Control SB210Dual 10" Indoor/OutdoorHigh Output Compact Subwoofer

Key Features:� 2 x 250 mm (10 in.) Aluminum/

Ceramic Composite Cone Drivers

� 400 Watts Power Handling

� Fully Outdoor Capable Design

� SonicGuard™ Overload Protection

� 13 x M6 Suspension Inserts,Including Inserts for Optional U-Bracket

� AV Shielded

� Compact, Low Profile Design

The Control SB210 provides low fre-quency reinforcement for a wide vari-ety of sound system applications. Itscompact size, high output and outdoorcapable design makes it one of themost versatile subwoofers in the instal-lation market.

The internal angled baffle allows fora large port opening and compact frontdimensions without compromising dri-ver size. The SB210 produces warm,punchy low-end sound.

The Aluminum/Ceramic CompositeDiaphragm 10" Drivers are rated forpink noise power handling of 200Watts each, providing 400 Watts (1600 Watt peaks) of system powerhandling. The dual driver design alsoallows for stereo operation of theenclosure and provides great flexibilitywhen used with one of the optionalnetwork accessory kit. Choose theMTC-210-SAT network accessory todrive a full subwoofer/satellite systemwith one amplifier. The networkreceives a stereo or mono source, andsends a high-passed 4-Ohm or 8-OhmSatellite output signal for operationwith other Control loudspeakers. ATC-210T-SAT network can be used insame manner when using a 70.7/100-Volt distributed signal line.

Included with the SB210 are four feetand four receptacles to allow floor andshelf mounting as well as reliable stack-ing of multiple units. The thirteen M6insert points allow for installation usingforged shoulder eyebolts for suspend-ing the subwoofer. The Optional U-Bracket MTC-210UB allows for addi-tional versatility in mounting.

The High Impact PolyStyrene (HIPS)cabinet is available in black or white(SB210-WH) and is paintable. The ther-moset composite-coated grille standsup to UV as well as humidity anddirect exposure to water. The grille isbacked with a combination of materialsthat, while acoustically transparent, pre-vent the intrusion of water into thecabinet even when hit directly, such asfrom rain or a sprinkler.

Specifications:System:

Frequency Range (-10 dB): 42 Hz - 200 HzFrequency Response (-3 dB): 48 Hz - 120 Hz

Power Capacity1: 800 Watts Continuous Program Power400 Watts Continuous Pink Noise

Nominal Sensitivity2: 95 dB, 1W @ 1m in half-space (2� loading)Max SPL @ 1m3: 122 dB (in half-space)

Nominal Impedance: 8 OhmsMinimum Impedance: 7 Ohms at 100 Hz

Transducers:Low Frequency: 2 x 250 mm (10 in.) dia., 50 mm (2 in.) edge wound ribbon

voice coil, Aluminum/Ceramic Composite cone.Physical:

Enclosure Material: High Impact PolyStyrene (HIPS) w/internal 8 mmpolyurethane co-mold

Grille: Thermoset composite coated steel, multi-layerOverload Protection: SonicGuard™

Environmental: IEC 529 IP-X5 rating. Exceeds MilSpec 810 for humidity, saltspray, temperature & UV. Passes Mil-STd-202F for salt spray.

Termination: Screw-down terminal strip, zinc plated copper base, nickel-plated metal screws/washers. Accepts up to 9 mm outside, 4 mm inside open lug (#6, #8 or #10 lug), plus bare wire (upto 12 AWG/2.5mm2).

Colors: Black or white (-WH)Dimensions (H x W x D): 355 x 590 x 570 mm (14 x 23.3 x 22.5 in.)

Net Weight (ea): 17.1 kg (38 lb)Shipping Weight (ea): 19.4 kg (43 lb)Included Accessories: 1 pc MTC-PC4 input panel cover, 4 pcs MTC-210FT floor

standing foot, 4 pcs MTC-210RT foot receptacle for stacking.Optional Accessories: MTC-210UB U-Bracket

MTC-210-SAT stereo/mono high passing network with SatelliteoutputsMTC-210T mono network with transformers for 70.7/100Vdistributed line systems. Taps at 250W, 125W, 62W (plus 31Wfor 70.7V only).MTC-210T-SAT stereo/mono high passing network withSatellite outputs and transformers for 70.7/100-Volt distributedline systems. Taps at 125W, 62W, 31W (plus 15W for 70.7Vonly).

1 Continuous Pink Noise rating is IEC-shaped pink noise with a 6 dB crest factor for 100 hours continuously.Continuous program power is defined as 3 dB above the Continuous Pink Noise Rating and is a conservative expres-sion of the system’s ability to handle normal speech and music program material.

2 Half-space, averaged 60 Hz to 80 Hz3 Calculated from sensitivity and power handling. Power compression is not considered.

JBL continually engages in research related to product improvement. Some materials, production methods and designrefinements are introduced into existing products without notice as a routine expression of that philosophy. For this rea-son, any current JBL product may differ in some respect from its published description, but will always equal or exceedthe original design specifications unless otherwise stated.

SS SB210CRP 10M05/04

� Control SB210 Dual 10" Indoor/Outdoor High Output Compact Subwoofer

Dimensions

SIDE

Dimensions in inches [mm]

23.3�[590]

14.0�[355]

22.5 �[570]

TOP

FRONT

Control SB210 frequency response, (1W, 1m) at two-boundary junction(π loading, dotted line) and at three-boundary junction (π/2 loading,solid) with recommended band-limiting filters (30 Hz high-pass 2ndorder Butterworth, and 120 Hz low-pass 2nd order Butterworth).

JBL Professional8500 Balboa Boulevard, P.O. Box 2200Northridge, California 91329 U.S.A.

© Copyright 2004 JBL Professional

A Harman International Company