dacor model sgm464em parts manual

12
Door Subchassis Gas Tubing Storage Base Top Frame Cell/Case Manifold Bezel Membrane Updates RSD Range

Upload: higginsmichelle

Post on 18-Nov-2014

1.217 views

Category:

Documents


11 download

TRANSCRIPT

Page 1: Dacor Model SGM464EM Parts Manual

Door Subchassis

Gas Tubing Storage Base

Top Frame Cell/Case

Manifold Bezel Membrane

Updates

RSD Range

Page 2: Dacor Model SGM464EM Parts Manual

RSD - OVEN DOOR ASSEMBLY

Ref. # Part # Description75 OBSOLETE BRACKET, HEAT BARRIER

GLASS, (NO LONGER USED)76 27607 A/B/R FRAME, GLASS MOUNTING,

(Almond, Black or Arctic White)77 27607B FRAME, GLASS MOUNTING78 86360 GLASS/OVERLAY ASSEMBLY,

(Stainless Only)79 82124 GASKET, DOOR80 OBSOLETE GLASS, HEAT BARRIER,

(NO LONGER USED)81 12470 WINDOW PACK, (10X16, Double)* 82790BP "J"-TRIM WINDOW PACK,

(Black Porcelain)* 26429 THERMOCORD, WINDOW PACK82 82216 A/B/R OUTER GLASS, (Almond, Black

or Arctic), (Use assembly number 86360, for stainless)

Ref. # Part # Description83 NOT USED84 82122 A/B/R HANDLE, DOOR,

(Almond, Black or Arctic)85 83224 TAPE, DOUBLE SIDED, .30 THK86 82883 HINGE, DOOR* 82508 HINGE, DOOR (Stainless Front)87 OBSOLETE INSTRUCTION PLATE,

(NO LONGER USED)88 13167 INSULATION89 27459BP LINER, INNER90 86746 LINER, OUTER, (Black Porcelain) 91 26575B HEAT SHIELD, DOOR, (Black)92 OBSOLETE HEAT SHIELD, DOOR, (Black)93 26577 SHIELD, LEFT94 26576 SHIELD, RIGHT

DACOR Technical Service

P.O. Box 6530 Diamond Bar, CA 91765 800-793-0093 - Fax: 909-612-1702

Page 3: Dacor Model SGM464EM Parts Manual

Page 1 of 1 Issued By:

Technical ServiceDate Issued:

4-2004Distribution:Service/Parts

Supercedes:

Subject:Grates

Product Type:Gas Cooktops / Ranges

Model No: Bulletin No:04-04

On October 10, 2002 the grates were changed on the cooktops and ranges listed below. The grates were changed to increase cleanability. The newer grates have a smooth black finish.

The serial revision level changes are noted below. Effective immediately the old style grate, part number 82109BM, are no longer available. When replacing a grate, care must be taken to ensure that the grates all match. One grate cannot be replaced without replacing both or all three grates.

Please refer to the serial number revision levels when ordering replacement grates.

1440 Bridge Gate DriveDiamond Bar CA 91765

MODEL NUMBER OLD SERIAL REVISION NEW REVISIONSGM364 F G

SGM464EM F GSGM464GG F GSGM362EM (this model was obsolete prior to the grate change

but like replacements are no longer available.RSD30 E FPGR30 E FRSG30 (this model was obsolete prior to the grate change

but like replacements are no longer available.

GRATE SETS1 GRATE 2 GRATES 3 GRATES

Page 4: Dacor Model SGM464EM Parts Manual

Date: 4-30-04

Re: Preference Range Door Changes

RSE REVISION B AND OLDER REVISION C AND NEWERRSD30, PGR30 REVISION D AND OLDER REVISION E AND NEWERDescription Old Part # New Part #Door Gasket 72027 72020Hinge – Stainless Steel 82508 82508Hinge – Black/Arctic 82883 82883Window Pack W/J-Channel 12470 N/AWindow Pack N/A 72148Side Shield, Left 26576 36617Side Shield, Right 26577 36618Heat Shield, B/R 26574 36620BHeat Shield S 36354 36622BInsulation 80172 80213Inner Liner Assy 27459BP 27728BPBracket, Inner Liner 78920 38230Outer Liner 86746 27460BPDoor Bumpers N/A 83618

Inner Door AssemblyInner Door W/1” Window Pack 27” Black/Arctic 66620

27” Stainless 6662130” Black/Arctic 6662230” Stainless 66623

Page 5: Dacor Model SGM464EM Parts Manual

RSD - SUB CHASSIS ASSEMBLY

Ref. # Part # Description1 82986 COOLING FAN2 26044 SUBCHASSIS3 83566 TERMINAL BLOCK, 2-POLE4 27455 DUCT TRANSITION5 26034 HEAT SHIELD6 12400 FUSE BOX ASSEMBLY, (CSA)7 83111 FUSE, 15 AMP, (CSA)* 83110 FUSE, 15 AMP, (CSA)8 82506 CSA SINGLE SOCKET* 83112 FUSE, 30 AMP

Ref. # Part # Description9 82195 1/2 FLEX, 90 DEGREE CONNECTOR,(Elbow)10 27094 BACK COVER11 26084 EXHAUST COVER12 27043 DIVIDER13 26085 EXHAUST DUCT14 83059 CONNECTOR, 1/2 FLEX, STRAIGHT15 26420 CONDUIT, (UL)16 86672 LEAD WIRE KIT, (UL)17 86673 LEAD WIRE KIT, (CSA)

DACOR Technical Service

P.O. Box 6530 Diamond Bar, CA 91765 800-793-0093 - Fax: 909-612-1702

Page 6: Dacor Model SGM464EM Parts Manual

RSD - STORAGE / BASE ASSEMBLIES

Ref. # Part # Description1 83050 ADAPTER, 3/8 FPT TO 3/8 TUBE2 82348 GAS TUBE3 26134 RACEWAY, GAS TUBE4 82208 ADAPTER, 1/2MNPT TO 3/8 TUBE5 26130 BRKT, INLET FITTING ATTCH6 83068 SUPPORT, STORAGE PANEL

(Includes key numbers; 7, 8 & 9)7 83048 NUT, 8-32 KEEPS8 83194 WASHER, NYLON9 83220 SHOULDER SCREW10 ORDER 26851A\B\R OR

13059(Stainless)11 26851 A\B\R PANEL, STORAGE,

(Almond, Black, Arctic)

Ref. # Part # Description* 13059 PANEL, STORAGE, (Stainless)12 83044 HINGE13 83237 CATCH, MAGNETIC14 26135 LINER, STORAGE PANEL15 26052 BRKT, STORAGE COMP. MTG.16 83034 LEVELER, ADJUSTABLE, 5/16"* 83359 LEVELER, ADJUSTABLE, 1/2"17 27144 ASSY, BASE, RANGE ( Uses 1/2" Leveler)18 26041 BRACKET, ANTI-TIP19 27048 ASSY, STIFFENER, BASE20 27080 EXHAUST PLATE ASSEMBLY21 27068B ASSEMBLY, STORAGE COMPARTMENT

DACOR Technical Service

P.O. Box 6530 Diamond Bar, CA 91765 800-793-0093 - Fax: 909-612-1702

Page 7: Dacor Model SGM464EM Parts Manual

RSD - GAS TUBING / CONTROL ASSEMBLIES

Ref. # Part # Description1 86079 4 IGNITOR WIRES2 86526 SPARK MODULE, 4 POINT, (Attaches with Velcro)3 26118 SIDE SUPPORT ASSEMBLY, (Left)4 26027 SPARK BOX PLATE5 86081 JUMPER WIRES, LIGHTS & SWITCHES6 86080 IGNITOR HARNESS7 82035 BURNER TUBE/BASE, (Left Rear)8 82039 BURNER TUBE/BASE, (Front)9 82038 BURNER TUBE/BASE, (Right Rear)10 26068 BURNER SUPPORT CHANNEL11 27000 SIDE SUPPORT ASSEMBLY, (Right)12 82151 TERMINAL BLOCK13 27038 REAR PANEL ASSEMBLY14 83538 P.C.B. SUPPORT, NYLON15 82127 RELAY PCB, 105 C16 27066 ASSEMBLY, AIR BAFFLE17 83037 PUSH TIE18 83037 PUSH TIE19 83053 STANDOFF, 6/32 X .438LG, 1/4 HEX,

(Two used with 83054 screw and 83308 nut)20 26072 P.C.B. MOUNTING PLATE

82112 HARNESS, ERC TO RELAY P.C.B.

DACOR Technical Service

P.O. Box 6530 Diamond Bar, CA 91765 800-793-0093 - Fax: 909-612-1702

Page 8: Dacor Model SGM464EM Parts Manual

Date: 3-17-05 Re: Relay Board Products Covered: ECS127, 130, 136 – MCS127, 130 – PCS130 – ERD30SO6 – ERD60S06, ERD36, ERDE36, MRES30S, RSD30 Revision Level Change: Model# Old Rev New Rev ECS127B/R/SBK/ SBR/SCH/SCP, MCS127B/R/S H J ECS127B/R/SBK/SCH/SBR/SCP/208V, MCS127B/R/S/208V, ERD60S06 F G ECS130B/R/SBK/SBR/SCH/SCP, MCS130B/R/S, PCS130BRS J K ECS130B/R/SBK/SBR/SCH/SCP/208V, MCS130B/R/S/208V, PCS130B/R/S/208V G H ECS136SBK/SBR/SCH/SCP E F ERD30S06 U V ERDE36, MRES30S B C ERD36 N P RSD30 L M Condition: This replacement was implemented to improve reliability and to reduce warranty cost due to service issues relative to flickering lights. Relay boards ARE backwards compatible and can be used as service replacements. Correction: Description Old Part # New Part # Relay Board 82127 92028 This change IS backward compatible, new parts can be used on any unit.

Page 9: Dacor Model SGM464EM Parts Manual

RSD - OVEN CELL / CASE ASSEMBLY

Ref. # Part # Description1 26629 CASE TOP2 86166 DOOR LATCH MECHANISM3 26598 LATCH PLATE4 Not Replaceable ASSY, OVEN CELL 30"5 27454 ASSY, CASE SIDE, LEFT6 82650 SUPPORT RACK, BLK PORC.7 82230 OVEN RACK, 30"CONV. CELL8 82106 PLATED GRILL, BROILER PAN9 82107 PORCELAIN PAN10 82817 BROIL ELEMENT, 3000W, 240V11 82880 BAKE ELEMENT, 2200W, 240V12 82891 FILTER, CONVECTION13 26655BP CONVECTION BAFFLE, 30" OVEN,

(Black Porcelain)14 82377 CONVECTION ELEMENT, 2200W,

240V

Ref. # Part # Description15 82651 FAN BLADE, CONVECTION MOTOR16 82826 SMOKE ELIMINATOR17 86123 LIGHT ASSY WITH 40W BULB, (130 Volt)* 86852 LENS COVER18 26034 HEAT SHIELD, STORAGE, RSD19 82851 RECEPTACLE, HINGE, DOOR20 27453 ASSY, CASE SIDE, RIGHT21 86663 TEMPERATURE SENSOR22 27470 ASSY, CONV. MOTOR MOUNTING PLATE23 82647 CONVECTION MOTOR24 26447 CASE BACK25 26357 TERMINAL BLOCK COVER26 26560 COVER PLATE, LIGHT27 82987 THERMAL SWITCH, HI-TEMP CUTOUT28 82240 EXHAUST TUBE

DACOR Technical Service

P.O. Box 6530 Diamond Bar, CA 91765 800-793-0093 - Fax: 909-612-1702

**82089 Bulb

** Not Shown13425B, S, R 3" Sidepanel - RH13426B, S, R 3" Sidepanel - LH

Page 10: Dacor Model SGM464EM Parts Manual

RSD - MANIFOLD ASSEMBLY

Ref. # Part # Description1 83061 BUSHING, 5/8 DIA2 27095 ASSY, MANIFOLD ENCLOSURE (Please Note: Effective 6/25/96; a design change now uses the RSG enclosure

#27095), (pry-out plug #83387, is now needed to block the right hole, when replacing an original RSD enclosure.3 86373 "C"-AIR SHUTTER4 86088 "C"-VALVE W/JETS, (Left Rear/Natural Gas) Use Prior To Serial # FD7220084* 86089 "C"-VALVE W/JETS, (Left Rear/Liquid Propane) Use Prior To Serial # FD72200844 86305 "C"-VALVE W/JETS (Left Rear/Natural Gas) Use Starting Serial # FD7220084* 86307 "C"-VALVE W/JETS (Left Rear/Liquid Propane) Use Starting Serial # FD72200845 86420 MICROSWITCH6 86083 "B"-VALVE W/JETS, (Left Front/Natural Gas) Use Prior To Serial # FD7220084* 86082 "B"-VALVE W/JETS, (Left Front/Liquid Propane) Use Prior To Serial # FD72200846 86275 "B"-VALVE W/JETS, (Left Front/Natural Gas) Use Starting Serial # FD7220084* 86277 "B"-VALVE W/JETS, (Left Front/Liquid Propane) Use Starting Serial # FD72200847 86372 "B"-AIR SHUTTER8 82080 GAS VALVE, 90, 3/8 NPT9 82540 REGULATOR, 1/2 X 1/2 (Also Order Bushing Part # 62002 1/2 x 3/8, When Replacing Regulator)10 * MANIFOLD, GAS RANGE11 86087 "C"-VALVE W/JETS, (Right Front/Natural Gas) Use Prior To Serial # FD7220084* 86086 "C"-VALVE W/JETS, (Right Front/Liquid Propane) Use Prior To Serial # FD722008411 86298 "C"-VALVE W/JETS, (Right Front/Natural Gas) Use Starting Serial # FD7220084* 86302 "C"-VALVE W/JETS, (Right Front/Liquid Propane) Use Starting Serial # FD722008412 86085 "B"-VALVE W/JETS, (Right Rear/Natural Gas) Use Prior To Serial # FD7220084* 86084 "B"-VALVE W/JETS, (Right Rear/Liquid Propane) Use Prior To Serial # FD722008412 86280 "B"-VALVE W/JETS, (Right Rear/Natural Gas) Use Starting Serial # FD7220084* 86296 "B"-VALVE W/JETS, (Right Rear/Liquid Propane) Use Starting Serial # FD722008413 86372 "B"-AIR SHUTTER14 86373 "C"-AIR SHUTTER15 83058 GROMMET, EPDM RUBBER16 26097 BRKT, MTG., ENCLOSURE17 83067 SEAL, SHUT-OFF VALVE18 26098 ENCLOSURE TOP, MANIFOLD

62058 BRASS PLUG, MANIFOLD (Not Shown)

- COMPLETE MANIFOLD ASSEMBLY -Please Note: (Replace with Regional Service Manager approval only)

*62121 MANIFOLD ASSEMBLY, (Natural Gas)*62099 MANIFOLD ASSEMBLY, (Liquid Propane)

DACOR Technical Service

P.O. Box 6530 Diamond Bar, CA 91765 800-793-0093 - Fax: 909-612-1702

Page 11: Dacor Model SGM464EM Parts Manual

RSD - BEZEL-MEMBRANE-TRIM ASSEMBLIES

Ref. # Part # Description1 82063 A/B/R MEMBRANE (Touch Pad; Almond/Black/Arctic)*2 82232 A/B/R BEZEL (Almond/Black/Arctic)3 82016 A/B/R KNOB, RANGE (Almond/Black/Arctic)4 26143 A/B/R TRIM POST, LEFT5 26119B CONTROL BEZEL TRIM (Black Only)6 26638B INTAKE GRILL7 26069 A/B/R EXHAUST GRILL8 82873 NAMEPLATE, SELF CLEAN9 26139 A/B/R TRIM POST, RIGHT10 82233 INDICATOR LIGHT, BLUE NEON11 82036 A/B/R SPILL PROTECTOR (Almond/Black/Arctic)12 701002** OVEN CONTROL (E.R.C.)*PLEASE NOTE: Also order 4 indicator light assemblies, part # 82233

prior to serial numbers belowStarting serial numbers for almond and black models is: FA5290007Stainless is FA528001 and arctic white is number: FA5280032

DACOR Technical ServiceP.O. Box 6530 Diamond Bar, CA 91765 800-793-0093 - Fax: 909-612-1702

** Order As Kit, 701002(Click Note for Details)

mlaca
Note
701002-Oven Control Service Kit Contains: 62692-OVEN CONTROL, RSD (QTY.1) 82835-TEMPERATURE SENSOR (QTY.1) 83294-NUT, CERAMIC WIRE (QTY.2)
Page 12: Dacor Model SGM464EM Parts Manual

RSD - TOP FRAME ASSEMBLY

Ref. # Part # Description1 82109BM GRATE PACK EXTENDED, (Black Matte Porcelain)2 86474 GRATE SUPPORT PAD3 92362 IGNITOR ASSEMBLY4 26000 AP/BP/RP/SG TOP FRAME, (Almond, Black, Arctic White, or Stainless)5 86802 O-RING, "B"-BURNER HEAD* 86801 O-RING, "C"-BURNER HEAD6 62951 "B"-BURNER HEAD ASSEMBLY, W/IGNITOR7 86405 BRASS NUT; "B" & "C"- BURNER HEAD8 86408* "B"-BURNER RING9 86524BM "B"-BURNER CAP, (Medium)10 86523BM "C"-BURNER CAP, (Large)11 86407* "C"-BURNER RING12 62952 "C"-BURNER HEAD ASSEMBLY, W/IGNITOR

DACOR Technical Service

P.O. Box 6530 Diamond Bar, CA 91765 800-793-0093 - Fax: 909-612-1702

Note: Burner Rings part number 82953 (set of 4) should be used when replacing all 4 igniters orburner assemblies. Units with a serial number revision N or higher will have the individual part number (old) style of rings.