daikin airconditioning (singapore) pte. ltd. · floor standing type compact multi flow ceiling...

AIR CONDITIONING SYSTEM [50Hz]

360° airflow!!

RZR71LVVMRZR50LVVM RZR60LVVM RZR100LVVM RZR125LVVM All rights reserved 05/14 SSc

1. Air conditioners should not be installed in areas where corrosive gases, such as acid gas or alkaline gas, are produced.2. If the outdoor unit is to be installed close to the sea shore, direct exposure to the sea breeze should be avoided. If you need to install the outdoor unit close to the sea shore, contact your local distributor.

Cautions on product corrosion

Warning Ask a qualified installer or contractor to install this product. Do not try to install the product by yourself. Improper installation can result in water or refrigerant leakage, electrical shock, fire or explosion.Use only those parts and accessories supplied or specified by Daikin. Ask a qualified installer or contractor to install those parts and accessories. Use of unauthorised parts and accessories or improper installation of parts and accessories can result in water or refrigerant leakage, electrical shock, fire or explosion.Read the User's Manual carefully before using this product. The User's Manual provides important safety instructions and warnings. Be sure to follow these instructions and warnings.

If you have any enquiries, please contact your local importer, distributor and/or retailer.

PCSSG0814

Specifications, designs and other content appearing in this brochure are current as of May 2014 but subject to change without notice.

No. 10 Ang Mo Kio Industrial Park II Singapore 569501Tel. +65-6-5838888 Fax. +65-6-3497310 / 311www.daikin.com.sg

DAIKIN AIRCONDITIONING (SINGAPORE) PTE. LTD.

FLOOR STANDING TYPE

COMPACT MULTI FLOW CEILING MOUNTED CASSETTE TYPE

CEILING MOUNTED BUILT-IN TYPE

DUCT CONNECTION MIDDLE and HIGH STATIC PRESSURE TYPE

1 2

Daikin meets your needs with this full lineup of inverters for various types of indoor units and power supplies.

WALL MOUNTED TYPE

CEILING SUSPENDED TYPE

CEILING MOUNTED CASSETTE TYPE Round Flow

Page 21

Page 19

Page 21

Page 7

Page 19

Page 15

Page 17

Page 13

Page 7

Page 11

Page 23

RZR140LUY1RZR140LVVMRZR125LUY1RZR125LVVMFHQ71BVV1BX2FHQ60BVV1GX2

Outdoor unitIndoor unit


RZR140LUY1RZR140LVVMRZR125LUY1RZR125LVVMFVQ71CVEBX2FVQ60CVEX2


FLOOR STANDING TYPERZR140LUY1RZR140LVVMRZR125LUY1RZR125LVVM

FBQ71DV1X2FBQ60DV1X2Outdoor unitIndoor unit


RZR60LVVM RZR71LVVM RZR140LUY1RZR140LVVMRZR125LUY1RZR125LVVMRZR100LUY1RZR100LVVMFVQ140CVEBFVQ125CVEBFVQ100CVEB

RZR50LVVMFVQ60CVE FVQ71CVEBFVQ50CVE


FLOOR STANDING TYPE

RZR140LUY1RZR140LVVMRZR125LUY1RZR125LVVMFCQ71LUV1X2FCQ60LUV1X2


RZR60LVVM RZR71LVVM RZR140LUY1RZR140LVVMRZR125LUY1RZR125LVVMRZR100LUY1RZR100LVVMFBQ140DV1FBQ125DV1FBQ100DV1

RZR50LVVMFBQ60DV1 FBQ71DV1FBQ50DV1



RZR71LVVM RZR100LUY1RZR100LVVMFAQ100CVEAFAQ71CVEA


WALL MOUNTED TYPERZR60LVVM RZR71LVVM RZR140LVVMRZR125LUY1RZR125LVVMRZR100LUY1RZR100LVVM

FHQ140CAVEBFHQ125BVV1BFHQ100BVV1BRZR50LVVM

FHQ60BVV1G FHQ71BVV1BFHQ50BVV1GRKS35AVMGFHQ35BVV1B



RXS60FVMA RXS71FVMARXS50FAVMARKS35AVMGRKS25AVMGOutdoor unit

OUTDOOR UNIT

3 4

71 100 125 14060

RZR60LVVM RZR71LVVM RZR140LUY1RZR140LVVMRZR125LUY1RZR125LVVMRZR100LUY1RZR100LVVMFCQ140LUV1FCQ125LUV1FCQ100LUV1

50

RZR50LVVMFCQ60LUV1 FCQ71LUV1FCQ50LUV1

3525


CEILING MOUNTED CASSETTE TYPE

Round Flow


Round Flow

Series

Pair

NEW

NEW

NEWNEW

NEWNEW

NEWNEW

NEWNEW

NEWNEWNEWNEWNEW

RKS35AVMGFFQ35BV1B

RKS25AVMGFFQ25BV1B



RZR140LUY1RZR125LUY1RZR100LUY1Outdoor unit

OUTDOOR UNIT

Sim

ulta

neou

s Tw

in M

ulti

P r o d u c t L i n e u p

RXS60FVMA RXS71FVMARXS50FAVMAFBQ60BV1A FBQ71BV1AFBQ50BV1A



NEW RZR50LVVM NEW RZR60LVVM NEW RZR71LVVM NEW RZR100LVVM NEW RZR125LVVM NEW RZR140LVVM

5 6

Comfortable currents of air are sent to every corner of the room.

Simultaneous twin multi operationSimultaneous twin multi operation

Refrigerant branch piping kit for Twin Multi operation 2 sets of Twin Multi

For example, four indoor units are judiciously spaced in this wide

single-floor restaurant to deliver comfortable currents of air to every corner of the room.

Achieved higher COP with 4 Tick Energy LabelEnergy savingEnergy saving

New types of indoor unitsNew types of indoor units

COP is equal to capacity (kW) divided by power consumption (kW), and the larger the COP value, the higher the energy efficiency, enabling cooling and heating with less electricity and increasing the energy saving performance.

Note : *Rated cooling capacities are based on the following conditions: Indoor temp., 27°CDB, 19.0°CWB; outdoor temp. 35°CDB, 24.0°CWB. Equiv. refrigeration piping, 7.5 m (horizontal).

What is COP (Coefficient of Performance)

COP

2

3

4

5

FCQ50LUV1RZR50LVVM

Coo

ling*

FCQ140LUV1RZR140LVVM

2.85

Coo

ling*


3.40

Coo

ling*


3.60

Coo

ling*

FCQ71LUV1RZR71LVVM

3.57

Coo

ling*

FCQ60LUV1RZR60LVVM

4.874.30

Coo

ling*


Round Flow

Non-inverter

Inverter Time

Running current

Starting current

Time

Running current

Cur

rent

Cur

rent

At startup, full power is used to achieve the set temperature quickly. Then, the capacity is adjusted according to the outdoor temperature changes and subtle indoor load changes to achieve fine capacity control resulting in a more stable room temperature.Non-inverter type air conditioners must be switched on and off repeatedly, causing large fluctuations of the room temperature.

Inverter performs variable control of frequency, which determines air conditioner’s power performance.

Enhanced comfort with Inverter

Small temp. differenceCools a room

in less time

Cooling operation

Inverter power controlNon-inverter type air conditioner

Time

Temp

Set temp

ComfortableComfortableAt startup, inverter raises frequency smoothly, eliminating the starting current spike.

26 new combinations added!

Wider lineup of invertersWider lineup of invertersDaikin meets your needs with this full lineup of inverters for various types of indoor units and power supplies.


Round Flow


CEILING MOUNTED CASSETTE TYPERound Flow


WALL MOUNTED TYPE



FLOOR STANDING TYPE



FLOOR STANDING TYPE

Pair

Twin

503525 60 71 100 125 140

: New Lineup : Continuous

1 Phase

1 Phase

3 Phase

1 Phase

3 Phase

1 Phase

1 Phase

3 Phase

1 Phase

3 Phase

1 Phase

3 Phase

1 Phase

3 Phase

1 Phase

3 Phase

1 Phase

3 Phase

1 Phase

3 Phase

RZR50LVVM RZR60LVVM RZR71LVVM RZR100LVVM RZR125LVVM

Page 28

Floor standing type 5.0-14.0 kW class

Ceiling suspended type 14.0 kW class

NEW NEW

Airflow distribution

Creates uniform comfort throughout

the space

Comfort enhanced by Round Flow!

With uniform temperature distribution

Enhanced Comfort

Greater comfortImproved energy saving

• Condition after exposure to the smoke of 600 cigarettes in 1 m3 enclosed space.

Treated surface

Untreated surface

Grimy surface

Resists soiling

External panels are treated with a coating that repels dirt.

Mould-proof drain pan includes a silver ion antibacterial agent that assists in preventing the growth of slime, bacteria, and mould that cause smells and clogging.

Avoids uneven temperature and discomfort caused by drafts.

To prevent dirt sticking to the external panels, they have been coated with a surface treatment.

Because air flows out from corner outlets, comfort spreads more widely.

360° airflow Air movement is gentle with Round Flow

Condensation does not easily form on and dirt does not cling to non-flocking flaps. It is easy to clean.

Non-flocking flapsSilver ion anti-bacterial drain pan

Prevents mould and microorganisms growing out of the dust and moisture that adheres to the filters.

Filter has anti-mould and bactericidal treatment

Grime prevention and bactericidal coating: Make cleaning easier.

Adapts easily to the installation space.

Note: Whatever the discharge direction, the same type of panel is used. If installing for other than all-round flow, an air discharge outlet sealing material (option) must be used to close each unused outlet.

3-way flow L-shaped 2-way flow

Opposite 2-way flow

(E.g., installed in a corner)

(E.g., installed in a long room)

(E.g., installed near a wall)

(E.g., installed in middle of ceiling)

4-way flow also possible.

All-round flow

360° airflow can maintain comfort even if air discharge speed is lower.

Typical flow patterns There are a total of 23 flow patterns.

If you raise the set temperature by 1 to 1.5°C,and velocity is decreased by 25%, you still obtain the same feeling temperature and comfort.

Operation sound increases when using 2-way or 3-way flow.

• • • • • *1 *2 • *2 • • • *2 • • • • • • • • • • *2

CleanlinessComfort Work & Servicing Control features OthersOptionsFeatures

Accessory required for indoor unit.Option

*1Applicable when wired remote controller is used*2For the outdoor units

*3Applicable when BRC1E62 is used*4Applicable when BRC1C61 is used


FCQ50/60/71/100/125/140LU

Swin

g pa

ttern

sel

ectio

nSw

itcha

ble

fan

spee

d (2

ste

p)

Auto

sw

ing

Prog

ram

me

"Dry

"

Hig

h ce

iling

appl

icat

ion

Nig

ht q

uiet

ope

ratio

n

Dra

in p

ump

mec

hani

sm

•

Silv

er io

n an

ti-ba

cter

ial

drai

n pa

n

•

Anti-

bact

eria

l air

filte

r

Pre

char

ged

for

up to

30

m

Long

-life

filte

r

Filte

r sig

n

Cei

ling

soilin

g pr

even

tion

Low

gas

pre

ssur

e de

tect

ion

Emer

genc

y op

erat

ion

Self-

diag

nosi

s fu

nctio

n

Ultr

a lo

ng-li

fe fi

lter

•

Hig

h-ef

ficie

ncy

filte

r

Fres

h ai

r int

ake

kit

Con

trol b

y 2

rem

ote

cont

rolle

rs

Auto

-rest

art

Gro

up c

ontro

l by

1 re

mot

e co

ntro

ller

Exte

rnal

com

man

d co

ntro

l

Cen

tral r

emot

e co

ntro

l

Inte

rlock

con

trol

•

DIII

-NET

com

mun

icat

ion

stan

dard

Anti

corro

sion

trea

ted

heat

exc

hang

ers

Two

sele

ctab

le

tem

pera

ture

-sen

sors

Round Flow

BRC1E62

Navigation Remote Controller(Wired Remote Controller)

BRC7F633F

A signal receiver must be added to the indoor unit.

Wireless remote controller and signal receiver unit are sold as a set.

Wireless LCD remote controller

Signal receiver unit (Installed type)

Note: Remote controller cable not included. Cables must be procured locally.


Wired LCD remote controller

BRC1C61

7 8

Remote controller

*3 *3 *3 *3 *4

Setp

oint

rang

e se

t

Wee

kly

sche

dule

tim

er

Setp

oint

aut

o re

set

Off

timer

(pro

gram

med

)

On/

Off

timer

Cassette air conditioner with 360° uniform airflow sets the standardCassette air conditioner with 360° uniform airflow sets the standard

Options required for specific operating environments

High-efficiency filterAvailable in two types: 65% and 90% colorimetry.

Using this kit, a duct can be fitted to increase the intake of outdoor air.

*Connecting ducts, insect nets, fire dampers, air filters, and other parts should, as required, be procured locally.

**Outside Air fan interlocked with air conditioning unit is necessary. Optional PCB(KRP1C63)is required for interlocking.

***It is recommended that the volume of outdoor air introduced through the kit is limited to 10% of the maximum airflow rate of the indoor unit. Introducing higher quantities will increase the operating sound and may also influence temperature sending.

Fresh air intake kit

Even in smoky environments where the air conditioning is on most of the time, the ultra long-life filter only has to be changed once a year.

Ultra long-life filter Panel spacerUse when only minimal space is available between drop ceilings and ceiling slabs.

Sealing material of air discharge outletSealing material block air discharge openings not used in 2-way or 3-way blow.

Branch duct (direct-connection round duct)Outside

Note: Use of options will increase operating sound.

The units can be installed in the following different ways.

Note: Some ceiling constructions may hinder installation. Contact your Daikin Dealer before installing your unit.

Direct installation type

Flexible duct

T-joint pipe

Intake duct(procured locally)(duct length: 4 m max.)

Intake duct(procured locally)(duct length: 4 m max.)

Connectionchamber

Suctionchamber

Duct flange (with insulation material) Intake duct(procured locally)

Chamber type (with T-joint pipe and without fan)

Flexible duct(procured locally)T-joint pipe(procured locally)

Chamber type (without T-joint pipe and fan)

KDDP55X160KDDP55B160K KDDP55B160

Easier to maintain

With Ultra long-life filters (option), maintenance is not required in normal shops or offices for up to four years.

The condition of the drain pan anddrain water can be checked byremoving the drain plug andintake grille. Drain plug

Just open the

intake grille!

40mm

Panel spacer

A round duct can be attached without the need for a chamber.A flanged port for direct connection of a round duct is provided. An existing branch duct chamber can also be fitted (square slit hole).

Connectionchamber

Suctionchamber

Smoky atmosphere: annual filter change

Ordinary store or office: filter change every 4 years

*For dust concentration of 0.3 mg/m3 (Requires separately sold Air Cleaner.) 1 year (Approx. 5,000 hr) 15 hr/day x 28 day/month x 12 month/year

*For dust concentration of 0.15 mg/m3

4 years (Approx. 10,000 hr) 8 hr/day x 25 day/month x 4 years

Note:

Quick and easy to installJust 256 mm high. Installable in tight ceiling spaces (50LU-71LU)

Fine square panels Compact body and quiet operation

*Temperature-sensor on indoor unit must be used when the air conditioner is controlled from another room. **Wireless remote controller does not have a temperature-sensor.

Note : Anechoic chamber conversion value, measured according to JIS parameters and criteria. During operation these values are somewhat higher owing to ambient conditions.

Note: Air direction is set to the standard position when the unit is shipped from the factory. The position can be changed from the remote controller.

Panel size is same for all models, FCQ50-140LU.It is easy to maintain a neat appearance when multiple units are installed.

Optimal comfort and convenience assured by air discharge modes

Both indoor unit and wired remote controller (option) contain temperature- sensors. Temperature sensing can be set at the unit or, to further improve comfort level, closer to the target area at the wired remote control. This feature must be set during commissioning by the technicians.

Two selectable temperature-sensors

Even in spaces with high ceilings, a comfortable airflow is carried down to the floor level.

Suitable for high ceilings

Operation starts when the preset time of the ON timer elapses and stops when the preset time of the OFF timer elapses.

On/Off timer

Indoor unit High Low

125LU 44 34140LU 44 36

100LU 43 3271LU 35 2860LU 35 2850LU 35 28

dB(A)

Same for all models

Air direction

Auto air direction control

Settable to 5 different levels between 15° and 60°


Auto-swing between15° and 60°

Auto-swing between25° and 60°

Recommended for shops with light coloured ceilings that

must be kept spotless.Standard position to

prevent draft.

Standard setting Setting to prevent soiling of ceiling*

The air direction is set automatically to the memorised position of the previous air direction.

Desired situation

Auto-swing

5-levelsair directionsetting

*Closing of the corner discharge outlets is recommended.

Number of air discharge outlets used

4-wayflow

3-wayflow

2-wayflow

4-wayflow

3-wayflow

2-wayflow

3.1 m3.4 m4.0 m

All round flow

2.7 m3.0 m3.5 m

3.0 m3.3 m3.5 m

3.5 m3.8 m-

3.4 m3.9 m4.5 m

All round flow

3.2 m3.6 m4.2 m

3.6 m4.0 m4.2 m

4.2 m4.2 m-

StandardCeiling height High ceiling

High ceiling

Criteria for ceiling height and number of air discharge outlets

950 mm 950 mm

Note: Factory settings are for standard ceiling height and all-round flow. High ceiling settings (1) and (2) are set with the remote controller by field setting.

256 mm *1 266 mm *2

*1 298 mm high with 100LU–140LU*2 308 mm high with 100LU–140LU

All models can be installed without using lifter because of the light weight.

Connection to a centralised control system is available without option

Low gas pressure detection

Drain pump is equipped as standard accessory with 850 mm lift.

Transparent drain socket

Each corner of the unit has an Adjuster Pocket that lets you easily adjust the unit's suspended height.

Since the orientation of the intake grill can be adjusted after installing,the direction of the intake grill lines can be unified when multiple unitsare installed.

Note: If the wireless remote control option is installed, a light receptor unit is housed in one of the adjuster pockets.

Easy height adjustment

Installable in any direction

Because the drain socket is transparent, after the drain piping has been installed, it is easy to check if the drain come out through the socket.High setting provides maximum reach while low

setting minimises drafts.

Switchable fan speed: High/Low

175 mm

850 mm

100LU–140LU50LU–71LU

9 10

CEILING MOUNTED CASSETTE TYPE Round Flow

(Ceiling height is reference value)

25B 29.5 24.535B 32 25

CompactSized to fit inside 600mm wide ceiling grids



Designed for low draft performance

Consistent comfort throughout

Quiet operation has been achieved even with a compact body and developed spiral hub cover that reduces the static pressure inside the indoor unit.

Both indoor unit and wired remote controller (option) contain temperature- sensors. Temperature sensing can be set at the unit or, to further improve comfort level, closer to the target area at the wired remote control. This feature requires initial setting by the installer.

High setting provides maximum reach while low setting minimises drafts.Switchable fan speed: High/Low


Comfortable

QuietQuiet, small-diameter fan

Multi-Flow System Air direction can be selected according to installation.

1 pattern

4-way flow

4 patterns

3-way flow

1 pattern

2-way flow

" " denotes piping direction. Drain piping " " denotes sealing member for air discharge outlet (option) .Note: For 3-way or 2-way flow installation, the sealing

member for air discharge outlet (option) must be used to close off the unused outlet(s).

Note: Operation sound increases when using 2-way or 3-way flow.

Spiral hub cover

750 mm




Auto-swing between 0° and 35°



Draft prevention setting(Set on site)

(Set on site)

Standard setting

Setting to prevent soiling of ceiling

Auto-swing operation distributes conditioned air more evenly.

Airfow angle can be adjusted in accordance with room conditions.

Auto-swing

0° 0°

0°

25°

60° 60°

0°

35°

25°

60°

35°

60°

5-levels air direction setting

Horizontal flow0° 0°

Less draftcan be felt

575 mm

575 mm

700 mm

700 mm

286 mm

High Low

Fits without the need to cut T-bar grid

T bar

600 mm600 mm

Decoration panel is also

compact.

Note: This angle above is provided as a guide. It may differ depending on the installation site.

Ceiling panel

Indoor unit

The switch box is built in to the unit, so maintenance is possible by simply removing the grill. An inspection opening is not required even for modules other than 600 x 600.


dB(A)


BRC1E62



CleanlinessComfort Work & Servicing Control features OthersOption

Features

*1Applicable when wired remote controller is used*2Applicable when BRC1E62 is used*3Applicable when BRC1C61 is used*4 For the outdoor units


Quiet decor-blending form and easy installation in new or old buildings.Quiet decor-blending form and easy installation in new or old buildings.

Swin

g pa

ttern

sel

ectio

n

Switc

habl

e fa

n sp

eed

(2 s

tep)

Auto

sw

ing

Prog

ram

me

"Dry

"

Dra

in p

ump

mec

hani

sm

Pre

char

ged

for

up to

10

m

Long

-life

filte

r

Filte

r sig

n

Self-

diag

nosi

s fu

nctio

n

Fres

h ai

r int

ake

kit

Con

trol b

y 2

rem

ote

cont

rolle

rs

Auto

-rest

art

Gro

up c

ontro

l by

1 re

mot

e co

ntro

ller

Exte

rnal

com

man

d co

ntro

l

Cen

tral r

emot

e co

ntro

l

Inte

rlock

con

trol

Anti

corro

sion

trea

ted

heat

exc

hang

ers

Two

sele

ctab

le

tem

pera

ture

-sen

sors

• • • • *1 • *4 • •

Cei

ling

soilin

g pr

even

tion

• • • • • • • • • *4

BRC7E531WA signal receiver must be added to the indoor unit.






BRC1C61

•

Anti-

bact

eria

l air

filte

r

•

Mou

ld-p

roof

dra

in p

an

FFQ25/35B

11 12

Remote controller

*2 *2 *2 *2 *3

Setp

oint

rang

e se

t

Wee

kly

sche

dule

tim

er

Setp

oint

aut

o re

set

Off

timer

(pro

gram

med

)

On/

Off

timer

* For dust concentration of 0.15 mg/m3

Uses quiet stream fan and other quiet technologies.

Non-flocking flap

Turbulent flow is reduced

Straightening plate Quiet stream fan

Quiet operation

Easy maintenance


Oil resistant grille

Note: Intended for use in salons, dining rooms, and ordinary sales floors, this specification is not suitable for kitchens or other harsh environments.

Oil-resistant plastic is used for the air suction grille. This satisfies durability in restaurants and other similar environments.

Two time settings (2500 hrs and 1250 hrs) are available to match the installation environment. Maintenance time warning is displayed on the remote controller (filter sign).

Easy-clean, flat surfaces

Long-life filter lasts about 1 year*

Comfortable

Both indoor unit and wired remote controller (option) contain temperature- sensors. Temperature sensing can be set at the unit or, to further improve comfort level, closer to the target area at the wired remote control. This feature requires initial setting by the installer.

Dehumidification is a microprocessor controlled to prevent abrupt and uncomfortable changes in air temperature.


Programme "Dry"

3 fan speeds: High/Middle/Low

Installable on ceilings 4.3 m high

Flexible installation

*Water used in the test-run can now be drained from the air discharge opening rather than from the side as was formerly the case.

The unit fits more snugly into tight spaces.

Flap neatly closes when not in use.

Fresh white colour.

Drain pump kit (option) can be easily incorporatedDrain pipe connection can be done inside the unit. refrigerant and drain pipe outlets are at the same opening.

All wiring and internal servicing can be done from under the unit

Installation flexibility for freedom of design

New 140 model provides greater capacity for large spaces


Pipes more easily rigged


Condensation does not easily form on and dirt does not cling to non-flocking flap. It is easy to clean.

Non-flocking flap

(FHQ35-125BV)

The technology of the DC fan motor, wide sirocco fan, and large heat exchanger combine for greater airflow and quiet operation.

Sophisticated design

Connection to a centralised control system is available, without option.Drain pump kit (option) includes a silver ion antibacterial agent that assists in preventing the growth of slime, bacteria, and mould that cause smells and clogging.

Installable on ceilings 3.5 m high (FHQ35-125BV)

Auto swing (up and down) and louvers (left and right by hand) bring comfort to the room

Louver manually adjusts for straight or wide angle airflow

Switchable fan speed: High/Low (FHQ35-125BV)

30 mm or more

30 mm or more

High/Middle/Low : 46/42/38 dB(A)

50/60BVV1G 39 35

Indoor unit High Low35BVV1B 37 32

71BVV1B 39 35100BVV1B 42 37125BVV1B 44 39

140CA 46

---

Middle---

---------42 38

Sound operation has been reduced on the exposed ceiling suspended type unit. dB(A)

Drain pump kit (built inside main unit)

600 mm


BRC1E62





BRC1C61

A signal receiver must be added to the indoor unit. Wireless LCD remote controller




Comfortable airflow travels throughout the roomComfortable airflow travels throughout the room

FHQ71BV

FHQ140CANEW

35-125BV140CA

BRC7EA66BRC7GA56

CleanlinessComfort Work & Servicing Control features OthersOptions

Features

• *1 • *2 • *4 • • • • • • • *10*4*3 *7

*1FHQ35-125BV: 2 step, FHQ140CA: 3 step*2Installable on max. 3.5 m (35-125BV), 4.3 m (140CA) high ceiling *3Applicable when wired remote controller is used*4Applicable to RZR outdoor units

*5Applicable when BRC1E62 is used*6Applicable when BRC1C61 is used*7Option

*8Applicable to RKS outdoor units*9FHQ140CA only*10For the outdoor units

Pre

char

ged

for

up to

30

m

*8

Pre

char

ged

for

up to

10

m

•

Long

-life

filte

r

•

Anti-

bact

eria

l air

filte

r

Filte

r sig

n

*4

Low

gas

pre

ssur

e de

tect

ion

Emer

genc

y op

erat

ion

Self-

diag

nosi

s fu

nctio

n

Con

trol b

y 2

rem

ote

cont

rolle

rs

Auto

-rest

art

Gro

up c

ontro

l by

1 re

mot

e co

ntro

ller

Exte

rnal

com

man

d co

ntro

l

Cen

tral r

emot

e co

ntro

l

Anti

corro

sion

trea

ted

heat

exc

hang

ers

*9

DIII

-NET

com

mun

icat

ion

stan

dard

*9

Fres

h ai

r int

ake

kit

Inte

rlock

con

trol

Dra

in p

ump

mec

hani

sm

Switc

habl

e fa

n sp

eed

Auto

sw

ing

Prog

ram

me

"Dry

"

Hig

h ce

iling

appl

icat

ion

Two

sele

ctab

le

tem

pera

ture

-sen

sors

Remote controller

*5 *5 *5 *5

Setp

oint

rang

e se

t

Wee

kly

sche

dule

tim

er

Setp

oint

aut

o re

set

*4

Nig

ht q

uiet

ope

ratio

n

Off

timer

(pro

gram

med

)

*6

On/

Off

timer

35-125BV

140CA

FHQ35BVV1B,FHQ50/60BVV1GFHQ71/100/125BVV1B,FHQ140CA

13 14

Comfortable

Maintenance possible from the front of the unitAll maintenance tasks can be carried out via front access. During service work, attachment and detachment of parts is easier.

Dehumidification is microprocessor controlled to prevent abrupt and uncomfortable changes in air temperature.

Programme "Dry"


Comfort even on the far side of the roomTo carry air to the far side of long rooms, extra-high airflow adds 10% more fan speed the "high" setting. Air discharge strength is selected from the remote controller by field setting.

Easy cleaning

6-direction piping offers greater installation flexibility.

Compact & Sophisticated design

FAQ100

Flaps neatly close when not in use

Easy installing and servicing

Drain pump kit is available as option.

Removable and washable grille

Connection to a centralised control system is available without option

Drain pump kit can be installed on either left and right side of the air conditioner.

Height of drain up

Drain pump kitIndoor unit

Installs onto side of unit.

1,000 mm

Refrigerant piping

1,200mm

340mm

370mm shorter

9kg lighterHeight

FAQ100BV360mm

Width 1,570mm

Weight 26kg

FAQ100C340mm

1,200mm

17kg

Depth 200mm 240mm

Auto airflow rate (When BRC1E62 is used)

Switchable fan speed: High/Middle/LowCondensation does not easily form on and dirt does not cling to non-flocking flaps. It is easy to clean.

Non-flocking flaps

Flat panel, easy to wipe dust off

An air discharge modes ensure comfortable air distribution across the entire room

Auto swing (up and down) and wide-angle louvers (left and right by hand) facilitate even room temperature

Auto-swing 5-level air direction setting

Gettable to 5 different levels

Soft material louver bends airflow over a wider area

Wide-angle louvers (by hand)

WALL MOUNTED TYPE

FAQ71C

FAQ100C

FAQ71/100C

BRC1C61


• • •• *4 • *3 • • • • • • • • • *3

CleanlinessComfort Remote controller Work & Servicing Control features Others

Features

*2

*1Applicable when BRC1E62 is used *2Applicable when wired remote controller is used*3For the outdoor units

*4Applicable when BRC1C61 is used*5Option

Switc

habl

e fa

n sp

eed

(3 s

tep)

*1

Auto

airf

low

rate

Auto

sw

ing

Prog

ram

me

"Dry

"

Hig

h fa

n sp

eed

mod

e

On/

Off

timer

*1

Off

timer

(pro

gram

med

)

*1

Wee

kly

sche

dule

tim

er

*1

Setp

oint

rang

e se

t

*1*3

Setp

oint

aut

o re

set

Pre

char

ged

for

up to

30

m

Mou

ld-p

roof

air

filte

r

Filte

r sig

n

Emer

genc

y op

erat

ion

Self-

diag

nosi

s fu

nctio

n

Con

trol b

y 2

rem

ote

cont

rolle

rs

Auto

-rest

art

Anti

corro

sion

trea

ted

heat

exc

hang

ers

•

DIII

-NET

com

mun

icat

ion

stan

dard

*5

Dra

in p

ump

mec

hani

sm

*3

Low

gas

pre

ssur

e de

tect

ion

Gro

up c

ontro

l by

1 re

mot

e co

ntro

ller

Exte

rnal

com

man

d co

ntro

l

Cen

tral r

emot

e co

ntro

l

Inte

rlock

con

trol

Two

sele

ctab

le

tem

pera

ture

-sen

sors

Nig

ht q

uiet

ope

ratio

n

Right pipe

Left pipe

Back-left pipe

Back-right pipe

Bottom-left pipe

Bottom-right pipe

BRC7EB519A signal receiver must be added to the indoor unit.




Compact design and easy installationCompact design and easy installation


BRC1E62



15 16

CompactCompact design of built-in type helps blend with interior decor.

Work & Servicing

Comfortable

Height reduced to allow installation in confined spaces.

Flexibly adapts to shop interiors

L-shaped space U-shaped space Long space

To cope with the challenges of L-shaped or U-shaped spaces, it is possible to install the air discharge unit away from the main unit. At the same time, different types of architectural space can be kept comfortable.

The height of the unit is a mere 300 mm. It can be installed in a narrow ceiling space.(when access panel is used.)

Provided with condensate drain pump, waking drain piping easier in awkward spaces.

External static pressure can be set depending on duct length, presence of high-efficiency filter, and other installation conditions.

Access panel

250mm

Access panel

300mm300mm



Both indoor unit and wired remote controller (option) contain temperature-sensors. Temperature sensing can be set at the unit or, to further improve comfort level, closer to the target area at the wired remote control. This feature requires initial setting by the installer.

(mm)

71B 34 3060B 34 30

Indoor unit High Low50B 33 29

30060/71B

1,000800

Height

Indoor unit

WidthDepth

700

50B

Quiet operation


Programme "Dry"

Switchable fan speed: High/Low

dB(A)


High Standard88

Indoor unitExternal static pressure pattern

50B–71B 49 20Low

External static pressure is set to standard when the unit is shipped from the factory.

(Pa)

Control featuresWork & ServicingComfort Others


Clever and compact mini ducted unit provides comfort and flexibility.Clever and compact mini ducted unit provides comfort and flexibility.

Features

FBQ50/60/71B

*1Applicable when wired remote controller is used*2Applicable when BRC1E62 is used*3Applicable when BRC1C61 is used*4For the outdoor units

FBQ50BV1A

BRC4C62A signal receiver must be added to the indoor unit.



Signal receiver unit (Separate type)

• • *4*1 • • • • • • • *4•

Switc

habl

e fa

n sp

eed

(2 s

tep)

Prog

ram

me

"Dry

"

Pre

char

ged

for

up to

10

m

Filte

r sig

n

Self-

diag

nosi

s fu

nctio

n

Anti

corro

sion

trea

ted

heat

exc

hang

ers

Con

trol b

y 2

rem

ote

cont

rolle

rs

Auto

-rest

art

Gro

up c

ontro

l by

1 re

mot

e co

ntro

ller

Exte

rnal

com

man

d co

ntro

l

Cen

tral r

emot

e co

ntro

l

Inte

rlock

con

trol

Two

sele

ctab

le

tem

pera

ture

-sen

sors

•

Mou

ld-p

roof

dra

in p

an

•

Dra

in p

ump

mec

hani

sm



BRC1C61

Cleanliness

17 18

Remote controller

*2 *2 *2 *2 *3

Setp

oint

rang

e se

t

Wee

kly

sche

dule

tim

er

Setp

oint

aut

o re

set

Off

timer

(pro

gram

med

)

On/

Off

timer


BRC1E62



Increased freedom of design thanks to variable control over external static pressure

Comfort airflow achieved in accordance with conditions such as duct length.Using a DC fan motor, the external static pressure can be controlled within a range of 50 Pa to 200 Pa.

Thin, lightweight indoor unit makes delivery and installation easy.

With a height of only 300 mm, installation is possible even in buildings with narrow ceiling spaces.


300100D 125D 140D

1,000

36

1,400700

HeightIndoor unit

WidthDepth

46Machine weight

50/60/71D

Freely control external static pressure

50 Pa 200 Pa

Set to high static pressure for advanced needs such as when using dampers and long ducts.

Set to low static pressure when ducts

are short.

Simultaneous air conditioning of two rooms and ventilation grille (ventilation opening)

Ventilation grille

Door-installedventilation grille

Ventilation grille

Wall-installedventilation grille

Under-door cutout

Under-door cutoutWhen air conditioning two rooms simultaneously, the air discharged into each room must be circulated back to the air conditioner. To achieve this, a ventilation duct should be installed for each room or one of the indicated ventilation grilles should be installed on the partitioning wall or under the door between the rooms.

Ventilates air through the partitioning wall. (See right)

Partitioning wall

Note: The under-door cutout method should be used only when there is a small volume of airflow.

(mm)

(mm)

(mm)

(kg)

Quiet operation

When testing standard integrated ceiling units that employ duct work, much time used to be required to adjust airflow to the right level. Thanks to the ability provided by Daikin to automatically perform this troublesome adjustment using a remote controller, this step is now quick and easy. (Adjust by H tap .)1. Adjust to approximately ±10% of the rated H tap airflow. 2. Once actual operation has begun, adjustment of the rated airflow is not possible.

Reduced installation timeUse remote controller to adjust airflow


Silver ion anti-bacterial drain pan

Maintenance is easy because the drain pan can be removed.

Easy maintenance

Clean

Both indoor unit and wired remote controller (option) contain temperature- sensors. Temperature sensing can be set at the unit or, to further improve comfort level, closer to the target area at the wired remote control.This feature requires initial setting by the installer. *Temperature-sensor on indoor unit must be used when the air conditioner is controlled from another room.

**Wireless remote controller does not have a temperature-sensor.


Comfortable

dB(A)

100D 125/140DHighLow

38 4033 36

50/60/71D3732

700 mm

300mm

Easier connection with the centralised control system


BRC1E62



Control featuresWork & ServicingComfort Cleanliness OthersOption


Features

*1Applicable when wired remote controller is used*2For the outdoor units*3Applicable when BRC1E62 is used*4Applicable when BRC1C61 is used*5Option

• *2• *1 *2 *2• • • • • • • *2• •

Switc

habl

e fa

n sp

eed

(2 s

tep)

Prog

ram

me

"Dry

"

Nig

ht q

uiet

ope

ratio

n

*5

Anti-

bact

eria

l air

filte

r

•

Silv

er io

n an

ti-ba

cter

ial

drai

n pa

n

Pre

char

ged

for

up to

30

m

Filte

r sig

n

Self-

diag

nosi

s fu

nctio

n

•

Emer

genc

y op

erat

ion

Low

gas

pre

ssur

e de

tect

ion

Anti

corro

sion

trea

ted

heat

exc

hang

ers

Hig

h ef

ficie

ncy

filte

r

Con

trol b

y 2

rem

ote

cont

rolle

rs

Auto

-rest

art

Gro

up c

ontro

l by

1 re

mot

e co

ntro

ller

Exte

rnal

com

man

d co

ntro

l

Cen

tral r

emot

e co

ntro

l

Inte

rlock

con

trol

•

DIII

-NET

com

mun

icat

ion

stan

dard

Two

sele

ctab

le

tem

pera

ture

-sen

sors

FBQ50/60/71/100/125/140D

BRC4C64A signal receiver must be added to the indoor unit.



Signal receiver unit (Separate type)



BRC1C61

*5

Long

-life

filte

r

•

Dra

in p

ump

mec

hani

sm

19 20

Remote controller

*3 *3 *3 *3 *4

Setp

oint

rang

e se

t

Wee

kly

sche

dule

tim

er

Setp

oint

aut

o re

set

Off

timer

(pro

gram

med

)

On/

Off

timer

Enhance comfort using cleverly placed ductsEnhance comfort using cleverly placed ducts




BRC1C61

Floor Standing Type

New airflow control for more comfortNew airflow control for more comfort

21 22

Quiet operation

Quick and easy installation and maintenance

Lightweight indoor unit

Easier connection with the centralised control system.

Enables smooth transport and installation of the indoor unit.

The grill will not open even upon impact.

Long-life filter lasts about 1year * maintenance not requiredEnergy saving

A DC fan motor improves efficiency.

* For dust concentration of 0.15 mg/ m3

Employs a safety lock function of suction grill.


Long

-life

filte

r

100C 125C 140CHigh

Indoor unit 50/60/71C

50 51 5343Middle 47 48 5141Low 44 46 4838

dB(A)

39 47

100C 125C 140C

Weight

Indoor unit 50/60/71C(kg)

FVQ50/60/71/100/125/140CNEW

• • •*2 *5 • *4 •• • • • • • • • • *4

CleanlinessComfort Remote controller Work & Servicing Control features Others

Features

*3

*1Applicable when BRC1E62 is used*2Applicable for FVQ50-100*3Applicable when wired remote controller is used *4For the outdoor units

*5Applicable when BRC1C61 is used

Switc

habl

e fa

n sp

eed

(3 s

tep)

•

Inde

pend

ent u

p-an

d-do

wn

airfl

ow

*1

Auto

airf

low

rate

Auto

sw

ing

Prog

ram

me

"Dry

"

Hig

h fa

n sp

eed

mod

e

On/

Off

timer

*1

Off

timer

(pro

gram

med

)

*1

Wee

kly

sche

dule

tim

er

*1

Setp

oint

rang

e se

t

*1*4

Setp

oint

aut

o re

set

Pre

char

ged

for

up to

30

m

Anti-

bact

eria

l air

filte

r

Filte

r sig

n

Emer

genc

y op

erat

ion

Self-

diag

nosi

s fu

nctio

n

Con

trol b

y 2

rem

ote

cont

rolle

rs

Auto

-rest

art

Anti

corro

sion

trea

ted

heat

exc

hang

ers

•

DIII

-NET

com

mun

icat

ion

stan

dard

*4

Low

gas

pre

ssur

e de

tect

ion

Gro

up c

ontro

l by

1 re

mot

e co

ntro

ller

Exte

rnal

com

man

d co

ntro

l

Cen

tral r

emot

e co

ntro

l

Inte

rlock

con

trol

Two

sele

ctab

le

tem

pera

ture

-sen

sors

Nig

ht q

uiet

ope

ratio

n

Comfortable fan speed control

To carry airflow to the far side of the room, airflow rate can be increased 5% or 10% depending on the installation condition or customer's request. (Field setting by remote controller.)

High fan speed mode


Programme "Dry"

(applicable for FVQ50-100)

Airflow rate is automatically controlled in accordance with the difference between room temperature and set temperature.

Auto airflow rate is selectable.

Example applications

When cooling

Turning louvers and upward and leaving and horizontal will reduce uneven room temperature.

New comfortable airflow control1) Left and right directions

2) Up and down directions Independent up-and-down airflow directions facilitate even room temperature and help save energy.

New unit

(by remote controller)

(by hand)

Freely select both up and down airflow direction with 8-louver (horizontal blade) operation.

Upper louver (1)Upper interlocking louvers (4)Lower interlocking louvers (2)Lower louver (1)

Each set of louvers to can be independently adjusted. (Manual adjustment)

Auto swing direction is selectable from 3 patterns to suit the layout of the room.

Pattern 1 Wide swing toward the front

When installed in the center of a wall. When installed in the corner of a room.

Pattern 2 Swing on the left side Pattern 3 Swing on the right side

Switchable fan speed: High/Middle/Low and Auto("Auto" is applicable when BRC1E62 is used.)


BRC1E62 can be

incorporated into the

main unit.

(Wired Remote Controller)

Navigation Remote Controller


BRC1E62

(Applicable when BRC1E62 is used.)

These two features work to reduce noise. Guides are added to the bell mouth intake to reduce turbulence in the airflow generated by fan suction. The Aero Spiral Fan features fan blades with the bent blade edges, further reducing turbulence.

Smooth Air Inlet Bell Mouth and Aero Spiral Fan

Escaping eddies are sucked in by the bent blade edges, reducing overall turbulence.

The high efficiency compressor to achieve a high COP

2

1

DC fan motorEfficiency improved in all areas compared to AC motors, especially at low speeds.

Sine wave DC inverter

>> Smooth sine wave DC inverter Use of an optimised sine wave smoothes motor rotation, further improving operating efficiency.

Sucked gas is compressed in the scrolling part before the heated motor, so that the machine compress the non-expanded gas, resulting in high efficiency compression.

>> The structural scrollEnergy savings is realised, eliminating the friction and the leakage of refrigerant gas.

>> Swing compressor

Compressor equiped with Reluctance DC motor

3

DC fan motor structure

With the bent blade edge

Without the bent blade edge

ReluctanceDC motor

Scroll section

Suction

Discharge Motor section

RZR50/60/71/100LVVM

Technology for energy efficiency

Swing bushing Refrigerant gas

Piston by incorporated blade and roller.

500 30 60 90 120

60

70

80

90

Small load Large loadLow capacity High capacity

Reluctance DC Motor

Conventional DC motor

More than 20%

AC motor

Rotational speed (rps)

Mot

or e

ffici

ency

(%)

Daikin DC Inverter models are equipped with the Reluctance DC motor for compressor. The Reluctance DC motor uses 2 different types of torque, neodymium magnet*1 and reluctance torque*2. This motor can save energy because it generates more power with a smaller electric power than an AC or conventional DC motor.

*1. A neodymium magnet is approximately 10 times stronger than a standard ferrite magnet.

*2. The torque created by the change in power between the iron and magnet parts.

Note: Data are based on studies conducted under controlled conditions at a Daikin laboratory.

RZR125/140LVVM, RZR100/125/140LUY1

(RZR100-140 only)

3

1

2

OUTDOOR UNIT

Compact Outdoor unit

Easy installation and maintenancePre charged for up to 30 metres

Long piping length

4-direction piping offers greaterlayout freedom

Separation available

If refrigerant piping length does not exceed 30 m, there is no need for on-site gas charging.

A pump-down switch is provided to make it easier to collect refrigerant if the unit is to be moved or layout modified.

Facilitates pump down (Refrigerant recovery function)

Effective gas monitoring reduces the labor required for operation, maintenance, and repairs.

Low gas pressure detection function

The maximum capacity is maintained within a set level of power consumption, which makes it possible to keep comfort and effective demand control.

As the bottom frame is subject to corrosion, corrosion-proof galvarium steel plate is adopted to enhance the durability.Heat exchange fins provided with anti-corrosion treatment

Durability

Through use of a V-cut propeller fan that imitates the efficiency of the swan, a migratory bird, airflow becomes smooth and loss is reduced.

Energy saving

ConstructionNon-treated fin

Anti corrosion treated heat exchangers

Aluminium

AluminiumCorrosion resistantacrylic resin

Hydrophilic film

Allowed refrigerant piping length and level difference

Note : 1Additional refrigerant charging is required if the refrigerant pipe is longer than the length.

Demand Control Function

8:00 12:00 16:00 20:00

Pow

er

cons

umpt

ion

Time

Limitation

* Required for KRP58M51 (Option)

Max. length

Max. leveldifference

Pre charged1

ALL model

30 m

50 m(Equivalent length 70m)

30 m

The outer panel for the piping connection part of the front, right side and backside can be removed and is easier for post-installation piping work.

*Pump-down function is available for pre-charged refrigerant amount.

(RZR100-140 only)

Night time quiet operation functionThe Automatic night quiet mode will initiate 8 hours after the peak temperature is reached in the daytime, and normal operation will resume 10 hours after that.

4849

RZR71LVVM48RZR50/60LVVM

Sound level1 (dB(A))

RZR100LVVM/LUY150RZR125LVVM/LUY150

4445

44

4546RZR140LVVM/LUY1

Rated2 Night Quiet Mode

Note : 1Anechoic chamber conversion value, measured according to JIS parameters and criteria. During operation these values are somewhat higher owing to ambient conditions. 2Value when cooling. Value will differ when heating. Note : 3In case of RZR100

Reducing noise will reduce capacity slightly.

100

50

0

8:00

Peak in outdoor temperature

8 hours

Rated

10 hours

Quiet modeQuiet mode

12:00 16:00 20:00 0:00 4:00 8:00

45

49

Cap

acity

(%)

Load

(%)

Ope

ratio

n So

und3 (d

B(A)

)

Comparison of outdoor unitsRZR100KU RZR100LV

Height 1,170 mm 990 mmWeight 92 kg 78 kg

990mm

Reduced installation work thanks to light, compact outdoor unit.

Compact and lightweight

RZR100LVRZR100KU

RZR50LVVM RZR60LVVM RZR71LVVM RZR100LVVM RZR125LVVM

Φ550V-cut propeller fan

Imitating the performance of the swan

(RZR50-71 only)

(RZR100-140 only)

23 24

Reduced by180 mm

Reduced by14 kg

RZR50LVVMRZR60LVVMRZR71LVVM RZR100LVVM

RZR100LUY1RZR125LUY1RZR140LUY1

RZR125LVVMRZR140LVVM

NEW

LCD REMOTE CONTROLLER Optional accessory

Enables temperature sensing closer to target area for improved comfort. (When using remote control from another room, temperature-sensor in indoor unit's air inlet must be selected.)

Facilitates maintenance and repairAll initial settings can be set from the remote controller. After interior construction is complete, ceiling mounted cassette type can be remotely set without having to use stepladder access for manual setting.Setting contents: High ceiling use, air direction, filter type, address for centralised control (group control address is set automatically).

Remote controller is equipped with model name and failure display functions. This facilitates service in the unlikely event of a malfunction.

SkyAir shares common control with Heat Reclaim Ventilator and the other Daikin air-conditioning units, thus simplifying interlocking operations.

Easily adaptable to large-scale, high-function, centralised remote control systems.Installing and connecting control wiring between SkyAir and other Daikin air-conditioning equipment is easy.

LCD panel shows operating status in letters, numbers, and motion.Airflow / swing display Displays auto-swing operating status and setting position of air discharge angle.

Preset temperature / operation mode display Displays preset room temperature and operating status (fan, dry, cool).

Programming time display Operation start and stop time can be set for individual timers up to 72 hours. The LCD also shows when it is time to clean the filter, when changeover is under centralised control, and ventilation/cleaning.

Self-diagnosis function Monitors operating status within the system covering 40 items, and displays a message to indicate as soon as a malfunction occurs.

CEILING MOUNTED CASSETTE TYPECOMPACT MULTI FLOW TYPE


CEILING SUSPENDED TYPE 35-125BV140CA

BRC7E531WBRC7F633F

BRC4C62DUCT CONNECTION MIDDLE and HIGH STATIC PRESSURE TYPE BRC4C64

BRC7EA66BRC7GA56

WALL MOUNTED TYPE BRC7EB519

Wired remote controller has built-in temperature-sensor (Applies to wired remote controllers (BRC1C61/1E62))

(Applies to wired remote controller (BRC1E62))

25 26

Clear Display

Navigation Remote Controller(Wired Remote Controller BRC1E62)

- 5 actions per day can be scheduled for each day of the week.- The holiday function will disable schedule timer for the days that have been set as holiday.- 3 independent schedules can be set. (e.g. summer, winter, mid-season)

Display is available in 11 languages.

Dot matrix display Backlight display

ConvenienceWeekly schedule Multilingual display

Easy-to-read LCD remote controller allows various system control configurations and can control multiple indoor units. Remote controller options are shown on the page introducing each indoor unit model.

NEW

(English, German, French, Spanish, Italian, Portuguese, Greek, Dutch, Russian, Turkish, and Polish).NEW

A combination of fine dots enables various icons.Large text display is easy to see.

This simple, modern designed remote controller with fresh white colour matches your interior design. Operation is much easier and smoother, just follow the indications on the navigation remote controller.

Energy savingNEW

- Sets and saves setting for an increment of time that automatically turns off air conditioner after a preset period of time for each time operation starts.- Period can be preset from 30 to 180 minutes in10-minute increments.

Off timer (programmed)

Setpoint range setNEW Setpoint auto reset

Restaurant sampleRestaurant opened

Temperature is set to 27ºC

27°C

- Saves energy by limiting the min. and max. set temperature.

- Avoids excessive heating or cooling.

- This function is convenient when the remote controller is installed at a place where any number of people may operate it.

- Even if the set temperature is changed, it returns to the preset temperature after apreset period of time.

- Period selectable from 30min/60min/90min/120min.

Full tables at lunchtimeThen is lowered to 24ºC for crowded room

24°C

After 30 minutes*Automatically returns to preset temperature (27ºC)

*Setting possible for after 30, 60, 90, and 120 minutes.

Returns to

27°Cautomatically

Signal receiver unit (For ceiling mounted cassette type)

Wireless remote controller for each indoor unit type

LCD wireless remote controller

Note: The signal receiver unit shown in the photograph is for mounting inside the decoration panel of the ceiling mounted cassette type.

Wireless remote controller

BRC7F633F

The wireless remote controller is supplied in a set with a signal receiver.Signal receiver unit is contained inside decoration panel or indoor unitShape of signal receiver unit differs according to the indoor unit.

The rubber switch and the oil-resistant plastic casing are adopted for durability.Only 17 mm thick. Can be installed either recessed or exposed.

Easy to read because of large LCD screen.Wired LCD remote controller

BRC1C61

LCD REMOTE CONTROLLER

Central remote controller

Interface adaptor for SkyAir series

Easily adaptable to large-scale, high-function, centralised remote control system.

Centralised control, with setting as simple as it is with a standardremote controller, of up to 64 groups (1,024 indoor units) is possible.

DCS302CA61 (Option)

DTA112BA51 (Option)

With its high functionality, the full colour “all-in-one” graphic controller facilitates management of SkyAir System in a variety of ways.

DCS601C51 (Option)

Unified on/off controller

Centralised control of on/off by group or all at once for up to 256 indoor units.

DCS301BA61 (Option)

Schedule timer

Unified control of weekly schedule for up to 1,024 indoor units.

DST301BA61 (Option)

Schedule timer sets on/off time in 1 minute units to be executed twice a day for a week at a time.

Simple system provides a diverse assortment of control modes.

Control by 1remote controller

Control pattern Wired remote controller Wireless remote controller

Control by 2remote controllers

Group control

Control by external command

Centralised remotecontrol

Interlock controlwith Heat Reclaim

Ventilator

(Basic system)

Link by remote controller group control.

Zone link control by centralised control.

For control from 2 locations such as in room and control room, exits, etc.

For simultaneous control of up to 16 indoor units.

Centralised control of up to 64 indoor groups from remote locationup to 1 kilometer away.

Control by 1 wireless remote controller and 1 wired remotecontroller (See note 2, 3)Signal receiver unit installed on indoor unit

Signal receiver unit installed on indoor unit

Heat Reclaim Ventilator for indoor units within a zone are operated by interlocking Can also be operated independently by remote controller.

Central remote controller (option)

Heat ReclaimVentilator

Can be operated simultaneously or independently by remote controller (set by ventilation mode)



Non-polar, double-core (max. wiring length 500 m)

Connects 2 wired remote controllers (See note 1)

Automatic address setting function Automatic address setting functionSignal receiver unit installed on 1 indoor unit

Optional wiring adaptor for electrical appendices is necessary


Can be operated simultaneously by remote controller (set by ventilation mode)


Heat Reclaim Ventilator for indoor units within a zone are operated by interlocking



Operation and surveillance is carried out using the contact signal from the operation control box in the building surveillance (security) room.

Optional wiring adaptor for electrical appendices is necessary

Interface adapter for SkyAir series (option) is required (See note 4)

Interface adapter for SkyAir series (option) is required (See note 4)

Note: 1BRC1E62 can connect to BRC1E62 only. 2It is not possible to use two wireless remote controllers. 3BRC1E62 cannot connect to wireless remote controller. 4The ceiling mounted cassette type <Round Flow>, ceiling suspended type (140CA only), wall mounted type, duct connection middle and high static pressure type, and floor standing type come standard with an interface adaptor for SkyAir series.

Enables centralised control via connection to a high-speed, DIII-NET communication system, adopted for the Daikin VRV system.Necessary for interface adaptor for SkyAir series with the central remote control units shown at above.

The interface adaptor for the SkyAir series is optional except for the ceiling mounted cassette type <Round Flow>, ceiling suspended type (140CA only), wall mounted type, duct connection middle and high static pressure type, and floor standing type.

Simultaneous operation system

27 28

Twin Multi for comfort and economyLower installation cost than individual pair typeReduced outdoor unit installation spaceDistributed indoor units enhance comfort

Piping guidelineOutdoor unit

Max. piping length

One-way max. piping length(longest length of liquid piping or gas piping)

Max. branch piping lengthMax. difference of branch piping lengthMax. level difference between indoor units

Max. level difference between outdoor unit and indoor units

RZR125/140LVVMRZR125/140LUY1

Refrigerant branch piping kit for Twin Multi operation (option)

KHRP58P216T

2 sets of Twin Multi

For example, four indoor units are judiciously

spaced in this wide single-floor restaurant to deliver comfortable

currents of air to every corner of the room.

Twin Multi operation

Four new types of Multi series indoor units are now available!Four new types of Multi series indoor units are now available!

Branch piping kit

Branch piping kit

Branch piping kit

Main piping

Branch piping

L1

L2

L0

H

H1

Branch piping

Indoor unit

Indoor unit

Outdoor unit

Page 39

L0 L1 L2 60 m

L0 L1 50 m(In case of L1 L2)

L1, L2 20 m

L1 L2 10 m(In case of L1 L2)

H1 0.5 m

H 30 m

Branch piping kit

Page 31specificationsFCQ60/71LUV1 X2

Page 35specificationsFBQ60/71DV1 X2

Page 33specifications

FHQ60BVV1G X2FHQ71BVV1B X2

Page 36specifications

FVQ60CVE X2FVQ71CVEB X2

If there is a malfunction elsewhere in the system, the fan or compressor can still be operated.

Insufficient gas charging is normally hard to detect. During post-installation trials and regular inspection procedures, the refrigerant level is monitored by microprocessor to maintain proper gas pressure. Reliability is assured and maintenance and inspection can be carried out more quickly.

You can turn up to 16 indoor units on/off with a single remote controller. (When using connected indoor units, the settings must all be the same and on/off will be simultaneous.)

Note: Some features only available on selected models. See model pages for full list of features applicable to each unit.

Emergency operation


Group control by 1 remote controller

Operation and surveillance is carried out using the contact signal from the operation control box in the building surveillance (security) room.

External command control

Optional central remote controller enables centralised control of up to 1024 indoor units (64 groups) from up to 1 kilometer away.

Central remote control

Enables interlocking control with external equipment such as Heat Reclaim Ventilator.

Interlock control

The operating parameters of indoor and outdoor units, and sensor data at critical locations throughout the system, are constantly monitored using a microcomputer. To facilitate quick response in the event of a malfunction, a message appears on the LCD of the remote controller and an LED on the unit illuminates.

Self diagnosis function

Two types are available: 65% and 90% colorimetry. High-efficiency filter unit

You can provide air-conditioning with fresh air from outside. Convenient for places where a ventilation fan cannot be installed.

Fresh-air intake kit

Work and Servicing

Control features

Options

Steeper gradient realises more efficient condensate drainage. High-lift is especially useful for long lengths of drain piping.

Maintenance is not required for one year (two years when a ceiling mounted cassette type is used).

If refrigerant piping length does not exceed 30 m, there is no need for on-site gas charging.

The filter sign warns you when it is time to clean the filter. *When using a wired remote controller the sign is displayed in the LCD. When using a wireless remote controller the filter sign lamp illuminates on the signal receiver unit.

Drain pump mechanism

Long-life filter

Pre charged for up to 30 metres

Filter sign

Daikin's innovative air discharge mechanism keeps airflow away from the ceiling. Ceiling cleaning is less frequently required.

Ceiling soiling prevention function

If there is a power outage while the equipment is operating, operations will restart in the same mode as before the power cut when electricity is restored.

Ultra long-life filter

Auto-restart

Using 2 remote controllers you can operate the equipment locally or from a remote location.Note: When a wireless remote controller is used, remote control by two remote controllers is not possible.

Control by 2 remote controllers

RXS50FA/60F/71F,RKS25A/35A : 10 m*Applicable to RZR50-140.

Requires no maintenance for about 4 years* (10,000h) in stores and offices.*For dust concentration of 0.15 mg/m3

*Required for KRP58M51 (Option)

*Connecting ducts, insect nets, fire dampers, air filters, and other parts should, as required, be procured locally.

**Outside Air fan interlocked with air conditioning unit is necessary. Optional PCB(KRP1C63)is required for interlocking.

***It is recommended that the volume of outdoor air introduced through the kit is limited to 10% of the maximum airflow rate of the indoor unit. Introducing higher quantities will increase the operating noise and may also influence temperature sending.

Note:

Others

To achieve increased durability by improved resistance to salt corrosion and atmospheric pollution, coated Anti corrosion treated heat exchangers (with special acryl pretreatment) are used for the heat exchanger of the outdoor unit.In high corrosive areas, regular maintenance needs to be carried out.

Anti corrosion treated heat exchangers

Standardly equipped interface enables connection to centralised control system without need of an adaptor.

DIII-NET communication standard

29 30

Abundance of functions that provide comfortable air-conditioning in stores and offices. Note: Some features only available on selected models. See model pages for full list of features applicable to each unit.

Mould-proof drain pan prevents growth of mould in highly humid conditions.

Mould-proof drain pan

Cleanliness


Silver ion anti-bacterial drain panThe Air filter has a anti-bacterial treatment to help prevent the growth of bacteria and mould on it.

Anti-bacterial air filter

Sanitary filter has mould-resistant treatment.Mould-proof air filter

Note: Wireless remote controllers have no temperature-sensor.

Use the temperature-sensor in the indoor unit when controlling air conditioning from another room.

Dehumidification is microprocessor controlled to prevent abrupt and uncomfortable changes in air temperature. Useful for reducing uncomfortable humidity without uncomfortable cooling of the room.

Delivers comfortable air-conditioning to all areas, near to and far from the air-conditioner.

High setting provides maximum reach while low setting minimises drafts.

Auto-swing Programme "Dry"

Switchable fan speed

(1) Air direction in standard setting

(2) Air direction in ceilingsoiling prevention setting

(standard, ceiling soiling prevention)

Note:When units are installed on high ceilings, depending on the model, various restrictions concerning maximum height, air discharge direction, and choice of options may apply.

You can freely set 2 air discharge setting by remote controller.

Swing pattern selectionDelivers air-conditioning comfort all the way down to the floor in air-conditioning zones with high ceilings.

High-ceiling application

Airflow rate is automatically controlled in accordance with the difference between room temperature and set temperature.

Auto airflow rate


Comfort

The air flow direction can be fixed at your desited angle by the remote controller.

Temperature-sensors are included in the indoor unit and optional wired remote controller. Temperature sensing closer to target area is possible to further increase the comfort level.

Remote Controller

Sets and saves setting for an increment of time that automatically turns off air conditioner after a preset period of time for each time operation starts.

Off timer (programmed)

Operation starts when the preset time of the ON timer elapses and stops when the preset time of the OFF timer elapses.

On/Off timer

Up to five operation ON/OFF settings can be programmed per day for each day of the week. Not only can the time be set for the operation ON setting, but also the temperature.

Weekly schedule timer

Even if the set temperature is changed, it returns to the preset temperature after a preset period of time.

Saves energy by limiting the minimum and maximum set temperatures. Avoids excessive heating and cooling.

Setpoint auto reset

Setpoint range set

Applicable for wall mounted typeYou can increase fan speed approximately 10% higher than the "high" setting.

High fan speed mode The Automatic night quiet mode will initiate 8 hours after the peak temperature is reached in the daytime, and normal operation will resume 10 hours after that.

Night quiet operation

Independently adjust (manually) the eight horizontal blade louvers in both up and down directions to achieve an airflow that reduces uneven room temperature.

Independent up-and-down airflow


SPECIFICATIONS

W/WCOP

35

1 Phase, 220–240 V, 50 Hz

37/32195X960X680

24

3.4 (1.2-3.7)

1.053.24

White

VP20 (I.Do/ 20XO.Do/ 26)

10 to 46o/ 6.4

47550X765X285

34

1.0 (Charged for 10 m)0.6

Ivory white

2015

Hermetically sealed swing type

o/ 9.5

o/ 18.0 (Hole)

°CWB

kW

kWPower consumption

°CDBCertified operation range

Certified operation range

Motor outputCompressor

ModelName

Indoor unit

Outdoor unit

Dimensions (HXWXD)

Colour

mmdB(A)

kWRefrigerant charge (R-410A) kg

dB(A)Sound level2Dimensions (HXWXD) mmMachine weight kg

Piping connections

mmLiquid (Flare)mmGas (Flare)mmDrain Indoor unit

Cooling1

Outdoor unit

Machine weight kg

Airflow rate (H/L) m3/min 13/10458/353

Outdoorunit

Colour

mm

Heat insulation

Max. interunit piping length mmMax. installation level difference

Power supply

Type

Sound level (H/L)2

Indoorunit

FHQ35BVV1B

RKS35AVMG

Both liquid and gas piping

Cooling capacity1

Rated (Min. - Max.)

cfm

14 to 23

31 32

Note : 1Rated cooling capacities are based on the following conditions: Indoor temp., 27°CDB, 19.0°CWB; outdoor temp. 35°CDB, 24°CWB. Equiv. refrigeration piping, 7.5 m (horizontal).2Anechoic chamber conversion value, measured according to JIS parameters and criteria. During operation these values are somewhat higher owing to ambient conditions.

Note : 1Rated cooling capacities are based on the following conditions: Indoor temp., 27°CDB, 19.0°CWB; outdoor temp. 35°CDB, 24°CWB. Equiv. refrigeration piping, 7.5 m (horizontal).2Anechoic chamber conversion value, measured according to JIS parameters and criteria. During operation these values are somewhat higher owing to ambient conditions.

cfm

25 35

286X575X575

1 Phase, 220–240 V, 50 Hz2.5

(1.2-3.0)3.4

(1.2-3.7)0.73 1.103.42 3.09

55X700X700

2.7

VP20 (I.Do/ 20XO.Do/ 26)

17.5

29.5/24.5 32/25

10 to 46

46 47550X765X285

34

1.00.6

Ivory white 14 to 23


o/ 6.4o/ 9.5

2015


o/ 18.0 (Hole)

White

(Charged for 10 m)Sound level2

FFQ25BV1B

RKS25AVMG

FFQ35BV1B

RKS35AVMG

kWPower consumption

°CDB

°CWBCertified operation range



ModelName

Indoorunit

Indoor unit

Outdoor unit

Dimensions(HXWXD)

Colour

mmmm

Sound level (H/L)2 dB(A)

kWRefrigerant charge (R-410A)

dB(A)Dimensions (HXWXD) mmMachine weight kg

Unit

Piping connections


Outdoor unit

Decoration panel

UnitDecoration panel

Machine weightkgkg

kg


Airflow rate (H/L) 9/6.5 10/6.5317/229 353/229

m3/min

Outdoorunit

Colour

mm

Heat insulation


Power supply

Type

kW


----------

Cooling capacity1

Rated (Min. - Max.)

Cooling1

W/WCOP

Outdoor unit

Outdoor unit

Note : 1Rated cooling capacities are based on the following conditions: Indoor temp., 27°CDB, 19.0°CWB; outdoor temp. 35°CDB, 24°CWB. Equiv. refrigeration piping, 7.5 m (horizontal).2Capacities are net, including a deduction for cooling for indoor fan motor heat.3Anechoic chamber conversion value, measured according to JIS parameters and criteria. During operation these values are somewhat higher owing to ambient conditions.

dB(A)


Twin Multi

Cooling capacity1,2

Rated (Min. - Max.) kW

°CDBCoolingCertified Operation range

Sound level3

°CWBCoolingCertified Operation range


ModelName

Indoor unit

Outdoor unit

Dimensions(HXWXD)

Colour

mmmm

dB(A)


dB(A)

Dimensions (HXWXD) mmMachine weight kg

Unit

Piping connections


Outdoor unit

Decoration panel


Machine weight kg

kgUnitDecoration panel

Airflow rate (H/L) m3/mincfm

Outdoorunit

Colour

mm

Heat insulation


Power supply

Type

Cooling

Sound level (H/L)3

Indoorunit

71FCQ71LUV1

RZR71LVVM

Hermetically sealed swing type1.76

7.1 (3.2-8.0)

100FCQ100LUV1

RZR100LVVM

43/32

49

990X940X32078

2.032.7

(Charged for 30 m)

32/20

10.0 (5.0-11.2)

125FCQ125LUV1

RZR125LVVM

44/34

o/ 9.5o/ 15.9

50

1,170X900X32097

24

298X840X84050X950X950

5.5

----------

1 Phase, 220–240 V, 50 Hz 3 Phase, 380–415 V, 50 Hz

30

Ivory white

Fresh white


50 (Equivalent length 70)

Hermetically sealed scroll type

o/ 26.0 (Hole)

2.43.15

(Charged for 30 m)

VP25 (I.Do/ 25XO.Do/ 32)

33/22.51,130/706 1,165/794

12.5 (5.7-14.0)

140FCQ140LUV1

RZR140LVVM

44/36

21 to 46

14 to 25

3.1

14.0 (6.2-15.4)

kWPower consumption Cooling1

100FCQ100LUV1

RZR100LUY1

43/32

92

1.82.7

(Charged for 30 m)

32/20

10.0 (5.0-11.2)

125FCQ125LUV1

RZR125LUY1

44/34

97

2.43.7

(Charged for 30 m)

33/22.51,130/706 1,165/794

12.5 (5.7-14.0)

140FCQ140LUV1

RZR140LUY1

44/36

49 50

3.1

14.0 (6.2-15.4)

1.99 2.78 3.68 4.91 2.78 3.68 4.91

Night quiet mode

50FCQ50LUV1

RZR50LVVM

1.12

5.0 (2.3-5.6)

60FCQ60LUV1

RZR60LVVM

35/28

48

595X845X30043

21

256X840X840

1.351.6

(Charged for 30 m)

21/13.5741/477

6.0 (2.6-6.3)

1.03 1.40W/WCOP 3.57 3.60 3.40 2.85 3.60 3.40 2.854.87 4.30

45 46464544

dB(A)

Cooling capacity1,2


°CDBCoolingCertified Operation range

Sound level3

°CWBCoolingCertified Operation range


ModelName

Indoor unit

Outdoor unitOutdoor unit

Dimensions(HXWXD)

Colour

mmmm

dB(A)


dB(A)


Unit

Piping connections


Outdoor unit

Decoration panel


Machine weight kg

kgUnitDecoration panel

Airflow rate (H/L) m3/mincfm

Outdoorunit

Colour

mm

Heat insulation


Power supply

Type

Cooling

Sound level (H/L)3

Indoorunit

o/ 9.5o/ 15.9

50

1,170X900X32097

256X840X84050X950X950

5.5

----------

3 Phase, 380–415 V, 50 Hz1 Phase, 220–240 V, 50 Hz

30

Ivory white

Fresh white




o/ 26.0 (Hole)

3.7 (Charged for 30 m)

VP25 (I.Do/ 25XO.Do/ 32)

21 to 46

14 to 25

kWPower consumption Cooling1

125FCQ60LUV1x2

RZR125LUY1

35/28

2.4

21/13.5741/477

12.5 (5.7-14.0)

140FCQ71LUV1x2

RZR140LUY1

3.1

14.0 (6.2-15.4)

3.68 4.91

Night quiet mode

21

W/WCOP 3.40 2.85

45 46


125FCQ60LUV1x2

RZR125LVVM

2.4

12.5 (5.7-14.0)

140FCQ71LUV1x2

RZR140LVVM

3.1

14.0 (6.2-15.4)

3.68 4.913.40 2.85

45 46

Outdoor unit

°CWB

Cooling capacity1,2


kWPower consumption

°CDBCertified Operation range

Certified Operation range

Sound level3


ModelName

Indoor unit

Dimensions (HXWXD)

Colour

mmdB(A)


dB(A)Dimensions (HXWXD) mmMachine weight kg

Piping connections


Outdoor unit

Machine weight kg

Airflow rate (H/M/L)

Outdoorunit

Colour

mm

Heat insulation


Power supply

Type

Cooling1

Cooling

Sound level (H/M/L)3

Indoorunit


Note : 1Rated cooling capacities are based on the following conditions: Indoor temp., 27°CDB, 19.0°CWB; outdoor temp. 35°CDB, 24°CWB. Equiv. refrigeration piping, 7.5 m (horizontal).2Initial setting is standard.3Anechoic chamber conversion value, measured according to JIS parameters and criteria. During operation these values are somewhat higher owing to ambient conditions.

WALL MOUNTED TYPE

m3/min

100FAQ100CVEA

RZR100LVVM

100FAQ100CVEA

RZR100LUY1

49/45/41

17340X1,200X240

o/ 9.5

49

Ivory white

30Both liquid and gas piping

Fresh white

o/ 15.9

Hermetically sealed swing type Hermetically sealed scroll type

o/ 26.0 (Hole)

1.6 (Charged for 30 m) 3.35 (Charged for 30 m) 2.7 (Charged for 30 m)

10.0(5.0-11.2)

26/23/19

21 to 46

50 (Equivalent length 70m)

14 to 25

71FAQ71CVEA

RZR71LVVM

7.1(3.2-8.0)

45/42/40

48900X940X320595X845X300

781,170X900X320

9243

2.03 2.11.76

290X1,050X23813

VP13 (O.Do/ 18 X I.Do/ 13)

18/16/14cfm 918/812/671635/565/494

2.19 3.37W/WCOP 3.24 2.97 2.38

4.20

1 Phase, 220–240 V, 50 Hz 3 Phase, 380–415 V, 50 HzOutdoor unitOutdoor unit

Refrigerant charge (R-410A)

Refrigerant charge (R-410A)

33 34

SPECIFICATIONS

1 Phase, 220–240 V, 50 HzPower supply

6050 71CEILING MOUNTED BUILT-IN TYPE

ModelName

Indoor unit


kW

FBQ50BV1A

RXS50FAVMA

FBQ60BV1A

RXS60FVMA

FBQ71BV1A

RXS71FVMA

5.0 (1.7-5.6)

°CDBCooling

°CWBCooling

Cooling

Cooling




Indoorunit

Dimensions (HXWXD)

Colour

mmdB(A)

kWRefrigerant charge (R-410A)Sound level3

Cooling (H/L)Sound level3

dB(A)


Piping connections

mmLiquidmmGasmmDrain Indoor unit

Machine weight kg

kg

Airflow rate(H/L)

Fan

Outdoorunit

Colour

Heat insulation


Type

300X700X80034

33/29

47

735X825X300 770X900X32048

----------

o/ 12.7o/ 6.4

o/ 15.9

10 to 46

3020


VP25 (I.Do/ 25XO.Do/ 32)mmOutdoor unit

Ivory white Hermetically sealed swing type

1.11.5 (Charged for 10 m)

kWCooling1Power consumption 1.98

5.7 (1.7-7.0)

300X1000X800

Pa 88-49-20 2

4114 to 25

34/30

49

2.23

6.7 (2.3-8.0)

cfm 459/318 636/459

52Night quiet mode dB(A) ----------

71

1.922.3 (Charged for 10 m)

2.57

External static pressure(High-Standard-Low)

o/ 18.0 (Hole) o/ 26.0 (Hole)

Cooling capacity1

Rated (Min. - Max.)

m3/min 13/9 18/13

W/WCOP 2.56 2.612.53

VP20 (I.Do/ 20XO.Do/ 26)


30

100FHQ100BVV1B

RZR100LVVM

42/-/37195X1,400X680

o/ 9.5o/ 15.9

990X940X32078

32

49

24/-/20847/-/706

10.0 (5.0-11.2)

o/ 26.0 (Hole)

2.032.7

(Charged for 30 m)

3.51

60FHQ60BVV1G

RZR60LVVM

6.0 (2.6-6.3)

39/-/35195X1,160X680

595X845X30043

27

48

17/-/14600/-/494

1.351.6

(Charged for 30 m)

1.69


3 Phase, 380–415 V, 50 Hz

Ivory white °CWB

kW

kWPower consumption



Motor output

CoolingNight quiet mode

Compressor

ModelName

Indoor unit

Outdoor unit

Dimensions (HXWXD)

Colour

mmdB(A)


kg

dB(A)dB(A)

Sound level3


Piping connections


Outdoor unit

Machine weight kg

Airflow rate (H/M/L) m3/min

Outdoorunit

Colour

mm

Heat insulation


Power supply

Type

Sound level (H/M/L)3

Indoorunit


Cooling capacity1,2

Rated (Min. - Max.)

cfm

125100FHQ100BVV1B FHQ125BVV1B

RZR100LUY1 RZR125LUY1

42/-/37 44/-/39195X1,400X680 195X1,590X680

92 97

32 35


49 50

24/-/20 30/-/25847/-/706 1,059/-/883

10.0 (5.0-11.2)

12.5 (5.7-14.0)

2.1 2.62.7

(Charged for 30 m)3.7

(Charged for 30 m)

50FHQ50BVV1G

RZR50LVVM

5.0(2.3-5.6)

45 4544

1.12

1.39

White White

3.51 4.55

21 to 46

14 to 25

125FHQ125BVV1B

RZR125LVVM

44/-/39195X1,590X680

1,170X900X32097

35

50

30/-/251,059/-/883

12.5 (5.7-14.0)

2.63.15

(Charged for 30 m)

4.55

1 Phase, 220–240 V, 50 Hz


71FHQ71BVV1B

RZR71LVVM

1.76

2.502.853.56W/WCOP 3.60 2.85 2.752.752.84

7.1 (3.2-8.0)

Cooling1

Outdoor unit

140FHQ140CAVEB

RZR140LVVM

46/42/38

34/29/241,200/1,024/847

13.3 (6.2-15.4)

3.1

46

Fresh white

4.68

235X1,590X69038

2.84


VP20 (I.Do/ 20XO.Do/ 26)

30

o/ 9.5o/ 15.9

o/ 26.0 (Hole)

Ivory white °CWB

kW

kWPower consumption



Motor output

CoolingNight quiet mode

Compressor

ModelName

Indoor unit


Dimensions (HXWXD)

Colour

mmdB(A)


kg

dB(A)dB(A)

Sound level3


Piping connections


Outdoor unit

Machine weight kg

Airflow rate (H/L) m3/min

Outdoorunit

Colour

mm

Heat insulation


Power supply

Type

Sound level (H/L)3

Indoorunit


Cooling capacity1,2

Rated (Min. - Max.)

cfm

140FHQ71BVV1Bx2

RZR140LUY1


13.3 (6.2-15.4)

2.9

45 4645 46

White

5.32

21 to 46

14 to 25

125FHQ60BVV1Gx2

RZR125LUY1

39/35195X1,160X680

1,170X900X32097

27

50

17/14600/494

12.5 (5.7-14.0)

2.63.7

(Charged for 30 m)

3.12.43.15

(Charged for 30 m)

4.55


W/WCOP 2.502.75

1 Phase, 220–240 V, 50 Hz 3 Phase, 380–415 V, 50 Hz

140FHQ71BVV1Bx2

RZR140LVVM

13.3 (6.2-15.4)

5.32

125FHQ60BVV1Gx2

RZR125LVVM

12.5 (5.7-14.0)

4.552.502.75

Cooling1

Twin Multi

35 36

SPECIFICATIONS

FLOOR STANDING TYPE

Power supply 1 Phase, 220–240 V, 50 Hz/220–230 V, 60 Hz 3 Phase, 380–415 V, 50 Hz

Note : 1Rated cooling capacities are based on the following conditions: Suction temp., 27°CDB, 19.0°CWB; outdoor temp. 35°CDB, 24°CWB. Equiv. refrigeration piping, 7.5 m (horizontal)2Capacities are net, including a deduction for cooling for indoor fan motor heat.3Anechoic chamber conversion value, measured according to JIS parameters and criteria. During operation these values are somewhat higher owing to ambient conditions.

ModelName

Indoor unit


kW

°CDBCooling

°CWBCooling

Cooling

Cooling




Indoorunit

Dimensions (HXWXD)

Colour

mmdB(A)


Cooling (H/M/L)Sound level3

dB(A)


Piping connections


Machine weight kg

kg

Airflow rate(H/M/L)

Fan

Outdoorunit

Colour

Heat insulation


Type

Fresh white


mmOutdoor unit

Ivory white

kWCooling1Power consumption

cfm

Night quiet mode dB(A)

Cooling capacity1,2

Rated (Min. - Max.)

30

21 to 46

14 to 25

m3/min


VP20 (I.Do/ 20XO.Do/ 26)

o/ 9.5o/ 15.9

o/ 26.0 (Hole)

1,850X600X27039

595X845X30043



635/565/49418/16/14

43/41/38

48

71FVQ71CVEB

RZR71LVVM

60FVQ60CVE

RZR60LVVM

50FVQ50CVE

RZR50LVVM

7.1 (3.2-8.0)

1.761.351.12

2.58

3.1 2.3 2.8 3.4

140FVQ140CVEB

RZR140LVVM

13.5(6.2-15.4)

5.40

45 4644

100FVQ100CVEB

RZR100LVVM

990X940X320

10.0 (5.0-11.2)

78

2.032.7

(Charged for 30 m)

988/883/77728/25/22

988/918/84728/26/24

1,059/988/91830/28/26

3.28

50/47/44

49

125FVQ125CVEB

RZR125LVVM

140FVQ140CVEB

RZR140LUY1

100FVQ100CVEB

RZR100LUY1

125FVQ125CVEB

RZR125LUY1

12.5 (5.7-14.0)

1,850X600X35047

2.43.15



(Charged for 30 m)

4.39

53/51/4851/48/46988/883/777

28/25/22988/918/847

28/26/241,059/988/918

30/28/26

50/47/44 53/51/4851/48/46

1,170X900X32097

5045 46

92

49

97

50

W/WCOP 2.75

6.0 (2.6-6.3)

1.843.26

5.0 (2.3-5,6)

1.273.94 2.503.05 2.85

13.5(6.2-15.4)

5.40

10.0 (5.0-11.2)

3.28

12.5 (5.7-14.0)

4.392.503.05 2.85


Power supply 1 Phase, 220–240 V, 50 Hz/220–230 V, 60 Hz 3 Phase, 380–415 V, 50 Hz

ModelName

Indoor unit


kW

°CDBCooling

°CWBCooling

Cooling

Cooling




Indoorunit

Dimensions (HXWXD)

Colour

mmdB(A)


Cooling (H/M/L)Sound level3

dB(A)


Piping connections


Machine weight kg

kg

Airflow rate(H/M/L)

Fan

Outdoorunit

Colour

Heat insulation


Type

Fresh white


mmOutdoor unit

Ivory white


cfm


Cooling capacity1,2

Rated (Min. - Max.)

30

21 to 46

14 to 25

m3/min


VP20 (I.Do/ 20XO.Do/ 26)

o/ 9.5o/ 15.9

o/ 26.0 (Hole)

3.7(Charged for 30 m)

1,170X900X320

50

635/565/49418/16/14

45

125FVQ60CVEx2

RZR125LUY1

12.5 (5.7-14.0)

97

2.8

4.39

43/41/381,850X600X270

39

140FVQ71CVEBx2

RZR140LUY1

125FVQ60CVEx2

RZR125LVVM

140FVQ71CVEBx2

RZR140LVVM

13.5(6.2-15.4)

5.40W/WCOP 2.85 2.50

12.5 (5.7-14.0)

4.39

13.5(6.2-15.4)

5.402.85 2.50

3.4

46

3.15(Charged for 30 m)

45

2.4 3.1

46


Power supply 1 Phase, 220–240 V, 50 Hz1 Phase, 220–240 V, 50 Hz


ModelName

Indoor unit

Outdoor unitIndoor unitOutdoor unit

kW

°CDBCooling

°CWBCooling

Cooling

Cooling




Indoorunit

Dimensions (HXWXD)Air filter

Colour

mm

dB(A)



dB(A)


Piping connections


Machine weight kg

kg

Airflow rate(H/L)

Fan

Outdoorunit

Colour

Heat insulation


Type

----------


mmOutdoor unit

Ivory white


Pa

cfm


External static pressure(Middle-High)

Cooling capacity1,2

Rated (Min. - Max.)

30

21 to 46

14 to 25

m3/min

50FBQ50DV1

RZR50LVVM

5.0 (2.3-5.6)


VP25 (I.Do/ 25XO.Do/ 32)

o/ 9.5o/ 15.9

o/ 26.0 (Hole)

1.12

1.39

60FBQ60DV1

RZR60LVVM

6.0(2.6-6.3)

300X1,000X700---------- 5

36

595X845X30043

Hermetically sealed swing type1.351.6

(Charged for 30 m)

635/53018/15

1.69

37/32

48

71FBQ71DV1

RZR71LVVM

7.1 (3.2-8.0)

1.76

2.22

2.9

140FBQ140DV1

RZR140LVVM

14.0(6.2-15.4)

4.71

45 4644

50-200 3

100FBQ100DV1

RZR100LVVM

990X940X320

10.0 (5.0-11.2)

78

2.032.7

(Charged for 30 m)

1,130/81232/23

2.82

38/33

49

125FBQ125DV1

RZR125LVVM

12.5 (5.7-14.0)

300X1,400X70046

1,377/988

2.43.15

(Charged for 30 m)

39/28

3.73

40/36

1,170X900X32097

50

100FBQ100DV1

RZR100LUY1

10.0 (5.0-11.2)

1,130/812

92

1.82.7

(Charged for 30 m)

32/23

2.82

38/33

4945

3 Phase, 380–415 V, 50 Hz

125FBQ125DV1

RZR125LUY1

12.5 (5.7-14.0)

97

2.43.7

(Charged for 30 m)

1,377/98839/28

3.73

40/36

50

140FBQ140DV1

RZR140LUY1

14.0(6.2-15.4)

4.71W/WCOP 3.60 3.56 3.20 2.973.55 3.35 3.55 3.35 2.97

2.9

46


Note : 1Rated cooling capacities are based on the following conditions: Suction temp., 27°CDB, 19.0°CWB; outdoor temp. 35°CDB, 24°CWB. Equiv. refrigeration piping, 7.5 m (horizontal)2Capacities are net, including a deduction for cooling for indoor fan motor heat.3Initial setting is standard.4Anechoic chamber conversion value, measured according to JIS parameters and criteria. During operation these values are somewhat higher owing to ambient conditions.5Air filter is not standard accessory, but please mount it in the duct system of the suction side. Select its dust collection efficiency(gravity method) 50% or more.

Power supply 1 Phase, 220–240 V, 50 Hz1 Phase, 220–240 V, 50 Hz 3 Phase, 380–415 V, 50 Hz

ModelName

Indoor unit

Outdoor unitIndoor unitOutdoor unit

kW

°CDBCooling

°CWBCooling

Cooling

Cooling




Indoorunit

Dimensions (HXWXD)Air filter

Colour

mm

dB(A)



dB(A)


Piping connections


Machine weight kg

kg

Airflow rate(H/L)

Fan

Outdoorunit

Colour

Heat insulation


Type

----------


mmOutdoor unit

Ivory white


Pa

cfm


External static pressure(Middle-High)

Cooling capacity1,2

Rated (Min. - Max.)

30

21 to 46

14 to 25

m3/min


VP25 (I.Do/ 25XO.Do/ 32)

o/ 9.5o/ 15.9

o/ 26.0 (Hole)

---------- 5

50-200 3


1,170X900X32097

5045

125FBQ60DV1x2

RZR125LUY1

12.5 (5.7-14.0)

2.4

635/53018/15

3.73

37/32

300X1,000X70036

140FBQ71DV1x2

RZR140LUY1

125FBQ60DV1x2

RZR125LVVM

140FBQ71DV1x2

RZR140LVVM

14.0(6.2-15.4)

4.71W/WCOP 3.35 2.97

12.5 (5.7-14.0)

3.73

14.0(6.2-15.4)

4.713.35 2.97

2.9

46


5045

2.4 2.9

46


Twin Multi

Twin Multi

Indoor unit

For each flow pattern – all round, 4-way, 3-way, 2-way, branch duct connection – the compatibility of each independently installed option (shown in the column on the left) to accessory options (listed across the top of each table) is shown in the cells where the relevant row and column intersect.A circle (o) indicates compatibility, and a cross (x) indicates incompatibility. Any options not shown below are not suitable for independent or accessory installation.

Round flow type: List of optional parts required to achieve different flow patterns

1In some cases, depending on how the unit is embedded in the ceiling, use of branch ducts and fresh air intake kits may not be possible. Before starting installation work make sure to check whether or not joint installation is possible. In particular, ensure that the lower fixing position caused by the addition of panel spacers is acceptable.

2Use a chamber connection kit if two different types of optional chamber are used together. In this case, the fresh air intake kit must be installed in the upper position.3It is not possible to use panel spacers in a 2-way flow installation. 4It is not possible to install a branch duct on the same side to which a fresh air intake kit (direct mount) is installed.

Panel/grille relatedIndependently installable optional parts

Operation control relatedAuxillary function related

Filter related

Optional accessory parts

Independently installable optional partsOptional accessory parts

Independently installable optional partsOptional accessory parts

Panel spacer1

Panel spacer1 o o ox oWireless remote controller o o oo o

Fresh air intake kit (direct mount) o o oo ox o o

xx

High-efficiency filter2

Filter related Ultra-long-life filter2

o o ox

xUltra-long-life filter2 o o o xx

High-humidity operation kit

Panel/grille relatedOperation control relatedAuxillary function related

Panel spacer1


Fresh air intake kit (direct mount)High-humidity operation kit

All round flow 4-way flow

o3 o3 xx o3

o3 o

x

xxo o

o3 o xx

o ox o o x

o3 o o xx

3-way flow 2-way flow

1-way branch / unit 3-way flowBranch duct1(Chamber type)(Round duct type)

o o o4 xx o2-way branch / unit 2-way flow1-way branch / unit 2-way flow

x o o4 xx ox o o4 xx o

Branch duct connection


Fresh air intake kit (direct mount)



Ultra-long-life filter2

Panel spacer1 Wireless remote controller





Panel spacer1 Wireless remote controller


Fresh air intake kit (Chamber type)1,2 o o ox o

Fresh air intake kit (Chamber type)1,2 o3 o xx o

oo

xoo

o3

o

x

x

x

o

o o o

Fresh air intake kit (Chamber type)1,2






Cooling only

OPTIONS

37 38

------------------------------

Touch Controller

Indoor unit

Kit nameName of option FHQ35BVV1B FHQ50BVV1G FHQ60BVV1G

BRC7E531W

DCS302CA612

DCS301BA612

DST301BA612

KHFP5MA35

KAF501DA80KAF501DA56----------

KDU50N60VE

Remark

Kit nameName of option Remark

Touch Controller3

Replacement long-life filter

L-type piping kit (for upward direction)Remote controller

Resin net

Wireless type

Central remote controllerUnified ON/OFF controllerSchedule timer

Adaptor for wiringWiring adaptor for electrical appendices4

Interface adaptor for SkyAir seriesInstallation box for adaptor PCB

FFQ25BV1B FFQ35BV1BDecoration panel

Fresh air intake kit

Central remote controller3

Unified ON/OFF controller3

Schedule timer3

Adaptor for wiring2


Wiring adaptor for electrical appendices2

Sealing material of air discharge outletPanel spacer

Interface adaptor for SkyAir series

Installation box for adaptor PCB

Replacement long-life filter

Remote sensor (for indoor temperature)

DCS302CA61DCS301BA61

DCS601C51DST301BA61

KRP1BA57KRP4AA53KRCS01-1B

BYFQ60B8W1/BYFQ60B3W1

BRC1C61

KDBH44BA60KDBQ44BA60A

KDDQ44XA60

DTA112BA51

KRP1BA101

KAFQ441BA60

Note: 1Wiring for wired remote controller to be procured locally.2Installation box for adaptor PCB (KRP1BA101) is necessary. 3This optional accessory requires DTA112BA51.



Note: 1Wiring for wired remote controller to be procured locally.2This optional accessory requires DTA112BA51.3FHQ140CA is equipped standardly with the interface adaptor for SkyAir series. DTA112BA51 is unnecessary.4Installation box for adaptor PCB is necessary.

Remote controller Wireless type Cooling only

Cooling only

FHQ71BVV1B FHQ100BVV1B FHQ125BVV1B FHQ140CAVEB

KRP1BA54DCS601C512

DCS302CA613

DCS301BA613

DST301BA613

DCS601C513

KRP4AA52DTA112BA51KRP1CA93

KHFP5MA160

KAF501DA112 KAF501DA160

KDU50N125VE

KRCS01-1BKJB311AAKJB212AA

Remote sensor (for indoor temperature)Electrical box with earth terminal (3 blocks)Electrical box with earth terminal (2 blocks)

BRC1E62Navigation Remote Controller Wired type1Wired type1

BRC7EA66BRC1C61BRC1E62Navigation Remote Controller Wired type1

Wired type1

BRC1C61

Touch Controller2

Note: 1Wiring for wired remote controller to be procured locally.2The indoor unit is equipped standardly with the interface adaptor for SkyAir series. An option is unnecessary.3Installation box for adaptor PCB (KRP4AA93) is necessary.

WALL MOUNTED TYPEName of option Remark


Remote controller


Schedule timer2


Electrical box with earth terminal (3 blocks)Electrical box with earth terminal (2 blocks)

Kit nameFAQ100CVEA

DCS302CA61DCS301BA61DST301BA61DCS601C51KRP4AA51

KJB311AAKJB212AA

Drain-up kit


Noise filter ( For electromagnetic interface use only)

Remote sensor (for Indoor temperature) KRCS01-4B

FAQ71CVEAK-KDU572EVE

KRP4AA93

KEK26-1A

BRC7EB519Wireless type


Cooling only

Drain pump kitFresh air intake kit

----------

KDU50P140VEKDDQ50A140KAFP501A160

BRC7GA56

KRP1D93A

KHFP5N160

KRCS01-4B

Touch Controller4 DCS601C51

Note: 1Refer to page 10 for the details. 2Required for installing high-efficiency filter or ultra long-life filter. 3Wiring for wired remote controller to be procured locally.4The indoor unit is equipped standardly with the interface adaptor for SkyAir series. An option is unnecessary. 5Installation box for adaptor PCB (KRP1H98) is necessary.

Kit name

DCS302CA61BRC1E62

DCS301BA61DST301BA61

KRP1C63

KDDFP55B160

KDBH55K160FKDBP55H160FA

KKSJ55KA160

KDDP55B160KDDP55B160KKDDP55X160

KRP4AA53

KAFP551K160

KAFP556B80KAFP557B80KAFP552B80

KDTP55K80

KDJP55B160KDJP55B80BRC7F633FBRC1C61

KAFP553B80

KDTP55K160KAFP556B160KAFP557B160KAFP552B160KAFP553B160

BYCP125K-W1

KRP1H98

KAFP55B160KAFP55H160H

FCQ71LUV1 FCQ100LUV1 FCQ125LUV1FCQ50LUV1 FCQ60LUV1 FCQ140LUV1Name of option Remark

Chamber type

Decoration panel

Fresh air intake kit1



Schedule timer4

Adaptor for wiring5

Without T-joint pipe and fanWith T-joint pipe, without fan


Sealing material of air discharge outletPanel spacer

Chamber connection kit2Insulation kit for high humidity



High-efficiency filter(including chamber)

Filter chamber Replacement long-life filterUltra long-life filterReplacement ultra long-life filter

(Colorimetric method 65%)(Colorimetric method 90%)

Replacement high-efficiency filter

(Colorimetric method 65%)(Colorimetric method 90%)

Remote controller

Navigation Remote Controller

Wireless type

Wired type3Wired type3

Branch duct chamber

Remote sensor (for indoor temperature) KRCS01-4B



Cooling only

DIMENSIONS (Unit: mm)

39 40


Notes:1Sticking location for manufacture's label manufacture's label for indoor unit: Suction grille inner side's electric components box's lid surface manufacture's label for decoration panel : Decoration panel's corner decoration cover inner surface2In case of using wireless remote controller, this position will be a signal receiver. Refer to the drawing of wireless remote controller in detail.

3When the temperature and humidity in the ceiling exceed 30˚C and RH 80% or the fresh air is inducted into the ceiling or the unit continues 24 hour operation, an additional insulation (thickness 10mm or more of glasswool or polyethylene form) is required.

4Though the installation is acceptable up to maximum of 910mm square ceiling opening, keep the clearance of 35mm or less between the indoor unit and the ceiling opening so that

the panel overlap allowance can be ensured.5Please do not place the thing been damp and troubled under an indoor unit. When the case where humidity is 80% or more, and the drain outlet are choked up and the air filter are dirty, dew may fall.

950

8Pipe ConnectionSide

6

A arrow view

Drain ConnectionSide

Note 2

7

9509

860~

910(C

eiling

open

ing sp

ace) (N

ote 4)

420

C

710(Hanging bolt pitch)420

B

300or less

780(

Han

ging

bol

t pitc

h)

860~910(Ceiling opening space) (Note 4)

157

93

2x100=200 85

67

Connection positionof branch duct

C/L(round shape type)160


16-M4 Hole

167

(square-shaped type)B arrow view

160

95

81

350

29

213

29

350

80

160

ø100

Connection positionof fresh air intake kit

C/L 157

90

(direct installation type)

67

(knock hole)


C arrow view


2x100=

200

(round shape type)

(square-shaped type)

196

93

90

8025

95

160

20-M4Prepared hole

167

280

5028

8

80

167

95

157

340840

16510

4Hanging bolt

1

175

55

4-M8~M10Connection positionof branch duct(round shape type)


2

40

80

160

2x100=200

125


C/L

298

20

350

850

Adjus

table(

0~67

5) 55

29

330

160

16-M4 Prepared hole

160

1500

or m

ore

81

93

157

130


160

2x100=200

A

55


From th

e floor s

ide 250

0 or mo

re

(Note 4)

67

105

For h

eight

instal

lation

85

150

(requ

ired s

pace

)

350

42

29

64

(round shape type)

27-M4 Prepared hole

60

35 or less (Note 4)

35 or less

3


256

160 5

95

50

84055

167

The necessary space is 500mm or more when the air-outlet is blocked with the accessory.Moreover when the corner areas are blocked (both right and left of the blocked air outlet), the necessary space is 200mm or more.

1500mm or more200mm or more

1500mm or more

1500mm or more1500mm

or more200mmor more

Required space

95

330

165


160

20

16-M4 Prepared hole

50

350

12480

175

125

2


4 1157

246

55

4-M8~M10

2x100=200 80

124

10

Hanging bolt


C/L

110

(round shape type)

84055

280

256

40

Adjus

table(

0~67

5)

340

850


1500

or m

ore


20-M4 Prepared hole

60

From th

e floor s

ide 250

0 or mo

re

130

124

2x100=200

35 or less (Note 4)

55

A

150

84055

160

157256

105


For h

eight

instal

lation

42

(requ

ired s

pace

)

(Note 4)

95

3 85124

35 or less

5

(round shape type)

64

350

81

11050

124

81 2x100=200

350


160

16-M4 Hole

B arrow view

(round shape type)

110

C/L124

85

157


95


80

157

213

95

160

Connection positionof fresh air intake kit


C arrow view

(knock hole)90(round shape type)

124

183

109

25

C/L

124

802x1

00=200

(direct installation type)

ø100

20-M4Prepared hole



90

350

[FCQ50-140LUV1] [FCQ50-140LUV1]

[FCQ50-71LUV1] [FCQ50-71LUV1]

[FCQ50-71LUV1]

[FCQ50-71LUV1] [FCQ100-140LUV1]

[FCQ100-140LUV1]

[FCQ100-140LUV1] [FCQ100-140LUV1]

Liquid pipe connectionGas pipe connectionDrain pipe connectionTransmission wiring connectionRemote controller wiring connectionAir-outletSuction grilleCorner decoration coverDrain hose (accessory)

12345

6789

Indoor unitOPTIONS

Outdoor unitKit name

RZR71LVVM RZR100LVVMRZR50LVVM RZR60LVVM RZR125LVVM RZR140LVVM RZR100LUY1 RZR125LUY1 RZR140LUY1Central drain plugWire fixture for preventing overturning

Name of option

Fixture for preventing overturningDemand adaptor

Air direction adjustment grilleDrain plug One set includes 5 pieces for 5 units

Kit nameName of option Remark RKS25AVMG RKS35AVMGKPW937A4KKP937A4

KKPJ5F180K-KYZP15CKPT-60B160

KKPJ5G280----------

KKTP5B112

KKP014A4------------------------------ KRP58M51

Refrigerant branch piping kit For twin multi ---------- KHRP58P216T ---------- KHRP58P216T

KDAJ25K71A

FBQ71DV1FBQ60DV1FBQ50DV1 FBQ100DV1 FBQ125DV1 FBQ140DV1

Service panel

Air discharge adaptor

Adaptor for wiring (interlock for fresh air intake fan)

Remote controller Wireless type

Name of option Remark

Filter chamberReplacement long life filterReplacement long life filter chamber kit

High-efficiency filter1 65%90%

BRC4C64

KTB25KA80WKTBJ25K80FKTBJ25K80T

KTB25KA160WKTBJ25K160FKTBJ25K160T

KAF372AA80KAF373AA80

KAF372AA160KAF373AA160

KDDF37AA80 KDDF37AA160KAF371AA80 KAF371AA160KAF375AA80 KAF375AA160

KDAJ25K140A

BRC1C61

KRP1C64BRC1E62Navigation Remote Controller Wired type2

Wired type2



Schedule timer3

Wiring adaptor for electrical appendicesRemote sensorMounting plate for adaptor PCB.4

DCS301BA61DCS302CA61

DST301BA61

KRCS01-4BKRP4A96 5,6

KRP4AA51

Note: 1If installing a high efficiency filter on the unit, an assembly chamber for either bottom or rear suction is required. 2Wiring for wired remote controller to be procured locally. 3The indoor unit is equipped standardly with the interface adaptor for SkyAir series. An option is unnecessary. 4Mounting plate for adaptor PCB is necessary for each adaptor marked . 5Up to 2 adaptors can be fixed for each mounting plate.6Only one mounting plate can be installed for each indoor unit.

DCS601C51Touch Controller3

Kit name

BRC1C61

FBQ50BV1AKTB25KA56W KTB25KA80WKDAJ25K56A KDAJ25K71A

FBQ60BV1A FBQ71BV1A


Service panelAir discharge adaptor

Adaptor for wiring (interlock for fresh air intake fan)Wiring adaptor for electrical appendicesInterface adaptor for SkyAir series

Remote controller Wireless type

Kit nameName of option Remark



Schedule timer2

Note: 1Wiring for wired remote controller to be procured locally. 2This optional accessory requires DTA112BA51.

Touch Controller2

KRP4AA51KRP1BA54

DTA112BA51

BRC4C62

DCS301BA61DCS302CA61

DST301BA61DCS601C51


Heat pump

Kit name

Air direction adjustment grilleDrain plug One set includes 5 pieces for 5 units

Name of option Remark RXS60FVMARXS50FAVMA RXS71FVMAKPW945A4

KKP937A4 KKP945A4

FLOOR STANDING TYPEKit nameName of option FVQ71CVEB FVQ100CVEBFVQ50CVE FVQ60CVE

DCS302CA61DCS301BA61DST301BA61

KAFJ95L160

Remark

Touch Controller2

Replacement long-life filterBRC1C61Remote controller

Navigation Remote ControllerCentral remote controller2


Schedule timer2

Adaptor for wiring3

Wiring adaptor for electrical appendicesInstallation box for adaptor PCB

Note: 1Wiring for wired remote controller to be procured locally. 2The indoor unit is equipped standardly with the interface adaptor for SkyAir series. An option is unnecessary.3Installation box for adaptor PCB (KRP4AA95) is necessary.

FVQ125CVEB FVQ140CVEB

KRP1BA57DCS601C51

KRP4AA52KRP4AA95

BRC1E62Wired type1Wired type1

62.5

Note)4.

210

(Direct connection)Outdoor air intake

Ceiling

4–M4 Hole

4–M8 to M10

2

25

62.5

285

Hanging bolt

172

arrow view

3

750

4

585–660 (Ceiling opening space)

320

For h

eight

instal

lation

21145 or less

183

1

295 o

r mor

e

1500

or m

ore55

300 or less

575

585–

660 (

Ceilin

g ope

ning s

pace

)

196

5

150

Adjus

table(

0–54

5)

45 or less

89

89

145

Note)2.

1500mm or more*

1500mm or more*

Required space

1500mm or more*

1500mm or more*575

6

700

62.5

260

533 (Hanging bolt pitch)

2500

or m

ore

From

the f

loor s

ide

100

62.5

205

(180

)

Drain connection side

Piping connection side

320

A

A

B

(Req

uired

spac

e)53

3 (H

angin

g bo

lt pitc

h)

7arrow view

700

B

30

8

*When the discharge grill is closeout, the required space is 200mm or more.


41 42

6

φ80 hole

5

φ80 hole

894

Approx.475

52

105

104

98

Piping and Wiring intakeOutside line

14.5

44

Mounting location 460

44

Approx.390Approx.345

8

120 or less

For installation in high spaces

50 o

r mor

e

2500 or more

30 o

r mor

e(R

equi

red

spac

e)(R

equi

red

spac

e)

Piping direction

2 19

238

Approx.400

290

240

Dimensions for full open front panel

3

50 or moreName plate Note)2

50 or morePiping directionPiping direction

1050

7

(Requred space) (Requred space)

WALL MOUNTED TYPE

[FAQ71CVEA]

Front panelFront grillAir outletGas pipeLiquid pipeDrain hoseEarth terminalRight side pipe connection holeLeft side pipe connection hole

123456789

Notes:1

2

3

Location of unit's of Name Plate:Right side surface of casingIn case of using wireless remote controller, this position will be a signal receiver. Refer to the drawing of wireless remote contorller in detail.Please do not place the thing been damp and troubled under an indoor unit. when the case where humidity is 80% or more, and the drain outlet are choked up and the air filter are dirty, dew may fall.

235

Hanging bolt1

30 or more1590(Service space)

4-M8~M10

(Service space)30 or more

11

131

197

6 57

o/ 45

91

4 5

14

83

156

6

268

42

221

Drain pipe connection VP20(For left piping)

763 5

(Note.2)Brand name plate

7

The Front

214268

105

195

156

189100

8

210

1550

260

57

210

163

2018

116

(Han

ging

bo

lt pi

tch)

(Hanging bolt pitch)

17

30

105

16

87

131 35

102

10

13

300 o

r mor

e

197

690

57

ObstacleFloor side

(Req

uire

d sp

ace)

(Requi

red sp

ace)

5Fo

r heig

ht ins

tallat

ionFro

m the

floor si

de 250

0 or m

ore

19 103

(Req

uire

d sp

ace)

5

220

15

175

Position : Hole of wall for taking out in piping back(View from the front)

40

59

115

63

Connection position of fresh air intake kit12090

51

90

φ100(Knock out hole) 9

15792

175

13412

63

60Position slit hole for taking out in piping back

(View from the front)

Notes:1

2

3

Location of unit's Name Plate: Bottom of fan housing inside the suction grille.In case of using wireless remote controller, this position will be a signal receiver. Refer to the drawing of wireless remote controller in detail.Please do not place the thing been damp and troubled under an indoor unit.When the case where humidity is 80% or more, and the drain outlet are choked up and the air filter are dirty, dew may fall.


[FHQ140CAVEB]

1234567891011121314151617181920

Air discharge grilleAir suction grilleAir filterGas pipe connectionLiquid pipe connection Drain pipe connectionEarth terminal (inside the control box) (M4)HangerRear piping penetration coverTop panel penetration coverRight side pipe connection Left back drain pipe connection Left side drain pipe connection Right side drain pipe connection Hole of wall for taking out in piping back Upward drain pipe connection Upward gas pipe connection Upward liquid pipe connectionPower supply wiring and a unit wiring back connectionPower supply wiring and a unit wiring upper connection

The Front



4-M8~M10Hanging bolt

(Note.2)Brand name plate

Position slit hole for taking out in piping back

(For left piping)Drain pipe connection VP20

80 80

225

275

170105

170

127

142 58

36

85 160

192102

185

10590

210

260

195

300

275

105

135

5

For h

eight

instal

lation

300 o

r mor

e(Re

quired

space

)

From t

he floo

r side

2500 o

r more

ObstacleFloor side

55

680

515

5

145 60

6511

560

65

135

40 50 60

912

13 15590

40

11

14

15

18 17 16

10

5

4

42

6

57

1

6

8

3

Position : Hole of wall for taking out in piping back(View from the front)

(View from the front)

o/ 45 55

80

(Hanging position)A

B

(Han

ging

p

ositi

on)

(Req

uire

d sp

ace)

(Req

uire

d sp

ace)

123456789101112131415161718

Air discharge grilleAir suction grilleAir filterGas pipe connectionLiquid pipe connection Drain pipe connectionEarth terminal (inside the electric components box)(M4)Suspension bracketBackward pipe and wiring connection opening lidUpward pipe and wiring connection opening lidRight side pipe connection Left back drain pipe connection Left side drain pipe connection Right side drain pipe connection Hole of wall for taking out in piping back Upward drain pipe connection Upward gas pipe connection Upward liquid pipe connection

Notes:1

2

3

Location of unit's Name Plate: Bottom of fan housing inside the suction grille.In case of using wireless remote controller, this position will be a signal receiver. Refer to the drawing of wireless remote controller in detail. (Applies to FHQ35-71BV only)The remote control code is the standard <about 3 m outside the machine> attached.(0.5 mm2 2 wicks O.D. 5.4)(It is not attached to VRV.)

A92011201120112013601550

B96011601160116014001590

FHQ35BVV1B

FHQ71BVV1BFHQ100BVV1B

FHQ50BVV1GFHQ60BVV1G

FHQ125BVV1B


Liquid pipe connectionGas pipe connectionDrain pipe connectionPower supply connectionRemote control code and control wiring connectionAir discharge grilleSuction grilleDrain hose

12345

678

Notes: 1Sticking location for manufacture's label manufacture's label for indoor unit : on the bell mouth inside suction grille manufacture's label for decoration panel : on the inner frame inside suction grille2In case of using wireless remote controller, this position will be a signal receiver. refer to the drawing of wireless remote controller in detail.3When the temperature and humidity in the ceiling exceed 30˚C and RH 80% or the fresh air is inducted into the ceiling or the unit continues 24 hour operation, an additional insulation (thickness 10mm or more of glasswool or polyethylene form) is required.4Though the installation is acceptable up to maximum of 660mm square ceiling opening, keep the clearance of 45mm or less between the main unit and the ceiling opening so that the panel overlap allowance can be ensured.


[FHQ35-125BV]



(SAME AS THE INDOOR UNIT SIZE OR MORE)

Fig.AAir outlet

Inspection hatch 1(450mmX450mm)

Air inletUnit base

Control box

200

or le

ss

CASE 1)

300

or m

ore

Inspection hatch

Control box

Ceiling

150

215

View

165 49

1160

245

(From the Air outlet)

7X150=1050

(All around)20-8X12 oblong hole635

1185

40

232

212

167

(467 or

less) 3

300

7169

1

(A ca

se w

ithou

t the

ceilin

g)

6

2X65

=130

290

(Not

e.4)

300 o

r mor

e

4

2

2814

4

700

11

700

or le

ss

5

3X65

=195

2500

or m

ore

Air outlet

Floor surface

Air inlet (Note.2)

Ceiling

Adjus

table

80

20-8X12 oblong hole

8X150=1200

1350

150

713300 or less

150 27

7

1325

12(All around)

247

(From the Air inlet)

(Ser

vice

spac

e)

27 63140- 4.7 Hole(All around)

48- 4.7 Hole

1438

(Han

ging

bol

t pitc

h)

700 or more

(Hanging bolt pitch)

9

16X6

5=10

40

(All around)8

10

19X6

5=12

35

450

or m

ore

200

or le

ss14

00

(Service space)

1205

65

Air inlet

Inspection hatch 450 or more

Air outlet

200

or less

Control box


700 or more

(SAME AS THE INDOOR UNIT SIZE OR MORE)

Inspection hatch 2

1400

or more 170

0 or m

ore

Control box

(SAME AS THE INDOOR UNIT SIZE +300 OR MORE)

Inspection hatch 3

700 or more

View B-2

CASE 2),3)

CeilingInspection hatch

B

20

or m

ore

Control box

View B-1

According to any one of below 1)~3),secure a space for service works,such as,checking and maintenance of control box,etc.

1)One inspection hatch (450X450) on the control box side and a space of 300mm or more under the unit.(Fig.A)2)One inspection hatch (450X450) on the control box side and 2 (two) inspection hatches under the unit.(Arrow View B-1)3)3 (three) inspection hatches under the unit and the control box.(Arrow View B-2)

Notes: 1Location of MANUFACTURE'S LABEL: Control box surface2Mount the air filter at the suction side.(Select its colorimethod (gravity method) 50% or more.3Do not locate things should not be wet under the indoor unit.Dews may drop when humidity reaches over 80%,or a drain gets stuck,or air filters are not clean.4Space for Service Works

[FBQ100/125/140DV1]

43 44

Liquid pipe connectionGas pipe connectionDrain pipe connectionEarth terminal(Terminal in Control box)Control box(Inside)Remote control wiring connectionPower supply wiring and a transmission wiringAir discharge flangeAir suction flangeHangerSocket (for maintenance)Drain hose(Accessory)

1234

56

7

89101112


(From the Air inlet)

12

247

513

277

80

925

18-8X12 oblong hole

6X150=900

300 or less

950

150

(All around)

150

(Service space)

59

Air outlet Air inlet

Inspection hatch 450 or more

10

13X6

5=84

5

8

450

or m

ore 20

0 or

less

1038

(Han

ging

bol

t pitc

h)

9

65

631

805

1000

700 or more

27(Hanging bolt pitch)

11X6

5=71

5(S

ervi

ce s

pace

)

30- 4.7 Hole(All around) 30- 4.7 Hole

(All around)

16-8X12 oblong hole(All around)

(From the Air outlet)

760

435

View

245

150

785

165 5X150=750

215

49

Air inlet(Note.2)

Adjus

table

Floor surfaceCeiling

Air outlet

700

144

167

11

212

6

169290

(467 o

r less) 2

700

or le

ss

300

or m

ore

300

7 4

2500

or m

ore

3

3X65

=19540

(A c

ase

with

out

the

ceilin

g)

(Not

e.4)

1

28

5

232

2X65

=130

Ceiling

Control box

300

or m

ore

Inspection hatch

Inspection hatch 1 (450mmX450mm)

Control box

200

or le

ss

Fig.AAir outlet

Unit baseAir inlet

CASE 1)

View B-1

CASE 2),3)

Ceiling

20

or m

ore

Inspection hatch

Control box

B

Inspection hatch 2(SAME AS THE INDOOR UNIT SIZE OR MORE)

200

or le

ss10

00

or mo

re


700 or more

Control box

View B-2

700 or more

1300

or

mor

e

(SAME AS THE INDOOR UNIT SIZE +300 OR MORE)

Inspection hatch 3

Control box

According to any one of below 1)~3),secure a space for service works,such as,checking and maintenance of control box,etc.

1)One inspection hatch (450X450) on the control box side and a space of 300mm or more under the unit.(Fig.A)2)One inspection hatch (450X450) on the control box side and 2 (two) inspection hatches under the unit.(Arrow View B-1)3)3 (three) inspection hatches under the unit and the control box.(Arrow View B-2)

Notes: 1Location of MANUFACTURE'S LABEL: Contro box surface2Mount the air filter at the suction side. (Select its colorimethod (gravity method) 50% or more.)3Do not locate things should not be wet under the indoor unit. Dews may drop when humidity reaches over 80%,or a drain gets stuck,or air filters are not clean.4Space for Service Works

[FBQ50/60/71DV1]

Liquid pipe connectionGas pipe connectionDrain pipe connectionEarth terminal(Terminal in Control box)Control box(Inside)Remote control wiring connectionPower supply wiring and a transmission wiringAir discharge flangeAir suction flangeHangerSocket (for maintenance)Drain hose(Accessory)

1234

56

7

89101112

630

A

D

57Service space300 or moreG

60

Suspension bolt50E

65

27

B

800

45 46

440315

25 25

145

600

Fresh sir intake position

160 P.C.D.

(Knock hole)

6-M5 Hole(Circumference)

19512

013

5

J

228

20015067

13515

021

524

530

030

0Se

rvice

spac

eNo

te)2

160

150

208

250

100

(Sus

pens

ion

posi

tion)

(Suspension position)7 8

10

26 4

13 5

9

2 6

5=13

0

3

65= 1

95

F

C

H

I

viewA

viewB

AB

125

Approx.4005

65

454

45

Piping and Wiring intake

79.5

Approx.465

6

Mounting location

φ80 hole

114

1085

14.5

φ80 hole

Outside line

Approx.46089

35.5

Piping direction

(Req

uire

d sp

ace)

(Req

uire

d sp

ace)

120 or less

8

2500 or moreFor installation in high spaces

50 o

r mor

e30

or m

ore

(Requred space) (Requred space)1200

7

50 or more 50 or morePiping directionName plate Note)2Piping direction3

9

Approx.440

Dimensions for full open front panel

242

340

2 1

240

WALL MOUNTED TYPE

[FAQ100CVEA]

Front panelFront grillAir outletGas pipeLiquid pipeDrain hoseEarth terminalRight side pipe connection holeLeft side pipe connection hole

123456789

Notes:1

2

3

Location of unit's of Name Plate:Right side surface of casingIn case of using wireless remote controller, this position will be a signal receiver. Refer to the drawing of wireless remote contorller in detail.Please do not place the thing been damp and troubled under an indoor unit. when the case where humidity is 80% or more, and the drain outlet are choked up and the air filter are dirty, dew may fall.

Liquid pipe connection Gas pipe connectionDrain pipe connectionInterunit wiring portPower wiring portDrain holeDischarge flangesuction flangeSwitch boxInspection hole

12345678910


856

Notes: 1Location of unit's Name Plate: Fan hosing surface.2If the ceiling is not removable, a 300 mm service space must be kept between the unit and the ceiling.3Mount the air filter at the suction side. (Select its colorimethod (Gravity method) 50 % or more)

A B C D G

833 6X120=720 1000 785FBQ60BV1A/71BV1A556 533 4X120=480

F

5X150=7503X150=450

H

11X65=7156X65=390

I

12X65=7807X65=455700

E

760460 485

J

1050750FBQ50BV1A

[FBQ50/60/71BV1A]

OUTDOOR UNIT // RXS50FAVMA, RXS60FVMA

OUTDOOR UNIT // RKS25/35AVMG

This model to be fixed with fixture as shown below.

In case of fixing it at the bottomIn case vibration resistance is required, fix it at both the bottom and the rear.

50 or more

1500 or more

50 or more

Required space

AB

100

C

50

Detail

0.7

Suction grille stopper

(Two both sides)

18

2-7X15 oblong hole

184 184

(For wood screw)

(Accessory)

330 30

Fixture

95

6

66E

G

68

Full open position of suction grille

H

Pull out direction of air-filter

F

D

75

KJ

L

740

or m

ore

(Pull

out d

imen

sion o

f air-

filter

)

5010

0

Approx.46

2

1

3

5

4

200

34 223

825

600

1850

314

253

95

598

677

616

541

8

9

10

130 215 126

PN

260

M

130

View

7

4- 14 Hole(For bolt)


45 46

OUTDOOR UNIT // RXS71FVMA

Wall height on air outlet side =less than 1200

100

350

100 10

035

0

350

50 5050

Minimum space for air passage

4–cuts for anchor bolts(M12)

Name plateTerminal strip with earth terminal

Outdoor air thermistor

Interconnecting pipingand wiring inlet

900620 140

45 376 191

78108

104 3067

7110

2

320

3035

0(3

45-3

55)

380

117

3077

0

410

50 126

90 Gas pipe(o/ 15.9 single union)

Liquid pipe(o/ 6.4 single union)

Gas stop valve

Liquid stop valve

Drain outlet(I. D o / 25 hose for connection)

Wall height on air outlet side =less than 1200

100

350

100

100

350

350

50 50

50

Minimum space for air passage

4 –Holes for anchor bolts(M8 or M10)

Name plateBrand name label

In case of removingstop valve cover

Terminal strip with earth terminal

Outdoor air temperature thermistorWiring inlet

Service port

825

155 1830160

78325

5801242

350

330

300

8964

10 25

735

36

Gas stop valve (o/ 12.7 CuT)

Liquid stop valve(o/ 6.4CuT)

Drain outlet(I.D. o / 15.9 hose for connection)

Liquid

Handle

285

Drain outlet(I.D φ15.9 hose for connection)

8 12

550

765

Brand name label

4 - Holes for anchor bolts

63

Wiring

Service

In case of removing196

105 16

5

Gas stop valve

22

Outdoor air thermistor

(M8 or M10)

311

13

29.5

574490

105.5

inlet

port

( 9.5CuT)

stop valve cover

( 6.4CuT)stop valve

Indication label

Manufacture'sLabel

100

150

150

5010

0

300

50 50

50

Wall height on air outlet side =less than 1200Minimum space for air passage

FLOOR STANDING TYPE

Notes: 1Sticking location for manufacturer’s label: on the surface of cover of switch box inside the suction grille. 130

A

FVQ100/125/140CVEB50

190

B110

266

C186

350

D270

44

E45

49

F50

130

G50

190

H110

260

J180

266

K186

322

L242

79

M57

202

N144

229

P149FVQ50/60CVE, 71CVEB

Suction grilleAir filterThrough hole for side piping(70x90 oblong slit hole)Through hole for side piping( 80 slit hole)Through hole for side piping( 27 slit hole)Through hole for rear piping/wiring(80x130 oblong slit hole)Through hole for bottom piping/wiring(126x130 square hole)Liquid pipe connectionGas pipe connectionDrain pipe connection

123

4

5

6

7

8910

OUTDOOR UNIT // RZR125/140LVVM, RZR100/125/140LUY1

47 48

30

223

5

52

13

7

6

67

5595

53

19137645

102

117

70

16

71 16

58

5

8

5

7

95

19

84

80

54

145

55

6

142

2

3

6

89

7

19

5

423

1170

4

422

9554

900

1

60 89

94

61

30

350

(345

~355

)

43

620

320

41

140

30

140

Hole for anchorbolt 4-M12

Gas pipe connectionLiquid pipe connectionService portEarth terminalRefrigerant piping intakePower supply wiring intakeTransmission wiring intakeDrain outlet

12345678


6

5

13

52

7

55

5395

67

223

30

53

56

7

95

80

145

19

5584

3038

350

(345

~355

)

320

91

37

620160

30

Hole for anchor bolt 4-M12

160

55

279

90

16

285

36

416

260

262

595

68

8 16

161

5

61

340

940

95

60

5

3

990

89

7 689 53

2

1

142

4

19

339

OUTDOOR UNIT // RZR100LVVM

Gas pipe connectionLiquid pipe connectionService portEarth terminalRefrigerant piping intakePower supply wiring intakeTransmission wiring intakeDrain pipe connection

12345678

595

559

200

94

449

509

419299

21Drain outlet

Drain outlet

163 112

272

479

269

Wiring inletName plate

20

573.5

845

342

778

2030

0300

131

326

Drain outletI.D. 18 hose for connection

Hole for anchor bolts (M8 or M10)

Liquid stop valve( 9.5CuT)

Earth terminal in switch box

Service port

Gas stop valve( 15.9CuT)

6010

5

Service port 144

OUTDOOR UNIT // RZR50/60/71LVVM

Installation service space for outdoor unit

1000

or more

300

or more

L H

L H

H

L

500

or more

100

or more

L H

For RZR50-140LVVM, RZR100-140LUY1

300

or more

1000 or more

200 or more

100

or more

100 or more 100 or more

100

or more

500 or more

When there are obstructions on the inlet side and both lateral sides

2. For series installation (more than two units)When there are obstructions on both sides

1. For single unit installation When there is an obstruction only on the inlet side

1. For single unit installation When there is an obstruction on the inlet side

2) When there is an obstruction in the overhead space

When there are obstructions on both sides

When there are obstructions on the inlet side and both lateral sides

2. For series installation (more than two units)

1. For single unit installation






100

or more

500 or less

1000

or m

ore

An obstruction in the overhead space

500 or less

500 or more

1000

or m

ore


500 or less

1000 or more

1000

or m

ore


150

or more


500 or less

1000

or m

oreAn obstruction

in the overhead space

300

or more

1000 or more

200 or more

500 or less

1000

or m

ore


1.RZR50/60/71LVVM 2.RZR100-140LVVM, RZR100-140LUY1

21

21

21

21

21

21

21

21

21

21

21

21

1000 or more

49 50

1) When the overhead space is open

2) When there is an obstruction in the overhead space

1) When the overhead space is open

When there is an obstruction on the inlet side1 When there is an obstruction on the outlet side2

1000

or m

ore

500 or less


150 or more

500 or less

200

or more

1000 or more 250 or more 250 or more

1000

or m

ore

250 or more200

or more250 or more

1000 or more

1000

or

mor

e

100 or more

500 or less

500

or more

50 or more

500

or more

50

or more

250 or more

1000

or m

ore

500 or less

1000 or more

1000 or more

250 or more

250 or more

1000

or more

200

or more

500 or more

500 or less

1000

or m

ore

100 or more


1) When the overhead space is open (There is no limit to the height of the obstruction on the outlet side.)

When there are obstructions on both the inlet and outlet sides(When the obstruction on the outlet side is higher than the unit itself)

3

Note : As for other patterns of installation, please refer to Installation manual or Engineering Data Book.

REMOTE CONTROLLER

Wired type

Staple

Remote controller

17

17

0~5

117

Remote controller

Remote controller

(Between remote controller and control box)

17

• Installation methodA Exposed body, exposed cord C Exposed body, embedded codeB Exposed body, embedded cord

Conduit

Control box

Through hole

Size

Specifications of cord

0.75~1.25 mm2

Total length 500 m

Type Shield wire (insulated thickness: 1 mm or more)Note) 1. Remote controller cord and staple are not

attached. They are field supplied parts.

120

120

17 18

42

84

38

Cord outlet hole2823

46

• Remote controller dimensions

Wireless type

CEILING MOUNTED CASSETTE TYPE <Round Flow>• Remote controller dimensions

• Remote controller holderinstallation procedure<installation to wall surface>

• Receiver installation procedure

• Receiver detail

Transmitting part

157

62 17.5

Liquid crystalremote controller(wireless)

Remote controllerholder

CEILING MOUNTED BUILT-IN TYPEDUCT CONNECTION MIDDLE and HIGH STATIC PRESSURE TYPE

120

72 83.5

106

(Ceil

ing o

penin

g)

70 180.5

35 49

Service space for ceiling installation

• Receiver detail

Note :

Mor

e th

an 9

0(S

revi

ce s

pace

)

(Ceiling opening)

2-5x9 Slot

Switch box(field Supplied parts)

Do not install more than 3 receivers in the vicinity of one another.With 4 or more units, there is always the possibility of malfunction

( 12- 16)

Receiver

Drain pipingside

Refrigerantpiping side

Decoration panel

Receiver

Drain pipingside

Refrigerant piping side

Decoration panel(BYFQ60BW1)(BYFQ60B7W1)(BYFQ60B8W1)

COMPACT MULTI FLOW CEILING MOUNTED CASSETTE TYPE• Receiver installation procedure

WALL MOUNTED TYPE• Receiver installation procedure

• Receiver detail

BRC1C61

19

Upper case Lower case

40

2346

2848.5

4284

5X7 oblong hole

Code outlet hole5X15 oblong hole

Lower case portion

Lower case portion

Staple

19

A Exposed cord C Embedded cord(use switch box)

B Embedded cord

84

46Switch box for two switchex.) KJB211A(optional accessory)

Condit

19

0~5

Switch box [field supplied part]

(Between remotecontroller and control box)

48.5

19

Note)2Through hole

40

( 8- 10)

84

28

Switch box for one switchex.) KJB111A(optional accessory)

• Installation method

2.If the hole size is too large or the location is not proper, the hole may come out from the remote controller.

Note) 1. Remote controller cord and staple are not attached. They are field

supplied parts.

Size

Specifications of cord

0.75~1.25 mm2

Total length 500 m

Type Vinyl cord with sheath or cable (insulated thickness: 1mm or more)

BRC1E62

(Green)120

120

　　　Operationlamp

Top left outlet

Left outlet

Top centeroutlet

CEILING SUSPENDED TYPE• Receiver installation procedure

• Receiver detail

The Front

• Receiver detail

ReceiverReceiver


daikin airconditioning (singapore) pte. ltd. · floor standing type compact multi flow ceiling...

Documents