critchley cable markers - construction products costs cable markers may 2007.pdf · critchley cable...

Critchley Cable Markers

1

Z-Type Push-On Wire Markers

Specifications/approvals

Tyco Electronics TTDS- 026.

Temperature rating

Operating temperature range –45°C to +70°C –50°F to +158°F.

0616 1 4 00

Part numbering system

Legend codeColour codePackaging codeProduct/size code

Z-Type markers are individual push-oncharacters used to identify wires andsmall cables permanently. They aredesigned with an expanding profile,enabling each marker to accommodatea wide range of wire/cable sizes.

Z-Type markers are a simple, cost-effective solution for many commercialwire identification applications. Themarkers are supplied either straight cutor chevron cut: the chevron cut optionensures the legends remain aligned.Standard Z-Type markers are yellow orwhite with black legends and can besupplied as loose pieces packed inboxes or on reels. Colour codedmarkers are also available.

Features and benefits

• Resistant to sea water,fuels and oils

• 9 sizes covering wire diameters from 1.5mm to 12.7mm (0.06" to 0.5")

• Applicator wands available for easymarker installation

2

Z-Type Push-On Wire Markers

Ordering Information

Size code Size code Marker size Marker length Pack quantity Cable diameter

(straight cut) (chevron cut) (mm) (mm) (inches)

0580 1151 5 4.5 1000 1.5 - 2.0 (0.06 - 0.08)0581 1152 7 4.5 1000 2.0 - 3.2 (0.08 - 0.13)0615 1153 9 4.5 1000 2.5 - 4.0 (0.10 - 0.16)0616 1154 11 4.5 1000 2.9 - 4.7 (0.11 - 0.19)0617 1155 13 4.5 1000 3.4 - 5.7 (0.13 - 0.22)0618 1156 15 4.5 1000 3.8 - 6.3 (0.15 - 0.25)0620 1157 18 4.5 500 4.3 - 6.9 (0.17 - 0.27)0622 1158 23 6.0 500 5.5 - 8.9 (0.22 - 0.35)0624 1159 35 6.0 250 7.9 - 12.7 (0.31 - 0.50)

Packaging code

1 box 3 reel

Colour code (available for all legends)4 yellow 9 white

Packaging options available

Straight cut Chevron cut

White marker with black legend: Boxes, reels White marker with black legend: Boxes

Yellow marker with black legend: Reels Yellow marker with black legend: Reels

Colour coded Boxes Colour coded Boxes, reels

Colour code

Legend Marker colour Ink colour Legend Marker colour Ink colour

0 Black White 1 Brown White

2 Red Black 3 Orange Black

4 Yellow Black 5 Green Black

6 Blue Black 7 Violet Black

8 Grey Black 9 White Black

Order example: 06161400 (Z-Type markers, size 11, yellow marker with black legend 0, boxed)

Legend code

Legend Code Legend Code Legend Code

0 00 J 19 / 38

1 01 K 20 ~ 39

2 02 L 21 Earth 40

3 03 M 22 ) 41

4 04 N 23 Blank 42

5 05 O 24 : 43

6 06 P 25 , 44

7 07 Q 26 < 45

8 08 R 27 > 46

9 09 S 28 + 47

A 10 T 29 . 48

B 11 U 30

C 12 V 31

D 13 W 32

E 14 X 33

F 15 Y 34

G 16 Z 35

H 17 + 36

I 18 - 37

Applicators

Order code Marker size Pack quantity Order code Marker size Pack quantity

12510000 7 1 12520000 9 1

12530000 11 1 12540000 13 1

12550000 15 1 12560000 18 1

3

K-Type Cable Markers

K-Type markers are used to identifywire bundles, cables, pipes andconduits using specially designed ovalshaped, individual characters that slideon to a PVC carrier, which is thenattached to the substrate using cableties. K-Type markers are ideal for posttermination applications or whereretrofit is anticipated.

These markers are supplied yellow withblack legends and in the standardInternational colour code option andare supplied on reels. K-Type markerscome in one standard size to fit carrierstrips that can hold from 7 to 18markers and are made from aplasticised PVC material.


• Versatile marking system for cables,cable bundles and conduit

• Elliptical marker profile allows easyfitting to carrier strips

Specifications/approvals

Tyco Electronics TTDS- 025.

Temperature rating


1361 1 4 01


Legend codeColour code Packaging code Product/size code

Ordering InformationSize code Marker size Marker length (mm) Cable diameter (mm) Reel quantity

1361 65 60 4.20 – 7.00 500

Packaging code

1 reel


International colour code

Legend Marker colour Ink colour Legend Marker colour Ink colour Legend Marker colour Ink colour0 Black White 1 Brown White 2 Red Black3 Orange Black 4 Yellow Black 5 Green Black6 Blue Black 7 Violet Black 8 Grey Black9 White Black

Legend code

Legend Code Legend Code Legend Code0 00 J 19 / 381 01 K 20 ~ 392 02 L 21 Earth 403 03 M 22 ) 414 04 N 23 Blank 425 05 O 24 : 436 06 P 25 , 447 07 Q 26 < 458 08 R 27 > 469 09 S 28 = 47A 10 T 29 . 48B 11 U 30C 12 V 31D 13 W 32E 14 X 33F 15 Y 34G 16 Z 35H 17 + 36I 18 - 37

Carrier strips

Order code Marker size Capacity Quantity11320000 65 7 markers 50011310000 65 12 markers 50011300000 65 18 markers 25011330000* 65 12 markers 100

* This carrier can be used to flag

Universal carrier strip flag type11330000 65 12 markers 100

K-Type Cable Markers

Carrier Strips for K-Type MarkersCarrier strips provide a simple method for carrying the K65 marker and are idealfor marking large diameter cables. Slotted ends allow for fastening by cable ties.The Universal type has an additional hole at one end to allow ‘flag’ fixing by asingle cable tie.

Service temperature range: –40˚C to +70˚C.Material: Semi-rigid black PVC.Slot dimensions: 1.8mm x 8.3mm.

K-Type marker size Capacity Packed Order codeCarrier strip

65 7 digits 500 1132

65 12 digits 500 1131

65 18 digits 250 1130

Universal carrier strip flag type

65 12 digits 100 1133

Service temperature range: –40˚C to +70˚C.

Material: PPVC.

Chemical ResistanceExcellent: Sodium Hydroxide, Sea Water, Tap Water, Detergent, Diala Oil B, Petrol,Diesel, 50% Sodium Chloride Solution, Concentrated Nitric Acid, AmmoniumHydroxide, Methanol, Diethyl Ether, White Spirit, Sullage Fluid, Silicone HydraulicFluid, Aeroshell (4), Castrol Gas Turbine Oil 98, Kilfrost Fluid, Aircraft Fuel.

Poor: Concentrated Hydrochloric Acid, Acetone, 1, 1, 1 Trichloroethane, Skydrol 500 B4.

Other carriers for K-Type Markers4mm cable tie.4

• Accepts K65 marker for large cables or conduits

• Slotted ends for fixingby cable tie.

Snap-On Wire Markers

Tyco Electronics snap-on markers areconvenient and easy to use. Thesemarkers are supplied on a ‘wand’applicator that simplifies and reducesinstallation time, and saves on the costof marking.

Snap-on wire markers are designed tostand the test of time, preventingcostly re-work before the life of theequipment ends. This is why TycoElectronics snap-on markers are foundtoday in power stations, oil refineries,offshore platforms, and other majorprojects around the world.


• Snap-on markers are the perfect wayto permanently and rapidly markcables, wires, leads, and cores aftertermination and installation

• Easy to alter identification on cablesthat are already marked

• Secure grip for positive fixing to cable• The high elasticity of the marker

enables all types of installation and conduction material to bepermanently marked without damage

• Applicator has a patented slit toprevent over-expansion of themarker during application

• Made from polyoxymethylene whichguarantees strength, dimensionalstability, low moisture absorption,and resistance to chemicals

• Resistant against oils, cleaningagents, fuels, and alkaline solutions.

• Zero halogen material• Ten sizes for cable diameters 0.04"

to 0.75" (1.0mm to 19.0mm)• Colour coded option

Specifications/approvalsTyco Electronics TTDS- 094.

Temperature ratingOperating temperature range –40°C to +106°C –40°F to +223°F.

STD 06 W -4


Legend codeColour code (eg. W=white)SizeSnap-on marker

5

6

Snap-On Wire Markers


Size Cable diameter Colour of Packed box

code (mm) (inches) applicator wand

STD 01 1.00 - 1.40 0.040 - 0.055 Brown 10 mounting wands with 30 identical markers

STD 02 1.40 - 1.80 0.055 - 0.071 Grey 10 mounting wands with 30 identical markers

STD 03 1.90 - 2.65 0.075 - 0.104 Green 10 mounting wands with 30 identical markers

STD 05 2.60 - 3.50 0.091 - 0.118 Natural 10 mounting wands with 30 identical markers

STD 06 2.60 - 3.50 0.102 - 0.138 Red 10 mounting wands with 30 identical markers

STD 09 3.25 - 4.50 0.128 - 0.138 Blue 10 mounting wands with 30 identical markers

STD 12 4.50 - 6.00 0.177 - 0.236 Yellow 10 mounting wands with 30 identical markers

STD 15 5.80 - 8.50 0.228 - 0.335 Orange* 50 identical markers; mounting wand available on request

STD 17 8.50 - 11.50 0.335 - 0.452 Orange* 50 identical markers; mounting wand available on request

STD 21 11.00 - 15.50 0.433 - 0.610 Grey* 50 identical markers; mounting wand available on request

STD 24 15.00 - 19.00 0.590 - 0.750 Grey* 50 identical markers; mounting wand available on request

Colour code (available for all legends)Y yellow W white

Legend code


0 0 J J / Slash

1 1 K K Earth Earth

2 2 L L Blank Blank

3 3 M M : Colon

4 4 N N = Equals

5 5 O O . Dot

6 6 P P

7 7 Q Q

8 8 R R

9 9 S S

A A T T

B B U U

C C V V

D D W W

E E X X

F F Y Y

G G Z Z

H H + Plus

I I - Minus

Applicators

Order code Marker size Colour of applicator Number of applications per pack

STD15 - Applicator 15 Orange 5

STD17 - Applicator 17 Orange 5

STD21 - Applicator 21 Grey 2

STD24- Applicator 24 Grey 2

7

G-Type Push-On Wire Markers



Flammability

LOI 40%, FTI>300°C.

0719 1 4 01


Legend codeColour code (4 = yellow only)Packaging code (1 = box only)Product/size code

G-Type markers are individual push-oncharacters used to identify wires andsmall cables. They are designed with anexpanding profile, enabling eachmarker to accommodate a wide rangeof wire/cable sizes. The markers aresupplied chevron cut to ensure thelegend remains aligned.

G-Type markers are yellow with blacklegends and are supplied as loosepieces packed in boxes.

G-Type markers are particularly suitablefor applications requiring low firehazard properties. They are made froma self extinguishing modifiedthermoplastic polymer and arehalogen, silicone and cadmium free.


• Low fire hazard• Zero halogen, self extinguishing

material• Gusseted design allows marker to fit

over a wide range of cable diameters• Chevron cut ensures markers

stay aligned

8


Markers

Size code Marker size Cable diameter (mm) Box quantity

0719 G3/10 1.40 - 2.50 1000

0720 G3/20 2.00 - 3.50 1000

0721 G4/10 3.00 - 6.00 500

0722 G6/10 5.00 - 9.50 250

0723 G6/20 8.00 - 12.50 250

Packaging code

1 box

Colour code (available for all legends)4 yellow

Legend code


0 00 J 19 / 38

1 01 K 20 ~ 39

2 02 L 21 Earth 40

3 03 M 22 ) 41

4 04 N 23 Blank 42

5 05 O 24 : 43

6 06 P 25 , 44

7 07 Q 26 < 45

8 08 R 27 > 46

9 09 S 28 = 47

A 10 T 29 . 48

B 11 U 30 L1 51

C 12 V 31 L2 52

D 13 W 32 L3 53

E 14 X 33 SERD 54

F 15 Y 34 PE 55

G 16 Z 35 PEN 56

H 17 + 36 ( 62

I 18 - 37

G-Type Push-On Wire Markers

9

V-Type markers are individual push-oncharacters used to identify wires andsmall cables permanently. They aredesigned with an expanding profile,enabling each marker to accommodatea wide range of wire/cable sizes.

V-Type markers are a simple, cost-effective solution for many commercialwire identification applications. Themarkers are supplied chevron cut andthis ensures the legends remainaligned. Standard V-Type markers areyellow or white with black legends andcan be supplied as loose pieces packedin boxes, on reels or flat disc reels.Colour coded markers are also available.


• Resistant to sea water, fuels and oils• 4 sizes covering wire diameters from

1.4mm to 16.0mm (0.06" to 0.63")

V-Type Manual Wire and Cable Markers



0761 1 4 00


Mark/legend codeColour code Packaging code Product/size code

10

V-Type Manual Wire and Cable Markers


Size code Marker size Cable diameter Packed

(mm) (inches)

0761 3 1.40 - 2.80 0.06 - 0.11 1000

0762 5 2.80 - 5.00 0.11 - 0.20 1000

0723 10 4.00 - 10.00 0.16 - 0.39 500

0764 15 8.00 - 16.00 0.31 - 0.63 250

Packaging code

1 box 3 reel


Colour code (for numbers 0-9 only)

Legend Marker colour Ink colour Legend Marker colour Ink colour Legend Marker colour Ink colour

0 Black White 1 Brown White 2 Red White

3 Orange Black 4 Yellow Black 5 Green White

6 Blue White 7 Violet White 8 Grey Black

9 White Black

Mark/Legend code


0 00 J 19 / 38

1 01 K 20 ~ 39

2 02 L 21 Earth 40

3 03 M 22 ) 41

4 04 N 23 Blank 42

5 05 O 24 : 43

6 06 P 25 , 44

7 07 Q 26 < 45

8 08 R 27 > 46

9 09 S 28 = 47

A 10 T 29 . 48

B 11 U 30

C 12 V 31

D 13 W 32

E 14 X 33

F 15 Y 34

G 16 Z 35

H 17 + 36

I 18 - 37

11

O-Type Manual Wire and Cable Markers

The O-Type marker is a thin walledplasticised PVC marker which isparticularly suited to high densitywiring applications where space savingis paramount.

They are colour coded to BS3858: 1992which includes repeated printing of theindividual digit three times around thecircumference of the marker.

Letters and symbols are printed on apink background.


• Conforms to BS3858: 192 Type 3• Colour coding enables identification

when mark is obscured• Thin wall for densely packed wiring• Nine sizes of marker cover cable

sizes up to 16mm2


1106 99 10


Mark/legend codeColour code Product/size code

12

O-Type Manual Wire and Cable Markers


Size code Marker size Marker length (mm) Cable diameter (mm) Cable size mm2 Packed

Part cut

1106 0.75 3.00 0.60 - 1.00 - 1000

1107 10 4.00 0.90 - 1.30 - 1000

1108 12 3.00 1.10 - 1.60 - 1000

1109 15 3.00 1.40 - 2.10 - 1000

1110 20 5.00 1.90 - 2.80 - 1000

1111 25 5.00 2.40 - 3.50 1.00 1000

1112 30 5.00 2.90 - 4.80 1.50 1000

1113 40 5.00 3.90 - 5.80 2.50 & 4.00 1000

1114 55 5.00 5.30 - 8.00 6.00 & 10.00 1000

Colour code (available for all legends)99 pink

Colour code (for numbers 0-9 only)

Legend Marker colour Ink colour Legend Marker colour Ink colour Legend Marker colour Ink colour

0 Black White 1 Brown White 2 Red Black

3 Orange Black 4 Yellow Black 5 Green Black

6 Blue Black 7 Violet Black 8 Grey Black

9 White Black

Mark/Legend code

Legend Code Legend Code Legend Code Legend Code

0 00 J 19 / 38 SO 57

1 01 K 20 ~ 39 -10 58

2 02 L 21 Earth 40 -1 59

3 03 M 22 ) 41 -2 60

4 04 N 23 Blank 42

5 05 O 24 : 43

6 06 P 25 , 44

7 07 Q 26 < 45

8 08 R 27 > 46

9 09 S 28 = 47

A 10 T 29 . 48

B 11 U 30 Ä 49

C 12 V 31 Ö 50

D 13 W 32 L1 51

E 14 X 33 L2 52

F 15 Y 34 L3 53

G 16 Z 35 SERD 54

H 17 + 36 PE 55

I 18 - 37 PEN 56

13

TKM Hand Writable Booklet Self-Laminating Labels

Tyco Electronics TKM self writable,clear vinyl film with a permanentacrylic adhesive is supplied witha white writable area, which isover-laminated upon applicationwith the clear portion of the label.

TKM labels are a quick, simple anddurable form of wire, cable and pipe identification.


• Manufactured with a white coated areafor writing on, and with a clear wrap towind around a wire or cable to coverthe written legend and to protect itagainst impurities that would causethe label to become illegible

• Protects printed information fromchemicals and frequent handling

• Supplied in a handy pocketsize booklet

• Designed to withstand exposure toSolvents, salts, alkalis and water


TKM 50 WE-N


Standard packagingColour (WE=White)*Label sizeProduct family

*TKM size 50 only. Omit this for other sizes

14

TKM Hand Writable Booklet Self-Laminating Labels

Available sizes and formats

Ordering Markers/ A B C Max. cable description pack height Text field height width diameter

(mm) (inches) (mm) (inches) (mm) (inches) (mm) (inches)

TKM50WE-N 90 50.00 2.00 15.00 0.60 25.00 1.00 10.00 0.40

TKM75-N 60 75.00 3.00 25.00 1.00 25.00 1.00 14.00 0.60

TKM150-N 30 150.00 6.00 25.00 1.00 25.00 1.00 38.00 1.50

TKM230-N 30 230.00 9.00 25.00 1.00 25.00 1.00 63.00 2.50

Accessories for manual marking

Ordering description Description Quantity per pack

ZUB-01 Felt-tip pen, fine 1

ZUB-03 Pencil for UV-resistant labelling 1

Ordering information

15

WCD Write-On Self-Laminating Label Dispensers

Tyco Electronics WCD pocket sizedlabel dispenser contains a roll ofpre-cut self-laminating cable markers.Each market has a white markablearea for legend inscription using thespecified marker pen (ZUB-01).

Manufactured with a white coated areafor writing on, and with a clear wrap towind around a wire or cable to coverthe written legend and to protect itagainst impurities that would cause thelabel to become illegible.


• Protects printed information fromchemicals and frequent handling

• Supplied in a handy pocket sizedisposable dispenser

• Aggressive acrylic adhesiveimpervious to oil and water

Specifications/approvalsTyco Electronics TTDS-140.

Temperature rating

Operating temperature –40°C to +80°C -40°F to +176°F

WCD - 318


Label length (ex 31.8mm)Product family

16

WCD Write-On Self-Laminating Label Dispensers



Ordering Markers/ A B C Max. cable description pack height height width diameter

(mm) (inches) (mm) (inches) (mm) (inches) (mm) (inches)

WCD-318 300 31.80 1.25 7.95 0.31 19.00 0.75 7.62 0.30

WCD-476 150 47.60 1.87 12.70 0.50 19.00 0.75 10.16 0.40

WCD-762 90 76.20 3.00 19.00 0.75 19.00 0.75 17.78 0.70

WCD-1520 40 152.00 5.98 25.40 1.00 19.00 0.75 40.64 1.60

Accessories for manual marking

Ordering description Description Quantity per pack

ZUB-01 Felt-tip pen, fine 1

ZUB-03 Pencil for UV-resistant labelling 1

17

CMD Cable and Wire Marker Dispenser

Tyco Electronics CMD portable wiremarker is one of the most user friendlysystems available. Each dispensercontains 10 rolls of individuallynumbered marker tape. Each roll ofmarkers contains 76 individual markerswhich are a convenient length thataccommodates most commonlyidentified wire sizes.

Manufactured from DuPont Tyvek®

material to ensure durability andminimize the potential of tearing.


• Supplied with a pre-determinedlength of 32mm and a width of 6.4mm

• Supplied in a handy pocket sizereusable dispenser

• Aggressive acrylic adhesiveimpervious to oil and water Specifications/approvals

Tyco Electronics TTDS-141.

Temperature ratingOperating temperature –40°C to +80°C -40°F to +176°F.

CMD - 0-9


ContentsProduct family

DuPont® and Tyvek® are trademarks of E.I. DuPont de Nemours and Company.

18

CMD Cable and Wire Marker Dispenser

Ordering information

A

B


Ordering Markers/ A B Commentsdescription pack height height

(mm) (inches) (mm) (inches)

CMD-0-9 10x76 32.00 1.25 6.40 0.25 Loaded dispenser contains markers pre-marked 0 to 9

CMD-C-C 10x76 32.00 1.25 6.40 0.25 Loaded dispenser contains colour coded markers

Extra items

CMD-0-9-REFILL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked 0 to 9

CMD-CC-REFILL 10x76 32.00 1.25 6.40 0.25 Refill box colour coded

CMD-EMPTY N/A N/A N/A Empty dispenser

CMD-A-REFIL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked A

CMD-B-REFIL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked B

CMD-C-REFIL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked C

CMD-D-REFIL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked D

CMD-E-REFIL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked E

CMD-F-REFIL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked F

CMD-G-REFIL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked G

CMD-H-REFIL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked H

CMD-L-REFIL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked L

CMD-N-REFIL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked N

CMD-R-REFIL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked R

CMD-S-REFIL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked S

CMD-T-REFIL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked T

CMD-U-REFIL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked U

CMD-V-REFIL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked V

CMD-W-REFIL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked W

CMD-MINUS-REFIL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked –

CMD-PLUS-REFIL 10x76 32.00 1.25 6.40 0.25 Refill box pre-marked +

19

CWM Wire Marker Cards

Tyco Electronics CWM pre-printed wiremarkers are made with our white vinylcoated cloth tape material, supplied ona thick, easy to handle card stock, witha permanent, rubber based, pressuresensitive adhesive for easy application.Ideal for basic wire markingapplications where pre-printed singleor double-digit legends and someresistance to a variety of solvents,water, oil, dirt and heat is required.


• Convenient and easy to use• Pre-printed for on-site wire marking• Available in colours for colour

coding applications • Available in single and multiple

digit legends


Temperature rating


20

CWM Wire Marker Cards

*Solid cards (SL) = 1 legend on each card. Select a single legend and add to the suffix of the product order code.

*Sequential cards (SQ) = a consecutive range of alpha or numeric legends on each card, as specified in the suffix of the product order code.

*Available options on product order code CWM-SL-legends are: T1, T2, T3, L1, L2, L3, GND, P1, A1, XS, PTO. Add legend suffix of order code.


Product Legend option Package quantity Label width Label height Card width Card heightorder code (mm) (inches) (mm) (inches) (mm) (inches) (mm (inches)

CWM-SL-# * Solid Numbers 0-99 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.00 9.250 50.80 2.000CWM-SL-letter * Solid Letters A - Z 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.00 9.250 50.80 2.000

CWM-SL-colour * Solid Colours 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.00 9.250 50.80 2.000

CWM-SL-legend * Solid 2+ Digits 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.00 9.250 50.80 2.000

CWM-SQ-1-33 Sequential 1 - 33 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.00 9.250 50.80 2.000



CWM-SQ-A-Z Sequential A - Z 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.00 9.250 50.80 2.000

CWM-SQ-AA-ZZ Sequential AA - ZZ 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.00 9.250 50.80 2.000

CWM-SQ-a-z Sequential a - z 25 Cards (825 labels) 6.4 0.250 38.1 1.500 235.00 9.250 50.80 2.000



21

• 316 stainless steel• Slotted channel• Tile face level with channel edge• Embossed characters• Single pressing, one-piece tie

Stainless Steel Betamarker The stainless steel Betamarker Tiles is designed for use with the light duty stainlesssteel Beta-Ties cable ties. It has an embossed highly visible mark on a tile face that islevel with the carrier channel sides. This allows for easy cleaning of paint coveredmarks.

Different carrier lengths accommodate most tagging requirements. Alternative fixing to cabinets or as a tag is made through holes in the carrier back.

Marks available: A-Z, 0-9, +, –, /and blank.

Labelling Systems

Description Packed Order code

BetaMarker tiles (20 per strip) 200 tiles 0700

Carrier strips 6 digits 100 strips 0703

10 digits 00 strips 0704

16 digits 50 strips 0705

Uncoated stainless steel Beta-Ties 5 x 140mm 250 tiles 1819

22

PM 0 75 07–1–4–5

Permark Markers


Characters/spacesper lineFont height (mm)Number of text linesTag height (mm)Tag length (mm)Filler characterPermark

Tyco Electronics Permark 316 stainlesssteel markers are recommended formarking in hostile environments. Usingstate-of-the-art technology and noinks, the marking process produces apermanent, deep surface mark with adarkened character in high contrast to the background. Permark markersare produced to individual customerrequirements on a fast turn-aroundbasis with the flexible and easy to usePermark software that allows electronicor manual data entry. Completedmarkers are supplied in customerdefined kits for ease of installation. Werecommend installation with 316stainless steel cable ties.


• Pre-marked to customerrequirements

• Customer defined kits for ease of installation

• Excellent character legibility• One-piece, 316 stainless

steel construction• Variety of fixing methods• Mark will endure the lifetime of a

Permark S/S marker• Excellent resistance to weather

extremes and high levels of UV light• Resistant to corrosive marine and

industrial atmospheres• Excellent resistance to a variety of

hydrocarbons, organic chemicals,acids, alkalis and inorganic salts.For resistance to a specific chemical, contact your local Tyco Electronicsrepresentative

Service temperature range: 80˚C to +500˚C (112˚F to +932˚F).

Material: Stainless Steel.

Printer information: Pre-printed per customer requirements. Permark Speciality Products.

23

Permark Markers


Ordering Product Size (L x H) Printable area (L x H)description description mm inches mm inches

PM09512-<# text lines> Pre-marked 316 95 x 12 3.74 x 0.47 55 x 10 2.16 x 0.40-<font height> S/S marker-<# characters>

OptionsFonts Various available

Lines per marker One, two or three (Determined by selected font height. Minimum 1 mm / 0.04" spacing between lines.)

Saddle fixings 13 mm L x 2.4 mm H (0.51" L x 0.09" H)

Hole fixings 7 mm (0.28")

Standard colours Metallic

Font heights Characters per lineStandard Condensed

2.5 mm (0.10") 30 N/A

3.0 mm (0.12") 25 N/A

4.0 mm (0.16") 20 30

5.0 mm (0.20") 15 25

6.0 mm (0.24") 15 25

8.0 mm (0.31") 10 20

10.0 mm (0.40") 10 15

Available sizes and formatsOrdering Product Size (L x H) Printable area (L x H)description description mm inches mm inches

PM07507-1-<font height> Pre-marked 316 75 x 7 2.95 x 0.28 50 x 5 1.6 x 0.20-<# characters> S/S marker

OptionsFonts Various available

Lines per marker One only

Saddle fixings 9.5 mm L x 2.4 mm H (0.37" L x 0.09" H)

Hole fixings None

Standard colours Metallic

Font heights Characters per lineStandard Condensed

4.0 mm (0.16") 15 25

5.0 mm (0.20") 10 20

PERM

ARK

Printer Specifications

Printing method: Thermal transfer printhead (180dpi)

Dimensions: 70mm L x 114mm W x 212mm H

Printer weight: 519g

Keyboard: ABC layout. To access international characters: Rapid AccentedCharacter Entry, according to the mobile phone principle.

LCD display: 2 lines. Rechargeable battery pack life indicator. Display backlighting

Operating conditions: Temperature: 4°C to 40°C (39°F to 104°F)Humidity: 10% to 90% RH

Printer kit contents

PrinterRubber protection bumperUser guideSix (6) AA batteriesPower adaptorHard carry caseOne (1) 19mm white flexible nylon tape printer cassetteOne (1) 9mm yellow heat-shrinkable tubing printer cassette

24

Product order code Description

T107M-SMS-PRINTER-KIT-US Printer Kit - US power adaptor includedT107M-SMS-PRINTER-KIT-UK Printer Kit - UK power adaptor includedT107M-SMS-PRINTER-KIT-EU Printer Kit - European adaptor includedT107M-SMS-PRINTER-KIT-AUZ Printer Kit - Australian power adaptor includedT107M-SMS-PRINTER-KITASI Printer Kit - Asia power adaptor includedT107M-SMS-PRINTER-US Printer only (US)T107M-SMS-PRINTER-EU Printer only (European)SMS-US-A/C-ADAPTOR US A/C power adaptorSMS-EU-A/C-ADAPTOR European A/C power adaptorSMS-ASIA-A/C-ADAPTOR UK & Asia A/C power adaptorSMS-AUZ-A/C-ADAPTOR Australian A/C power adaptorSMS-BATTERY-PACK Rechargeable battery packSMS-CARRY STRAP Soft carry strapSMS-PRINTER-HARDCASE Hard case

The new T107M handheld printer fromTyco Electronics is perfect for theprofessional user who needs anaffordable label printer for on-siteapplications that's tough and easy touse. Contractors, panel builders andfacility managers will save time andmoney by using the special Hot Keysthat provide labels at the touch of abutton including wire and cable wraps,module marking, fixed length,serialization, vertical printing, barcodes,symbols and much more.

The T107M handheld printer offersclear, smudge-free high-performancelabels that stick permanently to avariety of surfaces and providesremarkable MIL-spec print permanenceon Heat Shrink Tubing. Print media isoffered in easy-to-load cassettes andincludes an optimized ribbon andchoice of material: Heat Shrink &Nylon Cloth, Vinyl, Polyester andPolypropylene labels.

T107M Handheld Printer

25

T107M Handheld Printer

Description Material Width Length Colour Technical datasheet(mm) (inches) (m)

SMS-NC-12-4 Nylon cloth 12 0.47 3.5 Yellow TTDS-123SMS-NC-12-9 Nylon cloth 12 0.47 3.5 White TTDS-123SMS-NC-19-9 Nylon cloth 19 0.75 3.5 White TTDS-123

SMS-PPNA-6-9 Non adhesive tag 6 0.24 5.5 White TTDS-124SMS-PPNA-9-9 Non adhesive tag 9 0.35 5.5 White TTDS-124

SMS-V-12-4 Coloured vinyl 12 0.47 5.5 Yellow TTDS-125SMS-V-12-9 Coloured vinyl 12 0.47 5.5 White TTDS-125SMS-V-19-2 Coloured vinyl 12 0.75 5.5 Red TTDS-125SMS-V-19-4 Coloured vinyl 19 0.75 5.5 Yellow TTDS-125SMS-V-19-5 Coloured vinyl 19 0.75 5.5 Green TTDS-125SMS-V-19-9 Coloured vinyl 19 0.75 5.5 White TTDS-125

SMS-WP-9-9 Polyester 9 0.35 5.5 White TTDS-126SMS-WP-12-9 Polyester 12 0.47 5.5 White TTDS-126SMS-MP-12-8A Polyester 12 0.47 5.5 Metalized TTDS-127SMS-MP-19-8A Polyester 19 0.75 5.5 Metalized TTDS-127SMS-CP-12-X Polyester 12 0.47 5.5 ClearSMS-CP-19-X Polyester 19 0.75 5.5 Clear


T107M Cassettes

Description Material Cable diameter Length Shrink ratio Colour Technical datasheet(mm) (inches) (m)

SMS-TMS-3.9-4 Heat-shrink tubing 1.18 - 2.33 0.05 - 0.09 1.5 3:1 Yellow TTDS-122SMS-TMS-3.9-9 Heat-shrink tubing 1.18 - 2.33 0.05 - 0.09 1.5 3:1 White TTDS-122SMS-TMS-5.2-4 Heat-shrink tubing 1.73 - 3.73 0.07 - 0.15 1.5 3:1 Yellow TTDS-122SMS-TMS-5.2-9 Heat-shrink tubing 1.73 - 3.73 0.05 - 0.15 1.5 3:1 White TTDS-122SMS-TMS-7.9-4 Heat-shrink tubing 2.97 - 5.13 0.12 - 0.20 1.5 3:1 Yellow TTDS-122SMS-TMS-7.9-9 Heat-shrink tubing 2.97 - 5.13 0.12 - 0.20 1.5 3:1 White TTDS-122SMS-TMS-13.2-4 Heat-shrink tubing 4.64 - 8.70 0.18 - 0.34 1.5 3:1 Yellow TTDS-122SMS-TMS-13.2-9 Heat-shrink tubing 4.64 - 8.70 0.18 - 0.34 1.5 3:1 White TTDS-122

8-1773446-1 04/07 © 2007 – Tyco Electronics – All rights reserved TE Logo, Tyco Electronics, Critchley, Z-Type, G-Type, O-Type, K-Type,Betamarker, Beta-Strip, Beta-Ties and Penmark are trademarks. www.tycoelectronics.com

Europe/Middle East/Africa

Austria – Vienna Phone: +43-1-905-60-0 Fax: +43-1-905-60-1333 Product Information Center: Phone: +43-1-905-60-1249 Fax: +43-1-905-60-1251

Belgium – Kessel-Lo Phone: +32-16-352-300 Fax: +32-16-352-352

Bulgaria – Sofia Phone: +359-2-971-2152 Fax: +359-2-971-2153

Czech Republic and Slovakia Czech Republic – Kurim Phone: +420-541-162-111 Fax: +420-541-162-223 Product Information Center: Phone: +420-541-162-113 Fax: +420-541-162-132

Denmark – Glostrup Phone: +45-43-48-04-00 Fax: +45-43-44-14-14

Egypt – Cairo Phone: +202-419-2334 Fax: +202-417-7647

Estonia – Tartu Phone: +372-5138-274 Fax: +372-7400-779

Finland – Helsinki Phone: +358-95-12-34-20 Fax: +358-95-12-34-250

France – Cergy-Pontoise Cedex Phone: +33-1-3420-8888 Fax: +33-1-3420-8600 Product Information Center: Phone: +33-1-3420-8686 Fax: +33-1-3420-8623

France Export Divisions – Cergy-Pontoise Cedex Phone: +33-1-3420-8804 Fax: +33-1-3420-8699

Germany – Bensheim Phone: +49-6251-133-0 Fax: +49-6251-133-1600 Product Information Center: Phone: +49-6251-133-1999 Fax: +49-6251-133-1988

Greece – Athens Phone: +30-210-9370-396/397 Fax: +30-210-9370-655

Hungary – Budapest Phone: +36-1-289-1000 Fax: +36-1-289-1010 Product Information Center: Phone: +36-1-289-1016 Fax: +36-1-289-1017

Ireland – Dublin Phone: +353-1-866-5612 Fax: +353-1-866-5714

Israel – Petach-Tikva Phone: +972-3-929-0999 Fax: +972-3-919-1088

Italy – Collegno (Torino) Phone: +39-011-4012-111 Fax: +39-011-4031-116Product Information Center: Phone: +39-011-4012-428 Fax: +39-011-40-287-428

Lithuania and Latvia Lithuania – Vilnius Phone: +370-5-213-1402 Fax: +370-5-213-1403 Product Information Center: Phone: +370-5-211-3016 Fax: +370-5-213-1403

Netherlands – ’s-HertogenboschPhone: +31-73-6246-246 Fax: +31-73-6212-365 Product Information Center: Phone: +31-73-6246-999 Fax: +31-73-6246-998

Norway – Nesbru Phone: +47-66-77-88-50 Fax: +47-66-77-88-55

Poland – Warsaw Phone: +48-22-4576-700 Fax: +48-22-4576-720 Product Information Center: Phone: +48-22-4576-704 Fax: +48-22-4576-720

Romania – Bucharest Phone: +40-21-311-3479/3596 Fax: +40-21-312-0574

Russia – Moscow Phone: +7-495-790-7902 Fax: +7-495-721-1893 Product Information Center: Phone: +7-495-790-7902-404 Fax: +7-495-790-7902-401

Russia – St. Petersburg Phone: +7-812-718-8192 Fax: +7-812-718-8193

Slovenia – Ljubljana Phone: +386-1561-3270 Fax: +386-1561-3240

South Africa – Port Elizabeth Phone: +27-41-503-4500 Fax: +27-41-581-0440

Spain – Barcelona Phone: +34-93-291-0330 Fax: +34-93-201-7879

Sweden – Upplands Väsby Phone: +46-8-50-72-50-00 Fax: +46-8-50-72-50-01

Switzerland – Steinach Phone: +41-71-447-0447 Fax: +41-71-447-0444

Turkey – Istanbul Phone: +90-212-281-8181/2/3

+90-212-282-5130/5430 Fax: +90-212-281-8184

Ukraine – Kiev Phone: +380-44-206-2265 Fax: +380-44-206-2264 Product Information Center: Phone: +380-44-206-2265 Fax: +380-44-206-2264

United Kingdom – Stanmore, Middlesex Phone: +44-8706-080208 Fax: +44-208-954-6234 Product Information Center: Freephone (UK only):

+0800-267-666Phone: +44-8706-080208 Fax: +44-208-420-8095

critchley cable markers - construction products costs cable markers may 2007.pdf · critchley cable...

Documents