CURRICULUM VITAE 23rd November 2015

Family name: Hidema First name: Ruri Address (Office, Berkeley): Department of Chemical and Biomolecular Engineering, University of California, Berkeley 93 Tan Hall, Berkeley, CA, 94720 e-mail: hidema@berkeley.edu Tel: (510)642-3699 Address (Office, Japan): Organization of Advanced Science and Technology, Kobe University. 1-1, Rokkodai, Nada, Kobe, Hyogo, Japan. 657-8501 e-mail: hidema@port.kobe-u.ac.jp Web: http://www2.kobe-u.ac.jp/~hidema/myweb/ http://www.cchem.berkeley.edu/sjmgrp/ Degrees and Education: Bachelor of Agriculture Mar. 2004 Tokyo University of Agriculture and Technology Master of Agriculture Mar. 2006 The Graduate School of Agriculture,

Tokyo University of Agriculture and Technology Exchange Ph.D Student Sep.2007-Aug. 2008 Collège Doctoral Franco-Japonais

(Government supported France-Japan exchange system for PhD students) PPSM, Ecole Normale Superieure Cachan, France

Ph.D in Biochemistry and Biotechnology Sep. 2010 The United Graduate School of Agricultural Science,

Tokyo University of Agriculture and Technology Research and professional experience:

Oct. 2010- Mar. 2012 Postdoctoral Fellow, Department of Mechanical Systems Engineering, Graduate School of Science and Engineering, Yamagata University. (Japan)

Apr. 2012-present Assistant Professor, Department of Chemical Engineering, Organization of Advanced Science and Technology,

Kobe University. (Japan)

Oct. 2015-present Visiting Scholor, Department of Chemical Engineering, University of California, Berkeley. (USA)

Membership of academic society: The Society of Rheology American Institute of Chemical Engineers (AIChE) The Society of Rheology, Japan The Society of Chemical Engineers, Japan

The Society of Polymer Science, Japan Japanese Society of Mechanical Engineers

The Heat Transfer Society of Japan Japanese Society of Latent Heat Engineers Award:

2011 Japanese Society of Mechanical Engineers, Fluids Engineering Division,

Excellent Oral Presentation Award on “Polymer effects on soap film turbulence as thin fluids layer composed of surfactants studied with Film Interference Flow Imaging” (12th September. 2011)

2012 Technical congress of Progress and Innovative for Smart Materials and Related Technology, Incentive Award for Poster Presentation on “Novel Shape Memory Gels for Soft Polymeric Actuator –Mechanism and Applications-” (25th April. 2012)

2013 The Society of Chemical Engineers, Japan, Fluid and Particle Processing Division,

Outstanding Technical Movie Award on “Flow behavior induced by a rotationally reciprocating impeller” (17th March. 2013)

2013 Japanese Society of Mechanical Engineers, Soft matter Innovation Session,

Excellent Oral Presentation Award on “Liposome production with air-liquid interfaces in a micro-duct” (9th September. 2013)

2014 The Society of Chemical Engineers, Japan, Fluid and Particle Processing Division,

Incentive Award for Research on “Effects of Different Extensional Rate on Turbulent Drag Reduction of Polymers” (17th March. 2014)

2014 Polish Association of Theoretical and Applied Mechanics and Polish Pilot Centre of ERCOFTAC, XIII Professor J.W. Elsner’s Competition for the best paper in the field of fluid mechanics “Effects of Extensional Rates on Characteristics Scales of Two-Dimensional Turbulence in Polymer Solutions” (18th June. 2014)

2015 The Society of Chemical Engineers, Japan, Incentive Award for Research on

“Effects of extension of polymers on turbulent drag reduction analyzed by Film Interference Flow Imaging” (15th March. 2015)

2015 AIP, APL Materials, APL Materials Poster Award at the 2015 International Conference on Nanospace Materials on

“Elastic Instability of Biopolymer Solutions in Micro Abrupt Contraction-Expansion Channels” (25th June. 2015)

Research Interests: Dr. Hidema’s research interest is in a hierarchic structure of complex fluids. Thus, she has been widely studying the dynamics of complex fluids in nanoscopic, microscopic, mesoscopic and macroscopic scales. Especially, she has focused on the drag reduction with polymers or with surfactants occurring in a macro-scale, on the mesoscopic extensional rheology by use of a self-developed extensional viscometer, on the elastic instability observed in a micro-channel and on the nano-scale weak interaction between polymer and solvent with an atomic force microscopy. She is applying this integrated theory on the hierarchic structures to investigations on the liposome formation in a micro-channel and on the crystalization of polymers and on the 3-D printing technology of elastomers. Recently, she is also studying the heat transfer and flow characteristics of phase change material slurries and the particle dispersion phenomena in a complex flow from the viewpoint of the suspension rheology. Her research topics receive attention not only from academic society but also from companies. She obtained grants from Cross-ministerial Strategic Innovation Promotion Program, Japan Society for the Promotion of Science (JSPS), Japan Science and Technology Agency (JST), and etc. She is also collaborating with some companies. She received many awards from Japanese academic societies and International academic society. She is also managing a Working Party of Rheology on Dilute Solutions in the Society of Rheology, Japan as the Chairperson.

Service: Reviewer: AIChE Journal

Journal of Chemical Engineering of Japan Waste Management Archives of Mechanics Activities in academic society: Secretary Party of Rheology on Dilute Solutions,

The Society of Rheology, Japan Committee member Ladies Association of Japan Society of Mechanical Engineers Committee member The Heat Transfer Society of Japan, Kansai Branch Secretary Japanese Society of Latent Heat Engineers Conference Organizer: Local Organizing Committee of International Conference

10th IIR Conference on Phase Change Materials and Slurries for Refrigeration and Air-Conditioning. July, Kobe (2012)

15th International Conference on Heat Transfer. August, Kyoto (2014) International Symposium on Rheology, September, Kobe (2015)

Organizing Committee of National Conference 2nd Symposium on Latent Heat Engineering, Japanese Society of Latent Heat Engineers.

December, Kobe (2012) Seminar on Heat Transfer, The Heat Transfer Society of Japan, Kansai Branch. September, Kobe (2013)

3rd Symposium on Latent Heat Engineering, Japanese Society of Latent Heat Engineers.

November, Kobe (2013)

4th Symposium on Latent Heat Engineering, Japanese Society of Latent Heat Engineers.

November, Tokyo (2014)

63th Annual meeting of The Society of Rheology, Japan. September, Kobe (2015)

Session Organizer of National Conference Soft Matter Innovation, Annual Meeting of Japan Society of Mechanical Engineers. September, Okayama (2013) Thermal Engineering Symposium,

Autumn Meeting of The Society of Chemical Engineers, Japan. September, Kyusyu (2014) Soft Matter Innovation, Annual Meeting of Japan Society of Mechanical Engineers. September, Tokyo (2014) Teaching:

2012 Seminar (Advance Course), Kobe University 2013 Seminar (Advance Course), Kobe University Exercise for Transport Science and Separation Engineering, Kobe University 2014 Seminar (Advance Course), Kobe University Exercise for Transport Science and Separation Engineering, Kobe University Chemical Engineering Stoichiometry, Kobe City College of Technology 2015 Seminar (Advance Course), Kobe University

(Main) Grant: 1. Yonezawa City Grant. 2011.

“Fundamental Research to Develop a Diagnosis Apparatus for Synovial Fluids” 2. Grant-in-Aid for Young Scientists B,

Japan Society of the Promotion of Science. Grant Number: 24760129. April 2012 – March 2015. “Development of Film Interference Flow Imaging to Investigate Drag Reduction Effects in Terms of Extensional Viscosity of Polymers”

3. Adaptable and Seamless Technology transfer Program through target driven R&D (A-STEP), Japan Science and Technology Agency. Grant Number: AS242Z02810P. November 2012 – October 2013. “Fundamental Research to Develop a Diagnosis Apparatus for Bio-Fluids by Using Micro-Electroosmotic Flow and Film Interference Flow Imaging”

4. Research Grant for Energy and Recycle Area, Kansai Research Foundation for Technology Promotion (KRF). April 2014 – March 2015. “Effect of Frictional Drag of a Single-Chain Polymer on Drag Reduction Effects”

5. Research Grant, Hyogo Science and Technology Association. April 2014 – March 2015. “Investigation of Elastic Turbulence in a Micro-Channel”

6. Cross-ministerial Strategic Innovation Promotion Program, Cabinet Office, Goverment of Japan. November 2014 – March 2017. “Research on 3D printing”

7. Grant-in-Aid for Young Scientists A, Japan Society of the Promotion of Science. Grant Number: 15H05552. April 2015 – March 2019. “Hierarchical Flow Characteristics of Dilute Polymer Solution in Terms of Extensional Flow”

PAPER LIST JOURNALS 1. Zenji Yatabe, Ruri Hidema, Chihiro Hashimoto, Robert Bernard Pansu, Hideharu Ushiki, “Size

evolution of onion structure under oscillatory shear flow”, Chemical Physics Letters, 475, 101-104 (2009)

2. Ruri Hidema, Zenji Yatabe, Masahiko Shoji, Chihiro Hashimoto, Robert Pansu, Gabriel Sagarzazu, Hideharu Ushiki, “Image analysis of thickness in flowing soap films. I: effects of polymer”, Experiments in Fluids, 49, 725-732 (2010)

3. Ruri Hidema, Taisuke Yoshizawa, Khairi Bin Nasaruddin, Hidemitsu Furukawa, “Self-Repairing Materials Created with Fiber-Reinforced Shape-Memory Gels”, Transactions of the Japan Society of Mechanical Engineers, Series A, 77, 764-768, (2011)

4. Ruri Hidema, Keiichi Sugita, Hidemitsu Furukawa, “3-Dimensional Freeform Fabrication of High-Strength Gels by Laser Scanning Irradiation”, Transactions of the Japan Society of Mechanical Engineers, Series A, 77, 1002-1006, (2011)

5. Ruri Hidema, Hideharu Ushiki, Hidemitsu Furukawa, “Polymer Effects on Turbulence in Flowing Soap Films Studied with Film Interference Flow Imaging Method”, Journal of Solid Mechanics and Materials Engineering, 5, 838-848 (2011)

6. Tomohiro Yokoo, Ruri HIidema, Hidemitsu Furukawa, “Novel Optical Devices Developed with High-Strength Gels “, Journal of Solid Mechanics and Materials Engineering, 5, 1015-1021 (2011)

7. Junko Kamiguri, Noriko Tsuchiya, Ruri Hidema, Masatoshi Tachibana, Zenji Yatabe, Masahiko Shoji, Chihiro Hashimoto, Robert Bernard Pansu, Hideharu Ushiki, “Contraction Behaviors of Vorticella sp. Stalk Investigated using High-Speed Video Camera. I: Nucleation and Growth Model” , Biophysics, 8, 1-9 (2012)

8. Junko Kamiguri, Noriko Tsuchiya, Ruri Hidema, Zenji Yatabe, Masahiko Shoji, Chihiro Hashimoto, Robert Bernard Pansu, Hideharu Ushiki, “Contraction Behaviors of Vorticella sp. Stalk Investigated using High-Speed Video Camera. II: Viscosity Effect of Several Types of Polymer Additives”, Biophysics, 8, 11-19 (2012)

9. Go Takada, Ruri Hidema, Hidemitsu Furukawa, “Development of Ultrahigh Ductile Gels“, Journal of Solid Mechanics and Materials Engineering, 6, 169-177 (2012)

10. Go Takada, Ruri Hidema, Hidemitsu Furukawa, “Fiber Reinforced Gels with High Strength”, Transactions of the Japan Society of Mechanical Engineers, Series A, 78, 1120-1124, (2012)

11. Tomohiro Yokoo, Ruri Hidema, Hidemitsu Furukawa, “Smart Lenses Developed with High-Strength and Shape Memory Gels”, e-Journal of Surface Science and Nanotechnology, 10, 243-247 (2012)

12. Ruri Hidema, Hidemitsu Furukawa, “Development of Film Interference Flow Imaging Method (FIFI) Studying Polymer Stretching Effects on Thin Liquid Layer”, e-Journal of Surface Science and Nanotechnology, 10, 335-340 (2012)

13. Go Takada, Ruri Hidema, Hidemitsu Furukawa, “Ultrahigh Ductile Gels Having Inter-Crosslinking Network (ICN) Structure”, e-Journal of Surface Science and Nanotechnology, 10, 346-350 (2012)

14. Yoshitaka Amano, Ruri Hidema, Jin Gong, Hidemitsu Furukawa, “Creation of Shape-memory

Gels with Inter-crosslinking Network Structure”, Chemistry Letters, 41, No.10, pp.1029-1031 (2012)

15. Sho Harada, Ruri Hidema, Hidemitsu Furukawa, “Intelligent Button Developed Using Smart Soft and Wet Materials”, Chemistry Letters, 41, No.10, pp.1047-1049 (2012)

16. Ruri Hidema，Hiroshi Suzuki, Yoshiyuki Komoda, Hidemitsu Furukawa, “Extensional Viscosity of Semi-Dilute Polymer Solution Effect on Two-Dimensional Turbulence”, International Journal of Transport Phenomena, 13, No.3, pp.183-191 (2013)

17. Koji Masuda, Hiroshi Suzuki, Yoshiyuki Komoda, Ruri Hidema, Particle Dispersion/Aggregation Model in a Non-Uniform Shear Flow, Nihon Reoroji Gakkaishi, 41, No.2, 75-81 (2013)

18. Koki Yamamoto, Ruri Hidema, Gong Jin, Hidemitsu Furukawa, “Joule-Heat Control of Shape-Memory Gels with Conductivity”, Transactions of the Japan Society of Mechanical Engineers, Series A, 79, 512-516 (2013)

19. Ruri Hidema, Hiroshi Suzuki, Shingo Harada, Takahito Shiraki, Hidemitsu Furukawa, “Development of Extensional Viscosity Measurement Method on Low Viscos Polymer Solution with an Abrupt Contraction Flow”, Transactions of the Japan Society of Mechanical Engineers, Series B, 79, 1264-1268 (2013)

20. Koji Masuda, Hiroshi Suzuki, Yoshiyuki Komoda, Ruri Hidema, “Aggregation/Dispersion Behaviors of Fine Particles in a Flow between Parallel Plates”, Journal of Chemical Engineering of Japan, 46, 524–529 (2013)

21. Hisato Muroi, Ruri Hidema, Jin Gong, Hidemitsu Furukawa, “Development of Optical 3D Gel Printer for Fabricating Free-Form Soft & Wet Industrial Materials and Evaluation of Printed Double-Network Gels”, Journal of Solid Mechanics and Materials Engineering, 7, 163–168 (2013)

22. Yosuke Watanabe, Keisuke Maekawa, Ruri Hidema, M. Hasnat Kabir, Jin Gong, Hidemitsu Furukawa, “Strucural Analysis and Mechanical Properties of Dry-Synthesis Gels”, Journal of Solid Mechanics and Materials Engineering, 7, 224–227 (2013)

23. Hidemitsu Furukawa, Ruri Hidema, Go Takada, Yoshitaka Amano, M. Hasnat Kabir, Jin Gong, “Smart Hydrogels Developed with Inter-Crosslinking Network (ICN) Structure”, Journal of Solid Mechanics and Materials Engineering, 7, 245–250 (2013)

24. Jin Gong, Yosuke Watanabe, Yusuke Watanabe, Ruri Hidema, M. Hasnat Kabir, Hidemitsu Furukawa, “Development of a Novel Standard Type of Gel Engineering Materials via Simple Bulk Polymerization”, Journal of Solid Mechanics and Materials Engineering, 7, 455–462 (2013)

25. Ruri Hidema, Hiroshi Suzuki, Shion Hisamatsu, Yoshiyuki Komoda, Hidemitsu Furukawa, “Effects of the Extensional Rate on Two-dimensional Turbulence of Semi-dilute Polymer Solution Flows”, Rheologica Acta, 52, 10, 949-961 (2013)

26. Saki Senda, Yoshiyuki Komida, Hiroshi. Takeda, Yushi Hirata, Rruri Hidema, Hiroshi Suzuki, “Fluid Deformation Induced by a Rotationally Reciprocating Impeller”, Journal of Chemical Engineering of Japan, 47, 151-158 (2014)

27. Ruri Hidema, Takuya Tano, Hiroshi Suzuki, Makoto Fujii, Yoshiyuki Komoda, Takafumi Toyoda, “Phase separation characteristics of ammonium alum hydrates with poly vinyl alcohol”,

Journal of Chemical Engineering of Japan, 47, 169-174 (2014) 28. Hiroshi Suzuki, Yuto Furukawa, Ruri Hidema, Yoshiyuki Komoda, “Flow and

Oxygen-Dissolution Characteristics of Micro-Bubbles in a Viscoelastic Fluid” Journal of Chemical Engineering of Japan, 47, 201-206 (2014)

29. Hidemitsu Furukawa, Noriko Tan, Yosuke Watanabe, Jin Gong, M. Hasnat Kabir, Ruri Hidema, Yoshiharu Miyashita, Kazuyuki Horie, Rikio Yokota, “High-Strength Network Structure of Jungle-Gym Type Polyimide Gels Studied with Scanning Microscopic Light Scattering”, Mechanics and Model-Based Control of Advanced Engineering Systems, Springer, pp.103-111, (2014)

30. Ruri Hidema, Naoya Yamada, Hiroshi Suzuki, Hidemitsu Furukawa, “Turbulent Flow Characteristics Controlled by Polymers”, Mechanics and Model-Based Control of Advanced Engineering Systems, Springer, pp.163-170, (2014)

31. Ruri Hidema, Hiroshi Suzuki, Shion Hisamatsu, Yoshiyuki Komoda, “Characteristic Scales of Two-Dimensional Turbulence in Polymer Solutions” AIChE journal, 60, 1854-1862 (2014)

32. Takafumi Toyoda, Reishi Narisada, Hiroshi Suzuki, Ruri Hidema, Yoshiyuki Komoda, “Fabrication Process of Silica Hard Shell Micro-Capsule (HSMC) Containing Phase Change Materials” Chemistry Letters, 43, 820-821 (2014)

33. Ruri Hidema, “Effects of extensional rates on characteristic scales of two-dimensional turbulence in polymer solutions”, Journal of Physics: Conference Series, 530, 012065-012072 (2014)

34. Hiroshi Suzuki, Hideki Sato, Ruri Hidema, Yoshiyuki Komoda, “Bulge structure in a cavity swept by a viscoelastic fluid”, Journal of Physics: Conference Series, 530, 012055-012062 (2014)

35. Ruri Hidema, Hiroshi Suzuki, Takuya Tano, Yoshiyuki Komoda, “Flow and Heat Transfer Characteristics of Ammonium Alum Hydrate Slurries with Surfactants as Drag-Reducers and with Polyvinyl Alcohol as Stabilizers”, International Heat Transfer Conference 15, begell house. inc. publishers, ISBN No. 978-1-56700-421-2 (2014)

36. Hiroshi Suzuki, Ruri Hidema, Yoshiyuki Komoda, “Size Effect of the Flow Path on the Flow and Heat Transfer Characteristics in a Cavity Swept by a Visco-Elastic Fluid”, International Heat Transfer Conference 15, begell house. inc. publishers, ISBN No. 978-1-56700-421-2 (2014)

37. Takafumi Toyoda, Ruri Hidema, Yoshiyuki Komoda, “Crystal Growth and Viscosity Behaviors of Ammonium Alum Hydrate Solution with PVA in Shear Flow”, Reoroji Gakkaishi, 42, 219-226, (2014)

38. Hiroshi Suzuki, Ruri Hidema, Yoshiyuki Komoda, “Inertio-elastic flow instability in a micro-cavity swept by a visco-elastic fluid”, Transactions of the JSME (in Japanese), 81, 14-00650-14-00659 (2015)

39. Hiroshi Suzuki, Ruri Hidema, Yoshiyuki Komoda, “Flow characteristics in a micro-cavity swept by a visco-elastic fluid”, Experimental Thermal and Fluid Science, 67, 96-101 (2015)

40. Koji Masuda, Hiroshi Suzuki, Yoshiyuki Komoda, Ruri Hidema, “Numerical Simulation of Particle Dispersion in Flow between Coaxial Cylinders under Unsteady Flow Conditions”, Nihon Reoroji Gakkaishi, 43, 85-92 (2015)

41. Saki Senda, Noriyuki Yamagami, Yoshiyuki Komoda, Yushi Hirata, Hiroshi Suzuki, Ruri Hidema, “Power Characteristics of a Rotationally Reciprocating Impeller”, Journal of Chemical Engineering of Japan, 48, 885-890 (2015)

42. Yoshiyuki Komoda, Shigeyuki Kobayashi, Hiroshi Suzuki, Ruri Hidema, “Effect of shear strain in coating on the particle packing of gelled-clay particle dispersions during drying”, Journalof Coating Technology Research, 12, 939-948 (2015)

43. Ruri Hidema, Hiroshi Suzuki, Ikumi Murao, Shion Hisamatsu, Yoshiyuki Komoda, “Effects of Extensional Rates on Anisotropic Structures and Characteristic Scales of Two-Dimensional Turbulence in Polymer Solutions”, Flow, Turbulence and Combustion, in press, DOI: 10.1007/s10494-015-9647-8 (2016)

44. Ruri Hidema, Takafumi Toyoda, Hiroshi Suzuki, Yoshiyuki Komoda, “Adhesive behavior of a calcium carbonate particle to solid walls having different hydrophilic characteristics”, International Journal of Heat and Mass Transfer, 92, 603-609, (2016)

PAPERS SUBMITTED TO INTERNATIONAL CONFERENCE 1. Ruri Hidema, Zenji Yatabe, Chihiro Hashimoto, Robert Pansu, Hideharu Ushiki, “New

Approach to Effects of Polymer in Flowing Soap Films -Some Methods of Image Processing-”, The 8th Asian Thermophysical Properties Conference, Paper No. 079, 6 pages, Fukuoka, Japan, August (2007)

2. Ruri Hidema, Carine Julien, Hideharu Ushiki, Qing Zhou, Pierre Audebert, Antoine Courjaud, Eric Mottay, Robert B Pansu, “Video FLIM Using a Versatile Short Pulse Laser Source”, Focus on Microscopy Conference, 1 pages, Krakow, Poland, April(2009)

3. Hidemitsu Furukawa, Ruri Hidema, Kazuyuki Horie, Shunsuke Hirotsu, “Fast and Slow Relaxation Modes in Shrunken Phase of Thermoresponsible N-Isopropylacrilamide Gels Studied With Scanning Microscopic Light Scattering (SMILS)”, JSME/ASME 2011 International Conference on Materials & Processing, Proceedings of the 4th JSME/ASME 2011 International Conference on Materials and Processing, ICMP2011, Paper No. ICMP2011-51048, 5 pages, Oregon, USA, June (2011)

4. Tomohiro Yokoo, Ruri Hidema, Hidemitsu Furukawa, “Novel Optical Devices Developed with High-Strength Gels”, JSME/ASME 2011 International Conference on Materials & Processing, Proceedings of the 4th JSME/ASME 2011 International Conference on Materials and Processing, ICMP2011, Paper No. ICMP2011-51049, 5 pages, Oregon, USA, June (2011)

5. Go TAKADA, Ruri Hidema, Hidemitsu Furukawa, “Development of Ultrahigh Ductile Gels”, JSME/ASME 2011 International Conference on Materials & Processing, Proceedings of the 4th JSME/ASME 2011 International Conference on Materials and Processing, ICMP2011, Paper No. ICMP2011-51050, 4 pages, Oregon, USA, June (2011)

6. Ruri Hidema, Hidemitsu Furukawa, Hideharu Ushiki, “Polymer Effects on Turbulence in Flowing Soap Films Studied with Film Interference Flow Imaging Method”, JSME/ASME 2011 International Conference on Materials & Processing, Proceedings of the 4th JSME/ASME 2011 International Conference on Materials and Processing, ICMP2011, Paper No. ICMP2011-51066, 7 pages, Oregon, USA, June (2011)

7. Ruri Hidema, Naoya Yamada, Hidemitsu Furukawa, “Diagnosis at a glance of biological

non-Newtonian fluids with Film Interference Flow Imaging (FIFI)”, SPIE 2012 Smart Structures/NDE , Proc. of SPIE, 8346, pp. 83461D-1- 83461D-7, San Diego, USA, March (2012)

8. Hidemitsu Furukawa, Mayumi Yoshizawa, Kyoko Yamada, Toshiyuki Watanabe, Ruri Hidema, Kazuyuki Horie, “Photo-responsible gel actuator developed with scanning microscopic light scattering”, SPIE 2012 Smart Structures/NDE , Proc. of SPIE, 8341, pp.83411T-1-83411T-6, San Diego, USA, March (2012)

9. Yoshitaka Amano, Ruri Hidema, Hidemitsu Furukawa, “An inter-crosslinking network gels that has both shape memory and high ductility”, SPIE 2012 Smart Structures/NDE , Proc. of SPIE, 8341, pp.83412B-1-83412B-7, San Diego, USA, March (2012)

10. Sho Harada, Ruri Hidema, Hidemitsu Furukawa, “Soft and wet actuator developed with responsible high-strength gels”, SPIE 2012 Smart Structures/NDE , Proc. of SPIE, 8341, pp.83412C-1-83412C-6, San Diego, USA, March (2012)

11. Jin Gong, Ruri Hidema, Sho Harada, Hidemitsu Furukawa, “Novel Shape Memory Gels for Soft Polymeric Actuator -Mechanism and Applications-“, PI-SMART(Progress and Innovation of SMART) in Hirosaki 2012, Hirosaki Culture Center, Hirosaki, Japan, April 24-25 (2012)

12. Yoshitaka. Amano, Go. Takada, Ruri. Hidema, Hidemitsu. Furukawa, “Creation of Shape Memory Gels with Inter-Crosslinking Network Structure”, IACIS 2012 International Association of Colloid and Interface Scientists, Conference, S1F15, Sendai International Center, Sendai, Japan, May 13-18 (2012)

13. S. Harada, Ruri Hidema, Hidemitsu Furukawa, “Intelligent Button Developed with Smart Soft and Wet Materials”, IACIS 2012 International Association of Colloid and Interface Scientists Conference, S1F16, Sendai International Center, Sendai, Japan, May 13-18 (2012)

14. Hiroshi Suzuki, Makoto Fujii, Taketo Fudaba, Yoshiyuki Komoda, Toru Ishigami, Ruri Hidema, “Solidification heat transfer characteristics of ammonia alum hydrate slurries treated with drag-reducing surfactants”, Refrigeration Science and Technology, 2, pp.94-101, Kobe, Japan, August (2012)

15. Takafumi. Toyoda, Hiroshi Suzuki, Yoshiyuki Komoda, Ruri Hidema, “Adsorption characteristics of ammonia alum hydrate particles onto the coated metal”, Refrigeration Science and Technology, 2, pp.326-333, Kobe, Japan (2012)

16. Hidemitsu Furukawa,  Jin Gong, Yoshitaka Amano, Go Takada, Ruri Hidema, “Smart Hydrogels Developed With InterCrosslinking Network (ICN) Structure”, 3rd Asian Symposium on Materials and Processing, Indian Institute of Technology Madras, Chennai, India, August 30-31 (2012)

17. Jin Gong, Yusuke Watanabe, Ruri Hidema, Hidemitsu Furukawa, “Creating Standards For Soft And Wet Industrial Materials”, 3rd Asian Symposium on Materials and Processing, Indian Institute of Technology Madras, Chennai, India, August 30-31 (2012)

18. Masato Wada, Jin Gong, Ruri Hidema, Hidemitsu Furukawa, “Surface and Bulk Mechanical Properties of Soft and Wet Materials”, 3rd Asian Symposium on Materials and Processing, Indian Institute of Technology Madras, Chennai, India, August 30-31 (2012)

19. Hisato Muroi, Jin Gong, Ruri Hidema, Hidemitsu Furukawa, “Optical 3D Printing Of Soft And Wet Industrial Materials”, 3rd Asian Symposium on Materials and Processing, Indian Institute of Technology Madras, Chennai, India, August 30-31 (2012)

20. Ruri Hidema，Hiroshi. Suzuki, Yoshiyuki. Komoda, Hidemitsu. Furukawa, “Single Image Turbulence Analysis for Drag Reduction Affected by Flexibility of Polymers”, 2012 AIChE ANNUAL MEETING, No.142ag, 8pages, David L. Lawrence Convention Center, Pittsburgh, USA, 28 October - 2 November (2012)

21. Takafumi Toyoda, Hiroshi. Suzuki, Yoshiyuki. Komoda, Ruri. Hidema，“Adsorption Behaviour of a Calcium Carbonate Particle to Solid Walls Having Different Hydrophilic Characteristics”, 2012 AIChE ANNUAL MEETING, No.345f, 8pages, David L. Lawrence Convention Center, Pittsburgh, USA, 28 October - 2 November (2012)

22. Yuto Furukawa, Hiroshi Suzuki, Yoshiyuki Komoda, Ruri Hidema, “Characteristics of oxygen-dissolution accelerated by use of micro-bubbles in a viscoelastic fluid”, International Workshop on Process Intensification 2012, pp.15-16, Korea University, Seoul, Korea, November (2012)

23. Saki Senda, Yoshiyuki Komoda, Hiroshi Takeda, Yushi Hirata, Ruri Hidema, Hiroshi Suzuki, “Poor micing regions in an intensive mixing region induced by a rotationally reciprocating impeller”, International Workshop on Process Intensification 2012, pp.19-20, Korea University, Seoul, Korea, November (2012)

24. Takuya Tano, Hiroshi Suzuki, Yoshiyuki Komoda, Ruri Hidema, Makoto Fujii, “Phase separation characteristics of ammonium alum hydrate with polyvinyl alcohol”, International Workshop on Process Intensification 2012, pp.23-24, Korea University, Seoul, Korea, November (2012)

25. Ruri Hidema, Hiroshi Suzuki, Yoshiyuki Komoda, “Energy transfer in drag reduction of two-dimensional turbulence studied by frequency analysis”, International Workshop on Process Intensification 2012, pp.33-34, Korea University, Seoul, Korea, November (2012)

26. Hirohiko Aihara, Hiroshi Suzuki, Tomohisa Katsuda, Yoshiyuki Komoda, Ruri Hidema, “Development of Liposome Preparation, Using Gas-Liquid Phase Adsorption”, International Workshop on Process Intensification 2012, pp.51-52, Korea University, Seoul, Korea, November (2012)

27. Ruri Hidema, Hiroshi Suzuki, Yoshiyuki Komoda, Hidemitsu Furukawa, “Extensional Viscosity of Semi-Dilute Polymer Solution Effect on Two-Dimensional Turbulence”, No.155, 6pages, The 23rd International Symposium on Transport Phenomena, The University of Auckland, New Zealand, 19-22 November (2012)

28. Hiroshi Suzuki, Yuta Higuchi, Yoshiyuki Komoda, Ruri Hidema, “Effect of the Molar Ratio of Counter-Ions on Flow Characteristics of Surfactant Solutions Sweeping Cavities” , No.156, 7pages, The 23rd International Symposium on Transport Phenomena, The University of Auckland, New Zealand, 19-22 November (2012)

29. Yasuhiro Chizaki, Yoshiyuki Komoda, Hiroshi Suzuki, Ruri Hidema, “Transition of the Viscoelastic Behavior of Concentrated Slurry in the Dispersion Process”, Proceedings of The 5th Asian Coating Workshop (ACW2013) P.19, 9-10 May (2013), Hana Square, Korea University, Seoul, Korea

30. Nobuhiko Furuse, Yoshiyuki Komoda, Hiroshi Suzuki, Ruri Hidema, “Destruction Process of Particle Aggregates in a Startup Flow Generated within Rotational Parallel Disks”, Proceedings of The 5th Asian Coating Workshop (ACW2013) P.24-25, 9-10 May (2013), Hana Square, Korea University, Seoul, Korea

31. Ruri Hidema, Shion Hisamatsu, Hiroshi Suzuki, Yoshiyuki Komoda, “Drag-reducing surfactant effects on two-dimensional turbulent flow”, No. 4c.3, 3pages, 8th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Lisboa, Portugal, 16-20 June (2013)

32. Hiroshi Suzuki, Takuya Tano, Kouji Tanaka, Ruri Hidema, Yoshiyuki Komoda “Flow and heat transfer characteristics on ammonia alum hydrate slurries with surfactants and stabilizers”, No. 4a.4, 6pages, 8th World Conference on Experimental Heat Transfer, Fluid Mechanics and

Thermodynamics, Lisboa, Portugal, 16-20 June (2013) 33. Ruri Hidema, “Anisotropic structures induced by polymers in two-dimensional turbulent flows”,

Collaborative Conference on 3D & Materials Research (CC3DMR) 2013, 2pages, 24-28 June (2013)

34. Koji Tanaka, Takuya Tano, Hiroshi Suzuki, Ruri Hidema, Yoshiyuki Komoda, “Pipe Size Effects on Flow and Heat Transfer of Ammonia Alum Hydrate Slurries Treated with Surfactants”, 9th World Congress of Chemical Engineering, No. MoP-T1-108, 4pages, 18-23, August. Coex, Seoul, Korea (2013)

35. Naoki Sawa, Hiroshi Suzuki, Ruri Hidema, Yoshiyuki Komoda, “Microscopic Observation of Marangoni Convection Characteristics in Absorbents with Surfactants Using For an Absorption Chiller”, 9th World Congress of Chemical Engineering, No. MoP-T1-109, 4pages, 18-23, August. Coex, Seoul, Korea (2013)

36. Shion Hisamatsu, Ruri Hidema, Hiroshi Suzuki, Yoshiyuki Komoda, “Effects of Counter-ion Concentration of Drag-reducing Surfactant Solutions Analyzed By a Two-dimensional Turbulent Flow”, 9th World Congress of Chemical Engineering, No. MoP-T1-111, 4pages, 18-23, August. Coex, Seoul, Korea (2013)

37. Ruri Hidema, Hiroshi Suzuki, Yoshiyuki Komoda, “Drag Reduction Effects Due to Polymer Extensional Viscosity Analyzed By Two-dimensional Turbulent Flow”, 9th World Congress of Chemical Engineering, No. WeO-T129A-3, 4pages, 18-23, August. Coex, Seoul, Korea (2013)

38. Takahito Shiraki, Ruri Hidema, Hiroshi Suzuki, Yoshiyuki Komoda, “Development of an Extensional Viscosity Measurement Method For Low Viscous Polymer Solutions with an Abrupt Contraction Flow”, 9th World Congress of Chemical Engineering, No. WeO-T129B-1, 4pages, 18-23, August. Coex, Seoul, Korea (2013)

39. Hiroshi Suzuki, Taketo Fudaba, Keiko Fujioka, Ruri Hidema, Yoshiyuki Komoda, “Heat And Mass Transfer Characteristics in a Calcium Chloride/Expanded Graphite Cell in a Chemical Heat Pump”, International Symposium on Innovative Materials for Processes in Energy Systems 2013, 4-6, September. Fukuoka, Japan (2013)

40. Ruri Hidema, Hiroshi Suzuki, Junpei Mori, Yoshiyuki Komoda, “Intermittent Gas/Liquid Interfaces in a Micro-Channel for Liposome Production”, 2013 AIChE ANNUAL MEETING, No. 334575, 8pages, 3-8, November. Hiton San Fransisco, Union Square, San Francisco, CA, USA (2013)

41. Hiroshi Suzuki, Koji Masuda, Ruri Hidema, Yoshiyuki Komoda, “Numerical Simulation On Unsteady Dispersion Characteristics of Particles in a Flow Between Coaxial Cylinders”, 2013 AIChE ANNUAL MEETING, No. 334568, 8pages, 3-8, November. Hiton San Fransisco, Union Square, San Francisco, CA, USA (2013)

42. Saki Senda, Yoshiyuki Komoda, Hiroshi Takeda, Yushi Hirata, Ruri Hidema, Hiroshi Suzuki, “Characteristics of Fluid Deformation Induced By a Rotationally Reciprocating Impeller”, 2013 AIChE ANNUAL MEETING, No. 334236, 8pages, 3-8, November. Hiton San Fransisco, Union Square, San Francisco, CA, USA (2013)

43. Yoshiyuki Komoda, Taishi Yamane, Hiroshi Suzuki, Ruri Hidema, “Development of Particle Packed Layer in the Drying Process of Latex Paints”, 2013 AIChE ANNUAL MEETING, No. 334994, 8pages, 3-8, November. Hiton San Fransisco, Union Square, San Francisco, CA, USA (2013)

44. Ruri Hidema, Hiroshi Suzuki, Keiichiro Tanomura, Yoshiyuki Komoda, “Micro-Fluidic Behavior Near Gas/Liquid Interface on Liposome Production in a Micro-Channel”, 5th International Conference on HEAT TRANSFER and FLUID FLOW in MICROSCALE, 6pages, 22-25, April. Aix Marseille University, Marseilles, France (2014)

45. Hiroshi Suzuki, Ruri Hidema, Yoshiyuki Komoda, “Flow Characteristics in a Micro-Cavity Swept by a Visco-Elastic Fluid”, 5th International Conference on HEAT TRANSFER and FLUID FLOW in MICROSCALE, 6pages, 22-25, April. Aix Marseille University, Marseilles, France (2014)

46. Ruri Hidema, “Effects of Extensional Rates on Characteristic Scales of Two-dimensional Turbulence in Polymer Solutions”, XXI Fluid Mechanics Conference, No. E-7, 8pages, 15-18, June. AGH University of Science, Krakow, Poland (2014)

47. Hiroshi Suzuki, Hideki Satoh, Ruri Hidema, Yoshiyuki Komoda, “Bulge Structure in a Cavity Swept by a Viscoelastic Fluid”, XXI Fluid Mechanics Conference, No. NN-2, 8pages, 15-18, June. AGH University of Science, Krakow, Poland (2014)

48. Ruri Hidema, Hiroshi Suzuki, Takuya Tano, Yoshiyuki Komoda, “Flow and Heat Transfer Characteristics of Ammonium Alum Hydrate Slurries with Surfactants as Drag-Reducers and with Polyvinyl Alcohol as Stabilizers”, The 15th International Heat Transfer Conference, No. IHTC15-9469, 14pages, 10-15, August. Kyoto International Conference Center, Kyoto, Japan (2014)

49. Hiroshi Suzuki, Ruri Hidema, Yoshiyuki Komoda, “Size Effect of the Flow Path on the Flow and Heat Transfer Characteristics in a Cavity Swept by a Visco-Elastic Fluid”, The 15th International Heat Transfer Conference, No. IHTC15-9449, 15pages, 10-15, August. Kyoto International Conference Center, Kyoto, Japan (2014)

50. Yoshiyuki Komoda, Shigeyuki Kobayashi, Hiroshi Suzuki, Ruri Hidema, “Particle layer formation of gelled clay particle dispersions during drying”, 17th International Coating Science and Technology Symposium, 8pages, 7-10, September. Sheraton Carlsbad Resort, San Diego, CA (2014)

51. Hiroshi Suzuki, Koji Tanaka, Ruri Hidema, Yoshiyuki Komoda, “Size Effect Model on Flow and Heat Transfer Characteristics of Ammonium Alum Hydrate Slurries Treated with Surfactants”, 2014 AIChE ANNUAL MEETING, No. 377013, 8pages, 16-21, November. Atlanta Marriott Marquis, Hilton Atlanta, Atlanta, GA, USA (2014)

52. Ruri Hidema, Hiroshi Suzuki, Yoshiyuki Komoda, “Elastic Instability of Hyaluronate Solution in Micro Abrupt Contraction-Expansion Channels”, 2014 AIChE ANNUAL MEETING, No. 381883, 8pages, 16-21, November. Atlanta Marriott Marquis, Hilton Atlanta, Atlanta, GA, USA (2014)

53. Taiki Oka, Ruri Hidema, Hiroshi Suzuki, Yoshiyuki Komoda, “Effects of Contraction Ratio on Elastic Instability of Hyaluronate Solution in a Micro Channel”, ASME-JSME-KSME Joint Fluids Engineering Conference 2015, No. AJK2015-18556, 7pages, 26-31, July. Coex, Seoul, Korea (2015)

54. Ikumi Murao, Ruri Hidema, Hiroshi Suzuki, Yoshiyuki Komoda, “Rerationship between Velocity Field and Curvature of a Vortex in Two-Dimensional Turbulent Flow”, ASME-JSME-KSME Joint Fluids Engineering Conference 2015, No. AJK2015- 23582, 6pages,

26-31, July. Coex, Seoul, Korea (2015) 55. Hideki Sato, Ruri Hidema, Hiroshi Suzuki, Yoshiyuki Komoda, “A Study on Particle

Sedimentation Depression with Poly Vinyl Alcohol and Surfactant”, ASME-JSME-KSME Joint Fluids Engineering Conference 2015, No. AJK2015-23586, 6pages, 26-31, July. Coex, Seoul, Korea (2015)

56. Efrina, Yoshiyuki Komoda, Hiroshi Suzuki, Ruri Hidema, “Stress-Strain Relationship of a Cooked Japanese Rice in Squeezing Plates”, International Symposium on Rheology 2015, No. 3S03, 2 pages, 23-25, September, Kobe, Japan (2015), Oral

57. Ruri Hidema, Taiki Oka, Hiroshi Suzuki, Yoshiyuki Komoda, “Flow Characteristics of Sodium Hyaluronate Solution in Micro Planar Abrupt Contraction-Expansion Channels”, International Symposium on Rheology 2015, No. 3A03, 2 pages, 23-25, September, Kobe, Japan (2015), Oral

58. Ikumi Murao, Ruri Hidema, Hiroshi Suzuki, Yoshiyuki Komoda, “Effect of extension viscosity of polymer solution velocity fields in two-dimensional flows”, International Symposium on Rheology 2015, No. 3A11, 2 pages, 23-25, September, Kobe, Japan (2015), Oral

INVITED TALKS 1. Ruri Hidema, “Dynamics of bilayer membrane”, The Chemical Society of Japan, Tohoku

Branch. Tohoku University, 18th, September, Sendai, Japan (2011) 2. Ruri Hidema, “Effects of polymers on laminarization of thin fluids layer analyzed by Film

Interference Flow Imaging”, Japanese Society for Multiphase Flow. Nagoya University, 15th, November, Nagoya, Japan (2011)

3. Ruri Hidema, “Development of Film Interference Flow Imaging for analyses of complex fluids”, Central Research Institute of Mitsubishi Materials Corporation, 21th, March, Ibaraki, Japan (2012)

4. Ruri Hidema, “Visualization and controlling of water layer sandwiched by free surfaces”, Research center of interface science in Kobe University. Kobe University, 16th, November, Kobe, Japan (2012)

5. Ruri Hidema, “Dynamics of water layer sandwiched by free surfaces controlled by polymers”, The Society of Rheology, Japan. Kansai Branch, Kobe University, 11th, December, Kobe, Japan (2012)

6. Ruri Hidema, “Dynamics of two-dimensional flow sandwiched by free surfaces controlled by polymers”, The Heat Transfer Society of Japan, Kansai Branch. Campus Plaza Kyoto, 20th, December, Kyoto, Japan (2012)

7. Ruri Hidema, “Anisotropic structures induced by polymers in two-dimensional turbulent flows”, Collaborative Conference on 3D & Materials Research (CC3DMR) 2013. p. 323, 24-28 June, Jeju, Korea (2013)

8. Ruri Hidema, “Drag reduction effects observed in two-dimensional turbulence”, Nantong University, 27 July, Nantong, China (2013)

9. Ruri Hidema, “Study on dynamics of complex fluids”, The Society of Chemical Engineers, Japan, Fluids and Particle Processing Division. Daicel corporation, 9th, January, Hyogo, Japan (2015)

10. Ruri Hidema, “Hierarchical flow characteristics of dilute complex fluids”, Department of

Chemical and Materials Engineering, National Central University, TaiwanZhongli City, Taoyuan County 320, Taiwan. 22nd, June (2015)

11. Ruri Hidema, “Flow Characteristics of Dilute Polymer Solution Observed in Micro to Macro scale”, Department of Polymer Science and Engineering, Inha University, Incheon City, 402-751, Korea, 25th, July (2015)

PRESENTATIONS LIST IN INTERNATIONAL CONFERENCE 1. Ruri Hidema, Zenji Yatabe, Chihiro Hashimoto, Robert Pansu, Hideharu Ushiki, “New

Approach to Effects of Polymer in Flowing Soap Films -Some Methods of Image Processing-”, The 8th Asian Thermophysical Properties Conference, Fukuoka, Japan, August (2007), Poster

2. Ruri Hidema, Hideharu Ushiki, Qing Zhou, Pierre Audebert, Robert B Pansu, “Tetrazine a new familly of fluorescent crystals”, Journées de Printemps du Groupe Francais de Photochimie, Brest, France, May (2008), Oral

3. Ruri Hidema, Carine Julien, Hideharu Ushiki, Qing Zhou, Pierre Audebert, Antoine Courjaud, Eric Mottay, Robert B Pansu, “Video FLIM Using a Versatile Short Pulse Laser Source”, Focus on Microscopy Conference, Krakow, Poland, April (2009), Oral

4. Ruri Hidema, Hidemitsu Furukawa, Hideharu Ushiki, “Polymer in Flowing Soap Films: Its Effect on Two-Dimensional Turbulence Studied by a New Imaging Analysis”, The International Chemical Congress of Pacific Basin Societies, Hawaii, USA, December (2010) , Oral

5. Keiichi Sugita, Ruri Hidema, Hidemitsu Furukawa “3D Optical Forming of High-Strength Gels”, The International Chemical Congress of Pacific Basin Societies, Hawaii, USA, December (2010), Oral

6. Ruri Hidema, Hidemitsu Furukawa, Hideharu Ushiki, “Polymer Effects on Turbulence in Flowing Soap Films Studied with Film Interference Flow Imaging Method”, JSME/ASME 2011 International Conference on Materials & Processing, Oregon, USA, June (2011) , Oral

7. Tomohiro Yokoo, Ruri Hidema, Hidemitsu Furukawa, “Novel Optical Devices Developed with High-Strength Gels”, JSME/ASME 2011 International Conference on Materials & Processing, Oregon, USA, June (2011), Poster

8. Go Takada, Ruri Hidema, Hidemitsu Furukawa, “Development of Ultrahigh Ductile Gels”, JSME/ASME 2011 International Conference on Materials & Processing, Oregon, USA, June (2011), Poster

9. Hidemitsu Furukawa, Ruri Hidema, “Fast and Slow Relaxation Modes in Shrunken Phase of Thermoresponsible N-Isopropylacrilamide Gels Studied with Scanning Microscopic Light Scattering (SMILS)”, JSME/ASME 2011 International Conference on Materials & Processing, Oregon, USA, June (2011), Oral

10. Ruri Hidema, Hidemitsu Furukawa, “Polymer Stretching in Bilayer Liquid Studied with Film Interference Flow Imaging (FIFI)”, International Symposium on Surface Science, Funabori, Japan, December (2011), Oral

11. Tomohiro Yokoo, Ruri Hidema, Hidemitsu Furukawa, “Smart Lenses Developed with High-Strength and Shape Memory Gels”, International Symposium on Surface Science,

Funabori, Japan, December (2011), Oral 12. Go Takada, Ruri Hidema, Hidemitsu Furukawa, “Ultrahigh Ductile Gels Having Inter

Crosslinking Network (ICN) Structure”, International Symposium on Surface Science, Funabori, Japan, December (2011), Poster

13. Ruri Hidema, Naoya Yamada, Hidemitsu Furukawa, “Diagnosis at a glance of biological non-Newtonian fluids with Film Interference Flow Imaging (FIFI)”, SPIE 2012 Smart Structures/NDE, PaperNo. 8341-48, San Diego, USA, March (2012), Poster

14. Hidemitsu Furukawa, Mayumi Yoshizawa, Kyoko Yamada, Toshiyuki Watanabe, Ruri Hidema, Kazuyuki Horie, “Photo-responsible gel actuator developed with scanning microscopic light scattering”, SPIE 2012 Smart Structures/NDE, PaperNo. 8341-62, San Diego, USA, March (2012), Oral

15. Yoshitaka Amano, Ruri Hidema, Hidemitsu Furukawa, “An inter-crosslinking network gels that has both shape memory and high ductility”, SPIE 2012 Smart Structures/NDE, PaperNo. 8341-86, San Diego, USA, March (2012), Poster

16. Sho Harada, Ruri Hidema, Hidemitsu Furukawa, “Soft and wet actuator developed with responsible high-strength gels”, SPIE 2012 Smart Structures/NDE, PaperNo. 8341-87, San Diego, USA, March (2012), Poster

17. Jin Gong, Sho Harada, Ruri Hidema, Hidemitsu Furukawa, “Intelligent Button Developed with Smart Soft and Wet Materials”, International Symposium of Progress and Innovation of Smart Materials and Related Technology (PI-SMART 2012), PaperNo. Poster Session 10, Hirosaki, Japan, April (2012), Poster

18. Yoshitaka Amano, Ruri Hidema, Hidemitsu Furukawa, “Creation of Shape Memory Gels with Inter-Crosslinking Network Structure”, International Association of Colloid and Interface Scientists Conference, PaperNo. S1F15, Sendai, Japan, May (2012), Oral

19. Sho Harada, Ruri Hidema, Hidemitsu Furukawa, “Intelligent Button Developed with Smart Soft and Wet Materials”, International Association of Colloid and Interface Scientists, Conference, PaperNo. S1F16, Sendai, Japan, May (2012), Oral

20. Ruri Hidema, Naoya Yamada, Shingo Harada, Hiroshi Suzuki, Hidemitsu Furukawa, “Flow Control by Polymers Studied with Film Interference Flow Imaging”, Advanced Dynamics and Model Based Control of Structures and Machines, Saint Petersburg, RUSSIA, July (2012), Oral

21. Hidemitsu Furukawa, Ruri Hidema, Go Takada, Yoshitaka Amano, “Swelling and elasticity of gels with intercrosslinking network structure”, Advanced Dynamics and Model Based Control of Structures and Machines, Saint Petersburg, RUSSIA, July (2012), Oral

22. Hiroshi Suzuki, Makoto Fujii, Taketo Fudaba, Yoshiyuki Komoda, Toru Ishigami, Ruri Hidema, “Solidification heat transfer characteristics of ammonia alum hydrate slurries treated with drag-reducing surfactants”, 10th IIR Conference on Phase-Change Materials and Slurries for Refrigeration and Air Conditioning, PaperNo. O-24, Kobe, Japan (2012), Oral

23. Takafumi. Toyoda, Hiroshi Suzuki, Yoshiyuki Komoda, Ruri Hidema, “Adsorption characteristics of ammonia alum hydrate particles onto the coated metal”, 10th IIR Conference on Phase-Change Materials and Slurries for Refrigeration and Air Conditioning, PaperNo. P-3, Kobe, Japan (2012), Poster

24. Hidemitsu Furukawa,  Jin Gong, Yoshitaka Amano, Go Takada, Ruri Hidema, “Smart Hydrogels

Developed With InterCrosslinking Network (ICN) Structure”, 3rd Asian Symposium on Materials and Processing, Indian Institute of Technology Madras, PaperNo. Session IA, Hall 1, Chennai, India, August 30 (2012), Oral (Contribution Paper)

25. Jin Gong, Yusuke Watanabe, Ruri Hidema, Hidemitsu Furukawa, “Creating Standards For Soft And Wet Industrial Materials”, 3rd Asian Symposium on Materials and Processing, PaperNo. Session IA, Hall 1, Indian Institute of Technology Madras, Chennai, India, August 30 (2012), Oral (Contribution Paper)

26. Masato Wada, Jin Gong, Ruri Hidema, Hidemitsu Furukawa, “Surface And Bulk Mechanical Properties Of Soft And Wet Materials”, 3rd Asian Symposium on Materials and Processing, PaperNo. Poster No.7, Indian Institute of Technology Madras, Chennai, India, August 30 (2012), Poster (Contribution Paper)

27. Hisato Muroi, Jin Gong, Ruri Hidema, Hidemitsu Furukawa, “Optical 3D Printing Of Soft And Wet Industrial Materials”, 3rd Asian Symposium on Materials and Processing, PaperNo. Poster No.8, Indian Institute of Technology Madras, Chennai, India, August 30 (2012), Poster (Contribution Paper)

28. Keisuke Maekawa, Jin Gong, Yusuke Watanabe, Yosuke Watanabe, Ruri Hidema, Hidemitsu Furukawa, “Structural Analysis And Mechanical Properties Of Dry-Synthesis Gels”, 3rd Asian Symposium on Materials and Processing, PaperNo. Poster No.9, Indian Institute of Technology Madras, Chennai, India, August 30 (2012), Poster (Contribution Paper)

29. Ruri Hidema，Hiroshi Suzuki, Yoshiyuki Komoda, Hidemitsu Furukawa, “Single Image Turbulence Analysis for Drag Reduction Affected by Flexibility of Polymers”, 2012 AIChE ANNUAL MEETING, No.142ag, David L. Lawrence Convention Center, Pittsburgh, USA, 28 October - 2 November (2012), Poster

30. Yuto Furukawa, Hiroshi Suzuki, Yoshiyuki Komoda, Ruri Hidema, “Characteristics of oxygen-dissolution accelerated by use of micro-bubbles in a viscoelastic fluid”, International Workshop on Process Intensification 2012, Korea University, Seoul, Korea, November (2012), Oral

31. Saki Senda, Yoshiyuki Komoda, Hiroshi Takeda, Yushi Hirata, Ruri Hidema, Hiroshi Suzuki, “Poor mixing regions in an intensive mixing region induced by a rotationally reciprocating impeller”, International Workshop on Process Intensification 2012, Korea University, Seoul, Korea, November (2012), Oral

32. Takuya Tano, Hiroshi Suzuki, Yoshiyuki Komoda, Ruri Hidema, Makoto Fujii, “Phase separation characteristics of ammonium alum hydrate with polyvinyl alcohol”, International Workshop on Process Intensification 2012, Korea University, Seoul, Korea, November (2012) , Oral

33. Ruri Hidema, Hiroshi Suzuki, Yoshiyuki Komoda, “Energy transfer in drag reduction of two-dimensional turbulence studied by frequency analysis”, International Workshop on Process Intensification 2012, Korea University, Seoul, Korea, November (2012), Oral

34. Hirohiko Aihara, Hiroshi Suzuki, Tomohisa Katsuda, Yoshiyuki Komoda, Ruri Hidema, Makoto Fujii, “Phase separation characteristics of ammonium alum hydrate with polyvinyl alcohol”, International Workshop on Process Intensification 2012, Korea University, Seoul, Korea, November (2012), Oral

35. Ruri Hidema, Hiroshi Suzuki, Yoshiyuki Komoda, Hidemitsu Furukawa, “Extensional Viscosity of Semi-Dilute Polymer Solution Effect on Two-Dimensional Turbulence”, No.155, The 23rd International Symposium on Transport Phenomena, The University of Auckland, New Zealand, 19-22 November (2012), Oral

36. Hiroshi Suzuki, Yuta Higuchi, Yoshiyuki Komoda, Ruri Hidema, “Effect of the Molar Ratio of

Counter-Ions on Flow Characteristics of Surfactant Solutions Sweeping Cavities”, No.156, The 23rd International Symposium on Transport Phenomena, The University of Auckland, New Zealand, 19-22 November (2012), Oral

37. Yasuhiro Chizaki, Yoshiyuki Komoda, Hiroshi Suzuki, Ruri Hidema, “Transition of the Viscoelastic Behavior of Concentrated Slurry in the Dispersion Process”, Proceedings of The 5th Asian Coating Workshop (ACW2013) P.19, 9-10 May (2013), Hana Square, Korea University, Seoul, Korea, Oral

38. Nobuhiko Furuse, Yoshiyuki Komoda, Hiroshi Suzuki, Ruri Hidema, “Destruction Process of Particle Aggregates in a Startup Flow Generated within Rotational Parallel Disks”, Proceedings of The 5th Asian Coating Workshop (ACW2013) P.24-25, 9-10 May (2013), Hana Square, Korea University, Seoul, Korea, Oral

39. Ruri Hidema, Shion Hisamatsu, Hiroshi Suzuki, Yoshiyuki Komoda, “Drag-reducing surfactant effects on two-dimensional turbulent flow”, No. 4c.3, 8th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Lisboa, Portugal, 16-20 June (2013), Oral

40. Hiroshi Suzuki, Takuya Tano, Kouji Tanaka, Ruri Hidema, Yoshiyuki Komoda “Flow and heat transfer characteristics on ammonia alum hydrate slurries with surfactants and stabilizers”, No. 4a.4, 8th World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Lisboa, Portugal, 16-20 June (2013), Oral

41. Ruri Hidema, “Anisotropic structures induced by polymers in two-dimensional turbulent flows”, Collaborative Conference on 3D & Materials Research (CC3DMR) 2013, p. 323, 24-28 June (2013), Oral, invited talk

42. Koji Tanaka, Takuya Tano, Hiroshi Suzuki, Ruri Hidema, Yoshiyuki Komoda, “Pipe Size Effects on Flow and Heat Transfer of Ammonia Alum Hydrate Slurries Treated with Surfactants”, 9th World Congress of Chemical Engineering, No. MoP-T1-108, 18-23, August. Coex, Seoul, Korea (2013), Poster

43. Naoki Sawa, Hiroshi Suzuki, Ruri Hidema, Yoshiyuki Komoda, “Microscopic Observation of Marangoni Convection Characteristics in Absorbents with Surfactants Using For an Absorption Chiller”, 9th World Congress of Chemical Engineering, No. MoP-T1-109, 18-23, August. Coex, Seoul, Korea (2013), Poster

44. Shion Hisamatsu, Ruri Hidema, Hiroshi Suzuki, Yoshiyuki Komoda, “Development of an Extensional Viscosity Measurement Method For Low Viscous Polymer Solutions with an Abrupt Contraction Flow”, 9th World Congress of Chemical Engineering, No. MoP-T1-111, 18-23, August. Coex, Seoul, Korea (2013), Poster

45. Ruri Hidema, Hiroshi Suzuki, Yoshiyuki Komoda, “Drag Reduction Effects Due to Polymer Extensional Viscosity Analyzed By Two-dimensional Turbulent Flow”, 9th World Congress of Chemical Engineering, No. WeO-T129A-3, 18-23, August. Coex, Seoul, Korea (2013), Oral

46. Takahito Shiraki, Ruri Hidema, Hiroshi Suzuki, Yoshiyuki Komoda, “Development of an Extensional Viscosity Measurement Method For Low Viscous Polymer Solutions with an Abrupt Contraction Flow”, 9th World Congress of Chemical Engineering, No. WeO-T129B-1, 18-23, August. Coex, Seoul, Korea (2013), Oral

47. Ruri Hidema, Hiroshi Suzuki, Junpei Mori, Yoshiyuki Komoda, “Intermittent Gas/Liquid

Interfaces in a Micro-Channel for Liposome Production”, 2013 AIChE ANNUAL MEETING, No. 334575, 3-8, November. Hiton San Fransisco, Union Square, San Francisco, CA, USA (2013), Poster

48. Hiroshi Suzuki, Koji Masuda, Ruri Hidema, Yoshiyuki Komoda, “Numerical Simulation On Unsteady Dispersion Characteristics of Particles in a Flow Between Coaxial Cylinders”, 2013 AIChE ANNUAL MEETING, No. 334568, 3-8, November. Hiton San Fransisco, Union Square, San Francisco, CA, USA (2013), Poster

49. Saki Senda, Yoshiyuki Komoda, Hiroshi Takeda, Yushi Hirata, Ruri Hidema, Hiroshi Suzuki, “IntermiCharacteristics of Fluid Deformation Induced By a Rotationally Reciprocating Impeller”, 2013 AIChE ANNUAL MEETING, No. 334236, 3-8, November. Hiton San Fransisco, Union Square, San Francisco, CA, USA (2013), Oral

50. Yoshiyuki Komoda, Taishi Yamane, Hiroshi Suzuki, Ruri Hidema, “Development of Particle Packed Layer in the Drying Process of Latex Paints”, 2013 AIChE ANNUAL MEETING, No. 334994, 3-8, November. Hiton San Fransisco, Union Square, San Francisco, CA, USA (2013), Oral

51. Hiroshi Suzuki, Taketo Fudaba, Keiko Fujioka, Ruri Hidema, Yoshiyuki Komoda, “Heat And Mass Transfer Characteristics in a Calcium Chloride/Expanded Graphite Cell in a Chemical Heat Pump”, International Symposium on Innovative Materials for Processes in Energy Systems 2013, 4-6, September. Fukuoka, Japan (2013), Poster

52. Ruri Hidema, Hiroshi Suzuki, Keiichiro Tanomura, Yoshiyuki Komoda, “Micro-Fluidic Behavior Near Gas/Liquid Interface on Liposome Production in a Micro-Channel”, 5th International Conference on HEAT TRANSFER and FLUID FLOW in MICROSCALE, 22-25, April. Aix Marseille University, Marseilles, France (2014), Oral

53. Hiroshi Suzuki, Ruri Hidema, Yoshiyuki Komoda, “Flow Characteristics in a Micro-Cavity Swept by a Visco-Elastic Fluid”, 5th International Conference on HEAT TRANSFER and FLUID FLOW in MICROSCALE, 22-25, April. Aix Marseille University, Marseilles, France (2014), Oral

54. Hiroki Okada, Taishi Yamane, Yoshiyuki Komoda, Hiroshi Suzuki, Ruri Hidema, “Particle Accumulation Analysis of Latex Dispersion in a One-Dimensional Drying Process”, 6th Asian Coating Workshop ACW2014, No. P22, 8-9, May. Kobe University, Kobe, Japan (2014), Poster

55. Yudai Tanaka, Yoshiyuki Komoda, Hiroshi Suzuki, Ruri Hidema, “Microrheological investigation on the local structural change of dilute polymer solutions with drying”, 6th Asian Coating Workshop ACW2014, No. P23, 8-9, May. Kobe University, Kobe, Japan (2014), Poster

56. Ruri Hidema, “Effects of Extensional Rates on Characteristic Scales of Two-dimensional Turbulence in Polymer Solutions”, XXI Fluid Mechanics Conference, No. E-7, 15-18, June. AGH University of Science, Krakow, Poland (2014), Oral

57. Hiroshi Suzuki, Hideki Satoh, Ruri Hidema, Yoshiyuki Komoda, “Bulge Structure in a Cavity Swept by a Viscoelastic Fluid”, XXI Fluid Mechanics Conference, No. NN-2, 15-18, June. AGH University of Science, Krakow, Poland (2014), Oral

58. Yoshiyuki Komoda, Yasuhiro Chizaki, Hiroshi Suzuki, Ruri Hidema, “Rheological Investigation on the Dispersion Process of Slurry for Li-ion Battery Electrode”, No. OR029, 6th Pacific Rim Conference on Rheology, 20-25, July. Melbourne, Australia (2014), Oral

59. Hiroshi Suzuki, Ruri Hidema, Yoshiyuki Komoda, “Flow Fluctuation in a Micro-Cavity Swept by a Visco-Elastic Fluid”, No. OR065, 6th Pacific Rim Conference on Rheology, 20-25, July.

Melbourne, Australia (2014) 60. Koji Masuda, Hiroshi Suzuki, Yoshiyuki Komoda, Ruri Hidema, “Characteristics of the

Unsteady Dispersion of Fine Particles in a Cylinder with an Elliptic Rotor”, No. OR068, 6th Pacific Rim Conference on Rheology, 20-25, July. Melbourne, Australia (2014)

61. Ruri Hidema, Hiroshi Suzuki, Takaaki Sasaki, Yoshiyuki Komoda, “Flow Behavior of Sodium Hyaluronate Solution in a Micro Abrupt Contraction-Expansion Channel”, No. OR075, 6th Pacific Rim Conference on Rheology, 20-25, July. Melbourne, Australia (2014)

62. Ruri Hidema, Hiroshi Suzuki, Takuya Tano, Yoshiyuki Komoda, “Flow and Heat Transfer Characteristics of Ammonium Alum Hydrate Slurries with Surfactants as Drag-Reducers and with Polyvinyl Alcohol as Stabilizers”, The 15th International Heat Transfer Conference, No. IHTC15-9469, 10-15, August. Kyoto International Conference Center, Kyoto, Japan (2014) , Oral

63. Hiroshi Suzuki, Ruri Hidema, Yoshiyuki Komoda, “Size Effect of the Flow Path on the Flow and Heat Transfer Characteristics in a Cavity Swept by a Visco-Elastic Fluid”, The 15th International Heat Transfer Conference, No. IHTC15-9449, 10-15, August. Kyoto International Conference Center, Kyoto, Japan (2014) , Oral

64. Yoshiyuki Komoda, Shigeyuki Kobayashi, Hiroshi Suzuki, Ruri Hidema, “Particle layer formation of gelled clay particle dispersions during drying”, 17th International Coating Science and Technology Symposium, 7-10, September. Sheraton Carlsbad Resort, San Diego, CA (2014)

65. Hiroshi Suzuki, Koji Tanaka, Ruri Hidema, Yoshiyuki Komoda, “Size Effect Model on Flow and Heat Transfer Characteristics of Ammonium Alum Hydrate Slurries Treated with Surfactants”, 2014 AIChE ANNUAL MEETING, No. 377013, 16-21, November. Atlanta Marriott Marquis, Hilton Atlanta, Atlanta, GA, USA (2014)

66. Ruri Hidema, Hiroshi Suzuki, Yoshiyuki Komoda, “Elastic Instability of Hyaluronate Solution in Micro Abrupt Contraction-Expansion Channels”, 2014 AIChE ANNUAL MEETING, No. 381883, 16-21, November. Atlanta Marriott Marquis, Hilton Atlanta, Atlanta, GA, USA (2014)

67. Hideki Sato, Hiroshi Suzuki, Ruri Hidema, Yoshiyuki Komoda, “Investigation of Flow Characteristics in a Cavity Swept by a Visco-Elastic Fluid”, The 10th International Workshop for East Asian Young Rheologists, No. P.44, 4-7, February. Kyusyu University, Fukuoka, Japan (2015), Poster

68. Taiki Oka, Ruri Hidema, Hiroshi Suzuki, Yoshiyuki Komoda, “Flow Behaviors of Hyarulonate Solutions Through Micro Abrupt Contraction-Expansion Channels”, The 10th International Workshop for East Asian Young Rheologists, No. P.59, 4-7, February. Kyusyu University, Fukuoka, Japan (2015), Poster

69. Ruri Hidema, Takahito Shiraki, Hiroshi Suzuki, Yoshiyuki Komoda, “Development of an extensional viscosity measurement method for low viscos polymer solution with an abrupt contraction flow”, 10th Annual European Rheology Conference, No. AT-21, 14-17, April. La Cité, le Centre des Congrès de Nantes, Nantes, France (2015) , Oral

70. Hiroshi Suzuki, Ruri Hidema, Yoshiyuki Komoda, “Effect of cavity length on the instability in the micro-cavity swept by a visco-elastic fluid”, 10th Annual European Rheology Conference, No. PO174, 14-17, April. La Cité, le Centre des Congrès de Nantes, Nantes, France (2015) , Poster

71. Daisuke Ishikawa, Yoshiyuki Komoda, Hiroshi Suzuki, Ruri Hidema, “Effect of substrate hydrophilicity on the particle accumulation in the drying of particle dispersion”, The 7th Asian Coating Workshop, No. P.35, 7-8, May, Institute of Industry Technology, GuangZhou & Chinese Academy of Science, Nansha, Guangzhou, China (2015) , Poster

72. Yudai Tanaka, Yoshiyuki Komoda, Hiroshi Suzuki, Ruri Hidema, “Microrheological investigation of drying process of polymer solution droplet”, The 7th Asian Coating Workshop, No. P.36, 7-8, May, Institute of Industry Technology, GuangZhou & Chinese Academy of Science, Nansha, Guangzhou, China (2015) , Poster

73. Yoshiyuki Komoda, Saki Senda, Noriyuki Yamagami, Yushi Hirata, Hiroshi Suzuki, Ruri Hidema, "Torque variation of a rotationally reciprocating plate impeller and its relationship with fluid flow in a cylindrical vessel", the Azimut Hotel, 15th European Conference on Mixing, 28 June - 3 July, Saint-Petersburg, Russia (2015) , Oral

74. Ruri Hidema, Taiki Oka, Hiroshi Suzuki, Yoshiyuki Komoda, “Elastic Instability of Biopolymer Solutions in Micro Abrupt Contraction-Expansion Channels”, International Conference on Nanospace Materials, 23-25, June, National Taiwan University, Taipei, Taiwan (2015) , Poster

75. Taiki Oka, Ruri Hidema, Hiroshi Suzuki, Yoshiyuki Komoda, “Effects of Contraction Ratio on Elastic Instability of Hyaluronate Solution in a Micro Channel”, ASME-JSME-KSME Joint Fluids Engineering Conference 2015, No. AJK2015-18556, 7pages, 26-31, July. Coex, Seoul, Korea (2015), Oral

76. Ikumi Murao, Ruri Hidema, Hiroshi Suzuki, Yoshiyuki Komoda, “Rerationship between Velocity Field and Curvature of a Vortex in Two-Dimensional Turbulent Flow”, ASME-JSME-KSME Joint Fluids Engineering Conference 2015, No. AJK2015- 23582, 6pages, 26-31, July. Coex, Seoul, Korea (2015) , Oral

77. Hideki Sato, Ruri Hidema, Hiroshi Suzuki, Yoshiyuki Komoda, “A Study on Particle Sedimentation Depression with Poly Vinyl Alcohol and Surfactant”, ASME-JSME-KSME Joint Fluids Engineering Conference 2015, No. AJK2015-23586, 6pages, 26-31, July. Coex, Seoul, Korea (2015) , Oral

78. Efrina, Yoshiyuki Komoda, Hiroshi Suzuki, Ruri Hidema, “Stress-Strain Relationship of a Cooked Japanese Rice in Squeezing Plates”, International Symposium on Rheology 2015, No. 3S03, 23-25, September, Kobe, Japan (2015), Oral

79. Ruri Hidema, Taiki Oka, Hiroshi Suzuki, Yoshiyuki Komoda, “Flow Characteristics of Sodium Hyaluronate Solution in Micro Planar Abrupt Contraction-Expansion Channels”, International Symposium on Rheology 2015, No. 3A03, 23-25, September, Kobe, Japan (2015), Oral

80. Ikumi Murao, Ruri Hidema, Hiroshi Suzuki, Yoshiyuki Komoda, “Effect of extension viscosity of polymer solution velocity fields in two-dimensional flows”, International Symposium on Rheology 2015, No. 3A11, 23-25, September, Kobe, Japan (2015), Oral

81. Hiroshi Suzuki, Ruri Hidema, Yoshiyuki Komoda, “Flow instability in a mmicro-cavity swept by a visco-elastic fluid”, The Society of Rheology 87th Annual Meeting, No. NF26, 12-15, October, 2015, Baltimore, Maryland (2015), Oral

82. Ruri Hidema, Taiki Oka, Hiroshi Suzuki, Yoshiyuki Komoda, “Effects of contraction ratio on elastic instability of sodium hyaluronate soution in a micro channel”, The Society of Rheology

87th Annual Meeting, No. MN9, 12-15, October, 2015, Baltimore, Maryland (2015), Oral