D. Process Flow Chart

“The Brick Insulation: A Brick with Heat Insulation Properties Made

Up of Styrofoam Pieces, Paper Strips and Wood Shavings”

GATHERING THE MATERIALS AND EQUIPMENT

FILLING THE CONTAINER OF ABOUT ONE-THIRD FULL

WITH THE SOIL

ADDING ENOUGH WATER TO FILL THE CONTAINER

CRUSHING THE CLAY SOIL AS TINY AS POSSIBLE. REMOVING ALL THE CLUMPS

REMOVING FOREIGN PARTICLES IN THE MIXTURE

TRANSFERRING THE MIXTURE INTO ANOTHER CONTAINER

ALLOWING THE MATERIAL TO HYDRATE FOR TWO-THREE HOURS

POURING AND DISTRIBUTING THE FILTERED CLAY WATER IN EACH CLOTH

HANGING EACH CLOTH AND LETTING THE EXCESS WATER DRIP

LETTING THE FILTERED CLAY SOIL DRY FOR A DAY

DISTRIBUTING AND MIXING THE COMPONENTS OF WEIGHED AMOUNTS

WITH THE CLAY SOIL

LETTING THE SETUPS DRY FOR ANOTHER DAY

PUTTING THE THREE MIXTUREX IN EACH WOODEN MOLDER

LETTING THE BRICKS DRY IN A SHADED AREA FOR A DAY

LETTING THE BRICKS DRY UNDER THE DIRECT SUNLIGHT FOR THREE

DAYS

LETTING THE BRICK DRY UNDER THE DIRECT SUNLIGHT WITHOUT

THE MOLDER

THANK YOU FOR WATCHING!

presented by: BEATRIX CARMELA ESTRELLA