Introduction

P Box 57, 3360 AB Sliedrecht .O. Industrieweg 6, 3361 HJ Sliedrecht The Netherlands Tel. +31 184 41 33 00 Fax +31 184 41 49 59 E-mail sales@vanbeest.nl www.vanbeest.nl

Dear customer, For over 85 years the production of high tensile shackles has been our core business and competence. Dirk van Beest founded the Van Beest company in 1922, initially as a supplier of iron works to the dredging industry, which was strongly developed in the Sliedrecht area. From the very beginning, the company has been forging shackles. Its ironwork expertise gave the Van Beest shackle an edge over the competition and this was the start of a network of professional users that now stretches across the globe. The designs and quality standards of our shackles are the result of requirements put forward over the years by our customers in markets throughout the world. Our shackles are marked Green Pin, and we are the sole proprietors of the trade name Green Pin. Production At Van Beest we were faced with a labour-intensive production unit. Over the years Van Beest invested, with its own engineers, in development of a series production line of high quality output. The highly automated machines in the factory are custom built to Van Beests requirements and thus to those of our customers. The same technicians demand the quality of the products during production and therefore guarantee quality to our customers. Each individual Green Pin shackle is marked with the steel grade and a traceability code. But quality is not only a matter of the product itself, it stretches across the entire organization. Since 1993 our company has been ISO certified by Lloyds; currently we are ISO 9001-2000 certified. Accessories Our Green Pin shackles are used by professionals in many different environments such as the offshore industry, naval construction, the fishing industry, mining, and general industry, to mention just a few. The Green Pin shackle is usually the final connection, and to serve our customers best, we have added a wide range of steel wire rope and chain accessories which complement our full range of high quality shackles. These accessories are engineered by Van Beest and carefully sourced from certified suppliers to ensure they represent the same high quality performance as our own products. Distribution Both our Green Pin shackles and accessories are inspected and stored at our main warehouse in Sliedrecht, 30 km from Rotterdam, where we offer our wide range of shackles and accessories from stock. Rotterdam is the main seaport to Europe inbound and has sailing connections to all the major business centres across the world outbound. Storage efficiency is optimized by the latest computer software, enabling us to make maximum use of our storage facilities. A customer order can be shipped from our warehouse within 4 hours from placing the order. Additionally, wholesalers throughout the world maintain stocks of our Green Pin shackles and accessories in order to serve their own target markets best. In over 80 countries worldwide Green Pin shackles and accessories are available from storage at our various distributors. We will be pleased to advise you of the Green Pin supplier nearest to you to obtain supplies. We trust this catalogue will be a helpful business tool for you and that it will assist you in serving your customers needs. In addition, our skilled salespeople and technicians are always at your service. Please do not hesitate to contact us for any question related to shackles or other wire rope and chain accessories in general. We are convinced that with the full range of our Green Pin products and services you have found an excellent source that enables you to meet your needs in the global marketplace. Kind regards,

C. Boer Managing Director

R.M. Meer General Sales Manager

P .S.: For general business terms and conditions see page 166VAN BEEST BV, manufacturer and supplier of wire rope and chain fittings. Reg. trade mark Green PinRabobank: accountnumber 35 93 43 155. IBAN code: NL86RABO0359343155, SWIFT/BIC code: RABONL2U Postbank 189638, Vat number NL 0091.33.835.B01, Chamber of Commerce Dordrecht: number 23009317 All our offers and contracts are subject to our general conditions of business as registered with the District Court of Dordrecht on May 13, 1994 under number 17.088. Copies of these conditions are printed in our catalogue or can be obtained on request.

Member of Van Beest International

Introduction

2

Introduction

VAN BEEST BV, manufacturer and supplier of wire rope and chain fittings. Registered trademark Green Pin

VAN BEEST BV Head Office P Box 57 .O. 3360 AB Sliedrecht The Netherlands Industrieweg 6 3361 HJ Sliedrecht The Netherlands Telephone Telefax E-mail Internet +31 184 41 33 00 +31 184 41 49 59 sales@vanbeest.nl www.vanbeest.nl

VAN BEEST GmbH & Co. KG

VAN BEEST USA, L.L.C.

P Box 15674 .O. Houston, Texas 77220 United States of America Industriestrae 9 D-59457 Werl Germany Telephone Telefax E-mail +49 2922 97 430 +49 2922 83 289 sales@vanbeest.de 5820 Harvey Wilson Drive Houston, Texas 77020 United States of America Telephone Telefax E-mail +1 800 489 75 08 +1 713 674 82 24 vanbeestus@aol.com

your reliable partner

We reserve the right to make amendments on specifications mentioned in this catalogue without prior notification. Specifications show general compliance with the various standards and should not be taken to meet all terms of the contract or purchase order. Chamber of Commerce Dordrecht, Registration Number 23009317 VAT Number NL 0091.33.835.B01 copyright 2008 VAN BEEST BV, Sliedrecht All Rights Reserved

3

Introduction

GeneralIn case you do not use the products yourself but are reselling these as a part of a product manufactured by yourself, please take our general cautions and warnings into account and make these known to your customers as well. In any case, we do not accept any responsibility or liability, nor can we be held responsible for any misuse or damage with, by or at your customers due to negligent use.

DefinitionsMaterial For the production of shackles and other lifting devices, different raw materials are used, depending on the use of the finished product. For shackles for example, depending on the specific use, the following raw materials can be applied: mild steel, untreated, comparable to grade 3 high tensile steel, untreated, or normalized, which is comparable to grade 4 high tensile steel, quenched and tempered, which is comparable to grade 6 alloy steel, quenched and tempered, which is comparable to grade 8

Load Following terms are used to define a load: Working Load Limit or WLL: the maximum load the product is designed to support, in general use and in a straight pull. Proof Load or PL: this is the load applied on proof testing the product. At this load the product may not show visual deformation. For further specific information as to the proof load applied, we refer to the separate paragraph on testing further on. Minimum Breaking Load or MBL; the minimum load at which the product may fail or no longer support the load. Where applicable the details on the MBL are given specifically for each product range, at the beginning of each chapter. Shock Load: a load resulting from a very rapid application of the load on the product. Shock loads are to be avoided in practice since these increases the stress on the product significantly and may affect its product life. The unit that is used in this catalogue to indicate WLL, PL and MBL is metric tons. Safety factor This factor gives the ratio between the Minimum Breaking Load and the Working Load Limit. For the standard range of Green Pin shackles for example, the safety factor is 6:1, meaning that the shackle may only break once it is overloaded by a factor of at least 6 (6 times its designed Working Load Limit). Product dimensions All product dimensions in this catalogue are nominal dimensions. Product design, materials and/or specifications can be subject to alterations without prior notification. Finish Products can have following finish: Self coloured: the product is delivered in the condition it has been forged or machined and has undergone no specific finish treatment. Electro-galvanized: the product is electro-galvanized according to the customary standards, after the actual production of the product. The thickness of the coating is at least 5 m. Hot dipped galvanized: the product is hot dipped galvanized according to the customary standards, after the actual production of the product. The thickness of the coating is at least 70 m. Painted: the product is painted in a specific colour after the production. Standard These refer to the specific standards indicated for the product. Temperature range This indicates the temperature range at which the product can be used. Outside the temperature range the WLL of a product may be affected.

4

Introduction

CertificatesDepending on the type of product and certificate availability for a certain product, following certificates are used in this catalogue: works certificate in accordance with EN 10204 - 2.1 or 2.2; certificate of basic raw material in accordance with EN 10204 - 3.1; manufacturer test certificate; EC Declaration of Conformity in accordance with annex IIA of the machine directive 98/37/EC and the latest amendments; inspection certificate in accordance with EN 10204 - 3.2; proof load test certificate; certificate with the actual breaking load experienced on tested samples. Please refer to the relevant product chapter for further details on certificates. On request we can test under supervision of a classification bureau like LROS, DNV, BV, etc.. Abbreviations The following abbreviations are used in this catalogue: C A R S P E G Carbon steel Alloy steel Stainless steel Self coloured Painted Electro-galvanized Hot dipped galvanized

5

Introduction

TestingGenerally the following proof loads are applied to the load rated products and certificates can be supplied upon request. For further conditions on certificates please consult the general price list. For Green Pin shackles, the actual proof load depends on the shackle type and dimension and is applied as follows: Green Pin standard shackles polar shackles heavy duty shackles proofload tons 0.66 1 1.5 2 3 4 6.5 9.5 10 13 14 17 19 24 27 30 34 36 42 50 60 65 80 74 90 127.5 180 225 300 375 450 600 750 900 1050 1200 1350 1500 1875 2250 110 170 240 225 262.5 187.5 225 300 375 450 532 665 798 931 1064 1197 1330 1663 1995 60 82.5 112.5 19 25 Green Pin super shackles Green Pin sling shackles

working load limit tons 0.33 0.5 0.75 1 1.5 2 3.25 3.3 4.75 5 6.5 7 8.5 9.5 12 12.5 13.5 15 17 18 21 25 30 35 40 42.5 55 75 85 120 125 150 175 200 250 300 400 500 600 700 800 900 1000 1250 1500

proofload tons

proofload tons

6.6

6

Introduction

General cautions and warningsAll Working Load Limits (WLL) indicated in this catalogue or in other Van Beest literature or publications are only applicable to recently supplied, new and unused products used under normal conditions. Should extreme circumstances or shock loading be applicable, this must be taken into account when specifying the products to be used. The Working Load Limit should be applied in a straight pull and overloads should not be applied. This also applies to side loads, which also should be avoided, as the products are not designed for this purpose and the application of a side load may significantly decrease the product life. The Working Load Limit for the product corresponds to static use. In case of dynamic use (breaking, accelerations, shocks), the effective stress on the product increases significantly which can lead to product failure. It is required that the products are regularly inspected and that the inspection should take place in accordance with the safety standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material structure. Inspection should take place at least every six months and even more frequently when the products are used in severe operating conditions. In accordance with our on-going policy to improve our products, some dimensions or product markings may differ from those stated. The characteristics mentioned in this catalogue or in other Van Beest literature or publications are given merely as an indication. Van Beest reserves the right to make all suitable modifications to any product, even after acceptance of the customer order. In any case, the essential characteristics and performances of the products shall not be negatively affected by such modifications. Any dimension considered to be critical should be verified with our engineering department.

Conversion factorsTo convert from Length mm inch Mass US tons metric tons metric tons pounds metric tons kilogram metric tons kilo Newton pounds kilogram Torque Newton meter foot pound-force to inch mm multiply by 0.0393701 25.4

metric tons US tons pounds metric tons kilogram metric tons kilo Newton metric tons kilogram pounds

0.9071847 1.1023113 2204.6226218 0.0004536 1000 0.001 9.8066500 0.1019716 0.4535924 2.2046226

foot pound-force Newton meter

0.7375621 1.3558180

7

Introduction

8

Introduction10 50 60 66 70 78 90 94 100 106 110 114 116 122 132 140

1 Shackles 2 Thimbles 3 Wire Rope Clips 4 Sleeves 5 Sockets 6 Turnbuckles 7 Links 8 Swivels 9 Hooks 10 Eye Bolts/Eye Nuts 11 Loadbinders 12 Chain 13 Plate Lifting Clamps 14 Blocks 15 General Hardware 16 Stainless Steel Products

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Shackles

ApplicationsShackles are used in lifting and static systems as removable links to connect (steel) wire rope, chain and other fittings. Screw pin shackles are used mainly for non-permanent applications. Safety bolt shackles are used for long-term or permanent applications or where the load may slide on the pin causing rotation of the pin. Chain or dee shackles are mainly used on one-leg systems whereas anchor or bow shackles are mainly used on multi-leg systems.

RangeVan Beest offers a wide range of bow and dee shackles, depending on the application on which the shackle is going to be used; the range stretches from Working Load Limit (WLL) 0.33 tons to 1500 tons. Therefore, our customers have a very extensive range to choose the shackle exactly suitable for the application. Most of the shackles are directly available from stock. Furthermore, shackles can be supplied to many standards such as the US Federal Specification RR-C-271, EN 13889, British Standard 3032, DIN 82101, DIN 82016 etc. Polar shackles are for use in extreme climatic conditions with material properties guaranteed up to temperatures of -40oC, and furthermore we offer a wide range of general commercial shackles, which are not suitable for lifting but merely for fixing purposes.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1610

DesignAll Van Beest shackles have a specific design for a specific application. Examples are the Super shackles which are made out of grade 8 steel enabling the dimensions of the shackles to be minimized for use in limited space conditions, without loss of functionality or Working Load Limit. Or sling shackles for use with large slings, to provide a better radius to the sling being used. Another example of functional design is the use of shackles where the pin has a square sunken hole so as not to obstruct the use of fishing nets. These are all examples of a highly functional design, to optimize the use of the Van Beest shackles in daily use. Furthermore, shackles used for lifting applications are stamped with the following marks, to specify the quality and safety of use of the shackles: Working Load Limit manufacturers identification symbol traceability code steel grade CE conformity code

i.e. WLL 25 T i.e. Bs, indicating Van Beest i.e. H pertaining to a particular batch i.e. 4, 6, 8 i.e. CE, Conformit Europen indicating that the product is suitable for lifting purposes.

Van Beest Green Pin shackles meet all relevant requirements of the Machinery Directive 98/37/EC and all latest amendments.

FinishShackles supplied by Van Beest can be either hot dipped galvanized, electro-galvanized, painted or self coloured, depending on the type of shackle and its application. Please consult the product section further on for each type of shackle what finish the product has.

Shackles

CertificationUpon request at time of order, all load rated shackles can be supplied with any of the following documents or certificates: works certificate in accordance with EN 10204 - 2.1 or 2.2; certificate of basic raw material in accordance with EN 10204 - 3.1; manufacturer test certificate; EC Declaration of Conformity in accordance with annex IIA of the machine directive 98/37/EC; inspection certificate in accordance with EN 10204 - 3.2; proof load test certificate; certificate with the actual breaking load experienced on tested samples; test report of Magnetic Particle Inspection (M.P .I.); test report of Ultrasonic Inspection (U.S.).

The first four of the above mentioned certificates can be supplied at no extra charge. For all other certificates, additional costs will be charged. The test certificates can be supplied surveyed by all official classification societies, such as Lloyds, Det Norske Veritas, British Standards Bureau, American Bureau of Shipping, Germanischer Lloyds or any other officially certified inspection body. Green Pin Standard Shackles and Green Pin Polar Shackles are DNV type approved to certification Note 2.7-1, lifting sets for offshore containers.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Instructions for useShackles should be inspected before use to ensure that: all markings are legible; the body and pin are both identifiable as being of the same size, type and make; the threads of the pin and the body are undamaged; never use a safety bolt type shackle without using the split cotter pin; the body and the pin are not distorted or unduly worn; the body and pin are free from nicks, gouges, cracks and corrosion; shackles may not be heat treated as this may affect their Working Load Limit; never modify, repair or reshape a shackle by welding, heating or bending as this will affect the Working Load Limit.

AssemblyEnsure that the pin is correctly screwed into the shackle eye, i.e. tighten hand-tight, then secure using a wrench or other suitable tool so that the collar of the pin is fully seated on the shackle eye. Ensure that the pin is of the correct length so that it penetrates the full depth of the screwed eye and allows the collar of the pin to seat on the surface of the shackle eye. Incorrect seating of the pin may be due to a bent pin, too tight fitting thread or misalignment of the pin holes. Do not use the shackle under these circumstances. Never replace a shackle pin except with one of the same size, type and make as it may not be suitable for the loads imposed. Select the correct type of shackle and its Working Load Limit for the particular application. Should extreme circumstances or shock loading be applicable, this must be well taken into account on selecting the correct shackle. Please note that commercial shackles are not to be used for lifting applications. Make sure that the shackle is supporting the load correctly, i.e. along the axis of the shackle body centreline, avoid introduction of bending loads, unstable loads and do not apply overloads.

11

Shackles

Side loadsSide loads should be avoided as well, as the products are not designed for this purpose. If side loads cannot be avoided, the following reduction factors must be taken into account: Reduction for side loading New Working Load Limit 100% of original Working Load Limit 70% of original Working Load Limit 50% of original Working Load Limit

Load angle 0 45 90

In-line loading is considered to be a load perpendicular to the pin and in the plane of the bow. Load angles in the table are the deviating angles from the in line loads.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1612

When using shackles in connection with multi-leg slings, due consideration should be given to the effect of the angle between the legs of the sling. As the angle increases, so does the load in the sling leg and consequently in any shackle attached to that leg.

When a shackle is used to connect two slings to the hook of a lifting device, a bow type shackle must be assembled with the slings in the shackle body and the hook engaged with the shackle pin. The angle between the slings should not exceed 120. To avoid eccentric loading of the shackle a loose spacer may be used on either end of the shackle pin. Do not reduce the width between the shackle jaws by welding washers or spacers to the inside faces of the eyes or by closing the jaws, as this will affect the properties of the shackle.

RIGHT

WRONG

When a shackle is used to secure the top block of a set of wire rope blocks the load on this shackle is increased by the value of the hoisting effect.

Shackles

Avoid applications where due to movement (e.g. of the load or the rope) the shackle pin can rotate and possibly be unscrewed. If such an application is necessary or when the shackle is to be left in place for a prolonged period or where maximum pin security is required, use a shackle with a safety bolt, nut and split cotter pin. Shackles should not be immersed in acidic solutions or exposed to acid fumes or other chemicals that are

potentially harmful for the shackle. Please be aware that these types of chemicals are used in certain production processes.

Point loadingMost of the times the load bearing component that is in connection with a shackle is of a rounded shape. Point loading of shackles is allowed but the minimum diameter of a rounded component should be equal or bigger than the bow size of the shackle being used. Bigger diameters and or flat parts (at shackle pin side) to increase contact area can be beneficial. Sharp edges should be avoided.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

TemperatureIf extreme temperature situations are applicable, the following load reduction must be taken into account: Reduction for elevated temperatures New Working Load Limit 100% of original Working Load Limit 90% of original Working Load Limit 75% of original Working Load Limit not allowed

Temperature up to 200C 200 - 300C 300 - 400C > 400C

The rating of shackles to EN 13889 assumes the absence of exceptionally hazardous conditions. Exceptionally hazardous conditions include offshore activities, the lifting of persons and the lifting of potentially dangerous loads such as molten metals, corrosive materials or fissile materials. In such cases a competent person should assess the degree of hazard and the safe working load should be reduced accordingly from the Working Load Limit.

InspectionIt is required that the shackles are regularly inspected and that the inspection should take place in accordance with the safety standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material structure. Inspection should take place at least every six months and even more frequently when the shackles are used in severe operating conditions.

Proofload testingIt is required that the shackles are regularly proofload tested and that the testing should take place in accordance with the safety standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material structure. Proofload testing should take place at least every 4 years and more frequently when the shackles are used in severe operating conditions.

13

Shackles

Green Pin Standard Shacklesbow shackles with screw collar pin Material Safety Factor Standard : bow and pin high tensile steel, Grade 6, quenched and tempered : MBL equals 6 x WLL : EN 13889 and meets performance requirements of US Fed. Spec. RR-C-271 Type IVA Class 2, Grade A Finish : hot dipped galvanized Temperature Range : -20C up to +200C Certification : at no extra charges this product can be supplied with a works certificate, certificate of basic raw material, manufacturer test certificate and/or EC Declaration of Conformity G-4161working diameter diameter diameter load bow pin eye limit a b c tons mm mm mm width eye d mm width inside e mm length inside f mm width bow g mm length length bolt i mm width weight each

h mm

j mm

kg

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1614

0.33 0.5 0.75 1 1.5 2 3.25 4.75 6.5 8.5 9.5 12 13.5 17 25 35 42.5 55

5 7 9 10 11 13.5 16 19 22 25 28 32 35 38 45 50 57 65

6 8 10 11 13 16 19 22 25 28 32 35 38 42 50 57 65 70

12.5 17 21 23 26 34 40 47 53 60 67 74 80 89 104 111 134 145

5 7 9 10 11 13.5 16 19 22 25 28 32 35 38 45 50 57 65

9.5 12 13.5 17 19 22 27 31 36 43 47 51 57 60 74 83 95 105

22 29 32 36.5 43 51 64 76 83 95 108 115 133 146 178 197 222 260

16 20 22 26 29 32 43 51 58 68 75 83 92 99 126 138 160 180

41 54 61 71 80 91 114 136 157 176 197 218 240 262 314 358 414 463

31 40 49 56 68 76 93 107 123 141 158 176 192 208 250 281 321 355

28 37 42 49 54 63 79 94 107 124 137 154 170 183 226 250 287 329

0.02 0.05 0.1 0.14 0.19 0.36 0.63 1.01 1.5 2.21 3.16 4.31 5.55 7.43 12.84 18.15 26.29 37.6

In inch

working diameter diameter diameter load bow pin eye limit a b c tons inch inch inch0.33 0.5 0.75 1 1.5 2 3.25 4.75 6.5 8.5 9.5 12 13.5 17 25 35 42.5 553

width eye d inch/16 9 /32 11 /32 3 /8 7 /16 17 /32 5 /8 3 /4 7 /8 1 1 1 1 1 1 1 2 2 /8 /32 3 /8 17 /32 25 /32 31 /32 1 /4 9 /169 1 3

width inside e inch/8 1 /2 17 /32 11 /16 3 /4 7 /8 3 /32 1 /4 7 /16 23 /32 7 /8 /4 /32 29 /32 9 /32 3 /4 1 /811 1 3

length inside f inch1 1 1 1 2 2 3 3 3 4 4 5 5 7 7 8 10 /8 5 /32 9 /32 7 /16 23 /3217 7

width bow g inch/8 25 /32 7 /8 1 1 1 1 2 2 2 2 3 3 3 4 5 6 7 /32 /32 23 /329 5 5

length

length bolt i inch1 1 1 2 2 3 3 4 4 5 6 6 7 8 9 11 12 14 /4 9 /16 15 /16 3 /16 11 /1611 1

width

weight each

h inch1 2 2 2 3 3 4 5 6 6 7 8 9 10 12 14 16 18 /8 1 /8 3 /8 25 /32 5 /32 19 /32 1 /2 11 /32 5 /32 29 /32 3 /4 9 /16 7 /16 5 /16 11 /32 3 /32 5 /16 1 /45

j inch1 1 1 1 2 2 3 3 4 4 5 6 6 7 8 9 11 12 /8 1 /2 11 /16 15 /16 1 /8 1 /2 1 /8 23 /32 3 /16 7 /8 3 /8 1 /32 11 /16 3 /16 29 /32 13 /16 5 /16 15 /161

lbs0.05 0.11 0.22 0.3 0.42 0.79 1.38 2.22 3.31 4.86 6.97 9.49 12.24 16.37 28.31 40.01 57.96 82.89

/16 1 /4 5 /16 3 /8 7 /16 1 /2 5 /8 3 /4 7 /8 1 1 1 1 1 1 2 2 2 /8 /4 3 /8 1 /2 3 /41 1 1

1

/4 5 /16 3 /8 7 /16 1 /2 5 /8 3 /4 7 /8 1 1 1 1 1 1 2 2 2 2 /8 1 /4 3 /8 1 /2 5 /81 9 1

/4 1 /2

/4 /16 3 /4

1 1 1 1 2 2 2 2 3 3 4 4 5 5

/2 11 /16 13 /16 29 /32 1 /32 11 /32 19 /32 7 /8 3 /32 11 /32 5 /8 29 /32 5 /32 1 /2 1 /8 11 /32 9 /32 3 /4

1

1 1 1 1 1 2 2 2 2 3 3 4

/32

/32 /4 1 /4 17 /32 1 /4 3 /43 3 3

9

/4 /4 1 /4

/32 /16 15 /16 9 /32 5 /8 29 /32 15 /16 7 /16 9 /32 3 /3211

9

/16 /16 13 /16 9 /16 3 /16 29 /32 9 /16 3 /16 13 /16 3 /32 5 /83

Shackles

Green Pin Standard Shacklesbow shackles with safety bolt Material Safety Factor Standard : bow and pin high tensile steel, Grade 6, quenched and tempered : MBL equals 6 x WLL : EN 13889 and meets performance requirements of US Fed. Spec. RR-C-271 Type IVA Class 3, Grade A Finish : hot dipped galvanized Temperature Range : -20C up to +200C Certification : at no extra charges this product can be supplied with a works certificate, certificate of basic raw material, manufacturer test certificate and/or EC Declaration of Conformity G-4163working diameter diameter diameter width width load bow pin eye eye inside limit a b c d e tons mm mm mm mm mm 0.5 7 8 17 7 12 0.75 9 10 21 9 13.5 1 10 11 23 10 17 1.5 11 13 26 11 19 2 13.5 16 34 13.5 22 3.25 16 19 40 16 27 4.75 19 22 47 19 31 6.5 22 25 53 22 36 8.5 25 28 60 25 43 9.5 28 32 67 28 47 12 32 35 74 32 51 13.5 35 38 80 35 57 17 38 42 89 38 60 25 45 50 104 45 74 35 50 57 111 50 83 42.5 57 65 134 57 95 55 65 70 145 65 105 85 75 83 163 75 127 length inside f mm 29 32 36.5 43 51 64 76 83 95 108 115 133 146 178 197 222 260 329 width bow g mm 20 22 26 29 32 43 51 58 68 75 83 92 99 126 138 160 180 190 length length bolt i mm 43 51 61 68 83 99 115 131 151 167 179 198 202 244 270 302 330 376 width thickness weight nut each j mm 37 42 49 54 63 79 94 107 124 137 154 170 183 226 250 287 329 355 k mm 4 5 8 11 13 17 20 23 25 28 31 34 19 24 27 30 33 40

h mm 54 61 71 80 91 114 136 157 176 197 218 240 262 314 358 414 463 556

kg 0.06 0.11 0.16 0.22 0.42 0.74 1.18 1.77 2.58 3.66 4.91 6.54 8.19 14.22 19.85 28.33 39.59 62

1 2 3 4 5

In inch

working diameter diameter diameter width load bow pin eye eye limit a b c d tons inch inch inch inch 1 5 11 9 0.5 /4 /16 /16 /32 5 3 13 11 0.75 /16 /8 /16 /32 3 7 29 3 1 /8 /16 /32 /8 7 1 7 1.5 /16 /2 1 1/32 /16 1 5 17 /2 /8 1 11/32 /32 2 5 3 5 3.25 /8 /4 1 19/32 /8 3 7 3 4.75 /4 /8 1 7/8 /4 7 7 6.5 /8 1 2 3/32 /8 8.5 1 1 1/8 2 11/32 1 9.5 1 1/8 1 1/4 2 5/8 1 1/8 12 1 1/4 1 3/8 2 29/32 1 9/32 13.5 1 3/8 1 1/2 3 5/32 1 3/8 17 1 1/2 1 5/8 3 1/2 1 17/32 25 1 3/4 2 4 1/8 1 25/32 35 2 2 1/4 4 11/32 2 31/32 42.5 2 1/4 2 9/16 5 9/32 2 1/4 55 2 1/2 2 3/4 5 3/4 2 9/16 85 3 3 1/4 6 7/16 2 15/16

width inside e inch 1 /2 17 /32 11 /16 3 /4 7 /8 1 3/32 1 1/4 1 7/16 1 23/32 1 7/8 2 2 1/4 2 11/32 2 29/32 3 9/32 3 3/4 4 1/8 5

length inside f inch 1 5/32 1 9/32 1 7/16 1 23/32 2 2 17/32 3 3 9/32 3 3/4 4 1/4 4 17/32 5 1/4 5 3/4 7 7 3/4 8 3/4 10 1/4 12 15/16

width bow g inch 25 /32 7 /8 1 1 5/32 1 9/32 1 23/32 2 2 9/32 2 11/16 2 15/16 3 9/32 3 5/8 3 29/32 4 15/16 5 7/16 6 9/32 7 3/32 7 1/2

length

length bolt i inch 1 23/32 2 2 3/8 2 11/16 3 9/32 3 29/32 4 17/32 5 5/32 5 15/16 6 19/32 7 1/32 7 25/32 7 15/16 9 19/32 10 5/8 11 7/8 13 14 25/32

width thickness weight nut each j inch 1 1/2 1 11/16 1 15/16 2 1/8 2 1/2 3 1/8 3 23/32 4 3/16 4 7/8 5 3/8 6 3/32 6 23/32 7 3/16 8 29/32 9 13/16 11 5/16 12 15/16 14 k inch lbs 5 /32 0.13 3 /16 0.25 5 /16 0.34 7 /16 0.48 17 /32 0.92 11 /16 1.62 25 /32 2.59 29 /32 3.9 1 5.69 1 1/8 8.06 1 1/4 10.81 1 11/32 14.42 3 /4 18.06 1 5/16 31.34 1 3/32 43.77 1 3/16 62.46 1 5/16 87.27 1 19/32 136.69

6 7 8 9 10 11 12 13 14 15 16

h inch 2 1/8 2 3/8 2 25/32 3 5/32 3 19/32 4 1/2 5 11/32 6 5/32 6 29/32 7 3/4 8 9/16 9 7/16 10 5/16 12 11/32 14 3/32 16 5/16 18 1/4 21 29/32

15

Shackles

Green Pin Standard Shacklesdee shackles with screw collar pin Material Safety Factor Standard : bow and pin high tensile steel, Grade 6, quenched and tempered : MBL equals 6 x WLL : EN 13889 and meets performance requirements of US Fed. Spec. RR-C-271 Type IVB Class 2, Grade A Finish : hot dipped galvanized Temperature Range : -20 C up to +200 C Certification : at no extra charges this product can be supplied with a works certificate, certificate of basic raw material, manufacturer test certificate and/or EC Declaration of Conformity G-4151 working load limit tons 0.33 0.5 0.75 1 1.5 2 3.25 4.75 6.5 8.5 9.5 12 13.5 17 25 35 42.5 55 diameter diameter diameter bow pin eye a mm 5 7 9 10 11 13.5 16 19 22 25 28 32 35 38 45 50 57 65 b mm 6 8 10 11 13 16 19 22 25 28 32 35 38 42 50 57 65 70 c mm 12.5 17 21 23 26 34 40 47 53 60 67 74 80 89 104 111 134 145 width eye d mm 5 7 9 10 11 13.5 16 19 22 25 28 32 35 38 45 50 57 65 width inside e mm 9.5 12 13.5 17 19 22 27 31 36 43 47 51 57 60 74 83 95 105 length inside f mm 19 22 26 32 37 43 51 59 73 85 90 94 115 127 149 171 190 203 length length bolt h mm 31 40 49 56 68 76 93 107 123 141 158 176 192 208 250 281 321 355 weight each

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1616

g mm 38 47 56 66 74 85 105 125 144 161 179 199 220 239 283 333 360 399

kg 0.02 0.05 0.09 0.14 0.19 0.32 0.54 0.87 1.34 2.08 2.77 3.72 5.14 6.85 11.45 16.86 24.61 32.65

In inch

working load limit tons 0.33 0.5 0.75 1 1.5 2 3.25 4.75 6.5 8.5 9.5 12 13.5 17 25 35 42.5 55

diameter diameter diameter bow pin eye a inch 3 /16 1 /4 5 /16 3 /8 7 /16 1 /2 5 /8 3 /4 7 /8 1 1 1/8 1 1/4 1 3/8 1 1/2 1 3/4 2 2 1/4 2 1/2 b inch 1 /4 5 /16 3 /8 7 /16 1 /2 5 /8 3 /4 7 /8 1 1 1/8 1 1/4 1 3/8 1 1/2 1 5/8 2 2 1/4 2 9/16 2 3/4 c inch 1 /2 11 /16 13 /16 29 /32 1 1/32 1 11/32 1 19/32 1 7/8 2 3/32 2 11/32 2 5/8 2 29/32 3 5/32 3 1/2 4 1/8 4 11/32 5 9/32 5 3/4

width eye d inch 3 /16 9 /32 11 /32 3 /8 7 /16 17 /32 5 /8 3 /4 7 /8 1 1 1/8 1 9/32 1 3/8 1 17/32 1 25/32 1 31/32 2 1/4 2 9/16

width inside e inch 3 /8 1 /2 17 /32 11 /16 3 /4 7 /8 1 3/32 1 1/4 1 7/16 1 23/32 1 7/8 2 2 1/4 2 11/32 2 29/32 3 9/32 3 3/4 4 1/8

length inside f inch 3 /4 7 /8 1 1/32 1 1/4 1 1/2 1 23/32 2 2 5/16 2 7/8 3 11/32 3 9/16 3 23/32 4 17/32 5 5 7/8 6 3/4 7 1/2 8

length

lenght bolt h inch 1 1/4 1 9/16 1 15/16 2 3/16 2 11/16 3 3 11/16 4 3/16 4 13/16 5 9/16 6 3/16 6 29/32 7 9/16 8 3/16 9 13/16 11 3/32 12 5/8 14

weight each

g inch 1 17/32 1 7/8 2 3/16 2 19/32 2 29/32 3 11/32 4 1/8 4 29/32 5 11/16 6 5/16 7 1/32 7 13/16 8 11/16 9 3/8 11 5/32 13 1/8 14 5/32 15 23/32

lbs 0.04 0.11 0.2 0.3 0.42 0.7 1.19 1.92 2.95 4.59 6.1 8.2 11.33 15.1 25.23 37.17 54.26 71.98

Shackles

Green Pin Standard Shacklesdee shackles with safety bolt Material Safety Factor Standard : bow and pin high tensile steel, Grade 6, quenched and tempered : MBL equals 6 x WLL : EN 13889 and meets performance requirements of US Fed. Spec. RR-C-271 Type IVB Class 3, Grade A Finish : hot dipped galvanized Temperature Range : -20 C up to +200 C Certification : at no extra charges this product can be supplied with a works certificate, certificate of basic raw material, manufacturer test certificate and/or EC Declaration of Conformity working diameter diameter diameter load bow pin eye limit a b c tons mm mm mm 2 13.5 16 34 3.25 16 19 40 4.75 19 22 47 6.5 22 25 53 8.5 25 28 60 9.5 28 32 67 12 32 35 74 13.5 35 38 80 17 38 42 89 25 45 50 104 35 50 57 111 42.5 57 65 134 55 65 70 145 85 75 83 163 width eye d mm 13.5 16 19 22 25 28 32 35 38 45 50 57 65 75 width inside e mm 22 27 31 36 43 47 51 57 60 74 83 95 105 127 length inside f mm 43 51 59 73 85 90 94 115 127 149 171 190 203 229 length length thickness weight bolt nut each h mm 83 99 115 131 151 167 179 198 202 244 270 302 330 376 i mm 13 17 20 23 25 28 31 34 19 24 27 30 33 40

G-4153

g mm 85 105 125 144 161 179 199 220 239 283 333 360 399 455

kg 0.39 0.67 1.08 1.66 2.46 3.4 4.51 6.1 7.63 13.25 18.53 25.94 35.33 52.97

1 2 3 4

In inch

5width eye d inch17

working diameter diameter diameter load bow pin eye limit a b c tons inch inch inch2 3.25 4.75 6.5 8.5 9.5 12 13.5 17 25 35 42.5 55 851

width inside e inch1 1 1 1 1 2 2 2 2 3 3 4 5 /8 3 /32 1 /4 7 /16 23 /32 7 /8 /4 11 /32 29 /32 9 /32 3 /4 1 /81 7

length inside f inch1 2 2 2 3 3 3 4 5 5 6 7 8 923

length

length thickness weight bolt nut each h inch3 3 4 5 5 6 7 7 7 9 10 11 13 14 /32 29 /32 17 /32 5 /32 15 /16 9 /16 1 /32 25 /32 15 /16 19 /32 5 /8 29 /3225 9

6 7 8 9 10 11 12 13 14 15 16

g inch3 4 4 5 6 7 7 8 9 11 13 14 15 1711

i inch17

lbs0.85 1.48 2.39 3.66 5.42 7.5 9.95 13.45 16.82 29.21 40.86 57.19 77.89 116.77

/2 5 /8 3 /4 7 /8 1 1 1 1 1 1 2 2 2 31 1

5

/8 3 /4 7 /8 1 1 1 1 1 1 2 2 2 2 31

/8 /4 3 /8 1 /2 3 /41 1

/8 1 /4 3 /8 1 /2 5 /81

/4 /2

/4 9 /16 3 /4 1 /4

1 1 1 2 2 2 2 3 3 4 4 5 5 6

11

/32 19 /32 7 /8 3 /32 11 /32 5 /8 29 /32 5 /32 1 /2 1 /8 11 /32 9 /32 3 /4 7 /16

/32 5 /8 3 /4 7 /81 9

/32

1 1 1 1 1 1 1 2 2 2

/8 /32 3 /8 17 /32 25 /32 31 /32 1 /4 9 /16 15 /16

/16 /8 11 /32 9 /16 23 /32 17 /327 7 3

5

/8 /4 1 /2

/32 1 /8 29 /32 11 /16 5 /16 1 /32 13 /16 11 /16 3 /8 5 /32 1 /8 5 /32 23 /32 29 /32

/32 11 /16 25 /32 29 /32 1 1 1 1 1 1 1 1 1 /8 /4 11 /32 3 /4 15 /16 3 /32 3 /16 5 /16 19 /321 1

/32

17

Shackles

Green Pin Heavy Duty Shacklesbow shackles with safety bolt Material Safety Factor Finish Certification : : : : bow and pin alloy steel, Grade 8 quenched and tempered MBL equals 5 x WLL shackle bow painted silver, pin painted green (120 tons shackle is hot dipped galvanized) at no extra charges this product can be supplied with a works certificate, certificate of basic raw material, manufacturer test certificate, EC Declaration of Conformity and all shackles starting from 150 tons are supplied with a Lloyds Register of Shipping Certificate on proof load : +5% forging tolerance on inside width and lengthwidth inside e mm 144 165 175 200 200 225 250 275 300 300 320 340 360 360 length inside f mm 381 400 500 540 600 650 700 700 700 700 700 700 700 700 width bow g mm 238 275 290 305 305 325 350 375 400 400 420 420 450 450 length length bolt i mm 440 490 520 560 575 690 710 810 850 870 920 940 1020 1060 width thickness weight nut each j mm 416 485 530 565 585 665 710 775 820 820 860 900 970 1010 k mm 50 60 60 65 70 70 70 70 70 70 70 70 70 70

Note P-6036

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1618

working diameter diameter diameter width load bow pin eye eye limit a b c d tons mm mm mm mm 120 95 95 215 89 150 105 108 245 100 200 120 130 288 110 250 130 140 308 115 300 140 150 335 120 400 170 175 387 160 500 180 185 410 160 600 200 205 458 185 700 210 215 468 200 800 210 220 478 200 900 220 230 500 210 1000 240 240 530 210 1250 260 270 600 225 1500 280 290 640 225

h mm 667 702 854 921 1018 1137 1213 1267 1287 1294 1320 1360 1430 1480

kg 110 160 235 285 340 560 685 880 980 1100 1280 1460 1990 2400

In inch

working diameter diameter diameter width load bow pin eye eye limit a b c d tons inch inch inch inch 120 3 3/ 4 3 3/ 4 8 1/ 2 3 17/32 150 4 4 1/ 4 9 5/ 8 3 15/16 200 4 3/4 5 1/8 11 11/32 4 5/16 250 4 7/8 5 1/2 12 1/8 4 17/32 5 7/8 13 3/16 4 23/32 300 5 5/16 400 6 1/2 6 7/8 15 1/4 6 5/16 500 6 7/8 7 1/4 16 5/32 6 5/16 600 7 5/8 8 1/16 18 7 9/32 700 8 1/16 8 1/2 18 7/16 7 7/ 8 800 8 1/ 4 8 5/8 18 13/16 7 7/8 900 8 5/ 8 9 1/16 19 11/16 8 9/32 1000 9 1/16 9 7/16 20 7/8 8 9/32 1250 10 1/4 10 5/8 23 5/8 8 7/8 1500 11 11 7/16 25 3/16 8 7/8

width inside e inch 5 11/16 6 17/32 6 29/32 7 7/8 7 7/8 8 7/8 9 13/16 10 13/16 11 13/16 11 13/16 12 19/32 13 3/8 14 5/32 14 5/32

length inside f inch 15 15 3/4 19 11/16 21 9/32 23 5/8 25 19/32 27 1/2 27 1/2 27 1/2 27 1/2 27 1/2 27 1/2 27 1/2 27 1/2

width bow g inch 9 11/32 10 13/16 11 7/16 12 12 12 25/32 13 25/32 14 3/4 15 3/4 15 3/4 16 9/16 16 9/16 17 23/32 17 23/32

length

length bolt i inch 17 5/16 19 9/32 20 1/2 22 22 5/8 27 5/32 28 31 7/8 33 1/2 34 1/4 36 1/4 37 40 1/4 41 3/4

width thickness weight nut each j inch 16 3/8 19 1/8 20 7/8 22 1/4 23 26 1/4 28 30 1/2 32 3/8 32 3/8 33 7/8 35 1/2 38 1/4 39 3/4 k inch 2 2 3/ 8 2 3/8 2 9/16 2 3/4 2 3/4 2 3/4 2 3/4 2 3/4 2 3/4 2 3/4 2 3/4 2 3/4 2 3/ 4

h inch 26 9/32 27 5/8 33 5/8 36 9/32 40 44 3/4 47 3/4 49 7/8 50 11/16 51 52 53 9/16 56 5/16 58 5/16

lbs 243 353 518 628 750 1235 1510 1940 2161 2425 2822 3219 4387 5291

Shackles

Green Pin Heavy Duty Shacklesdee shackles with safety bolt Material Safety Factor Finish Certification : : : : bow and pin alloy steel, Grade 8, quenched and tempered MBL equals 5 x WLL hot dipped galvanized at no extra charges this product can be supplied with a works certificate, certificate of basic raw material, manufacturer test certificate and/or EC Declaration of Conformity : +5% forging tolerance on inside width and length

Note

G-6038 working diameter diameter diameter load bow pin eye limit a b c tons mm mm mm 120 95 95 215 width eye d mm 89 width inside e mm 144 length inside f mm 267 length length thickness weight bolt nut each h mm 440 i mm 50

g mm 530

kg 110

1 2 3 4In inch

5width eye d inch317

working diameter diameter diameter load bow pin eye limit a b c tons inch inch inch120 3 3/4 3 3/4 815

width inside e inch511

length inside f inch1017

length

length thickness weight bolt nut each h inch17 5/16

6 7 8 9 10 11 12 13 14 15 16

g inch20 7/8

i inch131

lbs243

/32

/32

/16

/32

/32

19

Shackles

Green Pin Sling Shacklesbow shackles with safety bolt Material Safety Factor Finish Temperature Range Certification : : : : : bow and pin alloy steel, Grade 8, quenched and tempered MBL equals 5 x WLL shackle bow painted silver, pin painted green -20 C up to +200 C at no extra charges this product can be supplied with a works certificate, certificate of basic raw material, manufacturer test certificate, EC Declaration of Conformity and all shackles are supplied with a Lloyds Register of Shipping Certificate on proof load, a MPI certificate and US inspection certificate 5% forging tolerance on inside width and lengthwidth eye d mm 45 55 70 85 89 100 110 122 145 160 170 190 200 220 240 260 280 width inside e mm 80 85 105 130 140 150 170 185 220 250 275 300 325 350 380 430 460 length inside f mm 200 250 290 365 390 480 540 600 575 680 740 750 850 850 855 930 950 width bow g mm 140 160 186 220 250 276 300 350 370 450 490 540 554 584 614 650 680 h mm 331 396 467 569 627 744 842 926 964 1107 1207 1257 1395 1454 1497 1620 1710 length length bolt i mm 252 304 359 428 441 474 528 594 686 763 828 878 959 1040 1116 1193 1278 j mm 235 270 345 410 455 508 600 620 715 810 913 993 986 1050 1176 1275 1350 width thickness bearing nut k mm 38 45 54 64 50 50 60 70 80 90 100 100 110 120 120 150 160 surface l mm 97 100 120 150 170 205 240 265 320 340 370 400 420 440 460 530 560 kg 22 50 67 105 160 220 320 350 635 803 980 1260 1430 1650 2120 2400 3600 weight each

P-6033

Note

working diameter diameter diameter load limit a tons 40 55 75 125 150 200 250 300 400 mm 55 60 70 85 94 110 126 135 160 170 190 200 218 242 260 285 295 b mm 51 57 70 80 95 105 120 134 160 180 200 215 230 255 270 300 320 c mm 109 115 140 155 180 200 228 245 295 330 350 392 420 466 490 510 550 body pin eye

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1620

500 600 700 800 900 1000 1250 1500

In inch

working diameter diameter diameter load limit a tons 40 55 75 125 150 200 250 300 400 500 600 700 800 900 1000 1250 1500 inch 2 5/32 2 3/8 2 3/4 3 3/8 3 3/4 4 5/16 5 5 5/16 6 /16 6 3/4 7 1/2 7 7/8 8 5/8 9 9/16 10 1/4 11 1/4 11 5/85

width eye d inch 1 2 2 3 3 3 4 4 5 6 6 7 7 8 9 10 1125 5 3 11 17 15

width inside e inch 3 3 4 5 5 5 6 7 8 9 10 11 12 13 15 16 1815 5 3 1 1

length inside f inch 8 9 11 14 15 18 21 23 22 26 29 29 33 33 33 36 377 7 3 3 3 7 1 5 5 3 1 1 1 1 5 5 3

width bow g inch 5 6 7 8 9 10 11 13 14 17 19 21 21 23 24 25 261 5 3 17

length

length bolt

width

thickness bearing nut surface l inch 3 4 4 6 6 8 9 10 12 13 14 15 16 17 18 20 221 1 5 3 5 3 9 3 1 7 3 3 13

weight each

body

pin b inch 2 2 2 3 3 4 4 5 6 7 7 8 9 10 10 11 125 7 5 1 3 5 3 1 3 5 5 1 7 1 1

eye c inch 49 17 17

h inch 13 15 18 22 24 29 33 36 38 43 47 49 55 57 /8 59 63 673 3 1 5 1 1 5 3 3

i inch 9 /8 /8 /8 /16 /16 /8 /2 /8 /2 /2 /4 12 14 16 17 18 20 23 27 30 32 34 37 41 44 /4 /8 47 503 5 5 3 1 7 3 15

j inch 9 10 /8 /8 /8 /16 /4 /8 13 16 18 20 23 24 28 31 /8 /8 /4 36 39 38 41 46 50 /8 537 3 5 1 1 5 3 1 7 1 5 5 1

k inch 1 1/2 1 3/4 2 1/8 2 1/2 2 2 /8 /8 /4 /8 2 3/8 2 3/4 3 1/8 3 9/16 4 4 /8 /8 /16 4 3/8 4 3/4 4 3/4 6 6 3/8 /4 /8 /8 /8

lbs 48.5 110 148 232 353 485 705 772 1400 1770 2161 2778 3153 3638 4674 5291 7937

/32 /32 /32 /8 /8 /8 /8 /8 /32 /16 /16 /32 /32

/32 /32 /4 /32 /32 /16 /16 /32 /32 /16 /32 /2 /8 /16 /16 /4

/32 /8 /8 /8 /32 /32 /32 /32 /16 /8 /8 /16 /4 /4

/8 /8 /8 /8 /8 /8 /4 /8 /8 /4 /8 /2 /2 /2 /8

/32 /16 /16 /16 /8 /8 /8 /4 /16 /4 /4 /4 /8

/16

/16 /4 /4 /2 /2 /8 /8 /8 /4 /16 /8 /8

/4 /4 /32 /4 /8 /4 /16 /16 /8 /8 /2 /8 /8 /8

4 5 6 7 7 9 9 11 13 13 15 16 18 19 20 21

5 5 11

1 1 7

17 29 23 9

7 7 7 3 9 3 1 1 7

11 5 1 1

11 3 3

5 25 23

5 5

11 7 7 13

5

25 7 9

23 1 7

3 3

11 9

11 7 1

/16 /8

/8 /8

/8 /4

/4 /8

/8

/8

11

/16

1

Shackles

Green Pin Super Shacklesbow shackles with safety bolt Material Safety Factor Standard Finish Certification : bow and pin alloy steel, Grade 8, quenched and tempered : MBL equals 5 x WLL : meets performance requirements of US Fed. Spec. RR-C-271 Type IVA Class 3, Grade B : hot dipped galvanized (175 ton shackle is painted) : at no extra charges this product can be supplied with a works certificate, certificate of basic raw material, manufacturer test certificate, EC Declaration of Conformity and all shackles starting from 150 tons are supplied with a Lloyds Register of Shipping Certificate on proof loadwidth inside e mm 22 27 31 36 43 47 51 57 60 74 83 105 127 144 165 length inside f mm 51 64 76 83 95 108 115 133 146 178 197 260 329 381 400 width bow g mm 32 43 51 58 68 75 83 92 99 126 138 180 190 238 275 length length bolt i mm 81 99 115 131 151 167 179 198 203 244 286 342 400 440 490 width thickness weight nut each j mm 63 79 94 107 124 137 154 170 183 226 264 339 371 416 485 k mm 11 17 20 23 25 28 31 34 19 24 27 33 40 50 60

G-5263working diameter diameter diameter width load bow pin eye eye limit a b c d tons mm mm mm mm 3.3 13.5 16 34 13.5 5 16 19 40 16 7 19 22 47 19 9.5 22 25 53 22 12.5 25 28 60 25 15 28 32 67 28 18 32 35 74 32 21 35 38 80 35 30 38 42 89 38 40 45 50 104 45 55 57 57 133 50 85 70 70 159 65 120 83 83 171 75 150* 95 95 215 89 175* 105 108 245 100* = round headed bolt

h mm 91 114 136 157 176 197 218 240 262 314 365 468 564 667 702

kg 0.44 0.79 1.26 1.88 2.78 3.87 5.26 6.94 8.79 15 22.0 42.0 70.0 112 160

1 2 3 4

In inch

5width inside e inch 7 /8 1 3/32 1 1/4 1 7/16 1 23/32 1 7/8 2 2 1/4 2 11/32 2 29/32 3 9/32 4 1/8 5 5 11/16 6 17/32 length inside f inch 2 2 17/32 3 3 9/32 3 3/4 4 1/4 4 17/32 5 1/4 5 3/4 7 7 3/4 10 1/4 12 15/16 15 15 3/4 width bow g inch 1 9/32 1 23/32 2 2 9/32 2 11/16 2 15/16 3 9/32 3 5/8 3 29/32 4 15/16 5 7/16 7 3/32 7 1/2 9 11/32 10 13/16 length length bolt i inch 3 3/16 3 29/32 4 17/32 5 5/32 5 15/16 6 19/32 7 1/32 7 25/32 8 9 19/32 10 19/32 13 15 3/4 17 5/16 19 9/32 width thickness weight nut each j inch 2 1/2 3 1/8 3 23/32 4 3/16 4 7/8 5 3/8 6 3/32 6 23/32 7 3/16 8 29/32 10 3/8 13 5/16 14 5/8 16 3/8 19 1/8 k inch lbs 7 /16 0.97 11 /16 1.74 25 /32 2.78 29 /32 4.14 1 6.13 1 1/8 8.53 1 1/4 11.6 1 11/32 15.3 3 /4 19.38 15 /16 33.07 1 3/32 48.50 1 5/16 92.59 1 19/32 154.32 2 246.92 2 3/8 352.74

working diameter diameter diameter width load bow pin eye eye limit a b c d tons inch inch inch inch 1 5 17 3.3 /2 /8 1 11/32 /32 5 3 5 5 /8 /4 1 19/32 /8 3 7 3 7 /4 /8 1 7/8 /4 7 7 9.5 /8 1 2 3/32 /8 2 11/32 1 12.5 1 1 1/8 15 1 1/8 1 1/4 2 5/8 1 1/8 18 1 1/4 1 3/8 2 29/32 1 9/32 21 1 3/8 1 1/2 3 5/32 1 3/8 30 1 1/2 1 5/8 3 1/2 1 17/32 40 1 3/4 2 4 1/8 1 25/32 55 2 1/4 2 1/4 5 1/4 2 85 2 3/4 2 3/4 6 1/4 2 9/16 120 3 1/4 3 1/4 6 3/4 2 15/16 150* 3 3/4 3 3/4 8 1/2 3 17/32 175* 4 4 1/4 9 5/8 3 15/16* = round headed bolt

6 7 8 9 10 11 12 13 14 15 16

h inch 3 19/32 4 1/2 5 11/32 6 5/32 6 29/32 7 3/4 8 9/16 9 7/16 10 5/16 12 11/32 14 3/8 18 3/8 22 3/16 26 9/32 27 5/8

21

Shackles

Green Pin Polar Shacklesbow shackles with safety bolt, for use under extreme climatic conditions Material Safety Factor Standard : bow and pin alloy steel, Grade 8, quenched and tempered : MBL equals 8 x WLL : EN 13889 and meets performance requirements of US Fed. Spec. RR-C-271 Type IVA Class 3, Grade B Finish : hot dipped galvanized Temperature Range : -40 C up to +200 C Certification : at no extra charges this product can be supplied with a works certificate, certificate of basic raw material, manufacturer test certificate and/or EC Declaration of Conformity Note : for shackles with WLL 55 and 85 tons the MBL equals 6 x WLLworking diameter diameter diameter width load bow pin eye eye limit a b c d tons mm mm mm mm 2 13.5 16 34 13.5 3.25 16 19 40 16 4.75 19 22 47 19 6.5 22 25 53 22 8.5 25 28 60 25 9.5 28 32 67 28 12 32 35 74 32 13.5 35 38 80 35 17 38 42 89 38 25 45 50 104 45 35 50 57 111 50 42.5 57 65 134 57 55 65 70 145 65 85 75 83 163 75 width inside e mm 22 27 31 36 43 47 51 57 60 74 83 95 105 127 length inside f mm 51 64 76 83 95 108 115 133 146 178 197 222 260 329 width bow g mm 32 43 51 58 68 75 83 92 99 126 138 160 180 190 length length bolt i mm 83 99 115 131 151 167 179 198 203 244 270 302 330 376 width thickness weight nut each j mm 63 79 94 107 124 137 154 170 183 226 250 287 329 355 k mm 13 17 20 23 25 28 31 34 19 24 27 30 33 40

G-5163

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1622

h mm 91 114 136 157 176 197 218 240 262 314 358 414 463 556

kg 0.42 0.74 1.18 1.77 2.58 3.66 4.91 6.54 8.19 14.22 19.85 28.33 39.59 62

In inch

working diameter diameter diameter width load bow pin eye eye limit a b c d tons inch inch inch inch 1 5 17 2 /2 /8 1 11/32 /32 5 3 5 3.25 /8 /4 1 19/32 /8 3 7 3 4.75 /4 /8 1 7/8 /4 7 7 6.5 /8 1 2 3/32 /8 2 11/32 1 8.5 1 1 1 /8 9.5 1 1 /8 1 1 /4 2 5/8 1 1/8 12 1 1 /4 1 3 /8 2 29/32 1 9/32 13.5 1 3 /8 1 1 /2 3 5/32 1 3/8 17 1 1 /2 1 5 /8 3 1/2 1 17/32 25 1 3 /4 2 4 1/8 1 25/32 35 2 2 1 /4 4 11/32 1 11/32 42.5 2 1 /4 2 9/16 5 9/32 2 1/4 55 2 1 /2 2 3 /4 5 3/4 2 9/16 85 3 3 1 /4 6 7/16 3 15/16

width inside e inch 7 /8 1 3/32 1 1/4 1 7/16 1 23/32 1 7/8 2 2 1/4 2 11/32 2 29/32 3 9/32 3 3/4 4 1/8 5

length inside f inch 2 2 17/32 3 3 9/32 3 3/4 4 1/4 4 17/32 5 1/4 5 3/4 7 7 3/4 8 3/4 10 1/4 12 15/16

width bow g inch 1 9/32 1 23/32 2 2 9/32 2 11/16 2 15/16 3 9/32 3 5/8 3 29/32 4 15/16 5 7/16 6 9/32 7 3/32 7 1/2

length

length bolt i inch 3 9/32 3 29/32 4 17/32 5 5/32 5 15/16 6 19/32 7 1/32 7 25/32 8 9 19/32 10 5/8 11 7/8 13 14 25/32

width thickness weight nut each j inch 2 1/2 3 1/8 3 23/32 4 3/16 4 7/8 5 3/8 6 3/32 6 23/32 7 3/16 8 29/32 9 13/16 11 5/16 12 15/16 14 k inch 17 /32 11 /16 25 /32 29 /32 1 1 1/8 1 1/4 1 11/32 3 /4 15 /16 1 3/32 1 3/16 1 5/16 1 19/32

h inch 3 19/32 4 1/2 5 11/32 6 5/32 6 29/32 7 3/4 8 9/16 9 7/16 10 5/16 12 11/32 14 3/32 16 5/16 18 1/4 21 29/32

lbs 0.92 1.62 2.59 3.9 5.69 8.06 10.81 14.42 18.06 31.34 43.77 62.46 87.27 136.69

Shackles

Green Pin Heavy Duty Polar Shacklesbow shackles with safety bolt, for use under extreme climatic conditions Material Safety Factor Finish : bow and pin alloy steel, Grade 8, quenched and tempered : MBL equals 5 x WLL : shackle bow painted silver, pin painted green (120 tons shackle is hot dipped galvanized) Temperature Range : -40 C up to +200 C Certification : at no extra charges this product can be supplied with a works certificate, certificate of basic raw material, manufacturer test certificate and EC Declaration of Conformity. All shackles starting from 150 tons are supplied with a Lloyds Register of Shipping Certificate on proof load Note : +5% forging tolerance on inside width and lengthworking diameter diameter diameter width load bow pin eye eye limit a b c d tons mm mm mm mm 120 95 95 215 89 150 105 108 245 100 200 120 130 288 110 width inside e mm 144 165 175 length inside f mm 381 400 500 width bow g mm 238 275 290 length length bolt i mm 440 490 520 width thickness weight nut each j mm 416 485 530 k mm 50 60 60

P-6031

h mm 667 702 854

kg 110 160 235

1 2 3 4In inch

5width inside e inch 5 11/16 6 17/32 6 29/32 length inside f inch 15 15 3/4 19 11/16 width bow g inch 9 11/32 10 13/16 11 7/16 length length bolt i inch 17 5/16 19 9/32 20 1/2 width thickness weight nut each j inch 16 3/8 19 1/8 20 7/8 k inch 2 2 3/8 2 3/8

working diameter diameter diameter width load bow pin eye eye limit a b c d tons inch inch inch inch 120 3 3 /4 3 3 /4 8 1 /2 3 17/32 150 4 4 1 /4 9 5 /8 3 15/16 200 4 3 /4 5 1 /8 11 11/32 4 5/16

6 7 8 9 10 11 12 13 14 15 16

h inch 26 9/32 27 5/8 33 5/8

lbs 243 353 518

23

Shackles

Green Pin Wide Mouth Towing Shacklesbow shackles with safety bolt Material Finish Certification Note : bow and pin alloy steel, Grade 8, quenched and tempered : hot dipped galvanized : at no extra charges this product can be supplied with a works certificate and/or certificate of basic raw material : only to be used for towing!

G-4263diameter diameter diameter width bow pin eye eye a mm 38 45 50 65 75 b mm 42 50 57 70 83 c mm 89 104 111 145 163 d mm 38 45 50 65 75 width inside e mm 106 127 146 165 184 length inside f mm 216 248 273 314 330 width bow g mm 159 175 207 213 254 length length bolt i mm 248 296 338 389 432 width thickness minimum weight nut breaking each load j k mm mm tons kg 235 19 132 12.5 265 24 180 18 307 27 240 25 343 33 330 48 404 40 600 70

h mm 319 370 411 487 530

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1624In inch

diameter diameter diameter width bow pin eye eye a inch 1 1/2 1 3/4 2 2 1/2 3 b inch 1 5/8 2 2 1/4 2 3/4 3 1/4 c inch 3 1/2 4 1/8 4 11/32 5 3/4 6 7/16 d inch 1 17/32 1 25/32 1 31/32 2 9/16 2 15/16

width inside e inch 4 3/16 5 5 3/4 6 1/2 7 1/4

length inside f inch 8 1/2 9 3/4 10 3/4 12 3/8 13

width bow g inch 6 9/32 6 7/8 8 5/32 8 3/8 10

length

length bolt i inch 9 3/4 11 11/16 13 5/16 15 5/16 17

h inch 12 9/16 14 9/16 16 3/16 19 3/16 20 7/8

width thicknessminimum nut breaking load j k inch inch tons 3 9 1/4 /4 132 15 10 7/16 /16 180 12 1/8 1 3/32 240 13 1/2 1 5/16 330 15 7/8 1 19/32 600

weight each

lbs 27.56 39.68 55.12 105.82 154.32

10 11 12 13 14 15 1625

Shackles1 2 3 4 5 6 7 8 9

Shackles

Green Pin Trawling Shacklesbow shackles with square headed screw pin Material Safety Factor Standard Finish Certification : : : : : bow and pin high tensile steel, Grade 6, quenched and tempered MBL equals 6 x WLL meets performance requirements of US Fed. Spec. RR-C-271, Grade A hot dipped galvanized at no extra charges this product can be supplied with a works certificate, certificate of basic raw material, manufacturer test certificate and/or EC Declaration of Conformity

G-4164working diameter diameter diameter width load bow pin eye eye limit a b c d tons mm mm mm mm 2 13.5 16 34 13.5 3.25 16 19 40 16 4.75 19 22 47 19 6.5 22 25 53 22 8.5 25 28 60 25 9.5 28 32 67 28 12 32 35 74 32 13.5 35 38 80 35 17 38 42 89 38 25 45 50 104 45 width inside e mm 22 27 31 36 43 47 51 57 60 74 length inside f mm 51 64 76 83 95 108 115 133 146 178 width bow g mm 32 43 51 58 68 75 83 92 99 126 length length bolt i mm 58 71 82 93 108 120 137 149 164 192 width width bolt head k mm 22 27 32 32 36 41 50 50 60 60 weight each

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1626

h mm 91 114 136 157 176 197 218 240 262 314

j mm 63 79 94 107 124 137 154 170 183 226

kg 0.34 0.63 1 1.44 2.21 3.18 4.32 5.67 7.36 12.38

In inch

working diameter diameter diameter width load bow pin eye eye limit a b c d tons inch inch inch inch 1 5 17 2 /2 /8 1 11/32 /32 5 3 5 3.25 /8 /4 1 19/32 /8 3 7 3 4.75 /4 /8 1 7/8 /4 7 7 6.5 /8 1 2 3/32 /8 8.5 1 1 1/8 2 11/32 1 1 1/4 2 5/8 1 1/8 9.5 1 1/8 12 1 1/4 1 3/8 2 29/32 1 9/32 13.5 1 3/8 1 1/2 3 5/32 1 3/8 17 1 1/2 1 5/8 3 1/2 1 17/32 25 1 3/4 2 4 1/8 1 25/32

width inside e inch 7 /8 1 3/32 1 1/4 1 7/16 1 23/32 1 7/8 2 2 1/4 2 11/32 2 29/32

length inside f inch 2 2 17/32 3 3 9/32 3 3/4 4 1/4 4 17/32 5 1/4 5 3/4 7

width bow g inch 1 9/32 1 23/32 2 2 9/32 2 11/16 2 15/16 3 9/32 3 5/8 3 7/8 5

length

length bolt i inch 2 9/32 2 25/32 3 1/4 3 11/16 4 1/4 4 3/4 5 3/8 5 7/8 6 1/2 7 9/16

width

h inch 3 19/32 4 1/2 5 3/8 6 3/16 6 7/8 7 3/4 8 19/32 9 7/16 10 5/16 12 11/32

j inch 2 1/2 3 1/8 3 23/32 4 3/16 4 7/8 5 3/8 6 3/32 6 11/16 7 1/4 8 7/8

width bolt head k inch 7 /8 1 3/32 1 9/32 1 9/32 1 7/16 1 5/8 1 31/32 1 31/32 2 11/32 2 11/32

weight each

lbs 0.75 1.39 2.21 3.17 4.86 7.01 9.52 12.49 16.23 27.29

Shackles

Green Pin Trawling Shacklesdee shackles with square headed screw pin Material Safety Factor Standard Finish Certification : : : : : bow and pin high tensile steel, Grade 6, quenched and tempered MBL equals 6 x WLL meets performance requirements of US Fed. Spec. RR-C-271, Grade A hot dipped galvanized at no extra charges this product can be supplied with a works certificate, certificate of basic raw material, manufacturer test certificate and/or EC Declaration of Conformity

G-4154 working diameter diameter diameter load bow pin eye limit a b c tons mm mm mm 2 13.5 16 34 3.25 16 19 40 4.75 19 22 47 6.5 22 25 53 8.5 25 28 60 9.5 28 32 67 12 32 35 74 13.5 35 38 80 17 38 42 89 25 45 50 104 width eye d mm 13.5 16 19 22 25 28 32 35 38 45 width inside e mm 22 27 31 36 43 47 51 57 60 74 length inside f mm 43 51 59 73 85 90 94 115 127 149 length length bolt h mm 58 71 82 93 108 120 137 149 164 192 width bolt head i mm 22 27 32 32 36 41 50 50 60 60 weight each

g mm 85 105 125 144 161 179 199 220 239 283

kg 0.32 0.58 0.92 1.33 2.03 2.88 3.96 5.24 6.8 11.22

1 2 3 4

In inch

5width eye d inch 17 /32 5 /8 3 /4 7 /8 1 1 1/8 1 9/32 1 3/8 1 17/32 1 25/32 width inside e inch 7 /8 1 3/32 1 1/4 1 7/16 1 23/32 1 7/8 2 2 1/4 2 11/32 2 29/32 length inside f inch 1 23/32 2 2 5/16 2 7/8 3 11/32 3 9/16 3 23/32 4 17/32 5 5 7/8 length length bolt h inch 2 9/32 2 25/32 3 1/4 3 11/16 4 1/4 4 3/4 5 3/8 5 7/8 6 1/2 7 9/16 width bolt head i inch 7 /8 1 3/32 1 9/32 1 9/32 1 7/16 1 5/8 1 31/32 1 31/32 2 11/32 2 11/32 weight each

working diameter diameter diameter load bow pin eye limit a b c tons inch inch inch 1 5 2 /2 /8 1 11/32 5 3 3.25 /8 /4 1 19/32 3 7 4.75 /4 /8 1 7/8 7 6.5 /8 1 2 3/32 8.5 1 1 1/8 2 11/32 1 1/4 2 5/8 9.5 1 1/8 12 1 1/4 1 3/8 2 29/32 13.5 1 3/8 1 1/2 3 5/32 17 1 1/2 1 5/8 3 1/2 25 1 3/4 2 4 1/8

6 7 8 9 10 11 12 13 14 15 16

g inch 3 11/32 4 1/8 4 29/32 5 11/16 6 5/16 7 1/32 7 13/16 8 11/16 9 3/8 11 5/32

lbs 0.7 1.28 2.03 2.93 4.48 6.35 8.72 11.56 15 24.74

27

Shackles

Green Pin Sunken Hole Shacklesbow shackles with square sunken hole screw pin Material Safety Factor Standard Finish Certification : : : : : bow and pin high tensile steel, Grade 6, quenched and tempered MBL equals 6 x WLL meets performance requirements of US Fed. Spec. RR-C-271, Grade A hot dipped galvanized at no extra charges this product can be supplied with a works certificate, certificate of basic raw material, manufacturer test certificate and/or EC Declaration of Conformity : key for unscrewing the pin must be ordered separately

Note G-4169

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1628P-4170

working diameter diameter diameter width load bow pin eye eye limit a b c d tons mm mm mm mm 2 13.5 16 34 13.5 3.25 16 19 40 16 4.75 19 22 47 19 6.5 22 25 53 22 8.5 25 28 60 25 9.5 28 32 67 28 12 32 35 74 32 13.5 35 38 80 35 17 38 42 89 38

width inside e mm 22 27 31 36 43 47 51 57 60

length inside f mm 51 64 76 83 95 108 115 133 146

width bow g mm 32 43 51 58 68 75 83 92 99

length

length bolt i mm 51 53 74 85 99 110 122 135 145

width

size hole k mm 10 10 10 12 12 16 16 16 16

weight each

h mm 91 114 136 157 176 197 218 240 262

j mm 76 93 107 123 141 158 176 192 208

kg 0.31 0.56 0.98 1.46 2.18 3.06 4.24 5.59 7.37

In inch

working diameter diameter diameter width load bow pin eye eye limit a b c d tons inch inch inch inch 1 5 17 2 /2 /8 1 11/32 /32 5 3 5 3.25 /8 /4 1 19/32 /8 3 7 3 4.75 /4 /8 1 7/8 /4 7 7 6.5 /8 1 2 3/32 /8 2 11/32 1 8.5 1 1 1 /8 9.5 1 1/8 1 1/4 2 5/8 1 1/8 12 1 1 /4 1 3 /8 2 29/32 1 9/32 13.5 1 3 /8 1 1 /2 3 5/32 1 3/8 17 1 1 /2 1 5 /8 3 1/2 1 17/32

width inside e inch 7 /8 1 3/32 1 1/4 1 7/16 1 23/32 1 7/8 2 2 1/4 2 11/32

length inside f inch 2 2 17/32 3 3 9/32 3 3/4 4 1/4 4 17/32 5 1/4 5 3/4

width bow g inch 1 9/32 1 23/32 2 2 9/32 2 11/16 2 15/16 3 9/32 3 5/8 3 7/8

length

length bolt i inch 2 2 3/32 2 29/32 3 11/32 3 29/32 4 5/16 4 13/16 5 5/16 5 3/4

width

size hole k inch 3 /8 3 /8 3 /8 1 /2 1 /2 5 /8 5 /8 5 /8 5 /8

weight each

h inch 3 19/32 4 1/2 5 3/8 6 3/16 6 7/8 7 3/4 8 19/32 9 7/16 10 5/16

j inch 3 3 11/16 4 1/4 4 7/8 5 9/16 6 1/4 7 7 9/16 8 3/16

lbs 0.68 1.23 2.16 3.22 4.81 6.75 9.35 12.32 16.25

Shackles

Green Pin Sunken Hole Shacklesdee shackles with square sunken hole screw pin Material Safety Factor Standard Finish Certification : : : : : bow and pin high tensile steel, Grade 6, quenched and tempered MBL equals 6 x WLL meets performance requirements of US Fed. Spec. RR-C-271, Grade A hot dipped galvanized at no extra charges this product can be supplied with a works certificate, certificate of basic raw material, manufacturer test certificate and/or EC Declaration of Conformity : key for unscrewing the pin must be ordered separately

Note G-4159

working diameter diameter diameter load bow pin eye limit a b c tons mm mm mm 2 13.5 16 34 3.25 16 19 40 4.75 19 22 47 6.5 22 25 53 8.5 25 28 60 9.5 28 32 67 12 32 35 74 13.5 35 38 80 17 38 42 89

width eye d mm 13.5 16 19 22 25 28 32 35 38

width inside e mm 22 27 31 36 43 47 51 57 60

length inside f mm 43 51 59 73 85 90 94 115 127

length

length bolt h mm 51 53 74 85 99 110 122 135 145

size hole i mm 10 10 10 12 12 16 16 16 16

weight each

g mm 85 105 125 144 161 179 199 220 239

kg 0.34 0.6 0.98 1.26 2.14 3.05 3.56 5.17 6.84

1 2 3 4

In inch

5width eye d inch 17 /32 5 /8 3 /4 7 /8 1 1 1/8 1 9/32 1 3/8 1 17/32 width inside e inch 7 /8 1 3/32 1 1/4 1 7/16 1 23/32 1 7/8 2 2 1/4 2 11/32 length inside f inch 1 23/32 2 2 5/16 2 7/8 3 11/32 3 9/16 3 23/32 4 17/32 5 length length bolt h inch 2 2 3/32 2 29/32 3 11/32 3 29/32 4 5/16 4 13/16 5 5/16 5 3/4 size hole i inch 3 /8 3 /8 3 /8 1 /2 1 /2 5 /8 5 /8 5 /8 5 /8 weight each

P-4170

working diameter diameter diameter load bow pin eye limit a b c tons inch inch inch 1 5 /2 /8 1 11/32 2 5 3 /8 /4 1 19/32 3.25 3 7 /4 /8 1 7/8 4.75 7 /8 1 2 3/32 6.5 2 11/32 8.5 1 1 1/8 1 1/4 2 5/8 9.5 1 1/8 1 /4 1 3/8 2 29/32 12 1 1 1/2 3 5/32 13.5 1 3/8 1 /2 1 5/8v 3 1/2 17 1

6 7 8 9 10 11 12 13 14 15 16

g inch 3 11/32 4 1/8 4 29/32 5 11/16 6 5/16 7 1/32 7 13/16 8 11/16 9 3/8

lbs 0.75 1.33 2.15 2.77 4.72 6.72 7.84 11.4 15.08

29

Shackles

Mooring Shacklesbow shackles with screw pin Material Finish Note : mild steel, untreated, Grade 3 : self coloured : not to be used for lifting applications

S-1165 diameter bow a mm 32 38 45 50 65 diameter pin b mm 32 38 45 50 65 diameter eye c mm 74 89 104 111 145 width inside d mm 64 76 90 100 130 length inside e mm 134 160 189 210 273 width bow f mm 96 114 135 155 195 weight each

kg 4.2 7.8 12.5 17.4 35.6

1 2 3 4 5 6 7 8S-3557

Crown Shacklesdee shackles with round pin, for anchoring applications Material Finish Pin Note : : : : high tensile steel, normalized, Grade 4 self coloured to be fastened by welding non-standard dimensions upon request

9 10 11 12 13 14 15 1630

diameter bow a mm 13.5 16 19 22 28

diameter pin b mm 16 19 22 25 32

diameter eye c mm 34 40 47 53 67

width inside d mm 21 27 30 33 42

length inside e mm 49 61 67 73 91

weight each

kg 0.3 0.6 0.9 1.3 2.7

Shackles

Crown Shacklesdee shackles with round pin, for anchoring applications Material Finish Pin Note Certification : : : : : high tensile steel, normalized, Grade 4 self coloured to be fastened by welding non-standard dimensions upon request at no extra charges this product can be supplied with a works certificate and/or certificate of basic raw material

S-3559 diameter bow a mm 32 42 50 60 65 75 80 90 100 110 130 140 150 160 170 180 190 diameter pin b mm 35 45 52 68 72 80 90 100 110 125 140 150 160 170 180 190 200 diameter eye c mm 83 110 134 150 159 172 190 215 245 270 308 335 350 360 390 410 430 width inside d mm 47 60 73 90 100 110 125 140 155 175 200 210 220 235 250 270 280 length inside e mm 111 139 158 211 221 246 276 307 339 385 430 475 525 560 610 650 690 weight each

kg 4 8 13.3 25 32 50 65 94 127 178 269 335 413 500 601 716 839

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1631

Shackles

Shackles generally to DIN 82016 type Abow shackles with screw collar pin Material Safety Factor Standard Finish Certification : : : : : bow and pin high tensile steel, Grade 4 MBL equals 4 x WLL generally to DIN 82016 type A hot dipped galvanized or self coloured at no extra charges this product can be supplied with a works certificate and/or certificate of basic raw material

S-3461 G-3461

no.

8 10 12 16 20 25

working thickness thickness diameter diameter load bow bow pin eye limit a b c d tons mm mm mm mm 8 54 38 45 90 10 60 42 48 96 12 67 47 52 104 16 76 52 60 120 20 85 58 68 136 25 92 63 72 144

width inside e mm 60 66 73 81 90 100

length inside f mm 152 166 184 210 231 254

width bow g mm 93 102 114 128 140 155

weight each

kg 8.44 11 14.5 19.7 29.6 37.4

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1632S-3466 G-3466

Shackles generally to DIN 82016 type Bbow shackles with safety bolt Material Safety Factor Standard Finish Certification : : : : : bow and pin high tensile steel, Grade 4 MBL equals 4 x WLL generally to DIN 82016 type B hot dipped galvanized or self coloured at no extra charges this product can be supplied with a works certificate and/or certificate of basic raw material : with screw collar pin : up to size no. 25 with hand-grip : from size no. 32 width inside e mm 60 66 73 81 90 100 110 125 140 155 175 200 length inside f mm 152 166 184 210 231 254 285 315 360 395 447 500 width bow g mm 93 102 114 128 140 155 175 195 220 245 275 305 weight each

Note

no.

8 10 12 16 20 25 32 40 50 63 80 100

working thickness thickness diameter diameter load bow bow pin eye limit a b c d tons mm mm mm mm 8 54 38 45 90 10 60 42 48 96 12 67 47 52 104 16 76 52 60 120 20 85 58 68 136 25 92 63 72 144 32 100 70 80 160 40 107 79 90 180 50 120 88 100 200 63 135 96 110 220 80 150 110 125 250 100 165 125 140 280

kg 9.3 12 15.7 21 31.4 39.4 53.3 75.3 105 137 200 300

Shackles

Shackles generally to DIN 82101 type Adee shackles with screw collar pin Material Safety Factor Standard Finish Certification : : : : : bow and pin high tensile steel, Grade 4 MBL equals 4 x WLL generally to DIN 82101 type A hot dipped galvanized or self coloured at no extra charges this product can be supplied with a works certificate and/or certificate of basic raw material : shackle no. 0.1 will not have any markings as it is too small

Note S-3351 G-3351

no.

0.1 0.16 0.25 0.4 0.6 1 1.6 2 2.5 3 4 5 6 8 10 12 16 20 25

working thickness thickness diameter diameter load bow bow pin eye limit a b c d tons mm mm mm mm 0.1 5 4 5 10 0.16 6 5 6 12 0.25 8 7 8 16 0.4 10 8 10 20 0.63 12 10 12 24 1 15 13 16 32 1.6 19 17 20 40 2 21 19 22 44 2.5 23 21 24 48 3.15 26 24 27 54 4 29 27 30 60 5 33 30 36 72 6.3 37 34 39 78 8 41 38 45 90 10 45 42 48 96 12 50 47 52 104 16 55 52 60 120 20 61 58 68 136 25 67 63 72 144

width inside e mm 7 8 11 14 17 21 27 30 33 38 42 47 53 60 66 73 81 90 100

length inside f mm 15.5 18 24 30 36 49 61 67 73 83.5 91 111 119.5 139.5 147 158 185 211 221

weight each

kg 0.017 0.024 0.054 0.097 0.18 0.3 0.57 0.975 1.3 1.85 2.53 4 5.3 7.9 10 13.5 19.2 28 34

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1633

Shackles generally to DIN 82101 type Bdee shackles with counter sunk screw pin Material Safety Factor Standard Finish Certification : : : : : bow and pin high tensile steel, Grade 4 MBL equals 4 x WLL generally to DIN 82101 type B hot dipped galvanized or self coloured at no extra charges this product can be supplied with a works certificate and/or certificate of basic raw material : shackle no. 0.1 will not have any markings as it is too small length inside f mm 15.5 18 24 30 36 49 61 67 73 83.5 91 111 119.5 139.5 147 weight each

Note S-3352 G-3352 no.

0.1 0.16 0.25 0.4 0.6 1 1.6 2 2.5 3 4 5 6 8 10

working thickness thickness diameter diameter width load bow bow pin eye inside limit a b c d e tons mm mm mm mm mm 0.1 5 4 5 10 7 0.16 6 5 6 12 8 0.25 8 7 8 16 11 0.4 10 8 10 20 14 0.63 12 10 12 24 17 1 15 13 16 32 21 1.6 19 17 20 40 27 2 21 19 22 44 30 2.5 23 21 24 48 33 3.15 26 24 27 54 38 4 29 27 30 60 42 5 33 30 36 72 47 6.3 37 34 39 78 53 8 41 38 45 90 60 10 45 42 48 96 66

kg 0.014 0.023 0.052 0.093 0.173 0.29 0.543 0.95 1.23 1.8 2.6 3.8 5.2 7.6 9.7

Shackles

Shackles generally to DIN 82101 type Cdee shackles with safety bolt Material Safety Factor Standard Finish Certification : : : : : bow and pin high tensile steel, Grade 4 MBL equals 4 x WLL generally to DIN 82101 type C hot dipped galvanized or self coloured at no extra charges this product can be supplied with a works certificate and/or certificate of basic raw material : with screw collar pin : up to size no. 25 with hand-grip : from size no. 32 width inside e mm 14 17 21 27 30 33 38 42 47 53 60 66 73 81 90 100 110 125 140 155 175 200 length inside f mm 30 36 49 61 67 73 83.5 91 111 119.5 139.5 147 158 185 211 221 246 276 307 339 385.5 430 weight each

Note

no.

S-3356 G-3356

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1634

0.4 0.6 1 1.6 2 2.5 3 4 5 6 8 10 12 16 20 25 32 40 50 63 80 100

working thickness thickness diameter diameter load bow bow pin eye limit a b c d tons mm mm mm mm 0.4 10 8 10 20 0.63 12 10 12 24 1 15 13 16 32 1.6 19 17 20 40 2 21 19 22 44 2.5 23 21 24 48 3.15 26 24 27 54 4 29 27 30 60 5 33 30 36 72 6.3 37 34 39 78 8 41 38 45 90 10 45 42 48 96 12 50 47 52 104 16 55 52 60 120 20 61 58 68 136 25 67 63 72 144 32 74 70 80 160 40 84 79 90 180 50 93 88 100 200 63 101 96 110 220 80 115 110 125 250 100 130 125 140 280

kg 0.113 0.2 0.37 0.686 1.125 1.5 2.15 2.93 4.7 6.33 8.5 10.8 14.4 20.5 29.5 36 49 75 100 140 200 280

10 11 12 13 14 15 1635

Shackles1 2 3 4 5 6 7 8 9

Shackles

Yellow Pin Shacklesbow shackles with screw collar pin Material Standard Finish Note : : : : bow and pin high tensile steel, Grade 6 generally to US Fed. Spec. RR-C-271 hot dipped galvanized import quality

G-3161 working load limit tons 0.33 0.5 0.75 1 1.5 2 3.25 4.75 6.5 8.5 9.5 12 13.5 17 25 diameter bow a mm 5 6 8 10 11 13 16 19 22 25 28 32 35 38 45 diameter pin b mm 6 8 10 11 13 16 19 22 25 28 32 35 38 42 50 diameter eye c mm 14 16 19 23 27 30 38 46 53 61 68 76 84 92 106 width inside d mm 9.5 12 13.5 17 19 20 27 32 36 43 46 51 57 60 73 length inside e mm 22 29 31 37 43 48 60 71 84 95 108 119 133 146 177 width bow f mm 15 20 21 26 29 33 43 50 58 68 74 82 92 98 127 weight each

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1636G-3163

kg 0.03 0.05 0.09 0.14 0.17 0.33 0.62 1.07 1.64 2.28 3.36 4.31 6.14 7.81 12.61

Yellow Pin Shacklesbow shackles with safety pinMaterial Standard Finish Note : : : : bow and pin high tensile steel, Grade 6 generally to US Fed. Spec. RR-C-271 hot dipped galvanized import quality

working load limit tons 2 3.25 4.75 6.5 8.5 9.5 12 13.5 17 25

diameter bow a mm 13 16 19 22 25 28 32 35 38 45

diameter pin b mm 16 19 22 25 28 32 35 38 42 50

diameter eye c mm 30 38 46 53 61 68 76 84 92 106

width inside d mm 20 27 32 36 43 46 51 57 60 73

length inside e mm 48 60 71 84 95 108 119 133 146 177

width bow f mm 33 43 50 58 68 74 82 92 98 127

weight each

kg 0.36 0.76 1.23 1.79 2.57 3.75 5.32 7.19 9.44 15.4

Shackles

Yellow Pin Shacklesdee shackles with screw collar pin Material Standard Finish Note : : : : bow and pin high tensile steel, Grade 6 generally to US Fed. Spec. RR-C-271 hot dipped galvanized import quality

G-3151 working load limit tons 0.33 0.5 0.75 1 1.5 2 3.25 4.75 6.5 8.5 9.5 12 13.5 17 25 diameter bow a mm 5 6 8 10 11 13 16 19 22 25 28 32 35 38 45 diameter pin b mm 6 8 10 11 13 16 19 22 25 28 32 35 38 42 50 diameter eye c mm 14 16 19 23 27 30 38 46 53 61 68 76 84 92 106 width inside d mm 9.5 12 13.5 17 19 20 27 32 36 43 46 51 57 60 73 length inside e mm 27 22 26 32 37 41 51 60 71 81 90 100 111 122 146 weight each

kg 0.01 0.05 0.08 0.13 0.2 0.27 0.57 1.19 1.43 2.16 3.06 4.11 5.28 7.24 12.14

1 2 3 4

Yellow Pin Shacklesdee shackles with safety pin Material Standard Finish Note : : : : bow and pin high tensile steel, Grade 6 generally to US Fed. Spec. RR-C-271 hot dipped galvanized import quality

5 6 7 8

G-3153 working load limit tons 2 3.25 4.75 6.5 8.5 9.5 12 13.5 17 25 diameter bow a mm 13 16 19 22 25 28 32 35 38 45 diameter pin b mm 16 19 22 25 28 32 35 38 42 50 diameter eye c mm 30 38 46 53 61 68 76 84 92 106 width inside d mm 20 27 32 36 43 46 51 57 60 73 length inside e mm 41 51 60 71 81 90 100 111 122 146 weight each

9 10 11 12 13 14 15 1637

kg 0.34 0.67 1.14 1.75 2.52 3.45 4.91 6.24 8.4 14.26

Shackles

Shackles generally to B.S. 3032 table 3large bow shackles with screw collar pin S-2761 E-2761 G-2761 working load limit tons 0.15 0.45 0.75 1.25 2 2.75 3.75 4.75 5.75 7.25 8.5 9.5 11.5 13 15 18.5 20 25 30 35 40 50 65 80 diameter bow a mm 6 10 13 16 19 22 25 28 32 35 38 42 44 48 51 57 60 67 73 79 86 95 108 117 diameter pin b mm 10 13 16 19 22 25 28 32 35 38 44 48 51 54 57 63 67 73 79 86 92 102 117 127 diameter eye c mm 19 25 32 38 44 51 57 63 70 76 89 94 102 108 114 127 133 146 159 171 184 203 235 254 inside width d mm 13 16 22 28 35 41 44 51 57 63 70 76 86 92 98 105 111 121 133 146 159 171 197 216 inside length e mm 28 41 54 70 86 98 108 124 137 152 168 187 206 222 238 257 273 302 330 359 387 429 483 533 width bow f mm 19 25 32 41 51 57 64 73 83 89 98 111 121 130 140 152 162 178 197 213 229 254 286 308 weight each Material Safety Factor Standard Finish Certification : : : : : bow and pin alloy steel, EN14a MBL equals 4 x WLL generally to B.S. 3032 table 3 hot dipped galvanized, electro-galvanized or self coloured at no extra charges this product can be supplied with a works certificate and/or certificate of basic raw material

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1638

kg 0.12 0.18 0.37 0.72 1.20 1.85 2.61 3.78 5.17 6.46 8.34 11.1 14.5 17.8 25.5 34.4 36.8 45 62.2 81.8 95 131 194 274

Shackles

Shackles generally to B.S. 3032 table 4small bow shackles with screw collar pin S-2765 E-2765 G-2765 working load limit tons 0.2 0.5 1 1.5 2 3 4 5 6.25 7.5 9.25 10.5 12.5 14.25 16.5 18.5 20 25 30 35 40 50 65 80 diameter bow a mm 6 10 13 16 19 22 25 28 32 35 38 41 44 48 51 54 57 63 70 76 79 89 102 114 diameter pin b mm 10 13 16 19 22 25 28 32 35 38 44 48 51 54 57 60 63 70 79 86 89 98 114 127 diameter eye c mm 19 25 32 38 44 51 57 63 70 76 89 95 102 108 114 121 127 140 159 171 178 203 229 254 inside width d mm 13 16 22 28 35 38 44 51 57 60 67 73 79 86 92 95 105 114 127 137 143 159 184 206 inside length e mm 25 38 51 64 76 89 102 114 127 140 152 165 178 191 203 216 229 254 279 305 318 356 406 457 width bow f mm 16 22 29 38 44 51 60 67 76 83 89 98 105 114 121 127 137 152 168 184 191 213 244 273 weight each Material Safety Factor Standard Finish Certification : : : : : bow and pin alloy steel, EN14a MBL equals 4 x WLL generally to B.S. 3032 table 4 hot dipped galvanized, electro-galvanized or self coloured at no extra charges this product can be supplied with a works certificate and/or certificate of basic raw material

kg 0.11 0.17 0.35 0.66 1.06 1.68 2.47 3.48 4.79 5.95 7.55 9.79 12.5 15.3 21.8 28.9 30.9 37.8 52.6 69.5 78.1 109 163 235

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

39

Shackles

Shackles generally to B.S. 3032 table 2large dee shackles with screw collar pin S-2751 E-2751 G-2751 working load limit tons 0.25 0.5 0.75 1.5 2 3 3.75 5 6 7 9.5 11.25 13 14.25 16.25 18 20 25 30 35 40 50 65 80 diameter bow a mm 6 10 13 16 19 22 25 28 32 35 38 42 44 48 51 54 57 64 70 76 79 89 102 114 diameter pin b mm 10 13 16 19 22 25 28 32 35 38 45 48 51 54 57 60 64 73 79 86 89 102 114 127 diameter eye c mm 19 25 32 38 44 51 57 64 70 76 83 89 95 108 114 121 127 146 159 171 178 203 229 254 inside width d mm 13 19 28 32 38 44 51 54 60 67 70 76 83 92 98 105 108 121 133 146 149 171 191 219 inside length e mm 25 38 54 64 73 83 95 105 114 127 137 146 156 178 187 197 210 235 260 279 292 330 375 419 weight each Material Safety Factor Standard Finish Certification : : : : : bow and pin alloy steel, EN14a MBL equals 4 x WLL generally to B.S. 3032 table 2 hot dipped galvanized, electro-galvanized or self coloured at no extra charges this product can be supplied with a works certificate and/or certificate of basic raw material

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1640

kg 0.11 0.17 0.35 0.66 1.02 1.57 2.3 3.2 4.3 5.4 6.8 8.7 11 14.3 20 26.4 28.3 35 49 63.6 71.7 101 151 215

Shackles

Shackles generally to B.S. 3032 table 1small dee shackles with screw collar pin S-2755 E-2755 G-2755 working load limit tons 0.3 0.6 1 1.75 2.5 3.5 4.5 5.5 7 8 10.75 13 14.75 16.75 19 20 25 30 35 40 50 65 80 diameter bow a mm 6 10 13 16 19 22 25 28 32 35 38 42 44 48 51 54 60 64 70 73 83 92 102 diameter pin b mm 10 13 16 19 22 25 28 32 35 38 45 48 51 54 57 60 70 73 79 83 95 108 117 diameter eye c mm 19 25 32 38 44 51 57 64 70 83 89 95 102 108 114 121 140 146 159 165 190 216 235 width inside d mm 9.5 16 22 25 32 35 38 44 48 54 60 64 70 73 76 83 92 98 108 111 127 140 156 length inside e mm 22 35 48 57 70 83 92 105 114 127 140 149 162 171 184 197 219 229 254 264 298 333 368 weight each Material Safety Factor Standard Finish Certification : : : : : bow and pin alloy steel, EN14a MBL equals 4 x WLL generally to B.S. 3032 table 1 hot dipped galvanized, electro-galvanized or self coloured at no extra charges this product can be supplied with a works certificate and/or certificate of basic raw material

kg 0.1 0.16 0.31 0.59 0.98 1.55 2.2 3.1 4.2 5.1 6.6 8.1 10.5 13.3 19.2 22.4 25.3 31.5 47 60.2 68.5 98 147

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1641

Shackles

Fishing Shacklesbow shackles with square head screw pin and one attened eye Material Safety Factor Finish : high tensile steel : MBL equals 6 x WLL : painted red

P-3780h

g

c

working thickness thickness diameter diameter diameter load bow bow pin eye flattened limit eye a b c d e tons mm mm mm mm mm 2 16 13 16 31 26 4.75 25 19 22 46 34 6.5 29 22 25 53 43

width inside f mm 21 32 37

length inside g mm 44 65 71

width bow h mm 33 42 51

weight each

kg 0.36 1.06 1.60

f

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1642

b

a

e

d

Fishing Shacklesbow shackles with square sunken hole screw pin and one attened eye Material Safety Factor Finish : high tensile steel : MBL equals 6 x WLL : painted red

P-3790h

g

working thickness thickness diameter diameter diameter load bow bow pin eye flattened limit eye a b c d e tons mm mm mm mm mm

width inside f mm

length inside g mm

width bow h mm

size hole i mm

weight each

kg

c

2 4.75 6.5

16 25 29

13 19 22

16 22 25

31 46 53

26 34 43

21 32 37

44 65 71

33 42 51

10 12 12

0.30 0.93 1.46

fb

a

i

e d

Shackles

Fishing Shacklesdee shackles with square head screw pin and one attened eye Material Safety Factor Finish : high tensile steel : MBL equals 6 x WLL : painted red

P-3785working thickness thickness diameter diameter diameter load bow bow pin eye flattened limit eye a b c d e tons mm mm mm mm mm width inside f mm length inside g mm weight each

g

kg

c

2 4.75 6.5

16 25 29

13 19 22

16 22 25

31 46 53

26 34 43

21 32 37

41 60 71

0.36 1.06 1.60

f

b

1a

2 3e

d

4Fishing Shacklesdee shackles with square sunken hole screw pin and one attened eye

5 6

Material Safety Factor Finish

: high tensile steel : MBL equals 6 x WLL : painted red

7 8

P-3795 working thickness thickness diameter diameter diameter load bow bow pin eye flattened limit eye a b c d e tons mm mm mm mm mm 2 16 13 16 31 26 4.75 25 19 22 46 34 6.5 29 22 25 53 43 width inside f mm 21 32 37 length inside g mm 41 60 71 size hole h mm 10 12 12 weight each

9 10 11 12

g

c

kg 0.30 0.93 1.46

fb

a

13 14 15 1643

h

e d

Shackles

Fishing Shacklesbow shackles with square head screw pin Material Safety Factor Finish : mild steel : MBL equals 5 x WLL : painted blue

P-3764 working load limit tons 1.5 2.5 3 4 5 6.5 8 9 diameter bow a mm 13 16 20 22 25 28 32 36 diameter pin b mm 16 20 22 25 28 32 36 38 diameter eye c mm 32 40 48 53 60 67 71 76 width inside d mm 25 32 38 44 51 56 64 70 length inside e mm 48 64 79 87 100 114 126 140 width bow f mm 36 48 60 66 75 86 96 105 weight each

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1644P-3754

kg 0.37 0.71 1.24 1.68 2.42 3.42 4.85 6.32

Fishing Shacklesdee shackles with square head screw pin Material Safety Factor Finish : mild steel : MBL equals 5 x WLL : painted blue

working load limit tons 1.5 2.5 3 4 5 6.5 8 9

diameter bow a mm 13 16 20 22 25 28 32 36

diameter pin b mm 16 20 22 25 28 32 36 38

diameter eye c mm 32 40 48 53 60 67 71 76

width inside d mm 25 32 38 44 51 56 64 70

length inside e mm 48 64 75 83 100 104 120 131

weight each

kg 0.36 0.69 1.18 1.61 2.35 3.22 4.63 5.96

Shackles

Fishing Shacklesdee shackles with square head screw pin Material Finish Note : high tensile steel : self coloured : not to be used for lifting applications

S-3770 diameter bow a mm 14 16 20 22 diameter pin b mm 14 16 20 22 diameter eye c mm 29 32 38 46 width inside d mm 28 32 36 44 length inside e mm 56 64 60 88 weight each

a

e

b

d

c

kg 0.36 0.53 0.84 1.38

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1645

Shackles

Commercial Shacklesbow shackles with screw collar pin Material Finish Note : mild steel, untreated, Grade 3 : electro-galvanized or self coloured : not to be used for lifting applications

S-1161 E-1161 diameter bow a mm 5 6 8 10 11 12 14 16 20 22 25 28 32 38 45 50 57 65 diameter pin b mm 5 6 8 10 11 12 14 16 20 22 25 28 32 38 45 50 57 65 diameter eye c mm 10 12 16 20 22 24 28 32 40 44 50 56 64 76 90 100 114 130 width inside d mm 10 12 16 20 22 24 28 32 40 44 50 56 64 76 90 100 114 130 length inside e mm 20 24 32 40 44 48 56 64 80 88 100 112 128 152 180 200 228 260 width bow f mm 15 18 24 30 33 36 42 48 60 66 75 84 96 114 135 150 171 195 weight per 100 pcs kg 1.54 2.66 6.29 12.3 16.4 21.2 33.7 50.3 98.3 131 192 270 403 674 1120 1536 2276 3375

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1646S-1164

Commercial Shacklesbow shackles with square head screw pin Material Finish Note : mild steel, untreated, Grade 3 : self coloured : not to be used for lifting applications

diameter bow a mm 6 8 10 11 12 14 16 20 22 25 28 32 38

diameter pin b mm 6 8 10 11 12 14 16 20 22 25 28 32 38

diameter eye c mm 12 16 20 22 24 28 32 40 44 50 56 64 76

width inside d mm 12 16 20 22 24 28 32 40 44 50 56 64 76

length inside e mm 24 32 40 44 48 56 64 80 88 100 112 128 152

width bow f mm 18 24 30 33 36 42 48 60 66 75 84 96 114

weight per 100 pcs kg 2.7 6.4 12.5 16.6 21.6 34.3 51.2 100 133 195 275 410 686

Shackles

Commercial Shacklesbow shackles with counter sunk screw pin Material Finish Note : mild steel, untreated, Grade 3 : electro-galvanized or self coloured : not to be used for lifting applications

S-1162 E-1162 diameter bow a mm 8 10 11 12 14 16 20 22 25 diameter pin b mm 8 10 11 12 14 16 20 22 25 diameter eye c mm 16 20 22 24 28 32 40 44 50 width inside d mm 16 20 22 24 28 32 40 44 50 length inside e mm 32 40 44 48 56 64 80 88 100 width bow f mm 24 30 33 36 42 48 60 66 75 weight per 100 pcs kg 6 11.6 15.5 20.1 31.9 47.6 93.1 124 182

1 2 3 4

Commercial Shacklesdee shackles with screw collar pin Material Finish Note : mild steel, untreated, Grade 3 : electro-galvanized or self coloured : not to be used for lifting applications

5 6 7 8

S-1151 E-1151 diameter bow a mm 5 6 8 10 11 12 14 16 20 22 25 28 32 38 45 50 57 65 diameter pin b mm 5 6 8 10 11 12 14 16 20 22 25 28 32 38 45 50 57 65 diameter eye c mm 10 12 16 20 22 24 28 32 40 44 50 56 64 76 90 100 114 130 width inside d mm 10 12 16 20 22 24 28 32 40 44 50 56 64 76 90 100 114 130 length inside e mm 19 25 32 38 44 51 53 64 76 89 100 115 127 152 180 200 220 247 weight per 100 pcs kg 1.47 2.56 6.06 11.8 15.8 20.5 32.5 48.5 94.7 126 185 260 388 650 1080 1480 2192 3252

9 10 11 12 13 14 15 1647

Shackles

Commercial Shacklesdee shackles with square head screw pin Material Finish Note : mild steel, untreated, Grade 3 : self coloured : not to be used for lifting applications

S-1154 diameter bow a mm 6 8 10 11 12 14 16 20 22 25 28 32 38 diameter pin b mm 6 8 10 11 12 14 16 20 22 25 28 32 38 diameter eye c mm 12 16 20 22 24 28 32 40 44 50 56 64 76 width inside d mm 12 16 20 22 24 28 32 40 44 50 56 64 76 length inside e mm 24 32 40 44 48 56 64 80 88 100 112 128 152 weight per 100 pcs kg 2.6 6.17 12.0 16 20.8 33.1 49.4 96.4 128 188 265 395 661

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1648S-1152 E-1152

Commercial Shacklesdee shackles with counter sunk screw pin Material Finish Note : mild steel, untreated, Grade 3 : electro-galvanized or self coloured : not to be used for lifting applications

diameter bow a mm 8 10 11 12 14 16 20 22 25

diameter pin b mm 8 10 11 12 14 16 20 22 25

diameter eye c mm 16 20 22 24 28 32 40 44 50

width inside d mm 16 20 22 24 28 32 40 44 50

length inside e mm 32 40 44 48 56 64 80 88 100

weight per 100 pcs kg 5.72 11.2 14.9 19.3 30.7 45.8 89.5 119 175

Shackles

Commercial Shacklesdanlino V shackles with square head screw pin Material Finish Note : mild steel, untreated, Grade 3 : self coloured : not to be used for lifting applications

S-1170 diameter bow a mm 32 diameter pin b mm 32 diameter eye c mm 64 width inside d mm 78 length inside e mm 120 weight per 100 pcs kg 470

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1649

Thimbles

ApplicationsThimbles are used to protect steel wire rope, fibre rope or synthetic rope. They are available in various models and sizes. All indicated types of thimbles can be used in combination with the above mentioned types of ropes.

RangeVan Beest offers a wide range of thimbles, from nationally standardized models to all types of commercially available thimbles.

DesignThimbles can be cold-rolled, hot-rolled or die-cast, depending on the specific use of the thimbles.

FinishThe finish is either painted, electro-galvanized or hot dipped galvanized, unless otherwise specified.

2CertificationUpon request, all thimbles can be supplied with a works certificate.

Instructions for useIt is required that the thimbles are regularly inspected and the inspection should take place in accordance with the standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading with a consequence of deformation and or alteration of the steel structure. The dimensions of the thimbles must be so that the (wire) rope fits properly into the groove of the thimble. The nominal size of the thimble is the diameter of the (wire) rope with which it is intended to be used. For (wire) ropes of intermediate sizes, the next larger size of thimble must be used. Before use, check if the thimble is free from impurities, sharp edges, cracks or other irregularities which may damage the wire rope and therefore affect the strength or reliability of the wire rope.

50

Thimbles

Thimblesstandard commercial Material Finish Certification : mild steel : electro-galvanized : a works certificate can be supplied upon request

diameter rope E-6110 mm 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 26 28 30 32

width groove a mm 4 5 6 7 8 9 10 11 12 14 16 18 20 22 24 26 28 30 32

length

width

length inside d mm 16 22 26 32 34 38 42 48 51 57 60 67 76 83 88 102 110 115 140

width inside e mm 11 16 19 22 24 29 32 35 38 40 42 45 51 54 64 68 73 79 93

weight per 100 pcs kg 0.4 0.8 1.4 2 2.8 3 4.8 7.5 8 10 15 22 25 32 46 66 77 80 130

b mm 25 31 37 44 51 57 64 70 76 82 89 102 115 127 140 152 165 178 203

c mm 19 22 29 32 38 42 44 51 57 60 64 69 79 89 102 105 115 121 133

1 2 3 4 5

Thimblesheavy duty stub-end Material F