construction variants installation heights article

2
Planning principles Preparation and sub-construction Prepare the the ground around all sides 500mm larger in size than the terrace deck and with a 4% gradient. Create a weight-bearing and frostproof gravel or crushed rock bed with a 2% incline and screed with fine gravel (level out any unevenness). Do not fill in any cavities between the construction beam, the concrete edge stone and the base of the Fix SteP! Avoid soil contact! (exception: items from the construction plank range)! Lay the substructure system in accordance with the construction plan! Floorboard assembly Differences in the floorboards are intended and underline the natural wood look. Mix the floorboards before laying them in order to support the effect. Observe the laying direction (refer to the arrow in the floorboard groove or on the label)! Do not exceed the max. 50 mm floorboard protrusion over the sub-structure! Assembly and production-related dimension tolerances regarding the length, width and thickness are to be taken into account and checked! Cutting the longitudinal side of the floorboards may result in floorboard offset. W W W . M E G A W O O D . C O M IMPRINT Publisher: NOVO-teCH trading GmbH & Co. KG, Siemensstraße 31, 06449 Aschersleben, Germany Conception/design/layout: toolboxx-media, Magdeburg, Germany Picture credits: Christian Wolf, Aschersleben, Germany Subject to change. Colours and graphics may differ due to printing processes. Date: 1. edition 2020 EN / 31.01.2020 YOUR SUPPLIER the megawood ® construction plan forms the basis for all of the laying variations! No warranty is provided in the event of deviations being made from the construction plan or should items be used other than original megawood ® items! Lay the terrace floorboards in a longitudinal direction with an adequate gradient in order to ensure that water is always able to drain off from the deck, this conforms with the principles of structural wood preservation. the risk of water stains, waterlogging and build up of organic substances is reduced by adhering to this. Applications that require building approval are to be provided with a statically sufficiently dimensioned, supporting and fall-through proof sub-structure as a support for megawood ® barefootboards or substructures/construction planks. A min. gradient of 2% is recommended for deck superstructures with an open gap. A min. gradient of 2% is absolutely necessary for deck superstructures with a closed gap. ensure sufficient ventilation from beneath and the rear, e.g. with the megawood ® ventilation grid. Avoid waterlogging by using a drainage system that is adequately dimensioned! ensure an unrestrained expansion of the terrace deck (min. distance of 20 mm between the floorboards and solid components)! Always pre-drill all holes so that the part that is to be fixed is 2 mm larger than the screw diameter and the retaining drill hole is 0.5 mm smaller than the screw diameter! All dimensions are to be checked on site Coordination with the manufacturer must take place and respective approval must be obtained in the event of special structures that deviate from this construction plan or the online planner in order for any potential warranty claims to be accepted. the thermal characteristics of the material that the corresponding article is made of is to be taken into account (recommended laying temperature 5°-25°C) when using the P5 joint profile. When building the terrace, the wind load must be taken into con sideration as a liſting load in the construction. General information You should cover your terrace in shade when it is exposed to intense sunlight during hot summer temperatures. this particularly protects the sensitive feet of children against hot surfaces. in addition it prevents skin damage caused by excessive UV rays. A conscious effort in terms of protec- ting against the severe impacts of the Sun ensures a carefree barefoot experience. Online Planner this basic construction plan explains the standard structure versions for rectangular decks when laying in the longitudinal direction. Special styles, mitre cuts, braces and diagonal laying are illustrated individually in our “megaplaner“. www.megawood.com/108 NEW CONSTRUCTION WOOD ROUND | SQUARE | OCTAGONAL | OVAL Ø 90 mm | 90 x 90 mm | 90 x 90 mm | 90 x 60 mm L: 360 cm CONSTRUCTION WOOD LAVA BROWN BASALt GReY NAtURAL BROWN NUt BROWN SLAte GReY iNGWeR SeL GRiS LORBeeR megalite LIGHT SYSTEM LED SPOT MINI/MAXI Ø 34 mm (0.25 W, 10 lm) Ø 60 mm (0.5 W, 28 lm) 24 V DC iP67 Stainless steel LED LINEAR LIGHTS H: 21 mm; B: 62 mm L: 3,600 mm (27 W, 729 lm) 4,800 mm (36 W, 972 lm) 6,000 mm (45 W, 1215 lm) 27 lm/W; 24 V DC iP65 Aluminium/plastic install lamps at a max. distance of 50 mm from a construction beam. Lay an additional beam if necessary. Note: the lights are equipped with LeD lamps from energy classes A++ to A. the lamps installed in the lights cannot be replaced. Further information regarding the installation of megalite LeD spotlights can be found here: www.megawood.com/121 POSTS ROUND | SQUARE | OCTAGONAL | OVAL Ø 90 mm | 90 x 90 mm | 90 x 90 mm | 90 x 60 mm L: 220 | 270 cm TRANSOM 40 x 112 mm 90 x 60 mm L: 178,6 cm LIMES FENCING SYSTEM PANEL AUGUSTA (wavy) 270 x 35 mm L: 160,2 | 210 cm PANEL COLONIA (smooth) 239 x 6 mm L: 158,4 | 210 cm CONNECTING SPACER 38 x 30 mm L: 156,6 | 178,6 190 cm FENCE SET STAINLESS STEEL BAR Panel Augusta (wavy) Up to 10 % incline without diagonal cut to the panel CONSTRUCTION PLANK 40 x 112 mm | L: 360 cm 40 x 145 mm | L: 420 cm RHOMBUS PROFILE 20.5 x 81 mm | L: 420 cm Attractive wood cladding can be obtained using the new rhombus profile. it is also possible to screw it on visibly or you can also use a clip so that it is concealed. VARiA GReY VARiA CHOCOLAte BLACK You will find the entire item summary for the Limes fencing system here: www.megawood.com/129 min. 171 mm min. 121 mm Locking clamp Screw (7.5 x 132 mm, pre-drill!) Construction beams (90 x 90 mm) Rubber pad (10 x 100 x 60 mm) for height compensation measuring 3/10/20 mm in thickness Concrete edge stone (50 x 1000 x 250 mm) (available from building material dealers) 93 mm 104 mm 116 mm 127 mm 139 mm 143 mm 154 mm 166 mm 177 mm 189 mm Construction beams (40 x 60 mm) Standard mounting Standard panel Construction beams (40 x 60 mm) Attachment Comfort pad Standard mounting Standard panel Two construction beams (40 x 60 mm) Two attachments Two comfort pads DUO mounting DUO edge panel CONSTRUCTION BEAMS 90 x 90 mm | L: 360 cm CONSTRUCTION BEAMS 40 x 60 mm | L: 360 cm SUB-CONSTRUCTION SCREW 40/60 7,5 x 92 mm, incl. tx 30 and SDS drill (Ø 6.5 mm) SUB-CONSTRUCTION SCREW 90/90 7,5 x 132 mm, incl. tx 30 and SDS drill (Ø 6.5 mm) CONNECTING CLIP for construction beams 28x 76 mm L: 360 cm GROOVE STRIP (on a roll) 21 mm | L: 25/100 m for closed gap for (CLASSiC, PReMiUM, PReMiUM PLUS) Open gap without groove strip FIX STEP basis sub-structure HOUSE CONNECTION PROFILE 21 mm | L: 400 cm silver/bronze/anthracite Basis concrete edge stone sub-structure GROOVE BRIDGE 55 x 8 x 10 mm, for fastening the locking clamp on a construction beam gap CONNECTING CLIP for construction beams 28 x 76 mm | L: 360 cm RUBBER PAD 60 x 100 mm thickness: 3/10 /20 mm HOUSE CONNECTION PROFILE 21 mm | L: 400 cm silver/bronze/anthracite FIX STEP DUO EDGE PANEL 280 x 260 x71 mm FIX STEP DUO EDGE MOUNTING 250x60x55 mm FIX STEP STANDARD PANEL 270 x 180 x 71 mm FIX STEP STANDARD MOUNTING 116x60x55 mm ASSEMBLY CLIP 78x40x20 mm CONSTRUCTION BEAMS 40x60 mm | L: 360 cm FASTENING SCREW M8 x 80 for smooth edge board, complete with nut and washer FIX STEP ATTACHMENT 79x58x83mm FIX STEP COMFORT PAD for footstep cushioning FIX STEP comfort sub-structure (raised) Closed gap with groove strip/P5 gap profile – raised construction ensures the required ventilation Raised concrete edge stone sub-structure SPACER assembly aid for setting the floorboard gaps (approx. 5 mm/ approx. 8 mm) RETAINING BAND L: 10 m (on a roll), self-adhesive FASTENING SCREW M8 x 80 for smooth edge board, complete with nut and washer SPACER assembly aid for setting the floorboard gaps (approx. 5 mm/ approx. 8 mm) Groove strip with clip Construction variants Installation heights Article overview Supplementary products Deck covering PREMIUM PLUS BAREFOOTBOARD 21 x 242 mm L: 360/420/480/540/600 cm 25 x 293 mm L: 360/420/480/540/600 cm CLASSIC SMOOTH EDGE BOARD 17 x 72 mm | L: 360 cm SIGNUM BAREFOOTBOARD 21 x 145 mm L: 300/360/420/480/540/600 cm 21 x 242 mm (Jumbo) L: 420/480/600 cm 293 mm 5 mm DYNUM SMOOTH EDGE BOARD 17 x 72 mm | L: 360 cm BAREFOOTBOARD 21 x 145 mm L: 300/360/420/480/540/600 cm 21 x 242 mm (Jumbo) L: 300/360/420/480/540/600 cm SMOOTH EDGE BOARD 17 x 72 mm | L: 360 cm GROOVE BRIDGE 55 x 8 x 10 mm, for fastening the locking clamp on a construction beam gap RETAINING BAND L: 10 m (self-adhesive) M6 x 16 FASTENING SCREW for perforated tape, complete with nut and washer SCREW SET 4 x 35 mm FIX STEP PERFORATED TAPE L: 10 m (on a roll) FIX STEP RUBBER PAD 300 x 300 mm, thickness: 3/5/10 mm SECURING CLAMP and EDGE CLAMP incl. screws (4 x 35 mm), Bit tx 20 GROOVE STRIP (on a roll) 21 mm | L: 25/100 m for closed gap (CLASSiC, PReMiUM, PReMiUM PLUS) Combination floorboard, finely corrugated on one side, grooved and brushed surface on the other, 8 mm gap Single-sided, textured, polished surface with colour gradient, 5 mm gap Oscillating planed surface, brushed underside, 8 mm gap textured on one side, oscillating brushed, polished surface, 5 mm gap PREMIUM BAREFOOTBOARD 21 x 145 mm L: 300/360/420/480/540/600 cm 21 x 242 mm (Jumbo) L: 420/480/600 cm SMOOTH EDGE BOARD 17 x 72 mm | L: 360 cm Oscillating planed surface, brushed underside, 8 mm gap Connecting clip SMOOTH EDGE BOARD 17 x 72 mm | L: 360 cm COLOURS NUt BROWN NAtURAL BROWN BASALt GReY LAVA BROWN SLAte GReY NUt BROWN NAtURAL BROWN BASALt GReY LAVA BROWN SLAte GReY MUSKAt tONKA CARDAMOM NiGeLLA VARiA BROWN VARiA GReY VARiA CHOCOLAte BLACK COLOURS MUSKAt tONKA COLOURS NAtURAL BROWN NUt BROWN BASALt GReY COLOURS LAVA BROWN SLAte GReY COLOURS NiGeLLA CARDAMOM 320 mm 70 mm 10 mm gap 10 mm gap Closed gap with groove strip/P5 gap profile – only with a raised superstructure using a 90 x 90 mm construction beam Open gap without groove strip/P5 gap profile Standard panel Edge panel Standard panel Edge panel 242 mm 242 mm 5 mm 145 mm 145 mm 5 mm 5 mm 145 mm ±0,5 mm ±0,5 mm ±0,5 mm ±0,5 mm BAREFOOTBOARD 21 x 145 mm L: 300/360/420/480/540/600 cm 21 x 242 mm (Jumbo) L: 300/360/420/480/540/600 cm 145 mm 145 mm 8 mm 8 mm 145 mm 242 mm 242 mm 8 mm ±0,5 mm ±0,5 mm ±0,5 mm 242 mm 242 mm 8 mm 145 mm 145 mm 8 mm 8 mm 145 mm ±0,5 mm ±0,5 mm ±0,5 mm 242 mm 242 mm 145 mm 145 mm 8 mm 8 mm 145 mm 8 mm ±0,5 mm ±0,5 mm ±0,5 mm LOCKING CLAMP and LOCKING CLAMP EDGE ZAMMER for the lock clip fastening FASTENER FASTENER FASTENER 293 mm 242 mm 242 mm 5 mm ±0,5 mm ZAMMER for the lock clip fastening CLIP and EDGE CLIP incl. screws (4 x 35 mm), Bit tx 20 FASTENER FASTENER CLASSIC VARIA BAREFOOTBOARD 21 x 195 mm L: 420/480/600 cm SMOOTH EDGE BOARD 17 x 72 mm | L: 360 cm Partially-grooved surface on one side with colour gradient, 5 mm gap COLOURS VARiA CHOCOLAte BLACK VARiA BROWN VARiA GReY 195 mm 195 mm 5 mm 5 mm 195 mm ±0,5 mm ±0,5 mm FASTENER P5 GAP PROFILE On a roll, for closed CLASSiC longitudinal gap (Varia) ROLLER Zammer attachment for the retraction of the joint profile OR OR SECURING CLAMP and EDGE CLAMP incl. screws (4 x 35 mm), Bit tx 20 LOCKING CLAMP and LOCKING CLAMP EDGE CLIP and EDGE CLIP incl. screws (4 x 35 mm), Bit tx 20 OR OR P5 GAP PROFILE On a roll, for closed CLASSiC longitudinal gap (Varia) DISTANZ FIX Spacer for front-end joints (when laying in a pattern) DISTANZ FIX Spacer for front-end joints (when laying in a pattern) Two construction beams (40 x 60 mm) DUO mounting DUO edge panel Screw (7.5 x 92 mm, pre-drill!) Construction beams (60 x 40 mm) Rubber pad (10 x 100 x 60 mm) for height compensation measuring 3/10/20 mm in thickness Concrete edge stone (50 x 1000 x 250 mm) (available from building material dealers) Gravel formation level with a 2% gradient (in longitudinal direction of the plank) Gravel formation level with a 2% gradient (in longitudinal direction of the plank) Gravel formation level with a 2% gradient (in longitudinal direction of the plank) Gravel formation level with a 2% gradient (in longitudinal direction of the plank) Note: FIX STEP boards cannot constitute a gradient of their own. Note: FIX STEP boards cannot constitute a gradient of their own. You shall find examples of use and the assembly instructions for locking clamp and the clip at: www.megawood.com/137 Assembly instructions ! Planning soſtware _Virtually create the terrace in your own garden via the app _Available as a download for tablets and smartphones Outdoor living, outdoor is megawood ® . CONSTRUCTION PLAN BASIS terrace system min. 2% gradient recomm. min. 2% gradient recomm. min. 2% gradient recomm. min. 2% gradient recomm.

Upload: others

Post on 27-Apr-2022

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Construction variants Installation heights Article

Planning principlesPreparation and sub-construction

• Preparethethegroundaroundallsides500mmlarger insizethantheterracedeckandwitha4%gradient.

• Createaweight-bearingandfrostproofgravel or crushed rock bedwitha2%inclineandscreedwithfinegravel (leveloutanyunevenness).

• Donotfillinanycavitiesbetweentheconstructionbeam, theconcreteedgestoneandthebaseoftheFixSteP!

• Avoidsoilcontact!(exception:itemsfromtheconstruction plankrange)!

• Laythesubstructuresysteminaccordancewiththeconstruction plan!

Floorboard assembly• Differencesinthefloorboardsareintendedandunderline thenaturalwoodlook.

• Mixthefloorboardsbeforelayingtheminordertosupport theeffect.

• Observethelayingdirection(refertothearrowinthe floorboardgrooveoronthelabel)!

• Donotexceedthemax.50mmfloorboardprotrusionover thesub-structure!

• Assemblyandproduction-relateddimensiontolerances regardingthelength,widthandthicknessaretobetaken intoaccountandchecked!

• Cuttingthelongitudinalsideofthefloorboardsmayresult infloorboardoffset.

w w w . m e g a w o o d . c o m

ImPRINTPublisher:NOVO-teCHtradingGmbH&Co.KG,

Siemensstraße31,06449Aschersleben,Germany

Conception/design/layout:toolboxx-media,Magdeburg,Germany

Picturecredits:ChristianWolf,Aschersleben,Germany

Subjecttochange.Coloursandgraphicsmaydifferdue

toprintingprocesses.

Date: 1. edition 2020 EN / 31.01.2020

YOUR SUPPlIER

• themegawood®constructionplanformsthebasisforallofthe layingvariations!Nowarrantyisprovidedintheeventofdeviations beingmadefromtheconstructionplanorshoulditemsbeused otherthanoriginalmegawood®items!

• Laytheterracefloorboardsinalongitudinaldirectionwithan adequategradientinordertoensurethatwaterisalwaysable todrainofffromthedeck,thisconformswiththeprinciples ofstructuralwoodpreservation.theriskofwaterstains, waterloggingandbuildupoforganicsubstancesisreducedby adheringtothis.

• Applicationsthatrequirebuildingapprovalaretobeprovidedwith astaticallysufficientlydimensioned,supportingandfall-through proofsub-structureasasupportformegawood®barefootboards orsubstructures/constructionplanks.

• Amin.gradientof2%isrecommendedfordecksuperstructures withanopengap.Amin.gradientof2%isabsolutelynecessary fordecksuperstructureswithaclosedgap.

• ensuresufficientventilationfrombeneathandtherear,e.g. withthemegawood®ventilationgrid.

• Avoidwaterloggingbyusingadrainagesystemthatis adequatelydimensioned!

• ensureanunrestrainedexpansionoftheterracedeck(min. distanceof20mmbetweenthefloorboardsandsolidcomponents)!

• Alwayspre-drillallholessothatthepartthatistobefixedis 2mmlargerthanthescrewdiameterandtheretainingdrill holeis0.5mmsmallerthanthescrewdiameter!

• Alldimensionsaretobecheckedonsite

• Coordinationwiththemanufacturermusttakeplaceand respectiveapprovalmustbeobtainedintheeventofspecial structuresthatdeviatefromthisconstructionplanorthe onlineplannerinorderforanypotentialwarrantyclaimstobe accepted.

• thethermalcharacteristicsofthematerialthatthecorresponding articleismadeofistobetakenintoaccount(recommended layingtemperature5°-25°C)whenusingtheP5jointprofile.• Whenbuildingtheterrace,thewindloadmustbetakenintocon siderationasaliftingloadintheconstruction.

General information

Youshouldcoveryourterraceinshadewhenitisexposedtointense

sunlightduringhotsummertemperatures.thisparticularlyprotectsthe

sensitivefeetofchildrenagainsthotsurfaces.inadditionitpreventsskin

damagecausedbyexcessiveUVrays.Aconsciouseffortintermsofprotec-

tingagainstthesevereimpactsoftheSunensuresacarefreebarefoot

experience.

Online Plannerthisbasicconstructionplanexplainsthestandardstructureversionsforrectangulardeckswhenlayinginthelongitudinaldirection.Specialstyles,mitrecuts,bracesanddiagonallayingareillustratedindividuallyinour“megaplaner“.www.megawood.com/108

NEW

CONSTRUCTION WOOD ROUND | SQUARE | OCTAGONAl | OVAlØ 90 mm | 90 x 90 mm | 90 x 90 mm | 90 x 60 mmL:360 cm

CONSTRUCTION WOOD

LAVABROWN

BASALtGReY

NAtURALBROWN

NUtBROWN SLAteGReY

iNGWeR

SeLGRiS

LORBeeR

megalite lIGHT SYSTEm

lED SPOT mINI/mAXIØ34 mm(0.25 W,10 lm)Ø60 mm(0.5 W,28 lm)24VDCiP67Stainlesssteel

lED lINEAR lIGHTSH:21 mm;B:62 mmL:3,600 mm(27 W,729 lm)4,800 mm(36 W,972 lm)6,000 mm(45 W,1215 lm)27 lm/W;24VDCiP65Aluminium/plastic

installlampsatamax.distanceof50mmfromaconstructionbeam.Layanadditionalbeamifnecessary.Note:thelightsareequippedwithLeDlampsfromenergyclassesA++toA.thelampsinstalledinthelightscannotbereplaced.

FurtherinformationregardingtheinstallationofmegaliteLeDspotlightscanbefoundhere:www.megawood.com/121

POSTSROUND | SQUARE | OCTAGONAl | OVAlØ 90 mm | 90 x 90 mm | 90 x 90 mm | 90 x 60 mmL:220|270 cm

TRANSOm40 x 112 mm90 x 60 mmL:178,6 cm

lImES FENCING SYSTEm

PANEl AUGUSTA (wavy)270 x 35 mmL:160,2|210 cm

PANEl COlONIA (smooth)239 x 6 mmL:158,4|210 cm

CONNECTING SPACER38 x 30 mmL:156,6|178,6190 cm

FENCE SETSTAINlESS STEEl BARPanel Augusta (wavy)Upto10 %inclinewithoutdiagonalcuttothepanel

CONSTRUCTION PlANK 40 x 112 mm|L:360 cm40 x 145 mm|L:420 cm

RHOmBUS PROFIlE 20.5 x 81 mm|L:420 cm

Attractivewoodcladdingcanbeobtainedusingthenewrhombusprofile.itisalsopossibletoscrewitonvisiblyoryoucanalsouseaclipsothatitisconcealed.

VARiAGReY VARiACHOCOLAteBLACK

YouwillfindtheentireitemsummaryfortheLimesfencingsystemhere:www.megawood.com/129

min

. 17

1 m

m

min

. 121

mm

Locking clamp

Screw (7.5 x 132 mm, pre-drill!)

construction beams (90 x 90 mm)

Rubber pad (10 x 100 x 60 mm)for height compensation measuring 3/10/20 mm in thickness

concrete edge stone (50 x 1000 x 250 mm) (available from building material dealers)

93

mm

104

mm

116

mm

127

mm

139

mm

143

mm

154

mm

166

mm

177

mm

189

mm

construction beams (40 x 60 mm)

Standard mounting

Standard panel

construction beams (40 x 60 mm)

attachment

comfort pad

Standard mounting

Standard panel

Two construction beams (40 x 60 mm)

Two attachments

Two comfort pads

dUo mounting dUo edge panel

CONSTRUCTION BEAmS90x90mm|L:360cm

CONSTRUCTION BEAmS40x60mm|L:360cm

SUB-CONSTRUCTION SCREW 40/607,5x92mm,incl.tx30andSDSdrill(Ø6.5mm)

SUB-CONSTRUCTION SCREW 90/907,5x132mm,incl.tx30andSDSdrill(Ø6.5mm)

CONNECTING ClIP forconstructionbeams28x 76 mmL:360 cm

GROOVE STRIP (onaroll)21mm|L:25/100mforclosedgapfor(CLASSiC,PReMiUM,PReMiUMPLUS)

Open gapwithoutgroovestrip

FIX STEP basis sub-structure

HOUSE CONNECTION PROFIlE 21mm|L:400cmsilver/bronze/anthracite

Basis concrete edge stone sub-structure

GROOVE BRIDGE 55x8x10mm,forfasteningthelockingclamponaconstructionbeamgap

CONNECTING ClIP forconstructionbeams28x76mm|L:360cm

RUBBER PAD60x100mmthickness:3/10/20mm

HOUSE CONNECTION PROFIlE 21mm|L:400cmsilver/bronze/anthracite

FIX STEP DUO EDGE PANEl280x260x71 mm

FIX STEP DUO EDGE mOUNTING250x60x55 mm

FIX STEP STANDARD PANEl270x 180x71 mm

FIX STEP STANDARD mOUNTING116x60x55 mm

ASSEmBlY ClIP78x40x20 mm

CONSTRUCTION BEAmS40x60 mm|L:360 cm

FASTENING SCREW m8 x80 forsmoothedgeboard,completewithnutandwasher

FIX STEP ATTACHmENT79x58x83mm

FIX STEP COmFORT PAD forfootstepcushioning

FIX STEP comfort sub-structure (raised)

Closed gapwithgroovestrip/P5gapprofile–raisedconstructionensurestherequiredventilation

Raised concrete edge stone sub-structure

SPACERassemblyaidforsettingthefloorboardgaps(approx.5mm/approx.8mm)

RETAINING BANDL:10m(onaroll),self-adhesive

FASTENING SCREW m8 x80 forsmoothedgeboard,completewithnutandwasher

SPACERassemblyaidforsettingthefloorboardgaps(approx.5mm/approx.8mm)

groove strip with clip

Construction variants Installation heights Article overview Supplementary products

Deck coveringPREmIUm PlUS

BAREFOOTBOARD21 x 242mm

L:360/420/480/540/600 cm

25 x 293 mm

L:360/420/480/540/600 cm

ClASSIC

SmOOTH EDGE BOARD17 x 72mm|L:360 cm

SIGNUm

BAREFOOTBOARD 21 x 145 mm

L:300/360/420/480/540/600 cm

21 x 242mm(Jumbo)

L:420/480/600 cm

293 mm 5 mm

DYNUm

SmOOTH EDGE BOARD17 x 72mm|L:360 cm

BAREFOOTBOARD 21 x 145 mm

L:300/360/420/480/540/600 cm

21 x 242 mm(Jumbo)

L:300/360/420/480/540/600 cm

SmOOTH EDGE BOARD17 x 72mm|L:360 cm

GROOVE BRIDGE 55x8x10mm,forfasteningthelockingclamponaconstructionbeamgap

RETAINING BANDL:10m(self-adhesive)

m6 x 16 FASTENING SCREW forperforatedtape,completewithnutandwasher

SCREW SET4x35mm

FIX STEP PERFORATED TAPEL:10m(onaroll)

FIX STEP RUBBER PAD 300x300mm,thickness:3/5/10mm

SECURING ClAmP andEDGE ClAmPincl.screws(4 x 35 mm),Bittx20

GROOVE STRIP (onaroll)21mm|L:25/100mforclosedgap(CLASSiC,PReMiUM,PReMiUMPLUS)

Combinationfloorboard,finelycorrugatedononeside,groovedandbrushedsurfaceontheother,8mmgap

Single-sided,textured,polishedsurfacewithcolourgradient,5mmgap

Oscillatingplanedsurface,brushedunderside,8mmgap texturedononeside,oscillatingbrushed,polishedsurface,5mmgap

PREmIUm

BAREFOOTBOARD21 x 145 mm

L:300/360/420/480/540/600 cm

21 x 242 mm(Jumbo)

L:420/480/600 cm

SmOOTH EDGE BOARD17 x 72 mm|L:360 cm

Oscillatingplanedsurface,brushedunderside,8mmgap

connecting clip

SmOOTH EDGE BOARD17 x 72mm|L:360 cm

COlOURSNUtBROWN

NAtURALBROWN

BASALtGReY

LAVABROWN

SLAteGReY

NUtBROWN NAtURALBROWN BASALtGReY LAVABROWN SLAteGReY MUSKAt tONKA CARDAMOM NiGeLLA VARiABROWN VARiAGReY VARiACHOCOLAteBLACK

COlOURSMUSKAt

tONKA

COlOURSNAtURALBROWN

NUtBROWN

BASALtGReY

COlOURSLAVABROWN

SLAteGReY

COlOURSNiGeLLA

CARDAMOM

320 mm

70 mm

10 mm gap

10 mm gap

Closed gap withgroovestrip/P5gapprofile–onlywitharaisedsuperstructureusinga90x90mmconstructionbeam

Open gap withoutgroovestrip/P5gapprofile

Standard panel Edge panel

Standard panel Edge panel

242 mm 242 mm5 mm

145 mm 145 mm 5 mm5 mm 145 mm±0,5mm ±0,5mm

±0,5mm ±0,5mm

BAREFOOTBOARD21 x 145 mm

L:300/360/420/480/540/600 cm

21 x 242 mm(Jumbo)

L:300/360/420/480/540/600cm

145 mm 145 mm 8 mm8 mm 145 mm

242 mm 242 mm8 mm

±0,5mm ±0,5mm

±0,5mm242 mm 242 mm8 mm

145 mm 145 mm 8 mm8 mm 145 mm±0,5mm ±0,5mm

±0,5mm

242 mm 242 mm

145 mm 145 mm 8 mm8 mm 145 mm

8 mm

±0,5mm ±0,5mm

±0,5mm

lOCKING ClAmP andlOCKING ClAmP EDGE

ZAmmER forthelockclipfastening

FASTENER FASTENER FASTENER

293 mm

242 mm 242 mm5 mm±0,5mm

ZAmmER forthelockclipfastening

ClIP andEDGE ClIPincl.screws(4x35mm),Bittx20

FASTENER FASTENER

ClASSIC VARIA

BAREFOOTBOARD 21 x 195 mm

L:420/480/600 cm

SmOOTH EDGE BOARD17 x 72 mm|L:360 cm

Partially-groovedsurfaceononesidewithcolourgradient,5mmgap

COlOURSVARiACHOCOLAteBLACK

VARiABROWN

VARiAGReY

195 mm 195 mm 5 mm5 mm 195 mm±0,5mm ±0,5mm

FASTENER

P5 GAP PROFIlE Onaroll,forclosedCLASSiClongitudinalgap(Varia)

ROllER Zammerattachmentfortheretractionofthejointprofile

OR

OR

SECURING ClAmP andEDGE ClAmPincl.screws(4x35mm),Bittx20

lOCKING ClAmP andlOCKING ClAmP EDGE

ClIP andEDGE ClIPincl.screws(4x35mm),Bittx20

OR

OR

P5 GAP PROFIlE Onaroll,forclosedCLASSiClongitudinalgap(Varia)

DISTANZ FIXSpacerforfront-endjoints(whenlayinginapattern)

DISTANZ FIXSpacerforfront-endjoints(whenlayinginapattern)

Two construction beams (40 x60 mm)

dUo mounting

dUo edge panel

Screw (7.5 x 92 mm, pre-drill!)

construction beams (60 x 40 mm)

Rubber pad (10 x 100 x 60 mm)for height compensation measuring 3/10/20 mm in thickness concrete edge stone (50 x 1000 x 250 mm) (available from building material dealers)

gravel formation level with a 2% gradient (in longitudinal direction of the plank)

gravel formation level with a 2% gradient (in longitudinal direction of the plank)

gravel formation level with a 2% gradient (in longitudinal direction of the plank)

gravel formation level with a 2% gradient (in longitudinal direction of the plank)

Note: FIX STeP boards cannot constitute a gradient of their own.

Note: FIX STeP boards cannot constitute a gradient of their own.

Youshallfindexamplesofuseandtheassemblyinstructionsforlockingclampandtheclipat:www.megawood.com/137

Assembly instructions

!

Planning software

_Virtually create the terrace in your own garden via the app

_available as a download for tablets and smartphones

outdoor living,outdoor is megawood®.

CONSTRUCTION PlAN BASISterracesystem

min. 2%gradient recomm.

min. 2%gradient recomm.

min. 2%gradient recomm.

min. 2%gradient recomm.

Page 2: Construction variants Installation heights Article

min. 121 mm

min. 171 mm

7a

AttachtheFixStepfixturescentrallyusingastripofretainingband,clickintothepanelsandposition,ensuretheheightadjustmentisidentical.PositiontheFixStePDUOedgepanelsatthestartoftheterrace,distributetheFixStePstandardfixturesinaparallelmanner–pay attention to distances.PositionfurtherFixStePDUOedgepanelsattheendoftheterrace.ifrequired,turntheexternalFixStePpanelsinordertopreventaprotrusionoftheconstructionbeams.

intheeventofterracelengthsabove3.6m,positionFixStePDUOsmoothedgeboardsintheareaofthesmoothedgeboardbuttjoint.

Withthesmoothsidefacingupwards,clicktheconstructionbeams(40x60mm)intotheFixStePfixtures.

iftheterracewidthisgreaterthan3.6m,alwaysarrangetheconstructionbeamjointsinanoffsetmanner.Cuttheconnectingclipto320mm,connectthebeamjointswiththisclipandthentightlyscrewononeside.Positionthesmoothedgeboardsandconstructionbeamjointsinthesamelocation.Recesstheconnectingclipmeasuring20mminwidthand10mmindepthinordertoassemblethesmoothedgeboardintheareaofthescrewconnectionatalaterdate.align the construction beams exactly. ClOSED GAP intheeventofadoublesmoothedgeboard,assembleconstructionbeam unitsmeasuring80mminlengthontoeachconnectingclipusingscrews.

Positionperforatedtapebeneaththeconstructionbeamsandscrewontoallconstructionbeamsusinganassemblyclip.

Sawintotheconstructionbeam,lockthelockingclampedgeinthegroove.

Adheretheretainingbandtotheconstructionbeamlocatedcentrallybeneaththefloorboards.

insertthefirstfloorboardintothehouseconnectionprofile(optional)andthenpushintothepositionededgeclamps. OPEN GAP Placethelockingclampsontheconstructionbeam,lockinplace withthezammer/pliersandinsertitintothefloorboardgroove. Applythenextfloorboard,useaspacer(for5/8mmgap)ifnecessary ClOSED GAP Placethelockingclampsontheconstructionbeamandlockinplace withthezammer/pliers.Placethegroovestripontothefully assembledlockingclampand,together,pushintothefloorboardgroove.

ifthereisagrooveintheconstructionbeam,itmaybenecessarytouseagroovebridgeinordertoalsobeabletosecurelyfastenthelockingclampinthegaparea.

takeintermediatemeasurementsaftermax.1moflaidfloorboardrowsandscrewthecorrespondinglockingclamprowontotheconstructionbeam.

Cuttheconstructionbeamstosizeandensuretheyareflush – repeat step 6.

Cutthefrontalsideofthefloorboardstosizewitha15mmprotrusion,chamferthecuttingedge.thefrontalsideofthesmoothedgeboardsmustbe12mmshorterthantheconstructionbeamsattheendoftheterrace–pay attention to distances. OPEN GAP Frontalsideandlongitudinalsideassemblyofthesmoothedgeboards. ClOSED GAP Assembleconstructionbeamunitsmeasuring80mminlengthcom- pletewithassemblyclipatthestartandendofeachconstructionbeam. Screwdoublepiecesontotheterracecornersusingtwoassembly clips,indenttheDUOpanelwherenecessary. Frontalsideandlongitudinalsideassemblyofthesmoothedge boards.

OPEN GAP Layconcreteedgestones(1,000x250x50mm)atacentredistanceof 650mmonthegravelbedwithgradient,turnthefrontalsideinwardsby 50mminthedirectionoftheconstructionbeams.

ClOSED GAP Layconcreteedgestones(100x25x5cm)atacentredistanceof 750mmonthegravelbedwithgradient,turnthefrontalsideinwardsby 100mminthedirectionoftheconstructionbeams. OPEN GAP evenlydistributetheconstructionbeams(40x60mm)transverselyto theconcreteedgestones(grooveatthebottom),payattentiontoa 50mmprotrusion. ClOSED GAP evenlydistributetheconstructionbeams(90x90mm)transverselyto theconcreteedgestones,payattentiontoa100mmprotrusion.

Arrangetwobeamsrespectivelyatthestartandtheend.Lay10mmrubberpadsbeneaththeconstructionbeams,compensateforpossiblegradientdifferencesusingfurtherrubberpads.intheeventofaterracewidthgreaterthan3.6m,alwaysarrangetheconstruc-tionbeamjointsinanoffsetmanner(distanceof10mm).intheeventoftheterracebeinglongerthan3.6m,mountadditionalconstructionplankpiecesinthebuttjointsofthesmoothedgeboards. OPEN GAP Cuttheconnectingclipto320mm,connectthebeamjointswiththis clipandthentightlyscrewononeside. Screwtheendsoftheconstructionbeamsthroughouttheentireedge area.Screwthetwoouteraswellasthecentralconstructionbeams witheverysecondconcreteedgestone.Cuttheconstructionbeams tosize,ensuringtheyareflush. Sawintotheconstructionbeam,lockthelockingclampedgeinthegroove. ClOSED GAP Aligntheconstructionbeams,screwthesub-constructionintheedge areaaswellasbothstartandendbeamstothemiddlebeam.Cutthe constructionbeamstosize,ensuringtheyareflush,10cmprotrusion. the120mmlongconstructionbeamsmeasuring60x40cmareplaced uprightandthenfastenedtotheendsoftheconstructionbeamsonthe leftandrighthandsides.Adheretheretainingbandtotheconstructionbeamlocatedcentrallybeneaththefloorboards.

OPEN GAP insertthefirstfloorboardinthehouseconnectionprofile(optional), thenpressitintothepositionededgeclamps.Placethelocking clampsontheconstructionbeam,lockinplaceusingthezammer/ pliers,insertintothefloorboardgroove. Applythenextfloorboard,useaspacer(for5/8mmgap)ifnecessary. ifthereisagrooveintheconstructionbeam,itmaybenecessaryto useagroovebridgeinordertoalsobeabletosecurelyfastenthe lockingclampinthegaparea. takeintermediatemeasurementsaftermax.1moflaidfloorboar rowsandscrewthecorrespondinglockingclamprowontothecons- tructionbeam.Repeatuntilyoureachthelastfloorboardbutone. ClOSED GAP Screwtheedgeclipontotheendoftheconstructionbeamsothatit isflushwithit. Followingassemblyofthefirstfloorboards,pushthehouseconnection profileasaborderstriptothehousefacadetotheendoftheflorboard (optional).Fixthefloorboardswithaclip.tightenthescrewinsucha mannerthattheclipisparalleltothesub-construction. Looselyinsertthegroovestripintothefloorboardgroove,applythenext floorboard,pushontothegroovestrip,fixthefloorboardusingtheclip. Repeattheprocessuntiltheterraceisfullylaid. Cutthefloorboardstosizeintheedgeareafacingtheconstruction beams,chamferthecuttingedge.SeeFiguresand

thefrontalsideofthesmoothedgeboardsmustbe12mmshorterthantheconstructionbeamsattheendoftheterrace–pay attention to distances.

Circumferentiallyfastensmoothedgeboardstothesub-construction.Onthefrontalside,screwthesmoothedgeboardtothesub-constructionbeams.

Screwevery50cminaparallelmanneralongtheconstructionbeams,applyspacerscrewsbetweenthesmoothedgeboardandtheconstructionbeam.

SUB-

CO

NST

RUC

TIO

NFl

OO

RBO

ARD

ASS

EmBl

YSm

OO

TH E

DG

E BO

ARD

SSU

B-C

ON

STRU

CTI

ON

FlO

ORB

OA

RD A

SSEm

BlY

SmO

OTH

ED

GE

BO

ARD

S

4x35

10 mm

40 mm

15 mm

min. 15 mm

10 mm

40 mm

15 mm

min. 15 mm

10 mm

12 mm

2%

15b

4b

2%

Water drainage

construction plan with FIX STeP

construction plan with concrete edge stone

15a

15a

4

open gap

YouwillfindadditionalinstructionsonthelayingofaFixStePterracehere:www.megawood.com/124

Youwillfindadditionalinstructionsontheconstructionofaterracewithasubstructureofstoneswww.megawood.com/125

9b

15 mm12

0 m

m

100 mm

2b

12 mm

80 mm

8

1311

60 mm

12 mm

14 10 mm

40 mm

15a

Terrace widthTerrace length

15b

40 mm

15 mm

min. 15 mm

8b 10 mm

40 mm

9a 10 mm

15 mm

40 mm

min. 15 mm

9b8a

10 mm

320 mm 70 mm

7,5x92

3a

3b10 mm

7,5x132

10 mm

32

0 m

m

2 31

50 mm

2a

10 mm

40 mm

15b

40 mm

60 mm

10 mm

4x35

10 mm

12 mm

6

l: 320 mm

4 70 mm

5b

5a

7a 7b

60 mm

12 mm 12 mm

4x35

4b

closed gap

open gap

4x35

11

7b

10 mm10 mm

m8x 80

mind. 15 mm 10 mm

min. 15 mm10 mm

closed gap

9a

Soil formation

80 mm

m8x 80

m8x 80

m8x 80

9a 9b

10

8

12

710

11

5

1a

1b

2a

2b

3a

3b

4

4

5a

5b

2

2

9a

9b

8a

8b

7

8

1

2

3

6

7

8

10

11

13

12

4

14

15a

14

14

4

9

57

••

5

9

9b

9a

15b

15

4b

5

6

1a

1b

1

2a

2b

2

3a

3

3b

5a

5b

10

12

••

3

max. 500 mm

180 mm

4 %

2%

max. 500 mmmax. 500 mm

max. 650 mm

2%

max. 500 mm max. 500 mm

max. 600 mm

210 mm

max. 650 mm

max. 650 mm

max. 750 mm

min. 93 mm

min. 143 mm

min. 2%recomm. gradient

min. 2%recomm. gradient

min. 2%gradient required

min. 2%gradient required

Care and cleaningcare instructions

Naturalfibreinclusionpriortotreatment

Naturalfibreinclusionfollowingmechanicaltreatment

Amin.2%gradientmakescareandcleaningeasier.ifthegradientisnotobserved,thismayleadtotheformationofwaterstainsandorganicsubstancesarethenabletosettleandahigherdegreeofsoilingisthenprobable.Werecommendcleaningtheterraceatleasttwiceperyearattemperaturesofatleast15°Candtoproceedasfollows:

•Brushdry,loosedirtfromtheterracedeck.

•Sufficientlywatertheentireterracedeck.

•Allowthewatertotakeaffectforatleast15minutes.

•Cleantheterracedeckusingwater,astiffbrushorascrubberandthoroughlyrinse.

Ournewmegawood®scouringpowder–removesdirt,whichcannotberemovedwithwaterandbrushesonly.itisalsosuitableforthesurfacecleaningofmegawood®terraces.

Waterstainsmayforminthetransitionalareabetweencoveredanduncoveredareasasaresultofprecipitationandenvironmentally-relateddustparticles.thesestainscangenerallyberemovedusingwaterandascrubberanddonotrepresentcauseforcomplaint.theeffectofthewaterstainslessensintimebutcannotbeentirelyavoided.

Youwillfindadditionalcareinstructionsintheterracepassinthedownloadareaofourwebsite: www.megawood.com/downloads

Forrawmaterialreasons,smallinclusionsofnaturalfibresmayoccur.Afterbeingsubjectedtoweathering,theymayrisetothesurfaceasaresultofwaterabsorption.Amaximumamountof0.03%ofthesurfacemaybeaffected.theparticlesizemaynotexceed0.5cm2.themajorityoftheparticleswilldisappearovertimeasaresultofterraceuse.

theycanalsobemechanicallyremoved.theproductwillnotbedamagedasaresult.BasedupontheePLF(europeanProducersofLaminateFlooring),theparticlesthatarevisiblefromstandingeye-levelunderverticalincidenceoflightareusedforassessmentpurposes.

Inclusion of fibres

Wateredges

Aftercleaningwithwater

Learnmoreonthecareforandcleaningofourproducts.www.megawood.com/123

colour maturation

CLASSiC

PReMiUM PReMiUMPLUS SiGNUM DYNUM

TOP:AFteRLAYiNG

mIDDlE:AFteR1–2MONtHS

BOTTOm:AFteR6–8MONtHS

Special features

!

Ourinstallationguideforthestructurewithcrossbracingcanbefoundunder:www.megawood.com/137

min. 2%gradient recomm.

• Doublesub-constructionalongthe45° section.

• insertsealingtapeintothemitrejointon bothsides.

• Onlypushthefloorboardintothemitre profileby10mminordertoensurethe expansion.

• Whenattachingshortfloorboardsections (thatcanbefastendtotheloweredgewith lessthan3lockclampsorclips)onthe diagonalormitrecut,thesectionsare screwedtotheconstructionbeamfrom above.(M6x40mmscrew)

laying on mitres for l, U, O-shaped terraces

20 mm

m6 x40

• theterracedeckisconstructedata deeperlevelsothestructureformsa singlelevelwiththesurroundingground surface.

• Amin.distanceof40mmbetweenthe constructionbeamsandrising,solid componentsmustalwaysbeobserved.

Construction at floor level with ventialtion grille

Clipmitre profile

Compress ribbon

laying on roof terraces• Heightadjustmentandtheensuring ofamin.gradientof2%bylaying theFixStePboardsinabedof levellingmortar.

levelling mortar

mITRE PROFIlEAluminium21mmL:4 m

COmPRESS RIBBONexpandsupto20mmL:13m (onaroll)

ClIP & EDGE ClIPincl.screws(4x35mm),Bittx20

SCREW m6 X 40attachingshortfloorboarssections

• Adistanceofatleast20mmbetween theboardsandraised,fixedcomponents mustalwaysbemaintained.

• ensurethattheleveldeckisdesignedwith aopengapinordertoensureventilation frombeneathandfromtherear.

• Onlyimplementalevelfloorboard

mind. 2%

recomm. gradient

VENTIlATION GRIllEH:21mm;B:105mmL:2.000mmStainlesssteelV2Abrushed

Furtherinformationregardingroofterraceconstructionorotherspecialconstructionmethodsareavailabledirectlyfromthemanufacturerandwww.megawood.com

structurewitha5mminconjunctionwith aventilationgrid.

• Useoftheventilationgrid(alsowith „placed-on“deckorintheeventofa closedgap)inordertoimprovetheair circulationbeneaththeterraceandto increasetheservicelifeoftheentiredeck.

laying as a deck with herringbone pattern

Gradient in the laying direction

4%

2%

max. 50 cm

Herringbone pattern

2%Recommended gradient

Soil formation level

Gravel formation level

• Anadditionaldoublesub-constructionis tobelaidinallareaswheretherearebutt jointsontheheadside.

• theDiStANZFixispositionedbetween thedoubleloweredgesinordertoforma gapbetweenthebuttjointsonthehead side.

DISTANZ FIX

Cross bracing structure • Prerequisiteforthecrossbracingis aload-bearingsubstrate(concrete, concretekerbstone)ortheinstalla- tionwithFixSteP.Whenlaidwithout FixSteP,thestructureisbuilton20mm highrubberpads,whichareinstalled atthecrossingpointsoftheconstruc- tionbeamstoensuretheminimum distance.

• thecrossbracingmustbesecurely connectedtothesubstrate.• thegeneralplanningprinciplesofmegawood®constructionplanterrace systemapply.

Constructioninformationandinformationregardingtheventilationgridisavailableatwww.megawood.com/136

Constructioninformationandinformationregardingtheventilationgridisavailableatwww.megawood.com/136

NAtURALBROWN LAVABROWNBASALtGReY SLAteGReYNUtBROWN VARiAGReYVARiABROWN VARiACHOCOLAteBLACK

tONKAMUSKAt NiGeLLACARDAMOMNAtURALBROWN LAVABROWNBASALtGReY SLAteGReYNUtBROWN