d com/sr1/18/3/001

REVISIONDRAWING REF.No.

SCALEDRAWN BY DATE

DRAWING TITLE

First Fence Ltd - Head office, Kiln Way, Swadlincote, Derbyshire, DE11 8EA

Telephone: +44 (0) 1283 512 111Email: [email protected] Website: www.firstfence.co.uk

For Approval to SR1

Gary 19/07/2019 VARIES

D

Rev Date Comments

COM/SR1/18/3/001

CHECKED BY

-

Combi™ 1.8-3.0m HighStandard Panel Elevation & Details

NOTES:

ALL MATERIALS TO CONFORM TO RELEVANT BRITISH STANDARDS

ALL PARTS TO BE GALVANISED AFTER MANUFACTURE, GALVANISING TO:BS, EN, ISO 1461

POLYESTER POWDER COATING ON REQUEST, POWDER COATING TO: BS 6497

FIRST FENCE COMBI SR1' HIGH SECURITY PALISADE FENCING 1.8M-3.0M HIGH A

STANDARD PANEL CONSISTS OF:

POSTSPART NUMBER:01

RAILSPART NUMBER:02

PALESPART NUMBER:03

FISHPLATEPART NUMBER:04

CENTRE RESTPART NUMBER:05

FIXINGS APART NUMBER:06

FIXINGS BPART NUMBER:07

FIXINGS CPART NUMBER:08

FIXINGS DPART NUMBER:09

FIXINGS EPART NUMBER:10

FIXINGS FPART NUMBER:11

WEIGHT:

- 1 No. 102 x 44 Rolled Steel JoistLength calculated as per below -Fence Height divided by 3 minus 75mm.

- 2 No. 45 x 45 x 6 Rolled Steel Angle 2730mmLong

- 17 No. 3mm Thick PalesLength calculated as per below -Fence Height above ground level minus 50mm.

- 2 No. 30 x 6mm Thick Flat Bar160mm Long

- 1 No. 30 x 6mm Thick Flat Bar335mm Long

- 4 No. M12 Cup Square Bolt30mm Long



- 4 No. M12 Anti Vandal Shear Nut

- 34 No. M8 Anti Vandal Shear Nut

- 17 No. M8 Nylock Nuts

- 44kgs PER METRE (1800MM HIGH)

PALESHOT ROLLED SLIT COIL S275 BS EN 10025:1993 3mm THICK & 77mm WIDE, THIS ISTHEN COLD FORMED INTO 'D' SECTION PALES 17 No PER STANDARD PANEL (2743mmPost Centres). THE PALES ARE HOLED TO SUIT SPECIFICATION AND ARE LOCKED INTOPOSITION BY MEANS OF M8 X 25mm BOLTS & M8 ANTI-VANDAL NUTS. AN ADDITIONALNUT (NYLOCK) SHOULD BE INSTALLED TO THE TOP RAIL AFTER THE SHEAR NUT HASBEEN SNAPPED OFF.

POSTS102mm x 44mm RSJ 2325mm** LONG POINTED AT TOP AND SLOTTED TOACCOMMODATE CONNECTING BARS.

HORIZONTAL SUPPORT RAILS45mm x 45mm x 6mm RSA. HORIZONTALS HAVE 'V' SHAPED SLOTS ON THE TOPFLANGE TO ACCOMMODATE INSERTION OF THE PALES AND HAVE 10mm DIAMETERHOLES WHICH HAVE A 21mm DIAMETER COUNTERBORE ON THE FRONT FACEALLOWING THE M8 BOLTS TO PASS THROUGH.

INTERMEDIATE SUPPORT30mm X 6mm FIXED BEHIND MIDDLE PALE ON BOTTOM RAIL.

FIXINGSM12 X 30mm CUP SQUARE BOLTS & M12mm SHEAR NUTS FOR FIXING THE RAILS TOTHE POSTS & AT INTERMEDIATE SUPPORT POINTS, M8 X 25mm CUP SQUARE BOLTS& M8 SHEAR NUTS FOR FIXING PALES TO RAILS.

ALL THE BOLTS SHOULD THEN BE TIGHTENED UNTIL THE HEXAGONAL HEAD SHEARSOFF THUS LEAVING A DOME ON EITHER SIDE, IF NO DOME IS EVIDENT THE FENCE ISNOT SECURED.

CAD A1

ELEVATIONSCALE 1:10

MacGregor

2750 STANDARD POST CENTRES (MIN 750MM - MAX 2750MM)

2730 STANDARD RAIL LENGTH

300*

1275

VAR

IES

WIT

H H

EIG

HT

OF

FEN

CE

225*

1800

** -

(APP

RO

VED

RAN

GE

1800

- 30

00) H

EIG

HT

OF

FEN

CE

ABO

VE G

RO

UN

D L

EVEL

1750

** O

VER

ALL

LEN

GTH

OF

PALE

LEN

GTH

OF

PALE

= F

ENC

E H

EIG

HT

MIN

US

50M

M

155 MAX PALE CENTRES

2325

** O

VER

ALL

POST

LEN

GTH

(HEI

GH

T O

F FE

NC

E +

EMBE

DM

ENT

LEN

GTH

= P

OST

LEN

GTH

)

525

**

50*

PART No:1 POST

PART No:1 POST

PART No:2 RAIL

PART No:2 RAIL

PART No:2 RAIL

END ELEVATIONSCALE 1:10

2325

**

306.

5*12

75**

744*

*

DETAIL D (CUT AWAY)FISHPLATE BAR, RAIL AND PALE ASSEMBLY

SCALE 1:2

DETAIL ESECTION HORIZONTALLY THROUGH FENCE

LINESCALE 1:2

Z Z

YX

YX

DETAIL CSECTION THROUGH FISHPLATE

SCALE 1:2

DETAIL BSECTION

THROUGH PALE AND BOTTOM RAILSCALE 1:2

PART No:3 PALE

PART No:3 PALE

PART No:2 RAIL

PART No:7 M8 CUP SQUAREBOLT

PART No:10 M8 ANTI VANDALSHEAR NUT


PART No:2 RAIL

PART No:2 RAIL

PART No:2 RAIL

PART No:2 RAIL

SLOT IN POST FORFISHPLATE TO PASS THROUGH

PART No:9 M12 ANTI VANDAL SHEARNUT

PART No:4 FISHPLATE

FISHPLATE PASSES THROUGH SLOTIN POST.

PART No:1 POST

PART No:7 & 10 M8 Cup SquareBolt and Anti Vandal Shear Nut.


PALES PASS THROUGH "VEE" SLOTSPUNCHED IN HORIZONTAL RAIL.

PART No:4 FISHPLATE


PART No:4 FISHPLATE

PART No:3 PALEPART No:1 POST


PART No:5 CENTRE REST

DETAIL ASECTION

THROUGH PALE AND TOP RAILSCALE 1:2

PART No:3 PALE

PART No:2 RAIL


PART No:10 M8 ANTI VANDALSHEAR NUT

PART No:11 M8 NYLOCKNUT (TOP RAILS ONLY)

A 28/10/19 M8 Nylock added to top pale fixing to rails.

350 x 350 x 800CONCRETE FOUNDATIONGRADE: C25 / ST 2

350 x 350 x 800CONCRETE FOUNDATION

GRADE: C25 / ST 2

FIXED DIMENSIONS FOR ALLHEIGHTS OF FENCE.

* EMBEDMENT LENGTH WORKEDOUT AS FOLLOWS

HEIGHT OF FENCE ÷ 3 - 75DIMENSION VARIES DEPENDING ONSPECIFIED HEIGHT, PLEASEREFER TO ELEVATION.

**

B 19/12/19 Amended to include various height available.

Approved to Network Rail Class 1A

C 14/01/20 Notes amended to show pale / post variables.

D 30/03/20 Cut out detail references amended.IMPORTANT NOTE FOR 3.0M HIGH PRODUCTS:

WHEN A 3.0M HIGH FENCE / GATE IS TO BE UTILISED THENAN ADDITIONAL RAIL MUST BE FITTED. THIS ADDITIONAL

RAIL MUST BE FITTED 825MM FROM FGL. THE CENTRES OFTHE TOP TWO RAILS MUST NEVER EXCEED 1875MM.

AutoCAD SHX Text

All rights reserved

AutoCAD SHX Text

The right of Lochrin Bain Ltd. to be the originator and owner of this work has been asserted in accordance with the Copyright, Patents and Designs Act 1988. This drawing may not be reproduced in whole or in part, stored in a retrieval system or transmitted by any means without the express permission of Lochrin Bain Ltd. PATENT PENDING UK PATENT APPLICATION NO. 000000.0

Chris

Cross-Out

FIRST FENCE

Chris

Inserted Text


SCALEDRAWN BY DATE

DRAWING TITLE


C

Rev Date Comments

COM/SR1/18/3/002

CHECKED BY

-

Combi™ 1.8-3.0m High Component Details

NOTES:

ALL MATERIALS TO CONFORM TO RELEVANT BRITISH STANDARDS

ALL PARTS TO BE GALVANISED AFTER MANUFACTURE, GALVANISING TO:BS, EN, ISO 1461

POLYESTER POWDER COATING ON REQUEST, POWDER COATING TO: BS 6497

'COMBI SR1' HIGH SECURITY PALISADE FENCING 1.8M-3.0M HIGH

A STANDARD PANEL CONSISTS OF:

POSTS - 1 No. 102 x 44 Rolled Steel JoistPART NUMBER:01 Length calculated as per below -

Fence Height divided by 3 minus 75mm.

RAILS - 2 No. 45 x 45 x 6 Rolled Steel AnglePART NUMBER:02 2730mm Long

PALES - 17 No. 3mm Thick Lochrin PalesPART NUMBER:03 Length calculated as per below -

Fence Height above ground level minus 50mm.

FISHPLATE - 2 No. 30 x 6mm Thick Flat BarPART NUMBER:04 160mm Long

CENTRE REST - 1 No. 30 x 6mm Thick Flat BarPART NUMBER:05 335mm Long

FIXINGS A - 4 No. M12 Cup Square BoltPART NUMBER:06 30mm Long

FIXINGS B - 33 No. M8 Cup Square BoltPART NUMBER:07 25mm Long

FIXINGS C - 1 No. M8 Cup Square BoltPART NUMBER:08 35mm Long

FIXINGS D - 4 No. M12 Anti Vandal Shear NutPART NUMBER:09

FIXINGS E - 34 No. M8 Anti Vandal Shear NutPART NUMBER:10

FIXINGS F - 17 No. M8 Nylock NutsPART NUMBER:11

WEIGHT: - 44kgs PER METRE (1800MM HIGH)

PALESHOT ROLLED SLIT COIL S275 BS EN 10025:1993 3mm THICK & 77mm WIDE, THIS ISTHEN COLD FORMED INTO 'D' SECTION PALES 17 No PER STANDARD PANEL (2743mmPost Centres). THE PALES ARE HOLED TO SUIT SPECIFICATION AND ARE LOCKED INTOPOSITION BY MEANS OF M8 X 25mm BOLTS & M8 ANTI-VANDAL NUTS. AN ADDITIONALNUT (NYLOCK) SHOULD BE INSTALLED TO THE TOP RAIL AFTER THE SHEAR NUT HASBEEN SNAPPED OFF.

POSTS102mm x 44mm RSJ 2325mm** LONG POINTED AT TOP AND SLOTTED TOACCOMMODATE CONNECTING BARS.

HORIZONTAL SUPPORT RAILS45mm x 45mm x 6mm RSA. HORIZONTALS HAVE 'V' SHAPED SLOTS ON THE TOPFLANGE TO ACCOMMODATE INSERTION OF THE PALES AND HAVE 10mm DIAMETERHOLES WHICH HAVE A 21mm DIAMETER COUNTERBORE ON THE FRONT FACEALLOWING THE M8 BOLTS TO PASS THROUGH.

INTERMEDIATE SUPPORT30mm X 6mm FIXED BEHIND MIDDLE PALE ON BOTTOM RAIL.

FIXINGSM12 X 30mm CUP SQUARE BOLTS & M12mm SHEAR NUTS FOR FIXING THE RAILS TOTHE POSTS & AT INTERMEDIATE SUPPORT POINTS, M8 X 25mm CUP SQUARE BOLTS& M8 SHEAR NUTS FOR FIXING PALES TO RAILS.

ALL THE BOLTS SHOULD THEN BE TIGHTENED UNTIL THE HEXAGONAL HEAD SHEARSOFF THUS LEAVING A DOME ON EITHER SIDE, IF NO DOME IS EVIDENT THE FENCE ISNOT SECURED.

CAD A1

MacGregor

PART NO:1102 X 44 RSJ POST

FRONT VIEWSCALE 1:10

END VIEWSCALE 1:10

44

2325

**

2325

**

102

304*

1275

**74

7**

25

20

DETAIL 1-1POST HEAD DETAIL

SCALE 1:2

DETAIL 1-2SLOT DETAIL TYPICAL

FOR 2 NoSCALE 1:2

38

10

R5

R5

PUNCHED SLOT

POST HEAD REFERTO DETAIL 1-1

PALE PLAN VIEWSCALE 1:2

PART No367x 23 x 3 THICK

PALE

3

67

23

PALE FRONTVIEW

SCALE 1:10

1750

**

300*

1275

**17

5*

67

10mm DIA PUNCHEDHOLE

10mm DIA PUNCHEDHOLE

DETAIL 2-1PALE HEAD

DETAILSCALE 1:2

69

67

FRONT VIEWSCALE 1:10PUNCHED SLOT REFER

TO DETAIL 3-1

PUNCHED HOLE& COUNTERBOREREFER TO DETAIL 3-1 PUNCHED SLOT REFER

TO DETAIL 3-1

PUNCHED HOLE& COUNTERBORE

REFER TO DETAIL 3-1

2730

125 155 155 155 155 155 155 155 155 155 155 155 155 155 155 155 155 125

45 45

PUNCHED "VEE" SLOTREFER TO DETAIL 3-2

125 155 155 155 155 155 155 155 155 155 155 155 155 155 155 155 155 125

45

45

PLAN VIEWSCALE 1:10

2730

29

25

14

25 X 14MMPUNCHED SLOT

10 DIA PUNCHED HOLEWITH 21 DIA COUNTERBORE

DETAIL 3-1 SLOT & HOLESCALE 1:2

DETAIL 3-2 "VEE" SLOTSCALE 1:2

45 45

65

R4.5

R4.5

R10

9

PART No.4PLAN VIEWSCALE 1:2

160

30 14

25

110 2525

PART No.7, 8, 9 & 11DETAILS

SCALE 1:1

30

M12 M8

25

8

6

SQUARESHANK

SQUARESHANK

SHEAR SECTIONOF NUT

SHEAR SECTIONOF NUT

30

335

16

PART No.5FRONT VIEW

SCALE 1:5

PART No. 245 X 45 X 6 RSA

Ø10

EXTERNAL CORNER PLANCOVERS 90° - 175° CORNERS

SCALE 1:5

INTERNAL CORNER PLANCOVERS 90° - 180° CORNERS

SCALE 1:5

90° - 175° 90° -

175°

HEX CORNER FISHPLATESUPPLIED TO SUIT 90° ANDBENT TO SUIT ANGLE OF FENCELINE ON SITE.

90° CORNER FISHPLATEBENT TO SUIT ANGLE OF FENCELINE ON SITE.

TOP OF ANGLECUT AND CHAMFEREDTO SUIT ON SITE.

CORNER DETAIL ARRANGEMENTUSING STANDARD POSTS

76

3676

6

15

NYLON INSERTIN THREAD OF NUT


FIXED DIMENSIONS FOR ALLHEIGHTS OF FENCE.

*

DIMENSION VARIES DEPENDING ONSPECIFIED HEIGHT, PLEASEREFER TO ELEVATION.

**

Rev Date Comments


B 19/12/19 Amended to include various height available.

For Approval to SR1Approved to Network Rail Class 1A

C 14/01/20 Notes amended to show pale / post variables.

ADDITIONAL HOLE REQUIREDFOR 3.0M HIGH 775MM FROMBOTTOM OF PALE.

ADDITIONAL SLOT REQUIREDFOR 3.0M HIGH 2175MM FROMTOP OF POST.



AutoCAD SHX Text

All rights reserved

AutoCAD SHX Text



SCALEDRAWN BY DATE

DRAWING TITLE


A

Rev Date Comments

COM/SR1/18/3/003

CHECKED BY

-

Combi™ 1.8-3.0m High Gradient Details

CAD A1

MacGregor

1800** FENC

E HEIG

HT M

AINTAIN

ED U

P SLOPE

2718 POST CENTRES REDUCED TO ACCOMODATE SLOPING PANEL

10°MAXIMUM GRADIENT

450M

MM

AXIM

UM

STE

P

1800

** (H

EIG

HT

OF

FEN

CE) 18

00**

(HEI

GH

T O

F FE

NC

E)

GRADIENT PANELSCALE 1:10

50

50

2750 STANDARD POST CENTRES

PALES EXTENDED ON ALL GRADIENT PANELS BY 30MMTO MAINTAIN FENCE HEIGHT OF 1800MM FROM FGL.

STANDARD LENGTH PALES USED FOR ALL OTHER HEIGHTS.

2750 STANDARD POST CENTRES

178

0 LE

NG

TH O

F PA

LE S

UPP

LIED

ON

SLO

PIN

G S

ECTI

ON

(180

0MM

ON

LY)

Rev Date Comments

A 19/12/19 Amended to include various height available.


IMPORTANT NOTE FOR 3.0M HIGH PRODUCTS:

WHEN A 3.0M HIGH FENCE / GATE IS TO BE UTILISED THENAN ADDITIONAL RAIL MUST BE FITTED. THIS ADDITIONAL

RAIL MUST BE FITTED 825MM FROM FGL. THE CENTRES OFTHE TOP TWO RAILS MUST NEVER EXCEED 1875MM.



AutoCAD SHX Text

All rights reserved

AutoCAD SHX Text



SCALEDRAWN BY DATE

DRAWING TITLE

28/10/2019 VARIES

B

CHECKED BY

-

CAD A1

STANDARD BOLT DOWN DETAILFOR INTERMEDIATE & END POSTS

SCALE 1:5

Rev Date Comments

GaryMacGregor

COM/SR1/18/3/008

Combi™ 1.8-3.0m High Boltdown Post Details

M12 ANCHOR FITTED INACCORDANCE WITHMANUFACTURERSINSTRUCTIONS. TOPSSPOILED TO PREVENTREMOVAL.

200

200

140

3030

30 140 30

124

12

124

12

100

Ø14Ø14

Ø14 Ø14 Ø14 Ø14

Ø14Ø14

200

3014030

30

200

140

30

55

5

M12 ANCHOR FITTED INACCORDANCE WITH

MANUFACTURERSINSTRUCTIONS. TOPSSPOILED TO PREVENT

REMOVAL.

RSJ'S FULLY WELDED TOBASEPLATE

SHS FULLY WELDED TOBASEPLATE

STANDARD BOLT DOWN DETAILFOR GATE POSTS

SCALE 1:5

GATE POSTS OFFSET (AS /OPP) TO ENSURE CLEARWALKWAY AND AVOID ANYTRIP POTENTIAL ONBASEPLATE / FIXINGS.

TO BE READ IN CONJUNCTION WITHDRAWINGS COM/SR1/18/3/001 - 007



A 19/12/19 Notes on foundation added.


B 16/03/20 End post note added.



AutoCAD SHX Text

All rights reserved

AutoCAD SHX Text


d com/sr1/18/3/001

Documents