Configuring your Phone

Quick Installation Guide

Configuration of the phone is centrally managed from the Zultys MX IP phone system. For most deployments the phone will receive an IP address from the DHCP server on the local network. For the phone to automatically download its configuration information the DHCP server must have Option 66 enabled and configured with the address of the Zultys MX IP phone system. For further information about configuration of the phone please refer to theZIP 35i Administration Manual.

For more information, refer to ZIP 35i User Guide. 96-35351-01

Wall Mount Drilling Template

Drill two holes vertically spaced 80mm/3.15” apart.

After the IP phone is connected to the networkand supplied with power, it automaticallybegins a process of initializing on the networkand downloading it's configuration information.Contact your system administrator if the phonefails to register with the IP phone system.

Startup

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

ZIP 35i Business Phone

Welcome

... Initializing ...Please Wait

80mm/3.15”

Stand &Wall Mount

Power Adapter (optional)

Handset Cord

HandsetIP Phone

Ethernet Cable Quick Installation & Quick Reference

PC Connection (Optional)

IEEE 802.3af compliant PoE Switch

You have two options for network and power connections. Your system administrator will advise you on which one to use.

Power Adapter (DC 5V)

PC Connection (Optional)

ZIP 33i Quick Installation

1. Attach the stand, as shown below:

2. Programmable Key Label Installation

4. Connect the network and power, as shown below:

a. AC Power Option

b. PoE (Power over Ethernet) Option

The following items are included in your package. The power adapter is optional. If you find anything missing, contact your system administrator.

Packing List

Assembling the Phone

Note: If the PoE (Power over Ethernet) option is used, the power adapter is not required.

Desk Mount Method

Wall Mount Method

Network

ZIP 33i Quick Installation

Key Label Set

Note: Headset purchased separately.

3. Connect the handset and optional headset, as shown below:

A set of pre-printed labels for the programmable keys is provided. To change the installed label remove the clear plastic cover using a paper clip or similar, insert the required label followed by the clear plastic cover.