countries, and appearance on this list does not imply an offer for sale of a product line in a particular place. Product line availability is defined in current price lists applicable to different regions.
Geiger Commercial Office Furniture Products12 yearsAll products sold under the Geiger® brand name, except as limited or described below.
Textiles and Leathers3 yearsIncludes, but is not limited to Edelman Leather, Geiger, Herman Miller, Maharam, and Place fabrics.
Nonstandard Products1 to 5 yearsWarranty length on nonstandard products not covered by the 12-year warranty is identified on individual product quotes.
All Other Products, Parts, and Services2 yearsHeight adjustable bases (electrical parts)
5 yearsHeight adjustable bases (mechanical parts)Task light electronic ballasts
3 yearsAll service parts
6 monthsAll other products, parts, and any services not listed above, sold or furnished by Geiger, except for consumable products such as light bulbs and other electronic products for which no warranty is given
Other Manufacturers’ ProductsNoneGeiger will pass through to the original purchaser any warranty supplied by other manufacturers to the extent possible, including, but not limited
to, open-line laminates.
Provisions that apply to all products and services:
During the applicable warranty period, Geiger, as its sole obligation, will repair or replace (at its option) any product, part, or component covered by this warranty and sold after the effective date of this warranty, which fails under normal use as a result of a defect in material or workmanship; Geiger will repair or replace the aforementioned product, part, or component with a comparable product, part, or component.
This warranty extends only to the original purchasers who acquire new product from Geiger, or its authorized resellers. Any product, part, or component must have been installed, used, and maintained according to Geiger’s published instructions in order to be eligible for coverage under this warranty and must not have been subject to misuse or abuse. Any modification to the original product voids the warranty. Geiger does not warrant the performance of the product when used in combination with other than original Geiger product.
The warranty period starts from the date of purchase.
This document inclusively describes all of the warranties given and remedies available with respect to the company’s products and services. Geiger disclaims any other warranty whether express or implied, statutory or otherwise, in relation to the products.
Geiger does not warrant:• natural variations in wood grain or figure or
the presence of character marks• changes in surface finishes due to aging or
exposure to light• marks, scars, or wrinkles occurring naturally
in leather• veins, marks, voids, fissures, or cracks found
naturally in stone
In addition, Geiger does not warrant:• failure resulting from normal wear and tear• the matching of colors, grains, or textures of
natural materials• the colorfastness or the matching of colors of
textiles, including an exact match to cuttings or to swatch cards
• damage, marking, or staining of veneer surfaces due to contact with rubber or similar compounds; damage from sharp objects or imprinting from writing instruments, or prolonged exposure to direct sunlight
Geiger tests Customer’s Own Material (COM) and other customer-supplied items for manufacturing quality only and does not provide any warranty with regard to these materials.
Geiger does not warrant products that are
exposed to extreme environmental conditions or that have been subject to improper storage.
Geiger’s products meet the requirements of national and specific local codes as stated in the price books and other written publications.
TO THE EXTENT ALLOWED BY LAW, ANY IMPLIED WARRANTIES, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE DISCLAIMED AND TO THE EXTENT THEY ARE LEGALLY REQUIRED, ARE LIMITED IN DURATION TO THE DURATION OF THIS WRITTEN WARRANTY.
GEIGER SHALL NOT BE LIABLE FOR LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, OR INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Applies in US only: Some states do not allow limitations on how long an implied warranty lasts or do not allow the exclusion or limitation of incidental or consequential damages, so the limitations or exclusions in the two preceding paragraphs may not apply. This warranty gives the purchaser specific legal rights; however, the purchaser may also have other rights that may vary from state to state.
Applies outside US: Except as stated above, Geiger will not be liable for any loss or damage (including costs) however caused, whether direct or consequential, incurred or suffered by the purchaser or any third party in respect of the products but nothing contained herein will or will be considered to exclude or restrict any liability on Geiger’s part for death or personal injury resulting from negligence.
Limitations and Disclaimers
Geiger is not liable for loss of time, inconvenience, lost profits, commercial loss, or other special, consequential, or incidental damages for any transaction.
Geiger reserves the right to change its designs, its methods of construction, or its prices, charges, or policies at any time without notice to Customer.
Design Rights
The designs depicted in Geiger’s catalogs and price lists are proprietary to Geiger and Geiger reserves the exclusive right to manufacture them. Any reproduction of these designs infringes Geiger’s rights and that infringement will be prosecuted.
Warranty (continued) Warranty (continued)
warranty
02/184 Conference Tables
How To SpecifyConference Tables
How to Specify
• For each product ordered, specify a product number string. The string should
include the product number and all finish and detail codes listed at the bottom of the pricebook page.
• Specify the finishes and details in the same sequence shown on the pricebook page.
• Product Number String Example: APT136 943
The product number string above includes all required codes for a Drum series table with the following specifications:
Product Number .......APT1-36 Wood Finish ............. 943 Caramel Cherry
• Basic Price reflects the price of the table without optional features. Add upcharges
as shown on the product page or option page for anigre wood finishes, solid edge detail, etched glass, leg trim or marquetry. There is no upcharge for anigre base or leg finishes.
Conference Tables 02/18
Conference Tables
How to Specify
FSC Certification
Conference Tables are made with FSC certified substrates
FSC-certified veneer is available upon request, possibly at additional cost. FSC-certified walnut solid and anigre, figured sapele and walnut veneers are not available.
The Forest Stewardship Council (FSC) is an international organization that promotes environmentally appropriate, socially beneficial and economically viable management of the world’s forests. Products carrying the FSC label are independently certified to assure consumers that materials come from forests that are managed to meet the social, economic and ecological needs of present and future generations.
02/18 Conference Tables 5
Base FinishesConference Tables
Base Finishes
Base Finishes
Base Metal FinishesFor all metal bases
926..........BlackBNZ ........BronzeCHR ........ChromeEH...........Metallic BronzeMS ..........Metallic SilverSAC ........Satin Chrome
Base Wood FinishesFor Drum table bases
662.............Toasted Walnut, matte663.............Charred Walnut, matte664.............Bronzed Walnut, matte665.............Smoked Walnut, matte666.............Coffee Walnut, matte667.............Smoked Paldao, matte668.............Figured Sycamore, matte669.............Warm Paldao, matte677.............Chocolate Ash, matte678.............Natural Oak, matte68R ............RecoGrain Rosewood, matte68W ...........RecoGrain Walnut, matte69A ............RecoGrain Frosty Ash, matte69G ............RecoGrain Wenge, matte69K ............RecoGrain Oak, matte69R ............RecoGrain Rosewood, matte69T ............RecoGrain Teak, matte69W ...........RecoGrain Walnut, matte6A1 ............White Ash, matte6K1 ............Rift Oak, matte6K6 ............Burnt Oak, matte911.............Champagne Maple, low sheen940.............Sundance Cherry on Maple, low sheen941.............Natural Beech, low sheen942.............Sundance Cherry, low sheen943.............Caramel Cherry, low sheen946.............Cocoa Cherry, low sheen951.............Natural Anigre, low sheen956.............Cocoa Sapele, low sheen962.............Toasted Walnut, low sheen963.............Charred Walnut, low sheen964.............Bronzed Walnut, low sheen965.............Smoked Walnut, low sheen966.............Coffee Walnut, low sheen967.............Smoked Paldao, low sheen968.............Figured Sycamore, low sheen969.............Warm Paldao, low sheen977.............Chocolate Ash, low sheen978.............Natural Oak, low sheen981.............Champagne Hickory, low sheen991.............Champagne Ash, low sheen998.............Ebony Ash, low sheen98R ............RecoGrain Rosewood, low sheen98W ...........RecoGrain Walnut, low sheen99A ............RecoGrain Frosty Ash, low sheen99G ............RecoGrain Wenge, low sheen99K ............RecoGrain Oak, low sheen99R ............RecoGrain Rosewood, low sheen99T ............RecoGrain Teak, low sheen99W ...........RecoGrain Walnut, low sheen9A1 ............White Ash, low sheen9K1 ............Rift Oak, low sheen9K6 ............Burnt Oak, low sheenED..............Aged Cherry, low sheenEK ..............Medium Red Walnut, low sheenET ..............Clear On Ash, matteEU..............Oak On Ash, matteEV ..............Walnut On Ash, matteG2U ...........Light Brown Walnut, low sheenG40 ............Dark Brown Walnut, low sheenUX..............Walnut On Cherry, low sheen
Options and Finishes
02/186 Conference Tables
Edge DetailsConference Tables
Edge Details
Solid Edge Details For Drum table tops(add upcharge shown on the product page)
Solid Overhang DepthT51 ...Cove .............................1/4" ........... 3/4"T52 ...Indent ..............................0" ........... 3/4"T53 ...Step .................................0" ........... 3/4"T54 ...Bead ................................0" ........... 3/4"E01 ...Square ..........................1/4" .............. 1"E02 ...Quarter Radius .............1/4" .............. 1"E03 ...Bullnose ........................3/4" .............. 1"E04 ...Chamfer ........................1/4" .............. 1"E06 ...Waterfall .......................1/4" ........1-1/2"E07 ...Ellipse ...........................3/4" .............. 1"E10 ...Stepped Bullnose .........3/4" .............. 1"E11 ...Classical .......................1/4" .............. 1"E12 ...Knife ................................2" .............. 2"E14 ...Quarter Round ..............3/4" .............. 1"E15 ...Stepped Waterfall .........1/4" ........1-1/2"E16 ...Oval ..............................1/4" ........1-1/2"E17 ...Stepped Radius ............1/4" .............. 1"E20 ...Stepped Knife ...............3/4" .............. 1"
Notes
All solid edge details are 1 1/2" thick.
For products with solid wood edges, the solid wood species used with each type of wood finish is as follows:
Anigre finish ............cherry solidAsh finish ................ash solidBeech finish ............maple solidCherry finish ...........cherry solidHickory finish ..........oak solidMaple finish ............maple solidOak finish................oak solidSapele finish ...........mahogany solidWalnut finish ...........walnut solid
Natural wood finishes are unstained to maintain the natural beauty and clarity of the wood. When the veneer and solid wood species are not the same the veneer and solid may differ in color and graining. When a stained wood finish is specified, the solid wood edges are stained to match the veneer top as closely as possible.
Edge Details
Basic Edge DetailFor Drum table tops (no upcharge)
T50 .......Tablet Square
Notes
T50 Square edge is 1-1/2" thick with 3/16" deep solid banding with no edge overhang. Banding is two layers, each is 2mm thick for a total of 3/16".
T50 Square edge is not available with inlay or marquetry.
02/18 Conference Tables 7
Inlay • LaminatesConference Tables
Inlay • Laminates
Inlay
Metal Inlay For Drum tables(add upcharge shown on the product page)
I926.........BlackIBNZ .......BronzeICHR .......ChromeISAC .......Satin Chrome
No Inlay
NOIM ......No Inlay Required
Notes
Metal inlay is 3/16" wide.
Inlay is available only with solid edge detail.
Laminates
Laminate Finishes For Peer tables
I54...........Folkstone Grey (HMI code 8Q)I60...........Soft White (HMI code LU)I65...........Chalk White (HMI code X1)I73...........Black Umber (HMI code BU)I74...........Inner Tone Light (HMI code HF)I75...........Light Tone (HMI code LT)I76...........Medium Tone (HMI code MT)I77...........Cool Grey Neutral (HMI code CL)I78...........Inner Tone (HMI code HT)I81...........Warm Grey Neutral (HMI code WN)I84...........White (HMI code 91)I92...........Studio White (HMI code 98)
Notes
When ordering samples please use HMI codes.
02/188 Conference Tables
MarquetryConference Tables
Marquetry
Marquetry
Triangle Marquetry For Drum tables(add T Marquetry upcharge shown on the product page)
T312 .......BlackT11 .........Champagne MapleT21 .........Champagne BeechT42 .........Sundance CherryT81 .........Champagne HickoryTUL .........Natural Maple (HMI)
Square Marquetry For Drum tables(add S Marquetry upcharge shown on the product page)
S312 .......BlackS11 .........Champagne MapleS21 .........Champagne BeechS42 .........Sundance CherryS81 .........Champagne HickorySUL.........Natural Maple (HMI)
No Marquetry
NOIM ......No Marquetry Required
Simple Line MarquetryFor Drum tables(add B Marquetry upcharge shown on the product page)
B312 .......Black B11 .........Champagne Maple B21 .........Champagne BeechB42 .........Sundance CherryB81 .........Champagne HickoryBUL.........Natural Maple (HMI)
No Marquetry
NOIM ......No Marquetry Required
Notes
Marquetry is available only with solid edge detail.
Black wood marquetry is available on stained and natural wood finish tops. Natural finish marquetry is available on natural wood finish tops only.
Square and Triangle Marquetry includes simple line marquetry and inlaid wood medallions. Medallion locations vary according to the table size, shape and corner detail. Examples show a mitered corner detail, available on square and rectangular tables.
Marquetry sheen will match top sheen.
Wood marquetry is 3/16" wide.
02/18 Conference Tables 9
Module TypesConference Tables
Module Types
Module Types
For Peer tabletop power module, 120" cord with 3-prong plug, qty (2)(no upcharge)
PTPLG ......2 power/2 dataPSPLG......2 power/1 data/1 USB
For Peer tabletop power module, qty (1) 120" cord with 3-prong plug, and qty (1) 168" cord with 3-prong plug(add +$40 upcharge)
PTPLL.......2 power/2 dataPSPLL ......2 power/1 data/1 USB
For Peer tabletop power module, hardwire, qty (2) 72" whip(add +$60 upcharge)
PTHDW ....2 power/2 dataPSHDW ....2 power/1 data/1 USB
For Peer tabletop power module, hardwire, qty (1) 72" whip and qty (1) 168" whip(add +$100 upcharge)
PTHDL ......2 power/2 dataPSHDL......2 power/1 data/1 USB
For Peer tabletop power module, Chicago hardwire, qty (2) 15" whip(add +$300 upcharge)
PTCHI .......2 power/2 dataPSCHI.......2 power/1 data/1 USB
For Peer under-table power module
PUPLG .....3-Prong Plug, qty (1) 120" cord, (no upcharge)PUPLL ......3-Prong Plug, qty (1) 168" cord (+$40 upcharge)PUHDW ....Hardwire, qty (1) 72" whip (+$60 upcharge)PUHDX .....Hardwire, qty (1) 120" whip (+$100 upcharge)PUHDL .....Hardwire, qty (1) 168" whip (+$140 upcharge)PUCHI ......Chicago Hardwire, qty (1) 15" whip (+$60 upcharge)
How to Specify Power Modules
Specify under-table power module type based on location of building power (under one leg or two legs) and power module installation location (left, center or right).
Specify tabletop power module type based on location of building power and table size.
For tabletop power modules and building power under one leg 72W x 30H .................... PTPLG, PTHDL, PSPLG, PSHDL, or PTCHI 72W x 41.5H ................. PTPLG, PTHDL, PSPLG, PSHDL, or PTCHI
96W x 30H .................... PTPLG, PTHDL, PSPLG, PSHDL, or PTCHI 96W x 41.5H ................. PTPLL, PTHDL, PSPLL, PSHDL, or PTCHI 120W x 30H .................. PTPLL, PTHDL, PSPLL, PSHDL, or PTCHI 120W x 41.5H ............... PTPLL, PTHDL, PSPLL, PSHDL, or PTCHI
For tabletop power modules and building power under two legs All Table Sizes .............. PTPLG, PTHDW, PSPLG, PSHDW, or PTCHI
Notes
All power modules are clear anodized aluminum.
Tabletop power modules include two simplexoutlets and either two voice/data openings orone voice/data opening and one dual chargingUSB port.
All tabletop power modules include a voice/data adapter kit which includes a set of 14 small windows that snap into the voice/data opening and accept different types of jacks, connectors, and couplers.
Under-table power modules include three simplex outlets, two voice/data openings, and a voice/data adapter kit.
Connectors and jacks are the responsibility of the customer's phone, AV, or IT contractor. Provision of the building power and hardwire connections are the responsibility of the customer's electrician.
The Chicago tabletop and under-table power modules include 15" of conduit and a 4" x 4" junction box.
02/1810 Conference Tables
Wood FinishesConference Tables
Wood Finishes
Wood Finishes
662 Toasted Walnut, matte • • • flat walnut walnut book663 Charred Walnut, matte • • • flat walnut walnut book664 Bronzed Walnut, matte • • • flat walnut walnut book665 Smoked Walnut, matte • • • flat walnut walnut book666 Coffee Walnut, matte • • • flat walnut walnut book667 Smoked Paldao, matte +15% • • • quarter paldao walnut slip668 Figured Sycamore, matte +40% • • • quarter sycamore maple slip669 Warm Paldao, matte +15% • • • quarter paldao walnut slip677 Chocolate Ash, matte • • • flat ash ash book678 Natural Oak, matte • • • flat oak oak book911 Champagne Maple, low sheen • • • flat maple maple book940 Sundance Cherry on Maple, low sheen • • • flat maple maple book941 Natural Beech, low sheen • • • flat beech beech book942 Sundance Cherry, low sheen • • • flat cherry cherry book943 Caramel Cherry, low sheen • • • flat cherry cherry book946 Cocoa Cherry, low sheen • • • flat cherry cherry book951 Natural Anigre, low sheen +40% • • • quarter anigre maple slip956 Cocoa Sapele, low sheen • • • quarter sapele mahogany slip962 Toasted Walnut, low sheen • • • flat walnut walnut book963 Charred Walnut, low sheen • • • flat walnut walnut book964 Bronzed Walnut, low sheen • • • flat walnut walnut book965 Smoked Walnut, low sheen • • • flat walnut walnut book966 Coffee Walnut, low sheen • • • flat walnut walnut book967 Smoked Paldao, low sheen +15% • • • quarter paldao walnut slip968 Figured Sycamore, low sheen +40% • • • quarter sycamore maple slip969 Warm Paldao, low sheen +15% • • • quarter paldao walnut slip977 Chocolate Ash, low sheen • • • flat ash ash book978 Natural Oak, low sheen • • • flat oak oak book981 Champagne Hickory, low sheen • • • flat hickory oak book991 Champagne Ash, low sheen • • • flat ash ash book998 Ebony Ash, low sheen • • • flat ash ash book68R RecoGrain Rosewood, matte • x • flat rosewood none slip68W RecoGrain Walnut, matte -5% • x • flat walnut none slip69A RecoGrain Frosty Ash, matte • x • quarter ash none slip69G RecoGrain Wenge, matte -5% • x • quarter wenge none slip69K RecoGrain Oak, matte -5% • x • quarter oak none slip69R RecoGrain Rosewood, matte • x • quarter rosewood none slip69T RecoGrain Teak, matte • x • quarter teak none slip69W RecoGrain Walnut, matte -5% • x • quarter walnut none slip6A1 White Ash, matte • • • quarter ash ash slip6K1 Rift Oak, matte • • • rift oak oak slip6K6 Burnt Oak, matte • • • rift oak oak slip98R RecoGrain Rosewood, low sheen • x • flat rosewood none slip98W RecoGrain Walnut, low sheen -5% • x • flat walnut none slip99A RecoGrain Frosty Ash, low sheen • x • quarter ash none slip
Code Description Upc
harg
e
Caf
é
Dru
m
Pee
r
CutVeneer Species
Solid Species Match
• = Availablex = Not Available with Solid Edge Detail
02/18 Conference Tables 11
Wood FinishesConference Tables
Wood Finishes
99G RecoGrain Wenge, low sheen -5% • x • quarter wenge none slip99K RecoGrain Oak, low sheen -5% • x • quarter oak none slip99R RecoGrain Rosewood, low sheen • x • quarter rosewood none slip99T RecoGrain Teak, low sheen • x • quarter teak none slip99W RecoGrain Walnut, low sheen -5% • x • quarter walnut none slip9A1 White Ash, low sheen • • • quarter ash ash slip9K1 Rift Oak, low sheen • • • rift oak oak slip9K6 Burnt Oak, low sheen • • • rift oak oak slipED Aged Cherry, low sheen • • • flat cherry cherry bookEK Medium Red Walnut, low sheen • • • flat walnut walnut bookET Clear On Ash, matte • x • quarter ash none slipEU Oak On Ash, matte • x • quarter oak none slipEV Walnut On Ash, matte • x • quarter walnut none slip
G2U Light Brown Walnut, low sheen • • • flat walnut walnut bookG40 Dark Brown Walnut, low sheen • • • flat walnut walnut bookUX Walnut On Cherry, low sheen • • • flat cherry cherry book
Code Description Upc
harg
e
Caf
é
Dru
m
Pee
r
CutVeneer Species
Solid Species Match
• = Availablex = Not Available with Solid Edge Detail
Custom Veneer Layup
Custom veneer layup is available on selected tables with one-piece tops. Contact your Geiger sales representative for availability, ordering information and upcharges.
Sunburst layup is not available in maple, bird's-eye maple or sycamore.
Diamond Reverse Diamond
Sunburst
Notes
Most natural wood finishes are unstained to maintain the natural beauty and clarity of the wood. When the veneer and solid wood species are not the same the veneer and solid may differ in color and graining. When a stained wood finish is specified, the solid wood edges are stained to match the veneer top as closely as possible.
Special finish colors may be developed for orders over $200,000 list upon request at no additional charge. A one time set-up fee of $250 net will be charged on orders under $200,000 list for each special finish. In order to protect the quality and durability of Geiger's finish, the chemical composition of the staining materials, water-base sealers, and urethane top coats will not be altered for special finishes.
Exotic veneers such as pearwood, bird's eye maple and sycamore are available upon request, at additional cost.
For further information and procedures for special finishes or exotic veneers, contact your Geiger sales representative.
02/1812 Conference Tables
Seating CapacityConference TablesSeating Capacity
Table Size No. Chairs 30" x 60" ....................... 4-6 30" x 66" ....................... 4-6 30" x 72" .......................... 6 36" x 66" .......................... 6 36" x 72" .......................... 6 36" x 78" .......................... 6 36" x 84" ....................... 6-8 36" x 90" ....................... 6-8 36" x 96" .......................... 8 42" x 84" ....................... 6-8 42" x 90" .......................... 8 42" x 96" .......................... 8 48" x 84" .......................... 8 48" x 90" .......................... 8 48" x 96" .......................... 8 48" x 102" ........................ 8 48" x 108" ........................ 8 48" x 114" ...................... 10
Seating Capacity
Seating capacity shown is applicable for Café and Drum tables only. Capacity is approximate, based on 25" wide chair, and may vary according to table base design and actual chair dimensions.
Table Size No. Chairs 48" x 120" ...................... 10 54" x 120" ...................... 10 54" x 132" ...................... 10 54" x 144" ...................... 12 54" x 156" ...................... 12 54" x 168" ...................... 14 60" x 120" ................. 10-12 60" x 132" ................. 10-12 60" x 144" ................. 12-14 60" x 156" ................. 12-14 60" x 168" ................. 14-16
Table Size No. Chairs 60" x 180" ...................... 14 60" x 192" ................. 14-16 60" x 204" ...................... 16 60" x 216" ...................... 16 60" x 228" ...................... 18 60" x 240" ...................... 18
Table Size No. Chairs 36" diameter ................... 4 42" diameter ................... 4 48" diameter .................... 5 54" diameter .................... 6 60" diameter .................... 6
Table Size No. Chairs66" x 66" ................................ 872" x 72" ................................ 878" x 78" ................................ 884" x 84" .............................. 1290" x 90" .............................. 1296" x 96" .............................. 12102" x 102" .......................... 12108" x 108" .......................... 12
Table Size No. Chairs 36" x 36" .......................... 4 42" x 42" .......................... 4 48" x 48" .......................... 4 54" x 54" .......................... 4 60" x 60" .......................... 8
Table Size No. Chairs66" diameter .......................... 772" diameter .......................... 878" diameter .......................... 884" diameter .......................... 990" diameter ........................ 1096" diameter ........................ 10102" diameter ...................... 11108" diameter ...................... 12
Tables with outside leg placement accommodate fewer chairs. For seating capacity of Round Series, Square Series, and Stern
tables, please contact Geiger Customer Care at 1.800.456.6452.
02/18 Conference Tables 13
CaféConference Tables
Specify
Base Basic Solid Inlay or B S or TProduct Number Depth Width Height Dia. Price Edge Marq. Marq.
WoodBase
Tops are 1 1/2” thick wood; edge detail is included on user sideTop depth shown does not include edge overhangCasters are black, dual wheel, 1 1/4” diameterUse Basic price when T50 edge detail is specified on table topAdd Solid Edge upcharge for solid edge details
Top .........wood veneered 1 7/8" thick with veneered sloped edgeBase .......metal
veneered sloped edge
Café
Conference Tables 02/18
Conference Tables
Café
ACF1-36 36 36 29 $2,490 ACF1-42 42 42 29 $2,940 ACF1-48 48 48 29 $3,420
Specify
Base Basic Solid Inlay or B S or TProduct Number Depth Width Height Dia. Price Edge Marq. Marq.
02/1814 Conference Tables
DrumConference Tables
WoodEdgeBaseInlay (not available with T50 edge)Marquetry (not available with T50 edge)
Drum • Round
Drum • Roundtwo-piece top
Drum • Rectangularradius corners
mitered corners
Drum
Top .........1 1/2" thick wood veneered with specified edge detailBase .......wood veneered drums
Top .........1 1/2" thick wood veneered with specified edge detailBase .......wood veneered drum
Top .........1 1/2" thick wood veneered with specified edge detailBase .......wood veneered drum
APT1-36 36 36 29 18 $2,760 +420 +692 +1,492APT1-42 42 42 29 20 $3,170 +490 +807 +1,607APT1-48 48 48 29 24 $3,665 +559 +923 +1,723APT1-54 54 54 29 24 $4,095 +630 +1,038 +1,838APT1-60 60 60 29 30 $4,735 +698 +1,154 +1,954
APT1-66 66 66 29 30 $6,545 +768 +1,281 +2,081APT1-72 72 72 29 36 $7,330 +838 +1,409 +2,209APT1-78 78 78 29 39 $8,145 +908 +1,536 +2,336APT1-84 84 84 29 42 $9,040 +978 +1,665 +2,465
APT5R-3678 36 78 29 18 $5,240 +663 +1,154 +1,954APT5R-3684 36 84 29 18 $5,395 +698 +1,154 +1,954APT5R-3690 36 90 29 18 $5,590 +733 +1,281 +2,081APT5R-3696 36 96 29 18 $5,710 +768 +1,281 +2,081
APT5R-4284 42 84 29 20 $5,895 +733 +1,281 +2,081APT5R-4290 42 90 29 20 $6,015 +768 +1,281 +2,081APT5R-4296 42 96 29 20 $6,230 +802 +1,409 +2,209
APT5R-4884 48 84 29 24 $6,335 +768 +1,281 +2,081APT5R-4890 48 90 29 24 $6,550 +802 +1,409 +2,209APT5R-4896 48 96 29 24 $6,750 +838 +1,409 +2,209APT5R-48102 48 102 29 24 $6,985 +872 +1,536 +2,336APT5R-48108 48 108 29 24 $7,180 +908 +1,536 +2,336APT5R-48114 48 114 29 24 $7,380 +942 +1,665 +2,465
APT5M-3678 36 78 29 18 $5,050 +663 +1,154 +1,954APT5M-3684 36 84 29 18 $5,185 +698 +1,154 +1,954APT5M-3690 36 90 29 18 $5,400 +733 +1,281 +2,081APT5M-3696 36 96 29 18 $5,520 +768 +1,281 +2,081
APT5M-4284 42 84 29 20 $5,735 +733 +1,281 +2,081APT5M-4290 42 90 29 20 $5,825 +768 +1,281 +2,081APT5M-4296 42 96 29 20 $6,040 +802 +1,409 +2,209
APT5M-4884 48 84 29 24 $6,175 +768 +1,281 +2,081APT5M-4890 48 90 29 24 $6,375 +802 +1,409 +2,209APT5M-4896 48 96 29 24 $6,575 +838 +1,409 +2,209APT5M-48102 48 102 29 24 $6,785 +872 +1,536 +2,336APT5M-48108 48 108 29 24 $6,990 +908 +1,536 +2,336APT5M-48114 48 114 29 24 $7,200 +942 +1,665 +2,465
02/18 Conference Tables 15
DrumConference Tables
Specify
Base Basic Solid Inlay or B S or TProduct Number Depth Width Height Dia. Price Edge Marq. Marq.
WoodEdgeBaseInlay (not available with T50 edge)Marquetry (not available with T50 edge)
Drum • Rectangulartwo-piece top
radius corners
mitered corners
Drum • Rectangulartwo-piece top
radius corners
mitered corners
Drum • Rectangularthree-piece top
radius corners
mitered corners
Top .........1 1/2" thick wood veneered with specified edge detailBase .......wood veneered drums
Top .........1 1/2" thick wood veneered with specified edge detailBase .......wood veneered drums
Top .........1 1/2" thick wood veneered with specified edge detailBase .......wood veneered drums
APT3R-48120 48 120 29 24 $10,020 +978 +1,665 +2,465APT3R-54120 54 120 29 24 $10,605 +1,011 +1,793 +2,593APT3R-54132 54 132 29 24 $11,210 +1,081 +1,922 +2,722APT3R-54144 54 144 29 24 $11,735 +1,153 +2,049 +2,849
APT3R-60120 60 120 29 30 $11,395 +1,048 +1,793 +2,593APT3R-60132 60 132 29 30 $12,015 +1,117 +1,922 +2,722APT3R-60144 60 144 29 30 $12,625 +1,187 +2,049 +2,849APT3R-60156 60 156 29 30 $13,250 +1,257 +2,177 +2,977APT3R-60168 60 168 29 30 $13,855 +1,326 +2,305 +3,105
APT3M-48120 48 120 29 24 $9,790 +978 +1,665 +2,465APT3M-54120 54 120 29 24 $10,360 +1,011 +1,793 +2,593APT3M-54132 54 132 29 24 $11,000 +1,081 +1,922 +2,722APT3M-54144 54 144 29 24 $11,490 +1,153 +2,049 +2,849
APT3M-60120 60 120 29 30 $11,155 +1,048 +1,793 +2,593APT3M-60132 60 132 29 30 $11,810 +1,117 +1,922 +2,722APT3M-60144 60 144 29 30 $12,385 +1,187 +2,048 +2,848APT3M-60156 60 156 29 30 $13,040 +1,257 +2,177 +2,977APT3M-60168 60 168 29 30 $13,625 +1,326 +2,305 +3,105
APT3R-54156 54 156 29 24 $13,975 +1,222 +2,049 +2,849APT3R-54168 54 168 29 24 $14,500 +1,292 +2,177 +2,977
APT3M-54156 54 156 29 24 $13,755 +1,222 +2,049 +2,849APT3M-54168 54 168 29 24 $14,265 +1,292 +2,177 +2,977
APT3R-60180 60 180 29 30 $18,260 +1,397 +2,433 +3,233APT3R-60192 60 192 29 30 $18,950 +1,467 +2,433 +3,233APT3R-60204 60 204 29 30 $19,600 +1,536 +2,561 +3,361APT3R-60216 60 216 29 30 $20,255 +1,606 +2,689 +3,489APT3R-60228 60 228 29 30 $20,960 +1,675 +2,817 +3,617APT3R-60240 60 240 29 30 $21,635 +1,745 +2,946 +3,746
APT3M-60180 60 180 29 30 $17,955 +1,397 +2,433 +3,233APT3M-60192 60 192 29 30 $18,645 +1,467 +2,433 +3,233APT3M-60204 60 204 29 30 $19,300 +1,536 +2,561 +3,361APT3M-60216 60 216 29 30 $19,935 +1,606 +2,689 +3,489APT3M-60228 60 228 29 30 $20,625 +1,675 +2,817 +3,617APT3M-60240 60 240 29 30 $21,295 +1,745 +2,946 +3,746
Specify
Base Basic Solid Inlay or B S or TProduct Number Depth Width Height Dia. Price Edge Marq. Marq.
02/1816 Conference Tables
DrumConference Tables
WoodEdgeBaseInlay (not available with T50 edge)Marquetry (not available with T50 edge)
Top .........1 1/2" thick wood veneered with specified edge detailBase .......wood veneered drums
Top .........1 1/2" thick wood veneered with specified edge detailBase .......wood veneered drums
Top .........1 1/2" thick wood veneered with specified edge detailBase .......wood veneered drums
Top .........1 1/2" thick wood veneered with specified edge detailBase .......wood veneered drums
Drum • Racetrack
Drum • Racetracktwo-piece top
Drum • Racetracktwo-piece top
Drum • Racetrackthree-piece top
APT6-3678 36 78 29 18 $5,450 +663 +1,154 +1,954APT6-3684 36 84 29 18 $5,570 +698 +1,154 +1,954APT6-3690 36 90 29 18 $5,785 +733 +1,281 +2,081APT6-3696 36 96 29 18 $5,900 +768 +1,281 +2,081
APT6-4284 42 84 29 20 $6,105 +733 +1,281 +2,081APT6-4290 42 90 29 20 $6,240 +768 +1,281 +2,081APT6-4296 42 96 29 20 $6,455 +802 +1,409 +2,209
APT6-4884 48 84 29 24 $6,560 +768 +1,281 +2,081APT6-4890 48 90 29 24 $6,760 +802 +1,409 +2,209APT6-4896 48 96 29 24 $6,990 +838 +1,409 +2,209APT6-48102 48 102 29 24 $7,220 +872 +1,536 +2,336APT6-48108 48 108 29 24 $7,420 +908 +1,536 +2,336APT6-48114 48 114 29 24 $7,665 +942 +1,665 +2,465
APT2-48120 48 120 29 24 $9,650 +978 +1,665 +2,465
APT2-54120 54 120 29 24 $10,245 +1,011 +1,793 +2,593APT2-54132 54 132 29 24 $10,900 +1,081 +1,922 +2,722APT2-54144 54 144 29 24 $11,560 +1,153 +2,049 +2,849
APT2-60120 60 120 29 30 $11,055 +1,048 +1,793 +2,593APT2-60132 60 132 29 30 $11,695 +1,117 +1,922 +2,722APT2-60144 60 144 29 30 $12,315 +1,187 +2,049 +2,849APT2-60156 60 156 29 30 $12,970 +1,257 +2,177 +2,977APT2-60168 60 168 29 30 $13,610 +1,326 +2,305 +3,105
APT2-54156 54 156 29 24 $13,960 +1,222 +2,049 +2,849APT2-54168 54 168 29 24 $14,500 +1,292 +2,177 +2,977
APT2-60180 60 180 29 30 $17,800 +1,397 +2,433 +3,233APT2-60192 60 192 29 30 $18,450 +1,467 +2,433 +3,233APT2-60204 60 204 29 30 $19,170 +1,536 +2,561 +3,361APT2-60216 60 216 29 30 $19,855 +1,606 +2,689 +3,489APT2-60228 60 228 29 30 $20,575 +1,675 +2,817 +3,617APT2-60240 60 240 29 30 $21,265 +1,745 +2,946 +3,746
02/18 Conference Tables 17
DrumConference Tables
Specify
Base Basic Solid Inlay or B S or TProduct Number Depth Width Height Dia. Price Edge Marq. Marq.
WoodEdgeBaseInlay (not available with T50 edge)Marquetry (not available with T50 edge)
Drum • Boat Shapemitered corners
Drum • Boat Shapetwo-piece topmitered corners
Top .........1 1/2" thick wood veneered with specified edge detailBase .......wood veneered drumsDepth ......depth dimensions shown are for overall top size (to outside of arc); end depth is 12" less than overall depth
Top .........1 1/2" thick wood veneered with specified edge detailBase .......wood veneered drumsDepth ......depth dimensions shown are for overall top size (to outside of arc); end depth is 12" less than overall depth
APT8-4884 48 84 29 24 $7,410 +768 +1,281 +2,081APT8-4890 48 90 29 24 $7,690 +802 +1,409 +2,209APT8-4896 48 96 29 24 $7,940 +838 +1,409 +2,209APT8-48102 48 102 29 24 $8,230 +872 +1,536 +2,336APT8-48108 48 108 29 24 $8,530 +908 +1,536 +2,336APT8-48114 48 114 29 24 $8,760 +942 +1,665 +2,465
APT4-48120 48 120 29 24 $11,120 +978 +1,665 +2,465
APT4-54120 54 120 29 24 $11,885 +1,011 +1,793 +2,593APT4-54132 54 132 29 24 $12,700 +1,081 +1,922 +2,722APT4-54144 54 144 29 24 $13,370 +1,153 +2,049 +2,849
APT4-60120 60 120 29 30 $12,855 +1,048 +1,793 +2,593APT4-60132 60 132 29 30 $13,650 +1,117 +1,922 +2,722APT4-60144 60 144 29 30 $14,500 +1,187 +2,049 +2,849APT4-60156 60 156 29 30 $15,335 +1,257 +2,177 +2,977APT4-60168 60 168 29 30 $16,145 +1,326 +2,305 +3,105
Specify
Base Basic Solid Inlay or B S or TProduct Number Depth Width Height Dia. Price Edge Marq. Marq.
02/1818 Conference Tables
DrumConference Tables
WoodEdgeBaseInlay (not available with T50 edge)Marquetry (not available with T50 edge)
Top .........1 1/2" thick wood veneered with specified edge detailBase .......wood veneered drumsDepth ......depth dimensions shown are for overall top size (to outside of arc); end depth is 12" less than overall depth
Top .........1 1/2" thick wood veneered with specified edge detailBase .......wood veneered drumsDepth ......depth dimensions shown are for overall top size (to outside of arc); end depth is 12" less than overall depth
Drum • Boat Shapetwo-piece topmitered corners
Drum • Boat Shapethree-piece topmitered corners
APT4-54156 54 156 29 24 $16,080 +1,222 +2,049 +2,849APT4-54168 54 168 29 24 $16,750 +1,292 +2,177 +2,977
APT4-60180 60 180 29 30 $20,715 +1,397 +2,433 +3,233APT4-60192 60 192 29 30 $21,595 +1,467 +2,433 +3,233APT4-60204 60 204 29 30 $22,475 +1,536 +2,561 +3,361APT4-60216 60 216 29 30 $23,370 +1,606 +2,689 +3,489APT4-60228 60 228 29 30 $24,280 +1,675 +2,817 +3,617APT4-60240 60 240 29 30 $25,195 +1,745 +2,946 +3,746
02/18 Conference Tables 19
Peer Tables Product Features Conference Tables
Tabletop module can be specified with a 10' or 14' cord with plug, a hardwired version with a 6' or 14' flexible conduit, or a hardwired version for Chicago. It is available in two different power/voice/data configurations.
Two optional tabletop power modules at either end of the table provide readily accessible power, voice and data connections. The tabletop power module is retractable to sit nearly flush with the table top when not in use.
All Peer tables ship ready to accept an under-table power module in any of three locations (left, right or center). Specify modules separately. No tools are required for installation.
Cables pass through any of three grommets in the shelf to the under-table power modules, keep-ing cords from underfoot and the table surface clear.
Cables are carried along the trough on the underside of the table top and fed down concealed cable-ways within the end panels. (PTPLL power module shown)
Under-table module can be specified with a 10' or 14' cord with plug, a hardwired version with a 6' or 14' flexible conduit, or a hard-wired version for Chicago. It comes standard with three simplex receptacles and two knockouts for voice/data/audio/video.
Note: Peer desktop and under table power modules are approved for use in the United States. For international use, tables (AI3E_) can be specified that include two appropriate sized cutouts at either end of the table to accept two Pivot 25 power modules from Office Electrics. These power modules are not supplied by Geiger, but can be purchased from Office Electrics. Please go to http://www.office-electrics.com/en/pivot.html for details.
Use Peer's 2 1/2" high storage shelf for personal items, leaving the primary surface clear for the task at hand.
Peer Tables Product Features
Provision of building power source is the responsibility of the customer. A hardwire connection or plug-in receptacle should be centered under one or both Peer table leg, depending on the module type specified, within the 2-1/2" x 11" opening.
11"
2-1/2"
Specify
Shelf BasicProduct Number Depth Width Height Depth Price
02/1820 Conference Tables
Peer Tables • Under-table Power ModuleConference Tables
AI3UP-P 3 12 3 $530
Module Type
Peer Tables • Under-Table Power Module
Peer • Under-Table Power Module
(shown with cord and three-prong plug)
Under-table power module is anodized aluminum and includes three power receptacles and two voice/data knockoutsUnder-table power module attaches to the underside of AI3N tables in either left, center or right positionsUnder-table power module is available with cord and three-prong plug, hardwired, or hardwired for use in ChicagoAdd upcharge shown on option page for hardwired and Chicago modules
02/18 Conference Tables 21
Peer Tables • Desk Height • All WoodConference Tables
Specify
Shelf BasicProduct Number Depth Width Height Depth Price
WoodModule (for powered tables only)
AI3P tables include two flip-up tabletop power modulesTabletop power modules are anodized aluminum.See Module Types option page for option pricing, power module configurations and wiring options.All tables accept an under-table power module in left, center and right positions; specify separatelyInside width clearance is total table width less 9 1/8". Height under table is 25 1/2".
AI3NW-207230 20 72 30 11 7/8 $6,190 AI3NW-209630 20 96 30 11 7/8 $6,455 AI3NW-2012030 20 120 30 11 7/8 $6,680
AI3NF-207230 20 72 30 6 $6,550 AI3NF-209630 20 96 30 6 $6,805 AI3NF-2012030 20 120 30 6 $7,060
AI3NF-367230 36 72 30 10 $7,185 AI3NF-369630 36 96 30 10 $7,595 AI3NF-3612030 36 120 30 10 $8,015
AI3NF-407230 40 72 30 12 $7,420 AI3NF-409630 40 96 30 12 $8,025 AI3NF-4012030 40 120 30 12 $8,520
AI3PF-367230 36 72 30 10 $8,185 AI3PF-369630 36 96 30 10 $8,600 AI3PF-3612030 36 120 30 10 $9,130
AI3PF-407230 40 72 30 12 $8,970 AI3PF-409630 40 96 30 12 $9,040 AI3PF-4012030 40 120 30 12 $9,630
AI3EF-367230 36 72 30 10 $8,185 AI3EF-369630 36 96 30 10 $8,600 AI3EF-3612030 36 120 30 10 $9,130
AI3EF-407230 40 72 30 12 $8,970 AI3EF-409630 40 96 30 12 $9,040 AI3EF-4012030 40 120 30 12 $9,630
Peer • Desk HeightPlain Top • All Woodfor use against a wall
Peer • Desk HeightPlain Top • All Woodfreestanding
Peer • Desk Height With Tabletop Power Modules All Woodfreestanding
Peer • Desk Height Cutouts for European PowerAll Woodfreestanding
Peer Tables • Desk Height • All Wood
Note: accepts two Pivot 25 power modules from Office Electrics. These power modules are not supplied by Geiger, but can be purchased from Office Electrics. Please go to http://www.oeelectrics.com/en/pivot for details.
Specify
Shelf BasicProduct Number Depth Width Height Depth Price
02/1822 Conference Tables
Peer Tables • Standing Height • All WoodConference Tables
AI3NW-207242 20 72 41 1/2 11 7/8 $6,745 AI3NW-209642 20 96 41 1/2 11 7/8 $7,040 AI3NW-2012042 20 120 41 1/2 11 7/8 $7,370
AI3NF-207242 20 72 41 1/2 6 $6,960 AI3NF-209642 20 96 41 1/2 6 $7,220 AI3NF-2012042 20 120 41 1/2 6 $7,470
AI3NF-367242 36 72 41 1/2 10 $7,735 AI3NF-369642 36 96 41 1/2 10 $8,240 AI3NF-3612042 36 120 41 1/2 10 $8,725
AI3NF-407242 40 72 41 1/2 12 $8,275 AI3NF-409642 40 96 41 1/2 12 $8,305 AI3NF-4012042 40 120 41 1/2 12 $9,375
AI3PF-367242 36 72 41 1/2 10 $8,750 AI3PF-369642 36 96 41 1/2 10 $9,255 AI3PF-3612042 36 120 41 1/2 10 $9,840
AI3PF-407242 40 72 41 1/2 12 $9,825 AI3PF-409642 40 96 41 1/2 12 $9,900 AI3PF-4012042 40 120 41 1/2 12 $10,490
AI3EF-367242 36 72 41 1/2 10 $8,750 AI3EF-369642 36 96 41 1/2 10 $9,255 AI3EF-3612042 36 120 41 1/2 10 $9,840
AI3EF-407242 40 72 41 1/2 12 $9,825 AI3EF-409642 40 96 41 1/2 12 $9,900 AI3EF-4012042 40 120 41 1/2 12 $10,490
WoodModule (for powered tables only)
AI3P tables include two flip-up tabletop power modulesTabletop power modules are anodized aluminum.See Module Types option page for option pricing, power module configurations and wiring options.All tables accept an under-table power module in left, center and right positions; specify separatelyNote: inside width clearance is total table width less 9 1/8". Height under table is 37".
Peer • Standing HeightPlain Top • All Woodfor use against a wall
Peer • Standing HeightPlain Top • All Woodfreestanding
Peer • Standing HeightWith Tabletop Power ModulesAll Woodfreestanding
Peer • Standing Height Cutouts for European PowerAll Woodfreestanding
Peer Tables • Standing Height • All Wood
Note: accepts two Pivot 25 power modules from Office Electrics. These power modules are not supplied by Geiger, but can be purchased from Office Electrics. Please go to http://www.oeelectrics.com/en/pivot for details.
02/18 Conference Tables 23
Peer Tables • Desk Height • Laminate Top With Wood SubtopConference Tables
Specify
Shelf BasicProduct Number Depth Width Height Depth Price
WoodModule (for powered tables only)Laminate
AIPWL tables include two flip-up tabletop power modulesTabletop power modules are anodized aluminum.See Module Types option page for option pricing, power module configurations and wiring options.All tables accept an under-table power module in left, center and right positions; specify separatelyInside width clearance is total table width less 9 1/8". Height under table is 25 1/2".
AIWWL-207230 20 72 30 11 7/8 $6,190 AIWWL-209630 20 96 30 11 7/8 $6,455 AIWWL-2012030 20 120 30 11 7/8 $6,680
AINWL-207230 20 72 30 6 $6,550 AINWL-209630 20 96 30 6 $6,805 AINWL-2012030 20 120 30 6 $7,060
AINWL-367230 36 72 30 10 $7,185 AINWL-369630 36 96 30 10 $7,595 AINWL-3612030 36 120 30 10 $8,015
AINWL-407230 40 72 30 12 $7,420 AINWL-409630 40 96 30 12 $8,025 AINWL-4012030 40 120 30 12 $8,520
AIPWL-367230 36 72 30 10 $8,185 AIPWL-369630 36 96 30 10 $8,600 AIPWL-3612030 36 120 30 10 $9,130
AIPWL-407230 40 72 30 12 $8,970 AIPWL-409630 40 96 30 12 $9,040 AIPWL-4012030 40 120 30 12 $9,630
AI3EW-367230 36 72 30 10 $8,185 AI3EW-369630 36 96 30 10 $8,600 AI3EW-3612030 36 120 30 10 $9,130
AI3EW-407230 40 72 30 12 $8,970 AI3EW-409630 40 96 30 12 $9,040 AI3EW-4012030 40 120 30 12 $9,630
Peer • Desk HeightPlain Top • Laminate Top with Wood Subtopfor use against a wall
Peer • Desk HeightPlain Top • Laminate Top with Wood Subtopfreestanding
Peer • Desk Height With Tabletop Power Modules Laminate Top with Wood Subtopfreestanding
Peer • Desk Height Cutouts for European PowerLaminate Top with Wood Subtopfreestanding
Peer Tables • Desk Height • Laminate Top with Wood Subtop
Note: accepts two Pivot 25 power modules from Office Electrics. These power modules are not supplied by Geiger, but can be purchased from Office Electrics. Please go to http://www.oeelectrics.com/en/pivot for details.
Specify
Shelf BasicProduct Number Depth Width Height Depth Price
02/1824 Conference Tables
Peer Tables • Standing Height • Laminate Top With Wood SubtopConference Tables
AIWWL-207242 20 72 41 1/2 11 7/8 $6,745 AIWWL-209642 20 96 41 1/2 11 7/8 $7,040 AIWWL-2012042 20 120 41 1/2 11 7/8 $7,370
AINWL-207242 20 72 41 1/2 6 $6,960 AINWL-209642 20 96 41 1/2 6 $7,220 AINWL-2012042 20 120 41 1/2 6 $7,470
AINWL-367242 36 72 41 1/2 10 $7,735 AINWL-369642 36 96 41 1/2 10 $8,240 AINWL-3612042 36 120 41 1/2 10 $8,725
AINWL-407242 40 72 41 1/2 12 $8,275 AINWL-409642 40 96 41 1/2 12 $8,305 AINWL-4012042 40 120 41 1/2 12 $9,375
AIPWL-367242 36 72 41 1/2 10 $8,750 AIPWL-369642 36 96 41 1/2 10 $9,255 AIPWL-3612042 36 120 41 1/2 10 $9,840
AIPWL-407242 40 72 41 1/2 12 $9,825 AIPWL-409642 40 96 41 1/2 12 $9,900 AIPWL-4012042 40 120 41 1/2 12 $10,490
AI3EW-367242 36 72 41 1/2 10 $8,750 AI3EW-369642 36 96 41 1/2 10 $9,255 AI3EW-3612042 36 120 41 1/2 10 $9,840
AI3EW-407242 40 72 41 1/2 12 $9,825 AI3EW-409642 40 96 41 1/2 12 $9,900 AI3EW-4012042 40 120 41 1/2 12 $10,490
WoodModule (for powered tables only)Laminate
AI3P tables include two flip-up tabletop power modulesTabletop power modules are anodized aluminum.See Module Types option page for option pricing, power module configurations and wiring options.All tables accept an under-table power module in left, center and right positions; specify separatelyInside width clearance is total table width less 9 1/8". Height under table is 37".
Peer • Standing HeightPlain Top • Laminate Top with Wood Subtopfor use against a wall
Peer • Standing HeightPlain Top • Laminate Top with Wood Subtopfreestanding
Peer • Standing HeightWith Tabletop Power ModulesLaminate Top with Wood Subtopfreestanding
Peer • Standing Height Cutouts for European PowerLaminate Top with Wood Subtopfreestanding
Peer Tables • Standing Height • Laminate Top with Wood Subtop
Note: accepts two Pivot 25 power modules from Office Electrics. These power modules are not supplied by Geiger, but can be purchased from Office Electrics. Please go to http://www.oeelectrics.com/en/pivot for details.
02/18 Conference Tables 25
Peer Tables • Desk Height • All LaminateConference Tables
Specify
Shelf BasicProduct Number Depth Width Height Depth Price
Module (for powered tables only)Laminate
AI3P tables include two flip-up tabletop power modulesTabletop power modules are anodized aluminum.See Module Types option page for option pricing, power module configurations and wiring options.All tables accept an under-table power module in left, center and right positions; specify separatelyInside width clearance is total table width less 9 1/8". Height under table is 25 1/2".
AI3WL-207230 20 72 30 11 7/8 $6,190 AI3WL-209630 20 96 30 11 7/8 $6,455 AI3WL-2012030 20 120 30 11 7/8 $6,680
AI3NL-207230 20 72 30 6 $6,550 AI3NL-209630 20 96 30 6 $6,805 AI3NL-2012030 20 120 30 6 $7,060
AI3NL-367230 36 72 30 10 $7,185 AI3NL-369630 36 96 30 10 $7,595 AI3NL-3612030 36 120 30 10 $8,015
AI3NL-407230 40 72 30 12 $7,420 AI3NL-409630 40 96 30 12 $8,025 AI3NL-4012030 40 120 30 12 $8,520
AI3PL-367230 36 72 30 10 $8,185 AI3PL-369630 36 96 30 10 $8,600 AI3PL-3612030 36 120 30 10 $9,130
AI3PL-407230 40 72 30 12 $8,970 AI3PL-409630 40 96 30 12 $9,040 AI3PL-4012030 40 120 30 12 $9,630
AI3EL-367230 36 72 30 10 $8,185 AI3EL-369630 36 96 30 10 $8,600 AI3EL-3612030 36 120 30 10 $9,130
AI3EL-407230 40 72 30 12 $8,970 AI3EL-409630 40 96 30 12 $9,040 AI3EL-4012030 40 120 30 12 $9,630
Peer • Desk HeightPlain Top • All Laminate for use against a wall
Peer • Desk HeightPlain Top • All Laminatefreestanding
Peer • Desk Height With Tabletop Power Modules All Laminatefreestanding
Peer • Desk Height Cutouts for European PowerAll Laminatefreestanding
Peer Tables • Desk Height • All Laminate
Note: accepts two Pivot 25 power modules from Office Electrics. These power modules are not supplied by Geiger, but can be purchased from Office Electrics. Please go to http://www.oeelectrics.com/en/pivot for details.
Specify
Shelf BasicProduct Number Depth Width Height Depth Price
02/1826 Conference Tables
Peer Tables • Standing Height • All LaminateConference Tables
AI3WL-207242 20 72 41 1/2 11 7/8 $6,745 AI3WL-209642 20 96 41 1/2 11 7/8 $7,040 AI3WL-2012042 20 120 41 1/2 11 7/8 $7,370
AI3NL-207242 20 72 41 1/2 6 $6,960 AI3NL-209642 20 96 41 1/2 6 $7,220 AI3NL-2012042 20 120 41 1/2 6 $7,470
AI3NL-367242 36 72 41 1/2 10 $7,735 AI3NL-369642 36 96 41 1/2 10 $8,240 AI3NL-3612042 36 120 41 1/2 10 $8,725
AI3NL-407242 40 72 41 1/2 12 $8,275 AI3NL-409642 40 96 41 1/2 12 $8,305 AI3NL-4012042 40 120 41 1/2 12 $9,375
AI3PL-367242 36 72 41 1/2 10 $8,750 AI3PL-369642 36 96 41 1/2 10 $9,255 AI3PL-3612042 36 120 41 1/2 10 $9,840
AI3PL-407242 40 72 41 1/2 12 $9,825 AI3PL-409642 40 96 41 1/2 12 $9,900 AI3PL-4012042 40 120 41 1/2 12 $10,490
AI3EL-367242 36 72 41 1/2 10 $8,750 AI3EL-369642 36 96 41 1/2 10 $9,255 AI3EL-3612042 36 120 41 1/2 10 $9,840
AI3EL-407242 40 72 41 1/2 12 $9,825 AI3EL-409642 40 96 41 1/2 12 $9,900 AI3EL-4012042 40 120 41 1/2 12 $10,490
Module (for powered tables only)Laminate
AI3P tables include two flip-up tabletop power modulesTabletop power modules are anodized aluminum.See Module Types option page for option pricing, power module configurations and wiring options.All tables accept an under-table power module in left, center and right positions; specify separatelyInside width clearance is total table width less 9 1/8". Height under table is 37".
Peer • Standing HeightPlain Top • All Laminatefor use against a wall
Peer • Standing HeightPlain Top • All Laminatefreestanding
Peer • Standing HeightWith Tabletop Power ModulesAll Laminatefreestanding
Peer • Standing Height Cutouts for European PowerAll Laminatefreestanding
Peer Tables • Standing Height • All Laminate
Note: accepts two Pivot 25 power modules from Office Electrics. These power modules are not supplied by Geiger, but can be purchased from Office Electrics. Please go to http://www.oeelectrics.com/en/pivot for details.
02/18
Product Number Page Product Number Page Product Number Page Product Number Page
Conference Tables 27
IndexConference Tables
Conference Tables02/18
Conference TablesIndex
ACF1.................................. 13AI3EF .......................... 21, 22AI3EL .......................... 25, 26AI3EW......................... 23, 24AI3NF.......................... 21, 22AI3NL .......................... 25, 26
AI3NW ........................ 21, 22AI3PF .......................... 21, 22AI3PL .......................... 25, 26AI3UP ................................ 20AI3WL ......................... 25, 26AINWL ........................ 23, 24
AIPWL......................... 23, 24AIWWL ........................ 23, 24APT1 .................................. 14APT2 .................................. 16APT3M ............................... 15APT3R ............................... 15
APT4 ........................... 17, 18APT5M ............................... 14APT5R ............................... 14APT6 .................................. 16APT8 .................................. 17
02/1828 Conference Tables
Conference Tables
© 2018 Geiger International, Inc. All rights reserved.
® Geiger International and Peer are registered trademarks of Geiger International, Inc., and/or of its independent designers.
® UL is a registered trademark of Underwriters' Laboratories, Inc.
™ The Geiger logo, Nerve Center, Café, Peer, Round Series, Square Series, Stern and are trademarks of Geiger International, Inc., and/or of its independent designers.