cover-mechanical & electrical statement - gcu...

GCU

MECHANICAL & ELECTRICALMECHANICAL & ELECTRICAL CAPABILITY STATEMENT CAPABILITY STATEMENT

Ge n e r a t i v e > C r e a t i v e > U

n i qu

e

QUALITYMANAGEMENT

SIRIM

MS ISO 9001 : 2000 REG. NO. AR 4335

QUALITYSYSTEM

Capability Statement GCU

Mechanical & Electrical GCU Consultants (M&E) Sdn Bhd E3A-03A, Neo Damansara, Jalan PJU 8/11, Bandar Damansara Perdana, 47820 Petaling Jaya, Selangor Darul Ehsan Contact Person : Narendran Naidu H/P No : 012 – 278 7974

Main Office GCU Consultants Sdn Bhd 3F-09, IOI Business Park, Bandar Puchong Jaya, 47170 Puchong, Selangor Darul Ehsan Tel : 03 – 8070 5501 Fax : 03 – 8070 5503 Contact Person : Ir EG Balakrishnan H/P No : 012 – 201 0434 Johor Office GCU Consultants (Johor) Sdn Bhd No.12-02, Jalan Molek 1/5C, Taman Molek, 81100 Johor Bahru, Johor Darul Takzim Tel : 07 – 350 7391 Fax : 07 – 350 7392 Contact Person : Ir Lee Kai Ming H/P No : 012 – 232 3806 Sabah Office GCU Consultants (Sabah) Sdn Bhd Lot B-11A-2, Block B, Pavilion Bundusan, Lorong Pavilion Bundusan 3, Jalan Bundusan, 88300 Penampang, Sabah Contact Person : Ir Amarjit Singh H/P No : 017 – 339 8479

Y:\1.0 CAPABILITY STATEMENT\4. M&E 2014\SECTION 1\2. BRANCH.doc


COMPANY PROFILE


PROFILE OF MAIN COMPANY

Name : GCU Consultants Sdn Bhd

Discipline : Geotechnical, Civil Infrastructural,

Structural and Mechanical & Electrical Engineering Consultancy

Registration No : 460942-T

Corresponding Address : Unit 3F-09, IOI Business Park, No.1 Persiaran Puchong Jaya Selatan, Bandar Puchong Jaya, 47100 Puchong, Selangor Darul Ehsan

Telephone : 03- 8070 5501

Facsimile : 03- 8070 5503

E-mail : [email protected]

Website : www.gcu.com.my

Year of Incorporation : 1998

Place of Incorporation : Kuala Lumpur

Paid-up Capital : RM1,000,000.00 Professional Indemnity : RM5,000,000.00 Insurance Coverage Bankers / Financiers : Public Bank Berhad Citibank Berhad

Ministry of Finance Registration : 465-00001892

Board of Engineers Registration : 523

Quality Management System : MS ISO 9001 : 2008; AR4335 (SIRIM) SME Corp Rating (SCORE) : 3 Star ( Year 2009)

Y:\1.0 CAPABILITY STATEMENT\4. M&E 2014\SECTION 1\3. PROFILE OF MAIN COMPANY.doc


Table of Contents Section 1 – Company Information 1. Introduction 2. Principals & Key Professionals 3. Organisation Chart 5. Software List 4. Certificates Section 2 – M & E Consultancy 1. Project Summary 2. Project Details 3. Project Profiles Section 3 – Curriculum Vitae (CV) 1. Ir Ulaganathan Eddikan 2. Ir T Prabakaran Rajah 2. Narendran Naidu

Company Profile GCU

SECTION 1

COMPANY INFORMATION

1. Introduction 2. Principals & Key Professionals 3. Organisation Chart 4. Software List 5. Certificates 6. Professional Indemnity Insurance Coverage


INTRODUCTION


INTRODUCTION GCU Consultants Sdn Bhd is a registered mechanical and electrical engineering consulting firm. GCU was established in the year of 1998. The firm and the key associate personnel have been successfully servicing the clients with a comprehensive range of mechanical electrical engineering consulting services. GCU is registered with the Board of Engineers Malaysia and Ministry of Finance Malaysia. GCU is also an ISO Certified by SIRIM and UKAS to MS ISO 9001: 2008 Quality Management Systems Standard. The foremost goal of the company is to provide quality, innovative and economical solutions for our clients. The strength of the firm lies with its well qualified and experienced staffs who are committed to achieving excellence in the profession. The Professional staff of GCU has the relevant capability and experience to undertake any major electrical engineering consultancy services. GCU has carried out numerous reputable jobs successfully contributing to the country’s development. We have a high frequency of repeat business indicating the client’s satisfaction in our services. GCU has the capability of providing an excellent range of mechanical and electrical engineering consultancy services such as Supervising, Designing, Erection, Testing and Commissioning, Operation and maintenance of power installation. GCU provide Supervising Engineers services for buildings such as factories, hotels, apartments, commercial buildings and etc as per Akta Bekalan Elektrik 447. Our areas of expertise and services provided are as follows :-

Electrical Services (High Voltage) • High Tension Electrical Substation and Reticulation (275kV132kV/33kV/11kV) • Protection Coordination Studies • 275kV/132kV/32kV/11kV Substation PMU/PPU/SSU Design • Authority Submissions and Liaisons

Electrical Services (Low Voltage)

• Low Tension Switching and Reticulation (415V) • Generator Set and AMF • PLC Electrical Control • Uninterruptible Power Supply System • Electrical Infrastructure Works • Street Lighting • Lightning Protection and Earthing System • Public Address System • Master Antenna Television System • Closed Circuit Television System • Intercom System • Security Access and Alarm System • Audio Visual and Conference System • Telephone and PABX System • Smart Home System


Fire Fighting System • Automatic Fire Sprinkler System • Foam Fire System • Wet and Dry Riser System • Hosereel System • CO2 Extinguish System • Energen/FM200 Gas Extinguish System • Kitchen Hood Automatics Extinguish System • Hi-Fog System • Fire Alarm & Detection System • Smoke Ventilation System • Pressurization System

Air Conditioning Services • Water Cooled Centrifugal Chiller System • Air Cooled Reciprocating Chiller System • Water Cooled Packaged Unit System • Air Cooled Split System

Other Specialist Services • Plumbing & Sanitary System • Central Vacuum System • Compressed Air System


PRINCIPALS & KEY PROFESSIONALS


PRINCIPALS & KEY PROFESSIONALS GCU has adequate technical manpower resources to undertake or support any major Electrical engineering consulting works (275kV to 11kV). The key professional staffs are :-

One (1) Director with professional and post graduate qualification in Electrical engineering.

Two (2) Associate with professional and post graduate qualification in Electrical engineering.

One (1) Engineering Manager with professional and post-graduate qualification.

Two (2) Electrical Engineers.

One (1) Mechanical Engineer.

Two (2) Technical Assistants.

One (1) Accountant responsible for all financial and administration of the firm.

Three (3) Supporting Staffs. Principals of the firm are :-

Ir ULAGANATHAN EDDIKAN (ELECTRICAL SERVICE 275kV ENGINEER)

As a Director of GCU, Ir Ulaganathan Eddikan has more than 21 years experience, in the field of electrical engineering.

He holds a Bachelor’s Degree in Electrical Engineering from University Malaya. Ir Ulaganathan currently is registered with S.T. and is an active electrical service

275kV engineer.

Ir T PRABAKARAN RAJAH (ELECTRICAL SERVICE 275kV ENGINEER)

As an Associate of GCU, Ir Praba has more than 20 years experience in the field of electrical engineering.

He holds a Honours Degree in Electrical & Electronic Engineering from United Kingdom

Ir Prabakaran currently is registered with S.T. and is an active electrical service 275kV engineer.

He holds Chartered Engineer from Institution Engineering Technology, UK.

ENG. NARENDRAN NAIDU

As an Associate of GCU, Eng. Narendran Naidu has more than 12 years experience in the field of electrical engineering.

He holds a Honours Degree in Electrical & Electronic Engineering from University of Tenaga Nasional, Malaysia.

Eng Narendran also holds a Masters Degree in Electrical Power Engineering from University Malaya, Malaysia.

He is registered with Board of Engineers and Institute of Engineers Malaysia under the electrical division.


ORGANISATION CHART


ORGANISATION CHART

CADManager

Receptionist

HR & Accounts

Quality (ISO)

Engineers Mechanical

Mechanical Associate

Engineers Electrical

Draftsman

Technical Assistants

Electrical Associate

Engineering Manager

Director

GCU M&E


SOFTWARE LIST


SOFTWARE

The firm is equipped with an excellent range of computer software to analyse even the most complex tasks in civil and geotechnical engineering. These computing power coupled with the judgement of the experienced engineers are vital in the analyses of the complex behavior of the civil and geotechnical structures. The available programs at present are: SAGE CRISP / PLAXIS (Version 9.01) Sage Crisp and Plaxis is a finite element program able to perform drained, undrained or fully coupled (Biot) consolidation analysis of two dimensional plane strain or axisymmetric solid bodies. The constitutive models included are homogeneous anisotropic linear elastic, non homogeneous isotropic linear elastic, linear elastic-perfectly plastic with Tresca, Von Mises, Mohr-Coulomb or Drucker-Prager yield criteria, Critical State based models - Cam Clay, Modified Cam Clay, and Schofield soil. WALLAP (Version 5.04) Wallap analyses a wide range of retaining wall problems including cantilevered walls, anchored walls and strutted excavations. It is suitable for the analysis of both temporary works, such as sheet pile walling, and permanent works such as reinforced concrete diaphragm walling and bored pile walls. Wallap offers conventional limit equilibrium analysis for calculation factors of safety, and also finite element analysis for calculating bending moments, displacements and strut forces. PIGLET (Version 5.1) PIGLET calculates settlement of a pile group or single pile under general loading conditions. Elastic closed form solutions for single piles and interaction factors for group. Linear variation of soil modulus with depth, separate modulus for axial and lateral loading. Piles can be raked in any direction.

SAFE Analysis and design of slab systems using the Finite Element method. SAFE is a software for integrated design of concrete slabs and basemats. SAFE is suitable to analyze and design slabs of arbitrary geometry and varying thickness, drop panels, openings with edge beams and embedded beams subjected to vertical point, line or surface loads. Column supports, wall supports, or soil supports for basemats can be modeled. Discontinuities in the slab system due to slip joints, or differences in slab elevations can also be included. WINSTABL (Version 3.0) WINSTABL is a fully integrated slope stability analysis program. It performs a two dimensional limit equilibrium analysis to compute the factor of safety for a layered slope using the modified Bishop, Janbu or spencer methods. It can handle heterogeneous soil system, anisotropic soil strength properties, reinforced slopes, nonlinear Mohr-Coulomb strength envelope, pseudo-static earthquake loading, surcharge boundary loads and automatic generation and analysis of circular, non circular and block-shaped failure surfaces. REPUTE (Version 2) Repute 2 provides a rich set of capabilities for engineers to design / analyse :Various types of single pile, using current and historical design standards (such as Eurocode 7 and BS 8004) Pile groups under generalized 3-dimensional loading, using linear and non-linear soil models. Repute considers single pile response using a variety of calculation methods for ultimate and serviceability limit states. Both traditional lumped factors-of-safety and modern partial factors can be applied in these calculations. Repute considers pile group behaviour using the boundary element method, employing the leading analytical program PGroupN (developed by and included under exclusive license from Geomarc). PGroupN provides a complete 3D non-linear boundary element solution of the soil continuum, which overcomes limitations of traditional interaction-factor methods and gives more realistic predictions of deformations and the load distribution between piles.

Y:\1.0 CAPABILITY STATEMENT\4. M&E 2014\SECTION 1\8. SOFTWARE LIST.doc


Y:\1.0 CAPABILITY STATEMENT\4. M&E 2014\SECTION 1\8. SOFTWARE LIST.doc

INHOUSE SPREADSHEET PROGRAMS Numerous inhouse spreadsheet programs have been developed by GCU to assist in voluminous repetitious nature of computational work and parametric studies. Spreadsheet programs for the following analysis/design are available: Single pile design for all types Stone Columns Cement Columns (Deep Cement

Mixing) Piled Embankment Settlement, Surcharge Preload & PVD Load Transfer Reinforcement Anchored Soil Wall Reinforced Concrete Wall Reinforced Modular Block Wall/Slope Rubble Wall Soil Nail Gravity Wall Liquefaction OCL foundation Reinforced Concrete Design Prestressed Concrete Design Steel Design Sewer Reticulation Design


ACHIEVEMENT CERTIFICATES


REGISTRATION CERTIFICATES


PROFESSIONAL INDEMNITY INSURANCE COVERAGE

Company Profile GCU

SECTION 2

ELECTRICAL CONSULTANCY

1. Project Summary

(Undertaken by GCU)

2. Project Summary (Undertaken by Principals)

3. Project Profiles

(Undertaken by GCU)

4. Project Profiles (Undertaken by Principals)


PROJECT SUMMARY (UNDERTAKEN BY GCU)


PROJECT SUMMARY (Undertaken by GCU)

Description of Project and

Location

Name and Address of Client

Name and Address of Architect or Consultant

Value of Contract* (RM)

Scope of involvement

PRIVATE CLIENTS REFERENCES

33kV/11kV 10,340,000.00

TNB SSU

Malaysian Airport Holdings Berhad GCU Consultant Sdn Bhd

Civil & Structure, Electrical & Mechanical

AF05 Navigation 14,000,000.00

Aids

Malaysian Airport Holdings Berhad GCU Consultant Sdn Bhd

Electrical (Air Craft Ground Lighting)

132kV/11kV 15,000,000.00

(PJ)

Factory Upgrade

Freescale Semiconductor Malaysia Sdn Bhd

GCU Consultants M&E Sdn Bhd

Electrical HV , engaged under Equipment Supplier

33/11kV Permanis Sdn Bhd 9,000,000.00

(Bangi) (Pepsi)

Factory Upgrade (TNB Shah Alam)



33/11kV 11,000,000.00

(Senawang)

Factory Upgrade

ONSemiconductor Malaysia Sdn Bhd (Site 1) TNB Seremban/PJ Timur

GCU Consultant Sdn Bhd


33/11kV 11,200,000.00

(Senawang)

Factory Upgrade

ONSemiconductor Malaysia Sdn Bhd (Site 2) TNB Seremban/PJ Timur



11kV 1,200,000.00

(Bangi)

Factory Upgrade

Crown Beverages Cans Malaysia Sdn Bhd (TNB Bangi/ TNB Shah Alam)


Electrical & Mechanical

11kV 2,000,000.00

(Shah Alam)

Factory Upgrade

APS Manja (Puteri) TNB SHAH ALAM


Electrical & Mechanical


Description of Project and

Location

Name and Address of Client

Name and Address of Architect or Consultant

Value of Contract* (RM)

Scope of involvement

TNB PROJECT REFERENCES

132kV/11kV TNB BERHAD GCU Consultants M&E

Sdn Bhd 19,400,000.00Kampung Repah

Civil & Structure, Electrical & Mechanical (Under Main Contractor)

132kV/11kV TNB BERHAD GCU Consultants M&E

Sdn Bhd 10,200,000.00Kuala Pilah

Civil & Structure, Electrical & Mechanical (Under Main Contractor)


PROJECT SUMMARY (UNDERTAKEN BY PRINCIPALS)


Project Summary – List of Completed Projects (Undertaken by Principals)

Item

Description of Works Clients Type of Building

1 Proposed Housing project at Lot PTD 7731-7734, Mukim Ulu Benut, Pontian Johor

Prairie Development Housing

2 Proposed Housing Project at Lot 2215 EMR 738 & 2216 EMR 737 Jalan Parit Masjid, Mukim Pontian Johor

Yusof Pembinaan Sdn Bhd

Housing

3 Proposed Housing Project at Lot MLO 2237, HS (D) 1238, Taman Sawit Kelapa Sawit, Kulai Johor

Kemajuan Wawasan Syahdu Sdn Bhd

Housing

4 Proposed Housing project at Taman Wawasan 1, Kawasan Endau – Rompin, Pahang

Prairie Development Sdn Bhd

Housing

5 Proposed Housing scheme at Lot 1016, 01018, 01021 & 1022, Mukim Seri Gading, Batu Pahat Johor

Tee Kim Seng Realty Sdn Bhd

Housing

6 Proposed Housing scheme at Lot 284 & 285, Mukim Jelutong, Daerah Johor

Gelang Emas Sdn Bhd Housing

7 Proposed Housing scheme at Taman Titiwangsa at Lot 6146, Mukim Kluang, Johor

Prairie Development Sdn Bhd

Housing

8 Proposed Housing project at Lot 6616 EMR 524, Jalan Kluang, Mukim Sri Gading, Daerah Batu Pahat, Johor

Koperasi Perumahan Kluang Sdn Bhd

Housing

9 Proposed Housing scheme at Lot 564, 598, 597, Mukim Seri Gading, Batu Pahat, Johor

Robert & Stanley Housing

10 Proposed Housing scheme at PTD 10649 – 13559, Mukim Ulu Benut, Johotr Darul Takzim

Prairie Development Housing

11 Proposed Housing scheme at Lot 780, Mukim Rompin, Pahang

Jambak Cemerlang Sdn Bhd

Housing

12 Proposed Housing project at Lot 1987, GM 1257, Parit Kongkong, Mukim Simpang Kanan, Daerah Batu Pahat, Johor

Jayafuda Development Sdn Bhd

Housing

13 Proposed Housing Project at Taman Bistari, Lot 1142, 1143 & 2549, EMR 2213, EMR 2214, EMR 1242, Jalan Bakri, Mukim Bakri, Muar Johor

Great Revenue Sdn Bhd Housing

14 Proposed Housing project at Lot 1521, EMR 3233, Mukim Minyak Beku, Batu Pahat, Johor

Robert Stanley Development

Housing

15 To Proposed turnkey project for TNB incoming at Mukim Kampung Panti, Kota Tinggi, Johor

LGM Properties Corporation Sdn Bhd

Housing

16 To design M&E Services for 672 unit 4 storey building at Lot PTD 2955 HS (D), 319674, Mukim Tanjung Kupang, Gelang Patah, Johor

Pelabuhan Tanjung Pelepas Sdn Bhd

Housing

17 Proposed Shophouses / Office at Lot 705, 706, 707, 708 & 709 Mukim Tangkak, Daerah Muar, Johor

Usomas Enterprise Sdn Bhd

Shop House

18 Proposed Development project at Ladang Sungai Lebak, Kota Tinggi Johor

Pertubuhan Peladang Negeri Johor

Estate

19 To design LV Infrastructure for TNB Incoming at Ladang Mamor, Kluang Johor

Palmol Plantations Sdn Bhd

Estate


Item


20 To design LV Infrastructure for TNB Incoming at Simpang Renggam, Johor

Eng Hoe Victory Plantation Sdn Bhd

Estate

21 To design LV Infrastructure for TNB Incoming at Ladang Pamol, Barat & Mill, Kluang Johor

Palmol Plantations Sdn Bhd

Estate

22 To design LV Infrastructure for TNB Incoming at Staff Quarters & Office at Lot 821, KM42, Jalan Kota Tinggi – Mersing, Daerah Kota Tinggi, Johor

Bousted Sedili Estate Sdn Bhd

Estate

23 To design M&E Services at Ladang Pelangi, Kahang, Kluang Johor

Tradewinds Plantation Berhad

Estate

24 To design M&E Servicves at Ladang Sungai Relai, Gua Musang, Kelantan

Tradewinds Plantation Berhad

Estate

25 To design Electrical services at Ladang Tereh Selatan Kluang, Johor

EPA Estate

26 To design Electrical Services at Loji Kumbahan Tanjung Kupang, Gelang Patah, Johor

Indah Water Sewage Treatment Plant (IWK)

Sewerage

27 To design Electtrical Services at Loji Kumbahan Lot 1955, 2604 & 1033, Jalan Idaman 1/3, Taman Perindustrian, Senai Johor


Sewerage

28 To design Electrical Services at Loji Kumbahan Jalan Denai 7, Taman Bukit Emas, Ulu Tiram, Johor


Sewerage

29 To design Electrical Services at Loji Kumbahan Jalan Lading 40, Taman Puteri Wangsa, Ulu Tiram, Johor


Sewerage

30 Proposed HT & LV Electrical Installation at PTD 178 & 179, Kampung Belukar Durian, Sedili Kecil Kota Tinggi, Johor

Aquabuilt Sdn Bhd Pond

31 Proposed Electrical Re – Wiring at Dewan Serbaguna Skudai, Johor

MPJB Multi Purpose

Hall 32 To design Electrical Installation at Multi

Purpose hall at Batu 24, Jalan Johor 81900 Kota Tinggi Johor

Shin Tao Kindergarden Multi Purpose

Hall

33 To design M&E Services at 4-storey showroom, Jalan Cenderawasih, Larkin, Johor Bahru, Johor

Mutiara Motor Sdn Bhd Showroom

34 To design M&E Services at Lot 2554, jalan raya Saleng, 81400 Senai, Johor

Wang Loo Motor Sdn Bhd Showroom

35 To design M&E Services for Mcdonalds UTM Skudai, Johor

Golden Arches Restaurants Sdn Bhd

Restaurant

36 To design M&E Services for Mcdonalds Taman Sutera, Johor Bahru, Johor


Restaurant

37 To design M&E Services for Mcdonalds Seri Alam, Mukim Plentong, Masai, Johor


Restaurant

38 Proposed Extension Building at PTD 6772, Block C, Jalan Kempas, Johor Bahru, Johor

Venture Technology Factory c/w

Office 39 To design M&E Services for Extension Building

at No.16, PTD (63153), Jalan Bistari 4, Taman Industri Jaya, Skudai, Johor

Lee Heng High Precision Factory c/w

Office

40 Proposed HT & LV Installation at Lot PTD 111513, Batu 15 ½, Jalan Sungai Tiram, Johor

MMI Precision Manufacturing S/B

Factory c/w Office


Item


41 To design HT Installation at PTD 43010, Jalan Murni II, Senai Johor

VS Industry Berhad Factory c/w

Office 42 To design HT Installation at Keck SEng

Refiney, Pasir Gudang, Johor Keck Seng (M) Sdn Bhd

Factory c/w Office

43 To design M&E Services at PLO 195, Jalan Cyber 8, Kawasan Perindustrian Senai IV, Senai Johor

Asia Paca Jaya Sdn Bhd Factory c/w

Office

44 To design M&E Services at Lot 6 (PT 56738) Jalan 31/56, Kota Kemuntiong, Seksyen 31, 40460 Shah Alam, Selangor

H&T Industries (KL) Sdn Bhd

Factory c/w Office

45 To design HT Installation for proposed upgrading project at PLO 526, Jalan Keluli 3, Kawasan Perindustrian Pasir Gudang, Johor

Komag USA (M) Bhd Factory c/w

Office

46 To design LV Installation for upgrading TNB supply at Kawasan Perindustrian Tebrau II, Johor Bahru, Johor

Frontier Food (M) Sdn Bhd

Factory c/w Office

47 To design Fire protection services at 3 Storey Factory at PLO 576 (Zon 12), Jalan Keluli 9, Kawasan Perindustrian Pasir Gudang, Mukim Plentong, Daerah Johor Bahru, Johor

Edo Chemical Sdn Bhd Factory c/w

Office

48 To design M&E Services at 1 unit Factory Lot 248, Jalan Seelong, 81400 Senai, Johor

PCI Professional Canning Industries Sdn Bhd

Factory c/w Office

49 To design LV Infrastructure for TNB Incoming at Nusa Cemerlang Industrial Park, Gelang Patah, Johor

Unibase Concrete Industries Sdn Bhd

Factory c/w Office

50 To design Electrical Services at Single Storey Factory at Senai Industrial Estate (Block C)

Owens Illinois Plastic Pte Ltd

Factory c/w Office

51 To design Electrical Services at Single Storey Factory with Double Storey Ofice at Senai Industrial Estate (Block D)

Owens Illinois Plastic Pte Ltd

Factory c/w Office

52 To design M&E Services at 1 storey of Factory with 2 storey office at Lot PT 50804, Jalan Wasasn 1/KU7, Taman Sungai Kapar Indah, Jalan Kapar. 42009, Kapar, Selangor

Yick Hoe Metal Industries Sdn Bhd

Factory c/w Office

53 To design M&E Services at Lot 1563, Jalan Dewani, Kawasan Perindustrian Temenggong, Johor Bahru, Johor

Mohm Chemical Sdn Bhd Factory c/w

Office

54 To design M&E Services at 2 unit Factory Lot 752, (Kawsaan Perindustrian Pasir Gudang), Mukim Plentong, Daerah Johor Bahru, Johor

BIG Indusrial Gas Sdn Bhd

Factory c/w Office

55 To design M&E Services at Nadi Eltra Sdn Bhd (Shimano Components)

Nadi Eltra Sdn Bhd Factory c/w

Office 56 To design M&E Services at Segamat Panel

Boards, SDegamat Johor Segamat Panel Boards

Factory c/w Office

57 To design M&E Services at PTD 65706 & 65707, Jlaan Hasil, Kawasan Perindustrian Jalan Hasil, 81200 Johor Bahru, Johor

Sukano Sdn Bhd Factory c/w

Office

58 To design M&E Services at Lot 10710, Jalan Kampung Air Putih, Jalan Sawah, Mukim Jeram Batu, Pekan Nenas, Daerah Pontian, Johor

Benithem Sdn Bhd Factory c/w

Office


Item


59 To design M&E Services at PTB 10497, Jalan Padu, Kawasan Perindustrian Tampoi, 80350 Johor Bahru, Johor

Mega Jourder Industries Sdn Bhd

Factory c/w Office

60 To design M&E Services at Lot PTD 2006451, Jalan Bukit 28, Taman Perindustrian Masai, Bandar Baru Seri Alam, Mukim Plentong, Johor

Dakshina Bharath (M) Sdn Bhd

Factory c/w Office

61 To design M&E Services at Plo 225, Kawasan Perindustrian Tebrau III, Mukim Tebrau, Daerah Johor Bahru, Johor

Tong Lee Hardware & Timber Sdn Bhd

Factory c/w Office

62 To design M&E Services at Lot 154371, Kawasan Perindustrain Nusajaya 1 (NIP 1), Bandar Nusajaya, Mukim Pulai, Daerah Johor Bahru, Johor

HG Metal Manufacturing Sdn Bhd

Factory c/w Office

63 To design M&E Services at Plo 780, Jalan Keluli 9, Kawasan Perindustrian Pasir Gudang, Mukim Plentong, Daearah Johor Bahru, Johor

Ranama Resources Sdn Bhd

Factory c/w Office

64 To design M&E Services at PTD 140216, Taman Perindustrian Berjaya, Jalan Kempas Lama, 81200 Johor Bahru

Ice-Man Sdn Bhd Factory c/w

Office

65 To design M&E Services at Lot 18 (pTD 152685) Kawasan Perindustrian Nusajaya, Mukim Pulai, Daerah Johor Bahru, Johor

Panelzone Sdn Bhd Factory c/w

Office

66 To design HT Installation for proposed upgrading project at Lot 30, Jalan Delima 1/3, Subang Hi-Tech Industrial Park, 40000 Shaha Alam, Selangor

Digi Telecommunications Sdn Bhd

Office Building

67 To design M&E Services at Proposed Transit Warehouse & Office at Lot 30462, Jalan Kempas Baru, Mukim Tebrau, Daerah Johor Bahru, Johor

Anugerah Sensasi Sdn Bhd / Tiong Nam Logistic

Warehouse c/w Office

68 To design M&E Services for 17 unit warehouse at Plot D 11, PTD 2423, Pelabuhan Tanjung Pelepas, Gelang Patah, Johor

Pelabuha Tanjung Pelepas Sdn Bhd


69 To design M&E Services at PTD 175189, Mukim Plentong, Johor

Yock Hoe Metal Industries Sdn Bhd


70 To design M&E Services at 3 units of Warehouse with 2 storey Office at Lot 5032, Batu 26, Jalan Johor, Mukim Jeram Batu, Daerah Pontian, Johor

Profitlane Sdn Bhd Warehouse c/w

Office

71 To design M&E Services at Lot 49, Jalan Kota Tinggi – Johor Bahru, Ulu Tiram, Johor

Benua Optima Sdn Bhd Warehouse c/w

Office 72 To design M&E Services at 2 storey of

warehouse with 2 storey office Lot 1502, Jalan Dewani, 81100 Johor Bahru

Broadlink Logistic Sdn Bhd


73 To design M&E Services at Storey of Factory with 4 storeyu office at Lot PTD 10710, Mukim Jeram Batu, Pekan Nenas, Pontian , Johor

Benithem Sdn Bhd Warehouse c/w

Office

74 To design M&E Services at Lot 49, Jalan Johor Bahru – Kota Tinggi, Ulu Tiram, Mukim Plentong, Daerah Johor Bahru, Johor

Benua Optima Sdn Bhd Warehouse c/w

Office


Item


75 To design M&E Services at Lot 50805, HS (D) 114154, Jalan Wawasan 1/KU7, Taman Sungai Kapar Indah, Jalan Kapar, 42209, Kapar, Klang, Selangor

Yick Hoe Metal Industries Sdn bhd


76 Design, tendering & job supervision for water front project at Tanjung Purun, Wilayah Persekutuan Labuan, Sabah

Lembaga Pembangunan Labuan

Jetty

77 To design M&E Services for Hua Yan Temple at Lot PTD 74510, Mukim Plentong, Taman Gaya, Johor

Persatuan Buddha Hua Yan

Temple

78 To design M&E Services for Mc Donalds Restaurant at Lot next to Plaza Tasek, Taman Tun Aminah, Johor Bahru, Johor

Golden Arches

Restaurants Sdn Bhd

Restaurant

79 To design M&E Services for Mcdonalds Restaurant at Lot 1001, Taman Bukit Indah, Mukim Pulai, Johor (Opposite Jusco Bukit Indah)

Golden Arches

Restaurants Sdn Bhd

Restaurant

80 To design M&E Services for Mcdonalds Restaurant at Lot 19827, Mukim Tebrau, Ulu Tiram, Johor (Next to Tiram Mart)

Golden Arches

Restaurants Sdn Bhd

Restaurant

81 To design M&E Services for Mcdonalds Restaurant at Lot PTD 8797, Lapangan Terbang Antarabangsa Sultan Ismail, Senai Johor

Golden Arches

Restaurants Sdn Bhd

Restaurant

82 To design M&E Services for Mcdonalds Restaurant at Lot next to Universiti Tun Hussein Onn (KUITHO) Batu Pahat, Johor

Golden Arches

Restaurants Sdn Bhd

Restaurant

83 To design M&E Services at Lot 16 PTD 5749, Kawasan Perindustrian Bandar Nusajaya, Mukim Jelutong, Daerah Johor Bahru, Johor

EIK Engineering Sdn Bhd

Factory c/w

Office

84 To design M&E Services at PLO 201, Kawasan Perindustrian Segamat, Mukim Pagoh, Daerah Segamat, Johor

Segamat Panel Boards

Sdn Bhd Phase 2

Factory c/w

Office

85 To design M&E Services at Lot 25945 (PTD 57000), Mukim Tebrau, Daerah Johor Bahru

Weng Sun Car Welding &

Agency Sdn Bhd

Factory &

Office


Item


86

To design M&E Services at Lot 10710, Jalan Kampung Air Putih – Jalan Sawah, Mukim Jeram Batu, Pekan Nenas, Daerah Pontian, Johor

Benithem Sdn Bhd

Phase 2

Factory &

Office

87 To design M&E Services at Lot 22461 (PTB 18838), Jalan Datin Halimah – Jalan Tampoi, 80350 Johor Bahru, Johor

Tiong Nam NGV Kiosk

NGV Station


PROJECT PROFILE (UNDERTAKEN BY GCU)


Project Title : Development of New LCC Terminal and Associated Works at KL International Airport AF05 (Navigation Aids) Client : Malaysia Airports Holdings Berhad Estimated M&E Cost : RM14,000,000.00 Scope of Works :- Provide two (2) new ILS/DME including Glide Path (GP/ILS) and new Localizer (LLZ/ILS)

for Category 1 Instrument Landing System Including Control and Monitoring System and all associated facilities for both end of New Runway including new Remote Control Monitoring System. To provide new DVOR/DME at its associated equipment at the new designated location and the contractor to propose the most optimum site to be designated for the relocation


Project Title : Consultancy Services for Power Station Upgrade 33kV TNB SSU for Client on Semiconductor Lot 122, Senawang Industrial Estate, 70450 Seremban, Negeri Sembilan (Stesen Suis Utama) Site 1 & Site 2 Client : SCG Industries Malaysia Sdn Bhd “On Semiconductor” Total Cost : RM20,000,000.00 Scope of Works :- Initial conceptual design drawings for 33/11kV electrical main single line and substation

layout plan. Obtaining approval from TNB for the upgrade of 33kV/11kV Intake with proposed new

33kV TNB SSU building Bomba, Majlis and Suruhanjaya on subsequent approvals

Provide detailed design on building M&E works for 33kV TNB SSU compromising lighting,

small power, air conditioning, mechanical ventilation and fire fighting services. Provide detailed design on 33Kv TNB SSU building for electrical earthing and lighting

protection systems Provide HV Cabling Routing Plans:-

HV Cablings Route from 33kV Consumer Room to Distribution Transformers HV Cabling Route from Distribution Transformers to 11kV New Consumer

Switchgear and from 11kV New Consumer Switchgear to 11kV Existing Consumer Switchgear Panels.

Provide detail design for NER (neutral earth resistor), differential / standby / restricted

earth fault relay alogorithms and transformer / switchgear protection schemes. Provide adequate transformer size based on client’s requirement and provide optimum

and effective design to cater both interest e.g. TNB requirement and client’s expectation. Ensure TNB electrical 33kV intake is supplied on time based on coordination with suitable

appointment main contractor.


PROJECT PROFILE (UNDERTAKEN BY PRINCIPALS)


HG METAL MANUFACTURING SDN.

BHD., JOHOR BAHRU.

PANELZONE SDN. BHD.

JOHOR BAHRU.

YICK HOE LOT 49 (PHASE 1),

JOHOR BAHRU


YICK HOE LOT 49 (PHASE 2),

JOHOR BAHRU

OWEN ILLINOIS, TPM PARK

JOHOR BAHRU

XIN HWA TRADING & TRANSPORTS,

JOHOR BAHRU


SUKANO (KSK), JLN HASIL,

JOHOR BAHRU

HOCK HENG AUTO SPARE & TRADING,

JOHOR BAHRU

TONG LEE HARDWARE & TIMBER SDN.

BHD., JOHOR BAHRU


MCDONALDS TAMAN SUTERA, JOHOR BAHRU.

MCDONALDS SKUDAI,

JOHOR BAHRU.

MCDONALDS SERI ALAM,

JOHOR BAHRU.


MUTIARA MOTOR, LARKIN,

JOHOR BAHRU

LACE MOTOR (PASIR GUDANG

HIGHWAY)

JOHOR BAHRU.

HONDA SHOWROOM,

KULAI, JOHOR.

Company Profile GCU

SECTION 3

CURRICULUM VITAE

1. Ir Ulaganathan Eddikan

2. Ir T Prabakaran Rajah

3. Narendran Naidu


Ir ULAGANATHAN EDDIKAN

Ir. Ulaganathan Eddikan Curriculum Vitae

1 of 4

Present Position : Director Nationality : Malaysian Year of Birth : 1968 Qualification

Bachelor’s Degree (Hons) Electrical, University Malaya. Professional Engineer, Malaysia

Affiliation

Member of Institution of Engineers, Malaysia Member of Association of Consulting Engineers, Malaysia

Certificates

Competent Electrical Engineer 33kV from Suruhanjaya Tenaga Malaysia. Competent Chargeman B4 33KV from Suruhanjaya Tenaga Malaysia. Competent Wireman PW4 from Suruhanjaya Tenaga Malaysia. Competent Electrical Energy Manager from Suruhanjaya Tenaga Elektrik Malaysia. Competent Steam Engineer Grade 2 from JKKP (DOSH) Putrajaya. Advance Electrical certificate (MLVK) from Kementerian Sumber Dan Manusia. Intermediate Electrical Certificate (MLVK) from Kementerian Sumber Dan Manusia. Basic Electrical Certificate (MLVK) from Kementerian Sumber dan Manusia. Succeeding from Engineer to Manager certificate from CPD Advancement Centre. Supervisor special skill certificate (FMM) from Persatuan Pekilang – Pekilang MAL. B40 Advance configuration certificate from (ABB). D40 ABB Master service certificate from (ABB). FESTO Dactic LC4 E331 certificate from Festo Malaysia. DC Converter TYRAK 73 certificate from ABB. Sami Star Frequency converter with vector control certificate from ABB. C20 Master view 800 programming and operation certificate from ABB. B20 Master piece 200 programming and operation certificate from ABB. Electrical Safety certificate from – EEM Advancement centre PTE LTD

Trainings

First aid ST John ambulance Malaysia certificate. Two days training course on Maintenance & Testing of Electrical Power Equipment conducted by EEM Advancement Centre.

Two days training course on maintenance of DC Plant conducted by TYCO Electronics.

Two days training course on Identification and Resolution of Harmonics Interference in Building Electrical Systems conducted by Power Quality Engineering.

Four days training course on Air-conditioning System – Air Cooled conducted by Institute Latihan Perindustrian Kuala Lumpur.

One day training course on Product familiarization of HT Switchgear conducted by Ranhill EPE Services.

Four days training course on Generator Testing Procedures, DC Power Overview and TOC Design Guidelines conducted by Bechtel international.

Four days training course on Advanced Microsoft Excel2003 and Automated Task with Microsoft Excel (Visual Basic Application – VBA) conducted by MCSB.


2 of 4

Two days training course on Electrical power Distribution System conducted by Comfori.

Three days training course on lightning and lightning protection conducted by CFC. Professional Experience NETWORK FACILITIES MANAGEMENT

To achieve and maintain TOC’s facilities services availability at 100% at all time. To ensure zero electrical power down time (0% operation error). To ensure all equipment in UMOBILE are operation in 24 hrs x 7 days. To set KPI for staff. Equipments space planning. Strategic planning for capacity and future growth for Data centers. Technical support for new Data Centers To ensure Designs adhere to Umobile Data Center Standards. To define non-functional requirements such as availability, scalability, maintainability,

reusability requirements on each project. Knowledge of the engineering behind Data Centers including knowledge of

supporting modern technology focused on efficiencies in power & Cooling (Cold & Hot Aisle)

To designing Rows with Focus on Densification of Racks To coordinate of the schedule preventive maintenance High Precision AirCond to

have better performance on cooling Data Centers Distribution Proficient in drafting and Space Programming Proven Cross Organization Communications Experience in Structured Cabling on network cables & power cables of data centre.

REPORTING MANAGEMENT

To report daily, monthly, quarterly, yearly PM & CM for all facilities elements as per PM master schedule.

Management nationwide rectifier, standby battery, aviation obstruction light and ACDB change-outs program.

Reporting on department budget expenses status. Reporting on TOC power consumption and fuse/breaker assignment. Reporting on nationwide TOC’s achievement. Arrange, organize and conduct shutdown for routine tests and maintenance. Update CMSS and create docket for fault based on level, services and component. Assist PMU to perform power measurement, fuse/breaker/sockets assignment at

site. Provide SOW and costing and support procurement and evaluation for tender of new

Systems/works Reporting on PM every 2nd of the month, must consist of PM adherence, Discrepancy clearance/tracker, fault statistic & analysis, PM tracker, fault status tracker, fault trend and distribution.

Report on fuse & breaker inventory based on 5 years forecast. Reporting on monthly power reports to management & SFD for record. Reporting on Work permit control & approval for power request.


3 of 4

STAFF MANAGEMENT

To ensure the Station is manned 24 hours x 7 days and manpower requirement to be utilized efficiently. To train all staff on TOC’s facilities and meet the International benchmark Standard.

CONTRACT MANAGEMENT

Establishing maintenance contracts for TOC’s facility element nationwide. To coordinate new Project Management on new Data Centre.

PROJECT MANAGEMENT

To carry out nationwide TOC’s improvement projects.

TRAINING MANAGEMENT

FFSS training for the elements for regional TOC. Local TOC Knowledge training for chargemen in the regional TOC. Training for upgrading restricted chargemen for regional TOC.

AUDIT

Perform periodic audit on the documentations and conditions of TOC facility elements nationwide.

INTERNAL & EXTERNAL CUSTOMER / SUBSCRIBER SATISFACTION

To respond or feedback to all customers’ enquiries within 10 minutes, and enquiries are handled Courteously (Dare to care). And develop appositive department image.

Liaison with Local authorities such as TNB, Bomba, JBE etc on renewal of licence and certificate for regional TOC

GENERAL (ISO REQUIREMENT

Generate standard maintenance guidelines and procedures including work instruction, check-sheets, KPI, Master Maintenance Schedule, PM trackers, quality indicators as per QMS16 for TOC nationwide.


4 of 4

FINANCIAL MANAGEMENT & SPECIAL ASSIGNMENT

Project Manager for BTS energy saving (power factor correction) – registered average 17% saving on TNB electricity bill.

Project Manager for TOC maintenance contracts consolidation – registered cost

saving RM1.2mil (2007 total contract value RM4.5mil against 2006 total contract value RM5.7mil).

Project Manager for TOC DC batteries change–out program (RM2.7mil).

Project manager for TOC surge suppressor N+1 system upgrade projects

(RM1.3mil).

Project Manager for TOC SCADA System design implementation-Survalent Technology (RM5mil).

Project Manager for building energy saving project for central TOCs-RM200K

recorded saving in year 2005.

Worked with an external consultant (BECHTEL International) for 10 weeks as a team member audited TOC M&E facilities.

Designed user requirements for Site Facilities online System (SFOS); an internal

software application keeping track of facilities inventory at all TOC.

Design user requirements for Network Resource Management System ( NRMS) on plant maintenance module; SAP system to standardize and control Maxis processes and information capture.

Upgrade 2 HT Power feeder with HT Transformer (RM 6mil).

Establish Maintenance contract for nationwide TOC’s (RM4.3mil)

MANAGEMENT COURSES / FORUMS

Stress Management Self Management Managing People Management Negotiation Skills Managing Non-performance Change Management Problem solving and decision making Performance Management Presentation Skills Risk Assessment & Change Management Business Strategy & Resource Management Business Accounting & Asset Management Crisis Management & Business Continuity (BCP)


Ir T PRABAKARAN RAJAH

Ir.T.PRABAKARAN RAJAH Curriculum Vitae

1 of 5

Present Position : Associate Consultant Nationality : Malaysian Year of Birth : 1970 Qualification

Nottingham Trent University (1988-1992) Bachelor of Electrical & Electronic Engineering - BEng (Hons.)

Herriot Watts University (2007-2009) Post Graduate Msc in Project Management (Construction Management).

Affiliation

Corporate member with Institution of Engineers Malaysia (IEM) since 1999 and Graduate member since 1993

Registered Professional Engineer with Board of Engineers Malaysia (BEM) since

2000 and Graduate member since 1992. Registered Competent Electrical Engineer (up to 275kV Voltage system) with

Suruhanjaya Tenaga Malaysia (STM) since 2001. Registered GBI (Green Building Index) Facilitator for purpose of providing the service

of acquiring classification of Index for New and Existing Construction Building in Malaysia. Member with Malaysian Green Building Confederation (MGBC) No. GBIF/0321 since Sept 2010

Certified Energy Manager (CEM) for Energy Efficiency projects with Suruhanjaya

Tenaga Malaysia (STM) since 2010 Registered Electrical Service Engineer (up to 275kV Voltage system) with

Suruhanjaya Tenaga Malaysia (STM) since 2010 Registered Chartered Engineer with Institution of Engineering Technology (IET), UK

since 2011.


2 of 5

WORK EXPERIENCE From October 1992 to September 1994

Joined GEC Malaysia Sdn Bhd (currently known as Mahkota Engineering & Power System Sdn Bhd) in October1992 as a Design Engineer in the Power System Division. Job scope involves in the field of design schemes associated with Relay Protection and Control systems for both Substations and Power Generation Stations.

Principle job functions includes:- a) Preparing Tenders proposals for Relay and Control panels for both Power Station

and Substation projects. b) Inviting quotation, evaluation equipment as per specification and verifying various forms

of calculation to conform the relevant standards and principles. c) Preparation of design schemes for relay protection and Control systems for High

Voltage Substation i.e. 275kV, 132kV, 66kV and 33kV system. d) Supervision of CAD drafting works before submission approval to Client. e) Perform Functional, commissioning and testing of Relay Protection and Control panels as

well as site modification works involving both Outdoor and Indoor Equipment before energisation.

Project Execution :-

a) Peninsular Malaysia Transmission Development Project 1991 (JMK 25163). This Contract covers a complete turnkey execution works at locations :-

275/132kV Switching Station at Bedong. 275/132kV Substation at Bukit Tambun. 132/33/11kV Substation at Prai Industrial Estate, Juru. 132/22/11kV Substation at Slim River.

b) 132kV GIS TNB HQ & DCA Subang Substation. This Contract covers the supply of a complete protection relay and control panels including Local Control Cubicle (LCC) to the Main Contractor - Holec (GIS manufacturer). The total substation works covers of :-

Four 132kV Overhead Line feeders. Four 132kV Underground feeders. Four 132/33kV Transformer bays. Two 132kV Bus-Coupler and Bus-Section Bays.

c) Pergau Hydroelectric Project. This is a Hydroelectric Power Station project located at Jeli, Kelantan. The scope of work covers the supply, design and engineering of the Protection Relay and Disturbance Recorder panels to the Main Contractor - GEC Alstom (Electrical Contractor). This Outdoor GIS substation consists of :-

Four 275kV Overhead Line feeders. Four 275kV Underground Generators feeders. Four 275/33/11kV Three winding Transformer bays. One 275kV Bus-Coupler and Bus Section Bays. Four 275kV Generators Transformer feeders.


3 of 5

d) 33/11kV Tanjung Manis TPZ Substation No 1 & 2.

This Contract covers the supply, erection and commissioning of 33kV outdoor switchgears, 33/11kV transformers, ancillary equipment and civil works for the Sarawak Electricity Supply Corporation (SESCO). The total substation works covers of :-

Six 33kV Overhead Line feeders. Four 33/11kV Transformer bays. Two 33kV Bus-Section Bays. Twenty 11kV Outgoing feeders. Two 11kV Bus-Section Bays.

From September 1994 to Date Joined Transmission Technology Sdn Bhd (Engineering Department) in September 1994 as Electrical Engineer. Job scope involves in the area of design, inspection, field supervision of Substation Automation System, Telecommunication and Relay Control Protection equipment as well as associated HV switchyard equipment. In 1997, promoted to Senior Engineer position and was given opportunity to work together with Consultants like KTA Tenaga, TNEC (subsidiary of TNB), Black-Veatch International (BVI) and HydroQuebec with greater emphasis on project management, conceptual engineering, field-testing, commissioning works and preparation of live switching schedules before final energisation of a complete Substation and Transmission equipment. In 2000, promoted as Manager within the Engineering Department of the the Substation Division. Main responsibility covers completion of Substation turnkey projects. Principle job functions include :- a) Submission of a complete proposals which is inclusive of conceptual design,

construction, acceptance tests and final commissioning test before energisation. b) Evaluating the sub-contractor proposals on technical matters especially on design

calculation to suit the overall system requirements in-line with TNB Code of practice. c) Checking of design calculations for the outdoor substation equipment such as

configuration of Line parameters, System fault current, DC loading, Busbar design, Earthing system, CT calculation, Optical Budget Power Loss and others.

d) Preparation of working method for other alternative solution that meets the specification and requirements.

e) Preparation the layout drawings which includes equipment layout, protection & control schemes, telecommunication scheme, logic diagram and others.

f) Complete commissioning test for Current Transformer, Voltage Transformer, Circuit Breaker, Disconnect Switches Equipment Telecommunication, Relay, Control, Disturbance Recorder and Fault Locator Equipment.

g) Propose relay setting for all types of relays especially Main 1 and Main 2 Distance Relays.

h) Proposal for Power system studies utilising ATPDraw and EMTP (ElectroMagnetic Transient Programme) software

Project Execution :-

The scope of this project was to execute the implementation of 500kV Transmission Development System Network that spans across a distance of 520Km. The span begins from Gurun Substation (Kedah) right down to Port Klang Power Station in Selangor and further continues from Yong Peng East Substation right down to Pasir Gudang Power Station, both of which are located in the State of Johor which forms the Phase 1 & 1A of the Development of 1st 500kV Transmission system in Malaysia. Total value of project was RM 1.4 billion


4 of 5

a) 500kV Transmission Development System Project for Transmission and Substations Equipment Phase 1 & 1A.

This project covers a complete turnkey execution works at following locations: -

275kV Switching Station at Gurun, Junjong, Yong Peng (E) and Bukit Batu. 500/275kV Substations at Kapar and Bukit Tarek. 275kV Extension 2 nos feeder bays at Port Klang and Pasir Gudang Power

Stations. 500kV Transmission Tower energised at 275kV from Gurun to Bukit Tarek with

a distance 323 Km 500kV Transmission Tower energised at 500kV from Bukit Tarek to Kapar with

a distance 51 Km 275kV Transmission Tower energised at 275kV from Kapar to Port Klang

Power Station with a distance 5 Km. 500kV Transmission Tower energised at 275kV from Yong Peng to Pasir

Gudang with a distance 139 Km Complete PDH Telecommunication Transmission Network Equipment covering

from Gurun right down to Port Klang Power Station and continue further down to Pasir Gudang Power Station.

b) 275kV Transmission Development System Project for Sabah East-West

Transmission Grid The scope of this project was to execute the 275kV Transmission Development System between West Coast Grid and East Coast Grid for the State of Sabah The span covers 300km west to east of the State of Sabah. Since this would be the first and longest 275kV Transmission Line ever built for Sabah Electricity Sdn Bhd, compensation was taken into the design and implementation which requires special Reactors Banks and Static Var Compensators equipment to control the Mvar losses within Sabah East West Grids. Total value of project stands at RM 450 million. This scope of contract covers a complete turnkey execution works at locations :-

275/132kV Substations at Kolopis and Segaliud. 132kV Extension 2 nos feeder bays facing Kolopis Substation at Penampang

Substation. Repeater Station at Telupid to accommodate Telecommunication system. 275kV Transmission Tower energised at 275kV from Kolopis to Segaliud with

a distance of 300 Km 275kV Transmission Tower energised at 132kV facing Powertron

(Karambunai) and Kota Belud (Loop-in and Loop-out) at Kolopis Substation. 132kV Underground Cable from Kolopis to Penampang with distance of 8 Km Complete SDH STM-4 Telecommunication Project for the whole of Sabah for

Sabah Electricity Sdn Bhd. State Control Center for Sabah Electricity Sdn Bhd, Package 1:- Scada/EMS. Static Var Compensator 60Mvar to be located at 275kV Segaliud and at

132kV Dam Road Substations.


5 of 5

c) 275kV Salak South GIS Substation and 275kV (1000 MVA) Transmission Line / Cable Pantai to Salak South Substation

This contract was awarded to Consortium Partner (KHIM) made up of Koperasi Polis, Hg Corporation, Isoplus and MRCB. MRCB scope involves implementation of 275kV Hybrid System Transmission line-Underground cable (oil-filled) between Salak South and Pantai Substations capable of transmitting 1000 MVA power on each circuit. Both stations, 275kV GIS Switching Station at Salak South and 275kV GIS Extension Bays at Pantai Substation incorporates installation of Primary equipment together with necessary remote and local control relay modification and Telecommunication equipment. The current scope of work covers a complete turnkey execution works at locations:-

275kV GIS Substation at Salak South. 275kV GIS Extension 2 nos feeder bays facing Salak South Substation at

Pantai Substation. 275kV Hybrid Transmission line Underground energised at 275kV from Pantai

to Salak South Substation with a distance of 20 Km 275kV Transmission line Loop-in and Loop-out between Serdang and Pudu

Ulu Substation Remote Relay modification works at Pantai, Serdang and Pudu Ulu

Substations SDH Telecommunication Network system.

List of the completed projects as follows:-

Tanjung Pelepas Railway project – Communication and Signalling.

132kV Genting Highlands Substation – Maintenance and Calibration of Relays

275kV Teluk Panglima Substation – Design of primary switchyard for IPP.

Enhance Digital Transmission Network throughout Peninsular Malaysia –

installation of OPGW for existing ‘Live’132kV Transmission Lines.

Electrified Double Track Rawang to Ipoh - Permit To Work for line crossings.

Smart Tunnel Project - Permit To Work for line crossings

KL Flood Mitigation - Permit To Work for line crossings.

Monthly Bank Inspection of 60 branches - Maybank.

Monthly Factory and Hypermarket Inspection of 15 branches

Calibration of Protection relays for Oil and Gas, Power & Electronic Industries.

Services of Transformers for Oil and Gas, Power & Electronic Industries.

Monthly Inspection of 22kV, 11kV and 6.6KV installation for Syarikat Air Johor

(SAJ) Water Utility Provider for State of Johor.

Design review and approval of 600MVA 275/33kV for Bahru Steel Large Power

Consumer at Tanjung Langsat Industrial Complex (TLIC).

Petronas Melaka and Gebeng installation - Maintenance and Calibration of Relays


NARENDRAN NAIDU

Narendran Naidu a/l Ravindran Naidu Curriculum Vitae

1 of 2

Present Position : Associate Director Nationality : Malaysian Year of Birth : 1980 Qualification

Masters in Electrical Energy and Power System (Hons) in University Malaya 2011 CGPA 3.05 out of 4.0 Bachelor of Electrical and Electronic Engineering (Hons) University Tenaga Nasional

2002, CGPA 2.8 out of 4.0 SPM : Grade 1 with 6A’ (11 Aggregates) 1997

Affiliation

Registered with Board of Engineers, Electrical Division

WORK EXPERIENCE

Senior Electrical Engineer, GCU Consultant Sdn Bhd Duration (August 2010 till present)

Senior Electrical Engineer, NWN Engineering Sdn Bhd Duration (July 2008 till July 2010) 2 years Senior Electrical Engineer, Ranhill Bersekutu Sdn Bhd Duration (December 2003 till June 2008) 4 years 6 months Electrical Engineer, KTA Tenaga Sdn Bhd Duration (August 2002 till July 2003) 1 year 3 months Process Engineer, Polymatech Sdn Bhd Duration (May 2002 till July 2002) 3 months

BUILDING SERVICES PERMANIS SDN BHD (PEPSI)

Design consultancy for structural,electrical and mechanical services,from 33KV to 415V. Includes authority submission to TNB, Majlis and Bomba.Design of 33KV Substation (TNB SSU)

ON SEMICONDUCTOR SITE 1 Design consultancy for structural, electrical and mechanical services, from 33KV to

415V.Includes authority submission to TNB,Majlis and Bomba. Design of 33KV Substation. (TNB SSU)

ON SEMICONDUCTOR SITE 2 Design consultancy for structural,electrical and mechanical services, from 33KV to

415V. Includes authority submission to TNB, Majlis and Bomba. Design of 33KV Substation (TNB SSU)

HOSPITAL 650 BEDDED GOVERNMENT HOSPITAL. SERDANG

Preparation of preliminary design, Tender Document and Tender Drawings for High Voltage (1KV intake) and Low Voltage (ELV) services.

Narendran Naidu a/l Ravindran Naidu Curriculum Vitae

2 of 2

HIGH CLASS CONDOMINIUM, SURIA STONOR KLCC – 138 Units Design consultancy for structural, electrical and mechanical services, from 11KV 415KV.Includes authority submission to TNB,Majlis and Bomba. Design of 11KV Substation (TNB SSU) SUPER HIGH CLASS CONDOMINIUM AT JALAN MADGE – 40 UNITS (COMPLETED PROJECT) Design consultancy for structural, electrical and mechanical services, from 11KV To 415V. Includes authority submission to TNB,Majlis and Bomba. Design of 11KV

Substation (TNB SSU) HIGH RISE OFFICE BUILDING AT JALAN BINJAI – 36 STOREYS

Design consultancy for structural, electrical and mechanical services,from 33KV to 415V.Includes authority submission to TNB, Majlis and Bomba.Design of 33KV Substation (TNB SSU) WOMEN AND CHILD HOSPITAL – 12 STOREY (preliminary studies) Preparation of preliminary Design Concept (have completed a detail study on the Surrounding supply electrical demand upon coordination with TNB, 33KV intake).

TOWNSHIP DEVELOPMENT BANDAR MAHKOTA CHERAS – TOWNSHIP (COMPLETED PROJECT) 1,500 ACRES

Design review on electrical demand for entire township.This requires full coordination With local electrical distributor for the Sub-stations to generate electrical supply to all Apartment units,Bungalow to commercial shop-lots. Design of street lighting and telephone services for all phases. This requires full Coordination with local authorities to obtain approval of designed plans.

POWER PLANT PROJECTS –TELUK SLAUT COMBINED CYCLE CONVERSION PROJECT – 1900MW (COMPLETED PROJECT)

Design of electrical systems for building services within the plant, eg. Steam Turbine Building,Administration Building,External Compound Lighthing etc.

Design of 132KV Swithyard Power Plant Design review and coordination with Owner’s Engineer to Contractors. Attend site meeting and chair meetings in consult office Attend to site inquiries during implementations.

cover-mechanical & electrical statement - gcu...

Documents