connecting technology - hettich · lightweight connecting fittings summary 758 - 759 connecting...
TRANSCRIPT
757Technik für Möbel
Lightweight connecting fittings Summary 758 - 759
Connecting fittings for carcases Summary 768 - 769
Other connecting fittings Summary 798 - 799
Adjustment systems for seating and beds Summary 826 - 827
Plinth adjustment fittings Summary 836 - 737
Shelf supports / rails and brackets Summary 852 - 853
Cabinet suspension brackets and suspension rails Summary 864 - 865
Buffers 884
Connecting technologySummary of ranges
758 www.hettich.com
Large but lighter: Sliding doors of lightweight design permit use of light fittings.
Spot on: With Hettinject, stability can be generated precisely at the most appropriate point.
Creative lighting design: Light sources can be positioned anywhere in lightweight furniture.
Hettinject VB Insert: Flexible positioning of fixing points. Simple drilling.
The lighter way to impress.Hettinject is the intelligent connecting technology for lightweight panels. With these strong fittings you can create first class innovative lightweight furniture and
interior design. And present pioneering ideas to your customers. Take advantage of the new design flexibility – with Hettinject for lightweight materials.
Lightweight connecting fittings
759Technik für Möbel
Hettinject Bonding dowels for lightweight applications with ultrathin face layers, can be used for standard fittings 760
Hettinject Titan 50 Shelf support mount for lightweight furniture applications with Titan shelf support 1 763
VB Insert Concealed connecting fitting for lightweight applications with particularly positive fitting and friction locked connections using the tried and proven eccentric cam latching principle 761
VB 36 HT Connecting fitting for lightweight applications with particularly positive fitting and friction locked connections using the tried and proven eccentric cam latching principle 762
Process information for Hettinject The standard for production in controlled processes 764 - 767
Lightweight connecting fittingsSummary
760 www.hettich.com
HettCAD
Hettinject diameter 4 mm
Flexible positioning Compensates tolerances Unsurpassed reliability Permits use of different glues, e.g. Henkel Loctite® or Delo Duopox®
Suitable for chipboard and direct fixing screws with ø 4 mm For drilling diameter of 10 mm Plastic, white
Length mm Order no. PU
14 9 066 657 1/200 ea.
20 9 066 397 1/200 ea.
25 9 066 404 1/200 ea.
27 9 066 406 1/200 ea.
33 9 066 407 1/200 ea.
41 9 083 492 1/200 ea.
45 9 066 409 1/200 ea.
10
3
1 - 3 10
3
1 - 3
Length Length
Installation with drilledlower face layer
Installation with 1 - 3 mm gapto lower face layer
Bonding dowelHettinject
Hettinject diameter 6.3 mm
Flexible positioning Compensates tolerances Unsurpassed reliability Permits use of different glues, e.g. Henkel Loctite® or Delo Duopox®
Suitable for chipboard and direct fixing screws with ø 6.3 mm For drilling diameter of 10 mm Plastic, white
Length mm Order no. PU
33 9 083 488 1/200 ea.
41 9 083 493 1/200 ea.
45 9 083 490 1/200 ea.
10
5
1 - 3
5
101 - 3
Length Length
Installation with drilledlower face layer
Installation with 1 - 3 mm gapto lower face layer
761Technik für Möbel
HettCAD
Hettinject VB Insert
Invisible connecting fitting for very sturdy, positive fittings and friction locked connections between shelves and side panels based on the proven eccentric cam latching principle
Can be used with face layers from 4 mm For panel thicknesses of 38 or 50 mm Permits use of different glues, e.g. Henkel Loctite® or Delo Duopox®
Housing: white plastic Eccentric cam: zinc die-cast
Page reference: For dowel accessories: DU 232 T, DU 320 T, see page 775 - 776
Article version Drilling diameter mm
Order no. PU
VB Insert 38 32 9 097 989 1/200 ea.
VB Insert 50 44 9 097 991 1/200 ea.
32 / 44
36,5
ø 6 - ø 8
50
5032 / 44
ø 6 - ø 8
38 / 50
19 / 25
ø 32 / 44
≥ 4
38 / 50
Optional drilling for tightening the eccentric cam from above
Eccentric cam connecting fittingHettinject VB Insert 38 / 50
762 www.hettich.com
HettCAD
VB 36 HT with rib
Insert shelf from above. Installation aid forhooking in the shelves
VB 36 HT without rib
Insert shelf from above or from the front
Connecting fitting for sturdy, positive fittings and friction locked connections between shelves and side panels based on the tried and proven eccentric cam latching principle
Can be used with face layers from 3 mm For panel thicknesses from 30 - 38 mm or from 45 - 60 mm The fitting is pressed into a double hole drilled 32 mm apart.
Insertion holes with 25 and 10 mm ø Only for mounting in edged lightweight panels Knock in pin increases expanding action With optional rib as installation aid Housing: black plastic Eccentric cam: zinc die-cast
Page reference: For screw in dowel, see page 775 - 776
VB 36 HT 38 for 38 mm shelves
19
ø 10
ø 2532
ø 12
2630-
38
11,5+0,5
15≥ 3
Optional drilling for tightening theeccentric camfrom above
Drilling pattern for shelvesColour Order no. / article version PU
with rib without rib
black 9 066 389 9 066 388 1/200 ea.
VB 36 HT 50 for 50 mm shelves
25
≥ 3
ø 10
ø 2532
ø 12
32
11,5
15
+0,5
45-
60
Optional drilling for tightening theeccentric camfrom above
Drilling pattern for shelves Colour Order no. / article version PU
with rib without rib
black 9 066 391 9 066 390 1/200 ea.
Cover cap for VB 36 HT
Zinc die-cast nickel plated
Finish Order no. PU
nickel plated 9 081 302 1/200 ea.
Eccentric cam connecting fittingVB 36 HT 38 / 50
763Technik für Möbel
HettCAD
Hettinject Titan 50
For sturdy, positive fitting and friction locked attachment of the Titan 1 shelf support (order no. 0 079 713)
Concealed installation behind the shelf Can be used with face layers from 4 mm For panel thickness 50 mm Only for mounting in edged lightweight panels Permits adjustment of the height, lateral fit
and tilt of the shelf support Permits use of different glues, e.g. Henkel Loctite® or Delo Duopox®
For load capacity, see Titan 1 shelf support Plastic, white
Order no. PU
9 135 216 1/20 ea.
ø 44 1/2
50ø 36 ø 36
20
50
105
ø 25
3030
Titan 1 with side adjustment
Concealed installation behind the shelf Bolt: 10 mm AF Max. load capacity is 50 kg/m² for shelves measuring 1000 x 300 mm,
100 kg/m² for shelves measuring 1000 x 250 mm and 160 kg/m² for shelves measuring 1000 x 200 mm
Height adjustment: ± 4 mm Side adjustment ± 4 mm Minimum shelf thickness: 24 mm Adjustment of shelf tilt Steel, galvanised
Page reference: For fixing screws (order no. 0 065 480), see page 882
Order no. PU
0 079 713 1/20 ea.
≤ 1000
≤ 300
25 %
50 %
25 %
1290
20
12±4
± 4
SW 10
100
54
≥ 24
≥ 115
ø 5,5 x 50
Mount for shelf supports / shelf supportsHettinject Titan 50 / Titan 1 with side adjustment
764 www.hettich.com
1 Drilling in the lightweight panel, drilling chips can be left in the panel.
2 Fitting the Hettinject and simul-taneously gluing the dowel
3 The glue bonds the chips and dowel to the face layers and honeycomb structure over a large area.
The process is identical for the Hettinject VB Insert connecting fitting.
The Hettinject bonding dowel guides the glue to the upper and lower face layers via flow channels. This produces a 3-dimensional structure similar to a supporting system connecting the face layers. The result is a highly stable structure capable of absorbing tensile forces as well as compressive forces.
Even lightweight panels with very thin face layers (< 4 mm) can be processed reliably. Cycle times are short, as little glue is required. The curing time can be selected individu-ally, depending on the glue used. Glues which can be used include e.g. Henkel Loctite® or Delo Duopox®.
Process information for HettinjectBonding dowelHettinject
765Technik für Möbel
The fitting is inserted at any desired attachment point from the front and can be operated from both sides.
Hettinject supplies a growing concept with future potential for processing - a concept permitting maximum flexibility combined with reliable process control in production.
The entire process is implemented in any process chain, from manual processing, upgrading individual machine tools in CNC production to all-automatic production lines and complete concepts for pass-through production.
The totally concealed Hettinject VB insert connects size 38 or 50 mm lightweight panels with 4 mm thick face layers. A standard drilling is all that is needed for its use, thus saving time in relation to surface cutting. The glue for the VB insert is applied at two points from which it simulta-neously flows through special glue channels to both face layers, securing the fitting.
Glues which can be used include e.g. Henkel Loctite® or Delo Duopox®. Ideal distribution of forces ensures that the finished product can withstand high load capacities. One exceedingly useful advantage is that this connecting fitting can be combined with the tried-and-tested Twister dowel.
Process information for HettinjectEccentric cam connecting fittingHettinject VB Insert 38 / 50
766 www.hettich.com
Process information for HettinjectPull-out values in lightweight panels
4 8
6.
4.
1.
3.
2.
5.
250
500
750
1000
1250
N
0 N
250
500
750
2,7 mm 3 mm 4 mm
Pull-out values in lightweight panelswith an 4 mm face layer
1. Direct fi xing screws 260 - 300 N2. Special screws for lightweight panels 270 - 310 N3. Hettich socket no. 4 HT 300 - 400 N4. Hettinject bonding dowel 650 - 850 N
Pull-out values in lightweight panelswith an 8 mm face layer
5. Special screws for lightweight panels 620 - 720 N6. Hettinject bonding dowel 750 - 1250 N
Pull-out values for a directfi xing screw in 19 mmsolid chipboard 600 - 700 N
Use recommended inlightweight boards
Use not recommendedin lightweight boards
Face layer thickness The pull-out value increases slightly as the thickness of the face layer increases
Pull-out value was determined in tests using honeycomb board with face layers of chipboard to DIN EN 312 and bulk density to DIN EN 3323.The pull-out values of fastening material can be strongly affected by the nature and quality of the lightweight panels used as well asthe manufacturing tolerances. Therefore the application of the selected fastening material needs to be verified from cast to case.
767Technik für Möbel
4 4 8 8
Fitting Without frame4 mm
face layer4 mm +
Hettinject4 mm + socket
no. 4 HT8 mm
face layer8 mm +
HettinjectConnecting fittings VB 18 / 20 D / 19 / 21 D ✘
VB 36 / 36 M / 36 HT / 36 HT M ✘ ✘
Hettinject VB insert ✘ ✘
Shelf support Sekura / 30 kg ✘ ✘
Rear panel connectors ✘ ✘
Screw in dowel for VB ✘ ✘ ✘ ✘
Cabinet rail supports ✘ ✘ ✘ ✘
Hinges
Intermat (Wood) screws D3.5 / D4.0 ✘ ✘ ✘
Euro screws D6.3 ✘* ✘ ✘*
Sensys (Wood) screws D3.5 / D4.0 ✘ ✘ ✘
Euro screws D6.3 ✘* ✘ ✘*
SlideOn (Wood) screws D3.5 / D4.0 ✘ ✘ ✘
Euro screws D6.3 ✘* ✘ ✘*
Mounting plate (Wood) screws D3.5 / D4.0 / D4.5 ✘ ✘
Euro screws D6.3 ✘* ✘ ✘*
Drawer runners Quadro 25 ✘ ✘ ✘
Quadro V6 / V6+ / V8 ✘ ✘ ✘
Folding and sliding doors TopLine XL ✘ ✘ ✘
TopLine L ✘ ✘ ✘
TopLine 22 ✘ ✘
TopLine M ✘ ✘ ✘
TopLine 27 ✘ ✘
TopLine 110 – door side ✘ ✘
SlideLine 66 – door side ✘ ✘
HorizonSynchro ✘ ✘
WingLine 770 / 780 / 26 ✘ ✘
* Used for Hettinject dowels with ø 5 mm screw slots
The load capacity is determined by the quality of the lightweight panels used.
Without frame< 4 mm face layer
With frame< 4 mm face layer
Without frame > 8 mm face layer
With frame> 8 mm face layer
Process information for HettinjectPull-out values in lightweight panels
768 www.hettich.com
Small components, big performers: Hettich connecting technology is brimming with expertise. For per-fect results.
Spherical eccentric cam: For a better hold in the drill hole. The screwdriver can be held at an angle for greater convenience.
Providing a firm hold: Strong connections between shelves and side panels. High load capacity.
Hettich keeps a firm hold. What fittings from Hettich join together just doesn't come apart. Hettich also supplies reliable and easy to use solutions for more difficult connec-tions in furniture construction.
Solutions that open up numerous design options using clas-sic or lightweight materials. Convenient on-site assembly. Hettich fittings keep what you promise your customers.
Connecting fittings for carcases
769Technik für Möbel
Rastex 15 and Rastex 25 eccentric cam connecting fittings Can be used in conjunction with fast installation dowels and screw in dowels Summary 770 - 771
Megalock eccentric cam connecting fitting Can be used in conjunction with steel dowel and socket 770 - 771
VB 20 / 21 eccentric cam connecting fittings Can be used in conjunction with steel dowels 770 - 771
Eccentric cam connecting fitting with spherical eccentric cams VB 35 / VB 35 M Can be used in conjunction with steel dowels 770 - 771
Eccentric cam connecting fitting with spherical eccentric cams VB 36 / VB 36 M Can be used with steel dowels 770 - 771
VB 54 Toolex / VB 135 / Alfa Stop / Beta Tool-less shelf mounting to the carcase 770 - 771
TZ4, TZ 4 STD, TZ 28 block connecting fittings For connecting carcases, also suitable for solid wood 770 - 771
Rostrino connecting fitting Concealed carcase connection 770 - 771
Connecting fittings for carcasesSummary
770 www.hettich.com
Rastex 15 can be used in combi-nation with Twister and Rapid S dowels.
Rastex 25 can be used in combina-tion with Twister dowels.
Coloured plastic sleeves in easy-to-grip fluted design indicate dowel lengths. Green (dowel length 20 mm) for Rastex 15, blue (dowel length 24.5 mm) for Rastex 25 and black (dowel length 30 mm) for Rastex 15.
Fast, tool-less installation, simply press by hand into the drilling in the carcase side. Easy to tell apart with coloured expanding elements for 8 mm (blue) and 10 mm (green) drillings.
Fast - faster - Rapid SThe new generation of Hettich fast installation dowels with steel core. Slim, light and incredibly strong. Installation without the need for tools – the dowel simply pushes into place. With Rastex, the Rapid S makes the perfect pair.
Twister – quickly fitted without the risk of injuryBy holding the freely rotating sleeve, the Twister can be driven in all the way safely and reliably throughout the insertion process with the cordless screwdriver – preventing risk of injury from sharp edges or burrs.
Connecting fittings for carcasesRapid S fast installation dowel, Twister screw in dowel
771Technik für Möbel
Rastex 15 eccentric cam connecting fitting can be used in conjunction with fast installation dowels Rapid S dowels and screw in Twister dowels and steel dowels, diameter 15 mm 772 - 778
Rastex 25 eccentric cam connecting fitting can be used in combination with screw in Twister dowels, Diameter 25 mm 779 - 780
Megalock eccentric cam connecting fitting can be used in combination with dowel and socket 781
VB 20 / 21 eccentric cam connecting fittings, VB 35 / 35 M / 36 / 36M, Toolex VB 54 / VB 135 / Alfa Stop / Beta shelf connecting fittings, block connecting fittings, Rostrino connecting fitting Range summary 782
End screws, sleeves, sockets, screws, cover caps 799
Accura assembly machinery 1163 - 1172
Connecting fittings for carcasesSummary
772 www.hettich.com
HettCAD
With torque support – allows furniture side panels to be pulled into place from space up to 4 mm from the panel end
Twice as secure thanks to interior and exterior indentations – the dowel is always pulled in to the centred position, ruling out any displacement of furniture components!
Eccentric cam can be tightened with flat-blade screwdriver, Pozidrive screwdriver PZ 3 or Allen key AF 4
With or without rim, the rim covers any jagged drillings, making an additional cover cap unnecessary
zinc die-cast
Page reference: For drill bits for hand and pillar drills, see page 1219
Rastex 15 with rim
FinishOrder no. / panel thickness mm
PU15 16 19 22 29
nickel plated 0 079 451 0 071 948 0 071 950 0 071 952 0 079 478 1/200 ea.
nickel plated 0 079 452 0 073 459 0 073 460 0 073 461 0 079 479 2000 ea.
Rastex 15 without rim
FinishOrder no. / panel thickness mm
PU12 15 16 18 19 22 29
bright 0 020 053 0 079 461 0 079 466 0 013 961 0 079 471 0 079 476 0 079 488 1/200 ea.
bright 9 116 019 0 079 462 0 079 467 0 013 962 0 079 472 0 079 477 0 079 489 2000 ea.
nickel plated 0 020 049 0 079 457 0 025 062 0 013 957 0 025 064 0 025 066 0 079 484 1/200 ea.
nickel plated 0 020 050 0 079 458 0 073 456 0 013 958 0 073 457 0 073 458 0 079 485 2000 ea.
Eccentric cam connecting fittingRastex 15
773Technik für Möbel
HettCAD
Cover caps for Rastex 15 without rim (except for Rastex 15 / 12)
Plastic
Colour Order no. PU
1 white 0 071 054 1/200 ea.
2 brown 0 071 055 1/200 ea.
3 black 0 079 490 1/200 ea.
4 light brown 0 079 491 1/200 ea.
5 beige 9 134 720 1/200 ea.
6 grey 9 134 731 1/200 ea.
Eccentric cam connecting fittingRastex 15Cover caps
774 www.hettich.com
Rastex 15 for 12 mm bottom panel
15
8
6
612 10
2434
+ 0,5 / - 0,3
+ 0,5 / - 0,3
Rastex 15 for 15 mm bottom panel
8
7,5
7,5
15
15 12,2
2434
+ 0,5 / - 0,3
+ 0,5 / - 0,3
Rastex 15 for 16 mm shelf
15
8
8
812,716
2434
+ 0,5 / - 0,3
+ 0,5 / - 0,3
Rastex 15 for 18 mm bottom panel
15
8
9
918 13,4
2434
+ 0,5 / - 0,3
+ 0,5 / - 0,3
Rastex 15 for 19 mm bottom panel
15
8
9,5
19 13,7 9,5
2434
+ 0,5 / - 0,3
+ 0,5 / - 0,3
Rastex 15 for 22 mm bottom panel
8
11
15
2215,7 11
24
34
+ 0,5 / - 0,3
+ 0,5 / - 0,3
Rastex 15 for 29 mm bottom panel
15
8
14,5
2919,2
14,5
2434
+ 0,5 / - 0,3
+ 0,5 / - 0,3
Eccentric cam connecting fittingRastex 15
775Technik für Möbel
HettCAD
Rapid S fast installation dowel DU 324 / DU 325
11
24 / 34ø 8 ø 8
10,520 / 30
Expanding socket for 8 mm drilling diameter Dowel length 20 mm / 30 mm Steel, galvanised / blue plastic
Article version Dowel length mm Order no. PU
Rapid S DU 324 20 0 044 750 1/200 ea.
Rapid S DU 325 30 0 047 458 1/200 ea.
Rapid S fast installation dowel DU 332 / DU 333
11
ø 8 ø 1024 / 34
10,520 / 30
Expanding socket for 10 mm drilling diameter Dowel length 20 mm / 30 mm Steel, galvanised / green plastic
Article version Dowel length mm Order no. PU
Rapid S DU 332 20 0 044 758 1/200 ea.
Rapid S DU 333 30 0 044 759 1/200 ea.
Twister screw in dowel DU 319 T / DU 320 T
ø 5
24 / 34ø 8
9
20 / 30 8,5
With direct fixing thread for drilling diameter of 5 mm Dowel length 20 mm / 30 mm DU 320 T can also be used for VB Insert for
lightweight panels with 8 mm face layers For lightweight panels with 4 mm face layers
installation only with Hettinject bonding dowels Steel / green or black plastic Can be used in System 32
Article version Dowel length mm Order no. PU
Twister DU 319 T, galvanised 20 0 048 037 1/200 ea.
Twister DU 320 T, galvanised 30 0 048 038 1/200 ea.
Eccentric cam connecting fittingRastex 15Rapid S dowel for Rastex 15, Twister dowel for Rastex 15
776 www.hettich.com
HettCAD
Twister screw in dowel DU 243 T / DU 232 T
11,5
ø 5ø 8
24 / 34
20 / 30 11
With direct fixing thread for drilling diameter of 5 mm Dowel length 20 / 30 mm DU 232 T can also be used for VB Insert for lightweight panels with
8 mm face layers For lightweight panels with 4 mm face layers installation only with
Hettinject bonding dowels Steel / green or black plastic Can be used in System 32
Article version Dowel length mm Order no. PU
Twister DU 243 T, galvanised 20 0 020 056 1/200 ea.
Twister DU 232 T, galvanised 30 0 020 058 1/200 ea.
Twister screw in dowel DU 644 T
34
ø 8 11,5
ø 8 / 10
30 7,8
M 6
M6 x 7.8 mm thread Dowel length 30 mm Steel / black plastic
Advice: Please order M6 sockets separately, see page 820 - 821
Article version Order no. PU
Twister DU 644 T, galvanised 0 020 157 1/200 ea.
Screw in dowel DU 425 / DU 428
8
ø 5 / 6 /8 / 10
24 /34
ø 8
20 / 30 7,8
M 4
M4 x 7.8 mm thread Dowel length 20 / 30 mm Steel Can be used in System 32
Advice: Please order M4 sockets separately, see page 820 - 821
Article version Dowel length mm Order no. PU
DU 428 bright 20 0 079 523 1/200 ea.
DU 425 bright 30 0 079 521 1/200 ea.
Eccentric cam connecting fittingRastex 15Twister dowel for Rastex 15
777Technik für Möbel
HettCAD
Double dowel DU 883 / DU 868
24 / 34
16
ø 8 24 / 34
36 / 4656 / 76
For 16 mm centre panel With Seeger circlip ring Drilling diameter 8 mm Dowel length 36 / 56 mm or 46 / 76 mm Steel
Article version Dowel length mm Order no. PU
DU 883 galvanised 56 0 079 552 1/100 ea.
DU 868 galvanised 76 0 079 602 1/100 ea.
Double dowel DU 880 / DU 853
ø 8
19
24 / 34 24 / 34
59 / 7939 / 49
For 19 mm centre panel With Seeger circlip ring Drilling diameter 8 mm Dowel length 39 / 59 mm or 49 / 79 mm Steel
Article version Dowel length mm Order no. PU
DU 880 galvanised 59 0 079 554 1/100 ea.
DU 853 galvanised 79 0 079 568 1/100 ea.
Eccentric cam connecting fittingRastex 15Dowels for Rastex 15
778 www.hettich.com
HettCAD
Angle dowel DU 860
44
44
ø 7X
α
39
39
Adjustable from 90° - 180° Drilling diameter 7 mm Dowel length 39 - 39 mm Steel, galvanised
Order no. PU
0 079 580 1/100 ea.
Angle dowel DU 634
ø 815
ø7
44
α
x
39
M6 x 7 mm thread Drilling diameter 8 mm Dowel length 39 mm Steel, galvanised
Advice: Please order M6 sockets separately, see page 820 - 821
Order no. PU
9 129 712 1/100 ea.
Drill hole spacing X mm for DU 860 Drill hole spacing X mm for DU 634
15 mm 16 mm 19 mm 22 mm 29 mm
100° 37,7 37,3 36,0 34,8 31,8
105° 38,2 37,9 36,7 35,6 32,9
110° 38,7 38,4 37,3 36,3 33,9
115° 39,2 38,9 37,9 37,0 35,8
120° 39,7 39,4 38,5 37,7 35,6
125° 40,1 39,8 39,1 38,3 36,5
130° 40,5 40,3 39,6 38,9 37,7
135° 40,9 40,7 40,1 39,4 38,0
140° 41,3 41,1 40,5 40,0 38,7
145° 41,6 41,5 41,0 40,5 39,4
150° 42,0 41,9 41,5 41,1 40,1
155° 42,3 42,2 41,9 41,6 40,8
160° 42,7 42,6 42,3 42,1 41,4
Angle Shelf thickness
Shelfthickness
Shelfthickness
Shelfthickness
Shelfthickness
15 mm 16 mm 19 mm 22 mm 29 mm
30° 57,0 57,9 60,5 63,1 69,1
35° 54,7 55,4 57,6 59,7 64,7
40° 52,9 53,5 55,3 57,1 61,3
45° 51,5 52,0 53,5 55,0 58,5
50° 50,3 50,7 52,0 53,2 56,2
55° 49,3 49,6 50,7 51,7 54,2
60° 48,3 48,6 49,5 50,4 52,4
65° 47,5 47,7 48,4 49,1 50,8
70° 46,7 46,9 47,5 48,0 49,3
75° 46,0 46,1 46,5 46,9 47,9
80° 45,3 45,4 45,7 45,9 46,6
85° 44,7 44,7 44,8 45,0 45,3
90° 44,0 44,0 44,0 44,0 44,0
Angle Shelf thickness
Shelfthickness
Shelfthickness
Shelfthickness
Shelfthickness
Eccentric cam connecting fittingRastex 15Dowels for Rastex 15
779Technik für Möbel
HettCAD
Rastex 25
The latching stages on the curved tensioning surface and sawtooth-like exterior indentations prevent the eccentric cam from working loose
The dowel is always tightened centrically The reverse torque is three time higher than that of comparable
eccentric cam fittings With or without rim, the rim covers any jagged drillings, making an
additional cover cap unnecessary zinc die-cast
Page reference: For drill bits for hand and pillar drill, see page 1219
Article version Finish Order no. PU
1 with rim nickel plated 0 079 695 1/200 ea.
2 without rim bright 0 013 116 1/200 ea.
Interior and exterior indentation -double security!
8
A (33,5)7
7
ø 25
12
Hole distance A =Dowel length + 9 mm
Dowel centre fromunderside ofbottom panel
Cover caps for Rastex 25
Plastic
Colour Order no. PU
1 white 0 013 117 1/200 ea.
2 brown 0 013 118 1/200 ea.
3 beige 0 025 056 1/200 ea.
4 black 0 070 711 1/200 ea.
Eccentric cam connecting fittingRastex 25
780 www.hettich.com
HettCAD
Twister screw in dowel DU 262 T
33,5
ø 8 11,5
ø 5
24,5 11
Direct fixing thread for drilling diameter of 5 mm Dowel length 24.5 mm Steel / plastic, blue Can be used in System 32
Article version Order no. PU
Twister DU 262 T, galvanised 0 020 060 1/200 ea.
Screw in dowel DU 643
ø 8ø 8
33,5 11,5
24,5 7,8
M 6
M6 x 7.8 mm thread Dowel length 24.5 mm Steel
Advice: Please order M6 sockets separately, see page 820 - 821
Article version Order no. PU
DU 643 bright 0 013 121 1/200 ea.
Eccentric cam connecting fittingRastex 25Dowels for Rastex 25
781Technik für Möbel
HettCAD
Suitable for permanently stressed connections Suitable for carcase and bed construction, as well as bar and face
frame construction The fitting consists of the following components: - Eccentric cam: zinc die-cast, galvanised - Dowel: steel, galvanised with M6 thread or M8 thread - Socket: brass with M6 thread or M8 thread - Cover cap for eccentric cam: black or white plastic, ø 35 mm for
pressing into the workpiece drilling, ø 32 mm for pressing into the eccentric cam connecting fitting
Page reference: For drill bits for hand and pillar drills, see page 1219
Eccentric cam
ø 35
9,5
35
16,5
Drilling patternfor shelves Order no. PU
9 131 208 1/500 ea.
Steel dowels / brass sockets
35
13
ø 10
51 11
M6 / M8 x 13
16
ø 9
Article version Thread Order no. PU
Dowel M6 9 132 012 1/100 ea.
Dowel M8 9 132 013 1/100 ea.
Socket M6 9 132 014 1/500 ea.
Socket M8 9 132 015 1/500 ea.
Cover capsø 38
1,5
ø 32
ø 38
1,5
ø 35
Diameter mm Colour Order no. PU
32 black 9 132 016 1/1000 ea.
32 white 9 132 017 1/1000 ea.
35 black 9 132 018 1/1000 ea.
35 white 9 132 019 1/1000 ea.
Eccentric cam connecting fittingMegalock
782 www.hettich.com
Eccentric cam connecting fittings VB 20 / 21783 - 785
Eccentric cam connecting fittings VB 35 / 35 M / 36 / 36 M786 - 791
Shelf connecting fittings VB 54 Toolex / VB 135 / Alfa Stop / Beta792 - 793
Block connecting fittings TZ 4, TZ 4 STD, TZ 28794 - 795
Rostrino connecting fitting 796
Connecting fittings for carcasesRange summary
783Technik für Möbel
HettCAD
Insert shelf from above. Installation aid for hookingin the shelves
For strong, positive fitting and friction locked connections between shelves and side panels, high load capacity.
The fitting is pressed into a double hole drilled 32 mm apart. Insertion holes with ø 30 and 10 mm
The shelf can be inserted from above The eccentric cam can also be tightened in the bottom panel from
above. A through-hole is required in the bottom panel for this purpose. For special applications, a plinth adjustment element can be adjusted
through the fitting, see page 848 - 849 Zinc die-cast nickel plated Can be used in System 32
Page reference: For drill bits for hand and pillar drills, see page 1219
VB 20 for 19 - 20 mm shelves
10 10
1032
19 - 20
10,5
14,5
9,5
ø 30
15
+0,5
+0,5
Drilling pattern for shelves
Dowel centre fromunderside of shelf
Finish / colour Order no. PU
nickel plated 0 025 049 1/200 ea.
Eccentric cam connecting fittingVB 20With rib
784 www.hettich.com
HettCAD
Insert shelf from above or fromthe front
For strong, positive fitting and friction locked connections between shelves and side panels, high load capacity.
The fitting is pressed into a double hole drilled 32 mm apart. Insertion holes with ø 30 and 10 mm
The shelf can be inserted from above or from the front The eccentric cam can also be tightened in the bottom panel from
above. A through-hole is required in the bottom panel for this purpose. For special applications, a plinth adjustment element can be adjusted
through the fitting, see page 848 - 849 Zinc die-cast nickel plated Can be used in System 32
Page reference: For drill bits for hand and pillar drills, see page 1219
VB 21 for 19 - 20 mm shelves
10 10
1032
19 - 20
10,5
14,5
9,5
ø 30
15
+0,5
+0,5
Drilling pattern for shelves
Dowel centre fromunderside of shelf
Finish / colour Order no. PU
nickel plated 0 047 454 1/200 ea.
Eccentric cam connecting fittingVB 21without rib
785Technik für Möbel
HettCAD
Screw in dowel DU 327
11,5
ø 5
9 11
Direct fixing thread for drilling diameter of 5 mm Dowel length 9 mm Steel Can be used in System 32
Finish Order no. PU
bright 0 025 052 1/200 ea.
Screw in dowel DU 427
ø 5
8,5
9 7,8
M 4
M4 thread Drilling diameter 5 mm Dowel length 9 mm Steel Can be used in System 32
Advice: Please order M4 sockets separately, see page 820 - 821
Finish Order no. PU
bright 9 134 678 1/200 ea.
Cover caps
For drilling diameter of 10 mm Plastic
Colour Order no. PU
white 0 047 584 1/200 ea.
brown 0 047 585 1/200 ea.
beige 0 047 586 1/200 ea.
grey 0 065 136 1/200 ea.
black 9 134 642 1/200 ea.
Eccentric cam connecting fittingVB 20, 21Screw in dowel, cover caps
786 www.hettich.com
HettCAD
~ 5°
Insert shelf from above.Installation aid for hookingin the shelves
Small connecting fittings for sturdy, positive fitting and friction locked connections between shelves and side panels using the tried and proven eccentric cam latching principle
The fitting is pressed into the cropped 20 mm diameter drilling The fitting has a spherical eccentric cam Zinc die-cast / plastic Can be used in System 32
Page reference: For drill bits for hand and pillar drills, see page 1219
VB 35 M / 16 for 16 mm shelves
9,5
20
16 12,5 8
+0,5
Drilling pattern for shelves
Dowel centre fromunderside of shelf
Finish / colour Order no. PU
nickel plated 0 065 501 1/200 ea.
white 0 065 503 1/200 ea.
brown 0 065 504 1/200 ea.
black 0 079 644 1/200 ea.
VB 35 M / 19 for 19 mm shelves
9,5
20
19 14 9,5
+0,5
Dowel centre fromunderside of shelf
Drilling pattern for shelvesFinish / colour Order no. PU
nickel plated 0 065 505 1/200 ea.
white 0 065 507 1/200 ea.
brown 0 065 508 1/200 ea.
black 0 079 643 1/200 ea.
Eccentric cam connecting fittingVB 35 MWith rib
787Technik für Möbel
HettCAD
~ 5°
Insert shelf fromabove or fromthe front
Small connecting fittings for sturdy, positive fitting and friction locked connections between shelves and side panels using the tried and proven eccentric cam latching principle
The fitting is pressed into the cropped 20 mm diameter drilling The fitting has a spherical eccentric cam Zinc die-cast / plastic Can be used in System 32
Page reference: For drill bits for hand and pillar drills, see page 1219
VB 35 / 16 for 16 mm shelves
9,5
20
16 12,5 8
+0,5
Drilling pattern for shelves
Dowel centre fromunderside of shelf
Finish / colour Order no. PU
nickel plated 0 065 509 1/200 ea.
white 0 065 511 1/200 ea.
brown 0 065 512 1/200 ea.
black 0 079 642 1/200 ea.
VB 35 / 19 for 19 mm shelves
9,5
20
19 14 9,5
+0,5
Dowel centre fromunderside of shelf
Drilling pattern for shelvesFinish / colour Order no. PU
nickel plated 0 065 513 1/200 ea.
white 0 065 515 1/200 ea.
brown 0 065 516 1/200 ea.
black 0 079 641 1/200 ea.
Eccentric cam connecting fittingVB 35without rib
788 www.hettich.com
HettCAD
~ 5°
Insert shelf from above.Installation aid forhooking in the shelves
Small connecting fittings for sturdy, positive fitting and friction locked connections between shelves and side panels using the tried and proven eccentric cam latching principle
The fitting is pressed into a double hole drilled 32 mm apart. Insertion holes in a diameter of 20 and 10 mm
The fitting has a spherical eccentric cam Zinc die-cast / plastic Can be used in System 32
Page reference: For drill bits for hand and pillar drills, see page 1219
VB 36 M / 16 for 16 mm shelves
8
10 20
32
9,5
16 10,5 12,5
+0,5
Drilling pattern for shelves
Dowel centre fromunderside of shelf
Finish / colour Order no. PU
nickel plated 0 065 517 1/200 ea.
white 0 065 519 1/200 ea.
brown 0 065 520 1/200 ea.
black 0 079 647 1/200 ea.
VB 36 M / 19 for 19 mm shelves
10
9,5
20
32
1910,5 14 9,5
+0,5
Drilling pattern for shelves
Dowel centre fromunderside of shelf
Finish / colour Order no. PU
nickel plated 0 065 521 1/200 ea.
white 0 065 523 1/200 ea.
brown 0 065 524 1/200 ea.
black 0 079 648 1/200 ea.
Eccentric cam connecting fittingVB 36 MWith rib
789Technik für Möbel
HettCAD
~ 5°
Insert shelf fromabove or fromthe front
Small connecting fittings for sturdy, positive fitting and friction locked connections between shelves and side panels using the tried and proven eccentric latching principle
The fitting is pressed into a double hole drilled 32 mm apart. Insertion holes in a diameter of 20 and 10 mm
The fitting has a spherical eccentric Zinc die-cast / plastic Can be used in System 32
Page reference: For drill bits for hand and pillar drills, see page 1219
VB 36 / 16 for 16 mm shelves
8
10 20
32
9,5
16 10,5 12,5
+0,5
Drilling pattern for shelves
Dowel centre fromunderside of shelf
Finish / colour Order no. PU
nickel plated 0 065 525 1/200 ea.
white 0 065 527 1/200 ea.
brown 0 065 528 1/200 ea.
black 0 079 645 1/200 ea.
VB 36 / 19 for 19 mm shelves
10
9,5
20
32
1910,5 14 9,5
+0,5
Drilling pattern for shelves
Dowel centre fromunderside of shelf
Finish / colour Order no. PU
nickel plated 0 065 529 1/200 ea.
white 0 065 531 1/200 ea.
brown 0 065 532 1/200 ea.
black 0 079 646 1/200 ea.
Eccentric cam connecting fittingVB 36without rib
790 www.hettich.com
HettCAD
Screw in dowel DU 328
11,5
ø 3
6,7 11
With direct fixing thread for drilling diameter of 3 mm Dowel length 6.7 mm Can also be used for lightweight panels with 8 mm face layers For lightweight panels with 4 mm face layers installation only with
Hettinject bonding dowels Steel, galvanised Can be used in System 32
Order no. PU
0 065 540 1/200 ea.
Screw in dowel DU 321
ø 5
11,5
6,7 11
With direct fixing thread for drilling diameter of 5 mm Dowel length 6.7 mm Can also be used for lightweight panels with 8 mm face layers For lightweight panels with 4 mm face layers installation only with
Hettinject bonding dowels Steel, galvanised Can be used in System 32
Order no. PU
0 074 688 1/200 ea.
Screw in dowel DU 322
ø 5
8
6,7 7,8
With direct fixing thread for drilling diameter of 5 mm Dowel length 6.7 mm Can also be used for lightweight panels with 8 mm face layers For lightweight panels with 4 mm face layers installation only with
Hettinject bonding dowels Steel, galvanised Can be used in System 32
Order no. PU
0 064 872 1/200 ea.
Screw in dowel DU 648
11,5
ø 8 / 10
6,7 7,8
M 6
M6 x 7.8 mm thread Dowel length 6.7 mm Steel
Advice: Please order M6 sockets separately, see page 820 - 821
Finish Order no. PU
bright 0 065 534 1/200 ea.
galvanised 0 079 650 1/200 ea.
Screw in dowelVB 35, 35 M, 36, 36 M, 36 HT, 135Dowels for VB 35, 35 M, 36, 36 M, 36 HT, 135
791Technik für Möbel
HettCAD
Screw in dowel DU 426
8,5
ø 5 / 6 /8 / 10
6,7 7,8
M 4
M4 x 7.8 mm thread Dowel length 6.7 mm Steel, bright Can be used in System 32
Page reference: For accessories, M4 sockets, see pages 820 - 821
Order no. PU
0 065 370 1/200 ea.
Double dowel DU 712 / DU 867
ø 5
16 / 19
6,7 6,716 / 19
For 16 mm and 19 mm centre panel Drilling diameter 5 mm Dowel length 6.7 mm Can be used for lightweight panels Steel, bright Can be used in System 32
Article version Panel thickness mm
Order no. PU
DU 712 16 0 065 535 1/100 ea.
DU 867 19 0 065 536 1/100 ea.
Screw in dowelVB 35, 35 M, 36, 36 M, 36 HT, 135Dowels for VB 35, 35 M, 36, 36 M, 36 HT, 135
792 www.hettich.com
HettCAD
Tool-less shelf mounting to the carcase For 3 mm ø and 5 mm ø hole lines Flexible locking catch in the connector housing for easy shelf removal,
shelves can then be refitted at any time Housing rim always ensures correct housing position
even in drillings that are drilled too deep For shelves in a thickness of 23 mm and over, keyhole suspension E
provides the capability of premounting screws to carcase Wide range of screws for mounting supports in ø 3 mm and ø 5 mm
hole lines Zinc die-cast nickel plated / grey plastic
VB 54 all-inclusive item
8
Y
+0,3
18
T X
E
Support part for screwing on
8
9,5
+0,3
8 ø 5
18
T X
Support part for knocking in
Article version Dimension T mm Dimension X mm Dimension Y mm Order no. PU
VB 54/16 16 13.5 8 0 073 618 1/200 ea.
VB 54/19 19 15 9.5 0 073 619 1/200 ea.
VB 54/19 knock in socket 19 15 9.5 9 134 677 1/200 ea.
VB 54/23 23 17 11.5 0 073 620 1/200 ea.
VB 54/29 29 20 14.5 0 073 851 1/200 ea.
Shelf connecting fittingVB 54 Toolex
793Technik für Möbel
HettCAD
Insert shelf from above.Assembly aid forhooking in the shelves
The VB 135 connecting fitting is pressed into the cropped 20 mm ø drilling
The shelf can only be inserted from above The bottom panel with the VB 135 is merely pressed onto the dowel.
The wedging effect pulls the bottom panel to the side and prevents it from falling out
Can be used for shelf thicknesses of 16 mm and over Plastic Can be used in System 32
Page reference: For drill bits for hand and pillar drills, see pages 1219
VB 135
8
20
16 12,5
9,5+0,5
Drilling pattern for shelves
Dowel centre fromunderside of shelf
Colour Order no. PU
white 0 073 616 1/200 ea.
brown 0 073 617 1/200 ea.
black 0 079 649 1/200 ea.
Alfa Stop / Beta
A B
10
C
ø 5
ø 18
8,5
9
Drilling pattern for shelves Alfa Stop support part with quick locking feature for combining with the Beta Gehäuseteil Beta housing element
Support part can be locked into the side of the carcase with the aid of a screwdriver
Zinc die-cast nickel plated
Article version Dimension A mm Dimension B mm Dimension C mm Order no. PU
1 Alfa Stop 8 9 131 206 1/500 ea.
2 Beta 16 14 8 9 132 007 1/1000 ea.
1 Alfa Stop 10 9 132 004 1/500 ea.
2 Beta 20 16 10 9 132 008 1/1000 ea.
1 Alfa Stop 12.5 9 132 005 1/500 ea.
2 Beta 25 18.5 12.5 9 132 009 1/1000 ea.
1 Alfa Stop 14.5 9 132 006 1/500 ea.
2 Beta 30 20.5 14.5 9 132 010 1/1000 ea.
Shelf connecting fittingVB 135, Alfa Stop / Beta
794 www.hettich.com
HettCAD
TZ 4
With premounted screw All-metal TZ 4: angled screw for particularly easy installation Base section with spikes Housing: zinc die-cast or plastic Base section: steel
Finish / colour Order no. PU
nickel plated 0 020 843 1/100 ea.
white 0 013 104 1/100 ea.
brown 0 013 105 1/100 ea.
15
15
ø 4
1
2
9
10,5
3340
15
22
20,5
15,8
3
40
15
22
20,5
15,8
TZ 4 STD
With premounted screw Catch mechanism in top component makes installation easy Oblong hole compensates for expansion / contraction of up to 4 mm
in solid wood Housing: zinc die-cast nickel plated Base section: steel
Finish / colour Order no. PU
nickel plated 0 020 891 1/100 ea.
15
6
4
9
12,2
30,540
15
22
20,5
15,8
Block connecting fittingTZ 4, TZ 4 STD
795Technik für Möbel
HettCAD
TZ 28
For pressing in Socket length 10 mm Attached by ø 4 mm countersunk screw, with the
capability of holding screwdriver at an angle Plastic, white
Order no. PU
0 072 053 1/100 ea.
9,5
ø 8
10,5
Block connecting fittingTZ 28
796 www.hettich.com
Detachable connecting fitting with catch springs Easy installation and removal of the carcase For concealed installation Can be used for carcase connectors Dowel and socket are braced via an additional drilling in the bottom
panel using an hexagon socket spanner size 4 AF, screw the socket in using an hexagon socket spanner size 10 AF
Connecting fitting with dowel and socket Zinc die-cast
Rostrino dowel
19≥
25 16
45SW 4
9,5
ø 12ø 10
25
45
ø 12
ø 6
Order no. PU
9 131 207 1/250 ea.
Rostrino socket
ø 18ø 15
1,5≥ 13
12,5ø 17,3
ø 14,8
90°
Order no. PU
9 132 011 1/250 ea.
Connecting fittingRostrino
797Technik für Möbel
798 www.hettich.com
The connecting fitting VB 25 T makes for sturdy connections with high load capacity.
Hettich worktop connectors for secure, positive fitting and friction locked connections.
Universal corner connector for small carcase units. Simple, straightforward installation.
Never seen, yet indispensable:Hettich connecting fittings reliably hold all modules together to provide lasting furniture stability. A range that has it all: for furniture carcases and worktops, plinths and
drawer fronts, lightweight elements and much more besides – Hettich has just the right connecting fitting that's also easy to install.
Other connecting fittings
799Technik für Möbel
Connectors with positive and non positive locking VB 25 T, VB 35 T, VB 45 - 90 T, VB 90 - 180 T 800 - 803
Worktop connectors AVB 4, AVB 4 Slim, AVB 5 804 - 806
EverFix, MultiClip, mitre connector VB 90 / VB 16 / VB 160 807 - 810
Rear panel connector RV 1, RV 3, RV 7D, RV 8 811 - 813
Front panel connector VB 15, connecting plate 814
Connecting angels, keyhole fittings and connecting screws Euro brackets, universal corner connectors, universal angles, Direkta 2, connecting screw VS, connecting screw VHS 32 815 - 819
End screws, sleeves, sockets, screws, cover caps 819 - 825
Accura assembly machinery 1163 - 1172
Other connecting fittingsSummary
800 www.hettich.com
HettCAD
VB 25 T
For sturdy, positive fitting and friction locked connections with high load capacity
An integrated 90° angle gear with hexagon socket permits quick and convenient bracing using a cordless screwdriver or hexagon socket spanner size 5 AF
Dowel length 60 - 70 mm Min. housing hole depth 20 mm Housing hole diameter 25 mm Through-hole ø 7 mm Housing: zinc die-cast Bolt and socket: steel, galvanised
Page reference: For drill bits for hand and pillar drills, see page 1219
Order no. PU
9 079 555 1/50 ea.
60 - 70ø 25ø 7
ø 10
≥ 20
≥ 21
ø 25
1. 2.
3. 4.
10
60 - 70 21
≥ 20
ø 25 ø 6ø 7
ø 10
SW 5
Connectors with positive and non positive lockingVB 25 T
801Technik für Möbel
HettCAD
VB 35 T
For sturdy, positive fitting and friction locked connections with high load capacity
An integrated 90° angle gear with hexagon socket permits quick and convenient bracing using a cordless screwdriver or hexagon socket spanner size 5 AF
Dowel length 65 - 75 mm Min. housing hole depth 20 mm Housing hole diameter 35 mm Through-hole ø 7 mm Housing: zinc die-cast Bolt and socket: steel, galvanised
Page reference: For drill bits for hand and pillar drills, see page 1219
Order no. PU
9 079 557 1/50 ea.
65- 75 ø 35ø 7
ø 10
≥ 20
≥ 21
ø 35
1. 2.
3. 4.
10
65- 75 21
≥ 20
ø 35 ø 6ø 7
ø 10
SW 5
Connectors with positive and non positive lockingVB 35 T
802 www.hettich.com
HettCAD
VB 45 - 90 T
For sturdy, positive fitting and friction locked connections with high load capacity
Infinitely adjustable for angled connections of 45° - 90° A 90° angle gear integrated into the plastic housing with
hexagon socket permits quick and convenient bracing using a cordless screwdriver or hexagon socket spanner size 5 AF
Dowel length 60 mm Min. housing hole depth 20 mm Housing hole diameter 25 mm Through-hole ø 7 mm Housing: plastic Bolt and socket: steel, galvanised
Page reference: For drill bits for hand and pillar drills, see page 1219
Order no. PU
9 079 564 1/50 ea.
-45° 45°
90°
60 21
ø 10
ø 25
25
ø 7 ø 6
ø 5
20
= =
SW 5
Connectors with positive and non positive lockingVB 45 - 90 T
803Technik für Möbel
HettCAD
VB 90 - 180 T
For sturdy, positive fitting and friction locked connections with high load capacity
Infinitely adjustable for angled connections of 90° - 180° An integrated 90° angle gear with hexagon socket permits
quick and convenient bracing using a cordless screwdriver or hexagon socket spanner size 5 AF
Dowel length 60 mm Min. housing hole depth 20 mm Housing hole diameter 25 mm Through-hole ø 9 mm Housing: zinc die-cast Bolt: steel, galvanised
Page reference: For drill bits for hand and pillar drills, see page 1219
Order no. PU
9 079 561 1/50 ea.
ø 25 ø 9 ø 8
60 60
1020
SW 5
Connectors with positive and non positive lockingVB 90 - 180 T
804 www.hettich.com
HettCAD
AVB 4
For sturdy, positive fitting and friction locked connections between worktops
Quick and convenient bracing using a cordless screwdriver or hexagon socket spanner size 5 AF
Drilling depth at least 20 mm Housing hole diameter 35 mm Housing: zinc die-cast Bolt / counterplate: steel, galvanised
Page reference: For drill bits for hand and pillar drills, see page 1219
Dimension X mm Length mm Order no. PU
33 - 44 81 9 079 575 1/50 ea.
48 - 60 116 9 079 579 1/50 ea.
73 - 86 165 9 079 583 1/50 ea.
1.
2.
10
X X
≥ 20
ø 35 ø 6
SW 5
≥ 7
Worktop connectorsAVB 4
805Technik für Möbel
HettCAD
AVB 4 Slim
Suitable for panel thicknesses of 14 mm and over For sturdy, positive fitting and friction locked worktop connections Quick and convenient bracing using a cordless screwdriver
or hexagon socket spanner size 4 AF Dowel length 42 - 49 mm Housing hole diameter 25 mm Drilling depth at least 12.5 mm Housing: zinc die-cast Bolt / counterplate: steel, galvanised
Page reference: For drill bits for hand and pillar drills, see page 1219
Order no. PU
9 085 654 1/50 ea.
≥ 7
≥ 14
ø 25ø 25
42 - 4942 - 49
SW 4
12,5 5,5
Worktop connectorsAVB 4 Slim
806 www.hettich.com
HettCAD
AVB 5
For sturdy, positive fitting and friction locked worktop connections With two curved clamping plates Two premounted clips ensure easy installation:
They hold the clamping plates and connectors in position or groove, permitting easy insertion into drilling or routed recess – while leaving both hands free for bracing
Housing hole diameter 35 mm Drilling depth at least 20 mm Steel, galvanised
Page reference: For drill bits for hand and pillar drills, see page 1219
Dimension X mm Length mm Order no. PU
30 - 37 65 0 025 084 1/50 ea.
48 - 55 100 0 079 386 1/50 ea.
73 - 80 150 0 016 048 1/50 ea.
1. 2.
20
15
XX
ø 35 ø35ø 35
GrooveClipsClips
Worktop connectorsAVB 5
807Technik für Möbel
HettCAD
EverFix with threaded stud
This inconspicuous connecting fitting merely consists of a threaded stud and a knock in socket with spring steel disc
Components can easily be pressed together by hand to produce a non detachable connection
Pull-out strength 500 N
Page reference: For drill bits for hand and pillar drills, see page 1219 For hole marking jig, see page 1186
Finish / colour Order no. PU
white / galvanised 0 079 118 1/200 ea.
Carcase construction
Leg-to-surface connection
Drawer connection
Fascia connection
9,5
ø 5
ø 12 ≥ 13
≥ 16,5
≥ 13
≥ 3
EverFix with Duplo
This inconspicuous connecting fitting merely consists of a threaded stud and a knock in socket with spring steel disc
Components can easily be pressed together by hand to produce a non detachable connection
Pull-out strength 500 N
Page reference: For drill bits for hand and pillar drills, see page 1219 For hole marking jig, see page 1186
Finish / colour Order no. PU
white / galvanised 0 079 119 1/200 ea.
PU 200 = 400 Everfix + 200 Duplo
Column connection
9,5
ø 12
≥ 13
Non detachable connecting fittingEverfix
808 www.hettich.com
HettCAD
MultiClip
MultiClip can be used in many different applications For wall panelling, room dividers, cladding pillars, ceiling
panelling, fascias and cladding of all types In all applications, the fitting can be screw mounted either parallel or
at right angles to the fascia or cladding component If it is necessary to slide the clip connectors on from the front,
one of the fittings is screw mounted at an angle of 90° Whether for interior fittings, contract work or volume production,
this fitting is a cost-saver - always and everywhere Only 1 fitting component for all types of application The clip connector components provide a secure hold with spring
loaded flexible clamps and serrated surfaces Variable screw on positions permit to hooking in
from above, from the front, from the side as well as flush fitted Compensation for mounting tolerances Clip connectors can be adjusted for perfect alignment Thermoplastic material, black (heat resistant)
Order no. PU
0 046 080 1/200 ea.
6
6
32
32
32
44
64
15
ø 4
Clip connectorMultiClip
809Technik für Möbel
HettCAD
VB 90
This fitting is ideal for connecting cabinet elements or front panel components positioned at extreme angles
E.g. cabinets fitted under sloping ceilings or angled combinations in the office furniture segment
The joint adjusts to all angles from 30° to 270° Zinc die-cast nickel plated Attached with screws for direct fixing in holes with 5 mm diameter or
with M6 hexagon head screw and sleeve No. 100 for drilling diameter 10 mm, sleeve, see page 820, 822
The VB 90 is incredibly easy to install: To begin with, the fitting is attached to the first side and then pushed onto a screw premounted on the second side. If doors are to open by an angle of less than 90°, a hexagon head screw should be used for this purpose so as to permit final fixing with an open ended spanner.
Order no. PU
0 030 891 1/100 ea.
6,5 24
1616
128
4 thick
Mitre connectorVB 90
810 www.hettich.com
HettCAD
VB 16
The wide clamping range from 36 to 46 mm accommodates all profile cross-sections
The high clamping force presses the mitres together to produce a tight fit
Zinc die-cast, galvanised
Page reference: For drill bits for hand and pillar drills, see page 1219
Order no. PU
0 021 768 1/100 ea.
SW 10
ø 9 - 10
36 - 46
≥ 10
VB 160
For shallow door frames or cornices Recess depth 10 mm Housing: brown plastic
Angle: steel, galvanised
Page reference: For drill bits for hand and pillar drills, see page 1219
Order no. PU
0 047 608 1/100 ea.
20,5 20,5
ø 20
Mitre connectorVB 16, VB 160
811Technik für Möbel
HettCAD
Rear panel connector RV 1
Can be mounted in a hole line hole diameter of 5 mm Fitting holds rear panel tight against carcase side Zinc die-cast nickel plated Can be used in System 32
Page reference: For rear panel screws, see page 823
Article version Order no. PU
without direct fixing screw 0 019 558 1/100 ea.
37
15
ø 10
ø 5
15
2,2
≤ 5
Rear panel connector RV 3
Oblong hole compensates drilling tolerances Attachment with direct fixing screw ø 6.3 mm Zinc die-cast nickel plated
Page reference: For direct fixing screws, see page 822
Finish / colour Order no. PU
nickel plated 0 079 661 1/100 ea.
15
15
ø 10
11,5
≤ 5
Rear panel connectorRV 1, RV 3
812 www.hettich.com
HettCAD
Rear panel connector RV 7 D
With the RV 7 D, the rear panel is secured from the inside This makes assembly work easier because the cabinet can be
assembled off the wall The RV 7 D can be mounted with various fixing elements: with
countersunk screw, with M6 x 12 panhead screws (DIN 7985) and threaded cap or socket, with direct fixing screw or with the MultiClip
Height adjustable by +/- 1 mm at oblong hole Zinc die-cast nickel plated Can be used in System 32
Order no. PU
0 056 614 1/100 ea.
32
ø 1615
37ø 5
ø10
32
ø 16
37ø 5
15 32
ø 16
37ø 5
Flush overlay back panel(min. 16 mm), mounting withraised head screw M 6 x 12(DIN 7985) and socket No. 1
Flush overlay back panel(min. 16 mm), mountingwith raised head screwM 6 x 12 (DIN 7985) withthreaded cap M6
Rebated back panel, mountingwith Panhead screwdiameter 4 x 12 mm
Examples of application RV 7D
19
15
32
16
37
32
ø 16
37ø 5
Centre panel mountingwith Panhead screwdiameter 4 x 12 mm
Flush overlay back panel,mounting with MultiClip
Accessories, RV 7 D / fixing elements
Article version Dimensions mm Order no. PU
Direct fixing screw ø 6.3 x 13 0 040 007 200 ea.
Countersunk head screw ø 3.5 x 12 mm 0 058 244 200 ea.
Panhead screw ø 4 x 12 0 058 243 200 ea.
Oval head screw M6 x 12 0 058 242 200 ea.
Threaded cap, white 0 058 301 1/1000 ea.
Socket No. 100 M6 0 079 540 1/200 ea.
MultiClip 0 046 080 1/200 ea.
Rear panel connectorRV 7 DFixing elements
813Technik für Möbel
HettCAD
Rear-panel connector RV 8
For fixing drawer bottom panels and rear panels Plastic, white Screw ø 3.5 x 20 mm galvanised
Order no. PU
0 079 438 1/200 ea.
154,7
10,7
Rear panel connectorRV 8
814 www.hettich.com
HettCAD
VB 15
Includes plastic spacer, 2 mm thick Steel, galvanised
Order no. PU
0 079 666 1/100 ea.
4
2
70
Connecting plate for front panels
Steel, galvanised
Length mm Order no. PU
80 0 079 664 1/50 ea.
200 0 044 744 1/50 ea.
2,5
20ø 4,5
200
80 474713
16
ø 5,5
7,5 17,5 30 17,5
80
2
Front panel connectorVB 15, connecting plate
815Technik für Möbel
HettCAD
Euro angle for 32 mm hole line
Can be used as a multi-purpose connecting fitting for carcases, shelves, rear panels and drawer fronts
Connecting angles: steel, galvanised Plastic cover cap Direct fixing screws, ø 6.3 mm Can be used in System 32
Page reference: For direct fixing screws, see page 822
Article version Finish / colour Order no. PU
Connecting angles galvanised 0 024 832 1/200 ea.
Cover cap white 0 050 314 1/200 ea.
Cover cap brown 0 050 313 1/200 ea.
Cover cap black 0 072 026 1/200 ea.
Cover cap grey 0 070 292 1/200 ea.
2
7
25
15
11,5
ø 7
20,7 16
4232
50
43,5
37
16
37
Connecting anglesEuro angle
816 www.hettich.com
Universal corner connector
Connecting elementsUniversal corner connector
Universal corner connector for small cabinet bodies and for supporting low loads
For attachment with 3.5 mm ø countersunk head screw The moulded on cover cap closes off the corner connector and
conceals the screws Plastic
Colour Order no. PU
white 0 044 742 1/100 ea.
black 0 044 743 1/100 ea.
22
24
22
9
942
12
24
12 ø 4
ø 3,5
817Technik für Möbel
HettCAD
Universal angle 41.5 x 41.5 mm
2
17,5
16,5
16
ø 5,5
41,5
41,5
Steel, galvanised
Order no. PU
0 025 197 1/100 ea.
Universal angle 31 x 31 mm
25
1325
6,5 12
31ø 4,5
132531
ø 4,5
Steel, galvanised
Order no. PU
0 079 665 1/100 ea.
Keyhole fitting, 42 mm14,5
20 6,3 32 42
2
ø 4,85
Steel, galvanised
Order no. PU
0 025 193 1/100 ea.
Keyhole fitting 62 mm
6,522 6244
1218
2
ø 4,8
Steel, galvanised
Order no. PU
0 025 194 1/100 ea.
Connecting angles and keyhole fittingsUniversal angle, keyhole fitting
818 www.hettich.com
HettCAD
Direkta 2
ø 7
ø 5 With drilled head and Pozidrive screw Steel, galvanised
Page reference: For step drill bits for upright and hand drills, see page 1219
Article version Length mm Order no. PU
Direkta 6.3 x 40 mm 0 019 555 1/500 ea.
Direkta 6.3 x 50 mm 0 019 556 1/500 ea.
Cover cap, white 0 016 339 1/500 ea.
Cover cap, brown 0 016 340 1/500 ea.
Connecting screws VS
ø 8
Wood thickness M6 thread for drilling diameter 8 mm PU 100 = 100 M6 steel pins + 100 threaded caps Steel, bright Plastic head: white or brown
Article version
Colour Panel thick-ness mm
Order no. PU
VS 26 white 26 - 31 0 008 954 1/100 ea.
VS 29 white 29 - 36 0 013 108 1/100 ea.
VS 29 brown 29 - 36 0 013 109 1/100 ea.
VS 34 white 34 - 41 0 013 110 1/100 ea.
VS 34 brown 34 - 41 0 013 111 1/100 ea.
VS 39 brown 39 - 46 0 013 113 1/100 ea.
VS 39 white 39 - 46 0 013 112 1/100 ea.
VS 44 white 44 - 51 0 013 114 1/100 ea.
VS 44 brown 44 - 51 0 013 115 1/100 ea.
VS 49 white 49 - 56 0 008 956 1/100 ea.
Threaded cap VS
With M6 thread For drilling diameter of 8 mm Length 15 mm Plastic
Colour Order no. PU
white 0 058 301 1/1000 ea.
brown 0 067 200 1/1000 ea.
Connecting screwsDirekta, VS
819Technik für Möbel
Connecting screw VHS 32
ø 5
Wood thickness Unobtrusive carcase connectors for a particularly firm hold For drilling diameter of 5 mm The connecting sleeves are 27 or 35 mm long The threaded sleeve is set back, making it easier
to screw the connecting screw in Screw M4 x 15 mm / connecting sleeve: nickel plated steel
Article version Panel thickness mm
Order no. PU
VHS 32 / 35 28 - 36 0 079 659 1/100 ea.
VHS 32 / 35 36 - 44 0 079 660 1/100 ea.
Connecting screws, end screws and sleevesVHS 32, End screws, sleeves
End screw
L
ø 9M 4 M4 thread
Suitable for use with M4 threaded sleeve, see below Pozidrive screw Steel, galvanised
Length mm Order no. PU
8 0 079 525 200 ea.
Threaded sleeve
L
For M4 thread For drilling diameter of 5 mm Suitable for use with end screw, see above Steel, galvanised
Length mm Order no. PU
15 0 063 016 1/200 ea.
18 0 064 908 1/200 ea.
22 0 063 017 1/200 ea.
820 www.hettich.com
Socket no. 49
ø 8
11
For M6 thread Drilling diameter 8 mm Suitable for use with Rastex 15 / 25, VB 20 / 21 and VB 35 / 36 Plastic, white
Order no. PU
0 040 005 1/200 ea.
Socket no. 30
ø 8
8
For M4 thread Drilling diameter 8 mm Suitable for use with Rastex 15 / 25, VB 35 / 36 and VB 135 Plastic, white
Order no. PU
0 079 529 1/200 ea.
Socket no. 33
ø 10
11
Drilling diameter 10 mm Suitable for use with Rastex 15 / 25, VB 20 / 21 and VB 35 / 36 Plastic, white
Order no. PU
0 079 539 1/200 ea.
Socket No. 100
13
ø 10
For M6 thread Drilling diameter 10 mm Suitable for use with Rastex 15 / 25 and VB 35 / 36 Plastic, white
Order no. PU
0 079 540 1/200 ea.
SocketsPlastic sockets
821Technik für Möbel
Socket M5 x 11 mm for folding door hinge 625
11
ø 10
For M5 thread Drilling diameter 10 mm Plastic, white
Order no. PU
0 078 920 1/200 ea.
Plastic expanding socket3 - 4
ø 6,3
ø 8
11
To secure fittings to lightweight panels with face layers of 3 - 4 mm Suitable for fittings with a resting load (known as static load) such as
shelf supports, cabinet rail supports or rear panel connectors For drilling diameter of 8 mm Suitable for 6.3 mm direct fixing screw Plastic, white
Order no. PU
9 079 736 1/500 ea.
Expanding socket
ø 5
7,8
For M4 thread Drilling diameter 5 mm Suitable for use with Rastex 15 / 25, VB 20 / 21 and VB 35 / 36 Brass, bright
Order no. PU
0 048 578 1/200 ea.
Expanding socket
ø 8
12
For M6 thread Drilling diameter 8 mm With nylon ball, length 12 mm Suitable for use with Rastex 15 / 25, VB 20 / 21, VB 35 / 36 and VB 135 Brass, bright
Article version Length mm Order no. PU
with nylon ball 12 0 079 538 1/200 ea.
SocketsPlastic sockets, expanding sockets
822 www.hettich.com
Shallow countersunk head
Shallow countersunk head Pozidrive screw Steel, galvanised
Dimensions mm Order no. PU
ø 4.5 x 13.5 0 073 751 200 ea.
ø 6.3 x 10.5 0 051 264 200 ea.
ø 6.3 x 11 0 047 451 200 ea.
ø 6.3 x 12.5 0 073 752 200 ea.
ø 6.3 x 14 0 051 265 200 ea.
ø 6.3 x 15 0 073 889 200 ea.
ø 6.3 x 18 0 052 799 200 ea.
Deep countersunk head
Deep countersunk head Pozidrive screw Steel, galvanised
Dimensions mm Order no. PU
ø 6.3 x 10.5 0 073 890 200 ea.
ø 6.3 x 14 0 047 452 200 ea.
Handle fixing screws
M4 thread Cross recessed head and double slot Steel, galvanised
Length mm Order no. PU
12 0 071 544 50 ea.
14 0 071 545 50 ea.
16 0 071 546 50 ea.
18 0 071 547 50 ea.
20 0 071 548 50 ea.
22 0 071 549 50 ea.
24 0 071 555 50 ea.
26 0 071 556 50 ea.
28 0 071 557 50 ea.
30 0 071 558 50 ea.
32 0 071 559 50 ea.
34 0 071 560 50 ea.
36 0 071 561 50 ea.
38 0 071 562 50 ea.
40 0 071 563 50 ea.
42 0 071 855 50 ea.
45 0 071 856 50 ea.
ScrewsDirect fixing screws, handle fixing screws
823Technik für Möbel
Panhead
Panhead Pozidrive screw Steel, galvanised
Dimensions mm Order no. PU
ø 3.5 x 12 0 045 167 200 ea.
ø 3.5 x 20 0 045 168 200 ea.
ø 4 x 12 0 058 243 200 ea.
Countersunk head
Countersunk head Pozidrive screw Steel
Dimensions mm Finish Order no. PU
ø 3.5 x 12 nickel plated 9 079 791 200 ea.
ø 3.5 x 12 galvanised 0 058 244 200 ea.
ø 3.5 x 13 nickel plated 0 048 296 200 ea.
ø 3.5 x 16 nickel plated 0 071 925 200 ea.
ø 3.5 x 9.5 nickel plated 0 041 296 200 ea.
ø 4 x 16 nickel plated 0 010 085 200 ea.
Special screw, ø 5 mm
ø 5 mm For attaching the drawer front panel Pozidrive screw Steel, galvanised
Length mm Order no. PU
14 0 076 222 200 ea.
16 0 052 996 200 ea.
Special screw, ø 6.3 mm
ø 6.3 mm For attaching the drawer front panel For 5 mm ø drilling Pozidrive screw Steel, galvanised
Length mm Order no. PU
14 0 046 700 200 ea.
16 0 046 701 200 ea.
Rear panel screw 3 x 20 mm
ø 3 x 20 mm For attaching the rear panel Pozidrive screw Steel, galvanised
Order no. PU
0 016 190 500 ea.
ScrewsChipboard screws, special screws
824 www.hettich.com
Oval head screw
M6 x 12 mm Pozidrive screw Steel, nickel plated
Order no. PU
0 058 242 200 ea.
ScrewsOval head screws
825Technik für Möbel
HettCAD
For drilling diameter of 5 mm
ø 13
5,5
For drilling diameter of 5 mm Plastic
Colour Order no. PU
white 0 048 586 1/1000 ea.
brown 0 048 587 1/1000 ea.
black 9 132 020 1/1000 ea.
beige 9 132 021 1/1000 ea.
grey 9 132 022 1/1000 ea.
For drilling diameter of 8 mm
6,5
ø 13 For drilling diameter of 8 mm Plastic
Colour Order no. PU
white 0 048 588 1/1000 ea.
brown 0 048 589 1/1000 ea.
beige 0 062 204 1/1000 ea.
black 9 132 023 1/1000 ea.
grey 9 132 024 1/1000 ea.
For drilling diameter of 10 mm
6,5
ø 13 For drilling diameter of 10 mm Plastic
Colour Order no. PU
white 0 048 590 1/1000 ea.
brown 0 048 591 1/1000 ea.
grey 9 132 025 1/1000 ea.
black 9 132 026 1/1000 ea.
beige 9 132 027 1/1000 ea.
Cover capsFor drilling diameters of 5, 8, 10 mm
826 www.hettich.com
Added convenience for slatted bed bases: the Rastomat telescop-ic fitting engages head and foot board at any setting without hav-ing to return to the home position.
Extra shallow: MultiFlex is the adjustable fitting with an extremely shallow installed height. Quickly hooks into place for easy instal-lation.
For multifunctional upholstered furniture: the FrankoFlex neck and arm rest adjuster conveniently adjusts in steps.
More functions – more buyers. Hettich makes seating and beds even more comfortable and convenient. And more attractive to furniture buyers. Hettich adjustable fittings bring many additional and innovative benefits to easy
chairs, sofas and beds. For example, variable positions for seats, back and arm rests. Our wide choice of fittings lets you provide upholstered furniture and beds with a host of adjustment functions.
Adjustment systems for seating and beds
827Technik für Möbel
Connecting fittings for beds Bed connecting fitting with hook, angled bed fitting, StabiloFix, VariFix, supporting leg for centre rail and connector for centre rail 828 - 831
Adjustment fittings for beds Rastomat, MultiFlex, touch activated opening fitting, bed frame wheel 832 - 834
Neck and arm rest adjuster for seating and beds FrankoFlex 835
SchwenkFix lid fitting for installation in chests and corner benches 835
Adjustment systems for seating and bedsSummary
828 www.hettich.com
HettCAD
Bed connecting fitting 130 mm
Hook component with 3 hooks Tried and proven sturdy fitting for hook in assembly Steel, galvanised
Set comprises: 2 hook-in parts, right 2 hook-in parts, left 4 universal caps left / right
Order no. PU
0 025 183 1/10 pair
ø 4 x 17
ø 4 x 25
1
Side panel
Head board /foot board
5,3
10
8
35
44130
35
26
5,7
38108
127
8
15
8
17
Bed connecting fitting 100 mm
Hook component with 2 hooks Particularly suitable for narrow sided beds Steel, galvanised
Set comprises: 2 hook in parts, right 2 hook in parts, left 4 universal caps left / right
Order no. PU
0 025 185 1/10 pair
ø 4 x 17
ø 4 x 25
1
Side panel
Head board /foot board
10
20
39
20
5,5
100
9
37,519
100
32
17
32
5
15
8,5
9,5
Connecting fittings for bedsBed connecting fitting with hook
829Technik für Möbel
HettCAD
Angled bed fitting 127 mm
Offset screw holes, in 32 mm hole line system Complete with M6 x 13 sockets and M6 x 12 screws Steel, galvanised
Order no. PU
0 025 189 1/40 ea.
ø 10
13,5
96
16 22
6,213,521,5
127
32
32
5,5
30
32
11,5
18,5
166,2
11
Angled bed fitting 226 mm
Screw holes in 32 mm hole line system Particularly suitable for high sided beds Complete with M6 x 13 sockets and M6 x 12 screws Steel, galvanised
Order no. PU
0 047 635 1/40 ea.
ø 10
13,5
96
17
96
16 22
6,213,5
226
64
64
32
17
32
4,5
3122
12
20
Connecting fittings for bedsAngle bed fitting
830 www.hettich.com
HettCAD
StabiloFix
For knock down sprung beds or underbed storage boxes High strength Tightening screw compensates for tolerances of up to 4 mm Steel, galvanised
Order no. PU
0 047 634 1/40 ea.
18,5
45
Side panel
Head board /foot board
5,3
52
24
4525
52
12,5
17
10
34
90
32
32
43,522
13
VariFix
For single and double beds Also suitable for double beds with centre support rail The height of the supports for slatted mattress bases or upholstery
can be adjusted in 3 stages of 24 mm each Steel, galvanised Load capacity 400 kg / ea.
Order no. PU
0 047 633 1/40 ea.
70
35
64
139,5
36 4,2
8
12 *
48
35
* Offset for centre railmeasuring 35 mm thick
Support for bed frame Support for
centre rail
Connecting fittings for bedsStabiloFix, VariFix
831Technik für Möbel
HettCAD
Supporting leg for centre rail
Adjustment by hand or screwdriver Inserts into hole drilled in centre rail Plastic, black Load capacity 450 kg / ea.
Dimension X mm Adjustment mm Order no. PU
150 -22/+96 0 047 630 1/20 ea.
170 -22/+96 0 047 631 1/20 ea.
190 -42/+76 0 047 632 1/20 ea.
ø 35
x
+-
25
Hole size
Centre rail
VariFix
Supporting leg
Centre rail connector
For wooden or metal beds Can also be used for sprung beds Width of the centre rail over 70 mm Steel, galvanised Load capacity 100 kg / ea.
Order no. PU
0 025 182 1/40 ea.
8
Centre rail≥ 70 - 90 mm wide
Head board /foot board
38,5
69
24
52
ø 6,5
24 3118,5
38,5
67,5
21 21
ø 5
Connecting fittings for bedsVariFixSupporting leg and connector for centre rail
832 www.hettich.com
Rastomat
Adjustable fitting for head and foot ends Also suitable for height adjustable desktops,
deck chairs and all types of flaps The fitting engages in any notch without having
to return to the home position Rugged construction Safety feature prevents over extension The spacer disks required are included in the pack Steel, galvanised Load capacity 180 kg / ea.
Number of notches Order no. PU
5 0 025 175 1/10 ea.
10 0 025 174 1/10 ea.
ø 6
12
M 6
Inner frameSpacer disc
Outer frame
http://www.hettich.com/short/582776
X
11 ø 8,2
30
9,5
141 - 146 mm for 5 notches
214 - 219 mm for 10 notches
Dimension x mm
Position of notches Dimension x mm for articles with 5 notches
Dimension x mm for articles with 10 notches
1 R 164 2355 R 214 28910 R 355
Adjustment fittings for bedsRastomat
833Technik für Möbel
MultiFlex
Adjustable fitting for head and foot ends 13 engagement positions Extremely compact design Easy, fast installation Steel, galvanised Load capacity 140 kg / ea.
Order no. PU
0 025 173 1/4 ea.
195
X
≥ 45
18
18
5
195
31
http://www.hettich.com/short/132729
Space X mm
Position Space X mm0 51 292 693 994 1245 1436 1607 1768 1939 20710 22311 24012 25713 278Stop mm (max. opening)
332
Adjustment fittings for bedsMultiFlex
834 www.hettich.com
Touch activated opening fitting for single beds, bunk beds and sprung beds
All riveted connections with washers for stability Spring force assists the swing action Weight of mattress base including mattress 25 kg Design inset constructions so that the support rests on the
substructure on all 4 sides A plastic fitting cover protects the bed linen in the underbed box Only available as a pair comprising one left-hand
and one right-hand fitting With 4 tension springs per set Steel, white coated
Order no. PU
9 132 738 1 pair
ø 6,2
40°
61
~ 154 97
67
118 4081
ø 6,2
ø 6,5
150
Bed frame wheel
Large size wheel diameter with wide tread Plastic, white Can be fitted with VS connecting screws, please order separately
Page reference: For VS connecting screws, see page 818
Order no. PU
0 047 636 1/40 ea.
84,5
11,59,5
ø 8,5
Adjustment fittings for bedsTouch activated opening fitting, bed frame wheel
835Technik für Möbel
FrankoFlex
10 engagement positions Adjustment range of 90° Engages every 9° for precision adjustability Can be mounted on either wood or tubular steel frames Fixing holes on the 32 mm hole line system Slim-line, narrow design for mounting versatility Enclosed design ensures functional safety Steel, galvanised Load capacity 220 Nm / ea.
Basic position in ° Order no. PU
90 0 044 745 1/10 ea.
90°
Chan
geov
er 1
8°
10. n
otch
90°
5. Ra
ste 45
°
1ste arrêtering 9°
FrankoFlexBasic position 90°
29
240
16
3264
96
64
ø 6,2
ø 6,2
4
15
4
ø 50
32
16
http://www.hettich.com/short/a8c517
SchwenkFix
For chests and corner benches Opening angle 95° The fitting lifts up far enough to keep the lid standing
upright in the open position Suitable for upholstery up to 50 mm thick Keyholes in the mounting angle make it easy to hook in
and align the lid when installation Only available as a pair comprising one left-hand and
one right-hand fitting Steel, galvanised
Order no. PU
0 030 864 1/10 pair
27
2616
64150
27
95°
64
44
≤ 19
Neck and arm rest adjuster for seating and beds / lid fittingFrankoFlex, SchwenkFix
836 www.hettich.com
Each with a load capacity of up to 450 kg: the Korrekt is fix-ing bock, height adjustable leg and plinth clip all in one. Simple adjustment by hand or screwdriver.
Sturdy quality in steel: galvanised steel leveller screw. With foot cap made of transparent plastic.
Standing firmly. Give furniture a solid foundation to stand on – with high-quality, robust plinths from Hettich. Durable quality materials and sturdy constructions guarantee high
load capacity. Hettich plinth height adjustment legs make sure your furniture stands firmly. Permanently.
Plinth adjustment fittings
837Technik für Möbel
Korrekt height adjustable leg with fixing blocks and accessories 838 - 842
Euro height adjustable leg with fixing blocks and accessories 843 - 845
Height adjustable leg with mount for plinth drawer 846 - 847
Systema Top 2000 plinth adjustment fitting for office furniture 848 - 849
Leveller screws 850 - 851
Plinth adjustment fittingsSummary
838 www.hettich.com
HettCAD
Korrekt levelling foot
Fitting system comprising levelling feet, fixing blocks, plinth clips and other accessories
Load capacity per leg 450 kg, maximum of 1350 kg for 3 or more legs Levelling foot is held securely in the fixing block when installing and
repositioning the cabinet Large contact surface of ø 78 or 80 mm Simple height adjustment Plinth drawers can be fitted from a plinth height of 150 mm Plastic, black
Plinth height dimension X mm Adjustment range mm Floor contact surface ø mm Order no. PU
50 50 - 60 78 0 044 747 1/200 ea.
70 62 - 86 78 0 044 748 1/100 ea.
80 74 - 110 80 0 070 151 1/200 ea.
100 89 - 125 80 0 061 851 1/100 ea.
110 99 - 135 80 0 070 152 1/100 ea.
130 119 - 155 80 0 061 852 1/100 ea.
150 100 - 160 80 0 020 018 1/100 ea.
150 139 - 175 80 0 061 853 1/100 ea.
180 169 - 205 80 0 070 153 1/100 ea.
X
40
40
ø 8
39,5
40
ø 8
Height adjustable legKorrektLevelling foot
839Technik für Möbel
HettCAD
Adapter for levelling foot
X + 50
For extending the levelling foot by 50 mm Plastic, black
Order no. PU
0 071 844 1/40 ea.
Universal fixing block, for screwing on
25
ø 4 x 35
64
23,5
80
64
95
Plastic, black
Order no. PU
0 061 854 1/200 ea.
Universal fixing block, for pressing in, with 4 dowels
ø 10 x 11,5
25
64
21
92
80
64
With integrated mount for plinth clip (order no. 0 071 849, please order separately)
Plastic, black
Page reference: For plinth clip, see page 841
Order no. PU
0 047 654 1/40 ea.
Universal fixing block, for pressing in, with 2 dowels
ø 15 x 12
25
64
39,5
80
95
With integrated mount for plinth clip (order no. 0 071 849, please order separately)
Plastic, black
Page reference: For plinth clip, see page 841
Order no. PU
0 047 655 1/40 ea.
Height adjustable legKorrektAdapter, fixing block
840 www.hettich.com
HettCAD
Universal fixing block, for knocking in, with 2 expanding dowels
6
9 x 45°
25
64
39,5
80
92
ø 15 x 13 Can additionally be secured with screws Can be removed by pulling out the expanding dowels With integrated mount for plinth clip
(order no. 0 071 849, please order separately) With surface to support side panel Plastic, black
Page reference: Panel clip, see page 841
Order no. PU
0 079 689 1/40 ea.
Planform fixing block, for knocking in, with 3 expanding dowels
25
8 x 45°
ø 10 x 12
21 64
64
21
Also suitable for angled and round plinths Can additionally be secured with screws Can be removed by pulling out the expanding dowels With integrated mount for plinth clip
(order no. 0 079 694, please order separately) Drawing shows version with support surface Plastic, black
Page reference: For plinth clip, see page 841
Type Order no. PU
without support surface 0 074 668 1/200 ea.
with support surface 0 074 667 1/200 ea.
Planform fixing block, for screwing on
25
ø 4 x 35
21
72
16
40
16
72
2140
8 x 45°
Also suitable for angled and round plinths With integrated mount for plinth clip for plinth panels With surface to support side panel Plastic, black
Order no. PU
0 079 693 1/200 ea.
Height adjustable legKorrektFixing block
841Technik für Möbel
Plinth clip for Universal fixing block30
12 - 16
37
For front plinth panels, material thickness 12 - 16 mm Panel must be 4 mm lower than height of plinth Can be used in conjunction with pressing in / knocking
in Universal fixing block and Euro fixing block for screwing on, please order separately
plinth clip is clipped onto the front plinth panel and pushed sideways into the fixing block for installation
Plastic, white
Page reference: For Universal fixing block, see page 839 - 840 For Euro fixing block for screwing on, see page 844
Order no. PU
0 071 849 1/40 ea.
Plinth clip for Planform fixing block
For front and side plinth panels,, material thickness 19 mm Plinth panel must be 4 mm lower than height of plinth Suitable for use with Planform fixing block, please order separately plinth clip is pushed into the fixing block and the plinth panel subsequently clamped Plastic, white
Page reference: For Planform fixing block, see page 840
Order no. PU
0 079 694 1/200 ea.
Plinth clip for clipping onto levelling foot
3,2
6,3
1 Plinth
For front and side plinth panels Installation: clipping onto levelling foot Suitable for plinth heights of 70 mm and over Plastic, black
Type Order no. PU
1 for slotting in 0 073 481 1/200 ea.
2 for screwing on 0 061 855 1/200 ea.
TurboClip plinth clip
≥ 12
2
30
≥ 12
2
1
2
For front and side plinth panels, min. material thickness 12 mm For knocking in Plinth panel must be 2 mm lower than height of plinth Installation: plinth is clamped below the carcase The back of the plinth panel must rest against the fixing block and
levelling foot at the top and bottom Chrome plated steel
Type Order no. PU
1 for front plinths 0 079 690 1/20 ea.
2 for side plinths 0 079 691 1/20 ea.
Height adjustable legKorrektPlinth clip
842 www.hettich.com
Clip for plinth drawer
≥ 150
39,5
22
2
internal cabinet width - 119
Clip for connecting plinth drawers to FR 402 / 602 drawer runners, please order separately
Suitable for plinth heights of 150 mm and over The runners are mounted to the clips and
then clipped onto the levelling feet The height of the drawer off the floor always remains
the same even if plinth height is adjusted Plastic, black
Page reference: For FR 402 / 602 drawer runners, see Furniture Fittings and
Applications catalogue 2016, volume 1, chapter FR roller runners
Order no. PU
0 070 154 1/20 ea.
Height adjustable legKorrektClip for plinth drawer
843Technik für Möbel
HettCAD
Euro levelling foot
ø 50
X
Fitting system comprising levelling feet, fixing blocks and other accessories
Load capacity 450 kg / leg, maximum of 1350 kg for 3 or more legs Leg is securely held in the fixing block, simple height adjustment Plinth drawers can be fitted from a plinth height of 150 mm Plastic, black
Plinth height dimension X mm
Adjustment range mm
Order no. PU
100 95 - 123 0 071 840 1/40 ea.
130 115 - 143 0 071 841 1/40 ea.
150 145 - 173 0 071 842 1/40 ea.
180 165 - 193 0 071 843 1/40 ea.
Adapter for levelling foot
X + 50
For extending the levelling foot by 50 mm Plastic, black
Order no. PU
0 071 844 1/40 ea.
Fixing block, for screwing on
ø 58
25
25
ø 4 x 17
ø 50
7 x 45°
27
With surface to support side plinth panel Plastic, black
Order no. PU
0 071 847 1/40 ea.
Height adjustable legEuroLevelling foot, adapter, fixing block
844 www.hettich.com
HettCAD
Fixing block, for pressing in
ø 58
25
25
ø 25
27
ø 50
7 x 45°
With surface to support side plinth panel Plastic, black
Order no. PU
0 073 510 1/40 ea.
Fixing block, for screwing on
27
50
5025
25
7 x 45° ø 4 x 17
With integrated mount for plinth clip (order no. 0 071 849, please order separately)
With surface to support side plinth panel Plastic, black
Page reference: For plinth clip, see page 844
Order no. PU
0 071 848 1/40 ea.
Plinth panel holder, screw-on type
ø 4 x 7
For front and side plinth panels Installation: clipping onto levelling foot Plastic, black
Order no. PU
0 071 845 1/40 ea.
Plinth clip30
12 - 16
37
For front plinth panels, material thickness 12 - 16 mm Plinth panel must be 4 mm lower than height of plinth Suitable for use with fixing block order no. 0 071 848, see above Plastic, white
Order no. PU
0 071 849 1/40 ea.
Height adjustable legEuroFixing block
845Technik für Möbel
Clip for plinth drawer25
2725
≥ 150
2
internal cabinet width - 119
Clip for connecting plinth drawers to drawer runners, FR 302 / 402 / 602, please order separately
Suitable for plinth heights of 150 mm and over The runners are mounted to the clips and then clipped
onto the levelling feet The height of the drawer off the floor always remains
the same even if plinth height is adjusted Plastic, black
Page reference: For drawer runners FR 302 / 402 / 602, see Furniture Fittings and
Applications catalogue 2016, volume 1, chapter FR roller runners
Order no. PU
0 073 630 1/20 ea.
Height adjustable legEuroClip for plinth drawer
846 www.hettich.com
HettCAD
Height adjustable leg with mount for plinth drawers
Perfect combination of height adjustable leg and mount for plinth drawer
Can be used with drawer runners: - Actro with Silent System, please order separately - Quadro 25 and Quadro V6, please order separately Suitable for plinth heights of 150 mm and over Simple height adjustment Plinth drawer runs parallel with
carcase above it Runner can be fitted at a later stage Installed height can be adjusted at 5 mm intervals Can be installed between all cabinets even if adjacent
unit is a corner unit or oven unit Load capacity levelling foot 75 kg / ea. Drawer with 30 kg max. load capacity Aluminium profile can be shortened
Set comprises: 4 levelling feet, bright aluminium 2 runner profiles, steel Fixing material
Page reference:See Furniture Fittings and Applications catalogue 2016, volume 1, chapter double walled drawer system ArciTech, for Actro with Silent System InnoTech Atira, for Quadro 25 InnoTech Atira, for Quadro V6
Plinth height mm Adjustment range mm Order no. PU
150 145 - 172 0 013 297 1 set
Installation
1. 2.
3.
4.
Height adjustable legWith mount for plinth drawer
847Technik für Möbel
HettCAD
Installation dimensions
16 EB 12,5
16
16
18
19
16
EB 9,5
EB 12,5
EB 12,5
EB 10,5
EB 12,5
16
16
16
18
19
16
Quadro Actro
for panel thickness16 mm
for panel thickness16 mm
for panel thickness18 mm
for panel thickness16 mm
for panel thickness19 mm
for panel thickness16 mm
Flush fit
Leveller screw
25
37
37Y
57 25
34 128 5 x 32
65 30 20 170 58
ø 5,5
Plinth height
Stop required fordrawer front
Installation dimensions
X 1X 2
X 3X 4
X 5X 6 Y
Y
Quadro Actro
With ArciTech, height 94 mm: fixing point X 4 - X 6 usableWith ArciTech, height 126 mm: fixing point X 4 - X 5 usableWith InnoTech, height 70 mm: fixing point X 1 - X 6 usable
Fixing point Dimension Y for 150 mm plinth height
X 6 78.5
X 5 83.5
X 4 88.5
X 3 93.5
X 2 98.5
X 1 103.5
Height adjustable legWith mount for plinth drawer
848 www.hettich.com
HettCAD
Plinth adjustment fitting Systema Top 2000 for side panel
For cabinets with a plinth height of at least 60 mm, continuous side panel or separate plinth
Particularly suitable for office cabinets, partitions and wall-to-wall units
Adjustment range 60 - 80 mm or 80 - 120 mm Height can be adjusted through the bottom panel (4 mm AF)
Easy installation in System 32 in combination with eccentric cam connecting fittings VB 20 / 21, see page 783 - 785
Adjustment can be made through the connecting fitting The plinth clip is designed for a space of 37 mm
from plinth rear face to spindle centre The groove for the clip in the front plinth is positioned for the centre
of the housing. However, the clip can also be used at any other height position within the housing, see drawing
The plinth adjustment fitting has a load capacity of 300 kg / each, 900 kg max. for three or more legs
The direct spindle guide inside the housing makes sure furniture stands firmly
Since the plinth adjustment fitting is symmetrical, it can be used on the left or right
Can be used in System 32 Steel, white plastic
Adjustment range mm Order no. PU
60 - 80 0 040 438 1/100 ea.
80 - 120 0 047 647 1/100 ea.
60
20
80
40
20
20
12,8
ø 46
ø 46
32
ø 1513SW 4
15,5ø 10
ø 4,5 x 40
37
3
7
13
4860-80
80-120
SW 4
Plinth adjustment fittingSystema Top 2000For side panel
849Technik für Möbel
HettCAD
Plinth adjustment fitting Systema Top 2000 for centre panel
For cabinets with a plinth height of at least 60 mm, continuous side panel or separate plinth
Particularly suitable for office cabinets, partitions and wall-to-wall units
Adjustment range 60 - 80 mm or 80 - 120 mm Height can be adjusted through the bottom panel (4 mm AF)
Easy installation in System 32 in combination with eccentric cam connecting fittings VB 20 / 21, see page 783 - 785
Adjustment can be made through the connecting fitting The plinth clip is designed for a space of 37 mm
from plinth rear face to spindle centre The groove for the clip in the front plinth is positioned for the centre
of the housing. However, the clip can also be used at any other height position within the housing, see drawing
The plinth adjustment fitting has a load capacity of 300 kg / each, 900 kg max. for three or more legs
The direct spindle guide inside the housing makes sure furniture stands firmly
Since the plinth adjustment fitting is symmetrical, it can be used on the left or right
Can be used in System 32 Steel, white plastic
Adjustment range mm Order no. PU
60 - 80 0 040 439 1/100 ea.
80 - 120 0 047 648 1/100 ea.
60
20
80
40
20
20
9
ø 46
ø 46
SW 4
32ø 15
9
≥ 19
ø 4 x 60
37
3
7
13
4860-8080-120
Plinth adjustment fittingSystema Top 2000For centre panel
850 www.hettich.com
HettCAD
Leveller screw with M8 thread
6
M 8
ø 30
5
ø 32
X
With foot cap Steel, galvanised / clear plastic
Dimension X mm Order no. PU
50 0 047 637 1/50 ea.
60 0 047 638 1/50 ea.
70 0 047 639 1/50 ea.
80 0 047 640 1/50 ea.
100 0 047 642 1/50 ea.
Captive nut with M8 thread
ø 22 ø 9,5
M 8
Steel, bright
Order no. PU
0 047 643 1/50 ea.
Supporting plate with M8 thread6040 10
20
305,5
M 83
Steel, galvanised
Order no. PU
0 047 645 1/50 ea.
Metal angle with M8 thread
ø 12,4
M 8
2937
40ø 5,4
5,5 26
12 16
20,5
20,5
Steel, galvanised
Order no. PU
0 047 644 1/50 ea.
0 071 870 1/250 ea.
Leveller screwsM8 threadAccessories
851Technik für Möbel
Adjustment fitting for cabinets with blind panels
4ø 20
M 8
72
ø 9,5
4
65
ø 20
The fitting allows a cabinet with blind panel to be braced and horizontally aligned between floor and ceiling
Steel, galvanised
Page reference: For drill bits for upright and hand drills, see page 1219
Order no. PU
0 031 571 1/20 ea.
Leveller screw with M10 threadM 10
SW 14
ø 4,5
35ø 47
10
80
For aligning shelf units, room dividers and partitions With adjustment nut and steel foot Steel, galvanised
Order no. PU
0 025 166 1/50 ea.
Leveller screw with M10 thread
M 10
SW 14
20
ø 45
70
For aligning shelf units, room dividers and partitions With adjustment nut and impact resistant plastic foot Steel, galvanised, black plastic
Order no. PU
0 047 646 1/50 ea.
Tube cap with M10 thread30
5
25
22,5
For 30 x 30 x 2.5 mm square tubes Zinc die-cast
Order no. PU
0 025 170 1/50 ea.
Leveller screwsM8 thread, M10 threadAccessories
852 www.hettich.com
Sekura 2 shelf support in nickel plated die-cast zinc.
Vari shelf support rail, aluminium, for slotting in.
Titan shelf support for concealed installation behind the shelf.
TT shelf support for mounting shelves on the wall.
Some Hettich shelf supports can do more than just support shelves: for example, they prevent shelves from being acci-dentally lifted or pulled forward and from tipping or slipping. A minor detail that can prevent a major disaster from hap-
pening. This is where you will find the right supports and holders for any fitted cupboard. Firm and secure support elements for your shelf. And a reliable and easy to fit solution for any design of furniture.
Shelf supports / rails and brackets
853Technik für Möbel
Shelf supports Safety, Sekura, Universal D, Universal K, Duplo, push in shelf supports, Glass shelf supports, flattened shelf supports, grooved shelf supports, Shelf studs 854 - 858
Shelf support rails for recessing into the carcase side Vari aluminium, Vari steel 859
Shelf supports, pull-out shelf supports for supporting shelves, for mounting on walls Titan 1 with side adjustment, Titan 1, Titan 2, Titan 3, pull-out shelf support TT 860 - 863
Shelf supports / rails and bracketsSummary
854 www.hettich.com
HettCAD
Safety
8
4 ø 3 / 4 / 5 / 6
Steel pin with plastic support surface Can be used in System 32 Load group L 50 (50 kg/m²)
Drilling diameter mm
Colour Order no. PU
3 translucent 0 022 534 1/500 ea.
4 translucent 0 022 533 1/500 ea.
5 translucent 0 016 180 1/500 ea.
5 white 0 025 090 1/500 ea.
5 brown 0 025 091 1/500 ea.
6 translucent 0 022 532 1/500 ea.
Sekura 1.1
8
5
7,5ø 5
10ø 5
Pin diameter 5 mm 1 additional pin for shelf Can be used in System 32 Load group L 75 (75 kg/m²) Zinc die-cast nickel-plated
Order no. PU
0 019 557 1/500 ea.
Sekura 2
8
5
ø 5
Pin diameter 5 mm Can be used in System 32 Load group L 75 (75 kg/m²) Zinc die-cast nickel-plated
Order no. PU
0 025 100 1/500 ea.
Sekura 2.1
8
5
ø 5
Pin diameter 5 mm Can be used in System 32 Load group L 75 (75 kg/m²) Zinc die-cast nickel plated
Order no. PU
9 134 679 1/500 ea.
Shelf supportSafety, Sekura
855Technik für Möbel
HettCAD
Sekura 6
8
8
12,5 ø 5
12ø 5
Pin diameter 5 mm 1 additional pin for shelf Can be used in System 32 Load group L 75 (75 kg/m²) Zinc die-cast nickel plated
Order no. PU
0 079 707 1/500 ea.
Sekura 7
8
ø 5
12ø 5
12,5
8ø 3
12ø 5
12,5
Drilling diameter 5 mm for direct fixing screw, Countersunk head, ø 6.3 mm
Drilling diameter 3 mm for countersunk head screw ø 4 mm Each with one additional pin for shelves Zinc die-cast nickel plated Can be used in System 32 Load group L 75 (75 kg/m²)
Drilling diameter mm Order no. PU
3 0 079 711 1/500 ea.
5 0 053 012 1/500 ea.
Universal K
ø 5
7
Pin diameter 5 mm Can be used in System 32 Load group L 25 (25 kg/m²) Plastic white
Order no. PU
0 044 751 1/500 ea.
Universal D
8
2
ø 5
Pin diameter 5 mm Can be used in System 32 Load group L 75 (75 kg/m²) Zinc die-cast nickel-plated
Order no. PU
0 022 737 1/500 ea.
Shelf supportSekura
856 www.hettich.com
HettCAD
8
ø 5
ø 5
0,5
Duplo
Pin diameter 5 mm on both sides Steel Can be used in System 32 Load group L 50 (50 kg/m²)
Finish Order no. PU
nickel plated 0 046 642 1/500 ea.
galvanised 0 013 138 1/500 ea.
Push in shelf supports
ø 5
2,524
Drilling diameter 5 mm Can be used in System 32 Load group L 50 (50 kg/m²) Steel, galvanised
Order no. PU
0 025 124 1/500 ea.
Push in shelf supports with shoulder
3,75 8
ø 5
Pin diameter 5 mm Can be used in System 32 Load group L 50 (50 kg/m²) Steel, galvanised
Order no. PU
0 016 181 1/500 ea.
Sekura 8
8
5
ø 5
Glass shelf supports Pin diameter 5 mm Can be used in System 32 Load group L 75 (75 kg/m²) Zinc die-cast nickel plated / clear plastic
Order no. PU
0 047 609 1/500 ea.
Shelf supportDuplo
857Technik für Möbel
HettCAD
Alfa Glass
10
ø 5
13
722
8 - 12
9
2,9
Quick locking shelf support for glass shelves For glass thicknesses 8 - 12 mm Drilling diameter 5 mm Can be used in System 32 Load group L 25 (25 kg/m²) Zinc die-cast nickel plated
Order no. PU
9 131 209 1/500 ea.
Glass shelf supports
8
ø 3 / 5
With soft plastic cap Load group L 50 (50 kg/m²) Steel, galvanised / clear plastic
Drilling diameter mm Order no. PU
3 0 079 710 1/500 ea.
5 0 079 709 1/500 ea.
Glass shelf supports in plastic
2,5ø 5
7,5≤ 6
With tilt prevention Pin diameter 5 mm Can be used in System 32 Load group L 25 (25 kg/m²) Plastic translucent
Order no. PU
0 073 615 1/500 ea.
Glass shelf supports
ø 58
4 - 6 3,6
For glass thicknesses 4 - 6 mm With tilt prevention Drilling diameter 5 mm Can be used in System 32 Load group L 25 (25 kg/m²) Zinc die-cast nickel plated / clear plastic
Order no. PU
9 080 214 1/500 ea.
Shelf supportGlass shelf supports
858 www.hettich.com
HettCAD
Flattened shelf supports
8
ø 5
Drilling diameter 5 mm Can be used in System 32 Load group L 25 (25 kg/m²) Steel, galvanised
Order no. PU
0 020 782 1/500 ea.
Grooved shelf supports
8,5
ø 5
8
8
For grooved bottom panels Pin diameter 5 mm Can be used in System 32 Load group L 25 (25 kg/m²) Zinc die-cast, bright
Order no. PU
0 074 805 1/500 ea.
Shelf studs
12 - 15
8
ø 5
Pin diameter 5 mm Can be used in System 32 Plastic translucent
Order no. PU
0 063 549 1/500 ea.
Shelf supportFlattened shelf supports
859Technik für Möbel
Vari shelf support rail, aluminium, 11 x 6 mm
18
10
7
12,9
5,6
25
3
11 x 6 mmGroove
Standard length: 3500 mm Aluminium Load group L 50 (50 kg/m²)
Article version Finish Order no. PU
Shelf support bright 0 029 249 1/250 ea.
Shelf support gold look 0 029 251 1/250 ea.
Rail bright 0 029 246 30 ea.
Rail gold look 0 029 248 30 ea.
Vari shelf support rail, steel, 10 x 5 mm
6
5
10
1
8,7515
6 x 15 mm1052,5
1
18
9
10
Standard length: 3500 mm Load group L 50 (50 kg/m²) Steel
Article version Finish Order no. PU
Shelf support brass plated 0 013 126 1/250 ea.
Shelf support galvanised 0 013 127 1/250 ea.
Rail brass plated 0 047 611 50 ea.
Rail nickel plated 0 047 612 50 ea.
Vari shelf support rail, steel, 16 x 6 mm
1,5 25,5
11,5
14
9,5
3
8,514
986 x 14 mm
6
16
1,5
Standard length: 3500 mm Load group L 50 (50 kg/m²) Steel
Article version Finish Order no. PU
Shelf support brass plated 0 013 128 1/250 ea.
Shelf support galvanised 0 013 129 1/250 ea.
Rail brass plated 0 047 613 50 ea.
Rail nickel plated 0 047 614 50 ea.
Shelf supportShelf support rails Vari, aluminium, Vari, steel
860 www.hettich.com
HettCAD
Titan 1 with side adjustment
Concealed installation behind the shelf Bolt: 10 mm AF Max. load capacity is 50 kg/m² for shelves measuring 1000 x 300 mm,
100 kg/m² for shelves measuring 1000 x 250 mm and 160 kg/m² for shelves measuring 1000 x 200 mm
Height adjustment: ± 4 mm Side adjustment ± 4 mm Minimum shelf thickness: 24 mm Adjustment of shelf tilt Steel, galvanised
Page reference: For fixing screws (order no. 0 065 480), see page 882
Order no. PU
0 079 713 1/20 ea.
≤ 1000
≤ 300
25 %
50 %
25 %
1290
20
12±4
± 4
SW 10
100
54
≥ 24
≥ 115
ø 5,5 x 50
Titan 1
Concealed installation behind the shelf Bolt: 10 mm AF Max. load capacity is 50 kg/m² for shelves measuring 1000 x 300 mm,
100 kg/m² for shelves measuring 1000 x 250 mm and 160 kg/m² for shelves measuring 1000 x 200 mm
Height adjustment: ± 4 mm Minimum shelf thickness: 24 mm Adjustment of shelf tilt Steel, galvanised
Page reference: For fixing screws (order no. 0 065 480), see page 882
Order no. PU
0 047 661 1/20 ea.
≤ 1000
≤ 300
25 %
50 %
25 %
1280
20
12
± 4
SW 10
100
54
≥ 24
≥ 115
ø 5,5 x 50
Shelf supportTitan 1 with side adjustment
861Technik für Möbel
HettCAD
Titan 2
Concealed installation behind the shelf Bolt: 12 mm ø Max. load capacity is 50 kg/m² for shelves measuring 1000 x 300 mm,
100 kg/m² for shelves measuring 1000 x 250 mm and 160 kg/m² for shelves measuring 1000 x 200 mm
Height adjustment: ± 4 mm Minimum shelf thickness: 24 mm Adjustment of shelf tilt Steel, galvanised
Page reference: For fixing screws (order no. 0 065 480), see page 882
Order no. PU
0 063 598 1/20 ea.
≤ 1000
≤ 300
25 %
50 %
25 %
12,580
20
12
±4
90
54
≥ 24
≥ 105
ø 5,5 x 50
Titan 3
Concealed installation behind the shelf Bolt: 12 mm ø Max. load capacity is 50 kg/m² for shelves measuring 1000 x 300 mm,
100 kg/m² for shelves measuring 1000 x 250 mm and 160 kg/m² for shelves measuring 1000 x 200 mm
Height adjustment: ± 2 mm Minimum shelf thickness: 19 mm Adjustment of shelf tilt Steel, galvanised
Page reference: For fixing screws (order no. 0 065 480), see page 882
Order no. PU
0 079 714 1/20 ea.
12,580
17
12
±2
90
54
≥ 19
≥ 105
ø 5,5 x 50
≤ 1000
≤ 300
25 %
50 %
25 %
Shelf supportTitan 3
862 www.hettich.com
Load capacity of shelf supports
≤ 1000
≤ 300
25 %
50 %
25 %
Max. shelf depth mm
Shelf width 1000 mm
200 160 kg/m² *
250 100 kg/m² *
300 50 kg/m² *
*Load capacity including weight of shelf
Please note:The special purpose screws we supply must be used with wall plugs and are intended for attachment to solid brick, solid sand lime brick, concrete or engineering brick. An 8 mm hole must be drilled into the wall, with the plastic wall plug being knocked in to leave it flush with the surface. Special mounting elements available on the market are required for attachment to other wall materials.
Shelf supportTitan
863Technik für Möbel
Shelf support
Shelf support mount with tilt compensator For concealed installation behind the shelf On walls of corresponding quality and with a maximum distance of
600 mm between supports, as well as shelf dimensions of 1000 x 350 mm, the max. load equals 50 kg/m²
Steel, galvanised The material quality and condition of walls, supports and attachment
are beyond our control. These must be reconciled with the load capacity.
Set comprises: 2 shelf supports
Order no. PU
9 131 119 1 set
≥ 35
15
320140
ø 20
31
310
Pull-out shelf support TT
Shelf support mount for shelves Stainless steel look The material quality and condition of walls, supports and attachment
are beyond our control. These must be reconciled with the load capacity.
Set comprises: 2 pull-out shelf supports
Finish / colour Order no. PU
Stainless steel look 9 131 118 1 set
104
≥ 8≤ 16 kg
≤ 550≤ 320
≤ 750 8 - 50
146
≤ 50≤ 16 kg
≤ 550≤ 320
≤ 750 8 - 50
Shelf supports and pull-out shelf supportsShelf supports, pull-out shelf supports, TT
864 www.hettich.com
Cabinet suspension bracket SAH 130, for pressing in. 3-D adjustment for precision alignment of the cabinet. Sleek, aesthetically pleasing design – for an attractive look down to every last detail.
Cabinet suspension bracket SAH 215 / 216 for use on the back of the rear panel. With precision 3-D adjustment. When mounted on rails, cabinets can be prevented from lifting off.
The SAH 305 cabinet suspension bracket is invisibly recessed into the rear panel.
Making sure cabinets hang securely: cabinet suspension brackets from Hettich. High quality materials, high quality finish. Here too, the Hettich range provides all the options:
For screwing on or pressing in, for fitting inside the cabinet or on the back of the rear panel. All models are easy to fit and adjust.
Cabinet suspension brackets and suspension rails
865Technik für Möbel
Cabinet suspension brackets Range summary / Technical comparison 866 - 867
Cabinet suspension brackets for use behind the rear panel SAH 215 and SAH 216 868 - 871
Cabinet suspension brackets for use inside the carcase SAH 130, SAH 116 and SAH 15 872 - 877
Cabinet suspension brackets for use in the rear panel SAH 305 878
Spacers 879
Suspension rails / Fixing material 880 - 882
Technical information Note on the load capacity of cabinet suspension brackets 882 - 883
Cabinet suspension brackets and suspension railsSummary
866 www.hettich.com
SAH 215
Page 868 - 869
Installation For screwing on On the back of the rear panel
Load capacity 45 kg / ea. according to EN 15939
Suspension bracket Suspension hook Suspension rail, type B
Adjustment rangeHeightDepthLateral for hook suspensionLateral for rail suspension
± 8 mm 25 mm max. ± 3 mm ± 7.5 mm
Rear panel recess 16 mm min. (from rear edge of rear panel)
SAH 216
870 - 871
For screwing on On the back of the rear panel
55 kg / ea. according to EN 15939
Suspension hook Suspension rail, type B
± 8 mm 25 mm max. ± 3 mm ± 7.5 mm
16 mm min. (from rear edge of rear panel)
SAH 130
872 - 873
For pressing in In the carcase
35 kg / ea. according to EN 15939
Suspension hook Suspension rail, type B Suspension rail, type L
± 7 mm 15 mm max. ± 3 mm ± 7 mm
16 mm min. (from front edge of rear panel)
Cabinet suspension bracketsRange summary / Technical comparison
867Technik für Möbel
SAH 15
874 - 875
For screwing on In the carcase
30 kg / ea. according to EN 15939
Suspension hook Suspension rail, type B Suspension rail, type L
- 2 /+ 9 mm - 2/+ 17 mm ± 6 mm ± 7 mm
15 mm min. (from front edge of rear panel)
SAH 116
876 - 877
For screwing on In the carcase
40 kg / ea. according to EN 15939
Suspension hook Suspension rail, type B Suspension rail, type L
± 7 mm 15 mm max. ± 3 mm ± 7 mm
16 mm min. (from front edge of rear panel)
SAH 305
878
For pressing in In the rear panel
15 kg / ea. according to EN 15939
Suspension hook
- - ± 8 mm -
-
Cabinet suspension bracketsRange summary / Technical comparison
868 www.hettich.com
HettCAD
Cabinet suspension bracket SAH 215
For use on the back of the rear panel For rail and hook suspension Load capacity 45 kg / each (to EN 15939/2012) Attached to side panel with 3 side dowels
and screwed down in the rear panel groove Suitable for use with rear panel recess of 16 mm and over Fast, easy height adjustment by means of sturdy
adjustment screw and gear: ± 8 mm Depth adjustment: 25 mm max. Side adjustment: ± 3 mm for hook suspension Adjustment screws are protected from becoming unscrewed
accidentally Lift off height: 7.5 mm
Hook suspension: the shape of the hook prevents the cabinet from slipping off
Suitable for use with B type suspension rail Steel, galvanised - fully recyclable MUST ALWAYS be screwed into the carcase side. Optional "lift off guard" function by means of special screw
Page reference: For SAH 215 cover caps, see page 870
Order no. PU
0 079 716 1/25 pair
SAH 215
Lift off guard
Max. depth adjustment 25 mm
± 9 mm height adjustment by means of gear
For attachment to cabinet sideusing 3.5 x 20 mm chipboard screw
Fitting options
Please note:
Unless attached to top panel, the SAH 215/216 must be mounted within the top third of the carcase. Adjust height before depth.
Cabinet suspension bracketsSAH 215For installation on the back of the rear panel
869Technik für Möbel
≥ 16
32
≥ 56
32
5
12,5
ø 103 - 5
≤ 5
16
!
≤ 25
8+-
37,8
19
50≥ 60
19
ø 15 / 12
2/3
1/332 40
12,5
≥ 16
12,5
≥ 16
M4 x 11
ø 3,5 x 20
≥ 16
Cabinet suspension bracketsSAH 215Installation
870 www.hettich.com
HettCAD
Cabinet suspension bracket SAH 216
For use on the back of the rear panel For rail and hook suspension Load capacity 55 kg/each (to EN 15939/2012) Attached to side panel with 3 side dowels
and screwed down in the rear panel groove Suitable for use with rear panel recess of 16 mm and over Fast, easy height adjustment by means of sturdy
adjustment screw and gear: ± 8 mm Depth adjustment: 25 mm max. Side adjustment: ± 3 mm for hook suspension Adjustment screws are protected from becoming
unscrewed accidentally Lift off height: 7.5 mm
Hook suspension: the shape of the hook prevents the cabinet from slipping off
Suitable for use with B type suspension rail Steel, galvanised - fully recyclable MUST ALWAYS be screwed into the carcase side and in the top panel. Optional "lift off guard" function by means of special screw
Page reference: For SAH 216 cover caps, see below
Order no. PU
0 079 717 1/25 pair
SAH 216 for use on top panelFor attachment to cabinet sideusing 3.5 x 20 mm chipboard screw
For attachment to top panelusing 3.5 x 30 mm chipboard screwLift off guard
Max. depth adjustment 25 mm± 9 mm height adjustment by means of gear
For attachment to cabinet sideusing 3.5 x 20 mm chipboard screw
CautionAt least two screws are required forSAH 216 (fitted diagonally at the bottom and straight or diagonally at the top).
Cover caps for SAH 215 / SAH 216
Plastic
Colour Order no. / Drilling diameter mm
PU
12 15
grey 0 079 722 0 079 723 1/50 ea.
white 0 079 718 0 079 719 1/50 ea.
Cabinet suspension bracketsSAH 216For installation on the back of the rear panel
871Technik für Möbel
3232
5
12,5
ø 103 - 5
16
ø 3,5 x 20
12,5
12,5
ø 3,5 x 20
8
ø 3,5 x 30
8+-
12,5
12,5
!
37,8
19
50≥ 60
19
ø 15 / 12
2/3
1/332 40
M4 x 11
≥ 56
≤ 5
≥ 16
≥ 16
≤ 25
≥ 16
≥ 16
≥ 16
≥ 16
Cabinet suspension bracketsSAH 216Installation
872 www.hettich.com
HettCAD
Cabinet suspension bracket SAH 130
For pressing in For rail and hook suspension Guard to prevent slipping off sideways when suspended from a hook Load capacity 35 kg / each in accordance with EN 15939 in test
rack A (one pair of SAH per carcase; elements without own suspension, such as end shelves, are not permitted)
3-dimensional alignment: height ± 7 mm / max. depth 15 mm / laterally (for hook suspension) ± 3 mm / laterally (for rail suspension) ± 7 mm
Rear panel recess (to front edge of rear panel) at least 16 mm Lift off height 7.5 mm Suitable for use with B type and L type suspension rails Steel, galvanised / white plastic
Depth adjustment distance Order no. PU
SAH 130 T19* 0 079 724 1/25 pair
*Hook's factory setting, measured from housing rear to end of hook
Cover caps for SAH 130
Cover caps for SAH 130 For pushing onto the cabinet suspension bracket Plastic
Colour Order no. PU
mid brown 0 079 727 1/25 pair
silver grey 0 079 726 1/25 pair
white 0 079 725 1/25 pair
Cabinet suspension bracketsSAH 130For installation in carcase
873Technik für Möbel
SAH 130
20,5
3223,7
≥ 16
11,5
ø 10ø 10
3 - 5 ≤ 5
20,5 3216 - 31
11,5
20,5 3216 - 31
11,5
1.
2.
SAH 130
29
18
32 40
✔
±7
≤ 15
≥ 16
≥ 16
Cabinet suspension bracketsSAH 130Installation
874 www.hettich.com
HettCAD
Cabinet suspension bracket SAH 15
For screwing on For rail and hook suspension Guard to prevent slipping off sideways when suspended from a hook Load capacity 30 kg / each in accordance with EN 15939 in test rack
A (one pair of SAH per carcase; elements without own suspension, such as end shelves, are not permitted)
3-dimensional alignment: height -2/+9 mm , depth -2/+18 mm , laterally (for hook suspension) ± 6 mm / laterally (for rail suspension) ± 7 mm
Rear panel recess (to front edge of rear panel) at least 15 mm Lift off height 6 mm Suitable for use with B type and L type suspension rails Steel, galvanised / white plastic
Depth adjustment distance Order no. PU
SAH 15 T16* 9 208 645 1/25 set
*Hook's factory setting, measured from housing rear to end of hook
Cover caps for SAH 15
For pushing onto the cabinet suspension bracket Plastic white / metal nickel plated
Finish / colour Order no. PU
white 9 208 646 1/25 set
nickel plated 9 208 647 1/25 set
Cabinet suspension bracketsSAH 15For installation in carcase
875Technik für Möbel
18 3215 - 34
18 3215 - 34
≥ 18
≥ 18
300 N300 N
T = ≤ 400
H
T < H
EN 15939 (2012)
≥ 18
32 18 14
32 408,5
ø 8
20
383240
R ≤ 7
ø 3,5 x 30
ø 3,5 x 30
- 2+ 9
- 2+ 17
3
≤ 5
Cabinet suspension bracketsSAH 15Installation
876 www.hettich.com
HettCAD
Cabinet suspension bracket SAH 116
For screwing on Rail or hook suspension Guard to prevent slipping off sideways when suspended from a hook Load capacity 40 kg / each in accordance with EN 15939 in test
rack A (one pair of SAH per carcase; elements without own suspension, such as end shelves, are not permitted)
3-dimensional alignment: height ± 7 mm / max. depth 15 mm / laterally (for hook suspension) ± 3 mm / laterally (for rail suspension) ± 7 mm
Rear panel recess (to front edge of rear panel) at least 16 mm Lift off height 7.5 mm Suitable for use with B type and L type suspension rails Steel, nickel plated
Article version Depth adjustment distance Order no. PU
4.6 - 6.5 SAH 116.1 T21 0 019 476 1/25 pair
*Hook's factory setting, measured from housing rear to end of hook
Cabinet suspension bracketsSAH 116For installation in carcase
877Technik für Möbel
ø 4 x 16
30
22
3240
16 - 31 6,532
16 - 31 6,532
X = 6,5
3240
3 - 5
16
SAH 116.1
SAH 116.1 SAH 116.1
SAH 116.1
±7
≥ 16≥ 16
≥ 16 ≥ 16
≤ 5
≤ 15
Cabinet suspension bracketsSAH 116Installation
878 www.hettich.com
HettCAD
Cabinet suspension bracket SAH 305
For pressing into 30 mm ø x 11.5 mm drilling Rear panel at least 16 mm thick Load capacity 15 kg each in accordance with EN 15939 in test rack A
(one pair of SAH per carcase; elements without own suspension, such as end shelves, are not permitted)
Lateral alignment ± 8 mm Suspension with suspension hook ø 6 x 50 mm Zinc die-cast, galvanised
Order no. PU
0 040 669 1/100 ea.
Installing SAH 305
±8ø 30
11,5
Cabinet suspension bracketsSAH 305For installation in rear panel
879Technik für Möbel
HettCAD
Spacers
For depth compensation in the lower section of the rear panel Depth compensation from 15 - 25 mm Self adhesive for easy installation; can be additionally secured by screws Plastic, black
Order no. PU
0 020 784 1/100 ea.
≤ 25 ≥ 15
ø 30
32
42
Cabinet suspension bracketsSpacers
880 www.hettich.com
HettCAD
Suspension rail, type L, snaps off
For SAH 15, SAH 116, SAH 130 cabinet suspension brackets Load capacity 130 kg / cabinet Attachment: - with special screw, ø 5.5 x 50 mm, at the level of
each cabinet suspension bracket - use special fixing screws, see page 882 Snaps off With oblong holes Steel, galvanised
Order no. PU
9 208 678 1/200 ea.
ø 6,51,75
42
130
10
35
8
4,5
15,5
68
Cabinet suspension bracketsSuspension rails
881Technik für Möbel
HettCAD
Universal suspension rail, type B
For SAH 15, SAH 116, SAH 130, SAH 215 / 216 cabinet suspension brackets
Load capacity 150 kg / cabinet Attachment: - with 2 special screws ø 5.5 x 50 mm near each
cabinet suspension bracket - an additional special screw ø 5.5 x 50 must be fitted in
the centre behind each carcase over 900 mm wide - use special fixing screws, see page 882 With oblong holes Steel, galvanised
Advice: Suspension rail without slip off protection; on adjusting the position
of the wall unit it may slip off the suspension rail and fall! Custom lengths on request
Length mm Order no. PU
3000 9 007 651 1/50 ea.
3000
28 6
504,5
6
1,75
17,5
Cabinet suspension bracketsSuspension rails
882 www.hettich.com
Fixing material
Suspension hook ø 6 x 50 mm Must be screwed into the wall plug to a depth of at least 40 mm Suitable hook driver to fit cordless screwdriver, see page 1223 Steel, galvanised
Wall plug, ø 8 x 40 mm For use in solid brick, solid sand lime brick, concrete or engineering brick Commercially available purpose-made fixings
must be used for other wall materials Plastic, white
Set comprises: 100 suspension hooks and 100 wall plugs
Order no. PU
0 046 103 1/100 set
Fixing material
Special screw ø 5.5 x 50 mm For mounting suspension rails For PZ2 screwdriver Steel, galvanised
Wall plug, ø 8 x 40 mm For use in solid brick, solid sand lime brick, concrete or engineering brick Commercially available purpose made fixings
must be used for other wall materials Plastic, white
Set comprises: 100 special screws and 100 wall plugs
Order no. PU
0 065 480 1/100 set
Information on load capacity of cabinet suspension brackets and on accessories
The following basic loading principles must be observed when using cabinet suspension brackets and accessories: Both the furniture design and the quality of the furniture's material
and production are beyond our control. The quality and condition of wall materials are also beyond our
control. The suspension hooks we supply must be used with wall plugs and
are intended for attachment to solid brick, solid sand lime brick, concrete or engineering brick. An 8 mm drilling must be drilled into the wall, with the plastic wall plug being knocked in to leave it flush with the surface. The hook must be screwed into a depth that leaves at least 10 mm of its length projecting from the wall.
Commercial type special mounting elements must be used for attachment to other wall materials.
Dowels and screws must be matched to one another. Ordinary chipboard screws must not be used instead of wall plug screws.
Mounting suspension rails: - with 2 special screws, ø 5.5 x 50 mm, at the level of each cabinet
suspension bracket - above a carcase width of 900 mm, an additional special screw, ø 5.5 x 50 mm, must be fitted at the centre on the back of each carcase (type A, type B and type H). Add on elements, such as end shelves, must not be fitted without
separate cabinet suspension bracket.
Cabinet suspension bracketsFixing material
883Technik für Möbel
Quality that meets all the demands
The quality of Hettich cabinet suspension brackets is monitored con-tinuously. Indication of the load capacity makes it easier to choose the right suspension bracket. The stated load capacity has been checked in accordance with the requirements of EN 15939. All the tests to EN 15939 which are listed below are performed in a defined test frame. The diagrams below are merely intended asillustrations.
Quality criteria Practically oriented load capacities Easy installation of the cabinet suspension bracket Large adjustment ranges for adapting to conditions prevailing on
site Secure adjustment screws Suitable for use in combination with suspension hook and
suspension rail
Impact test
Loading the cabinet with 140% of the permitted load capacity. A steel plate weighing 1.7 kg is toppled over onto the top panel ten times.
Swivel test per door
The hinged door of the loaded cabinet is opened and closed ten times with an additional weight of 30 kg.
Overload test
Loading the cabinet with 200% of the permitted load capacity over 7 days.
Cabinet suspension bracketsInformation on load capacity of cabinet suspension brackets and on accessoriesTechnical information
884 www.hettich.com
Inconspicuous, but indispensable: Buffers prevent the hinged door from closing against the carcase with a loud bang. Buffers let hinged doors close quietly. Whatever the
need, you will always find the right buffer at Hettich. For sticking on, making them easy to fit.
Buffers
885Technik für Möbel
Buffer, self adhesive
ø13
4
Plastic transparent
Diameter mm Total height mm Order no. PU
13 3.5 0 041 841 100 ea.
Buffer, self adhesive
8
ø 16
ø 11
5
Plastic transparent
Diameter mm Total height mm Order no. PU
11 5 0 041 842 100 ea.
16 8 0 041 838 100 ea.
Buffers
886 www.hettich.com