d’cunha industriemaschinen gmbh2006/05/01 · d’cunha industriemaschinen gmbh neues roland 1 d-...

1

D’Cunha Industriemaschinen GmbH

Neues Roland 1 • D-29223 Celle • Germany Tel. (++49) 0 51 41 - 93 77 - 0 • Fax (++49) 0 51 41 - 38 21 08

E-Mail: [email protected] • Internet: www.dcunha-cnc.com

MACHINERY SALES LIST We are pleased to present our latest sales list. The machines described are, either in our warehouse or ex-Site factory. Either way, you may view them under power in all functions. Important for you is the fact that we always check the machines thoroughly before we purchase them and can therefore give you an accurate description of their condition. Our machine inspections are among the most stringent in the business. We also include machines that our customers have asked us to market on their behalf knowing that we will carry out the marketing thoroughly, discreetly and professionally. Over the years, we have told you about our world-wide network of contacts who can help us to source the machines you require, especially that “NO ONE CAN FIND IT MACHINE” which we may not have at the time you require it. This statement we repeat - TRY US ! Whether you are buying or selling machines, we would appreciate a chance to try and work with you. Keep us in mind. We endeavour! See you soon at:


Neues Roland 1 D- 29223 Celle

Germany

Telephone No.: Country Code +49 (0) 5141 - 93770 Facsimile No.: Country Code +49 (0) 5141 – 937770

www.dcunha-cnc.com

[email protected]

2




Within the categories the machines are sorted alphabetically

Lathes CNC................................................................................................................................ 3 Vertical Lathes CNC .................................................................................................................. 8 Vertical Boring Mills CNC ........................................................................................................ 9 Vertical Boring Mills ............................................................................................................... 11 Horizontal Machining Centres CNC........................................................................................ 11 Vertical Machining Centres CNC ............................................................................................ 14 Milling Machines CNC ............................................................................................................ 17 Portal Milling Machines CNC.................................................................................................. 18 Boring Mills CNC .................................................................................................................... 19 Table and Floor Type Borer ..................................................................................................... 21 Radial Drilling Machines ......................................................................................................... 21 CNC Deep Hole Boring Machines........................................................................................... 22 Grinding Machines CNC.......................................................................................................... 22 Roll Grinding Machines ........................................................................................................... 23 Plate Bending Machines CNC.................................................................................................. 23 Robots CNC ............................................................................................................................. 25 EDM Die Sinking Machines CNC........................................................................................... 25 Shaping/Slotting Machines ...................................................................................................... 25 Tables ....................................................................................................................................... 26 Steel Production ....................................................................................................................... 26

3




Lathes CNC

CNC Slant Bed Lathe for Heavy Duty Cutting of Medium-Large Workpieces HEID S500 BL3

1990; Siemens 850T control; Swing over bed/slides 800/550 mm; Turning diameter max. 690 mm; Centre distance 3000 mm; Chuck diameter 500 mm; 12 station VDI 50 turret; Power packed 37/53 kW main drive; Spindle speeds to 2800 rpm; Steady rest; Tailstock; Chip conveyor;

Proposal Number: L-1712

CNC Turning Centre HITACHI SEIKI HiCELL 23

1990; Seicos LIII control; Swing diameter over bed 400 mm; Max. turning diameter 255 mm; Max. turning length 500 mm; Spindle drive motor 11 kW; Spindle speeds 20 – 3600 rpm; C-axis 0,001°; Y-Axis 100 mm for off centre machining; Chuck diameter 255 mm; 10-station tool turret with 5 driven positions; 3.7 kW tool drive; 12-station tool magazine; Tailstock; Chip conveyor; Tool measurement;


CNC Turning Centre with Y Axis (Chucker) IKEGAI TCR25Y

2001/Demonstration machine; Fanuc 18T control; Swing over bed 500 mm; Max. turning diameter 230 mm; Max. turning length 334 mm; Y axis stroke +/- 55 mm; C axis 0.001°; Spindle drive 22 kW; Spindle speeds 3150 rpm; Bar capacity 65 mm; 12 station turret with live tooling; Chuck 200 mm; NEW at USED MACHINE PRICES !


4




CNC Flat Bed Lathe KREWEMA HFDM40 360x1500

1991; Siemens Sinumerik 810T Control; Swing diameter over bed 720 mm; Swing over the cross slides 438 mm; Swing in the gap 1.500 mm; Turning length 1.500 mm; Main spindle motor 24 kW; Spindle speeds 15 – 2000 rpm; 6-station turret; Max. workpiece weight between centres/in the chuck 4000/800 kg; 3 jaw manual chucks 400/310 mm; 4-jaw manual faceplate 800 mm; Tailstock; Displaceable bed !


CNC High Precision Lathe

KUMMER K90 CNC 1993; Siemens 810T control; Max. turning diameter 180 mm; Max. turning length 100 mm; Spindle drive motor 6.1 kW AC; Spindle speeds to 6300 rpm; Spindle bar capacity 65 mm; Clamping table for up to 8 linear (gang-type) tools; Hydrostatic slides; Hydrostatic spindle; Linear scales; SUB MICRON ACCURACIES ! Automatic loading system;


CNC High Precision Lathe

KUMMER K90 CNC 1993; Siemens 810T control; Max. turning diameter 180 mm; Max. turning length 100 mm; Spindle drive motor 6.1 kW AC; Spindle speeds to 6300 rpm; Spindle bar capacity 65 mm; Clamping table for up to 8 linear (gang-type) tools; Hydrostatic slides; Hydrostatic spindle; Linear scales; SUB MICRON ACCURACIES ! Automatic loading system;


CNC Facing Lathe

for Preparation of Welding of Cylinders, Vessels, Pipes, Tubes etc. KUSAKABE

1998; Fanuc 18TC control; Max. turning Ø 2500 mm; Spindle speeds 2 – 63 rpm, drive motor 45/37 kW, faceplate Ø 2000 mm; Workpiece Ø 700 – 2500 mm;


5




CNC Lathe MAZAK Quick Turn 35

1987; Mazatrol CAM T2 control; Swing diameter over the bed 510 mm; Max. turning diameter 400 mm; Max. turning length 1500 mm; Travels X 280 mm, Z 1537 mm; Spindle bore 80 mm; Spindle speeds 6 - 3000 rpm; Chuck diameter 300 mm; 12 station turret; Programmable tailstock; Chip conveyor;


CNC Twin Spindle Turning Centre with Gantry Loading System

MAZAK MULTIPLEX 620II 1995; Mazatrol T-Plus control; Swing diameter over bed/support 390 mm; Spindle drive motor left/right 18.5 kW; Spindle speeds left/right 35-4000 rpm; Spindle bore left/right 61 mm; Chuck sizes left/right 210 mm; C-axis left/right 0.001°; Twin turret with 2x 12 Stations & 2x 12 possible live tool positions; Tool drive motor 3.7 kW; Tool speeds to 3000 rpm; Mazak gantry type parts loader GL100 complete with parts conveyor; Chip conveyor; Excellent system for unmanned complete production of turned/milled parts !


CNC Multi Axis Turn-/Mill Centre

MAZAK INTEGREX e410H 3000 2004; Mazatrol PC Pusion 640MT Pro control; Swing over bed / cross slides /turn diameter 610 mm; Turning length 3000 mm; C-Axis 0.001°; Y-Axis 410 mm for off centre milling; B-Axis tool tilting 240°; 375 mm chuck; Spindle motor rating 26 kW; Spindle speeds up to 4000 rpm; Single station tool carrier for turning & milling tools. Tool taper CAPTO C6; Milling spindle drive 22 kW; Milling speeds to 12000 rpm; Internal coolant; 80 station tool magazine; Steady rest 50-315 mm; Tailstock; Chip conveyor;


CNC Twin Spindle Lathe with Live Tooling

MIYANO BND-51S 2001; Fanuc 1iTB control; Main Spindle: Bar capacity 51 mm; 11 kW; 150-4000 rpm; C-Axis 0.001°; Back spindle: Bar capacity 42 mm; 5.5 kW; 150-4000 rpm; C-Axis 0.001°; Spindle synchroniation; 12 station turret with live tooling; 3000 mm bar capacity; Parts catcher; Parts conveyor; Chip conveyor;


6




CNC Lathe with Live Tooling MONFORTS MNC 600-2

1986; Siemens 3T CNC control; Swing over bed / cross slides 320/160 mm; Turning length 600 mm; Spindle motor rating 30 kW; Spindle speeds up to 4000 rpm; Bar capacity 65 mm; C-Axis 0.001°; 12 station turret with 12 live tool positions; Chip conveyor; Tailstock; Prepared for bar magazine; Collet chuck;


CNC Turning Centre (Chucker) MORI SEIKI CL-203BM

1999; MSG 803 control; Swing over bed 512 mm; Max. turning diameter 270 mm; Max. turning length 290 mm; C axis 0.001°; Spindle drive 11 kW; Spindle speeds to 3500 rpm; Bar capacity 65 mm; 12 station turret with 6 live tool positions; Tool drive 4.6 kW; Chip conveyor;


CNC Oil Country Lathe

MORI SEIKI SL-6B

1987; Fanuc 10TF control; Swing diameter over bed/support 700/560 mm; Max. turning length 860 mm; Spindle bore 160 mm; 400 mm double-end chuck; Spindle drive motor 30/37 kW; Spindle speeds 10 – 1010 rpm; 12-station tool turret; Tailstock; Chip conveyor;


CNC 4-Axis Lathe

MORI SEIKI ZL-45A/1500

1992; Fanuc MFD6 / 16T control; Swing diameter over bed/support 670/460 mm; Max. turning diameter 490 mm; Max. turning length 1530 mm; Spindle drive motor 45/37 kW; Spindle speeds 5 – 2500 rpm; Spindle torque 3915 Nm; 12-station top turret; 10-station lower turret; Tailstock; Chip conveyor; Promot portal loader with Siemens control;


7




CNC 4-Axis Lathe OKUMA LR25-2ST Big Bore

1989; OSP 5000L-G control; Swing diameter over bed 520 mm; Max. turning diameter 340 mm; Max. turning length 250 mm; Spindle bore 110 mm; Spindle drive motor 30 kW; Spindle speeds up to 2800 rpm; 12-station & 10-station tool turrets; Parts catcher; Tool eye; FMB bar magazine; Chip conveyor;


CNC Lathe with Live Tooling OKUMA LR25-M 1SC

1990; OSP 5020L-G control; Swing diameter over bed 520 mm; Max. turning diameter 340 mm; Max. turning length 1.700 mm; Spindle drive motor 30 kW; Spindle speeds up to 3.500 rpm; 12-station turret with live tooling. Tool drive 3.7 kW. Steady rest; Chip conveyor;


CNC 3-Axis Lathe with live tooling

SPINNER TC 32-MC 1998; Siemens Sinumerik 810D control; Swing diameter over bed 290 mm; Swing diameter over support 180 mm; Max. turning length 240 mm; Spindle drive motor 5.5 kW AC; Spindle speeds up to 6000 rpm; C-Axis 0.001°; 12-station turret with 6 live tools; Collet chuck; Tool measurement unit; Hydraulic tailstock; Programmable quill;


CNC Lathe

TRAUB TND 300 1990; Traub TX8F control; Swing diameter over bed 400 mm; Max. turning diameter 170 mm; Max. turning length 550 mm; Spindle drive motor 18.5 kW AC; Spindle speeds 56 – 5.600 rpm; Spindle bar capacity 65 mm (semi-draw tube); Chuck diameter 175 mm; 12-station turret; Tailstock; BEAUTIFUL – ONLY CUT PLASTIC !


8




CNC Multi Axis Turn-/Mill Centre

VOEST ALPINE (WFL) WNC 500S 1991; Siemens 880T control; Swing over bed /turn diameter 540/450 mm; Turning length 1200 mm; C-Axis 0.001°; Y-Axis 300 mm for off centre milling; B-Axis tool tilting 180°; 250 mm chuck; Spindle motor rating 37.5 kW; Spindle speeds up to 4000 rpm; Top slide fitted with Single station tool carrier for turning & milling tools. Tool taper ISO 40; Milling spindle drive 15 kW; Milling speeds to 3000 rpm; 24 station tool magazine; Lower slide with 12 station tool turret VDI40; Steady rest 15-80 mm; Programmable tailstock; Chip conveyor;


CNC Flat Bed Lathe

WOHLENBERG H1250SN 1978; Siemens Sinumerik 520K Control; Swing diameter over bed 1.250 mm; Swing over the cross slides 860 mm; Turning length 5.000 mm; Main spindle motor 50 kW; Steady rests; Tailstock;


Vertical Lathes CNC

CNC - Vertical Lathe EMAG VSC 400

1995; Siemens 805 CNC control; Chuck diameter 315; Turning diameter to 340 mm; Turning height to 315 mm; Spindle drive motor 28 kW; Spindle speeds to 4500 rpm; 6-station tool turret; Coolant through the spindle; Portal loader for parts loading & offloading;


CNC Vertical Twin Spindle Lathe

HESSAPP DV62-2 1981; Kongsberg CNC control; 2 Spindles; 2 tool supports; Swing diameter 850 mm; Turn diameter 800 mm; Turning height 500 mm; Spindle speeds 1120 rpm; Spindle drive 54 kW; 2 x 4-station turrets VDI 60; Very powerful/rigid machine !!


9




CNC - Vertical Lathe INDEX V300 RATIOLINE

1996; Index C200-4 CNC control; Chuck diameter 315; Spindle drive 57 kW; Spindle speeds to 4200 rpm; C-Axis 0.001°; 10-station tool turret with live tools; Live tool drive 9.5 kW; Parts conveyor PUS 10 for parts to 420 mm diameter. Chip conveyor;


CNC Vertical Twin Spindle Lathe

PITTLER PV 315/2-2 1990; Siemens 850T CNC control; 2 Spindles; 2 tool supports; Swing diameter 500 mm; Turn diameter 400 mm; Vertical travel 450 mm; 2x 42 kW spindle drive motors; Spindle speeds 28 – 2500 rpm; 2 x 4-station turrets; Automatic loading & turn-around for complete part machining; Tool monitoring; Chip conveyor;


Vertical Boring Mills CNC

CNC Vertical Borer with Twin Rams, Pallet Changer & Milling Spindle CARNAGHI AC20TM/1800

2003; Siemens 840D control; Pallet changer with 2 pallets; Pallet diameter 1800 mm; Turning diameter max. 2000 mm; Turning height max. 1300 mm; Table drive motor 60 kW; Table speed range 1 - 320 rpm; C-Axis 0.001°; Milling spindle drive motor 37.5 kW; Milling spindle speed to 3000 rpm; Twin crossrail mounted rams; 24-station tool magazine for turning with left ram; 40-station tool magazine fror milling with right ram; Vertical traversing crossrail; Chip conveyor; AS NEW !!

Proposal Number: V(K)-3287

CNC Vertical Borer with Milling Spindle and Tool Changer

DÖRRIES CONTUMAT 2 1990; Siemens 8T control; Table size 2000 mm; Swing diameter 2400 mm, load 17000 kg; Height under the crossrail max. 1500 mm; Crossrail vertically adjustable; Table drive motor 75 kW; Table speeds 2 - 224 rpm; C-Axis 0.001°; 12 station tool changer; Milling spindle drive 13.5 kW; Milling spindle speeds 14 – 1000 rpm; Full guarding; Chip conveyor;


10




CNC Vertical Borer with Tool Changer

HANKOOK VTB 125 1998; Fanuc 18T control; Table size 1250 mm; Swing diameter 1600 mm, load 8000 kg; Turning height max. 900 mm; Table drive motor 37 kW; Table speeds 0.9-360 rpm; 12 station tool changer; Full guarding; Chip conveyor;


CNC Vertical Borer with Pallet Changer & Milling Spindle

SCHIESS 16 DS 125 F 1986; Control Techniques control; Pallet changer with 2 pallets; Pallet diameter 1250 mm; Turning diameter max. 1600 mm; Pallet to ram max. 1400 mm; Table drive motor 56 kW; Table speed range 4 - 400 rpm; C-Axis 0.001°; Milling spindle drive motor 14 kW; Milling spindle speed range 16 – 1600 rpm; 5 Station attachment changer with angle head; 40 Station tool magazine for turning & milling tools; Delivery as is OR with complete retrofit possible;


CNC Vertical Borer with Pallet Changer & Milling Spindle TOSHIBA TMF-10

2000; Fanuc 18i-TA control; Pallet changer with 2 pallets; Pallet diameter 1016 mm; Turning diameter max. 1060 mm; Turning height max. 730 mm; Table drive motor 26/22 kW; Table speed range 2 - 500 rpm; C-Axis 0.001°; Spindle drive motor 11/7.5 kW; Spindle speed range 25 – 2500 rpm; 24-station tool magazine; Chip conveyor; Coolant through tool;


CNC Vertical Borer with Milling Spindle and Pallet Pool TOSHIBA TMC 16A

1983/1996; Tosnuc 500 control; 4 pallets: Ø 1600 mm, load 14000 kg; Turning Ø max. 1800 mm; Turning height max. 1650 mm; Table drive motor 45 kW; Table speeds 3.2 - 160 rpm; C-Axis 0.001°; Live tool drive motor 7.5 kW; Live tool speed range 20 – 1000 rpm; 24-station tool magazine with 16 live positions;


11




CNC Vertical Borer with Pallet Changer

TOSHIBA TSN-16/32A 1971/1996; Tosnuc 600L control; 2 pallets: Ø 1600 mm, load 12500 kg; Turning Ø max. 3200 mm; Turning height max. 950 mm; Table drive motor 65 kW; Table speeds 2.5 - 100 rpm;


Vertical Boring Mills

Twin Column Vertical Borer CRAVEN

1965; Faceplate Ø 4800 mm; Max. turning Ø 5000 mm; Max. turning height 3500 mm; Max. workpiece weight 30000 kg; Twin rams;


Twin Column Vertical Borer Niles

1955; Faceplate Ø 7600 mm; Max. turning Ø 9270 mm; Max. turning height 5625 mm; Max. workpiece weight 100000 kg; Twin rams; 1 Turning ram and 1 Milling ram. Ram vertical stroke 3000 mm; Ram swivel +/- 45°;


Horizontal Machining Centres CNC

CNC Horizontal Machining Centre with Pallet Changer HELLER BEA 07

1985; uni Pro NC 80-C control; 2 pallets 400 x 500 mm; Pallet loading capacity 300 kg; Table indexing 1°; Travels X 630, Y 500, Z 560 mm; Spindle drive motor 15 kW; Spindle speeds 45 - 6000 rpm; Tool taper ISO 40; 40-station tool magazine;

Proposal Number: MH-4031

12




CNC LARGE Horizontal Machining Centre for Flexible Machining INNSE ZENITH 1-10

1995; Siemens 880M control; 3 pallets 1.400 x 1.600 mm; Pallet load 10000 kg ; NC-Table B-Axis 0.001°; Traverses X 4000 mm, Y 2000 mm, Z 2500 mm; HEAD MAGAZINE/AUTO HEAD CHANGER FOR 6 MACHINING HEADS : Facing head D’Andrea UTS-400S, 400 mm diameter, U-Axis 125 mm, 400 rpm; 2x boring heads, 110/130 mm diameters, 37 kW, 3200/6000 rpm, Z-Axis 500 mm; Twist angular head, 360 x 1° / +/- 180°, 10 kW, 2000 rpm; 300-station tool magazine; Coolant through the spindle; Chip conveyor;


CNC Horizontal Machining Centre with Pallet Changer

MAKINO MC108-A150 1990; Fanuc 15MA control; 2 pallets 800 x 800 mm; Traverses X 1250 mm, Y 1000 mm, Z 810 mm; 4th axis 0.001° NC-table; Spindle speeds 10 - 3900 rpm; Spindle motor rating 26 kW; Tool taper BT 50; 150-station tool magazine; Direct tapping; Coolant through the spindle, etc..



MAKINO MC108-A150 1990; Fanuc 15MA control; 2 pallets 800 x 800 mm; Traverses X 1250 mm, Y 1000 mm, Z 810 mm; Table indexing 1°; Spindle speeds 10 - 3900 rpm; Spindle motor rating 26 kW; Tool taper BT 50; 150-station tool magazine; Direct tapping; Coolant through the spindle, etc..


CNC Horizontal Machining Centre with Pallet High Stacker

MATSUURA FXH-70 1997; Yasnac M80 control; 12-station high stacking unit for pallet size 500 x 500 mm; 4th axis 0.001° NC table; Travels X 750 mm, Y 600 mm, Z 625 mm; Spindle drive motor 6/18.8 kW; Speed range 200 – 27000 rpm; 120-station tool magazine; Chip conveyor; High pressure coolant through spindle; Tool breakage control; Tool measurement; Tool life control; Linear scales;


13




CNC Horizontal Machining Centre with Pallet High Stacker

MATSUURA FXH-70G 2000; Yasnac J300 control; 12-station high stacking unit for pallet size 500 x 500 mm; 4th axis 0.001° NC table; Travels X 750 mm, Y 600 mm, Z 625 mm; Spindle drive motor 6/18.8 kW; Speed range 200 – 27000 rpm; 120-station tool magazine; Chip conveyor; High pressure coolant through spindle; Tool breakage control; Tool measurement; Tool life control; Linear scales;



MITSUI SEIKI HS3A 1989; Fanuc 11MA control; 2 pallets 400 x 400 mm; Traverses X 550 mm, Y 400 mm, Z 500 mm; 4th axis 0.001° NC-table; Spindle speeds 60 - 6000 rpm; Spindle motor rating 7,5/5,5 kW; Tool taper MAS BT40; 60-station tool magazine; Linear scales;


CNC Horizontal Machining Centre with Linear Pallet System

NIIGATA HN 130B 1991; Fanuc 15M; 10 pallets 1320 x 1320 mm; Pallet load 4000 kg; Travels X 2000 mm, Y 1616 mm, Z 1350 mm, W 400 mm; Table indexing 1°; Spindle speeds 20 – 2500 rpm; Spindle drive motor 26 kW; Tool taper MAS BT 50; 180-station tool magazine; Loaded with options !


CNC Horizontal Machining Centre with Pallet Pool

TOSHIBA BMC800 1995; Tosnuc 888 control; 6 pallets 800 x 800 mm; Pallet load 2000 kg; Travels X 1600 mm, Y 1250 mm, Z 1200 mm; Table indexing 1°; Spindle speeds 15 – 5000 rpm; Spindle drive motor 18.5/22 kW; Tool taper MAS BT 50; 90-station tool magazine; Coolant through spindle; Renishaw probe; Chip conveyor; Direct tapping;


14





YASDA YBM 80N-63 1985 ; Fanuc 9M control; 2 pallets 630 x 630 mm; Traverses X 900 mm, Y 800 mm, Z 750 mm; Table indexing 1°; Spindle speeds 30 - 3000 rpm; Spindle motor rating 15 kW; Tool taper MAS BT50; 180-station tool magazine; SUPER ACCURACIES !


CNC Horizontal Machining Centre with Pallet Pool YASDA YBM 900N

1991 ; Fanuc 15M control; 5 pallets 800 x 800 mm; Pallet load 2500 kg ; Traverses X 1200 mm, Y 1.000 mm, Z 1.100 mm; Spindle taper ISO50; Spindle drive 22 kW; Spindle speeds 20 - 6000 rpm; 300-station tool magazine; Coolant through the spindle; Chip conveyor; VERY HIGH ACCURACIES !


Vertical Machining Centres CNC

CNC Drilling & Tapping Centre

BROTHER TC 225 1989; CNC 400 control; Table size 600 x 300 mm; Table load 150 kg; Traverses X 420 mm, Y 300 mm, Z 250 ; Spindle taper BT 30; Spindle motor 4.1 kW; Spindle speeds 6 – 6000 rpm; 10 station tool magazine; Good Condition;

Proposal Number: MV-4217

CNC Vertical Pendulum / Long Bed Machining Centre

CHIRON FZ-22L 1989; Siemens 810M control; 400 mm NC table; Travels: X 2200 mm (for pendulum operations 2 x 900 mm), Y 520 mm, Z 425 mm; Spindle taper ISO 40; Spindle drive motor 27 kW AC; Spindle speeds 20 – 6000 rpm; 40-station tool magazine; Chip conveyor; Coolant through tool;


15




CNC Vertical 4-Aaxis Machining Centre

HECKERT Fkrs 630/04 1989; Numerik 600 control; Table size 2000 x 630 mm; Table load 2000 kg; Spindle ~ Table 100-685 mm; Traverses X 1620 mm, Y 525 mm, Z 585 ; Spindle motor rating 18.5 kW; Spindle speeds 28 - 1400 rpm; 6-station turret with 36 station tool magazine; Very stable roughing machine complete with a 4th axis rotary table;


CNC Vertical 3-Axis Machining Centre

HITACHI SEIKI VA 65 II 1986; Fanuc 11M control; Table size 1800 x 630 mm; Table load 1500 kg; Spindle ~ Table 200-850 mm; Traverses X 1250 mm, Y 650 mm, Z 650 ; Spindle taper JIS BT 50; Spindle motor rating 18.5 kW; Spindle speeds 28 - 4000 rpm; 20 station tool magazine; Good Condition;


Double Column 5-face Machining Centre with Pallet Changer

KOLB CUBIMAT C 1500 1989; Siemens 850ME control; 2 pallets 1500 x 2000 mm; Pallet load 8000 kg; Traverses X 3000 mm, Y 2500 mm, Z 750 mm, W 1500 mm (positioning); Spindle taper ISO 50; Spindle drive motor 30 kW; Spindle speeds 4000 rpm; Distance between columns 2000 mm; Spindle ~ Table 1500 mm; 72 station tool changer; Head magazine with auto head changer; Angle head with auto indexing 2.5°; 5-face machining; HIGH TECHNOLOGY MACHINING SYSTEM !!


CNC Vertical Machining Centre with Pallet Changer

MORI SEIKI SV 500B/50 1999; MSC-501 control; Twin pallets 1.320 x 600 mm; Travels X 1.020 x Y 510 x Z 510 mm; Rapids 32 m/min; Spindle taper BT 50; Spindle drive motor rating 22 KW; Spindle speeds to 10.000 rpm; Tool magazine positions 40;


16




CNC HIGH ACCURACY JIG Centre

SIP 5000 CNC 1998; Fanuc 15MB control; Table size 900 x 700 mm; Table load 1000 kg; Traverses X 700 mm, Y 500 mm, Z 635 ; Spindle taper HSK E50; Spindle motor rating 11 kW; Spindle speeds 30000 rpm (Fisher Spindle); 50 station tool magazine; Excellent condition; High speed machining of moulds ! Sub micron accuracies;


2off CNC 5-Axis Machining Centre with Pallet Changer

STAMA MC 326/S 2001; Fanuc 18iM control; Twin pallets 700 x 350 mm; 2x NC Trunnion Rotary Tilting tables; Travels 520 x 300 x 360 mm; Rapids 60 m/min; Spindle taper ISO 40; Spindle drive motor rating 18.5 kW; Spindle speeds 36 – 10500 rpm; Tool magazine positions 42; Coolant through the spindle 70 bar;

Proposal Number: MV-4157 & MV-4158

CNC Vertical Long Bed Machining Centre with Large NC-Table STAMA MC550S

1998; Siemens Sinumerik 840C control; Fixed table size 1580 x 1000 mm; Table load 2000 kg; NC-Rotary table Fibro 2000 mm diameter, 1500 kg loading capacity; Travels X 3000 mm, Y 1000 mm, Z 700 mm; Spindle taper ISO 50; Spindle drive motor rating 26 kW; Spindle speeds 36 – 4500 rpm; Tool magazine positions 45; Chip conveyor; Paper filter for the coolant;


Double Column Machining Centre OKUMA MCR-B-HS 25-F-S

1991; OSP 5020M control; Table size 2000 x 4100 mm; Table load 22000 kg; Distance between the columns 2550 mm; Traverses X 4020 mm, Y 2730 mm, Z 700 mm; Max distance between spindle and table 1300 mm; Spindle taper DIN 69871A50; Spindle drive motor 15 kW; Spindle speeds to 10000 rpm; 32 station tool changer; Linear scales;


17




Milling Machines CNC

Bed Milling Machine CNC BUTLER-ELGAMILL HC 5000

1987; Heidenhain TNC 407 & Fidia CNC 11 copy mill controls; Table size 6000 x 1030 mm; Column longitudinal travel X 6000 mm; Spindle vertical travel Y 1660 mm; Ram cross travel Z 1050 mm; Spindle taper ISO 50; Spindle motor rating 22 kW; Spindle speeds 20 - 2000 rpm; Manual angle head; Heidenhain scales; Coolant unit;

Proposal Number: V(F)-1667

Lateral Milling Machine CNC

BUTLER-ELGAMILL LE20 1992; Siemens 850M control; Floor plates 3x 5000x2420 mm; Rotary infeeding table, table size 3000 x 2000 mm, table load 20 tonnes, V-Weg 1500 mm; Column longitudinal travel X 20000 mm; Spindle vertical travel Y 2800 mm; Ram cross travel Z 1050 mm; Spindle taper ISO 50; Spindle motor rating 30 kW; Spindle speeds 30 - 3000 rpm; 5 position automatic indexing head; 60 station automatic tool changer; Chip conveyor;


Lateral Milling Machine CNC

BUTLER-ELGAMILL LNC Approx 1982; Accramatic control; Floor plates; Column longitudinal travel X 11000 mm; Spindle vertical travel Y 2500 mm; Ram cross travel Z 970 mm; Spindle taper ISO 50; Spindle motor rating 18 kW; Spindle speeds 15 - 1600 rpm; Universal milling head;


CNC Lateral Milling Machine COLGAR FRAL 50

1990; Siemens Sinumerik 840C control; 2 CNC hydrostatic rotary infeeding tables TRT1200; Table size 1600 x 2000 mm; Table load 12000 kg; Travels X 9000 mm, Y 3000 mm, Z 1000 mm, W (Table travel) 1500 mm, B-Axis 0.001°; Spindle drive motor 41 kW; Spindle speeds 1620 rpm; 60-station tool magazine; Spindle MAPA 500E, 225 mm diameter, 500 mm length; Milling head TABR 200, indexing 1° in 2 axes; Spindle MAV, 180 mm diameter, 440 mm length, 1500 – 3000 rpm; Head magazine for 3 heads; Automatic head changer; MULTI AXIS MACHINING SYSTEM !


18




5-Axis Milling Centre CNC FERRARI, C.B. A16

1993; E160 CNC control; Dividing head as work piece holder, fully controlled in 2 axes ; C Axis 360° rotation & A Axis tilting; Work piece holder with ISO 50 taper; Column longitudinal travel X 1050 mm; Spindle vertical travel Y 420 mm; Ram cross travel Z 420 mm; Spindle taper ISO 40; Spindle power 10 kW; Spindle speeds 10 - 4000 rpm; 16 station pick-up tool / + Workpiece magazine; ALMOST UNUSED !!!


Portal Milling Machines CNC

CNC Gantry Milling Machine TOSHIBA MPG 40200

1990; Tosnuc 600MB control; Table size 20000 x 3000 mm; Travels : Gantry travel X 20000 mm, Y 4500 mm, Z 800 mm, W 1300 mm(crossrail vertical travel); Distance between the columns 4000 mm; Spindle speed range 5 - 2000 rpm; Spindle taper MAS BT50; 5-face machining head with horizontal and vertical spindles, Planing head, Automatic head indexing, 3-station head stocker and automatic head changer; 120-station automatic tool changer;


CNC Portal Milling Machine 5-Axis

ZAYER KP 5000 1996; Fidia M30 control; Table size 5000 x 1200 mm; Table load 10000 kg; Travels X 4710 mm, Y 2576 mm, Z 1102 mm; Spindle drive 37 kW; Spindle speed range 35 - 6000 rpm; Spindle taper ISO50; Distance between the columns 1800 mm; 2 Axis CNC milling head


19




Boring Mills CNC

CNC Table Type Boring & Milling Machine with Tool Changer CERUTI AL-T 125

1989; ECS control; Boring spindle diameter 125 mm; Table size 1100 x 1300 mm; Table load 4000 kg; Travels X 1600 mm, Y 1500 mm, Z 1500 mm, W 750 mm; Spindle drive 22 kW; Spindle speed range 6 - 2000 rpm; Tool magazine positions 40; D’Andrea facing head;

Proposal Number: V(B)-3196

CNC Table Type Boring & Milling Machine with Tool Changer

CERUTI AL-T 150 1987; ECS control; Boring spindle diameter 150 mm; Table size 1800 x 2000 mm; Table load 15000 kg; Travels X 3000 mm, Y 2000 mm, Z 1500 mm, W 1000 mm; Spindle drive 36 kW; Spindle speed range 5 - 1200 rpm; Tool magazine positions 50; D’Andrea facing head;


CNC Table Type Boring & Milling Machine with Tool Changer

FEMCO BMC-110R2 2003-Unused; Fanuc 18M control; Boring spindle diameter 110 mm; Table size 1440 x 1600 mm; Table load 6300 kg; Travels X 2000 mm, Y 1800 mm, Z 1700 mm, W 700 mm, B 0.001°; Spindle drive 18.5 kW; Spindle speed range 5 - 2000 rpm; Tool magazine positions 60; Linear scales; Chip conveyor;


NC-Floor Boring & Milling Machine INNOCENTI FAF 200/305

1959/1987; Bosch MC 100 control; Boring spindle diameter 200 mm; Column longitudinal traverse X 18000 mm ; Spindle vertical traverse Y 4500 mm ; Ram traverse Z 1000 mm ; Spindle axial traverse W 2000 mm ; ISO 60; Spindle motor rating 46 kW; Spindle speeds 0.6 - 460 rpm;


20




CNC Hydrostatic Table Type Boring & Milling Machine with Tool Changer

INNSE ZENITH 2/25 1991/2006; Siemens 840C control; Boring spindle diameter 150 mm; Table size 2000 x 2500 mm; Table load 25000 kg; Travels X 4000 mm, Y 2500 mm, Z 2500 mm, W 800 mm; Spindle drive 53 kW; Spindle speed range 5 - 2300 rpm; Tool magazine positions 60; Head magazine; Facing head; All axes and table are hydrostatically sustained; COMPLETELY OVERHAULED WITH GUARANTEE ! (Optionally with Pallet changer)


CNC-Floor Boring & Milling Machine

SCHIESS OFB 160 1976/1997; Bosch CC 220 control; Boring spindle diameter 160 mm; Table size 1400 x 1200 mm; Table load 10 000 kg; Column longitudinal traverse X 6000 mm ; Spindle vertical traverse Y 2650 mm ; Ram traverse Z 700 mm ; Spindle axial traverse W 1200 mm ; Milling spindle traverse W2 1200 mm ; Table infeeding traverse V 950 mm ; Table indexing B-axis 0.001°; Spindle motor rating 35 kW; Spindle speeds 1.6 - 1000 rpm; Angular head; Coolant unit; SUPERB CONDITION !


CNC Table Type Boring & Milling Machine WOTAN Rapid 1K

1982; Kongsberg CNC control; Boring spindle Ø 120 mm; Table size 900 x 900 mm, load 3000 kg; Table indexing B-Axis 0.001°; Extra Peiseler NC-Table AWU 650/800 B-2 Axis 0.001°; Travels X 1600 mm, Y 1200 mm, Z 1000 mm, W 600 mm; Spindle drive motor 20/56 kW; Speed range 3 – 2000 rpm; ISO 50; 60-station tool magazine; Excellent mechanical condition; Can be used as is OR lends itself very well for a Heidenhain/Siemens retrofit !


CNC Table Type Boring & Milling Machine WOTAN Rapid 2R/25

1993; Siemens 880M control; Boring spindle Ø 140 mm; 2 pallets: size 2000 x 2500 mm, load 25000 kg; Table indexing 0.001°; Travels X 4000 mm, Y 2000 mm, Z 800 mm, W 3000 mm, U 170 mm; Spindle drive motor 56 kW; Speed range 4 – 3000 rpm; Faceplate Ø 680 mm; 60-station tool magazine; Angular milling head 360°; Vertical milling head 4 x 90°; In-process measuring system; X,Y,W linear scales; External & internal coolant supply;


21




Table and Floor Type Borer

Ram Type Floor Boring & Milling Machine INNOCENTI FAF 160

1970; Spindle diameter 160 mm; Travels X 11000 mm, Y 3500 mm, Z 600 mm, W 1200 mm;


Floor Type Boring & Milling Machine

SCHARMANN WB 125v 1955; Spindle Ø 125 mm; Travels X 4000 mm, Y 1750 mm, Z 1200 mm; Spindle drive motor 12/16 kW; Speed range 3.4 – 650 rpm; Facing head Ø 640 mm; Floor plate size 3000 x 4000 mm & 1750 x 2500 mm; Heidenhain 3-axis Digital Read Out; Plenty of tooling and accessories;


Radial Drilling Machines

Twin Machines - Two Radial Drilling Machines on One Bed NOVISA RTPO 100/3180 SP

1998/UNUSED; Drilling capacity steel/cast iron 100/120 mm; Boring capacity steel/cast iron 230/280 mm; Threading capacity steel/cast iron 80/100 mm; Quill diameter 130 mm; Taper MK6; Spindle vertical travel 600 mm; Spindle speeds 10 - 1545 rpm; Throat depth spindle - column 3180 mm; Spindle horizontal travel on arm 2810 mm; Arm vertical travel 1250 mm; Spindle to floor min/max 1255/3105 mm; Spindle motors 20 kW; Bed length (track length) for the two machines - Travel 20000 mm (10 m each);

Proposal Number: V-1445

22




CNC Deep Hole Boring Machines

CNC Twin Spindle Deep Hole Boring Machine KOLB HTB II-S

1995/Unused; Siemens 840C control; Boring capacity steel/casting 100/120 mm; Tapping steel / cast iron 80/100 mm; Column longitudinal travel 6000 mm; Spindle vertical travel 4.000 mm; Spindle horizontal travel 1100 + 600 mm; Machine bed ~ lower (main)spindle min/max 2100/4100 mm; Main spindle drive motor 70 kW; 2nd spindle drive motor 35 kW;


Grinding Machines CNC

Internal Grinding Machine OVERBECK 600DC

1983 ; Ex UNIVERSITY; Nahr Controls CNC 462 control; Swing diameter 300 mm; Work piece diameter up to 300 mm; Grinding diameter max. 250 mm; Centre height 150 mm; Table travel max. 300 mm; Grinding length max. 250 mm; Infeed 100 mm; Spindle drive motor 8 kW; Grinding spindle speeds up to 42000 rpm; ex University; VERY GOOD CONDITION !


CNC Cylindrical Grinding Machine OKUMA GP-36F

1996; OSP 5020G control; Centre distance 1000 mm; Swing over table 330 mm; Max. grinding diameter 300 mm; Max. workpiece weight 300 kg; Grinding wheel: diameter 610 mm, width 135 mm, taper bore 254 mm; Grinding spindle speeds 1409 – 1868 rpm; Grinding spindle drive motor 15/11 kW; C-axis motor 3.6 kW; Tailstock;


23




Roll Grinding Machines

Roll Grinding Machine SAFOP LEONARD 40/R

1978/1996; Grinding length 8000 mm; Max. length of rolls 11500 mm; Workpiece weight 20000 kg; Min/Max grinding diameter 300/1200 mm; Grinding units: 1x grinding wheel 700 x 75 mm for wet grinding, 1x belt grinding unit for dry grinding; Vacuum suction unit; Lenz frequency converter; Heidenhain measuring unit; 50 grinding belts; 19 grinding wheels; Spare parts; All functions via PC; Cambering + and - /; Grinding drive motor 17 kW, for belt grinder 11 kW;


Heavy Duty Roll Grinding Machine

TOSHIBA KR-1890B 1967; Capacity 1800 mm x 9000 mm; Swing Ø over bed 2040 mm; Max. workpiece weight 130 tonnes ! Grinding wheel Ø 915 mm, grinding wheel width 100 mm; Camber max. 5; Roll speed range 5 – 25 rpm;


Heavy Duty Roll Grinding Machine CRAVEN

Approx. 1976; Capacity 1830 mm x 8230 mm; Max. workpiece weight 75 tonnes ! Grinding wheel Ø 914 mm; Taper grinding; Cambering;


Plate Bending Machines CNC

3-Rolls Plate Bending Machine GRENEN Hydrocraft HPV 30/3

1982; Max. plate width 3000 mm; Max.plate thickness 30 mm; Pre bending 28 mm; Top roll diameter 470 mm; Bottom roll diameter 400 mm; Corrugating capacity !


24




4-Rolls Plate Bending Machine HAEUSLER VRM-hy 4000 x 160/190

1982; 2 driven rolls top & lower rolls; Bending capacity cold max. 4000 x 160 mm; Bending capacity warm max. 4000 x 190 mm; Top roll Ø 1320 mm; Bottom roll Ø 1250 mm; Side rolls Ø 1020 mm;


3-Rolls Vertical Panel Bending Machine HAEUSLER HVMB 2500

1997; Meier CNC controls; Used for bending of boiler tube panels; Max. bending width 2500 mm; Number of bending tools with forming rolls : 3; Tube diameter minimum 25.4 x 3.2 mm; Tube diameter maximum 82.6 x 9 mm; Max. bending force 600 Tonnes; Ask for more data..


Plate Bending Machine KRAMATORSK 8000 x 156

1965; Machine weight 426 Tonnes; Hot bending capacity: Plate width 1000 mm, diameter 5000 mm, 156 mm thickness; Plate width 8000 mm, diameter 5000 mm, 76 mm thickness. Cold bending capacity: Plate width 1000 mm, diameter 5000 mm, 87.5 mm thickness; Plate width 8000 mm, diameter 5000 mm, 42 mm thickness. Minimum bending diameter 1000 mm


25




Robots CNC

CNC Robot with 6 Controlled Axes GMF-FANUC S360R

1985; Demo machine delivered to customer in 1991; Fanuc teach in control; Max. work piece weight 60 kg; 6-Axis;


CNC Welding Robot

KUKA IR 363/8/15.0 1989; Siemens CNC control; 6-axis welding robot; Practically new;


EDM Die Sinking Machines CNC

LARGE CNC Die Sinking Machine CHARMILLES Roboform Megaform 935

1996; CNC control; Max. workpiece size L 2450 x W 1200 mm; Max. distance table ~ ram head 1350 mm; Max. workpiece height 800 mm; Max. electrode weight 5000 kg; Max. workpiece weight 19000 kg; LIKE NEW !


Shaping/Slotting Machines

LARGE Horizontal Shaping/Slotting Machine WALDRICH COBURG 3HT 2832

1971; Conventional. Stroke approx. 2000 mm. Column travels on bed; Column swivels allowing tangential work; Very large and heavy duty machine


26




Tables

Rotary Traversing Table ASQUITH

Table size 4572 x 2.743 mm; Table load 75000 kg; Table height 1500 mm; Table travel 1829 mm; Feed range variable 3 – 1500 mm/min; Excellent condition !


Hydrostatic Rotary Traversing Table

COLGAR TRT 1200 Can be connected to a CNC control; Table size 1600 x 1800 mm; Table load 12000 kg; Table rotation B-Axis 0.001°; Table travel W-Axis 1000 mm; Heidenhain linear scales; Almost unused = Very good condition!


Steel Production

Steel Melting & Copntinuouis Casting Line ASEA & VOEST ALPINE

80 Tonnes EAF Furnace; Voest Alpine continuous caster for blooms, slabs and billets; Capacity per year between 280000-400000 T; Complete plant for sale; Details upon request;


27




Have we whetted your appetite? Would you like to know more? VIEW OUR THOROUGHLY CHECKED MACHINES UNDER POWER ! ASK OUR STAFF TO PROVE OUR MEASUREMENTS ! ASK OUR STAFF TO EVALUATE YOUR WORK PIECES ! HAVE YOUR MACHINES LASER MEASURED BY US ! YOUR TRIP TO VIEW OUR MACHINES ANYWHERE IN THE WORLD WILL BE PAID BY US IF YOU PURCHASE !!! AND MUCH MORE......................... We want to do business with YOU, so... Call us, fax. us, or visit us in our GARDEN showroom in Germany!

WELCOME TO D’CUNHA INDUSTRIEMASCHINEN GMBH

NEUES ROLAND 1 29223 CELLE, GERMANY

Tel.: (++49) - 5141 – 93770 / Fax.: (++49) - 5141 - 9377-70

E-Mail: [email protected]

Website: http://www.dcunha-cnc.com

OUR AIM IS TO ATTAIN.....

LIKE OUR KINGFISHER

‘NATURAL PRECISION’

d’cunha industriemaschinen gmbh2006/05/01 · d’cunha industriemaschinen gmbh neues roland 1 d-...

Documents