core drilling machines and accessories. principles of drilling w.a.s.p. water anchor speed power...
TRANSCRIPT
CORE CORE DRILLING DRILLING MACHINES MACHINES AND AND ACCESSORIESACCESSORIES
CORE CORE DRILLING DRILLING MACHINES MACHINES AND AND ACCESSORIESACCESSORIES
PRINCIPLES OF DRILLINGPRINCIPLES OF DRILLINGPRINCIPLES OF DRILLINGPRINCIPLES OF DRILLING
W.A.S.P.
WaterAnchorSpeedPower
W.A.S.P.
WaterAnchorSpeedPower
Complete CombinationAngle Combo
M-1 Drill RigM-1 Drill Rig2 ½" Square column with black oxidized finish2 ½" Square column with black oxidized finish
10" Bit capacity-14" with one spacer10" Bit capacity-14" with one spacer
M-1 Drill RigM-1 Drill Rig2 ½" Square column with black oxidized finish2 ½" Square column with black oxidized finish
10" Bit capacity-14" with one spacer10" Bit capacity-14" with one spacer
Anchor
M1AA-15 Core RigM1AA-15 Core RigM1AA-15 Core RigM1AA-15 Core Rig
M1AA-15M1AA-15• 6 6 ““ capacity capacity• Single Speed800 rpmSingle Speed800 rpm• 15A / 115V / 2.5HP15A / 115V / 2.5HP• Includes trap ringIncludes trap ring
Vacuum plate option
CompleteCombo
Anchor Stands
M-2 Drill RigM-2 Drill RigM-2 Drill RigM-2 Drill RigPrecision ground & chrome plated 2-7/8 square mastPrecision ground & chrome plated 2-7/8 square mast
1010”” Bit capacity - up to 36 Bit capacity - up to 36”” with spacers with spacers
Combo Stands
M-3 Drill RigM-3 Drill RigM-3 Drill RigM-3 Drill Rig Lightweight and EconomicalLightweight and Economical
CompleteStair Rig
Combo Stand
Anchor Stand
•360 degree swivel
Complete ComboAnchor Stand
M-4 Drill RigM-4 Drill RigM-4 Drill RigM-4 Drill Rig
Combo Stand
Swivel Stand
•6” bit capacity
M-5 Drill RigM-5 Drill RigM-5 Drill RigM-5 Drill Rig
Anchor Stand
Combo Stand
Complete Combo
M-5 PROM-5 PROM-5 PROM-5 PRO
• Equipped with chrome Equipped with chrome plated mast with 5-7/8plated mast with 5-7/8”” x 3- x 3-7/87/8”” rectangular cross rectangular cross section that makes drilling section that makes drilling with big bits much easier.with big bits much easier.
• 18-inch bit capacity with 18-inch bit capacity with standard pillow block. Much standard pillow block. Much larger bit capacity with larger bit capacity with optional spacersoptional spacers
• Heavier gear rack that can Heavier gear rack that can carry twice the load of our M-carry twice the load of our M-2 Drill Rig.2 Drill Rig.
Ideal for Larger Ideal for Larger Diameter Core Diameter Core Drilling JobsDrilling Jobs
M-6 Drill RigM-6 Drill RigM-6 Drill RigM-6 Drill Rig
Model DK12 Hand HeldModel DK12 Hand Held 14 amp, 110V, 3-speed 14 amp, 110V, 3-speed 580/1400/2900 rpm slip clutch580/1400/2900 rpm slip clutch
Model DK22Model DK2223amp, 110V, 3-speed 23amp, 110V, 3-speed
300/640/960 rpm, slip clutch300/640/960 rpm, slip clutch
WEKA Drill MotorsWEKA Drill MotorsWEKA Drill MotorsWEKA Drill Motors
Model DK32Model DK32
30 amp, 230V, 3-speed 30 amp, 230V, 3-speed 380/800/1200 rpm slip clutch380/800/1200 rpm slip clutch
Model DK42Model DK426 amp 460V, 3 phase 3-speed6 amp 460V, 3 phase 3-speedOr Or 13 amp 230V, 3 phase 3-speed, 13 amp 230V, 3 phase 3-speed, 200/420/630 rpm, slip clutch200/420/630 rpm, slip clutch
WEKA Drill MotorsWEKA Drill MotorsWEKA Drill MotorsWEKA Drill Motors
Model DK52Model DK528 amp, 460V, 3-phase8 amp, 460V, 3-phase
OrOr16 amp, 230V, 3-phase16 amp, 230V, 3-phase
160/310/470 rpm160/310/470 rpmslip clutchslip clutch
Weka DK13Weka DK13Weka DK13Weka DK13
• 14 amp
• Wet or dry
• 3 speed
• Also fits the M4 rig
• 14 amp
• Wet or dry
• 3 speed
• Also fits the M4 rig
• 120V/14A120V/14A• High speed - 6500 rpmHigh speed - 6500 rpm• M33/3 shaft for quick core M33/3 shaft for quick core removal at rear end of bitremoval at rear end of bit
Available 1 3/8Available 1 3/8”” telescopic telescopic trap ringtrap ring
Weka DK11 with Telescoping Weka DK11 with Telescoping Trap RingTrap Ring
Weka DK11 with Telescoping Weka DK11 with Telescoping Trap RingTrap Ring
•For use on M33 bits
Weka DK16 Weka DK16 Weka DK16 Weka DK16
Intellitronik™ inside!• Slow Start (safer operation & low start-up current)
• Overload Warning • Advanced Overload Protection • Instant Restart
Intellitronik™ inside!• Slow Start (safer operation & low start-up current)
• Overload Warning • Advanced Overload Protection • Instant Restart
• 30% more nominal power than the DK12• same “practical” power as the DK12 with thermal overload protection• Same weight and size as the DK12 (faster rotor, different gear box) /
decal claiming DK16 advantages
CB500-HHCB500-HHCB500-HHCB500-HH
• Up to 3” bit capacity• 2-speed 1100 and 2200 RPM• Shoulder brace• Fits the M-4 mount• Part # 4244004
Drill MotorsDrill MotorsDrill MotorsDrill Motors
CB748CB748
20 amp, 2-speed 350/900 rpm20 amp, 2-speed 350/900 rpm
Slip clutchSlip clutch
MilwaukeeMilwaukee
Model 4004 – 20amp 300/600 rpm Model 4004 – 20amp 300/600 rpm Model 4096 – 20 amp 450/900 rpm Model 4096 – 20 amp 450/900 rpm Model 4005 – 20 amp 600/1200 rpm Model 4005 – 20 amp 600/1200 rpm Model 4092 – 15 amp 375/750 rpm Model 4092 – 15 amp 375/750 rpm Model 4097 – 15 amp 450/1200 rpmModel 4097 – 15 amp 450/1200 rpm
CB700CB700
20 amp, 2-speed 400/930 rpm 20 amp, 2-speed 400/930 rpm Slip clutchSlip clutch
•Pneumatic motors also available
Control PanelsControl PanelsControl PanelsControl Panels
Single Switch/Amp Meter
Dual Switch/Amp Meter
Digital Dual
Switch/Amp Meter
On/Off Switch
ADAPTERSADAPTERSADAPTERSADAPTERS
EXTENSIONSEXTENSIONSEXTENSIONSEXTENSIONS
HILTI HILTI COMPATIBLE COMPATIBLE ADAPTERSADAPTERS
HILTI HILTI COMPATIBLE COMPATIBLE ADAPTERSADAPTERS
A.A. Webster MotorWebster Motor
B. Char-Lynn MotorB. Char-Lynn Motor
C. White MotorC. White Motor
D. Pillow Block & SpindleD. Pillow Block & Spindle
E. Flow Control ValveE. Flow Control Valve
Hydraulic MotorsHydraulic MotorsHydraulic MotorsHydraulic Motors
A B C D E
Vacuum Anchor Method-to-Floor Recommended for 8”
diam. holes or less
Turn machine on itsback and insert vacseal under machinebase
Turn drilling machineup-right and loosen 4base leveling screws
Plug cord intogrounded outlet andturn pump switch on
• Recommended for 8Recommended for 8”” diameter diameter holes or lessholes or less
• Turn machine on it back and Turn machine on it back and insert vacuum seal under insert vacuum seal under machine backmachine back
• Turn drilling machine upright Turn drilling machine upright and loosen the 4 leveling screwsand loosen the 4 leveling screws
• Plug cord into grounded outlet Plug cord into grounded outlet and turn pump switch onand turn pump switch on
• Make sure vacuum gasket is Make sure vacuum gasket is firmly in place under rig basefirmly in place under rig base
Drill Rig Vacuum BasesDrill Rig Vacuum BasesDrill Rig Vacuum BasesDrill Rig Vacuum Bases
Vacuum Anchor Method-to-Floor Insert vacuum slot cap
into anchor bolt slotand check hoseconnections
Machine should nowbe vacuum anchored
Adjust 4 levelingscrews to eliminaterocking
After use, turn drillmotor off, unplug &remove
• Insert vacuum slot cap into Insert vacuum slot cap into anchor bolt slot and check hose anchor bolt slot and check hose connectionsconnections
• Machine should now be Machine should now be vacuum anchoredvacuum anchored
• Adjust the 4 leveling screws to Adjust the 4 leveling screws to eliminate rockingeliminate rocking
• After use, turn drill motor off, After use, turn drill motor off, unplug and removeunplug and remove
Vacuum Anchor Method-to-FloorVacuum Anchor Method-to-FloorVacuum Anchor Method-to-FloorVacuum Anchor Method-to-Floor
Operating a Rig
Securely anchor the rig
Don’t plug in until readyto drill
Thread the bit ontospindle and tighten
Never turn on rig with bitresting on the concrete
Check hole alignment bylowering drill until 1/2”from concrete
• Align rig for desired holeAlign rig for desired hole
• Securely anchor the rigSecurely anchor the rig
• Level the rigLevel the rig
• Select drill speed for specific Select drill speed for specific size bit (never change speed size bit (never change speed while drill is spinning)while drill is spinning)
• Connect power and waterConnect power and water
• Turn water valve on (1 to 2 Turn water valve on (1 to 2 gallons per minute)gallons per minute)
• Turn drill on and begin to drill Turn drill on and begin to drill (full load after crown has (full load after crown has penetrated surface)penetrated surface)
• Even feed pressureEven feed pressure
Operating a Drill Operating a Drill RigRigOperating a Drill Operating a Drill RigRig
Core RetrievalCore RetrievalCore RetrievalCore Retrieval
Core Catcher
Core Extractor
Pipe MountPipe MountPipe MountPipe Mount
• Works on any core drillWorks on any core drill
• Easily and securely Easily and securely attaches rig to most pipeattaches rig to most pipe
• Comes complete with Comes complete with all attachmentsall attachments
50” Bit on M-6 Rig
Core Drilling Core Drilling ScrapbookScrapbook
Inverted Drilling
Core Drilling Core Drilling ScrapbookScrapbook
36” diameter hole drilled at 23° angle - 8 feet deep
Core Drilling Core Drilling ScrapbookScrapbook
Stitch Drilling (6” Diameter Holes)
Core Drilling Core Drilling ScrapbookScrapbook
Small Diameter Holes With Extensions
Core Drilling Core Drilling ScrapbookScrapbook
Angle Drilling With Standard Stand
Core Drilling Core Drilling ScrapbookScrapbook
Core Drilling Core Drilling ScrapbookScrapbook
Core Rig Team QuestionsCore Rig Team QuestionsCore Rig Team QuestionsCore Rig Team Questions
T F 1. The M-1 Drill Rig has a maximum 14” bit capacity.
T F 2. A combination drill stand can be anchored or vacuumed to the floor.
T F 3. The M-2 Drill Rig has a capacity up to 36”.
T F 4. The M-2 Drill Rig is the best model for stairs.
T F 5. The M-3 Drill Rig has a 360 degree swivel mast.
T F 6. The M-4 Drill Rig can be used with a 10” bit.
T F 7. The M-4 Drill Rig converts to a hand held.
T F 8. Our 24HG Vacuum Pump is used to pick up the water during drilling.
T F 9. Our Dovetail Motor Q.D. option for the M-1 and M-2 Rigs makes motor
removal fast and easy.
T F 10. The vacuum plate with wheels accessory converts an anchor base to a
vacuum base on the M-1, 2 & 3 rigs.
T F 11. We have drilling systems available in electric, hydraulic and pneumatic.
T F 12. You can stand on a drill rig base to hold it down while drilling.