contour trl microlaserpeel profractional...
TRANSCRIPT
Contour TRL™ with MicroLaserPeel®
& ProFractional™ TherapyComplete Resurfacing Solutions from Sciton
Laser resurfacing has emerged as the most effective way to treat a wide variety of skin conditions. Resurfacing eliminates old, damaged skin, which is replaced with fresh, healthy skin. Some lasers deliver their energy over the entire surface area of a treatment site (which may be optimal for certain types of conditions). Other lasers deliver “fractional” energy to just a portion of the skin (which may be optimal for a different set of conditions). With a Sciton JOULE TM, you can have it all.
“SAFE On ALL SKIn TyPES”
Why add Sciton resurfacing to your practice?
The Most Complete Resurfacing Product Line
ProFractional TherapyTM – A minimal downtime
treatment that creates micro-ablated channels deep
into dermal tissue (to treat a variety of pathologies and
stimulate new collagen growth), surrounded by islands
of untreated skin (to promote rapid healing)
MicroLaserPeel ® – A minimal downtime, light
resurfacing treatment limited to the epidermis that
evens out skin tone, texture & color, and restores a
healthy-looking, youthful glow to the skin
Deep Resurfacing – A more aggressive
procedure that literally erases wrinkles, pigmented
lesions and other skin irregularities in the
epidermis and dermis
•Scitonresurfacingtechnologyissaferyet moreeffectivethanCO2laserswithless downtime
•Itopensthedoortomanymorepatientsand willhelpyouturnmoreconsultationsinto customers
•Laserresurfacingisaveryhighprofit-margin procedurewhichisquicktoperform,yet producesamazingresults
•Itwillimprovetheoutcomesoffacialplastic surgerybytargetingthecentralpartofthe face,improvingskincolor&texture,and eliminatingperi-oral/peri-orbitalwrinkles
•Happypatientsarelikewalkingadvertisements; theirgreatresultsareobviousandoftenlead toreferralsof
Before & After Clinical Results
Pho
tos
cour
tesy
of T
odd
Bes
sing
er, M
D, P
hD
®
ProFractional™
1st Treatment: 200 μm ablation, 6.5% density2nd Treatment: 300 μm ablation, 6.5% density3rd Treatment: 450 μm ablation, 6.5% density
©20
09 S
cito
n, In
c. A
ll rig
hts
rese
rved
. 260
0-03
3-26
Rev
. A B
&A
PF
BEFORE / AFTER | 3 tx | courtesy of Todd Bessinger, MD, PhD ®
ProFractional™
1st Treatment: 200 μm ablation, 6.5% density2nd Treatment: 300 μm ablation, 6.5% density3rd Treatment: 450 μm ablation, 6.5% density
©20
09 S
cito
n, In
c. A
ll rig
hts
rese
rved
. 260
0-03
3-26
Rev
. A B
&A
PF
BEFORE / AFTER | 3 tx | courtesy of Todd Bessinger, MD, PhD
TEXTURE&PIGMENT
Before After 3 tx, 200-400 µm ablation
Pho
tos
cour
tesy
of R
. Jam
es K
och,
MD
®
ProFractional™
Parameters: 300 μm ablation
©20
09 S
cito
n, In
c. A
ll rig
hts
rese
rved
. 260
0-03
3-35
Rev
. A B
&A
PF
BEFORE / AFTER | Three weeks post 2 tx | courtesy of R. James Koch, MD ®
ProFractional™
Parameters: 300 μm ablation
©20
09 S
cito
n, In
c. A
ll rig
hts
rese
rved
. 260
0-03
3-35
Rev
. A B
&A
PF
BEFORE / AFTER | Three weeks post 2 tx | courtesy of R. James Koch, MD
ACTINICKERATOSIS
Before After 2 tx, 200 µm ablation
ProFractionalTM Therapy
Pho
tos
cour
tesy
of J
ason
Poz
ner,
MD
, FA
CS
®
MicroLaserPeel™
©20
09 S
cito
n, In
c. A
ll rig
hts
rese
rved
. 260
0-03
3-22
Rev
. A B
&A
MLP
BEFORE / AFTER | Five months post 1 tx | courtesy of Jason Pozner, MD, FACS ®
MicroLaserPeel™©
2009
Sci
ton,
Inc.
All
right
s re
serv
ed. 2
600-
033-
22 R
ev. A
B&
A M
LP
BEFORE / AFTER | Five months post 1 tx | courtesy of Jason Pozner, MD, FACS
SUNDAMAGE
Before After 1 Treatment
Pho
tos
cour
tesy
of B
ruce
Fre
eman
, MD
®
MicroLaserPeel®
©20
09 S
cito
n, In
c. A
ll rig
hts
rese
rved
. 260
0-03
3-21
Rev
. A B
&A
MLP
BEFORE / AFTER | 2 tx | courtesy of Bruce Freedman, MD ®
MicroLaserPeel®
©20
09 S
cito
n, In
c. A
ll rig
hts
rese
rved
. 260
0-03
3-21
Rev
. A B
&A
MLP
BEFORE / AFTER | 2 tx | courtesy of Bruce Freedman, MD
KERATOSIS
Before After 2 Treatments
MicroLaserPeel®
Pho
tos
cour
tesy
of J
. Dav
id H
olco
mb,
MD
®
Contour TRL™
Parameters: 50% overlap; 1st pass, 100 μm ablation, 0 μm coag; 2nd pass, 100 μm ablation, 50 μm coag; 3rd pass, 50 μm ablation, 50 μm coag
©20
09 S
cito
n, In
c. A
ll rig
hts
rese
rved
. 260
0-03
3-12
Rev
. A B
&A
TR
L
BEFORE / AFTER | 1 tx | courtesy of David J. Holcomb, MD ®
Contour TRL™
Parameters: 50% overlap; 1st pass, 100 μm ablation, 0 μm coag; 2nd pass, 100 μm ablation, 50 μm coag; 3rd pass, 50 μm ablation, 50 μm coag
©20
09 S
cito
n, In
c. A
ll rig
hts
rese
rved
. 260
0-03
3-12
Rev
. A B
&A
TR
L
BEFORE / AFTER | 1 tx | courtesy of David J. Holcomb, MD
SKINTONEANDTEXTURE
Before After 1 tx, 100 µm ablation
Pho
tos
cour
tesy
of L
ouis
W. A
post
olak
is, M
D
®
Contour™
Parameters: Face 240 μm ablation, 50s μm coag, 50% overlap Neck 70 μm ablation, 0 μm coag, 50% overlap Deeper Cheek Creases 360 μm ablation, 50 μm coag, 50% overlap
©20
09 S
cito
n, In
c. A
ll rig
hts
rese
rved
. 260
0-03
3-45
Rev
. A B
&A
Con
tour
BEFORE / AFTER | Four weeks post 1 tx | courtesy of Louis W. Apostolakis, MD ®
Contour™
Parameters: Face 240 μm ablation, 50s μm coag, 50% overlap Neck 70 μm ablation, 0 μm coag, 50% overlap Deeper Cheek Creases 360 μm ablation, 50 μm coag, 50% overlap
©20
09 S
cito
n, In
c. A
ll rig
hts
rese
rved
. 260
0-03
3-45
Rev
. A B
&A
Con
tour
BEFORE / AFTER | Four weeks post 1 tx | courtesy of Louis W. Apostolakis, MD
DEEPWRINKLESANDSKINTEXTURE
Before After 1 tx, 240-360 µm ablation
Deep Resurfacing
RobertAycock,MD, Pozner,MD,
Er:YAG
ProFractional Therapy with Tunable Thermal Zone
The Sciton TRL AdvantageHighly efficient ablation gives Sciton lasers the following advantages over the competition:
• More precise treatments• Safer on face and body• Treats more skin types• Shorter recovery times• Consistent, predictable results. Every time.
TRL (Tunable Resurfacing Laser) TechnologyThe world’s most sophisticated resurfacing technology enables:
• Independent control over ablation and thermal effects• “Turn off the heat” and deliver pure ablation• Very deep treatments with minimal risk of complications• Extremely precise ablation depth control
Emulation of other resurfacing technologiesTRL technology allows you to customize thermal effects
• Use no coagulation to emulate Er:yA G• Add a little coagulation to emulate Er:ySGG• Add a lot of coagulation to emulate C O2
• Individualize treatments for each patient’s needs
technologyscience
Pulse Width
Ener
gy
Pulse WidthPulse WidthPulse Width
No Coag Coag Level 1 Coag Level 2 Coag Level 3
Research has shown that the side effects common with CO2 lasers (hypopigmentation and prolonged erythema) are caused by thermally-induced inflammation and tissue necrosis. This will always be a concern for CO2 resurfacing technology because there is no way to separate the heat from the ablation.
Sciton resurfacing lasers are different. They are able to ablate with virtually no heat deposition because of extremely high energy absorption in water. The side effects common with other technologies are rarely observed with a Sciton laser, even in very deep treatments.
safety
Indications• Deep wrinkles, fine lines, peri-oral and peri-orbital rhytides
• Actinic keratosis
• Poor skin tone & texture
• Scar revision
Ablation Threshold
You can safely ablate as shallow or as deep as you wish with little thermal damage
A.JayBurns,MD,Michaels,
Er:YSGG CO2
ProFractional Therapy with Tunable Thermal Zone
High water ABSORPTION = High efficiency ABLATION & Precise CONTROL
Why is high water absorption important?
Wavelength (nm)
1000
0
Er:YAG(2940nm)
Er:YSGG(2790nm)
CO2(10600nm)
14000
Coe
ffici
ent
of a
bso
rptio
n (c
m-1)
12000
10000
8000
6000
4000
2000
1000
0
Superior water absorptionSciton’s Er:yAG wavelength at 2940 nm dominates the water absorption spectrum. It is absorbed by water 2.7 times stronger than Er:ySGG and 14.6 times stronger than CO2. Science cannot be denied. 2940 nm is the superior wavelength for maximum control in dermal resurfacing.
Emulation of other resurfacing technologiesTRL technology allows you to customize thermal effects
• Use no coagulation to emulate Er:yA G• Add a little coagulation to emulate Er:ySGG• Add a lot of coagulation to emulate C O2
• Individualize treatments for each patient’s needs
technologyscience
you can fine tune your treatments and patient downtime based on precise, user-selectable ablation depths.
efficacy
150 µm1000 µm
Sciton’s TRL laser energy impacts the skin and is immediately absorbed by water in epidermal and dermal tissue
Near 100% of the laser’s energy is consumed in tissue vaporization
Virtually no energy radiates into surrounding tissue
Popular Combinations
Sciton Combination TherapyThe Sciton JOULETM with TRLTM technology gives the physician far more treatment flexibility than any other laser. Combine procedures and fine tune ablation and thermal effects to give your patients the very best results, all in one session.
Some examples of popular combinations include:
MicroLaserPeel® (MLP®) + ProFractionalTM
Many practitioners now add MicroLaserPeels to all ProFractional treatments because the full coverage treatment of MLP makes the skin look healthier and more vibrant, while ProFractional targets conditions that exist deeper in the skin. The combined effect is superior cosmetic results with no additional downtime.
BBLTM (BroadBand Light) + ProFractionalTM
BBL is an intense pulsed light device (not a laser) available on the JOULE platform used to remove pigmented and vascular lesions, reduce acne, and remove hair. BBL works well with ProFractional Therapy and allows the physician to treat more conditions in the same session.
SkinTyteTM + ProFractionalTM
SkinTyte uses a broad spectrum of infrared light energy to deep-heat dermal tissue, leading to creation of a new collagen foundation and visible skin firming. Combining SkinTyte with ProFractional allows the physician to target collagen more broadly.
BBLTM + MicroLaserPeel® + ProFractionalTM
The attributes of these three treatments are unique and complementary, and are often used in combination to produce superior cosmetic results. With other laser and broadband light manufacturers, you have to purchase three separate systems to perform this combination. With Sciton, they are all available on one system – the JOULE.
ProFractional
ProFractional
ProFractional
JOULE Handpieces
ProFractionalMLP
BBL
SkinTyte
MLPBBL
Contour TRL(MicroLaserPeel & Deep Resurfacing)
Single Spot Handpiece
ProFractional & ProFractional-XC
4 mm 2 mm 0.5 mm
SkinTyte
BBL
+
+
+
+ +
20x20 mmscanned area
30x30 mmscanned area
925 Commercial Street, Palo Alto, California 94303
Phone: (888) 646 6999 • Email: [email protected]
www.sciton.com
©2010 Sciton, Inc. All rights reserved. Sciton is a registered trademark and JOULE is a trademark of Sciton, Inc. 2600-002-04 Rev. B
You would treat her with a Sciton Resurfacing laser.
Sciton JOULE™— Quite possibly the only aesthetic laser you ever need.
60 year old patient before treatment After ONE full face resurfacing treatment
Ph
oto
s co
urt
esy
of
Lo
uis
W. A
po
sto
lakis
, M
D
• Open the door to many more patients and increase your revenue.
• Target skin conditions not addressed by face lifts such as deep perioral/periorbitalrhytides and poor skin tone & texture.
• Augment your plastic surgery procedures to help you deliver the “home run”results your patients really want.