created by santosh devbhandari bsc it (ii)

13
COLLEGE FOR PROFESSIONAL STUDIES COLLEGE FOR PROFESSIONAL STUDIES TOPIC OF PRESENTATION OPTICAL FIBRE

Upload: keelia

Post on 10-Feb-2016

37 views

Category:

Documents


2 download

DESCRIPTION

COLLEGE FOR PROFESSIONAL STUDIES. TOPIC OF PRESENTATION OPTICAL FIBRE. CREATED BY Santosh Devbhandari BSc IT (Ii). Contents. Introduction Types of fibers Transmission of light Optical fiber communication Advantages Disadvantages Conclusion. Introduction to Optical Fibers. - PowerPoint PPT Presentation

TRANSCRIPT

Page 1: CREATED BY Santosh Devbhandari BSc IT (Ii)

COLLEGE FOR PROFESSIONAL STUDIESCOLLEGE FOR PROFESSIONAL STUDIES

TOPIC OF PRESENTATION

OPTICAL FIBRE

Page 2: CREATED BY Santosh Devbhandari BSc IT (Ii)

Contents

Introduction Types of fibers Transmission of light Optical fiber communication Advantages Disadvantages Conclusion

Page 3: CREATED BY Santosh Devbhandari BSc IT (Ii)

Introduction to Optical Fibers

Fibers of glass. Usually 120 micrometers in diameter. Used to carry signals in the form of light over distances up to 50 km. No repeaters needed.

Optical fiber consists of : Core Cladding Buffer Coating

Page 4: CREATED BY Santosh Devbhandari BSc IT (Ii)

Type of FibersOptical fibers come in two types:

Single-mode fibers – used to transmit one signal per fiber.

Multi-mode fibers – used to transmit many signals per fiber.

Page 5: CREATED BY Santosh Devbhandari BSc IT (Ii)

Transmission of light

Total Internal ReflectionWhen the light goes from slow to fast, as the angle of incidence is increased, the angle of refraction increases as well, until it reaches 90.

The angle of incidence when this happens is called the “critical angle.”

Beyond the critical angle, no refraction is possible and the light is said to ‘totally internally reflect.’

Angle ofIncidence iGreater than ic

Page 6: CREATED BY Santosh Devbhandari BSc IT (Ii)

Total Internal Reflection in Fiber

Page 7: CREATED BY Santosh Devbhandari BSc IT (Ii)

Optical fiber Communication

Fiber Optics Relay Systems has Transmitter Optical Fiber Optical Regenerator Optical Receiver

is a method of transmitting information from one place to another by sending light through an optical fiber. the wave forms an electromagnetic carrier wave that is modulated to carry information.

Page 8: CREATED BY Santosh Devbhandari BSc IT (Ii)

Optical fiber Communication

TransmitterProduces and encodes the light signals

Optical ReceiverReceives and decodes the light signals

Optical RegeneratorBoosts the light signals

Optical fiber: Connects the light signals over a distance

Page 9: CREATED BY Santosh Devbhandari BSc IT (Ii)

Advantages of Optical fiber

Less signal degradation Light signals Low power Light weight Higher bandwidth Thinner Digital signals Non-flammable

Page 10: CREATED BY Santosh Devbhandari BSc IT (Ii)

Relatively expensive cable cost and installation cost. Expensive over short distance. Requires highly skilled installers. Fragility Affected by chemicals Opaqueness Unidirectional Adding additional nodes is difficult

Disadvantages

Page 11: CREATED BY Santosh Devbhandari BSc IT (Ii)

Conclusion

This concludes our study of Fiber Optics. We have looked at what they are and how they work. We have examined the properties, advantages and disadvantages of fibers. Although this presentation does not cover all the aspects of optical fiber work it will have equipped you knowledge and skills essential to the fiber optic industry.

Page 12: CREATED BY Santosh Devbhandari BSc IT (Ii)

ANYQUESTIONS

Page 13: CREATED BY Santosh Devbhandari BSc IT (Ii)