1

10th Congress in Japan

IGTC’11 Osaka International Gas Turbine Congress 2011 Osaka

November 13(Sun) - 18(Fri)

Tentative Program Session ID Number / Title Date / Time Room Paper# / Paper Title Corresponding Author / Family name Given name Affiliation Authors/ Family name 1 Given name 1 Affiliation 1

/ Family name 2 Given name 2 Affiliation 2 AD(1) Aerodynamics of Axial Compressor I Nov.15(Tuesday) 9:30-11:00 Conference Hall #030 Detail Flow Field Investigation of an Axial Flow Compressor at Windmill Condition Imaeda Motohiro (IHI Corporation) Imaeda Motohiro (IHI Corporation) Kato Dai (IHI Corporation) Ohta Yutaka (Waseda University) Totani Goh (Waseda University) Outa Eisuke (Waseda University)

As of Sept. 13.2011

2

#064 Three-Dimensional Numerical Simulation on Flow Field and Casing Optimization of an Eleven-stage Axial Compressor Zhao Lianhui (Shanghai Electric Power Generation Group) Zhao Lianhui (Shanghai Electric Power Generation Group) He Lei (Shanghai Electric Power Generation Group) Cui Yaoxin (Shanghai Electric Power Generation Equipment CO., LTD. ) Hu Yu (Shanghai Electric Power Generation Equipment CO., LTD. ) Xu Qiang (Shanghai Electric Power Generation Group) #055 Multi-Objective Optimization of Three-Dimensional Blade Shape for an Axial Compressor Rotor in Transonic Stage Chihiro Myoren (Hitachi, Ltd.) Chihiro Myoren (Hitachi, Ltd. Energy and Environmental Systems Laboratory) Yasuo Takahashi (Hitachi, Ltd. Energy and Environmental Systems Laboratory) Yasuhiro Kato (Hitachi, Ltd. Energy and Environmental Systems Laboratory) AD(2) Aerodynamics of Axial Compressor II Nov.15(Tuesday) 11:20-12:50 Conference Hall #056 Effects of Tip Leakage Vortex Breakdown on Unsteady Flow Fields at Near-Stall Condition in a Low-Speed Axial Flow Compressor Rotor with Large Tip Clearance Yamada Kazutoyo (Kyushu University) Yamada Kazutoyo (Kyushu University Hiroaki Kikuta (Kyushu University) Masato Furukawa (Kyushu University) Satoshi Gunjishima (Kyushu University) #046 Span-wise Mixing Prediction by Unsteady Multistage Simulation for a Transonic Axial Compressor Yamagami Mai (IHI corporation) Yamagami Mai (IHI corporation) Kodama Hidekazu (IHI corporation) Tsuchiya Naoki (IHI corporation) Kazawa Junichi J (axa) #136 Development of a Highly Loaded Axial Flow Compressor for Small Core Size Aircraft Engines Kato Dai (IHI Corporation)

3

Kato Dai (IHI Corporation) Pallot Guillaume (IHI Corporation) Sato Daisuke (IHI Corporation ) Yamagami Mai (IHI Corporation) Kodama Hidekazu (IHI Corporation) AD(3) Aerodynamics of Axial Compressor III Nov.16(Wednesday) 9:30-11:00 Conference Hall #044 Direct Integration Method in Flutter Analysis of IV Standard Configuration Cascade) Rzadkowski Romuald (The Szewalski Institute of Fluid Flow Machinery, Polish Academy of Sciences, G dansk) Rzadkowski Romuald (The Szewalski Institute of Fluid Flow Machinery) Kubitz Leszek (Polish Naval Academy) #050 Unsteady Forces Acting on Rotor Blades in Five and Half Compressor Stage Rzadkowski Romuald (The Szewalski Institute of Fluid Flow Machinery) Rzadkowski Romuald (The Szewalski Institute of Fluid Flow Machinery) Gnesin Vitaly (Institute of Mechanical Engineering Problems, National Academy of Sciences of Ukraine) Kolodyazhnaya Luba (Institute of Mechanical Engineering Problems, National Academy of Sciences of Ukraine) #106 Numerical Calculation of the Riblet-Effect on Compressor Blades and Validation with Experimental Results Lietmeyer Christoph (Institute of Turbomachinery and Fluid Dynamics, Leibniz Universi ty of Hannover) Lietmeyer Christoph (Institute of Turbomachinery and Fluid Dynamics, Leibniz Universi ty of Hannover) Seume Joerg R. (Institute of Turbomachinery and Fluid Dynamics, Leibniz Universi ty of Hannover) AD(4) Aerodynamics of Axial Compressor IV Nov.16(Wednesday) 11:20-12:50 Conference Hall #0220 Streamwise Evolution of Loss in a Shrouded Axial Compressor Cascade Kim Jin Wook (Seoul National University) Kim Jin Wook (Seoul National University) Kim Tongbeum (University of the Witwatersrand) Song Seung Jin (Seoul National University)

4

#108 An Integrated Total Pressure and Total Temperature Probe for Local Entropy Measurement Wang Yongsheng (Institute of Engineering Thermophysics, Chinese Academy of Sciences) Wang Yongsheng (Institute of Engineering Thermophysics, Chinese Academy of Sciences) Lin Feng (Institute of Engineering Thermophysics, Chinese Academy of Sciences) AD(5) Aerodynamics of Radial Compressor I Nov.17(Thursday) 9:30-11:00 Conference Hall #035 Waveguide Pressure Measuring System and Surge Analysis in a Two-stage High Speed Centrifugal Compressor Gao Chuang (Shanghai Advanced Research Institute, Chinese Academy of Science s) Gao Chuang (Shanghai Advanced Research Institute, Chinese Academy of Science s) Huang Weiguang #040 Effects of Impeller-Diffuser Radial Gap on Unsteady Flow Fields in a Centrifugal Compressor with Vaned Diffuser Goto Takashi (Waseda Univeristy) Goto Takashi (Waseda University) Ohta Yutaka (Waseda University) Outa Eisuke (Waseda University) #160 Characteristics of Rotating Stall in a Centrifugal Compressor with a Vaneless Diffuser Kyung Jun Kang (Korea Atomic Energy Reasearch Institute, Researcher) Kyung Jun Kang (Researcher) AD(6) Aerodynamics of Radial Compressor II Nov.17(Thursday) 11:20-12:50 Conference Hall #165 Design Optimization of Low Solidity Vaned Diffusers for Centrifugal Compressors Using a Multi-objective Genetic Algorithm Shibata Takanori (Hitachi, Ltd.) Shibata Takanori (Hitachi, Ltd.) Yagi Manabu (Hitachi, Ltd.) Nishida Hideo (Hitachi Plant Technologies, Ltd.) Kobayashi Hiromi (Hitachi Plant Technologies, Ltd.)

5

Tanaka Masanori (Hitachi Plant Technologies, Ltd.) #174 Numerical Optimization Design of the Centrifugal Compressor Scroll Volute Coupled with Impeller and Vaneless Diffuser Yuan Xin (Key Laboratory for Thermal Science and Power Engineering of Ministry of Education, Tsinghua University) Qi Shibo (Key Laboratory for Thermal Science and Power Engineering of Ministry of Education, Tsinghua University) #252 Impeller Design for Centrifugal Compressor Amano Ryo (University of Wisconsin-Milwaukee) Amano Ryo (UWM) Xu Cheng (UWM) AD(7) Aerodynamics of Turbine I Nov.14(Monday) 11:40-13:10 Room1202 #020 Hot Streak Shaping and Migration in an Axial Turbine Regina Kai (Swiss Federal Institute of Technology) Regina Kai (Swiss Federal Institute of Technology ) Basol Altug (Swiss Federal Institute of Technology ) Jenny Philipp (Swiss Federal Institute of Technology) Kalfas Anestis I. (Swiss Federal Institute of Technology) Abhari Reza S. (Swiss Federal Institute of Technology) #194 Numerical Investigation of the Interaction between Probe, Flow and Blading in an Axial-Turbine Herbst Florian (Institute of Turbomachinery and Fluid Dynamics, Leibniz University Hannover) Herbst Florian (Institute of Turbomachinery and Fluid Dynamics, Leibniz University Hannover) Fakiolas Efstratios (Institute of Turbomachinery and Fluid Dynamics, Leibniz University Hannover) Bluemel Sven (Institute of Turbomachinery and Fluid Dynamics, Leibniz University Hannover) Seume Joerg (Institute of Turbomachinery and Fluid Dynamics, Leibniz University Hannover) #162 Validation and Development of Models for Optimum Wheel Flow Angles at In- and Outlet of Small Size Radial Turbines Suhrmann Jan-Friedrich (TU-Berlin) Suhrmann Jan-Friedrich (TU-Berlin) Peitsch Dieter (TU-Berlin) Gugau Marc (BorgWarner Turbo Systems Engineering GmbH)

6

Heuer Tom (BorgWarner Turbo Systems Engineering GmbH) Tomm Uwe (BorgWarner Turbo Systems Engineering GmbH) AD(8) Aerodynamics of Turbine II Nov.14(Monday) 14:30-16:00 Room1202 #007 Integrated Environment for Gas Turbine Design Grebennik Kirill (SoftinWay Inc). Leonid Moroz (SoftInWay Inc.) Pagur Petr (SoftInWay Inc) #063 Studies on the Flow Fields around Two Types of LPT Cascade with Different Loading Designs: Midspan and Secondary Loss Funazaki Ken-ichi (Iwate University) Funazaki Ken-ichi (Iwate University) Okamura Kazuki (Iwate University) Sato Yasukuni (Iwate University) Hamabe Masaaki (IHI) #076 Improving Performance of a High Work Turbine Using Non-Axisymmetric Endwall Miyoshi Ichiro (Hitachi, Ltd) Miyoshi Ichiro (Hitachi, Ltd) Shin’ichi Higuchi (Hitachi, Ltd) AD(9) Aerodynamics of Turbine III Nov.14(Monday) 16:20-17:50 Room1202 #125 Development of an Unsteady Multi-species Transonic Flow Numerical Method for Internal Flows in the Turbine Yuan Xin (Key Laboratory for Thermal Science and Power Enginnering of Ministry of Education, Tsinghua University ) Wang Zhong Nan (Key Laboratory for Thermal Science and Power Enginnering of Ministry of Education, Tsinghua University) Lin Zhi Rong (Key Laboratory for Thermal Science and Power Enginnering of Ministry of Education, Tsinghua University) Yuan Xin (Key Laboratory for Thermal Science and Power Enginnering of Ministry of Education, Tsinghua University) #113 Optimization of Secondary Flow Loss Reduction of High Loaded Gas Turbine Cascade

7

Tamagawa Toru (Osaka Institute of Technology) Tamagawa Toru (Osaka Institute of Technology) Kawata Yutaka (Osaka Institute of Technology) Oto Masao (Osaka Institute of Technology) Fuzimoto Daichi (Osaka Institute of Technology) #117 Effects of Rotor Tip Leakage on the Unsteady Flow Fields of Stator Blade in a One and Half Turbine Stages Li Jun (Xi'an Jiaotong University) Li Jun (Xi'an Jiaotong University) Yan Xin (Xi'an Jiaotong University) Kong Shengru (Xi'an Jiaotong University) Song Liming (Xi'an Jiaotong University) Feng Zhenping (Xi'an Jiaotong University) AD(10) Aerodynamics of Turbine IV Nov.15(Tuesday) 9:30-11:00 Room1202 #175 Time Resolved Full-Annulus Computations of a Turbine with Inhomogeneous Inlet Conditions Adamczuk Rafael (University of Hannover) Adamczuk Rafael (University of Hannover) Seume J$(D+Srg (University of Hannover) #215 Aero and Aero-thermal Characteristics of Turbine Rotor Blade’s Platforms Sakamoto Yasuro (Mitsubishi Heavy Industries, Ltd) Sakamoto Yasuro (Mitsubishi Heavy Industries, Ltd) Ito Eisaku (Mitsubishi Heavy Industries, Ltd) Nakamura Takeshi (Mitsubishi Heavy Industries, Ltd) #248 Two- and Three-dimensional Numerical Analysis on Stator-Rotor Interactions in a Supersonic Turbine Kai Takeshi (Tokyo University) Kai Takeshi (Tokyo University) Okamoto Koji (Tokyo University) Teramoto Susumu (Tokyo University)

8

AD(11) Aerodynamics of Turbine V Nov.15(Tuesday) 11:20-12:50 Room1202 #254 Transition Mechanisms in Laminar Separated Flow under Unsteady Main Flow Conditions - Part I: Steady Flowfield Lyko Christoph (Technical University of Berlin, Institute for Aeronautics and As tronautics) Lyko Christoph (Technical University of Berlin) Daehnert Jerrit (Technical University of Berlin) Peitsch Dieter (Technical University of Berlin) #255 Transition Mechanisms in Laminar Separated Flow under Unsteady Main Flow Conditions - Part II: Unsteady Flowfield Lyko Christoph (Technical University of Berlin, Institute for Aeronautics and As tronautics) Lyko Christoph (Technical University of Berlin) Daehnert Jerrit (Technical University of Berlin) Peitsch Dieter (Technical University of Berlin) #152 Secondary Flows and Coolant Film Interaction of High Subsonic Cascade Mahadevan Srikrishna (Center for Advanced Turbines and Energy Research, Laboratory for Turbine Aerodynamics, Heat Transfer, and Durability, University of Central Florida) Mahadevan Srikrishna (CATER/FCAAP, University of Central Florida) Golsen Matthew (CATER/FCAAP, University of Central Florida ) Casey Tim (CATER/FCAAP, University of Central Florida) Ricklick Mark A. (CATER/FCAAP, University of Central Florida) Kapat JayantaS (CATER/FCAAP, University of Central Florida) AD(12) Computational Fluid Dynamics I Nov.16(Wednesday) 9:30-11:00 Room1202 #072 Speeding up the CFD Process Favaretto CF (Cambridge Flow Solutions Ltd) Favaretto C.F. (Cambridge Flow Solutions Ltd) Dawes W.N . (Cambridge University Engineering Department Kellar W.P. (Cambridge Flow Solutions Ltd)

9

#114 Numerical Investigations on the Leakage Flow Characteristics of Different Honeycomb Seal Configurations Li Jun (Xi'an Jiaotong University) Li Jun (Xi'an Jiaotong University) Li Shaojun (Xi'an Jiaotong University) Yan Xin (Xi'an Jiaotong University) Song Liming (Xi'an Jiaotong University) Feng Zhenping (Xi'an Jiaotong University) #221 Modeling for Prediction of Very Short Ejector Performance Im Ju Hyun (Seoul National University) Im Ju Hyun (Seoul National University) Song Seung Jin (Seoul National University) AD(13) Computational Fluid Dynamics II Nov.16(Wednesday) 11:20-12:50 Room1202 #205 Numerical Simulation of a Mixed Flow Compressor at Windmill Noji Yuya (Waseda University) Noji Yuya (Waseda University) Ogawa Masamichi (Waseda University Sato Tetsuya (Waseda University) Masaki Daisaku (Japan Aerospace Exploration Agency) Taguchi Hideyuki (Japan Aerospace Exploration Agency) #239 CFD Analysis of a Variable Nozzle Turbine for Automotive Turbocharger Considering Actual Geometries Yamagata Akihiro (IHI Corporation) Yamagata Akihiro (IHI Corporation) GS: Aerodynamics (AD) #241 Numerical Simulation of Icing Phenomena in Fan Rotor/Stator Interaction Field Hayashi Ryousuke (Tokyo University of Science, Graduate School of Mechanical Engineering) Hayashi Ryousuke (Tokyo University of Science, Graduate School of mechanical Engineering) Kawakami Kei (Tokyo University of Science, Graduate School of Mechanical Engineering

10

Suzuki Masaya (Tokyo Unoversity of Science) Yamamoto Makoto (Tokyo University of Science) AD(14) Aerodynamic Design Nov.17(ThuRsday) 9:30-11:00 Room1202 #135 Wide Chord Study in Turbo Machinery (The First Report) Satoshi Ohtsuki (HORIBA,Ltd). Satoshi Ohtsuki ‘ (HORIBA,Ltd). #201 Investigation on Diffuser Design in Tesla Compression Device Wang Baotong (The University of Tokyo) Wang Baotong (Department of Advanced Energy, Graduate School of Frontier Science, The University of Tokyo) Okamoto Koji (Department of Advanced Energy, Graduate School of Frontier Science, The University of Tokyo) Teramoto Susumu (Department of Aeronautics and Astronautics, School of Engineering, The University of Tokyo) #127 Design and Numerical Investigation of High-Through-Flow Transonic Fans with Swept and Straight Blade Gui XingMin (Beijing University of Aeronautics and Astronautics) Fang Zhu (Buaa) Dong Hai (Jin Buaa) XingMin Gui (Buaa) CB(1) Fuel Nov.15(Tuesday) 11:20-12:50 Room1008 #013 Alternative Fuels for Aviation Gas Turbine Engines: Operating Properties and Transport Efficiency of Aircrafts Yanovskiy Leonid (Central Institute of Aviation Motors) Yanovskiy Leonid (Central Institute of Aviation Motors) Raznovschikov Vladimir (Central Institute of Aviation Motors) #092 Development of Biogas Combustor for a Small Size Industrial Gas Turbine Chun Jaechul (Doosan Heavy Industries & Construction Co., Ltd) Chun Jaechul (Doosan Heavy Industries & Construction Co., Ltd)

11

Kim Ho Keun (Doosan Heavy Industries & Construction Co., Ltd) Im Ji-Hyuk (Doosan Heavy Industries & Construction Co., Ltd) An Yunho (Doosan Heavy Industries & Construction Co., Ltd) Choe Jinhoon (Doosan Heavy Industries & Construction Co., Ltd) #171 Biodiesel and its Blends with Kerosene as an Alternative Fuel in Low NOx Gas Turbine Combustor Altaher Mohamed (Leeds University) Altaher Mohamed (Leeds University) Li Hu (Leeds University) Andrews Gordon (Leeds University) CB(2) Emission I Nov.16(Wednesday) 9:30-11:00 Room1008 #038 An Emissions Model for NOx and CO Emission Trends from Industrial Gas Turbines Samaras Christos (Cranfield University, Aristotle University Of Thessaloniki) Samaras Christos (Cranfield University, Aristotle University Of Thessaloniki) Di Lorenzo Giuseppina (Cranfield University) Kalfas Anestis (Aristotle University Of Thessaloniki) Pilidis Pericles (Cranfield University) #142 Effects of Pressure on Prompt NOX Formation Characteristics in Premixed Flame Hayashi Jun (Osaka University) Hayashi Jun (Osaka University) Nakatsuka Noriaki (Osaka University) Shiga Yuuichi (Osaka University) Hiroyuki Kashihara (Kawasaki Heavy Industry) Akamatsu Fumiteru (Osaka University) #232 Simple Low NOx Combustor Technology for Environmentally Compatible Engine （ECO Engine) Tomohiro Ide (IHI Corporation) Ide Tomohiro (IHI Corporation) Hiromitsu Nagayoshi (HI Corporation) Hosoi Jun (IHI Corporation )

12

GS: Combustion (CB) CB(3) Emission II Nov.16(Wednesday) 11:20-12:50 Room1008 #101 Effect of Wall Fuel Injection Configuration on Emissions Using Low NOx Radial Swirl Combustor Altaher Mohamed (Leeds University) Altaher Mohamed (Leeds University) Andrews Gordon (Leeds University) Li Hu (Leeds University) #237 Dependence of Soot Yield on Pressure of Gaseous Fuels in Diffusion Flames Gulder Omer (University of Toronto, Institute for Aerospace Studies) Gulder Omer (University of Toronto) Intasopa Gorngrit (University of Toronto) Vaillancourt Marie (University of Toronto) Mandatori Paul (University of Toronto) Joo Hyun (University of Toronto) #084 Numerical Prediction of NOx in Gasturbine Combustor Matsuya Kyohei (Hokkaido University) YAMAMOTO Tomonori (Hokkaido University) NISHIDA Shingo (Hokkaido University) Oshima Nobuyuki (Hokkaido University) NONAKA Yoshiharu (Kawasaki Heavy Industries,Ltd) HIRANO Kohshi _Kawasaki Heavy Industries,Ltd CB(4) Combustion Phenomena I Nov.17(Thursday) 9:30-11:00 Room1008 #043 Effect of Ambient Pressure on Spray Jet Flame Behavior Kurose Ryoichi (Kyoto University) Kitano Tomoaki (Kyoto University)

13

Nakatani Tomoaki (Kyoto University) Kurose Ryoichi (Kyoto University) Kurose Ryoichi (Kyoto University) #059 Investigation of Spray Combustion Field with Swirl Flow in a Lab-Scale Aircraft Gas Turbine Combustor in a Lab-Scale Aircraft Gas Turbine Combustor Tainaka Kazuki (Osaka University) Tainaka Kazuki (Osaka University) Hayashi Jun (Osaka University) Moriai Hideki (Mitsubishi Heavy Industries, Ltd.) Nakatsuka Noriaki (Osaka University) Akamatsu Fumiteru (Osaka University) #129 Detailed Laser-based Investigation of a Laboratory Scale Liquid Fuel Burner Zimmer Laurent (EM2C Laboratory, CNRS-Ecole Centrale Paris) Zimmer Laurent (EM2C) Providakis Theodore (EM2C) Scouflaire Philippe (EM2C) Ducruix Sebastien (EM2C) CB(5) Combustion Phenomena II Nov.17(Thursday) 11:20-12:50 Room1008 #209 An Experimental Study on the Flashback Phenomena of Premixed Combustors using Swirling Flow Ogawa Yohei (Osaka University) Ogawa Yohei (Osaka University) Masaharu Komiyama (Osaka University) Kenichiro Takeishi (Osaka University) #235 Effects of Combustor Exit Area on Combustion Characteristics of a Propane-fueled Annular Combustor for a Several Hundred W-class Micro Gas Turbine Sakurai Takashi (Tokyo Metropolitan University) Sakurai Takashi (Tokyo Metropolitan University) Yuasa Saburo (Tokyo Metropolitan University) Haga Makoto (Tokyo Metropolitan University) Abe Hiroshi (Tokyo Metropolitan University)

14

#224 PIV Measurement in Gas Turbine Combustor Model Yarita Yoshihiro (Gunma University) Yarita Yoshihiro (Gunma University) Endo Yuto (Gunma University) Ide Tomohiro (IHI Coporation) Hiromitsu Nagayoshi (IHI Coporation) Kawashima Hisanobu (Gunma University) CB（6） Development of Combustor I Nov.14(Monday) 11:40-13:10 Room1007 #068 Investigations of a Staged Fuel Nozzle for Aeroengines by Single-Sector and Multi-Sector Combustor Tests Yamamoto Takeshi (Japan Aerospace Exploration Agency) Yamamoto Takeshi (JAXA) Shimodaira Kazuo (JAXA) Kurosawa Yoji (JAXA) Matsuura Kazuaki (JAXA) Yoshida Seiji (JAXA) #179 Design and Verification Test Result of Air Cooled Combustor for Mitsubishi G Class Gas Turbine Sato Kenji (Mitsubishi Heavy Industries, Ltd Takasago Machinery Works.) Tsukagoshi Keizo (Mitsubishi Heavy Industries, Ltd Takasago Machinery Works.) Tanaka Katsunori (Mitsubishi Heavy Industries, Ltd Takasago Machinery Works.) Nishida Koichi (Mitsubishi Heavy Industries, Ltd Takasago Machinery Works.) Akamatsu Shinji (Mitsubishi Heavy Industries, Ltd Takasago Machinery Works.) Sato Kenji (Mitsubishi Heavy Industries, Ltd Takasago Machinery Works.) #182 Single NOx DLE Combustion System for KAWASAKI M7A-03 Green Gas Turbine Matsumoto Kiyoshi (Kawasaki Heavy Industries, LTD.) Matsumoto Kiyoshi (KHI) Oda Takeo (KHI) Toyota Satoshi (KHI) Ogata Masahiro (KHI)

15

Kinoshita Yasuhiro (KHI) CB（7） Development of Combustor II Nov.14(Monday) 14:30-16:00 Room1007 #217 Development of Combustor with Exhaust Gas Recirculation System Takiguchi Satoshi (Takasago Research & Development Center, Mitsubishi Heavy Industries, Ltd.) Takiguchi Satoshi (Takasago Research & Development Center, Mitsubishi Heavy Industries, Ltd.) Saitoh Keijiro (Takasago Research & Development Center, Mitsubishi Heavy Industries, Ltd.) Ito Eisaku (Takasago Research & Development Center, Mitsubishi Heavy Industries, Ltd.) Nishida Koichi Takasago( MachineryWorks, Mitsubishi Heavy Industries, Ltd.) Tanaka Katsunori (Takasago MachineryWorks, Mitsubishi Heavy Industries, Ltd.) #236 Development and Preliminary Performance Evaluation of a Multi Swirl Airblast Burner with Multi Fuel-Film Annuli Matsuura Kazuaki (Japan Aerospace Exploration Agency) Suzuki Takashi (Waseda University) Yoshiura Yasutaro (Hosei University) Ishikawa Tomoki (Hosei University) Matsuura Kazuaki (Japan Aerospace Exploration Agency) Iino Jun (Japan Aerospace Exploration Agency) #184 Development of a Lean Staged Combustor in ECO Engine Project Matsuyama Ryusuke (Kawasaki Heavy Industries, Ltd.) Matsuyama Ryusuke (Kawasaki Heavy Industries, Ltd.) Kobayashi Masayoshi (Kawasaki Heavy Industries, Ltd. ) Ogata Hideki (Kawasaki Heavy Industries, Ltd.) Horikawa Atsushi (Kawasaki Heavy Industries, Ltd.) Kinoshita Yasuhiro (Kawasaki Heavy Industries, Ltd.) #187 Improvement on Light around Characteristics of a Lean Staged Fuel Spray Nozzle (The Second Report) Kobayashi Masayoshi (Kawasaki Heavy Industries,Ltd.) Kobayashi Masayoshi (Kawasaki Heavy Industries,Ltd.) Matsuyama Ryusuke (Kawasaki Heavy Industries,Ltd ) Horikawa Atsushi (Kawasaki Heavy Industries,Ltd )

16

Fujiwara Hitoshi (JAXA) CB(8) Atomization and Ignition Nov.14(Monday) 16:20-17:50 Room1007 #081 Atomization of Liquid Jet by Surrounding Fast Gas Stream Inoue Chihiro (University of Tokyo) Inoue Chihiro (University of Tokyo) Watanabe Toshinori (University of Tokyo) Himeno Takehiro (University of Tokyo) Koishi Akifumi (Faculty of Engineering, University of Tokyo) Uzawa Seiji (University of Tokyo) #145 Study of Laser Induced Ignition for Combustible Mixtures with Pico-Second Pulse Duration Laser Hayashi Jun (Osaka University) Hayashi Jun (Osaka Univ.) Furui Kenji (Osaka Univ.) Okada Tomoki (Osaka Univ.) Nakatsuka Noriaki (Osaka Univ.) Akamatsu Fumiteru (Osaka Univ.) #223 Ignition Characteristics in Transient Spray by Laser-Induced Plasma Kawahara Nobuyuki (Okayama University) Kawahara Nobuyuki (Okayama Univ.) Tomita Eiji (Okayama Univ.) Nakamura Shinya (Okayama Univ.) CB(9) Numerical Simulation of Combustion I Nov.15(Tuesday) 11:20-12:50 Room1007 #027 A Coupled Combustion CFD Analysis of an Aircraft Gas Turbine Combustion Chamber Complete with Effusion Cooling Holes Murata Kouji (Honda R&D Co., Ltd. Aircraft Engine R&D Center) Murata Kouji (Honda R&D Co., Ltd. Aircraft Engine R&D Center)

17

Shibata Ryosuke (Honda R&D Co., Ltd. Aircraft Engine R&D Center) Yadomaru Go (Honda R&D Co., Ltd. Aircraft Engine R&D Center) #066 Large-Eddy Simulation of a Spray Combustion Field in a Scaled Sector Model for a Jet Engine Combustor Moriai Hideki (Mitsubishi Heavy Industries, Ltd.) Moriai Hideki (MHI, Kyoto University) Kurose Ryoichi (Kyoto University) Komori Satoru (Kyoto University) Amatsu Fumiteru (Osaka University) #134 Numerical Study of Syngas Premixed Flame Structure Yousefian Najafabadi Sajjad (MAPNA Turbine Engineering & Manufacturing Company (TUGA)) Yousefian Najafabadi Sajjad (MAPNA Turbine Engineering & Manufacturing Company (TUGA)) Ghafourian Akbar (Sharif University of Technology) Darbandi Masoud (Sharif University of Technology) CB(10) Numerical Simulation of Combustion II Nov.16(Wednesday) 9:30-11:00 Room1007 #071 Numerical Investigation of Air-Blasted Liquid Sheet Dynamics Koizumi Kazuya (Graduate School of Keio University) Koizumi Kazuya (Graduate School of Keio University) Matsuo Akiko (Keio University ) Horikawa Atsushi (Kawasaki Heavy Industries, Ltd.) Nonaka Yoshiharu (Kawasaki Heavy Industries, Ltd) #256 Assisting Clean Engine Design with Accurate Simulation of Real Fuel Behavior in Gas Turbine Combustors Drennan Scott (Reaction Design) Drennan Scott (Reaction Design) DO(1) Development and Operation I Nov.16(Wednesday) 11:20-12:50 Room1007

18

#005 Outline of conversion to Gas Turbine Combined Cycle system at Mizushima Thermal Power Station #1 Kim Kyoichi (The Chugoku Electric Power Co.,Inc.) Nakanishi Kyoichi (The Chugoku Electric Power Co.,Inc.) Ogawa Hisanobu (The Chugoku Electric Power Co.,Inc.) Ashitani Shigeru (The Chugoku Electric Power Co.,Inc.) #021 The Work of Replacement for the Higher Efficiency Gas Turbine Yoshigai Hideki (Kyushu electric power co.,inc.) Yoshigai Hideki (Thermal power department) Shiga Eiichi (Thermal power department) Kamimasu Masanori (Thermal power department) #067 Application of Advanced Gas Turbine on Replacement of Sendai Thermal Power Station Unit No.4 Esashi Kei (Tohoku Electric Power Co.,Inc) Esashi Kei (Tohoku Electric Power Co.,Inc) Sato Koji (Tohoku Electric Power Co.,Inc) Ando Ikuo (Tohoku Electric Power Co.,Inc) Fujita Norio (Tohoku Electric Power Co.,Inc) . DO(2) Development and Operation II Nov.17(Thursday) 9:30-11:00 Room1007 #051 Deveopment of 1.7MW Class High Efficiency Gas Turbine M1A-17 Yamasaki Yoshihiro (Kawasaki Heavy Industries, LTD.) Hosokawa Yasufumi (Kawasaki Heavy Industries, LTD.) Gouda Makoto (Kawasaki Heavy Industries, LTD.) Yamasaki Yoshihiro (Kawasaki Heavy Industries, LTD) Norimoto Atsushi (Kawasaki Heavy Industries, LTD) #025 MAN’s New Gas Turbine in the 6 MW-Class Wiedermann Alexander (MAN Diesel and Turbo SE) Wiedermann Alexander (MAN Diesel and Turbo) Beukenberg Markus (MAN Diesel and Turbo) Orth Ulrich (MAN Diesel and Turbo)

19

Aschenbruck Emil (MAN Diesel and Turbo) Reiss Frank (MAN Diesel and Turbo) #094 Development of 5MW Gas Turbine for 60Hz Nam Samsik (Doosan Heavy Industries & Construction, Co., Ltd.), Nam Samsik (Doosan Heavy Industries & Construction, Co., Ltd.) Park Juncheol (Doosan Heavy Industries & Construction.Co., Ltd) Song Juyoung (Doosan Heavy Industries & Construction, Co., Ltd) Lee Kihoon (Doosan Heavy Industries & Construction, Co., Ltd.) Kim Sunghyun (Doosan Heavy Industries & Construction.Co., Ltd.) DO(3) Development and Operation III Nov.17(Thursday) 11:20-12:50 Room1007 #214 Oil Scavenging CFD Simulations and Experiments in the Accessory Gearbox of an Aircraft Engine Arisawa Hidenori (Kawasaki Heavy Industries, LTD.) Arisawa Hidenori (Kawasaki Heavy Industries, LTD.) Nishimura Motohiko (Kawasaki Heavy Industries, LTD.) Tanaka Kenichiro (Kawasaki Heavy Industries, LTD.) Imai Hideyuki (Kawasaki Heavy Industries, LTD.) Goi Tatsuhiko (Kawasaki Heavy Industries, LTD.) #189 Evolution and Future Trend of Large Frame Gas Turbine Hada Satoshi (Mitsubishi Heavy Industries,LTD.) Hada Satoshi (Acting Manager ) Masada Junichiro (Deputy General Manager) Ito Eisaku (Research Engineering Manager) Tsukagoshi Keizo (Chief Engineer) #197 Progress in Technology Development for the Next Generation High Temperature Gas Turbine Ito Eisaku (Mitsubishi Heavy Industries,Ltd.) Ito Eisaku (Mitsubishi Heavy Industries,Ltd.) Tsukagoshi keizo (Mitsubishi Heavy Industries,Ltd.) Masada Junichiro (Mitsubishi Heavy Industries,Ltd.)

20

Okada Ikuo (Mitsubishi Heavy Industries,Ltd.) Sakamoto Yasuro (Mitsubishi Heavy Industries,Ltd.) HT(1) Conjugate Heat Transfer Nov.14(Monday) 11:40-13:10 Room1009 #086 Conjugate Calculation of a Film Cooled Blade for Improvement of the Leading Edge Cooling Configuration Moritz Norbert (B&B-AGEMA) Moritz Norbert (B&B-AGEMA) Kusterer Karsten (B&B-AGEMA) Bohn Dieter (RWTH Aachen University) Sugimoto Takao (KHI) Tanaka Ryozo (KHI) #164 Conjugate Heat Transfer Simulation of an Inlet Guide Vane with Closed-Loop Steam Cooling Zhang Chao (Institute of Engineering Thermophysis, Chinese Academy of Sciences) Zhang Chao (Institute of Engineering Thermophysis, Chinese Academy of Sciences) Hu Jie (Liu) Jianjun #204 Conjugate Heat Transfer Simulation of Cooled Turbine Vanes Using Unstructured-Mesh CFD Solver Sasaki Daisuke (Tohoku University) Sasaki Daisuke (Tohoku University) Yoshiara Tetsuya (Tohoku University) Yasuda Shunpei (Tohoku University) Nakahashi Kazuhiro (Tohoku University) #001 Numerical Validation of Conjugate Heat Transfer on a Transonic Turbine Cascade and its PSE Analysis Mao Ronghai (Alstom (Switzerland)) Yan P (Harbin Institute of Technology) Mao R (Alstom) Zhou C (Harbin Institute of Technology) Feng G (Harbin Institute of Technology)

21

HT(2) Numerical Simulation of Heat Transfer I Nov.14(Monday) 14:30-16:00 Room1009 #096 Thermal Analysis of the First Stage Gas Turbine Blade using the Combustion Simulation Cho Hyung Hee (Yonsei University) Park Jun Su (Yonsei Universtiy) Lee Dong Myung (Yonsei Universtiy) Jung Eui Yeop (Yonsei Universtiy) Kim Beom Soo (Korea Electric Power Research Institute) Cho Hyung Hee (Yonsei Universtiy) #198 Benchmark Simulation of RANS CFD for Heat Transfer Evaluation on the VKI LS89 Blade Takahashi Toshihiko (Central Research Institute of Electric Power Industry) Takahashi Toshihiko (Central Research Institute of Electric Power Industry) Arts Tony (von Karman Institute for Fluid Dynamics) Verstraete Tom (von Karman Institute for Fluid Dynamics) Prinsier Johan (von Karman Institute for Fluid Dynamics) #017 Computations of Flow and Heat Transfer in a Rotor-Stator System with Externally-induced Ingestion Wilson Mike (University of Bath) Wang Le (University of Bath) Wilson Mike University of Bath Tham Kok-Mun (Siemens Energy, Inc.) HT(3) Numerical Simulation of Heat Transfer II Nov.14(Monday) 16:20-17:50 Room1009 #016 Numerical Investigations of the Effect of Vortex Structures on Local Heat Transfer in a Large Scale Turbine Cascade Dishur Rebecca (TU Kaiserslautern) Dishur Rebecca (TU Kaiserslautern) B・hle Martin (TU Kaiserslautern) Wiedermann Alexander (MAN Diesel & Turbo SE) Takeishi Kenichiro (Osaka University)

22

#060 A High-Order LES Approach to study the Redistribution of the Inlet Temperature Distortion in a Turbine Biswas Debasish (Toshiba Corporation) Biswas Debasish (Toshiba Corporation) Jimbo tomohiko (Toshiba Corporation) #141 CFD Predictions of the Aerodynamics and Heat Transfer from Arrays of Impinging Jets with Crossflow Andrews Gordon (University of Leeds) Andrews Gordon E (University of Leeds) Wang J. (University of Leeds) Abdul Hussain R.A.A. (University of Leeds) HT(4) Heat Transfer Measurement Nov.15(Tuesday) 9:30-11:00 Room1009 #019 The Validation between the Measurement and the Calculational Analysis for the Surface Temperature of High-temperature Turbine Blades in a Gas Turbine Xiao Dongming (Harbin Marine Boiler & Turbine Research Institute, P. R. China) Wen Xueyou (Harbin Marine Boiler & Turbine Research Institute, P. R. China) Zhang Lichao (Harbin Marine Boiler & Turbine Research Institute, P. R. China) Gu Zhongming (Harbin Marine Boiler & Turbine Research Institute, P. R. China) Xiao Dongminf (Harbin Marine Boiler & Turbine Research Institute, P. R. China) #062 Annular Sector Cascade Rig Tests of a CMC Stator Vane Nita Kozo (IHI Corporation) Nita Kozo (IHI Corporation) Okita Yoji (IHI Corporation) Nakamata Chiyuki (IHI Corporation) #212 Effect of Fin Overlap and Eccentricity on Rim Seal Performance ] Ishida Katsuhiko (Kawasaki Heavy Industries, Ltd.) Ishida Kastsuhiko (Kawasaki Heavy Industries, Ltd.) HT(5) Heat Transfer on Film Cooling I

23

Nov.15(Tuesday) 11:20-12:50 Room1009 #172 Gas Turbine Blade Tip and Near-Tip Heat Transfer with Film Cooling Acharya Sumanta (Louisiana State University) Kramer Gregory (Louisiana State University, USA ) Moreaux Louis (Louisiana State University, USA) Acharya Sumanta (Louisiana State University, USA) Nakamata Chiyuki (IHI Corpn., Japan) 154 Performance of Tripod Antivortex Injection Holes on Vane Pressure Side Film Cooling LeBlanc Chris (Virginia Tech) LeBlanc Chris (Virginia Tech) Ekkad Srinath (Virginia Tech) Narzary Diganta (Virginia Tech) #195 Film Cooling Performance over Dimpled Cutback Surface at Airfoil Trailing Edge Murata Akira (Tokyo University of Agriculture and Technology) Nishida Satomi (Tokyo University of Agriculture and Technology) Murata Akira (Tokyo University of Agriculture and Technology) Ito Kousuke (Tokyo University of Agriculture and Technology) Saito Hiroshi (Tokyo University of Agriculture and Technology) Iwamoto Kaoru (Tokyo University of Agriculture and Technology) HT(6) Heat Transfer on Film Cooling II Nov.16(Wednesday) 9:30-11:00 Room1009 #148 Multi-Row Transpiration Cooling with Comparison to Discrete Arrays Natsui Greg (University of Central Florida) Natsui Greg (University of Central Florida ) Miller Mark (University of Central Florida) Torrance Michael (University of Central Florida) Ricklick Mark (University of Central Florida ) Kapat Jayanta (University of Central Florida)

24

#149 Overall Thermal Performance of Transport Promoters in Internal Cooling Channels for Rotating Machineries Valentino Michelle (Center for Advanced Turbines and Energy Research, Laboratory for Turbine Aerodynamics, Heat Transfer, and Durability, Univer s ity of Central Florida) Valentino Michelle (CATER/FCAAP, UCF) Tran Lucky (CATER/FCAAP, UCF) Slabaugh Carson (CATER/FCAAP, UCF) Ricklick Mark (CATER/FCAAP, UCF) Kapat Jay (CATER/FCAAP, UCF) #057 Heat Transfer and Aerodynamics Studies of Multiple Cooling Holes Abdullah Kamil (Iwate University) AbdullahKKamil Iwate ( University) Funazak Ken-ichi (Iwate University) Ideta Takeomi (IHI Corporation) Kikkawa Yohei (Iwate University) HT(7) Heat Transfer on Film Cooling III Nov.16(Wednesday) 11:20-12:50 Room1009 #085 Numerical Investigation of the NEKOMIMI Hole Configuration under Hot Gas Conditions Kusterer Karsten (B&B-AGEMA) Kusterer Karsten (B&B-AGEMA) Bohn Dieter (RWTH Aachen University) Sugimoto Takao (KHI) Kazari Masahide (KHI) Tanaka Ryozo (KHI) #049 Experimental Investigation of Film Cooling in a Rotor Blade of a 1.5-stage Turbine Li Guoqing (Institute of Engineering Thermophysics, Chinese Academy of Sciences) Li Guoqing (Institute of Engineering Thermophysics, Chinese Academy of Sciences) #058 Free-Stream Turbulence Effects on Leading Edge Film Cooling Kawabata Hirokazu (Iwate University)

25

Funazaki Ken-ichi (Iwate University) Kawabata Hirokazu (Iwate University) Okita Yoji (IHI Corporation) HT(8) Heat Transfer on Film Cooling IV Nov.17(Thursday) 9:15-11:00 Room1009 Keynote Lecture-7 Aerodynamic Losses in Turbines With and Without Film Cooling (Keynote Lecture) Ligrani Phil (Saint Louis University) Ligrani Phil (Saint Louis University) #227 Effect of Endwall Film Cooling on Horseshoe Vortex Formation at the Junction of Airfoil Leading Edge Kozono Shintaro (Osaka University) Kozono Shintaro (Osaka University) Takeishi Kenichiro (Osaka University) Oda Yutaka Osaka University Seguchi Junichi (Osaka University) #234 Numerical Study for Dependency of Cross-flow Inlet Turbulence on Film Cooling Effectiveness Fujimoto Shu (IHI corporation) Fujimoto Shu (IHI corporation) HT(9) Heat Transfer on Film Cooling V Nov.17(Thursday) 11:20-12:50 Room1009 #122 Numerical Study of Film Cooling on a Vane Endwall by Large Eddy Simulation with a Cooling Hole Model Oda Yutaka (Osaka University) Oda Yutaka (Osaka University) Takeishi Kenichiro (Osaka University) Masataka Uchibori (Osaka University) #126 The Influence of Periodic Unsteady Wakes on Endwall Film Cooling with Combustor-Turbine Interface Gap Leakage Flow Zhang Yang (Tsinghua University)

26

Zhang Yang (Tsinghua University) #138 Effect of Incidence Angle on Film Cooling ? Separating Bubbles Interaction in High Pressure Turbine Yuan Xin (Tsinghua University) Hong Yinyi (Tsinghua University) Lin Zhirong (Tsinghua University) Yuan Xin (Tsinghua University) HT(10) Heat Transfer with Impinging Jet I Nov.14(Monday) 11:40-13:10 Room1009 #228 Effect of Injection Parameters on Jet Array Impingement Heat Transfer Yamane Yoshisaburo (Graduate School of Engineering, Tokyo University of Science) Yamane Yoshisaburo (Graduate School of Engineering, Tokyo University of Science) Ichikawa Yoshiyasu (Graduate School of Engineering, Tokyo University of Science) Yamamoto Makoto (Mechanical Engineering Department, Tokyo University of Science) Honami Shinji (Mechanical Engineering Department, Tokyo University of Science) #257 Heat Transfer Characteristics of Some Multiple Impinging Jets with Swirling Flow Effect Nuntadusit Chayut (Prince of Songkla University) Nuntadusit Chayut (Prince of Songkla University) Wae-hayee M. (Prince of Songkla University) #258 Heat Transfer Enhancement of an Impinging Jet in Crossflow by Elongated Round Orifice Nuntadusit Chayut (Prince of Songkla University) Wae-hayee M. (Prince of Songkla University) Nuntadusit Chayut (Prince of Songkla University) Tekasakul P. (Prince of Songkla University) HT(11) Heat Transfer with Impinging Jet II Nov.14(Monday) 14:30-16:00 Room1008 #151 Heat Transfer to Impinging Jets in a Narrow Channel

27

Miller Mark (University of Central Florida) Miller Mark (University of Central Florida) Claretti Roberto (University of Central Florida) Ricklick Mark (University of Central Florida) Kapat J. S. (University of Central Florida) #097 Heat Transfer Characteristics of Impingement/Effusion Cooling on a Concave Duct Cho Hyung Hee (Yonsei University) Jung Eui Yeop (Yonsei University) Park Chan Ung (Yonsei University) Lee Dong Hyun (Yonsei University) Cho Hyung Hee (Yonsei University) #003 Effect of Roughened Element on Target Surface and Cooling Hole Shape on Impingement Cooling Effectiveness Nakamata Chiyuki (HI Corporation) Nakamata Chiyuki (IHI) HT(12) Internal Cooling I Nov.14(Monday) 16:20-17:50 Room1008 #216 Investigation on Heat Transfer Characteristics of a Cooling Channel with Densely Arranged Rib Turbulator Ishida Katsuhiko (Kawasaki Heavy Industries, Ltd.) Ishida Katsuhiko (Kawasaki Heavy Industries, Ltd.) Hagari Tomoko (Kawasaki Heavy Industries, Ltd.) Takeishi Kenichiro (Osaka University) Oda Yutaka (Osaka University) “#226 Heat Transfer Characteristics of Rib-Roughened Channel with Angled Ribs at Low Pitch-to-Height Ratio Kitada Hiroki (Osaka University) Kitada Hiroki (Osaka University) Takeishi Kenichiro (Osaka University) Komiyama Masaharu (Osaka University) Maeda Hidetake (Osaka University) Ishida Katsuhiko (Kawasaki Heavy Industries, Ltd.)

28

#077 Numerical Optimization of Ribbed Serpentine Cooling Ducts Zhang Xiaodong (Institute of Engineering Thermophysics, Chinese Academy of Sciences) Zhang Xiaodong (Institute of Engineering Thermophysics, Chinese Academy of Sciences) Liu Jianjun (Institute of Engineering Thermophysics, Chinese Academy of Sciences) An Baitao (Institute of Engineering Thermophysics, Chinese Academy of Sciences) HT(13) Internal Cooling II Nov.15(Tuesday) 9:30-11:00 Room1008 #203 Study on the Effects of Pin Inclination in Convection Cooling for Turbine Blade Yamane Takashi (Japan Aerospace Exploratin Agency) Takeda Toshihiro (Tokyo University of Agriculture and Technology) Yamane Takashi (Japan Aerospace Exploratin Agency) Bamba Takahiro (IHI Corporation) #123 Shape Optimization of a Rotating U-Duct Channel with Guide Vanes in the Turning Region Kim Kwang-Yong (Inha University) Moon Mi-Ae Inha (Univ.) Kim Kwang-Yong (Inha Univ.) #103 Heat Transfer and Fluid Flow in a Rectangular Channel with the Combination of Dimples, Protrusions and Angled Ribs Xie Yonghui (Xi'an jiaotong University/ China) SV(1) Structure, Vibration and Noise I Nov.14(Monday) 11:40-13:25 Room1006 Keynote Lecture-2 New Directions in Turbomachinery Aero-Acoustics (Keynote Lecture) Spakovszky Zoltan S. (MIT, GTL) #047 Environmental Noise Impact Assessment Method of Cogeneration System Kaneuchi Ken (Osaka Gas CO., LTD) Kaneuchi Ken (Osaka Gas CO., LTD)

29

Nishimura Koichi (Osaka Gas CO., LTD) #079 Experimental and Numerical Investigation of Supersonic Jet Noise Reduction with Microjet Injection Okada Ryuichi (School of Engineering, University of Tokyo) Okada Ryuichi (School of Engineering, University of Tokyo) Watanabe Toshinori (Department of Aeronautics and Astronautics, University of Tokyo) Uzawa Seiji (Department of Aeronautics and Astronautics, University of Tokyo) Himeno Takehiro (Department of Aeronautics and Astronautics, University of Tokyo) Oishi Tsutomu (IHI Corporation) SV(2) Structure, Vibration and Noise II Nov.14(Monday) 14:30-16:00 Room1006 #207 Research on Mixing Devices for Jet Noise Reduction Ishii Tatsuya (JAXA) Ishii Tatsuya (JAXA) Oinuma Hideshi (JAXA) Nagai Kenichiro (JAXA) Tagashira Takeshi (JAXA) #065 Study on Vibration Response Reduction of Mistuned Bladed Disk by Use of Asymmetric Vane Spacing Kaneko Yasutomo (Ryukoku University) Kaneko Yasutomo (Ryukoku University) Ohta Masaki (Ryukoku University) Mori Kazushi (Mitsubishi Heavy Industries) Ohyama Hiroharu (Mitsubishi Heavy Industries) SV(3) Structure, Vibration and Noise III Nov.14(Monday) 16:20-17:50 Room1006 #186 Reduced Order Modeling of a Bladed Rotor with Geometric Mistuning: Alternative Bases and Extremely Large Mistuning Sinha Alok (The Pennsylvania State University) Bhartiya Yasharth (Penn. State Univ.)

30

Sinha Alok (Penn. State Univ.) #034 Development and Validation of Flutter Analysis Tool Using a Harmonic Balance Method Aotsuka Mizuho (IHI Corporation) Aotsuka Mizuho (IHI Corporation) Kielb Robert (Duke University) Hall Kenneth (Duke University) #218 3-D Linear Unsteady Aerodynamic-Force Calculations of Vibrating Blade Rows Using the UPACS-based CFD Codes Yamasaki Nobuhiko (Kyushu University) Kubo Ayumi (Kyushu University) Yamasaki Nobuhiko (Kyushu University) SV(4) Structure, Vibration and Noise IV Nov.15(Tuesday) 9:30-11:00 Room1007 #093 Investigation on Impeller Blade Tip Rubbing During Compressor Performacne Test Park Luke (DOOSAN Heavy Industry and Construction) Park Luke (DOOSAN Heavy Industry and Construction) 246 A Study on Stacking Method in Advanced Fan Blade Ota Toyohiko (ASIRI) Fujimoto Takayuki (ASIRI) Kusunoki Itaru (ASIRI) Ota Toyohiko (ASIRI) Masaki Daisaku (JAXA) #167 Development of an Assistant Design System for Gas Foil Bearings Feng Kai (Tokyo Institute of Technology) Feng Kai (Tokyo Institute of Technology) Kaneko Shigehiko (The University of Tokyo) DOTT(1) Turbocharger Technology I Nov.16(Wednesday) 9:30-11:00 Room1005

31

Keynote Lecture-3 Boosting and Turbocharger Needs for Highly Downsized Low Carbon Vehicles (Keynote Lecture) Martinez-Botas Ricardo F. (Imperial College London) #026 Technology of the Turbocharger Applied to IMO2 4-stroke Marine Diesel Engine Nakano Kenji (IHI Corporation) Nakano Kenji (IHI Corporation) Nakano Ken (IHI Corporation) Murano Ryuuma (IHI Corporation) Hirata Yutaka (IHI Corporation) DOTT(2) Turbocharger Technology II Nov.16(Wednesday) 11:20-12:50 Room1005 #052 Design and Development of a Low Pressure Turbine for Turbocompounding Applications Ricardo Martinez-Botas (Imperial College London) Aman Bin Mamat (Imperial College London) Alessandro Romagnoli (Imperial College London ) Ricardo Martinez-Botas (Imperial College London) #080 Feature of Internal Flow Phenomena of Centrifugal Compressor for Turbocharger with Wide Operating Range Tomita Isao (Nagasaki Research & Development Center Mitsubishi Heavy Industries, Ltd.) Tomita Isao (Nagasaki Research & Development Center Mitsubishi Heavy Industries, Ltd.) Ibaraki Seiichi (Nagasaki Research & Development Center Mitsubishi Heavy Industries, Ltd.) Furukawa Masato (Department of Mechanical Engineering Kyushu University) Yamada Kazutoyo (Department of Mechanical Engineering Kyushu University) #233 Study on the Tip Clearance Effects in the Centrifugal Compressor of a Micro Gas Turbine by Means of Numerical Simulations Olivero Mattia (Delft University of Technology) Olivero Mattia (Delft University of Technology) Javed Adeel (Delft University of Technology) Pecnik Rene (Delft University of Technology) Colonna Piero (Delft University of Technology) Van Buijtenen (Jos Delft University of Technology)

32

DOTT(3) Turbocharger Technology III Nov.17(Thursday) 9:30-11:00 Room1005 #121 Effect of Pipe System and Casing Configuration on Surge Phenomenon of Centrifugal Compressor Ayukawa Shouta (Osaka Institute of Technology) Ayukawa Shouta (Osaka Institute of Technology) Kawata Yutaka (Osaka Institute of Technology) Inoue Ken (Osaka Institute of Technology) Fukuyama Kazunari (Osaka Institute of Technology) Tsujimoto Yoshinobu (Osaka University) #109 Application of FMM for Mistuning Analysis of Radial Inflow Turbine Hattori Hiroaki (IHI Corporation) Hattori Hiroaki (IHI Corporation) DOTT(4) Performance of Turbocharger Nov.17(Thursday) 11:20-12:50 Room1005 #088 Improvement of Turbocharger Compressor Map width and Performance due to Vanes in the Annular Cavity of a Classical Bleed Slot System Sivagnanasundaram Subenuka (Queen's University Belfast UK) Sivagnanasundaram Subenuka (Queen's University Belfast, UK) Spence Stephen (Queen's University Belfast, UK) Early Juliana (Queen's University Belfast, UK) Nikpour Bahram (Cummins Turbo Technologies, UK) #112 Influence of Variable Nozzle Geometry on Radial Turbine Performance Natkaniec Christoph K. (Institute of Turbomachinery and Fluid Dynamics, Leibniz Universitaet Hannover) Natkaniec Christoph K (Institute of Turbomachinery and Fluid Dynamics, Leibniz Universitaet Hannover) Kammeyer Jasper (Instituteof Turbomachinery and Fluid Dynamics, Leibniz Universitaet Hannover) Seume Joerg R (nstitute of Turbomachinery and Fluid Dynamics, Leibniz Universitaet Hannover) #158 Single Entry Mixed Flow Turbine Performance Prediction With 1-D Gas Dynamic Code Coupled With Mean Line Model

33

Rajoo Srithar (Universiti Teknologi Malaysia) Chiong Meng Soon (Universiti Teknologi Malaysia) Rajoo Srithar (Universiti Teknologi Malaysia) Romagnoli Alessandro (Imperial College London) ST＊(1) Steam Turbine I Nov.15(Tuesday) 9:30-11:00 Room1006 #053 Prediction of Effects of Potential Field Interaction and Wake Interaction on Unsteady Force for Buckets Nakajima Tomomi (Hitachi Ltd.) Nakajima Tomomi (Hitachi Ltd. ) Shikano Yoshio (Hitachi Ltd). Yamashita Yutaka (Hitachi Ltd.) #104 Non-equilibrium Condensing Flow Modeling in Nozzle and Turbine Cascade Yuan Xin (Tsinghua University) Zhu Xiaofeng (Tsinghua University) Lin Zhirong (Tsinghua University) Yuan Xin (Tsinghua University) #002 Controlling Mixing at the Interaction Zone through Systematic Variation of the Inlet Rotor Cavity Volume and Length Scale Barmpalias Konstantinos (ETH Zurich) Barmpalias Konstantinos G. (ETH Zurich) Kalfas Anestis I. (AUTH) Abhari Reza S. (ETH Zurich) Hirano Toshio (Toshiba Corporation) Shibukawa Naoki (Toshiba Corporation) ST＊(2) Steam Turbine II Nov.15(Tuesday) 11:20-12:50 Room1006 Keynote Lecture-4 Recent Technologies for Concentrated Solar Power Systems and Steam Turbines (Keynote Lecture) Okita Nobuo (Toshiba Corporation)

34

#146 Blade Manufacturing Process Appraisal Using a Coordinate Measurement Machine Zachos Pavlos (Cranfield University) Zachos Pavlos (Cranfield University) Kalfas Anestis (Pilidis) Pericles ST＊(3) Long Blade Technology of Steam Turbine Nov.16(Wednesday) 9:30-11:00 Room1006 #168 Development and Verification of The Next Generation's Steam Turbine Watanabe Toshio (Mitsubishi Heavy Industries,Ltd. ) Watanabe Toshio (Mitsubishi Heavy Industries,Ltd.) Ohyama Hiroharu (Mitsubishi Heavy Industries,Ltd.) Miyawaki Toshihiro (Mitsubishi Heavy Industries,Ltd) Mori Kazushi (Mitsubishi Heavy Industries,Ltd.) #211 Development of Titanium 48-inch Last Stage Series for 3600rpm Steam Turbine Shibukawa Naoki (Toshiba Corporation) Murata Yoriharu (Toshiba Corporation) Okuno Kenichi (Toshiba Corporation ) Shibukawa Naoki (Toshiba Corporation) Murakami Itaru (Toshiba Corporation) Hashidate Tadayuki (Toshiba Corporation ) #249 Development of Titanium 3600rpm-50inch and 3000rpm-60inch Last Stage Blades for Steam Turbines Senoo Shigeki (Hitachi, Ltd.) Senoo Shigeki (Hitachi, Ltd.) Hideki Ono (Hitachi, Ltd.) Takanori Shibata (Hitachi, Ltd.) Susumu Nakano (Hitachi, Ltd.) Kazuya Sakakibara (Hitachi, Ltd.) ST＊(4) Efficiency Enhancement of Steam Turbine

35

Nov.16(Wednesday) 11:20-13:05 Room1006 "Keynote Lecture-5, #120" Fluid Dynamic Efficiency Optimization of Steam Turbine Stages Considering Leakage Influences and Inter-stage Reciprocal Interferences Tanuma Tadashi (Teikyo University) Yuan Xin (Tsinghua University) Pu Qian (Tsinghua University) Zhu Xiaofeng (Tsinghua University) Niizeki Yoshiki (Toshiba Corporation) Tanuma Tadashi (Teikyo University) #155 Multilevel Design Optimization for Long Blade of Steam Turbines Using Self-adaptive Differential Evolutionary Algorithms Li Jun (Xi'an Jiaotong University) Song Liming (Xi'an Jiaotong University) Ohyama Hiroharu (Mitsubishi Heavy Industries, LTD.) Li Jun (Xi'an Jiaotong University) Feng Zhenping (Xi'an Jiaotong University) #173 Development of New High-Performance Labyrinth Seal Kuwamura Yoshihiro (Mitsubishi Heavy Industries, Ltd.) Ooyama Hiroharu (Mitsubishi Heavy Industries, Ltd.) Tanaka Yoshinori (Mitsubishi Heavy Industries, Ltd.) Nishimoto Shin (Mitsubishi Heavy Industries, Ltd.) Matsumoto Kazuyuki (Mitsubishi Heavy Industries, Ltd.) Uehara Hidekazu (Mitsubishi Heavy Industries, Ltd.) ST＊(5) Ultra-Supercritical Steam Turbine I Nov.17(Thursday) 9:30-11:00 Room1006 #169 "Development of Advanced USC Technologies for 700℃ class High Temperature Steam Turbines" Tanaka Yoshinori (Mitsubishi Heavy Industries, LTD.) Tanaka Yoshinori (Mitsubishi Heavy Industries, LTD.)

36

Nishimoto Shin (Mitsubishi Heavy Industries, LTD.) Setoyama Masayuki (Mitsubishi Heavy Industries, LTD.) Yamamoto Ryuichi (Mitsubishi Heavy Industries, LTD.) Hirakawa Yuichi (Mitsubishi Heavy Industries, LTD.) #188 Sand Castings made of Alloy 625 and Dissimilar Welding for Steam Turbine Applications Lochbichler Claus (Voestalpine Giesserei Traisen GmbH) Lochbichler Claus (Voestalpine Giesserei Traisen GmbH) Kolenz Franz (Voestalpine Giesserei Traisen GmbH) #018 Simulation of Supercritical-fluid Flows in Turbomachinery Yamamoto Satoru (Tohoku University) Wang Ning (Tohoku University) Furusawa Takashi (Tohoku University) Furusawa Takashi (Tohoku University) Sasao Yasuhiro (Tohoku University) Yamamoto Satoru ST＊(6) Ultra-Supercritical Steam Turbine II Nov.17(Thursday) 11:20-12:50 Room1006 #210 Turbine Design and Materials Aspects for A-USC Power Plants Takahashi Takeo (Toshiba corporation) Takahashi Takeo (Toshiba corporation) Murakami Yuya (Toshiba corporation) Iwai Shogo (Toshiba corporation) Miyashita Shigekazu (Toshiba corporation) Nemoto Kuniyoshi (Toshiba corporation) #176 Material Design and Trial Manufacturing of Ni-base Supwealloy for A-USC Steam Turbine Large Components Saito Eiji (Hitachi, Ltd.) Imano Shinya (Hitachi, Ltd.) Sato Jun (Hitachi, Ltd.) Kamoshida Hironori (Hitachi, Ltd.)

37

Saito Eiji (Hitachi, Ltd.) MT＊(1) Advance Gas Turbine Material Nov.14(Monday) 11:40-13:10 Room1005 #008 Development of NIMS Burner Rig and Cyclic Oxidation of Ni-base Single Crystal Superalloys Matsumoto Kazuhide (National Institute for Materials Science) Matsumoto Kazuhide (NIMS) Koizumi Yutaka (NIMS) Kawagishi Kyoko (NIMS) Harada Hiroshi (NIMS) #181 Development of Ni -base Single-Crystal Superalloy for the Next Generation Gas Turbine blade Taneike Masaki (Mitsubishi Heavy Industries Ltd.) Okada Ikuo (Mitsubishi Heavy Industries Ltd. ) Taneike Masaki (Mitsubishi Heavy Industries Ltd.) Oguma Hidetaka (Mitsubishi Heavy Industries Ltd.) Yokokawa Tadaharu (ational Institute for Materials Science ) Harada Hiroshi ational Institute for Materials Science MT＊(2) Crack Propagation in Gas Turbine Component Nov.14(Monday) 14:30-16:00 Room1005 #031 Evaluation of Crack Propagation Behavior in Gas Turbine First-Stage Nozzle Kagawa Hiroyuki (The Kansai Electric power Co. Inc.) Kagawa Hiroyuki (The Kansai Electric power Co. Inc.) #061 Fatigue Crack Propagation Behavior Significantly Interacting with Microstructural Units in Thin Wall Ni-base Superalloy Structures Okazaki Masakazu (Nagaoka University of Technology) Okazaki Masakazu (Nagaoka University of Technology) Sakaguchi Motoki (Nagaoka University of Technology) Yamanobe Sou (Nagaoka University of Technology)

38

Namba Ko-ichi (Mitsui Engineering & Shipbuilding CO., LTD) #199 Characteristics of Crack Initiation of Inconel? Alloy 706 for Gas Turbine Rotor Kobayashi Daisuke (Electric Power Research and Development Center, Chubu Electric Power Co., Inc.) Kobayashi Daisuke (Chubu Electric Power Company) Ito Akihiro (Chubu Electric Power Company) Miyabe Masamichi (Chubu Electric Power Company) Kagiya Yukio (Chubu Electric Power Company) Ishibashi Kazutoshi (Toshiba Corporation) MT＊(3) Gas Turbine Failure and Life Assessment I Nov.14(Monday) 16:20-17:50 Room1005 #069 Examination of Estimation Method of Damage in Gas Turbine Blade Root Fixings Kurashima Hirotaka (Kawasaki Heavy Industries, LTD.) Kurashima Hirotaka (KHI) Imai Tatsuya (KHI) Matsuda Hirokazu (KHI) Hiramatsu Hideki (KHI) Tanimura Kazuhiko (KHI) “042 First Stage Segmented Nozzle Failure Analysis Asadikouhanjani Saeed (MAPNA Turbine Blade Engineering & Manufacturing Co. – PARTO) Asadikouhanjani Saeed (MAPNA Turbine Blade Engineering & Manufacturing Co. – PARTO) Ghorbani Reza (MAPNA Turbine Blade Engineering & Manufacturing Co. - PARTO ) #075 Evaluation on Relaxation Behaviors of Compressive Residual Stress of Peened Inconel? Alloy 706 Test Specimens after Thermal and Stress Aging Treatments Sumiya rie (Toshiba Corporation Power Systems Company ) Sumiya Rie (Toshiba Corporation Power Systems Company) Tazawa Toshiyuki (Toshiba Corporation Power Systems Company) Yoshioka Yomei (Toshiba Corporation Power Systems Company ) Ishibashi Kazutoshi (Toshiba Corporation Power Systems Company ) Kobayashi Daisuke (Chubu Electric Power Company)

39

MT＊(4) Gas Turbine Failure and Life Assessment II Nov.15(Tuesday) 9:30-11:00 Room1005 74 Development and Application of Repair Technology for Land-Base Gas Turbine Nozzles Saito Daizo (Toshiba Corporation ) Yoshioka Yomei (Toshiba Corporation) Takaku Reki (Toshiba Corporation) Kitayama Kazuhiro (Toshiba Corporation) Sakai Yoshiaki (Toshiba Corporation) #185 Effects of Stress and Oxidation for Creep and Creep-fatigue Behaviors of Ni-base Superalloy Inconel Alloy 706 Yoshioka Yomei (Toshiba corporation) Yoshioka Yomei (Toshiba corporation) Ishibashi Kazutoshi (Toshiba corporation) Kobayashi Daisuke (Chubu Electric Power Company) Ito Akihiro (Chubu Electric Power Company) Kagiya Yukio (Chubu Electric Power Company) #190 Gas Turbine Condition Diagnostic Techniques for a Proactive Maintenance Mikami Naotaka (Mitsubishi Heavy Industries, Ltd.) Mikami Naotaka (Mitsubishi Heavy Industries, Ltd.) Moriwaki Isao (Mitsubishi Heavy Industries, Ltd.) Ozeki Kazutoshi (Mitsubishi Heavy Industries, Ltd) MT＊(5) Coating Technology Nov.15(Tuesday) 11:20-12:50 Room1005 #118 Damage Behavior and Residual Interfacial Strength of Thermal Barrier Coatings after Thermal Cycle Fatigue Yamazaki Yasuhiro (Niigata Institute of Technology) Yamazaki Yasuhiro (Niigata Institute of Technology) Kuga Shin-ichiro (Niigata Institute of Technology) Fukanuma Hirotaka (Plasma Gikenn Co., Ltd.) Naoyuki Ohno (Plasma Gikenn Co., Ltd.)

40

#180 Development of Thermal Barrier Coating for for the Next Generation 1700℃ Class Gas Turbine Torigoe Taiji (Mitsubishi Heavy Industries,LTD) Torigoe Taiji (Takasago Research & Development Center) Kaneko Hideaki (Takasago Research & Development Center) Nagano Ichiro (Takasago Research & Development Center) Eisaku Ito (Takasago Research & Development Center) Tsukagoshi Keizo (Takasago Machinery Works) #253 New Materials and Processing Concepts for High Performance Therm al Barrier Coatings Stover Detlev (Institute of Energy and Climate Research/ Germany) Stover Detlev PF＊(1) Performance I Nov.14(Monday) 14:30-16:00 Room1004 #010 A Robust and Multi-Objective Trade-off Design Method for Secondary Air System Ihara Shinichiro (IHI Corporation) Ihara Shinichiro (IHI Corporation) Kure Hirotaka (IHI Corporation) Mori Hatsuo (IHI Corporation) #087 Study on Turboprop Engine Performance Behaviors Considering Inlet and Exhaust Duct Pressure Loss in Altitude Test Chamber Condition Kong Changduk (Chosun University) Kong Changduk (Chosun University) Kim Keonwoo (Chosun University) Yoo JaeKyoug (Chosun University) #107 "Fault Diagnostics of A Turbofan Engine Using Inverse Performance Model and Artificial Intelligent Method" Kong Changduk (univ. chosun) Kong Changduk (univ. chosun) Lim Semyeong (univ. chosun) Kim Keongwoo (univ. chosun)

41

PF＊(2) Performance II Nov.14(Monday) 16:20-17:50 Room1004 #144 Performance Evaluation of a Microturbine Centrifugal Compressor Using a Novel Modeling Approach Javed Adeel (Delft University of Technology) Javed Adeel (Delft University of Technology) Olivero Mattia (Delft University of Technology) Pecnik Rene (Delft University of Technology) van Buijtenen Jos. P (Delft University of Technology) #170 A Study on Thrust of Radial Turbine That Have a Permanent Magnet Generator Rotor in a Common Shaft Nakano Susumu (Hitachi, Ltd.) Nakano Susumu (Hitachi, Ltd.) Tsubouchi Kuniyoshi (Formerly with Hitachi, Ltd.) Inoue Tomoaki (Hitachi, Ltd.) Kishibe Tadaharu (Hitachi, Ltd.) Shiraiwa Hiroyuki (Hitachi Engineering & Services Co. Ltd.) PF＊(3) Performance III Nov.15(Tuesday) 9:30-11:00 Room1004 #206 Coolant Modulation and Pre-cooling to Resolve Turbine Blade Overheating Caused by Firing Syngas in Gas Turbines Kim Tong Seop (Inha University ) Kang Do Won (Graduate School, Inha Univ.) Kim Ik Hwan (Graduate School, Inha Univ.) Kim Tong Seop (Dept. Mech. Eng., Inha Univ.) #231 Performance Expectation of a Semi-closed Oxy-fuel Combustion Combined Cycle Using an Existing Gas Turbine Kim Tong Seop (Inha University) Yang Hyun Jun (Graduate School, Inha Univ.) Kang Do Won (Graduate School, Inha Univ.) Kang Soo Young (Graduate School, Inha Univ.)

42

Kim Tong Seop (Dept. of Mech. Eng., Inha Univ.) PF＊(4) System and Control I Nov.15(Tuesday) 11:20-12:50 Room1004 #041 More Electric Engine Architecture for Fuel System of Aircraft Gas Turbine Engine Seki Naoki (IHI Corporation) Seki Naoki (IHI Corporation) Noriko Morioka (IHI Corporation) Hitoshi Oyori (IHI Aerospace Co., Ltd.) Daiki Kakiuchi (IHI Corporation ) Kanji Ozawa (IHI Corporation) #159 Dynamic Simulation of Active Compressor Stability Control for a Gas Turbine Engine Panov Vili (Siemens Industrial Turbomachinery Ltd.) Panov Vili (SIT Ltd ) #200 Load-following Operations of VHTR Gas-turbine Cogeneration System for Developing Countries Sato Hiroyuki (Japan Atomic Energy Agency ) Sato Hiroyuki (Japan Atomic Energy Agency) Yan Xing L. (Japan Atomic Energy Agency) Tachibana Yukio (Japan Atomic Energy Agency) Kato Yukitaka (Tokyo Institute of Technology) PF＊(5) System and Control II Nov.16(Wednesday) 9:30-11:00 Room1004 #208 Development of a Control System for the Catalytic Combustion Gas Turbine (M1A-13X) Kurosaka So (Kawasaki Heavy Industries, Ltd.) Kurosaka So (Kawasaki Heavy Industries, Ltd.) Ashikaga Mitsugu (Kawasaki Heavy Industries, Ltd.) Ogata Masahiro (Kawasaki Heavy Industries, Ltd.) Sato Tsuyoshi (Kawasaki Heavy Industries, Ltd.)

43

Nishi Muneyuki (Kawasaki Heavy Industries, Ltd.) #240 Application of Model-Based Control for JAXA’s Engine Test Tagashira Takeshi (Japan Aerospace Exploration Agency) Tagashira Takeshi (JAXA) Mizuno Takuya (JAXA) Nakata Yasushi (IHI) Satake Tsunehisa (JAXA) Sugiyama Nanahisa (JAXA) #251 Identification of Jet Engine Dynamics Based on the Experimental Data Kimura Mai (IHI Corporation) Kimura Mai (IHI Corporation) Kakiuchi Daiki (IHI Corporation) Furukawa Hiroyuki (IHI Corporation) Tagashira Takeshi (Japan Aerospace Exploration Agency) Sugiyama Nanahisa (Japan Aerospace Exploration Agency) PF＊(6) Stability Enhancement I Nov.16(Wednesday) 11:20-13:05 Room1004 Keynote Lecture-1 Shape Optimization of Casing Treatment for a Transonic Axial Compressor to Improve Operating Stability (Keynote Lecture) Kim Kwan-yong (Inha University) #070 Stall Inception Model for Fan/Compressors including the Effect of Three Dimensional Blade Shape Liu Xiaohua Beihang (University) Liu Xiaohua Beihang (University, China) Hou Ruiwei (Shenyang Aeroengine Research Institute, Shenyang, China) Sun Dakun (Beihang University, China) Sun Xiaofeng (Beihang University, China) #099 Comparison of Stability Range Extension with Micro and Large Air Injection in a Low-Speed Axial Compressor Tong Zhiting (Institute of Engineering Thermophysics, Chinese Academy of Sciences) Tong zhiting (Institute of Engineering Thermophysics, Chinese Academy of Sciences)

44

Li jichao (China Academy of Science for Postgraduates) Nie Chaoqun (Institute of Engineering Thermophysics, Chinese Academy of Sciences) Chen Jinyi (Institute of Engineering Thermophysics, Chinese Academy of Sciences) PF＊(7) Stability Enhancement II Nov.17(Thursday) 9:15-11:00 Room1004 Keynote Lecture-6 A Suggested Mechanism of Significant Stall Suppression by Air Separator Devices in Axial Flow Fans (Keynote Lecture) Yamaguchi Nobuyuki (Meisei University) #082 Effect of Circumferential Single Grooved Casing Treatment on Flow Instability of Transonic Compressor Sakuma Yasunori (University of Tokyo) Sakuma Yasunori (University of Tokyo) Watanabe Toshinori (University of Tokyo) Himeno Takehiro (University of Tokyo) Kato Dai (IHI Corporation) Imaeda Motohiro (IHI Corporation) #014 Steady and Unsteady Flow Effects of Circumferential Grooves Casing Treatment in a Transonic Compressor Rotor Hah Chunill (NASA Glenn) Hah Chunill (NASA) PF*(8) Progress in R&D over Recent 40 years Nov.17(ThuRsday) 11:20-12:50 Room1202 #039 Feasibility study of CCS introduction considering technological and economic dimensions Usui Takafumi (Tohoku University) Usui Takafumi (Tohoku University) Furubayashi Takaaki (Tohoku University) Nakata Toshihiko (Tohoku University) #213 The Evolusion of Airborne Power Systems Jones Ben (Rolls-Royce plc)

45

Jones Ben (Rolls-Royce plc) #222 Tech CLEAN Project: A technological Challenge for Environmental Protection Futamura Hisao (Japan Aerospace Exploration Agency) Futamura Hisao (JAXA) Fukuyama Yoshitaka (JAXA) Nishizawa Toshio (JAXA) Yanagi Ryoji (JAXA) Note: This is tentative program, and is subject to change without prior notice.