craft instructions cardboard tube tiger - wibsey€¦ · cardboard tube tiger 1 9 7 5 3 first,...

Craft Instructions Cardboard Tube Tiger 1 9 7 5 3 First, paint the cardboard tube orange and allow to dry. Now, fold over the tabs on the head and leg templates. Carefully push the leg tabs through the slots and fold the tabs over. Secure with a little sticky tape. Next, carefully cut out the tiger templates. This can be a little tricky, so you may need an adult to help you. Make sure you don’t cut off the tabs! Finally, cut a piece of pipe cleaner to be your tiger’s tail. Fix the tail inside the other end of the tube using a little sticky tape. 2 8 6 4 Now take the tiger templates; you will need two sets of legs and a head. You can either use the pre- coloured ones or colour Next, carefully cut two slots into the underside of the tube, near each end, you may need an adult to help you. Next, put a little tape onto the head tab and fix inside one end of the tube. Once the orange tube is dry, draw or paint some black stripes all around it. Supplies – Small cardboard tube – Orange pipe cleaner – Tiger template – PVA glue – Orange and black paint – Paintbrush – Coloured pencils or felt- tip pens – Black felt-tip pen – Scissors – Sticky tape – Googly eyes (optional) in your own using coloured pencils or felt-tip pens. Then draw a face onto the tiger’s head using the black felt-tip pen. You could also stick some googly eyes on if you have them.

Upload: others

Post on 04-Oct-2020

4 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Craft Instructions Cardboard Tube Tiger

First, paint the cardboard tube orange and allow to dry.

Now, fold over the tabs on the head and leg templates.

Carefully push the leg tabs through the slots and fold the tabs over. Secure with a little sticky tape.

Next, carefully cut out the tiger templates. This can be a little tricky, so you may need an adult to help you. Make sure you don’t cut off the tabs!

Finally, cut a piece of pipe cleaner to be your tiger’s tail. Fix the tail inside the other end of the tube using a little sticky tape.

Now take the tiger templates; you will need two sets of legs and a head. You can either use the pre-coloured ones or colour

Next, carefully cut two slots into the underside of the tube, near each end, you may need an adult to help you.

Next, put a little tape onto the head tab and fix inside one end of the tube.

Once the orange tube is dry, draw or paint some black stripes all around it.

Supplies

– Small cardboard tube– Orange pipe

cleaner– Tiger template– PVA glue

– Orange and black paint– Paintbrush– Coloured

pencils or felt-tip pens– Black felt-tip

pen

– Scissors– Sticky tape– Googly eyes

(optional)

in your own using coloured pencils or felt-tip pens. Then draw a face onto the tiger’s head using the black felt-tip pen. You could also stick some googly eyes on if you have them.

Craft Instructions Cardboard Tube Tiger

Supplies

– Small cardboard tube

– Orange pipe cleaner

– Tiger template

– Orange and black paint

– Paintbrush– Coloured

pencils or felt-tip pens

– Black felt-tip pen

– PVA glue– Scissors– Sticky tape– Googly eyes

(optional)

twinkl.com

Craft Instructions Cardboard Tube Tiger

Step 1. First, paint the cardboard tube orange and allow to dry.

twinkl.com

Craft Instructions Cardboard Tube Tiger

Step 2. Now take the tiger templates; you will need two sets of legs and a head. You can either use the pre-coloured ones or colour in your own using coloured pencils or felt-tip pens. Then draw a face onto the tiger’s head using the black felt-tip pen. You could also stick some googly eyes on if you have them.

twinkl.com

Craft Instructions Cardboard Tube Tiger

Step 3. Next, carefully cut out the tiger templates. This can be a little tricky, so you may need an adult to help you. Make sure you don’t cut off the tabs!