1

323011

LAN SYSTEM1 SYSTEM2WEP DCV OUT GAIN

Speed Full Link Aux System

323011

175 mm

90 m

m

LAN SYSTEM1 SYSTEM2WEP DCV OUT GAIN

Speed Full Link Aux System

323011

60 mm

1

LAN SYSTEM1 SYSTEM2WEP DCV OUT GAIN

Speed Full Link Aux System

323011

58 67 3

2

LAN SYSTEM1 SYSTEM2WEP DCV OUT GAIN

Speed Full Link Aux System

323011

13 12 11 10 9

4

D45 System

Description

D45/IP interface

D45 System interface to be used for D45 to BTicino 2 WIRE/IP system in order to realize mixed installations. Device must be configured with the special purpose configuration software D45/IP interface Config 2.0. DIN rail installation.

Technical data

Power supply: 30 VdcStand by absorption: ≤ 130 mA@30 VMax operating absorption: ≤ 230 mA@30 VOperating temperature: (-10)-(+40)°C

Dimensional data

Front view

Legend

1. Configurators housing

2. USB interface port for configuration download and firmware update

3. Auxiliary power supply input connector 30 Vdc

4. Serial RS 232 interface port

5. SYSTEM 2 RJ45 connector for D45 main entrance panel connection

6. SYSTEM 1 RJ45 connector for D45 system BUS connection (connect to system riser shunt)

7. Video gains setting DIP SWITCH

8. RJ45 Ethernet connection for 10/100 Mbit Ethernet LAN

9. Interface working status LED - LED ON = device is working

10. NOT USED pushbutton

11. LINK indication LED - LED ON = presence of Ethernet network

12. FULL indication LED - LED ON = full duplex - LED OFF = half duplex

13. SPEED indication LED - LED ON = 100 Mbit speed connection LED OFF = 10 Mbit speed connection

BT00459-b-EN 13/05/2013

2

323011

LAN SYSTEM1 SYSTEM2WEP DCV OUT GAIN

Speed Full Link Aux System

323011

323011323010

ON

SD

1

2

3

4

ON

SD

1

2

3

4

LAN SYSTEM1 SYSTEM2WEP DCV OUT GAIN

Speed Full Link Aux System

323011

323005

323003

323011

323010

323010

D45/IP interface

Configuration

SET THE HANDSETS OPTION OF D45/IP INTERFACE 1Riser Serial number Each Riser address range Lower address Higher address 323011address rangeRiser 1 0 - 79

0 239 0-239Riser 2 80 - 159Riser 3 160 - 239

Set the handsets option of D45/IP interface 2Riser serial number Each Riser address range Lower address Higher address 323011address rangeRiser 4 240-319

240 559 240-559Riser 5 320-399Riser 6 400-479Riser 7 480-559

Connect for USB download configuration.

Connect for serial port download configuration

Connect for the Ethernet download configuration

D45/IP interface has three ways for its download configuration, which are respectively online download, serial port download and USB download.

Other 323011 or 346890 (BT’s 2-wire system IP interface)

If the main EP is quite near to D45/IP interface, then a power supply can be omitted.

Interface device must be configured by using the specific software and PC connection:

Configuration example:If the first D45/IP interface 1 connects 3 Risers (Riser 1, Riser 2 and Riser 3), the second D45/IP interface 2 will connect 4 Risers (Riser 4, Riser 5, Riser 6 and Riser 7). Each Riser should be configured as per configuration MODE 1.

Wiring ways to install 323011

BaCkBOnE/maIn EP

BT00459-b-EN 13/05/2013