t'5cx series

16

15

3

14

13 __,

12

11

112

HandieExternal interface hatch(USB port)lnstrument height markBattery coverOperation panelSerialC

lar level adjusting screwsBase plateLevelling foot screwOptical plummet focussing ringOptical plummet

Display unitObjective lens(l ncludes Laser-pointer function)Handle locking screwTubular compass slotVertical fine motion screw N

Vertical clampSpeakerTrigger keyHorizontal clampHo.rjzontal fine motion screwTribrach clampl€lesvepo ayaniec€| screw

"Tebscope focussing rrngSignting.Silnstrument center rr rark

3--4

5678

I

6 10

'1112

1415

2827

2625

?---J

3

1920

21

18

2

11

*',,-I

t' ;:* 4. CX FUNCTIONS

@ Sighting cottimatorUse sighting collimator to aim the CX in the direction of the measurementpoint. Turn the instrument untilthe triangle in the sighting collimator isaligned with the target.

@ lnstrument height markThe height of the CX is as follows:

. 192.5mm (from tribrach mounting surface to this mark)

. 236mm (from tribrach dish (TR-102) to this mar*)"lnstrument height" is input when setting instrument station data and is theheight from the measuring point (where CX is mounted) to this mark.

Press the trigger key when the CX is in the OBS mode or when FIEASI/[sToPI is indicated on the display unit. You can starUstop measurement.ln the screen displaying [AUTOI, press trigger key to perform automaticoperation from distance measurement to recording.

@ Trisger Key

@] Laser-pointerFunctionA target can be sighted with a red laser beam in dark locations without theuse of the telescope.

12

:= '-l

4. CX FUNCTTONS

Operation panel

G "5.1 Basic Key Operation"

Display unit

Softkey selec'tion

Guide light

Star key {a}lllumination keytif.tPower key

1,,,to{e}]{o}, {.},{+/-}

{ENT}

@@@@@@@@@@

@@@

Guide light

@ nu,o" rishtSettingout measurement etc. can be carried out effectively using the Guidelight. The Guide light is composed of a light that is divided into a red and agreen light. A poleman can ascertain the present position by checking theGuide light color.

red

(\Mren seen from the objective lens sidewhile the instrument is in the Face 1 state)

13

\

4. CX FUNCTTONS

Guide light statue

Light statue Meaning

Red (From position of poleman) Move target left

Green (From position of poleman) Move target right

Red and Green Target is at correct horizontal position

\Mten the guide light is turned ON, it is displayed as a symbol in the displayunit.

G " 5.2 Display Functionsrr

Handle

The handle @n be removed from theinstrument. To remove it, loosen thehandle locking screw. locking screw

. To remove the handle, hold bothsides of the handle and lift it straightabove. lf you hold the handle by onehand or incline it, the terminalattached on the handle may bedamaged.

14

4. CX FUNCTIONS

Star key ModeReflector :M tLaser lev, :

lllum.hold :Laser SL-pointer :Off

Tilt crn :Yes(H, V)Contrast :10Reticle lev :3

Press <Enter> key y

IEEilIArea calc.S4 LineS-OArcP-ProjectPt to line

0t':-:ii

k:l?

B,

ffi&'=ff'tffi'

Status Screen

P.1

Gonflguratlon Mode

OBS PC Oppm

SDSzA 89.59 ' 50'

OBS Mode

{Erc} ,&,W toffisl

P,2P.1

Knoam dataCode

Data Mode

@Change PassrrvordDate and time

lnstr.configlnstr.constComms sefupUnit

P,2

CX-105C rec 9999s/N 123456Date 2014101101Time 12:00:00Job.JOBl 1

P.2

CX-105C rec 9999stN 123456Ver. XXX-XX-XX

xxx-xx-xxJob.JOBl V

USBrsEUITulEILoad known PTSave codeLoad codeFile status

USB iiode

15

toN) Power On

toN)(Press and hold:About 1 second)

Power Off

Leam basic key operations here before you read each measurement procedure.G Uocation of operation keys on the panel: "4.1 Parts of the tnstrument"

r Power ON / OFF

o Switching target typeTarget type can be switched only on the screen where the target symbol (ex.

ClTarget symboldisplayed:"5.2 Display Functions", Switching betrveen targettypes in the star Key mode: "5.3 star Key Mode", switching the target typein Config mode": "33.2 EDM Settings"

o Switchi the Laser uide light ON/OFF

' After tuming ON the laser-pointer/guide light, the laser beam is emitted for Sminutes, and then automatically switches OFF. But in the Status screen andwhen target symbol (ex. B ) is not displayed in the OBS mode, the laser beamis not automatically turned off.

Switch the screen/key backlight and Reticle il-lumination On / Off

f.+) Press and hold) To turn the laser-pointer/guide light ON/OFIand hold until a beep sounds.

G Sebcting laser-pointer/g uide light " g3.2 E DM Setti ngs,'

16

r Softkey operationare on the bottom line of the screen.

{F1} to {F4} Select the function matching the softkevs

{FUNC} Toggle between OB$ mode screen pages(when more than 4 softkeys are allocated)

rl urestsHIFTI Switch between numeric and alphabetic char-

acters.

{0} to te} During numeric input, input number of the key.During alphabetic input, input the charactersdisplayed above the key in the order they arelisted.

t.ytr) lnput a decimal poinUplus or minus sign duringnumeric input.During alphabetic input, input the charactersdisplayed above the key in the order they arelisted.

T{/D} Right and left cursor/Select other option.

{ESG} Cancelthe input data.

{8.S.} Delete a character on the left.

tENTl SelecUaccept input word/value.

l

i

Example:Entering "JOB M" in the JOB name field1. Press {SHIFT) to enter the

alphabet input modeAlphabet input mode is indicatedby an'A" on the right of the screen.

2. Press {4}."J" is displayed.

3. Press {5} three times."O" is displayed.

4. Press {7} twice."8" is displayed.

5. Press pl trrice.lnput a blank space.

17

-t{

5. BASIC OPERATION

6. Press {5} once."M" is displayed. Press {ENT} tocomplete inputting.

r Selecting options{.'}r{v} Up and down cursor

Dvrc Right and left cursor/Select other option

{ENT} Accept the option

Example: Select a reflector type1. Press [EDM] in page 2 of OBS mode.

2. Move to "Reflecto/' using t1lrfV).3. Display the option you want to

select using DyrcSwitches between "Prism" and"Sheet".

4. Press {ENT) or tVl to move to thenext option.The selection is set and you canset the next item.

r Switchin modes

EDM

H3??".i51?ffiPC :0 Blllum.hold: Laser

v

From OBS mode (Observation Mode) to StarKey Mode

IcNFGI From Status mode to Config Mode (Configura-

From Status mode to OBS mode (Observation

From Status mode to USB ModeFrom Status mode to Data ModeReturn to the Status mode from each Mode

G"4.2 Mode Diagram"

Return to the previous screen

18

-g+E{=".*-\

5. BASIC OPERATION

CX-105C rec 9999s/N 123456Ver. XXX-XX-XX

XXX-XX-XXJob.JOB 1 VftEq ll$r IM

Status screen

Applicationsoftware

version

JOB

OBS mode screen

Distance *'t

Vertical angle *2

Horizontal aflgle*3

lnstrument nameI

Target'5

Prism constant value

Atmospheric correction factorRemaining battery power "4Tilt angle compensation *6

Page number

Measuring screen

Laser is emited "8

lnput screen

Previous page

lnput mode "9

Next page

* 1 DistanceCf Switching distance display status: "33.1 Configuration -Config Mode-"

SD: Slope distanceHD: Horizontal distanceVD: Height difference

OBS PC IO

SD SIZA r-,ii:fnA-n , m

00B

ETT.TI

DistF ine" r "

-r-.#

PCppm

erator

@

19

,/,

c':i' -,. 5. BASIC OPERATIONf'

" 2 Vertical angleG Switchinglerticalangle display status: "33.1 Configuration -Config Mode-,,

ZA: Zenith angle (Z=0)VA: Vertical angle (H=0/H=t90)

To switch vertical angle/slopein o/o, press [EII,VI!

* 3 HorizontalanglePress tR/L] to switch the display status.HA-R: Horizontal angle rightHA-L: Horizontal angle left

* 1,2,3To switch usual "SD, ZA, HA-R" display to "SD, HD, VD,, press ISHVI.

* 4 Remaining battery power (Temperature=25"C, EDM on)

Using BDC70Using extemalbattery

Battery level

I t level 3 Ful* povYer

T t level 2 Plenty of power remains.

,E t level 1 Half or less power remains.

I*

level 0 Little power remains.Charge the battery.

l-lgr,is symbot is disptayecevery 3 seconds)

No power remains.Stop the measurement and charge thebattery.

"6.1 Battery Charging"

*5 Target displayPress tSHlFTl to switch the selected target. This key function can be usedorly on the screens on which the target symbol is displayed.EI :prismEl :reflective sheet

* 6 Tilt angle compensationwren this symbol is disprayed, the vertical and horizontal angles areautomatically compensated for smalltilt enors using 2-axis tili sensor.lIJTilt compensation setting: "33.1 configuration -config ModeJ

20

f

+t :- ' .- \ 5. BASIC OPERATION

*7 Laseraointer/Guide\ght display *-G Seteeting Laseiaointer/Gd

./ /

S€tting$;€witching

t. -"

t \_=f'+l+-, r.b'

--\

-t':*-qp-\

*-t1r :-

-..<=..,,...€#a---

-ari

a:- - -.-G'-.. .1>+# \ ,*l

- - a:/"

b.

'.."a-