construction – general construction construction … · · 2016-04-19auger torque europe ltd....

We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany2015

SCRAP PROCESSING6

CONSTRUCTION – GENERAL CONSTRUCTION

CONSTRUCTION – QUICK HITCHES & BUCKETS

CONSTRUCTION – TILTROTATORS

CONSTRUCTION – LANDSCAPING & SNOW REMOVAL

CONSTRUCTION – UTILITIES, OIL & GAS

SCRAP PROCESSINGDEMOLITION

MATERIAL HANDLING

RAILWAY

CUSTOM UNITS

1

6

2

3

4

5

7

8

9

10

kinshofer Worldwide

What has now become a worldwide operating company once started in a small garage in the Bavarian uplands. Innovation and quality have made the company what it is today: a global player in the construction industry. Kinshofer can count on a range of subsidiaries and sales offices worldwide to promote its products.

Kinshofer France S.A.R.L. FRANCE

1986

Kinshofer Aponox Oy FINLAND2009

Kinshofer North America CANADA2000

Kinshofer UK UNITED KINGDOM1984

Kinshofer GmbHHeadquarters Marienstein, GERMANY1971

DEMAREC B.V. THE NETHERLANDS

2006

RF-System ABSWEDEN

2011

Darda Kinshofer Construction Machinery Co. Ltd.

PR CHINA2008

Kinshofer USA UNITED STATES OF AMERICA

2013

AUGER TORQUE Europe Ltd.UNITED KINGDOM

2015

A History of Quality and Success For more than 40 years we have specialized in the development and construction

of quality attachments for cranes and excavators. Within the industry, our name has become synonymous for innovation, quality and reliability!

ALWAYS IN MIND – OUR CLIENT‘S NEEDS

THERE IS NO ALTERNATIVE TO QUALITY

KINSHOFER GmbH is one of the leading manufacturers of attachments for loader cranes and hydraulic excavators, as well as for rotators, Tiltrotators and rotary actuators. The headquarters of the medium-sized company is located in the Bavarian village Waakirchen/Marienstein, Germany. Originally named KINSHOFER Maschinenbau Miesbach, the company was founded by Alfred Kinshofer on August 4, 1971 in Miesbach, Bavaria, Germany. At the beginning the small business only produced bridge bearings, handrails and accessories for brick factories, such as tunnel kiln trucks or lifting and lowering devices for tile presses. Two years after the company‘s founding, the development of the first brick stack grapple began. Just one year later, the construction of a pallet fork and a clamshell bucket followed. As the capacities of the original factory had been exhausted, a new plant was built in eastern Miesbach in 1975. Only two years later, this building had grown too small again, so a second building was constructed with additional office buildings. In 1979, the company‘s first rotator with 360° endless rotation was developed. The company changed its name to KINSHOFER Greiftechnik GmbH in 1980, and the first sales activities in the United States and the UK took place. In 1984, the first foreign sales subsidiary of the company was founded in Stockport, Cheshire, England: KINSHOFER UK Ltd. Alfred Kinshofer sold his shares in 1987, but kept being a worthy consultant for the company. The same year, KINSHOFER France was founded in Strasbourg, France. Planning began in 1997 for factories in the Austrian village of Gmünd and the Czech České Velenice, and one year later MARS Greiftechnik was founded and production started.In the year 2000, KINSHOFER made the step overseas and acquired the Canadian company Liftall which was to become the subsidiary KINSHOFER North America. A major milestone for KINSHOFER occurred in 2003: the development of the patented HPXdrive that bestowed the if-Silver Award for ”Product Design“ in the ”Industry“ branch upon the company. In 2006, the company finally got its current name: KINSHOFER GmbH. The same year, the Dutch specialist for demolition and recycling tools Demarec B.V. was acquired.The worldwide operating Swedish company Lifco AB acquired KINSHOFER GmbH in 2007. Another logical consequence was the expansion to the east, and so the company Darda KINSHOFER Construction Machinery Co. Ltd. was founded in 2008 in the Chinese capital of Beijing. The same year marks the foundation of KINSHOFER Aponox Oy in Hämeenlinna, Finland with the main focus on NOX Tiltrotators. As the year 2011 came to an end, KINSHOFER acquired the Swedish company RF-System AB, as well as the intellectual property and distribution rights of New Zealand‘s Wedgelock Equipment Ltd. at the beginning of 2012, further broadening the available product range. In 2013, the new KINSHOFER US factory opened in Sanborn in the state of New York.KINSHOFER and the UK based company Auger Torque Europe Limited announced on February 3rd 2015 that they have signed a definite agreement to merge. Under the terms of the agreement KINSHOFER has acquired 100% of the shares of Auger Torque Europe Ltd. and Auger Torque Australia Pty Ltd.. Auger Torque is a manufacturer of earth drills, augers, trenchers and other high quality attachments for excavators, skidsteers, backhoes, telehandlers, tractors, truck cranes & more.

KINSHOFER counts on a high vertical integration. The products are designed in the proper development department, constructed and finally tested in the in-house test laboratory. Thus the company retains control not only over the production, but also the product itself. Constant communication and information exchange between the company and its clients results in further developments and innovations that keep the company close to the customer.In the Action Park at the company‘s headquarters, there is also the possibility for dealers and clients to take part in training and tool demonstrations. Always close to the client – up front, everywhere ...

Primary Demolition Secondary Demolition Steel

Landscaping / Snow Removal Road Construction Civil Engineering Utilities

Scrap Metal Scrap Tires Scrap Rails

Within the range of attachments for construction, you can find different and versatile tools made by KINSHOFER for tasks from landscaping to road construction. Buckets and Clamshell buckets for different ope-rating weights and in different widths, suitable adapters and quick hitches are part of the product range as well as smaller demolition and sorting grabs, multi purpose grabs, rock grabs, augers and brushes for dirt and snow removal. Innovations not missed are the unique cylinderless nox Tiltrotator, the revolutionary HPXdrive – no hoses, no hydraulic cylinders, easy shell ex-change and absolutely maintenance-free – or the C-VE series with its fast shell exchange system!

No matter if demolishing, breaking, comminuting or separating – with attachments for demolition and recycling you will always have the perfect tool.With attachments for a broad scope of machines, reaching from demolition grabs for lighter weight excavators up to dedicated shears for excavators of up to 80t operating weight – the perfect soluti-on for each weight and task is available.Innovations do not fall short: the MQP with its strong power thanks to the - cylinder, or the , making the exchange of jaws possible within only a few minutes on site!

Scrap processing has become an increasingly important concern throughout the world. Scrap metal has to be cut, broken, handled, separated, processed and recycled, similar to plastic, glass, and tires.Rail scrap processing is just one important part of the large scrap industry.At KINSHOFER you will find the perfect tool for your task, no matter if you want to cut beams, rails, tires, containers, tanks or entire ships! Entrust KINSHOFER with your scrap processing task – we will find the perfect solution for you!

Many Applications - One Solution: kinshoferOver 40 years of experience as well as involvement with en d users in the development process, combined

with the latest engineering tools, have led to KINSHOFER‘s comprehensive product range.

Many Applications - One Solution: kinshoferOver 40 years of experience as well as involvement with en d users in the development process, combined

with the latest engineering tools, have led to KINSHOFER‘s comprehensive product range.

Construction Off-Shore Nuclear Pipeline / Geothermal

Waste Bulk Material & Dry Cargo Timber

Rail Track Construction Rail Track Maintenance Scrap Rails

It makes no difference whether you are loading or discharging boat or train carriages, handling scrap or wood or performing demolition tasks – within the KINSHOFER range »Material Handling« you are sure to find the optimal tool. Excavators from 11t to 80t operating weight can be equipped. Orange peel grabs with different capacities and designs are part of the available tools as well as demolition and sorting grabs, re-handling clamshell buckets or timber grabs. Outstanding: the extraordinary C80H re-hand-ling clamshell bucket with the incredible volume of 5000 litres!

As the tasks to be accomplished are becoming more and more complex, the requirements to be met increase accordingly. Many times, no standard tool can meet to solve clients‘ demands and thus, only a custom-made product can solve the problem. Our existing products for custom and special solutions range from tools for off-shore operations, nuclear tasks to geothermal appli-cations. You have a certain problem on hand requiring a special solution? KINSHOFER will find the perfect answer for you and your task!

There is hardly another invention that has changed the transport system as much as the railway. Railroads have, and continue, to play a large role in the way people and products are transported around the world. It is vital that railways are kept operational and safe.No matter if it is about the construction, maintenance or demolition of railroad tracks: the KINSHOFER range meets every demand, ranging from sleeper layers and ballast tampers to large mobile rail cutters. Find everything you need and more in one single company!

6We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany

The scrap industry is currently one of the most important industries after all. Each year, more than 500 million tons of scrap have to processed and loaded worldwide. A major part of this is formed by recycled scrap. No matter if you would like to break, separate, sort or handle and load the scrap, KINSHOFER provides the ideal tool for your task. Even the breaking of rails, cable looms or large tires is no problem at all and can be realized in a fast and economic way. The KINSHOFER Orange Peel Grabs can handle even the smallest mixed scrap up to large, bulky items.

Scrap Processing ...... includes the separation, sorting and

breaking, as well as the loading and recycling of scrap. No matter the task, KINSHOFER provides the perfect tool.

The DRS Mobile Shear is the ideal tool to break industrial and mixed scrap

No matter if bulky or small mixed scrap: The P-Grab Series can handle everything

The RC 30 Mobile Rail Cutter breaks rails without any problems

Thanks to the exchangeable jaws a versatile tool: The MQP Multi-Quick Processor, here with steel jaws mounted

Breaks rails non-stop: the RC 30Mobile Rail Cutter

Even cutting large tires is

not more than a breeze for

the DRS-Series

The ideal partner on every scrap yard: The DRS Mobile Shear

Ideal for handling bulky scrap: The P51VHD Orange Peel Grab

The optimum help to clean the scrap yard from small scrap pieces: The SKS Bucket Sweeper


Contents

Cata

log

effec

tive

Janu

ary

2015

—> Further information about KINSHOFER products can be found on our web site www.kinshofer.com

Summary Listed by Operating Weight of Excavator 8

PremiumLine 8

Orange Peel Grabs

for excavators with up to 22t / 48400 lbs operating weight with vertical cylinders: P22V-450-4/-5 10

for excavators with up to 25t / 55000 lbs operating weight with vertical cylinders: P25VR HD-600-3 11

for excavators with up to 25t / 55000 lbs operating weight with vertical cylinders: P25VR HD-800-3/-4 11

for excavators with up to 30t / 66000 lbs operating weight with vertical cylinders, Heavy Duty: P30VHD-600-4/-5 12

for excavators with up to 30t / 66000 lbs operating weight with vertical cylinders, Heavy Duty: P30VHD-800-5 12
















Multi-Quick Processors for Demolition, Cutting & Separating with DemaPower 17

for excavators with up to 25t / 55000 lbs operating weight: MQP-25 with DemaPower, five optional jaws 18

for excavators with up to 35t / 77000 lbs operating weight: MQP-30 with DemaPower, six optional jaws 18



Mobile Shears

for excavators with up to 30t / 66000 lbs operating weight, Mobile Shear with 360° Rotation: DRS-25-A 19




for excavators with up to 45t / 99000 lbs operating weight, Mobile Shear with 360° Rotation: DRS-60-B 19



for excavators with up to 50t / 110000 lbs operating weight, Mobile Shear with 360° Rotation: DRS-75-C 19



for excavators with up to 70t / 154000 lbs operating weight, Mobile Shear with 360° Rotation: DRS-90-C 19

Mobile Rail Cutter

for excavators with up to 35t / 77000 lbs operating weight: Mobile Rail Cutter RC 30 21

Brushes, Sweepers and Brooms

for excavators and loaders: Sweeper Roller SKB / ROB Rotor Brush 22

for excavators and loaders: Ballast Brush SKB-Ballast 23

for excavators, tractors and loaders: Broom BST / BST RT 24

for excavators with up to 24t / 52800 lbs operating weight: Bucket Sweeper SKS 25

Others

for excavators with 2t / 4400 lbs to 25t / 55000 lbs operating weight: Brush Cutter SLA 26


Multi-Quick Processors page

MQP-25 Multi-Quick Processor complete package with rotation and bolt-on adapter

18


18


18

Summary Listed by Operating Weight of ExcavatorType Operating Weight of Excavator (t/lbs)Orange Peel Grabs

16 ... 20 ... 22 ... 26 ... 30 ... 35 36 ... 40 ... 49 50 ... 80 ... 100P22V 35200 ... 44000 ... 48400P25VR HD ... 44000 ... 48400 ...P30VHD 44000 ... 48400 ... 57200 ... 66000P40VHD 57200 ... 66000 ... 77000 79200 ... 88000P51VHD 79200 ... 88000 ... 107800 110000P100VHD 110000 ... 176000 ... 220000

Multi-Quick Processors18 ... 22 ... 25 ... 32 ... 35 ... 45 46 ... 48 ... 50 51 ... 58 ... 65

MQP-25 39600 ... 48400 ... 55000MQP-30 48400 ... 55000 ... 70400 ... 77000MQP-45 70400 ... 77000 ... 99000 101200 ... 105600 ... 110000MQP-60 99000 101200 ... 105600 ... 110000 112200 ... 127600 ... 143000

Mobile Shears14 ... 18 ... 25 ... 30 ... 35 40 45 50 ... 60 ... 65 70 75 80 100

DRS-25-A 30800 ... 39600 ... 55000 ... 66000DRS-30-A 39600 ... 55000 ... 66000 ... 77000DRS-45-A 55000 ... 66000 ... 77000 88000 99000 110000DRS-60-A 66000 ... 77000 88000 99000 110000 ... 132000 ... 143000DRS-60-B 66000 ... 77000 88000DRS-75-A 77000 88000 99000 110000 ... 132000 ... 143000 154000 165000 176000DRS-75-B 77000 88000 99000 110000 ... 132000DRS-75-C 66000 ... 77000 88000 99000 110000DRS-90-A 99000 110000 ... 132000 ... 143000 154000 165000 176000 220000DRS-90-B 88000 99000 110000 ... 132000 ... 143000 154000 165000DRS-90-CMobile Rail Cutter

14 ... 18 ... 22 ... 24 ... 26 ... 35 50 ... 60 ... 65 70 75 80 100RC 30 48400 ... 52800 ... 57200 ... 77000

Brushes3 4 5 6 7 10 12 14 16 18 20 21 22 23 24 25

SKS 0904 6600 8800 11000 13200SKS 1104 6600 8800 11000 13200SKS 1106 15400 22000 26400SKS 1225 22000 26400 30800SKS 1375 26400 30800 35200SKS 1685 30800 35200 39600SKS 1856 39600 44000 46200 48400SKS 2356 39600 44000 46200 48400SKS 2506 44000 46200 48400 50600 52800

Brush Cutter2 3 4 5 6 7 9 11 13 14 15 16 18 22 24 25

SLA 2 4400 6600 8800SLA 4 6600 8800 11000SLA 6 6600 8800 11000 13200SLA 12 15400 19800 24200SLA 14 19800 24200 28600SLA 20 30800 33000 35200 39600 48400 52800 55000

Legend:

vertical cylinder (V = vertical)

DemaPower

other


Orange Peel Grabs page

P22V-450-5-H Orange peel grab complete package with rotator, head plate and non-return valve

10

P30VHD-600-5-H Orange peel grab heavy duty complete package with rotation, head plate, hose guard, bottom plate with welded eye and non-return valve

12


14


15

Top Products now with Shorter Delivery Time

Ready-to-Mount and Optimally Adapted Complete Packages

Professional Tools for Professional UsersGUA

RANTEE

D Top Products now with Shorter Delivery Time

Ready-to-Mount and Optimally Adapted Complete Packages

Professional Tools for Professional Users

Mobile Shears page

DRS-30-A Mobile shear complete package with rotation and bolt-on adapter

19


19


19


19


P22V

15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t … 25 t … 27 t … 35 t … 40 t 50 t 60 t 70 t

Orange Peel Grabs with 4/5 TinesOrange peel grab with 4 tines or 5 tines for the handling of bulky scrap with excavators from 16t / 35200 lbs to 22t / 48400 lbs operating weight.l 4 tines version available with pointed tines.l With 5 tines available in 4 different tine profiles: - F: fully closing tines - H: half closing tines - W: wide style of pointed tines - T: pointed tines.l Hydraulic cylinders are fitted with replaceable piston rod protection and are hydraulically cushioned.l Oil distribution and hydraulic hoses are protected in the centre section.l Shell bearings with high resistant steel bushings and hardened, ground pins. l Shell tips made of 500 HB cutting edge material, exchangeable individually as wear parts. l Closing force 17 kN / 3740 lbf at an Operating pressure of 35 MPa / 5040 psi.l Tines are made out of 400 HB steel.

Requirements of Excavator

Operating pressure (open/close): max. 35 MPa (350 bar) / 5040 psiRecommended oil flow (open/close): 50 - max. 150 l/min / 13.21 - max. 39.63 GPMOperating pressure (rotation): max. 32 MPa (320 bar) / 4608 psiRecommended oil flow (rotation): 20 - max. 50 l/min / 5.28 - max.13.21 GPM

Technical Drawings

Orange Peel Grab P22V

Type Width E Opening A Height C max. Height C min. Volume Number of tines

Self weight Load capacity(closed) (closed) (closed)(mm/in) (mm/in) (mm/in) (mm/in) (litre/c.y.) (kg/lbs) (kg/lbs)

P22V-450-4-T 1370 / 53.94 1910 / 75.20 1550 / 61.02 1240 / 48.82 450 / 0.59 4 810 / 1782 7000 / 15400P22V-450-5-F 1370 / 53.94 1910 / 75.20 1550 / 61.02 1240 / 48.82 450 / 0.59 5 1145 / 2519 7000 / 15400P22V-450-5-H 1370 / 53.94 1910 / 75.20 1550 / 61.02 1240 / 48.82 450 / 0.59 5 1035 / 2277 7000 / 15400P22V-450-5-W 1370 / 53.94 1910 / 75.20 1550 / 61.02 1240 / 48.82 450 / 0.59 5 970 / 2134 7000 / 15400P22V-450-5-T 1370 / 53.94 1910 / 75.20 1550 / 61.02 1240 / 48.82 450 / 0.59 5 950 / 2090 7000 / 15400

Package consists of: orange peel grab, KINSHOFER rotator, head plate and non-return valve

KINSHOFER RotatorContinuous rotation and two oil passages. Overload protection is ensured by pressure relief valves.

Typ Upper connection Torque Moment of deflection(width x pin-Ø) max.

(mm/in) (Nm/ft.lbs) (Nm/ft.lbs)KM 10 F275-60 125 x 60 / 4.92 x 2.36 2000 / 1475 14000 / 10325

Accessories

Type Description

KM 501 13t-25t upper suspension without pendulum damperKM 511 13t-25t upper suspension with pendulum damperSW10 cardanic adapter for Lehnhoff grab exchange system SW/MS10 without suspension – up to 19t / 41800 lbsSW21 cardanic adapter for Lehnhoff grab exchange system SW/MS21 without suspension – up to 28t / 61600 lbs

H: Half Closing Tines

W: Wide Tines

F: Fully Closing Tines

T: Small Tines

E

A

C m

axC m

in


11

15 t 18 t 20 t … 25 t 26 t … 30 t … 35 t … 40 t 50 t 60 t 70 t

P25VR HD

C m

in

A

C m

ax

E P25VR HD-600-3-W

P25VR HD-800-4-W

Orange Peel Grabs P25VR HD

Type Width E Opening Height Volume Number Weight Load (closed) A C max. of tines capacity(mm/in) (mm/in) (mm/in) (litre/c.y.) (kg/lbs) (kg/lbs)

P25VR HD-600-3-W* 1420 / 55.91 2200 / 86.61 2115 / 83.27 600 / 0.78 3 1600 / 3520 3000 / 6600P25VR HD-800-3-W* 1560 / 61.42 2200 / 86.61 2115 / 83.27 800 / 1.05 3 1490 / 3278 3000 / 6600P25VR HD-800-4-W* 1550 / 61.02 2250 / 88.58 2120 / 83.46 800 / 1.05 4 1980 / 4356 3000 / 6600* prices without upper adapterPackage consists of: orange peel grab, integrated rotation with sturdy slewing ring, head plate, hose guard, non-return valve and

bolt-on bottom plate with welded lifting eye

Accessories

Type Description

KM 691 15t adapter connection plate for specific solutions – up to 15t / 33000 lbsKM 691 20t adapter connection plate for specific solutions – up to 20t / 44000 lbsKM 691 27t adapter connection plate for specific solutions – up to 27t / 59400 lbsKM 690 15t adapter for rigid mounting – up to 15t / 33000 lbsKM 690 20t adapter for rigid mounting – up to 20t / 44000 lbs KM 690 27t adapter for rigid mounting – up to 27t / 59400 lbsOQ60 bolt-on-adapter for Oilquick OQ60 – 12t to 18t / 26400 lbs to 39600 lbsOQ65 bolt-on-adapter for Oilquick OQ65 – 14t to 22t / 30800 lbs to 48400 lbsOQ70 bolt-on-adapter for Oilquick OQ70 – 15t to 28t / 33000 lbs to 61600 lbsOQ70/55 bolt-on-adapter for Oilquick OQ70/55 – 18t to 28t / 39600 lbs to 61600 lbsSW10 rigid bolt-on-adapter for Lehnhoff grab exchange system SW/MS10 for rigid mounting – up to 19t / 41800 lbsSW21 rigid bolt-on-adapter for Lehnhoff grab exchange system SW/MS21 for rigid mounting – up to 28t / 61600 lbs

adapter for quick exchange systems from other manufacturers available

Orange Peel Grabs with 3/4 TinesOrange peel grab with 3 tines and 600 l / 0.78 c.y. or 3 or 4 tines and 800 l / 1.05 c.y. volume for the handling of bulky scrap with excavators from 18t / 39600 lbs to 25t / 55000 lbs operating weight. Especially developed for heavy duty tasks.l Available in two different volumes and diverse tine profiles (see technical drawings below). l Hydraulic cylinders are fitted with replaceable piston rod protection and are hydraulically cushioned.l Oil distributor with integrated non-return valve mounted directly underneath the rotator.l Oil distribution and hydraulic hoses are protected in the carrier.l Greasing points are easily accessible.l Reinforced tines made of wear-resistant steel HB 400.l Weld-on tips made of high resistant forged and tempered steel HB 500. l High closing force 38 kN / 8360 lbf at an Operating pressure of 35 MPa / 5040 psi.l Accurate fittings eliminate tine distorsion, solid end stops (open & close).l Reinforced bolts, large bearing surface for bolts, specially coated solid steel bushings.l Robust, fully integrated rotation with sturdy slewing ring with internal hoses guarantees optimum force transmission and prevents hose break. The integrated pressure relief valve protects against overcharge. l Swivel and bevel sealed. Rotary feedthrough and motor accessible directly.

Requirements of ExcavatorP25VR HD-3-W P25VR HD-4-W

Operating pressure (open/close): max. 35 MPa (350 bar) max. 35 MPa (350 bar)Recommended oil flow (open/close): 120 - max. 200 l/min 50 - max. 200 l/minHydraulic connection (Open/Close): 1“ 1“Operating pressure (rotation): 17 MPa (170 bar) 17 MPa (170 bar)Recommended oil flow (rotation): 25 - max. 60 l/min 40 - max. 60 l/minHydraulic connection (Rotation): 1/2“ 1/2“

Technical Drawings


P30VHD Orange Peel Grabs Heavy Duty with 4/5 Tines

15 t … 20 t … 25 t 26 t … 30 t … 35 t … 40 t 50 t 60 t 70 t

Requirements of ExcavatorOperating pressure (open/close): max. 35 MPa (350 bar) / 5040 psiRecommended oil flow (open/close): 120 - max. 200 l/min / 31.70 - max. 52.84 GPMHydraulic connection (Open/Close): 1“Operating pressure (rotation): max. 17 MPa (170 bar) / 2448 psiRecommended oil flow (rotation): 25 - max. 60 l/min / 6.61 - max. 15.85 GPMHydraulic connection (Rotation): 1/2“Technical Drawings

Orange peel grab with 4 or 5 tines and 600 l / 0.78 c.y. or 800 l / 1.05 c.y. volume for the handling of bulky scrap with excavators from 20t / 44000 lbs to 30t / 66000 lbs operating weight - for heavy duty tasks.l Available in two different volumes and diverse tine profiles (see technical drawings below). l Hydraulic cylinders are fitted with replaceable piston rod protection and are hydraulically cushioned.l Oil distributor with integrated non-return valve mounted directly underneath the rotator.l Oil distribution and hydraulic hoses are protected in the carrier.l Greasing points are easily accessible.l Reinforced tines made of wear-resistant steel HB 400.l Weld-on tips made of high resistant forged and tempered steel HB 500. l High closing force 27 kN / 5940 lbf at an Operating pressure of 35 MPa / 5040 psi.l Accurate fittings eliminate tine distorsion, solid end stops (open & close).l Reinforced bolts, large bearing surface for bolts, specially coated solid steel bushings.l Robust, fully integrated rotation with sturdy slewing ring with internal hoses guarantees optimum force transmission and prevents hose break. The integrated pressure relief valve protects against overcharge. l Swivel and bevel sealed. Rotary feedthrough and motor accessible directly.

Orange Peel Grabs P30VHD Heavy Duty

Type Width E Opening Height C max. Volume Number Weight Load (closed) A (closed) of tines capacity(mm/in) (mm/in) (mm/in) (litre/c.y.) (kg/lbs) (kg/lbs)

P30VHD-600-4-F 1520 / 59.84 2130 / 83.86 1980 / 77.95 600 / 0.78 4 1600 / 3520 7000 / 15400P30VHD-600-4-H 1520 / 59.84 2130 / 83.86 1980 / 77.95 600 / 0.78 4 1490 / 3278 7000 / 15400P30VHD-600-4-W 1520 / 59.84 2130 / 83.86 1980 / 77.95 600 / 0.78 4 1385 / 3047 7000 / 15400P30VHD-600-4-T 1520 / 59.84 2130 / 83.86 1980 / 77.95 600 / 0.78 4 1360 / 2992 7000 / 15400P30VHD-600-5-F 1520 / 59.84 2130 / 83.86 1980 / 77.95 600 / 0.78 5 1770 / 3894 7000 / 15400P30VHD-600-5-H 1520 / 59.84 2130 / 83.86 1980 / 77.95 600 / 0.78 5 1670 / 3674 7000 / 15400P30VHD-600-5-W 1520 / 59.84 2130 / 83.86 1980 / 77.95 600 / 0.78 5 1595 / 3509 7000 / 15400P30VHD-600-5-T 1520 / 59.84 2130 / 83.86 1980 / 77.95 600 / 0.78 5 1570 / 3454 7000 / 15400P30VHD-800-5-F 1525 / 60.04 2290 / 90.16 2065 / 81.30 800 / 1.05 5 1750 / 3850 7000 / 15400P30VHD-800-5-H 1525 / 60.04 2290 / 90.16 2065 / 81.30 800 / 1.05 5 1690 / 3718 7000 / 15400P30VHD-800-5-W 1525 / 60.04 2290 / 90.16 2065 / 81.30 800 / 1.05 5 1560 / 3432 7000 / 15400P30VHD-800-5-T 1525 / 60.04 2290 / 90.16 2065 / 81.30 800 / 1.05 5 1540 / 3388 7000 / 15400

Package consists of: orange peel grab, integrated rotation with sturdy slewing ring, head plate, hose guard, non-return valve and bolt-on bottom plate with welded lifting eye

Accessories

Type Description

KM 501 19t-60t upper suspension without pendulum damperSW25 cardanic adapter for Lehnhoff grab exchange system SW/MS25 without suspension – up to 40t / 88000 lbs



W: Wide Tines


T: Small Tines

EA

C m

ax


P40VHDOrange Peel Grabs Heavy Duty with 3 Tines

15 t … 20 t … 25 t 26 t … 30 t … 35 t … 40 t 50 t 60 t 70 t


Type Width E Opening Height C max. Volume Number Weight Load (closed) A (closed) of tines capacity(mm/in) (mm/in) (mm/in) (litre/c.y.) (kg/lbs) (kg/lbs)

P40VHD-600-3-W 1420 / 55.91 2200 / 86.61 2170 / 85.43 600 / 0.78 3 1390 / 3058 6000 / 13200P40VHD-800-3-W 1585 / 62.40 2200 / 86.61 2170 / 85.43 800 / 1.05 3 1430 / 3146 6000 / 13200P40VHD-1000-3-W 1630 / 64.17 2440 / 96.06 2300 / 90.55 1000 / 1.31 3 1585 / 3487 6000 / 13200P40VHD-1250-3-W 1830 / 72.05 2660 / 104.72 2415 / 95.08 1250 / 1.64 3 1660 / 3652 6000 / 13200P40VHD-1500-3-W 1860 / 73.23 2835 / 111.61 2510 / 98.82 1500 / 1.96 3 2045 / 4499 6000 / 13200


Accessories

Type Description




Operating pressure (open/close): max. 35 MPa (350 bar) / 5040 psiRecommended oil flow (open/close): 120 - max. 200 l/min / 31.70 - max. 52.84 GPMHydraulic connection (Open/Close): 1“Operating pressure (rotation): max. 17 MPa (170 bar) / 2448 psiRecommended oil flow (rotation): 25 - max. 60 l/min / 6.61 - max. 15.85 GPMHydraulic connection (Rotation): 1/2“

Technical Drawings

E

A

C m

in

C m

ax

Orange peel grab with 3 tines and 600 l / 0.78 c.y., 800 l / 1.05 c.y., 1000 l / 1.31 c.y., 1250 l / 1.64 c.y. or 1500 l / 1.96 c.y. volume for the handling of bulky scrap with excavators from 26t / 57200 lbs to 40t / 88000 lbs operating weight - for heavy duty tasks.l Available in two different volumes and diverse tine profiles (see technical drawings below). l Hydraulic cylinders are fitted with replaceable piston rod protection and are hydraulically cushioned.l Oil distributor with integrated non-return valve mounted directly underneath the rotator.l Oil distribution and hydraulic hoses are protected in the carrier.l Greasing points are easily accessible.l Reinforced tines made of wear-resistant steel HB 400.l Weld-on tips made of high resistant forged and tempered steel HB 500. l High closing force 38 kN / 8360 lbf at an Operating pressure of 35 MPa / 5040 psi.l Accurate fittings eliminate tine distorsion, solid end stops (open & close).l Reinforced bolts, large bearing surface for bolts, specially coated solid steel bushings.l Robust, fully integrated rotation with sturdy slewing ring with internal hoses guarantees optimum force transmission and prevents hose break. The integrated pressure relief valve protects against overcharge. l Swivel and bevel sealed. Rotary feedthrough and motor accessible directly.


P40VHD Orange Peel Grabs Heavy Duty with 4/5 Tines

15 t … 20 t … 25 t 26 t … 30 t … 35 t … 40 t 50 t 60 t 70 t

Orange peel grab with 4 or 5 tines and 600 l / 0.78 c.y. or 800 l / 1.05 c.y. volume for the handling of bulky scrap with excavators from 26t / 57200 lbs to 40t / 88000 lbs operating weight - for heavy duty tasks.l Available in two different volumes and diverse tine profiles (see technical drawings below). l Hydraulic cylinders are fitted with replaceable piston rod protection and are hydraulically cushioned.l Oil distributor with integrated non-return valve mounted directly underneath the rotator.l Oil distribution and hydraulic hoses are protected in the carrier.l Greasing points are easily accessible.l Reinforced tines made of wear-resistant steel HB 400.l Weld-on tips made of high resistant forged and tempered steel HB 500. l High closing force 38 kN / 8360 lbf at an Operating pressure of 35 MPa / 5040 psi.l Accurate fittings eliminate tine distorsion, solid end stops (open & close).l Reinforced bolts, large bearing surface for bolts, specially coated solid steel bushings.l Robust, fully integrated rotation with sturdy slewing ring with internal hoses guarantees optimum force transmission and prevents hose break. The integrated pressure relief valve protects against overcharge. l Swivel and bevel sealed. Rotary feedthrough and motor accessible directly.


Type Width E Opening Height Volume Number Weight Load (closed) A C max. of tines capacity(mm/in) (mm/in) (mm/in) (litre/c.y.) (kg/lbs) (kg/lbs)

P40VHD-600-5-H 1430 / 56.30 2200 / 86.61 2170 / 85.43 600 / 0.78 5 1830 / 4026 10000 / 22000P40VHD-600-5-W 1430 / 56.30 2200 / 86.61 2170 / 85.43 600 / 0.78 5 1780 / 3916 10000 / 22000P40VHD-600-5-T 1430 / 56.30 2200 / 86.61 2170 / 85.43 600 / 0.78 5 1700 / 3740 10000 / 22000P40VHD-800-4-W 1570 / 61.81 2200 / 86.61 2170 / 85.43 800 / 1.05 4 1670 / 3674 10000 / 22000P40VHD-800-4-T 1570 / 61.81 2200 / 86.61 2170 / 85.43 800 / 1.05 4 1550 / 3410 10000 / 22000P40VHD-800-5-F 1570 / 61.81 2200 / 86.61 2170 / 85.43 800 / 1.05 5 2075 / 4565 10000 / 22000P40VHD-800-5-H 1570 / 61.81 2200 / 86.61 2170 / 85.43 800 / 1.05 5 1860 / 4092 10000 / 22000P40VHD-800-5-W 1570 / 61.81 2200 / 86.61 2170 / 85.43 800 / 1.05 5 1775 / 3905 10000 / 22000P40VHD-800-5-T 1570 / 61.81 2200 / 86.61 2170 / 85.43 800 / 1.05 5 1740 / 3828 10000 / 22000


Accessories

Type Description





W: Wide Tines


T: Small Tines

E

A

C m

ax


P51VHDOrange Peel Grabs Heavy Duty with 4/5 Tines


Type Width E Opening Height Volume Number Weight Load (closed) A C max. of tines capacity(mm/in) (mm/in) (mm/in) (litre/c.y.) (kg) (kg)

P51VHD-1000-4-W 1630 / 64.17 2440 / 96.06 2200 / 86.61 1000 / 1.31 4 1620 / 3564 10000 / 22000P51VHD-1000-4-T 1630 / 64.17 2440 / 96.06 2200 / 86.61 1000 / 1.31 4 1595 / 3509 10000 / 22000P51VHD-1000-5-F 1630 / 64.17 2440 / 96.06 2200 / 86.61 1000 / 1.31 5 2165 / 4763 10000 / 22000P51VHD-1000-5-H 1630 / 64.17 2440 / 96.06 2200 / 86.61 1000 / 1.31 5 2000 / 4400 10000 / 22000P51VHD-1000-5-W 1630 / 64.17 2440 / 96.06 2200 / 86.61 1000 / 1.31 5 1930 / 4246 10000 / 22000P51VHD-1000-5-T 1630 / 64.17 2440 / 96.06 2200 / 86.61 1000 / 1.31 5 1890 / 4158 10000 / 22000P51VHD-1250-5-H 1835 / 72.24 2665 / 104.92 2415 / 95.08 1250 / 1.64 5 2200 / 4840 10000 / 22000P51VHD-1250-5-W 1835 / 72.24 2665 / 104.92 2415 / 95.08 1250 / 1.64 5 2130 / 4686 10000 / 22000P51VHD-1500-4-H 1870 / 73.62 2840 / 111.81 2500 / 98.43 1500 / 1.96 4 2000 / 4400 10000 / 22000P51VHD-1500-4-W 1870 / 73.62 2840 / 111.81 2500 / 98.43 1500 / 1.96 4 1850 / 4070 10000 / 22000P51VHD-1500-5-F 1870 / 73.62 2840 / 111.81 2500 / 98.43 1500 / 1.96 5 2320 / 5104 10000 / 22000P51VHD-1500-5-H 1870 / 73.62 2840 / 111.81 2500 / 98.43 1500 / 1.96 5 2155 / 4741 10000 / 22000P51VHD-1500-5-W 1870 / 73.62 2840 / 111.81 2500 / 98.43 1500 / 1.96 5 2085 / 4528 10000 / 22000P51VHD-1500-5-T 1870 / 73.62 2840 / 111.81 2500 / 98.43 1500 / 1.96 5 2045 / 4499 10000 / 22000

Package consists of: orange peel grab, integrated rotation with sturdy slewing ring, head plate, hose guard, non-return valve andbolt-on bottom plate with welded lifting eye

Accessories

Type Description

KM 501 19t-60t upper suspension without pendulum damperSW40 cardanic adapter for Lehnhoff grab exchange system SW/HS40 without suspension – up to 70t / 154000 lbs


15 t … 20 t … 25 t … 30 t … 35 t 36 t … 40 t 50 t 60 t 70 t

Orange peel grab with 4 or 5 tines and 1000 l / 1.31 c.y. , 1250 l / 1.64 c.y. or 1500 l / 1.96 c.y. volume for the handling of bulky scrap with excavators from 36t / 79200 lbs to 50t / 110000 lbs operating weight - for heavy duty tasks.l Available in two different volumes and diverse tine profiles (see technical drawings below). l Hydraulic cylinders are fitted with replaceable piston rod protection and are hydraulically cushioned.l Oil distributor with integrated non-return valve mounted directly underneath the rotator.l Oil distribution and hydraulic hoses are protected in the carrier.l Greasing points are easily accessible.l Reinforced tines made of wear-resistant steel HB 400.l Weld-on tips made of high resistant forged and tempered steel HB 500. l High closing force 33 kN / 7260 lbf at an Operating pressure of 35 MPa / 5040 psi.l Accurate fittings eliminate tine distorsion, solid end stops (open & close).l Reinforced bolts, large bearing surface for bolts, specially coated solid steel bushings.l Robust, fully integrated rotation with sturdy slewing ring with internal hoses guarantees optimum force transmission and prevents hose break. The integrated pressure relief valve protects against overcharge. l Swivel and bevel sealed. Rotary feedthrough and motor accessible directly.



W: Wide Tines


T: Small Tines

E

A

C m

ax


E

C m

ax

A

P100VHD Orange Peel Grabs Heavy Duty with 4 or 5 Tines

Orange Peel Grabs P100VHD Heavy DutyType Width E Opening Height Volume Number Weight Load

(closed) A C max. of tines capacity(mm/in) (mm/in) (mm/in) (litre/c.y.) (kg) (kg)

P100VHD-1500-5-H 1500 / 1.96 5 10000 / 22000P100VHD-1500-5-W 1500 / 1.96 5 10000 / 22000P100VHD-1900-4-H 1990 / 78.35 3300 / 129.92 3085 / 121.46 1900 / 2.49 4 3250 / 7150 10000 / 22000P100VHD-1900-4-W 1990 / 78.35 3300 / 129.92 3085 / 121.46 1900 / 2.49 4 3100 / 6820 10000 / 22000P100VHD-2000-5-H 2330 / 91.73 3400 / 133.86 3090 / 121.65 2000 / 2.62 5 3860/ 8492 10000 / 22000P100VHD-2000-5-W 2330 / 91.73 3400 / 133.86 3090 / 121.65 2000 / 2.62 5 3650/ 8030 10000 / 22000P100VHD-2500-5-H 2360 / 92.96 3645 / 143.50 3220 / 126.86 2500 / 3.27 5 3930 / 8646 10000 / 22000P100VHD-2500-5-W 2360 / 92.96 3645 / 143.50 3220 / 126.86 2500 / 3.27 5 3720 / 8184 10000 / 22000P100VHD-3000-5-H 2360 / 92.96 3970 / 156.30 3390 / 133.46 3000 / 3.92 5 4030 / 8866 10000 / 22000P100VHD-3000-5-W 2360 / 92.96 3970 / 156.30 3390 / 133.46 3000 / 3.92 5 3800 / 8360 10000 / 22000

Package consists of: orange peel grab, integrated rotation with sturdy slewing ring, head plate, hose guard, non-return valve andbolt-on bottom plate with welded lifting eye

AccessoriesType Description

KM 501 19t-60t upper suspension without pendulum damper

Orange peel grab with 4 or 5 tines and 1500 l / 1.96 c.y. , 1900 l / 2.49 c.y., 2000 l / 2.62 c.y., 2500 l / 3.27 c.y. or 3000 l / 3.92 c.y. volume for the handling of bulky scrap with excavators from 50t / 110000 lbs to 100t / 220000 lbs operating weight - for heavy duty tasks.l Available in five different volumes, with 4 or 5 tines and with diverse tine profiles (see technical drawings below). l Hydraulic cylinders are fitted with replaceable piston rod protection and are hydraulically cushioned.l Oil distributor mounted underneath and integrated non-return valve directly above the rotation drive.l Oil distribution and hydraulic hoses are protected in the carrier.l Greasing points are easily accessible.l Reinforced tines made of wear resistant steel HB 400.l Weld-on tips made of high wear resistant steel HB 500. l High closing force 56 kN / 12320 lbf at an Operating pressure of 35 MPa / 5040 psi.l Accurate fittings eliminate tine distorsion, solid end stops (open & close).l Reinforced bolts, large bearing surface for bolts, specially coated solid steel bushings.l Robust, fully integrated rotation with sturdy slewing ring with internal hoses guarantees optimum force transmission and prevents hose break. The integrated pressure relief valve protects against overcharge. l Swivel and bevel sealed. Rotary feedthrough and motor accessible directly.

Requirements of ExcavatorOperating pressure (open/close): max. 35 MPa (350 bar) / 5040 psiRecommended oil flow (open/close): max. 400 l/min / max. 105.68 GPMHydraulic connection (open/close): 1¼“Operating pressure (rotation): max. 17 MPa (170 bar) / 2448 psiRecommended oil flow (rotation): 40 - max. 75 l/min / 10.57 - max. 19.82 GPMHydraulic connection (rotation): 1/2“

Technical Drawings


W: Wide Tines

P100VHD-2500-5-H

more data coming soon

15 t … 20 t … 30 t … 40 t … 50 t … 60 t … 70 t … 80 t … 90 t … 100 t

16


15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t … 25 t … 30 t … 35 t … 50 t … 65 t

Multi-Quick Processor

UNIQUE JAW EXCHANGE SYSTEMFast. Easy. Safe.

Jaw Options:

Rotation with additional oil passage

Rotation circuit filters

Twin rotation motors

All wear parts are exchangeable on site

Guide plate at pivot point for more precise alignment and greater jaw stability

The patented DemaPower cylinder concept provides up to 20% more power and extremely fast cycle times

With the incorporated DemaLink the jaw set can be exchanged on site in less than 10 minutes

Exchanging Jaws

(Combi style shown)

MQP

Steel JawsPulveriser JawsCombi Jaws Demolition Jaws Tank Jaws Universal Jaws


15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t … 25 t … 27 t … 35 t 40 t 50 t … 65 t15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t … 25 t … 30 t … 35 t … 50 t … 65 t

Multi-Quick ProcessorMQP

Multi-Quick Processors / individual yokeType Operating weight

excavatorWeight Height Width Depth Cycle times

(open / close)(t/lbs) (kg/lbs) (mm/in) (mm/in) (mm/in) (sec)

MQP-25-Y 18 - 25 / 39600 - 55000 1215 / 2675 1095 / 43.11 640 / 25.20 1130 / 2486 1,5 / 2,3MQP-30-Y 22 - 35 / 48400 - 77000 1490 / 3280 1205 / 47.44 720 / 28.35 1190 / 46.85 2,0 / 2,3MQP-45-Y 32 - 50 / 70400 - 110000 1825 / 4015 1330 / 52.36 720 / 28.35 1290 / 50.79 2,0 / 2,9MQP-60-Y 45 - 65 / 99000 - 143000 2440 / 5370 1450 / 57.09 880 / 34.65 1485 / 58.46 2,0 / 2,8

MQP with Combi Jaws

Multi-Quick Processors / MQP completeType Weight Weight

(upper & lower jaws)

Closing Jaw Width lower jaw

Width upper jaw

Height Jaw depth(complete force * openingwith yoke) A B C D E

Combi Jaws: (kg/lbs) (kg/lbs) (t/lbs) (mm/in) (mm/in) (mm/in) (mm/in) (mm/in)MQP-25-C 2060 / 4532 845 / 1860 85 / 187000 785 / 30.91 375 / 14.76 90 / 3.54 1940 / 76.38 810 / 31.89MQP-30-C 2600 / 5720 1190 / 2620 100 / 220000 875 / 34.45 440 / 17.32 100 / 3.94 2155 / 84.84 920 / 36.22MQP-45-C 3365 / 7403 1540 / 3390 130 / 286000 990 / 38.98 450 / 17.72 100 / 3.94 2360 / 92.91 975 / 38.39MQP-60-C 4525 / 9955 2085 / 4590 150 / 330000 1150 / 45.28 480 / 18.90 100 / 3.94 2600 / 102.36 1050 / 41.34

Demolition Jaws:MQP-25-D 2085 / 4587 870 / 1915 90 / 198000 785 / 30.91 470 / 18.50 90 / 3.54 1980 / 77.95 810 / 31.89MQP-30-D 2690 / 5918 1200 / 2640 100 / 220000 870 / 34.25 470 / 18.50 100 / 3.94 2160 / 85.04 900 / 35.43MQP-45-D 3405 / 7491 1580 / 3475 130 / 286000 990 / 38.98 515 / 20.28 100 / 3.94 2355 / 92.72 960 / 37.80MQP-60-D 4495 / 9889 2055 / 4520 150 / 330000 1175 / 46.26 550 / 21.65 100 / 3.94 2600 / 102.36 1090 / 42.91

Pulveriser Jaws:MQP-25-P 2100 / 4620 885 / 1950 85 / 187000 790 / 31.10 400 / 15.75 325 / 12.80 1980 / 77.95 810 / 31.89MQP-30-P 2665 / 5863 1175 / 2585 100 / 220000 880 / 34.65 470 / 18.50 350 / 13.78 2165 / 85.24 830 / 32.68MQP-45-P 3450 / 7590 1625 / 3575 130 / 286000 980 / 38.58 515 / 20.28 400 / 15.75 2355 / 92.72 945 / 37.20MQP-60-P 4565 / 7590 2125 / 4675 150 / 330000 1150 / 45.28 560 / 22.05 450 / 17.72 2620 / 103.15 1050 / 41.34

Steel Jaws:MQP-25-S 1985 / 4367 770 / 1695 300 / 660000 370 / 14.57 320 / 12.60 100 / 3.94 1750 / 68.90 560 / 22.05MQP-30-S 2460 / 5412 970 / 2135 340 / 748000 410 / 16.14 355 / 13.98 120 / 4.72 1910 / 75.20 600 / 23.62MQP-45-S 3130 / 6886 1305 / 2870 415 / 913000 465 / 18.31 375 / 14.76 120 / 4.72 2105 / 82.87 700 / 27.56MQP-60-S 4315 / 9493 1875 / 4125 465 / 1023000 540 / 21.26 410 / 16.14 120 / 4.72 2335 / 91.93 750 / 29.53

Tank Jaws:MQP-25-T 2130 / 4686 915 / 2015 295 / 649000 330 / 12.99 265 / 10.43 100 / 3.94 1910 / 75.20 570 / 22.44MQP-30-T 2710 / 5962 1220 / 2684 360 / 792000 335 / 13.19 305 / 12.01 120 / 4.72 2070 / 81.50 575 / 22.64MQP-45-T 3320 / 7304 1495 / 3290 460 / 1012000 390 / 15.35 305 / 12.01 120 / 4.72 2260 / 88.98 630 / 24.80MQP-60-T 4460 / 9812 2020 / 4445 655 / 1441000 400 / 15.75 355 / 13.98 150 / 5.91 2415 / 95.08 660 / 25.98

Universal Jaws:MQP-30-U 2640 / 5808 1150 / 2530 110 / 242000 590 / 23.23 500 / 19.69 280 / 11.02 2040 / 80.31 790 / 31.10MQP-45-U 3195 / 7029 1370 / 3015 145 / 319000 690 / 27.17 525 / 20.67 310 / 12.20 2210 / 87.01 830 / 32.68MQP-60-U 4425 / 9735 1985 / 4367 180 / 396000 790 / 31.10 590 / 23.23 340 / 13.39 2470 / 97.24 870/ 34.25* closing force for C-, D-, P- and U-jaw measured at front tooth, for S- and T-jaw measured at mid point of inner blade

Requirements of Excavator Technical DrawingsOperating pressure (open/close): max. 38 MPa (380 bar) / 5472 psiRecommended oil flow (open/close): MQP-25 120 - max. 200 l/min / 31.70 - max. 52.84 GPM MQP-30 150 - max. 250 l/min / 39.63 - max. 66.05 GPM MQP-45 200 - max. 300 l/min / 52.84 - max. 79.26 GPM MQP-60 300 - max. 400 l/min / 79.26 - max. 105.68 GPM

Operating pressure (rotation): max. 14 MPa (140 bar) / 2016 psiRecommended oil flow (rotation): 40 - max. 60 l/min / 10.57 - max. 15.85 GPM

MQP with Steel Jaws

Used for cutting and crushing concrete with steel reinforcement and cutting steel structures, the Kinshofer Multi-Quick Processor with DemaPower and DemaLink was developed for primary and secondary demolition. It has six convenient jaw options:Combi, Demolition, Pulveriser, Steel, Tank and Universal jaws

l The patented DemaPower cylinder provides up to 20% more power and reduces cycle times to under 5 seconds.l Rotation circuit filters.l Rotation head with additional oil passage.l Twin rotation motors for extra rotation power.l Guide plate at pivot point for more precise alignment and greater jaw

stability.l All teeth and cutting blades are exchangeable.l Bearing points engineered for optimum load handling and reduced wear.l With the integrated DemaLink the jaw set can be exchanged on site in less than10 minutes.


Mobile Shears with 360° Rotation

14 t …20 t … 25 t 30 t … 50 t … 65 t … 75 t 80 t 90 t 100 t…

DRS

525

150

830

720

1685

4100

1165

A

C

B

DRS-75-A

Mobile Shears with 360° Rotation DRS / rigid mount (without Rotation)Type Weight Length A Jaw opening Jaw depth Primary Cutting force* Operating Operating

(w/o adapter) (w/o adapter) B C cutter length weight (boom) weight (dipper)(kg/lbs) (mm/in) (mm/in) (mm/in) (mm/in) (kN/lbf ) (t/lbs) (t/lbs)

DRS-25-A 2150 / 4730 2740 / 107.87 500 / 19.69 460 / 18.11 180/280 / 7.09/11.02 4600 / 1012000 14 - 20 / 30800 - 44000

20 - 30 /44000 - 66000

DRS-30-A 3100 / 6820 2965 / 116.73 570 / 22.44 490 / 19.29 200/300 / 7.87/11.81 6700 / 1474000 18 - 25 /39600 - 55000

25 - 35 / 55000 - 77000

DRS-45-A 4100 / 9020 3290 / 129.53 625 / 24.61 540 / 21.26 225/330 / 8.89/12.99 8210 / 1806200 25 - 35 / 55000 - 77000

32 - 50 /70400 - 110000

DRS-60-A 5550 / 12210 3660 / 144.09 720 / 28.35 620 / 24.41 250/380 / 9.84/14.96 10990 / 2417800 30 - 50 /66000 - 110000

45 - 65 / 99000 - 143000

DRS-60-B 5640 / 12410 4100 / 161.42 720 / 28.35 620 / 24.41 250/380 / 9.84/14.96 10990 / 2417800 30 - 50 /66000 - 110000 -

DRS-60-C 4850 /10670 3285 / 129.33 720 / 28.35 620 / 24.41 250/380 / 9.84/14.96 10990 / 2417800 25 - 35 /55000 - 77000 -

DRS-75-A 6950 / 15290 4075 / 160.43 835 / 32.87 720 / 28.35 300/440 / 11.81/17.32 14270 / 3139400 35 - 65 / 77000 - 143000

60 - 80 / 132000 - 176000

DRS-75-B 7050 / 15510 4550 / 179.13 835 / 32.87 720 / 28.35 300/440 / 11.81/17.32 14270 / 3139400 35 - 65 / 77000 - 143000 -

DRS-75-C 6200 / 13640 3650 / 143.70 835 / 32.87 720 / 28.35 300/440 / 11.81/17.32 14270 / 3139400 30 - 50 /66000 - 110000 -

DRS-90-A 8500 / 18700 4800 / 188.98 950 / 37.40 815 / 32.09 350/480 / 13.78/18.90 19450 / 4279000 45 - 80 /99000 - 176000

75 - 100 /165000 - 220000

DRS-90-B 8600 / 18920 5000 / 196.85 950 / 37.40 815 / 32.09 350/480 / 13.78/18.90 19450 / 4279000 45 - 80 /99000 - 176000 -

DRS-90-C 7700 / 16940 4100 / 161.42 950 / 37.40 815 / 32.09 350/480 / 13.78/18.90 19450 / 4279000 40 - 70 / 88000 - 154000 -

*cutting force calculated at a distance of 120 mm / 4.72 in (DRS-25) / 140 mm / 5.51 in (DRS-30) / 160 mm / 6.30 in (DRS-45 to DRS-90) from center of pin

HydraulicsType Open/ Close Rotate Back pressure Working cycle

Pressure max. Recommended oil flow Pressure max. Recommended oil flow max. Open/ Close(bar/psi) (l/min / GPM) (bar/psi) (l/min / GPM) (bar/psi) (sec)

DRS-25 380 / 5472 150 - max. 250 / 39.63 - max. 66.05 140 / 2016 40 - max. 60 / 10.57 - max. 15.85 - 2.4 / 2.3DRS-30 380 / 5472 200 - max. 300 / 52.84 - max. 79.26 140 / 2016 40 - max. 60 / 10.57 - max. 15.85 - 2.9 / 3.0DRS-45 380 / 5472 300 - max. 400 / 79.26 - max. 105.68 140 / 2016 40 - max. 60 / 10.57 - max. 15.85 - 3.7 / 2.2

DRS-60 380 / 5472 400 - max. 600 / 105.68 - max. 158.52 200 / 2880 max. 60 / 15.85 10 / 144

(drain line required) 3.0 / 2.2

DRS-75 380 / 5472 600 - max. 800 / 158.52 - max. 211.36 200 / 2880 max. 60 / 15.85 10 / 144


DRS-90 380 / 5472 700 - max. 1000 / 184.94 - max. 264.20 200 / 2880 max. 80 / 21.14 10 / 144


Technical Drawings

The Kinshofer DRS Mobile Shear with its 360° rotation has been engineered to achieve an optimal power to weight ratio. This robust tool can be used for a wide variety of jobs including steel structural demolition, scrap yards, conditioning of industrial mixed scrap and even processing steel-reinforced concrete. With three different mounting options, the DRS line is available in five different sizes, suitable for excavators from 14t / 30800 lbs to 100t / 220000 lbs operating weight. l Powerful cylinder with speed valve – fully protected in the housing.l Housing made of extremely resistant special steel.l Heavy duty bearings for reduced bushing wear – without allowance.l Very high cutting force: optimal power to weight ratio. Robust mouth.l Optimal mouth design with large opening for scrap.l More cutting force by displaced angles of the two cutting blades.l All wear cutting blades can be turned four times and – whenever material gets jammed – be loosened from outside.l Exchangeable, weldable piercing tip.l Heavy duty 360° rotation with oversized slewing ring, driven by (two) motors. Also available without rotation.


DRS-75-C

non-rotating, for mount on boom with a weld-on adapter**

DRS-75-B

rotating, for mount on boomwith a weld-on adapter**

DRS-75-A

rotating, for mount on dipper or boom with a bolt-on adapter**

**note: adapters are not inclusive

Technical Drawings

14 t …20 t … 25 t 30 t … 50 t … 65 t … 75 t 80 t 90 t 100 t…

DRSPerformance DataType Narrow Middle Narrow Middle Wide

I-beam I-beam H-beam H-beam H-beamDRS-25 IPE 450 INP 320 HEA 280 HEB 200 HEM 100DRS-30 IPE 500 INP 400 HEA 340 HEB 260 HEM 140DRS-45 IPE 600 INP 450 HEA 400 HEB 300 HEM 160DRS-60 IPE 700 INP 500 HEA 500 HEB 360 HEM 180DRS-75 IPE 800 INP 550 HEA 600 HEB 400 HEM 200DRS-90 IPE 900 INP 600 HEA700 HEB 450 HEM 220

Type Round Hot rolled Hot rolled Sheet steel Steel tubeangle steel round steel square steel thickness Ø x thickness

DRS-25 200 x 200 x 15 / 7.87 - 7.87 x 0.59 Ø 75 / 2.95 65 x 65 / 2.56 x 2.56 15 / 0.59 254 x 9 (16“) / 10.00 x 0.35DRS-30 250 x 250 x 20 / 9.84 x 9.84 x 0.79 Ø 90 / 3.54 80 x 80 / 3.15 x 3.15 20 / 0.79 304 x 10 (12“) / 11.97 x 0.39DRS-45 250 x 250 x 25 / 9.84 x 9.84 x 0.98 Ø 100 / 3.94 90 x 90 / 3.54 x 3.54 25 / 0.98 406 x 10 (16“) / 15.98 x 0.39DRS-60 300 x 300 x 25 / 11.81 x 11.81 x 0.98 Ø 115 / 4.53 100 x 100 / 3.94 x 3.94 25 / 0.98 457 x 10 (18“) / 17.99 x 0.39DRS-75 300 x 300 x 30 / 11.81 x 11.81 x 1.18 Ø 130 / 5.12 120 x 120 / 4.72 x 4.72 30 / 1.18 559 x 10 (22“) / 22.01 x 0.39DRS-90 350 x 350 x 30 / 13.78 x 13.78 x 1.18 Ø 150 / 5.91 135 x 135 / 5.31 x 5.31 35 / 1.38 609 x 10 (24“) / 23.98 x 0.39Dimensions: standardized wide flange beams (HEA, HEB, HEM) and section steel (IPE, INP) according to DIN EN 10 034 or cross section / sheet thickness in mm / in

Note: The capability to cut the above profiles assumes the tensile strength of the steel 370 N/mm² as well as the shear operating pressure of 350 bar / 5040 psi. In borderline cases, we recommend an actual test cut is made to determine whether the profile in question can be cut. Larger beams can be often cut in two steps.

Mobile Shears with 360° Rotation


**note: adapters are not inclusive

RC 30

15 t 16 t 17 t 18 t 19 t 20 t 21 t 22 t … 25 t … 27 t … 35 t 40 t 50 t8 t 10 t 12 t 14 t 16 t 18 t 20 20 t 22 t 24 t … 27 t … 30 t … 35 t

Mobile Rail Cutter

Mobile Rail Cutter RC 30Type Service weight Length Jaw opening Jaw depth Heavy Duty Operating

(w/o adapter) A B C Rotation weight*(kg/lbs) (mm/in) (mm/in) (mm/in) (t/lbs)

RC 30 2650 / 5830 2335 / 91.93 225 / 8.86 190 / 7.48 360° 22 - 35 / 48400 - 77000* decisive for the mounting of the shear is the payload of the excavator


Operating pressure (open/close) : max. 26 MPa (260 bar) / 3744 psi back pressureRecommended oil flow (open/close) : 150 - max. 250 l/min / 39.63 - max. 66.05 GPM 0,5 MPa (5 bar) / 72 psiOperating pressure (rotate) : max. 14 MPa (140 bar) / 2016 psiRecommended oil flow (rotate) : 18 - max. 25 l/min / 4.76 - max. 6.61 GPM

Technical Drawings – Example of Use

The mobile Kinshofer Rail Cutter RC 30 is a special development for the controlled demolition of rail systems and for the scrap preparation of railway lines. All current Vignol rails (flat bottom rails) with a standard quality up to 900 N/mm² and a profile size „S7“ to „UIC 60“ can be cut. Vignol rails in special qualities exceeding 900 N/mm² or with head hardening are excluded. The wear of the cutters highly depends on the quality of the rails. The mobile Rail Cutter RC 30 is ideal for excavators with an operating weight of 22 - 35t / 48400 - 77000 lbs.

l Patented DemaPower cylinder.l Large heavy duty bearings for reduced bushing wear.l Housing made of extremely resistant special steel.l Heavy duty 360° rotation.

RC 30


ROB with plastic bristles

ROB with rubber hoses for ballast

ROB with steel bristles

2 t1 t ... 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 25 t 28 t 30 t

The SKB Sweeper Roller is the perfect tool for levelling slopes, lawns, gravelled areas, etc. Available for loaders as well. The ROB Rotor Brush is used to clean smaller areas or to level gravel etc. For excavators from 1t / 2200 lbs up to 20t / 44000 lbs operating weight.SKB:l Wide range of widths: 1000 mm / 39.37 in - 3000 mm / 118.11 in available, equipped with

300 mm / 11.81 in bristles.l Efficiency: can be equipped with different brushes for different applications. The same frame can

be used for different rollers. l Bristles level slopes, lawns, gravelled areas, etc.ROB:l Flexible: different brushes available (steel or synthetic bristles, rubber hoses) for all jobs.

Cleaning and flattening smaller areas or levelling loose materials such as gravel, ballast, ballast, etc.

l Optional rubber guard: if used in the public in narrow areas, you can use the brush with a rubber guard for additional security. Can be mounted on either side.

l Low oil consumption.

Sweeper Roller / Rotor BrushSKB / ROB

Sweeper Rollers SKB

Type Bristle Sweep Weight Width Height Depthlength diameter

(mm/in) (mm/in) (kg/lbs) (mm/in) (mm/in) (mm)SKB 10 300 / 11.81 900 / 35.43 280 / 616 1000 / 39.37 1200 / 47.24 1200 / 47.24SKB 15 300 / 11.81 900 / 35.43 330 / 726 1500 / 59.06 1200 / 47.24 1200 / 47.24SKB 20 300 / 11.81 900 / 35.43 380 / 836 2000 / 78.74 1200 / 47.24 1200 / 47.24SKB 26 300 / 11.81 900 / 35.43 420 / 924 2600 / 102.36 1200 / 47.24 1200 / 47.24SKB 30 300 / 11.81 900 / 35.43 475 / 1045 3000 / 118.11 1200 / 47.24 1200 / 47.24Package consists of: sweeper roller

Rotor Brush ROB

Type Sweep diameter Weight Length(mm/in) (kg/lbs) (mm/in)

ROB 20 900 / 35.43 170 / 374 1600 / 62.99Package consists of: rotor brush


One hydraulic circuit needed Operating Pressure: max. 20 MPa (200 bar) / 2880 psiRecommended oil flow: SKB: 40 - max. 150 l/min / 10.57 - max. 39.63 GPM ROB: 30 - max. 60 l/min / 7.93 - max. 15.85 GPMDifferent couplings available

Pictures

SKB

ROB

Snow Sweeper

Exchangeable: plastic bristles for SKB 26


6 t3 t 8 t 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 25 t 28 t 30 t

SKB-BallastBallast BrushThe SKB-Ballast Brush is the perfect tool for clearing scrap yards from smaller metal pieces. Available for excavators and loaders. l Wide range of widths: 1000 mm / 39.37 in - 3000 mm / 118.11 in

available, sweep diameter is 950 mm / 37.40 in.l Efficiency: can be equipped with different brushes for different

applications. The same frame can be used for different rollers. l Rubber bristles (330 mm / 12.99 in) sweep away smaller metal

pieces.l Robust rubber skirts avoid unintended spreading of the scrap parts.

Ballast Brush SKB-Ballast

Type Bristles Sweep Weight Width Height Depthlength diameter

(mm/in) (mm/in) (kg/lbs) (mm/in) (mm/in) (mm/in)SKB-Ballast 10 330 / 12.99 950 / 37.40 280 / 616 1000 / 39.37 1200 / 47.24 1200 / 47.24SKB-Ballast 15 330 / 12.99 950 / 37.40 350 / 770 1500 / 59.06 1200 / 47.24 1200 / 47.24SKB-Ballast 20 330 / 12.99 950 / 37.40 380 / 836 2000 / 78.74 1200 / 47.24 1200 / 47.24SKB-Ballast 26 330 / 12.99 950 / 37.40 420 / 924 2600 / 102.36 1200 / 47.24 1200 / 47.24SKB-Ballast 30 330 / 12.99 950 / 37.40 475 / 1045 3000 / 118.11 1200 / 47.24 1200 / 47.24

Package consists of: ballast brush


One hydraulic circuit neededOperating pressure: max. 20 MPa (200 bar) / 2880 psiRecommended oil flow: 60 - max. 200 l/min / 15.85 - max. 52.84 GPMDifferent couplings available

Pictures

SKB-Ballast with skirt, raised


6 t3 t 8 t 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 26 t 28 t 30 t

BST / BST RT Brooms

BST with adapters for excavator and pallet fork. Here: mounted to forks

The BST and BST RT Brooms are the ideal tools for levelling out rubble, gravel, top soil, ballast, etc. They are also suited to sweep water or snow.

l Compact and robust design: long service life. l Different widths available: 1200 mm / 47.24 in - 2400 mm / 94.49 in

for BST; 1500 mm / 59.06 in - 2000 mm / 78.74 in for BST RT.l Additional rubber blade: standard for BST RT;

for BST as optional accessory available.l Easy to fit: can be mounted to different carrier machines. l BST RT: also sweeps corners perfectly. Suited for Tiltrotators.l BST: can be mounted to excavators, tractorsand loaders. Coupling for

pallet fork available.

Brooms BST / BST RT

Type Weight Width

(kg/lbs) (mm/in)BST 12 130 / 286 1200 / 47.24BST 14 150 / 330 1400 / 55.12BST 16 170 / 374 1600 / 62.99BST 18 190 / 418 1800 / 70.87BST 20 230 / 506 2000 / 78.74BST 24 280 / 616 2400 / 94.49BST RT 15 128 / 282 1500 / 59.06BST RT 20 167 / 367 2000 / 78.74

Package consists of: brush, bristle set, fork coupling

Optional for BST: with central rubber blade


Different couplings available

Pictures

BST

BST RT

The BST RT – either mounted to a NOX Tiltrotator (above) or a fork truck (below) – cleans angles thoroughly and is levelling soft surfaces while cleaning them


6 t3 t 8 t 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 26 t 28 t 30 t

SKSBucket SweeperThe SKS Bucket Sweepers are the perfect tools for flattening and carrying surplus materials from slopes, lawns, gravelled surfaces, etc. Equipped with a ballast sweeper, ballast areas and routes can easily be flattened and cleaned up. Shovel and broom function: Surplus materials like asphalt pieces or waste like trunk chips can be taken away by means of the integrated bucket. Also available for loaders. l Different widths available: 1500 mm / 59.06 in - 3000 mm / 118.11 in,

furnished with a bristle diamter of 915 mm / 36.02 in.l Other sizes and models available.l Efficient: can be furnished with different bristles for different jobs. For

example with rubber pipes or optionally with additional lateral rotor brush.

l Integrated bucket: picks up surplus material and waste.l Flexible: not only available for loaders, but as a combination for loaders

and excavators too. Also available with rubber hoses for ballast.

Exchangeable:SKS with plastic

bristles or rubber hoses

SKS with rubber hoses

Bucket Sweeper SKS

Type Bristle Weight Width Bucket Operatingdiameter volume weight

NEW TYPES (mm/in) (kg/lbs) (mm/in) (l/c.y.) (max. t/lbs)SKS 15 915 / 36.02 330 / 726 1500 / 59.06 415 / 0.54 <18 / 39600SKS 20 915 / 36.02 500 / 1100 2000 / 75.74 460 / 0.60 <22 / 48400SKS 26 915 / 36.02 650 / 1430 2600 / 102.36 700 / 0.92 <22 / 48400SKS 30 915 / 36.02 760 / 1672 3000 / 118.11 745 / 0.97 <24 / 52800

Package consists of: bucket sweeper

Requirements of ExcavatorOne hydraulic circuit neededOperating pressure: max. 20 MPa (200 bar) / 2880 psiRecommended oil flow: 60 - max. 200 l/min / 15.85 - max. 52.84 GPMDifferent couplings available

Pictures


Brush CutterSLA

6 t2 t 8 t 10 t 12 t 14 t 16 t 18 t 20 t 22 t 24 t 25 t 28 t 30 t

The Brush Cutter SLA cuts high grass, bushes, thicket, protruding or overhanging branches easily – or the usual mix of all together at embankments or uncultivated areas. It does not only cut, but also mulches by means of special knives – for excavators with 2 t / 4400 lbs to 25t / 55000 lbs operating weight and for loader cranes in the railway sector. l Ideal for cutting brush and scrub, thicket and bushes.l Professional cutting and mulching by I/Y-formed movable

knive-bundles.l Strong and efficient.l Heavy construction for a long service life.

Brush Cutter

Type Width Weight Working max. Branch Recommended Operatingwidth thickness oil flow weight

(mm/in) (kg/lbs) (mm/in) (mm/in) (l/min / GPM) (t/lbs)SLA 2 1000 / 39.37 160 / 352 650 / 25.59 60 / 2.36 26 / 6.87 2 - 4 / 4400 - 8800SLA 4 1100 / 43.31 210 / 462 800 / 31.50 80 / 3.15 36 / 9.51 3 - 5 / 6600 - 11000SLA 6 1300 / 51.18 280 / 616 1000 / 39.37 80 / 3.15 36 / 9.51 3 - 6 / 6600 - 13200SLA 12 1600 / 62.99 570 / 1254 1300 / 51.18 120 / 4.72 66 / 17.44 7 - 11 / 15400 - 24200SLA 14 1900 / 74.80 670 / 1474 1600 / 62.99 120 / 4.72 80 / 21.14 9 - 13 / 19800 - 28600SLA 20 2100 / 82.68 750 / 1650 1900 / 74.80 120 / 4.72 100 / 26.42 14 - 25 / 30800 - 55000


Two hydraulic circuits needed for SLA 2 / SLA 4 / SLA 6 – two hydraulic cycles and free drain line to tank for SLA 12 / SLA 14 and SLA 20 Operating pressure: max. 25 MPa (250 bar) / 3600 psiRecommended oil flow: see table aboveDifferent couplings available

Pictures

Special knife-bundle made of three movable parts. The central knife cuts the raw pieces into fine mulch material

SLA 12 mounted on a NOX Tiltrotator to an excavator SLA 4 mounted on a trailer-mounted Loader Crane


Price

(€)7.035.–8.350.–9.110.–

10.880.–11.895.–12.805.–

27

For MATERIAL HANDLING you can get a special catalog!Please order - eMail: [email protected]

We reserve the right to amend specifications without prior notice. Kinshofer GmbH, 83666 Waakirchen, Germany

Upfront, everywhereKINSHOFER is an ISO 9001 certified Company. DVS ZERT is a registred trademark of DVS ZERT® e.V., Düsseldorf.

www.kinshofer.com

EXA

-KIN

-SCR

-E-0

115Hauptsitz Deutschland:

Kinshofer GmbHHauptstrasse 7683666 WaakirchenTel.: +49 (0)8021 – 88 99 0Fax: +49 (0)8021 – 88 99 37Email: [email protected]

United Kingdom:Kinshofer UK Ltd.4 Milton Industrial CourtHorsfield Way, BredburyStockport, Cheshire, SK6 2TATel.: +44 (0)161 – 406 7046Fax: +44 (0)161 – 406 7014Email: [email protected]

France: Kinshofer  France S.A.R.L.B.P. 20100F-67213 Obernai CedexTel.:   +33(0) 3 88 39 55 00Fax:  +33(0) 3 88 79 06 75Email: [email protected]

Canada: Kinshofer North America5040 Mainway Drive, Unit #11Burlington, ON L7L 7G5Tel.: +1 (905) 335 2856Fax: +1 (905) 335 4529Toll Free (North America): 1 (800) 268 9525Email: [email protected]

United States of America:Kinshofer USA6420 Inducon DriveSuite GSanborn, NY, 14132Tel.: +1 (716) 731 4333Toll Free (North America): 1 (800) 268 9525www.kinshofer.com

中国: Darda Kinshofer Construction Machinery Co. Ltd.Unit #306, Landmark Tower 28 Dongsanhuan Road Beijing 100004Tel.: +86 (10) 6590 6422Fax: +86 (10) 6590 6423Email: [email protected]

Suomi: Kinshofer Finland OyRealparkinkatu 9,FI-37570 LempääläTel.: +358 (0)75 7540 200Fax: +358 (0)3 6870 466Email: [email protected]

Sverige: RF System AB Furutorpsgatan 6SE-288 34 VinslövTel.: +46 (0)44 817 07Fax: +46 (0)44 859 63Email: [email protected]

construction – general construction construction … · · 2016-04-19auger torque europe ltd....

Documents